[ 0.000000] Linux version 2.6.29-rc3 (root@coyote.coyote.den) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP PREEMPT Thu Jan 29 08:52:29 EST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:400 generic_get_mtrr+0xfa/0x110() [ 0.000000] Hardware name: System Product Name [ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up. [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.29-rc3 #3 [ 0.000000] Call Trace: [ 0.000000] [] warn_slowpath+0x86/0xa0 [ 0.000000] [] ? up+0x2b/0x40 [ 0.000000] [] ? release_console_sem+0x1a4/0x1c0 [ 0.000000] [] ? up+0x2b/0x40 [ 0.000000] [] ? up+0x2b/0x40 [ 0.000000] [] ? printk+0x1b/0x20 [ 0.000000] [] ? pat_init+0x7f/0xa0 [ 0.000000] [] generic_get_mtrr+0xfa/0x110 [ 0.000000] [] mtrr_trim_uncached_memory+0x7a/0x340 [ 0.000000] [] ? mtrr_bp_init+0xd1/0x6f0 [ 0.000000] [] ? e820_end_pfn+0xc6/0xf0 [ 0.000000] [] setup_arch+0x43c/0x9a0 [ 0.000000] [] ? printk+0x1b/0x20 [ 0.000000] [] start_kernel+0x6c/0x300 [ 0.000000] [] ? reserve_ebda_region+0x56/0x70 [ 0.000000] [] i386_start_kernel+0x7c/0xb0 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] RAMDISK: 37cfb000 - 37fefa33 [ 0.000000] Allocated new RAMDISK: 00100000 - 003f4a33 [ 0.000000] Move RAMDISK from 0000000037cfb000 - 0000000037fefa32 to 00100000 - 003f4a32 [ 0.000000] ACPI: RSDP 000F7D20, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT DFEE3100, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP DFEEADC0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aEventBlock: 32/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aControlBlock: 16/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in PmTimerBlock: 32/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 128/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for Pm1aEventBlock: 8, using default 32 [20081204] [ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for Pm1aControlBlock: 8, using default 16 [20081204] [ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for PmTimerBlock: 8, using default 32 [20081204] [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT DFEE3280, 7ACE (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS DFEE0000, 0040 [ 0.000000] ACPI: HPET DFEEB000, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG DFEEB080, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC DFEEAF00, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3718MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 00000000 - 379fe000 [ 0.000000] bootmap 00012000 - 00018f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000400000 - 00007ba374] TEXT DATA BSS ==> [0000400000 - 00007ba374] [ 0.000000] #4 [00007bb000 - 00007c3000] INIT_PG_TABLE ==> [00007bb000 - 00007c3000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000100000 - 00003f4a33] NEW RAMDISK ==> [0000100000 - 00003f4a33] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] free_area_init_node: node 0, pgdat c06eba00, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7437 pages used for memmap [ 0.000000] HighMem zone: 813013 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at e0000000 (gap: dff00000:10100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038958 [ 0.000000] Kernel command line: ro root=LABEL=/ rhgb quiet nomodeset [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] CPU 0 irqstacks, hard=c076b000 soft=c0763000 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2209.330 MHz processor. [ 0.000999] spurious 8259A interrupt: IRQ7. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 4147036k/4718592k available (2175k kernel code, 44884k reserved, 925k data, 336k init, 3281800k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfff51000 - 0xfffff000 ( 696 kB) [ 0.000999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000999] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000999] .init : 0xc070c000 - 0xc0760000 ( 336 kB) [ 0.000999] .data : 0xc061fc1e - 0xc0707020 ( 925 kB) [ 0.000999] .text : 0xc0400000 - 0xc061fc1e (2175 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] hpet clockevent registered [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4418.66 BogoMIPS (lpj=2209330) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] using C1E aware idle routine [ 0.000999] Checking 'hlt' instruction... OK. [ 0.004208] Freeing SMP alternatives: 10k freed [ 0.004210] ACPI: Core revision 20081204 [ 0.016157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026168] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.026999] CPU 1 irqstacks, hard=c076c000 soft=c0764000 [ 0.026999] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4420.12 BogoMIPS (lpj=2210060) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.097728] CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.097735] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.098078] CPU 2 irqstacks, hard=c076d000 soft=c0765000 [ 0.098080] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.000999] Initializing CPU#2 [ 0.000999] Calibrating delay using timer specific routine.. 4419.99 BogoMIPS (lpj=2209998) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.169651] CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.169660] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.170069] CPU 3 irqstacks, hard=c076e000 soft=c0766000 [ 0.170072] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.000999] Initializing CPU#3 [ 0.000999] Calibrating delay using timer specific routine.. 4420.00 BogoMIPS (lpj=2210003) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.241676] CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.241685] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.242025] Brought up 4 CPUs [ 0.242028] Total of 4 processors activated (17678.78 BogoMIPS). [ 0.243150] net_namespace: 532 bytes [ 0.243367] NET: Registered protocol family 16 [ 0.243662] ACPI: bus type pci registered [ 0.243797] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.243799] PCI: MCFG area at f0000000 reserved in E820 [ 0.243801] PCI: Using MMCONFIG for extended config space [ 0.243803] PCI: Using configuration type 1 for base access [ 0.245550] bio: create slab at 0 [ 0.246494] ACPI: EC: Look up EC in DSDT [ 0.257194] ACPI: Interpreter enabled [ 0.257198] ACPI: (supports S0 S5) [ 0.257209] ACPI: Using IOAPIC for interrupt routing [ 0.268949] ACPI: No dock devices found. [ 0.268962] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.269191] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.269202] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.269206] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.269225] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.269230] pci 0000:00:01.1: PME# disabled [ 0.269251] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.269269] pci 0000:00:02.0: supports D1 D2 [ 0.269271] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269273] pci 0000:00:02.0: PME# disabled [ 0.269289] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.269307] pci 0000:00:02.1: supports D1 D2 [ 0.269309] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269311] pci 0000:00:02.1: PME# disabled [ 0.269334] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.269358] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7] [ 0.269361] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3] [ 0.269364] pci 0000:00:05.0: reg 18 io port: [0x970-0x977] [ 0.269367] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73] [ 0.269370] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f] [ 0.269373] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.269400] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7] [ 0.269403] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3] [ 0.269406] pci 0000:00:05.1: reg 18 io port: [0x960-0x967] [ 0.269409] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63] [ 0.269412] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f] [ 0.269415] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.269442] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407] [ 0.269445] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003] [ 0.269448] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07] [ 0.269451] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803] [ 0.269454] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f] [ 0.269457] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.269508] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.269530] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.269532] pci 0000:00:06.1: PME# disabled [ 0.269560] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.269563] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007] [ 0.269567] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.269570] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f] [ 0.269589] pci 0000:00:08.0: supports D1 D2 [ 0.269590] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269594] pci 0000:00:08.0: PME# disabled [ 0.269619] pci 0000:00:09.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff] [ 0.269622] pci 0000:00:09.0: reg 14 io port: [0xac00-0xac07] [ 0.269625] pci 0000:00:09.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff] [ 0.269628] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f] [ 0.269647] pci 0000:00:09.0: supports D1 D2 [ 0.269649] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269652] pci 0000:00:09.0: PME# disabled [ 0.269688] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269690] pci 0000:00:0e.0: PME# disabled [ 0.269716] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269718] pci 0000:00:0f.0: PME# disabled [ 0.269812] pci 0000:01:07.0: reg 10 io port: [0x9c00-0x9c3f] [ 0.269837] pci 0000:01:07.0: supports D1 D2 [ 0.269858] pci 0000:01:08.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.269901] pci 0000:01:08.2: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.269948] pci 0000:01:0b.0: reg 10 32bit mmio: [0xfcfff000-0xfcfff7ff] [ 0.269952] pci 0000:01:0b.0: reg 14 32bit mmio: [0xfcff8000-0xfcffbfff] [ 0.269977] pci 0000:01:0b.0: supports D1 D2 [ 0.269978] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.269981] pci 0000:01:0b.0: PME# disabled [ 0.270001] pci 0000:00:06.0: transparent bridge [ 0.270004] pci 0000:00:06.0: bridge io port: [0x9000-0x9fff] [ 0.270006] pci 0000:00:06.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.270033] pci 0000:00:0e.0: bridge io port: [0x7000-0x8fff] [ 0.270035] pci 0000:00:0e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.270058] pci 0000:03:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff] [ 0.270065] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdde0000-0xfddeffff] [ 0.270069] pci 0000:03:00.0: reg 20 io port: [0x6c00-0x6cff] [ 0.270076] pci 0000:03:00.0: reg 30 32bit mmio: [0xfddc0000-0xfdddffff] [ 0.270090] pci 0000:03:00.0: supports D1 D2 [ 0.270114] pci 0000:03:00.1: reg 10 64bit mmio: [0xfddfc000-0xfddfffff] [ 0.270140] pci 0000:03:00.1: supports D1 D2 [ 0.272056] pci 0000:00:0f.0: bridge io port: [0x6000-0x6fff] [ 0.272058] pci 0000:00:0f.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.272061] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.272068] pci_bus 0000:00: on NUMA node 0 [ 0.272074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.272358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.333090] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333296] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 0.333503] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333709] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333914] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334126] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 0.334333] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) [ 0.334539] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334747] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334953] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.335168] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.335375] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) [ 0.335581] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.335787] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336001] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336203] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336410] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336617] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.336821] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 0.337034] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15) [ 0.337277] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.337520] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.337759] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.338007] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.338245] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.338479] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.338718] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.338945] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.339192] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.339432] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.339671] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.339911] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.340159] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.340398] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.340637] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.340876] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.341118] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.341357] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.341599] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.341840] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.342256] usbcore: registered new interface driver usbfs [ 0.342321] usbcore: registered new interface driver hub [ 0.342370] usbcore: registered new device driver usb [ 0.342499] PCI: Using ACPI for IRQ routing [ 0.346018] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.346021] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.352006] pnp: PnP ACPI init [ 0.352011] ACPI: bus type pnp registered [ 0.358206] pnp: PnP ACPI: found 13 devices [ 0.358208] ACPI: ACPI bus type pnp unregistered [ 0.358216] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.358218] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.358221] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.358223] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.358225] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.358228] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.358233] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.358235] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.358237] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.358244] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.358249] system 00:0c: iomem range 0xcf000-0xcffff has been reserved [ 0.358251] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.358253] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.358256] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.358258] system 00:0c: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.358261] system 00:0c: iomem range 0xdfee0000-0xdfefffff could not be reserved [ 0.358263] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.358265] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.358268] system 00:0c: iomem range 0x100000-0xdfedffff could not be reserved [ 0.358270] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.358273] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.358276] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.358278] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.358281] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.358283] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.393245] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.393248] pci 0000:00:06.0: IO window: 0x9000-0x9fff [ 0.393250] pci 0000:00:06.0: MEM window: 0xfa000000-0xfcffffff [ 0.393253] pci 0000:00:06.0: PREFETCH window: disabled [ 0.393255] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 0.393257] pci 0000:00:0e.0: IO window: 0x7000-0x8fff [ 0.393260] pci 0000:00:0e.0: MEM window: 0xfde00000-0xfdefffff [ 0.393262] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.393265] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03 [ 0.393267] pci 0000:00:0f.0: IO window: 0x6000-0x6fff [ 0.393269] pci 0000:00:0f.0: MEM window: 0xfdd00000-0xfddfffff [ 0.393272] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.393278] pci 0000:00:06.0: setting latency timer to 64 [ 0.393282] pci 0000:00:0e.0: setting latency timer to 64 [ 0.393286] pci 0000:00:0f.0: setting latency timer to 64 [ 0.393288] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.393290] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.393293] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.393295] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.393296] pci_bus 0000:01: resource 2 mem: [0x0-0x0] [ 0.393298] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.393300] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.393302] pci_bus 0000:02: resource 0 io: [0x7000-0x8fff] [ 0.393304] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.393306] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 0.393307] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.393309] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff] [ 0.393311] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.393313] pci_bus 0000:03: resource 2 mem: [0xe0000000-0xefffffff] [ 0.393314] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.393365] NET: Registered protocol family 2 [ 0.409079] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.409358] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.409819] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.410073] TCP: Hash tables configured (established 131072 bind 65536) [ 0.410075] TCP reno registered [ 0.415099] NET: Registered protocol family 1 [ 0.415221] checking if image is initramfs...<7>Switched to high resolution mode on CPU 2 [ 0.500751] Switched to high resolution mode on CPU 3 [ 0.500802] Switched to high resolution mode on CPU 1 [ 0.501039] Switched to high resolution mode on CPU 0 [ 0.518178] it is [ 0.627417] Freeing initrd memory: 3026k freed [ 0.628768] Scanning for low memory corruption every 60 seconds [ 0.628924] audit: initializing netlink socket (disabled) [ 0.628939] type=2000 audit(1233237483.628:1): initialized [ 0.629340] highmem bounce pool size: 64 pages [ 0.629344] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.629531] msgmni has been set to 1697 [ 0.629777] alg: No test for stdrng (krng) [ 0.629834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.629837] io scheduler noop registered [ 0.629857] io scheduler cfq registered (default) [ 0.642787] pci 0000:03:00.0: Boot video device [ 0.642906] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 0.643020] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 0.643259] fan PNP0C0B:00: registered as cooling_device0 [ 0.643262] ACPI: Fan [FAN] (on) [ 0.643749] processor ACPI_CPU:00: registered as cooling_device1 [ 0.643802] processor ACPI_CPU:01: registered as cooling_device2 [ 0.643852] processor ACPI_CPU:02: registered as cooling_device3 [ 0.643904] processor ACPI_CPU:03: registered as cooling_device4 [ 0.644400] ACPI Warning (nspredef-0940): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20081204] [ 0.644406] ACPI: Expecting a [Reference] package element, found type 0 [ 0.644436] ACPI: Invalid passive threshold [ 0.644665] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.645131] ACPI: Thermal Zone [THRM] (40 C) [ 0.647800] Real Time Clock Driver v1.12b [ 0.648015] Non-volatile memory driver v1.3 [ 0.648018] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.648128] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.648480] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.649974] brd: module loaded [ 0.650197] PNP: No PS/2 controller found. Probing ports directly. [ 0.650603] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.650608] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.650691] mice: PS/2 mouse device common for all mice [ 0.650842] cpuidle: using governor ladder [ 0.651623] usbcore: registered new interface driver hiddev [ 0.651655] usbcore: registered new interface driver usbhid [ 0.651657] usbhid: v2.6:USB HID core driver [ 0.651900] TCP cubic registered [ 0.651901] Initializing XFRM netlink socket [ 0.651914] NET: Registered protocol family 17 [ 0.651933] Using IPI Shortcut mode [ 0.652309] Freeing unused kernel memory: 336k freed [ 0.908633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.909040] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 0.909051] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 0.909076] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.909078] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.909185] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.909211] ehci_hcd 0000:00:02.1: debug port 1 [ 0.909214] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.909229] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 0.915016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.915036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.915038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915040] usb usb1: Product: EHCI Host Controller [ 0.915041] usb usb1: Manufacturer: Linux 2.6.29-rc3 ehci_hcd [ 0.915043] usb usb1: SerialNumber: 0000:00:02.1 [ 0.915100] usb usb1: configuration #1 chosen from 1 choice [ 0.915135] hub 1-0:1.0: USB hub found [ 0.915141] hub 1-0:1.0: 10 ports detected [ 0.917391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.917790] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.917800] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 0.917822] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.917824] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.917901] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.917924] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 0.970291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.970293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.970295] usb usb2: Product: OHCI Host Controller [ 0.970297] usb usb2: Manufacturer: Linux 2.6.29-rc3 ohci_hcd [ 0.970298] usb usb2: SerialNumber: 0000:00:02.0 [ 0.970357] usb usb2: configuration #1 chosen from 1 choice [ 0.970399] hub 2-0:1.0: USB hub found [ 0.970407] hub 2-0:1.0: 10 ports detected [ 0.972570] uhci_hcd: USB Universal Host Controller Interface driver [ 0.993209] SCSI subsystem initialized [ 0.996215] Driver 'sd' needs updating - please use bus_type methods [ 1.009197] libata version 3.00 loaded. [ 1.011423] pata_amd 0000:00:04.0: version 0.3.11 [ 1.011457] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.011513] scsi0 : pata_amd [ 1.011604] scsi1 : pata_amd [ 1.012368] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.012371] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.385343] ata1.00: ATA-7: MAXTOR STM3320620A, 3.AAE, max UDMA/100 [ 1.385345] ata1.00: 625142448 sectors, multi 1: LBA48 [ 1.385380] ata1.01: ATAPI: HP DVD Writer 1040d, EH24, max UDMA/66 [ 1.385405] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c50000) ACPI=0x3f01f (20:30:0x1f) [ 1.385409] ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc6c50000) ACPI=0x1f01f (20:30:0x1f) [ 1.460297] ata1.00: configured for UDMA/100 [ 1.473144] usb 1-10: new high speed USB device using ehci_hcd and address 5 [ 1.482579] ata1.01: configured for UDMA/66 [ 1.483344] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5 [ 1.483460] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1.483471] sd 0:0:0:0: [sda] Write Protect is off [ 1.483473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.483486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.483536] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1.483546] sd 0:0:0:0: [sda] Write Protect is off [ 1.483548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.483568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.483570] sda: sda1 sda2 sda3 [ 1.508481] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.509557] scsi 0:0:1:0: CD-ROM HP DVD Writer 1040d EH24 PQ: 0 ANSI: 5 [ 1.509684] ata2: port disabled. ignoring. [ 1.586884] usb 1-10: New USB device found, idVendor=0409, idProduct=0059 [ 1.586886] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.586944] usb 1-10: configuration #1 chosen from 1 choice [ 1.587043] hub 1-10:1.0: USB hub found [ 1.587131] hub 1-10:1.0: 4 ports detected [ 1.804393] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 1.954664] usb 2-2: New USB device found, idVendor=04b8, idProduct=0005 [ 1.954666] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.954668] usb 2-2: Product: USB Printer [ 1.954671] usb 2-2: Manufacturer: EPSON [ 1.954673] usb 2-2: SerialNumber: RL0200301161041200 [ 1.954731] usb 2-2: configuration #1 chosen from 1 choice [ 2.174391] usb 2-4: new low speed USB device using ohci_hcd and address 3 [ 2.319804] usb 2-4: New USB device found, idVendor=046d, idProduct=c517 [ 2.319806] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.319808] usb 2-4: Product: USB Receiver [ 2.319812] usb 2-4: Manufacturer: Logitech [ 2.319861] usb 2-4: configuration #1 chosen from 1 choice [ 2.330012] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input0 [ 2.335432] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-4/input0 [ 2.343813] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.344369] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input1 [ 2.355486] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4/input1 [ 2.572392] usb 2-5: new full speed USB device using ohci_hcd and address 4 [ 2.707956] usb 2-5: New USB device found, idVendor=0451, idProduct=2046 [ 2.707958] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.708016] usb 2-5: configuration #1 chosen from 1 choice [ 2.710989] hub 2-5:1.0: USB hub found [ 2.713957] hub 2-5:1.0: 4 ports detected [ 2.806111] usb 1-10.1: new low speed USB device using ehci_hcd and address 6 [ 3.011934] usb 1-10.1: New USB device found, idVendor=050d, idProduct=0751 [ 3.011937] usb 1-10.1: New USB device strings: Mfr=4, Product=20, SerialNumber=0 [ 3.011939] usb 1-10.1: Product: Belkin UPS [ 3.011940] usb 1-10.1: Manufacturer: Belkin [ 3.011990] usb 1-10.1: configuration #1 chosen from 1 choice [ 3.715643] generic-usb 0003:050D:0751.0003: hiddev97,hidraw2: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.1-10.1/input0 [ 3.792500] usb 1-10.2: new full speed USB device using ehci_hcd and address 7 [ 3.891527] usb 1-10.2: New USB device found, idVendor=0403, idProduct=6001 [ 3.891529] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.891531] usb 1-10.2: Product: USB FAST SERIAL ADAPTER [ 3.891532] usb 1-10.2: Manufacturer: FTDI [ 3.891534] usb 1-10.2: SerialNumber: FTOOS09N [ 3.891588] usb 1-10.2: configuration #1 chosen from 1 choice [ 3.968562] usb 1-10.3: new full speed USB device using ehci_hcd and address 8 [ 4.013902] sata_nv 0000:00:05.0: version 3.5 [ 4.014319] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 4.014329] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 4.014331] sata_nv 0000:00:05.0: Using SWNCQ mode [ 4.014631] sata_nv 0000:00:05.0: setting latency timer to 64 [ 4.014814] scsi2 : sata_nv [ 4.014982] scsi3 : sata_nv [ 4.015185] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21 [ 4.015187] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21 [ 4.056463] usb 1-10.3: New USB device found, idVendor=03eb, idProduct=3301 [ 4.056466] usb 1-10.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.056468] usb 1-10.3: Product: Standard USB Hub [ 4.056535] usb 1-10.3: configuration #1 chosen from 1 choice [ 4.057237] hub 1-10.3:1.0: USB hub found [ 4.057337] hub 1-10.3:1.0: 4 ports detected [ 4.131624] usb 1-10.4: new high speed USB device using ehci_hcd and address 9 [ 4.218900] usb 1-10.4: New USB device found, idVendor=0409, idProduct=0059 [ 4.218902] usb 1-10.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.218951] usb 1-10.4: configuration #1 chosen from 1 choice [ 4.219058] hub 1-10.4:1.0: USB hub found [ 4.219150] hub 1-10.4:1.0: 4 ports detected [ 4.492764] usb 1-10.4.4: new full speed USB device using ehci_hcd and address 10 [ 4.580914] usb 1-10.4.4: New USB device found, idVendor=04b8, idProduct=010f [ 4.580916] usb 1-10.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.580918] usb 1-10.4.4: Product: EPSON Scanner 010F [ 4.580922] usb 1-10.4.4: Manufacturer: EPSON [ 4.580972] usb 1-10.4.4: configuration #1 chosen from 1 choice [ 4.888293] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.891745] ata3.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 4.891748] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 4.897882] ata3.00: configured for UDMA/133 [ 4.897958] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 4.898065] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.898075] sd 2:0:0:0: [sdb] Write Protect is off [ 4.898077] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.898090] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.898146] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.898154] sd 2:0:0:0: [sdb] Write Protect is off [ 4.898156] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.898169] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.898176] sdb: sdb1 sdb2 sdb3 [ 4.902253] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.776289] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.779557] ata4.00: ATA-7: Hitachi HDT725040VLA360, V5COA7EA, max UDMA/133 [ 5.779559] ata4.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.785699] ata4.00: configured for UDMA/133 [ 5.785762] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5 [ 5.785871] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors: (400 GB/372 GiB) [ 5.785881] sd 3:0:0:0: [sdc] Write Protect is off [ 5.785884] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.785897] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.785938] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors: (400 GB/372 GiB) [ 5.785951] sd 3:0:0:0: [sdc] Write Protect is off [ 5.785953] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.785970] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.785977] sdc: sdc1 [ 5.800177] sd 3:0:0:0: [sdc] Attached SCSI disk [ 5.800653] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 5.800663] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 5.800666] sata_nv 0000:00:05.1: Using SWNCQ mode [ 5.800949] sata_nv 0000:00:05.1: setting latency timer to 64 [ 5.801049] scsi4 : sata_nv [ 5.801136] scsi5 : sata_nv [ 5.801352] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20 [ 5.801354] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20 [ 6.534602] ata5: SATA link down (SStatus 0 SControl 300) [ 7.267599] ata6: SATA link down (SStatus 0 SControl 300) [ 7.267976] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23 [ 7.267979] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23 [ 7.267981] sata_nv 0000:00:05.2: Using SWNCQ mode [ 7.268258] sata_nv 0000:00:05.2: setting latency timer to 64 [ 7.268325] scsi6 : sata_nv [ 7.268412] scsi7 : sata_nv [ 7.268600] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23 [ 7.268602] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23 [ 8.001600] ata7: SATA link down (SStatus 0 SControl 300) [ 8.734600] ata8: SATA link down (SStatus 0 SControl 300) [ 16.553155] kjournald starting. Commit interval 5 seconds [ 16.553163] EXT3-fs: mounted filesystem with ordered data mode. [ 16.848493] type=1404 audit(1233237499.848:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 16.988931] SELinux: 8192 avtab hash slots, 228199 rules. [ 17.027461] SELinux: 8192 avtab hash slots, 228199 rules. [ 17.055730] SELinux: 8 users, 12 roles, 2519 types, 116 bools, 1 sens, 1024 cats [ 17.055734] SELinux: 67 classes, 228199 rules [ 17.057544] SELinux: class peer not defined in policy [ 17.057546] SELinux: class capability2 not defined in policy [ 17.057548] SELinux: class kernel_service not defined in policy [ 17.057556] SELinux: permission open in class dir not defined in policy [ 17.057559] SELinux: permission open in class file not defined in policy [ 17.057562] SELinux: permission open in class chr_file not defined in policy [ 17.057564] SELinux: permission open in class blk_file not defined in policy [ 17.057566] SELinux: permission open in class fifo_file not defined in policy [ 17.057574] SELinux: permission recvfrom in class node not defined in policy [ 17.057576] SELinux: permission sendto in class node not defined in policy [ 17.057581] SELinux: permission ingress in class netif not defined in policy [ 17.057583] SELinux: permission egress in class netif not defined in policy [ 17.057618] SELinux: permission setfcap in class capability not defined in policy [ 17.057631] SELinux: permission forward_in in class packet not defined in policy [ 17.057633] SELinux: permission forward_out in class packet not defined in policy [ 17.057736] SELinux: the above unknown classes and permissions will be allowed [ 17.057739] SELinux: Completing initialization. [ 17.057740] SELinux: Setting up existing superblocks. [ 17.079797] SELinux: initialized (dev sdb3, type ext3), uses xattr [ 17.179519] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 17.179530] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 17.179617] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 17.179638] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 17.179646] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 17.179651] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 17.179659] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 17.179662] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 17.179669] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 17.179673] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 17.179678] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 17.179699] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 17.179706] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 17.179716] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 17.179720] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 17.179736] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 17.198294] type=1403 audit(1233237500.198:3): policy loaded auid=4294967295 ses=4294967295 [ 19.612241] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.612262] scsi 0:0:1:0: Attached scsi generic sg1 type 5 [ 19.612283] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 19.612304] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 19.615133] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 19.618493] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 19.637069] ACPI: Power Button (FF) [PWRF] [ 19.637127] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 19.647421] ACPI: Power Button (CM) [PWRB] [ 19.657024] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 19.657030] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45] [ 19.657033] ACPI: Device needs an ACPI driver [ 19.657044] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 19.661559] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 19.661579] usbcore: registered new interface driver usblp [ 19.717285] usbcore: registered new interface driver usbserial [ 19.717290] usbserial: USB Serial Driver core [ 19.722841] Driver 'sr' needs updating - please use bus_type methods [ 19.724161] Floppy drive(s): fd0 is 1.44M [ 19.727130] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62. [ 19.727651] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 19.727656] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 19.727660] forcedeth 0000:00:08.0: setting latency timer to 64 [ 19.727809] nv_probe: set workaround bit for reversed mac addr [ 19.730916] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 19.730921] Uniform CD-ROM driver Revision: 3.20 [ 19.731058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 19.731609] USB Serial support registered for FTDI USB Serial Device [ 19.731672] ftdi_sio 1-10.2:1.0: FTDI USB Serial Device converter detected [ 19.731701] usb 1-10.2: Detected FT232RL [ 19.731763] usb 1-10.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 19.731791] usbcore: registered new interface driver ftdi_sio [ 19.731793] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver [ 19.739000] FDC 0 is a post-1991 82077 [ 19.914729] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 19.914740] firewire_ohci 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 19.933388] Linux video capture interface: v2.00 [ 19.972143] firewire_ohci: Added fw-ohci device 0000:01:0b.0, OHCI version 1.10 [ 20.117893] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 20.118523] cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected], frontend(s): 1 [ 20.118525] cx88[0]: TV tuner type 60, Radio tuner type -1 [ 20.134243] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 20.239869] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1f:c6:62:fc:bb [ 20.239873] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 20.240309] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 20.240314] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 20.240367] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 20.255696] tuner' 2-0043: chip found @ 0x86 (cx88[0]) [ 20.268128] tda9887 2-0043: creating new instance [ 20.268131] tda9887 2-0043: tda988[5/6/7] found [ 20.271280] tuner' 2-0061: chip found @ 0xc2 (cx88[0]) [ 20.324983] tuner-simple 2-0061: creating new instance [ 20.324987] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC)) [ 20.327300] cx88[0]/2: cx2388x 8802 Driver Manager [ 20.327715] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 20.327725] cx88-mpeg driver manager 0000:01:08.2: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 20.327732] cx88[0]/2: found at 0000:01:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xfa000000 [ 20.327736] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 20.327790] cx8800 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 20.327799] cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 18, latency: 32, mmio: 0xfb000000 [ 20.327808] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 20.327869] cx88[0]/0: registered device video0 [v4l2] [ 20.327885] cx88[0]/0: registered device vbi0 [ 20.327903] cx88[0]/0: registered device radio0 [ 20.330282] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 20.330295] EMU10K1_Audigy 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 20.332520] Audigy2 value: Special config. [ 20.346268] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 20.346272] cx88/2: registering cx8802 driver, type: dvb access: shared [ 20.346276] cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22] [ 20.346278] cx88[0]/2: cx2388x based DVB/ATSC card [ 20.346287] BUG: unable to handle kernel NULL pointer dereference at (null) [ 20.346358] IP: [] __mutex_lock_slowpath+0x2d/0xa0 [ 20.346413] *pdpt = 000000003582c001 *pde = 0000000000000000 [ 20.346417] Oops: 0002 [#1] PREEMPT SMP [ 20.346502] last sysfs file: /sys/devices/pci0000:00/0000:00:06.0/0000:01:08.0/video4linux/vbi0/dev [ 20.346532] Modules linked in: cx88_dvb(+) videobuf_dvb dvb_core tuner_simple tuner_types tda9887 tda8290 tuner snd_emu10k1 snd_hda_intel(+) snd_seq_dummy snd_hda_codec cx8800 snd_seq_oss(+) cx8802 cx88xx snd_seq_midi_event snd_rawmidi snd_seq snd_ac97_codec ir_common snd_pcm_oss snd_mixer_oss ac97_bus v4l2_common snd_seq_device videodev i2c_algo_bit snd_pcm firewire_ohci snd_util_mem firewire_core tveeprom v4l1_compat snd_hwdep btcx_risc videobuf_dma_sg snd_timer videobuf_core crc_itu_t snd ftdi_sio forcedeth(+) floppy sr_mod usbserial snd_page_alloc i2c_nforce2 soundcore usblp cdrom button pcspkr sg i2c_core joydev evdev ahci pata_jmicron sata_nv pata_amd libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 20.347382] [ 20.347382] Pid: 1797, comm: modprobe Tainted: G W (2.6.29-rc3 #3) System Product Name [ 20.347382] EIP: 0060:[] EFLAGS: 00010246 CPU: 3 [ 20.347382] EIP is at __mutex_lock_slowpath+0x2d/0xa0 [ 20.347382] EAX: f5dc3e48 EBX: f5901904 ECX: f5901804 EDX: 00000000 [ 20.347382] ESI: f5901908 EDI: f590190c EBP: f5dc3e60 ESP: f5dc3e44 [ 20.347382] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 20.347382] Process modprobe (pid: 1797, ti=f5dc3000 task=f5c851f0 task.ti=f5dc3000) [ 20.347382] Stack: [ 20.347382] f5c851f0 f590190c f5dc3e7a c0684f05 f59018fc f5d62800 00000001 f5dc3e68 [ 20.347382] c061d59d f5dc3e80 f8435148 f5901904 ffffffed f5d62800 00000001 f5dc3ecc [ 20.347382] f8446457 f8449214 f5d62810 0005489c 00000000 14a3a42f 00000006 00000202 [ 20.347382] Call Trace: [ 20.347382] [] ? mutex_lock+0xd/0x10 [ 20.347382] [] ? videobuf_dvb_get_frontend+0x18/0x60 [videobuf_dvb] [ 20.347382] [] ? cx8802_dvb_probe+0xe7/0x1fc0 [cx88_dvb] [ 20.347382] [] ? cx8802_dvb_advise_release+0x0/0x70 [cx88_dvb] [ 20.347382] [] ? cx8802_register_driver+0x1a4/0x1f0 [cx8802] [ 20.347382] [] ? dvb_init+0x0/0x40 [cx88_dvb] [ 20.347382] [] ? dvb_init+0x34/0x40 [cx88_dvb] [ 20.347382] [] ? _stext+0x2a/0x150 [ 20.347382] [] ? sys_init_module+0x83/0x1b0 [ 20.347382] [] ? sys_read+0x3d/0x70 [ 20.347382] [] ? sysenter_do_call+0x12/0x21 [ 20.347382] Code: e5 57 56 53 89 c3 8d 73 04 83 ec 10 8d 7b 08 64 a1 00 a0 75 c0 89 45 e4 89 f0 e8 1f 10 00 00 8b 57 04 8d 45 e8 89 47 04 89 7d e8 <89> 02 8b 45 e4 89 55 ec ba ff ff ff ff 89 45 f0 89 d0 87 03 83 [ 20.347382] EIP: [] __mutex_lock_slowpath+0x2d/0xa0 SS:ESP 0068:f5dc3e44 [ 20.352096] ---[ end trace 4eaa2a86a8e2da24 ]--- [ 20.352149] note: modprobe[1797] exited with preempt_count 1 [ 20.471504] firewire_core: created device fw0: GUID 001e8c00012f990c, S400 [ 20.926787] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20 [ 20.926854] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20 [ 20.926941] forcedeth 0000:00:09.0: setting latency timer to 64 [ 20.927070] nv_probe: set workaround bit for reversed mac addr [ 20.927249] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 20.927325] HDA Intel 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 20.927461] HDA Intel 0000:03:00.1: setting latency timer to 64 [ 21.439857] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1f:c6:63:07:97 [ 21.439960] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 23.557884] EXT3 FS on sdb3, internal journal [ 23.841251] kjournald starting. Commit interval 5 seconds [ 23.841606] EXT3 FS on sdb1, internal journal [ 23.841691] EXT3-fs: mounted filesystem with ordered data mode. [ 23.849577] SELinux: initialized (dev sdb1, type ext3), uses xattr [ 23.859120] kjournald starting. Commit interval 5 seconds [ 23.859389] EXT3 FS on sdc1, internal journal [ 23.859471] EXT3-fs: mounted filesystem with ordered data mode. [ 23.866039] SELinux: initialized (dev sdc1, type ext3), uses xattr [ 23.866308] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 24.790477] Adding 4192956k swap on /dev/sdb2. Priority:-1 extents:1 across:4192956k [ 24.793212] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts