| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 2 Feb 2009 20:48:10 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Stephen Rothwell <sfr@...b.auug.org.au>,
linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [git pull] IDE fixes
Inside:
- ide-cd bug fix for non-bio backed requests from Borislav Petkov
(closes kernel.org bug #12320).
- icside bug fix to make it work again on PCB v6.
- Port initialization failure handling fix from Ian Campbell.
- Support for CS5536 PATA controller (based on older driver
from Martin K. Petersen, also extra thanks to Sergei Shtylyov
for excellent review of the new driver).
- Support for AmigaOne board for VIA IDE host driver
from Gerhard Pircher.
- dev->bus_id -> dev_name() conversion from Kay Sievers.
- tx4939ide update from Atsushi Nemoto.
Linus, please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/
to receive the following updates:
drivers/ide/Kconfig | 10 ++
drivers/ide/Makefile | 1 +
drivers/ide/cs5536.c | 308 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/ide/icside.c | 2 +-
drivers/ide/ide-acpi.c | 2 +-
drivers/ide/ide-cd.c | 3 +
drivers/ide/ide-io.c | 9 +-
drivers/ide/ide-probe.c | 43 +++++--
drivers/ide/tx4939ide.c | 4 +-
drivers/ide/via82cxxx.c | 5 +
10 files changed, 371 insertions(+), 16 deletions(-)
create mode 100644 drivers/ide/cs5536.c
Atsushi Nemoto (1):
tx4939ide: typo fix and minor cleanup
Bartlomiej Zolnierkiewicz (3):
ide: fix ide_register_port() failure handling
ide: add CS5536 host driver (v3)
icside: fix PCB version 6 support (v2)
Borislav Petkov (1):
ide-cd: fix DMA for non bio-backed requests
Gerhard Pircher (1):
ide: Force VIA IDE legacy interrupts for AmigaOne boards
Ian Campbell (1):
IDE: Unregister and disable devices if initialization fails.
Kay Sievers (1):
ide: struct device - replace bus_id with dev_name(), dev_set_name()
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b1c6f68..3dad229 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -465,6 +465,16 @@ config BLK_DEV_CS5535
It is safe to say Y to this question.
+config BLK_DEV_CS5536
+ tristate "CS5536 chipset support"
+ depends on X86_32
+ select BLK_DEV_IDEDMA_PCI
+ help
+ This option enables support for the AMD CS5536
+ companion chip used with the Geode LX processor family.
+
+ If unsure, say N.
+
config BLK_DEV_HPT366
tristate "HPT36X/37X chipset support"
select BLK_DEV_IDEDMA_PCI
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index c2b9c93..d0e3d7d 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o
+obj-$(CONFIG_BLK_DEV_CS5536) += cs5536.o
obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o
obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
new file mode 100644
index 0000000..7a62db7
--- /dev/null
+++ b/drivers/ide/cs5536.c
@@ -0,0 +1,308 @@
+/*
+ * CS5536 PATA support
+ * (C) 2007 Martin K. Petersen <mkp@....net>
+ * (C) 2009 Bartlomiej Zolnierkiewicz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Documentation:
+ * Available from AMD web site.
+ *
+ * The IDE timing registers for the CS5536 live in the Geode Machine
+ * Specific Register file and not PCI config space. Most BIOSes
+ * virtualize the PCI registers so the chip looks like a standard IDE
+ * controller. Unfortunately not all implementations get this right.
+ * In particular some have problems with unaligned accesses to the
+ * virtualized PCI registers. This driver always does full dword
+ * writes to work around the issue. Also, in case of a bad BIOS this
+ * driver can be loaded with the "msr=1" parameter which forces using
+ * the Machine Specific Registers to configure the device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <asm/msr.h>
+
+#define DRV_NAME "cs5536"
+
+enum {
+ MSR_IDE_CFG = 0x51300010,
+ PCI_IDE_CFG = 0x40,
+
+ CFG = 0,
+ DTC = 2,
+ CAST = 3,
+ ETC = 4,
+
+ IDE_CFG_CHANEN = (1 << 1),
+ IDE_CFG_CABLE = (1 << 17) | (1 << 16),
+
+ IDE_D0_SHIFT = 24,
+ IDE_D1_SHIFT = 16,
+ IDE_DRV_MASK = 0xff,
+
+ IDE_CAST_D0_SHIFT = 6,
+ IDE_CAST_D1_SHIFT = 4,
+ IDE_CAST_DRV_MASK = 0x3,
+
+ IDE_CAST_CMD_SHIFT = 24,
+ IDE_CAST_CMD_MASK = 0xff,
+
+ IDE_ETC_UDMA_MASK = 0xc0,
+};
+
+static int use_msr;
+
+static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+{
+ if (unlikely(use_msr)) {
+ u32 dummy;
+
+ rdmsr(MSR_IDE_CFG + reg, *val, dummy);
+ return 0;
+ }
+
+ return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static int cs5536_write(struct pci_dev *pdev, int reg, int val)
+{
+ if (unlikely(use_msr)) {
+ wrmsr(MSR_IDE_CFG + reg, val, 0);
+ return 0;
+ }
+
+ return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
+{
+ struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+ int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+ u32 dtc;
+
+ cs5536_read(pdev, DTC, &dtc);
+ dtc &= ~(IDE_DRV_MASK << dshift);
+ dtc |= tim << dshift;
+ cs5536_write(pdev, DTC, dtc);
+}
+
+/**
+ * cs5536_cable_detect - detect cable type
+ * @hwif: Port to detect on
+ *
+ * Perform cable detection for ATA66 capable cable.
+ *
+ * Returns a cable type.
+ */
+
+static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ u32 cfg;
+
+ cs5536_read(pdev, CFG, &cfg);
+
+ if (cfg & IDE_CFG_CABLE)
+ return ATA_CBL_PATA80;
+ else
+ return ATA_CBL_PATA40;
+}
+
+/**
+ * cs5536_set_pio_mode - PIO timing setup
+ * @drive: ATA device
+ * @pio: PIO mode number
+ */
+
+static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ static const u8 drv_timings[5] = {
+ 0x98, 0x55, 0x32, 0x21, 0x20,
+ };
+
+ static const u8 addr_timings[5] = {
+ 0x2, 0x1, 0x0, 0x0, 0x0,
+ };
+
+ static const u8 cmd_timings[5] = {
+ 0x99, 0x92, 0x90, 0x22, 0x20,
+ };
+
+ struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+ ide_drive_t *pair = ide_get_pair_dev(drive);
+ int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+ u32 cast;
+ u8 cmd_pio = pio;
+
+ if (pair)
+ cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
+
+ drive->drive_data &= (IDE_DRV_MASK << 8);
+ drive->drive_data |= drv_timings[pio];
+
+ cs5536_program_dtc(drive, drv_timings[pio]);
+
+ cs5536_read(pdev, CAST, &cast);
+
+ cast &= ~(IDE_CAST_DRV_MASK << cshift);
+ cast |= addr_timings[pio] << cshift;
+
+ cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
+ cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
+
+ cs5536_write(pdev, CAST, cast);
+}
+
+/**
+ * cs5536_set_dma_mode - DMA timing setup
+ * @drive: ATA device
+ * @mode: DMA mode
+ */
+
+static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+ static const u8 udma_timings[6] = {
+ 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
+ };
+
+ static const u8 mwdma_timings[3] = {
+ 0x67, 0x21, 0x20,
+ };
+
+ struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+ int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+ u32 etc;
+
+ cs5536_read(pdev, ETC, &etc);
+
+ if (mode >= XFER_UDMA_0) {
+ etc &= ~(IDE_DRV_MASK << dshift);
+ etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
+ } else { /* MWDMA */
+ etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+ drive->drive_data &= IDE_DRV_MASK;
+ drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+ }
+
+ cs5536_write(pdev, ETC, etc);
+}
+
+static void cs5536_dma_start(ide_drive_t *drive)
+{
+ if (drive->current_speed < XFER_UDMA_0 &&
+ (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+ cs5536_program_dtc(drive, drive->drive_data >> 8);
+
+ ide_dma_start(drive);
+}
+
+static int cs5536_dma_end(ide_drive_t *drive)
+{
+ int ret = ide_dma_end(drive);
+
+ if (drive->current_speed < XFER_UDMA_0 &&
+ (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+ cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+
+ return ret;
+}
+
+static const struct ide_port_ops cs5536_port_ops = {
+ .set_pio_mode = cs5536_set_pio_mode,
+ .set_dma_mode = cs5536_set_dma_mode,
+ .cable_detect = cs5536_cable_detect,
+};
+
+static const struct ide_dma_ops cs5536_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = cs5536_dma_start,
+ .dma_end = cs5536_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+};
+
+static const struct ide_port_info cs5536_info = {
+ .name = DRV_NAME,
+ .port_ops = &cs5536_port_ops,
+ .dma_ops = &cs5536_dma_ops,
+ .host_flags = IDE_HFLAG_SINGLE,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+};
+
+/**
+ * cs5536_init_one
+ * @dev: PCI device
+ * @id: Entry in match table
+ */
+
+static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ u32 cfg;
+
+ if (use_msr)
+ printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
+
+ cs5536_read(dev, CFG, &cfg);
+
+ if ((cfg & IDE_CFG_CHANEN) == 0) {
+ printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
+ return -ENODEV;
+ }
+
+ return ide_pci_init_one(dev, &cs5536_info, NULL);
+}
+
+static const struct pci_device_id cs5536_pci_tbl[] = {
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
+ { },
+};
+
+static struct pci_driver cs5536_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cs5536_pci_tbl,
+ .probe = cs5536_init_one,
+ .remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init cs5536_init(void)
+{
+ return pci_register_driver(&cs5536_pci_driver);
+}
+
+static void __exit cs5536_exit(void)
+{
+ pci_unregister_driver(&cs5536_pci_driver);
+}
+
+MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
+
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+
+module_init(cs5536_init);
+module_exit(cs5536_exit);
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 97a35c6..415d7e2 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -534,7 +534,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
d.dma_ops = NULL;
}
- ret = ide_host_register(host, NULL, hws);
+ ret = ide_host_register(host, &d, hws);
if (ret)
goto err_free;
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index d8f295b..ec7d07f 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -282,7 +282,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
port = hwif->channel ? drive->dn - 2: drive->dn;
DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
- hwif->name, dev->bus_id, port, hwif->channel);
+ hwif->name, dev_name(dev), port, hwif->channel);
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
DEBPRINT("%s drive %d:%d not present\n",
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index cae6937..0bfeb0c 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -787,6 +787,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (blk_fs_request(rq)) {
ide_end_request(drive, 1, rq->nr_sectors);
return ide_stopped;
+ } else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) {
+ ide_end_request(drive, 1, 1);
+ return ide_stopped;
}
goto end_request;
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index cc16331..9ee51ad 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -418,11 +418,14 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
- if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
- hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
- } else {
+ if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
hwif->sg_nents = 1;
+ } else if (!rq->bio) {
+ sg_init_one(sg, rq->data, rq->data_len);
+ hwif->sg_nents = 1;
+ } else {
+ hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
}
}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0db1ed9..ce0818a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1467,6 +1467,30 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
}
EXPORT_SYMBOL_GPL(ide_host_alloc);
+static void ide_port_free(ide_hwif_t *hwif)
+{
+ ide_port_free_devices(hwif);
+ ide_free_port_slot(hwif->index);
+ kfree(hwif);
+}
+
+static void ide_disable_port(ide_hwif_t *hwif)
+{
+ struct ide_host *host = hwif->host;
+ int i;
+
+ printk(KERN_INFO "%s: disabling port\n", hwif->name);
+
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
+ if (host->ports[i] == hwif) {
+ host->ports[i] = NULL;
+ host->n_ports--;
+ }
+ }
+
+ ide_port_free(hwif);
+}
+
int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
hw_regs_t **hws)
{
@@ -1507,8 +1531,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
hwif->present = 1;
if (hwif->chipset != ide_4drives || !hwif->mate ||
- !hwif->mate->present)
- ide_register_port(hwif);
+ !hwif->mate->present) {
+ if (ide_register_port(hwif)) {
+ ide_disable_port(hwif);
+ continue;
+ }
+ }
if (hwif->present)
ide_port_tune_devices(hwif);
@@ -1521,7 +1549,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
if (hwif_init(hwif) == 0) {
printk(KERN_INFO "%s: failed to initialize IDE "
"interface\n", hwif->name);
- hwif->present = 0;
+ device_unregister(&hwif->gendev);
+ ide_disable_port(hwif);
continue;
}
@@ -1660,12 +1689,8 @@ void ide_host_free(struct ide_host *host)
int i;
ide_host_for_each_port(i, hwif, host) {
- if (hwif == NULL)
- continue;
-
- ide_port_free_devices(hwif);
- ide_free_port_slot(hwif->index);
- kfree(hwif);
+ if (hwif)
+ ide_port_free(hwif);
}
kfree(host);
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 882f6f0..40b0812 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -261,9 +261,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
bcount = cur_len;
/*
* This workaround for zero count seems required.
- * (standard ide_build_dmatable do it too)
+ * (standard ide_build_dmatable does it too)
*/
- if ((bcount & 0xffff) == 0x0000)
+ if (bcount == 0x10000)
bcount = 0x8000;
*table++ = bcount & 0xffff;
*table++ = cur_addr;
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 703c3ee..6092fe3 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -448,6 +448,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
#endif
+#ifdef CONFIG_AMIGAONE
+ if (machine_is(amigaone))
+ d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
d.udma_mask = via_config->udma_mask;
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists