linux-kernel - Re: BISECTED: 2.6.29-rc2 regression: hibernation hang on eeepc-701

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 23 Jan 2009 23:06:32 +0100
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Alan Jenkins <alan-jenkins@...fmail.co.uk>
Cc:	kernel-testers@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-pm@...ts.linux-foundation.org, Pavel Machek <pavel@...e.cz>,
	Jesse Barnes <jbarnes@...tuousgeek.org>
Subject: Re: BISECTED: 2.6.29-rc2 regression: hibernation hang on eeepc-701

On Friday 23 January 2009, Alan Jenkins wrote:
> Rafael J. Wysocki wrote:
> > On Thursday 22 January 2009, Alan Jenkins wrote:
> >   
> >> Rafael J. Wysocki wrote:
> >>     
> >>> On Thursday 22 January 2009, Alan Jenkins wrote:
> >>>   
> >>>       
> >>>> Alan Jenkins wrote:
> >>>>     
> >>>>         
> >>>>> Hibernation hangs just after writing the image.  With s2disk I can see
> >>>>> this from the console messages.  The same hang happens with kernel
> >>>>> swsusp ('echo disk | sudo tee /sys/power/state'), and I can see that
> >>>>> the image has been written from the HDD led.
> >>>>>
> >>>>> In either case, I can still hard-power-off and resume from hibernation.
> >>>>>
> >>>>> It doesn't hang if I use the shutdown method (either 'echo shutdown |
> >>>>> sudo tee /sys/power/disk' or  's2disk -P "shutdown method=shutdown"').
> >>>>>   
> >>>>>       
> >>>>>           
> >>>> I've bisected this to commit 571ff7584bb9e05fca0eb79752ae55a46faf3a98. 
> >>>> It doesn't revert cleanly from RC2.
> >>>>
> >>>> I think it's distinct from the other two reported suspend regressions. 
> >>>> I'm not using acpi-cpufreq, and the issue doesn't affect resume.
> >>>>     
> >>>>         
> >>> It looks distinct.
> >>>
> >>> Do you suspend this box to RAM and does it work?
> >>>   
> >>>       
> >> Yes, I do use STR on it occasionally, and it still works in RC2.
> >>
> >>     
> >>> Please retest with the appended patch applied.
> >>>   
> >>>       
> >> That fixes it.
> >>     
> >
> > OK, it won't hurt to apply it.
> >
> > Still, the hardware or the BIOS in your box seems to be broken, or both, so I'd
> > like to debug it a bit more if you don't mind.
> >
> > Can you please test the patch below instead of the previous one?
> >   
> 
> It hangs at the same point as the unpatched RC2.  As before, it doesn't
> hang if I use "shutdown" instead of "platform".
> 
> Going by sysfs, I have 4 PCI devices without a kernel driver.
> 
> 8086:2592   Mobile 915 Express Graphics Controller
> 8086:2792   Mobile 915 Express Graphics Controller (driven by X)
> 8086:2448   82801 Mobile PCI Bridge
> 8086:2641   82801FBM (ICH6M) LPC Interface Bridge

The bridges shouldn't be affected, so I bet on the graphics.

It seems that the BIOS doesn't expect it to be in D3 while entering S4,
although it apparently doesn't mind it to be in D3 while entering S3.

I blame the Asus BIOS writers. ;-)

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/