| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 02 Feb 2009 22:37:54 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/14] ide: use ata_tf_protocols enums
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] ide: use ata_tf_protocols enums
* Add IDE_TFLAG_MULTI_PIO taskfile flag and set it for commands
using multi-PIO protocol.
* Use ata_tf_protocols enums instead of TASKFILE_* defines to
denote command's protocol and then rename ->data_phase field
to ->protocol.
* Remove no longer needed <linux/hdreg.h> includes.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ide/ide-disk.c | 34 ++++++------------
drivers/ide/ide-disk_proc.c | 5 +-
drivers/ide/ide-io.c | 11 +----
drivers/ide/ide-ioctls.c | 2 -
drivers/ide/ide-park.c | 4 +-
drivers/ide/ide-pm.c | 5 +-
drivers/ide/ide-taskfile.c | 83 ++++++++++++++++++--------------------------
include/linux/ide.h | 3 +
8 files changed, 58 insertions(+), 89 deletions(-)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -28,7 +28,6 @@
#include <linux/mutex.h>
#include <linux/leds.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -53,15 +52,6 @@ static const u8 ide_rw_cmds[] = {
ATA_CMD_WRITE_EXT,
};
-static const u8 ide_data_phases[] = {
- TASKFILE_MULTI_IN,
- TASKFILE_MULTI_OUT,
- TASKFILE_IN,
- TASKFILE_OUT,
- TASKFILE_IN_DMA,
- TASKFILE_OUT_DMA,
-};
-
static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
{
u8 index, lba48, write;
@@ -69,17 +59,19 @@ static void ide_tf_set_cmd(ide_drive_t *
lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
- if (dma)
+ if (dma) {
+ cmd->protocol = ATA_PROT_DMA;
index = 8;
- else
- index = drive->mult_count ? 0 : 4;
+ } else {
+ cmd->protocol = ATA_PROT_PIO;
+ if (drive->mult_count) {
+ cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
+ index = 0;
+ } else
+ index = 4;
+ }
cmd->tf.command = ide_rw_cmds[index + lba48 + write];
-
- if (dma)
- index = 8; /* fixup index */
-
- cmd->data_phase = ide_data_phases[index / 2 + write];
}
/*
@@ -401,9 +393,9 @@ static void idedisk_prepare_flush(struct
cmd->tf.command = ATA_CMD_FLUSH_EXT;
else
cmd->tf.command = ATA_CMD_FLUSH;
- cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
- IDE_TFLAG_DYN;
- cmd->data_phase = TASKFILE_NO_DATA;
+ cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
+ IDE_TFLAG_DYN;
+ cmd->protocol = ATA_PROT_NODATA;
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->cmd_flags |= REQ_SOFTBARRIER;
Index: b/drivers/ide/ide-disk_proc.c
===================================================================
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -1,6 +1,5 @@
#include <linux/kernel.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include "ide-disk.h"
@@ -30,8 +29,8 @@ static int get_smart_data(ide_drive_t *d
tf->lbam = ATA_SMART_LBAM_PASS;
tf->lbah = ATA_SMART_LBAH_PASS;
tf->command = ATA_CMD_SMART;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- cmd.data_phase = TASKFILE_IN;
+ cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.protocol = ATA_PROT_PIO;
return ide_raw_taskfile(drive, &cmd, buf, 1);
}
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -40,7 +40,6 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include <linux/completion.h>
#include <linux/reboot.h>
#include <linux/cdrom.h>
@@ -216,7 +215,7 @@ static ide_startstop_t ide_disk_special(
struct ide_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
- cmd.data_phase = TASKFILE_NO_DATA;
+ cmd.protocol = ATA_PROT_NODATA;
if (s->b.set_geometry) {
s->b.set_geometry = 0;
@@ -310,15 +309,9 @@ static ide_startstop_t execute_drive_cmd
struct ide_cmd *cmd = rq->special;
if (cmd) {
- switch (cmd->data_phase) {
- case TASKFILE_MULTI_OUT:
- case TASKFILE_OUT:
- case TASKFILE_MULTI_IN:
- case TASKFILE_IN:
+ if (cmd->protocol == ATA_PROT_PIO) {
ide_init_sg_cmd(cmd, rq->nr_sectors);
ide_map_sg(drive, rq);
- default:
- break;
}
return do_rw_taskfile(drive, cmd);
Index: b/drivers/ide/ide-ioctls.c
===================================================================
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -148,7 +148,7 @@ static int ide_cmd_ioctl(ide_drive_t *dr
IDE_TFLAG_IN_NSECT;
}
tf->command = args[0];
- cmd.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA;
+ cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA;
if (args[3]) {
cmd.tf_flags |= IDE_TFLAG_IO_16BIT;
Index: b/drivers/ide/ide-park.c
===================================================================
--- a/drivers/ide/ide-park.c
+++ b/drivers/ide/ide-park.c
@@ -1,6 +1,5 @@
#include <linux/kernel.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
#include <linux/jiffies.h>
#include <linux/blkdev.h>
@@ -80,8 +79,9 @@ ide_startstop_t ide_do_park_unpark(ide_d
tf->command = ATA_CMD_CHK_POWER;
cmd.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.protocol = ATA_PROT_NODATA;
+
cmd.rq = rq;
- cmd.data_phase = TASKFILE_NO_DATA;
return do_rw_taskfile(drive, &cmd);
}
Index: b/drivers/ide/ide-pm.c
===================================================================
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -1,6 +1,5 @@
#include <linux/kernel.h>
#include <linux/ide.h>
-#include <linux/hdreg.h>
int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
@@ -164,8 +163,8 @@ ide_startstop_t ide_start_power_step(ide
return ide_stopped;
out_do_tf:
- cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- cmd->data_phase = TASKFILE_NO_DATA;
+ cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd->protocol = ATA_PROT_NODATA;
return do_rw_taskfile(drive, cmd);
}
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -47,8 +47,8 @@ int taskfile_lib_get_identify (ide_drive
cmd.tf.command = ATA_CMD_ID_ATA;
else
cmd.tf.command = ATA_CMD_ID_ATAPI;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- cmd.data_phase = TASKFILE_IN;
+ cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.protocol = ATA_PROT_PIO;
return ide_raw_taskfile(drive, &cmd, buf, 1);
}
@@ -66,13 +66,11 @@ ide_startstop_t do_rw_taskfile(ide_drive
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
const struct ide_dma_ops *dma_ops = hwif->dma_ops;
- if (orig_cmd->data_phase == TASKFILE_MULTI_IN ||
- orig_cmd->data_phase == TASKFILE_MULTI_OUT) {
- if (!drive->mult_count) {
- printk(KERN_ERR "%s: multimode not set!\n",
- drive->name);
- return ide_stopped;
- }
+ if (orig_cmd->protocol == ATA_PROT_PIO &&
+ (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) &&
+ drive->mult_count == 0) {
+ printk(KERN_ERR "%s: multimode not set!\n", drive->name);
+ return ide_stopped;
}
if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
@@ -87,17 +85,16 @@ ide_startstop_t do_rw_taskfile(ide_drive
tp_ops->tf_load(drive, cmd);
}
- switch (cmd->data_phase) {
- case TASKFILE_MULTI_OUT:
- case TASKFILE_OUT:
- tp_ops->exec_command(hwif, tf->command);
- ndelay(400); /* FIXME */
- return pre_task_out_intr(drive, cmd);
- case TASKFILE_MULTI_IN:
- case TASKFILE_IN:
+ switch (cmd->protocol) {
+ case ATA_PROT_PIO:
+ if (cmd->tf_flags & IDE_TFLAG_WRITE) {
+ tp_ops->exec_command(hwif, tf->command);
+ ndelay(400); /* FIXME */
+ return pre_task_out_intr(drive, cmd);
+ }
handler = task_in_intr;
/* fall-through */
- case TASKFILE_NO_DATA:
+ case ATA_PROT_NODATA:
if (handler == NULL)
handler = task_no_data_intr;
ide_execute_command(drive, tf->command, handler,
@@ -115,9 +112,6 @@ ide_startstop_t do_rw_taskfile(ide_drive
}
EXPORT_SYMBOL_GPL(do_rw_taskfile);
-/*
- * Handler for commands without a data phase
- */
static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
@@ -274,15 +268,10 @@ static void ide_pio_datablock(ide_drive_
touch_softlockup_watchdog();
- switch (cmd->data_phase) {
- case TASKFILE_MULTI_IN:
- case TASKFILE_MULTI_OUT:
+ if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO)
ide_pio_multi(drive, cmd, write);
- break;
- default:
+ else
ide_pio_sector(drive, cmd, write);
- break;
- }
drive->io_32bit = saved_io_32bit;
}
@@ -293,22 +282,12 @@ static ide_startstop_t task_error(ide_dr
if (cmd->tf_flags & IDE_TFLAG_FS) {
int sectors = cmd->nsect - cmd->nleft;
- switch (cmd->data_phase) {
- case TASKFILE_IN:
- if (cmd->nleft)
- break;
- /* fall through */
- case TASKFILE_OUT:
- sectors--;
- break;
- case TASKFILE_MULTI_IN:
- if (cmd->nleft)
- break;
- /* fall through */
- case TASKFILE_MULTI_OUT:
- sectors -= drive->mult_count;
- default:
- break;
+ if (cmd->protocol == ATA_PROT_PIO &&
+ ((cmd->tf_flags & IDE_TFLAG_WRITE) || cmd->nleft == 0)) {
+ if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO)
+ sectors -= drive->mult_count;
+ else
+ sectors--;
}
if (sectors > 0)
@@ -421,7 +400,7 @@ static ide_startstop_t pre_task_out_intr
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
drive->name,
- cmd->data_phase == TASKFILE_MULTI_OUT ? "MULT" : "",
+ (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "",
(drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
return startstop;
}
@@ -470,7 +449,7 @@ EXPORT_SYMBOL(ide_raw_taskfile);
int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd)
{
- cmd->data_phase = TASKFILE_NO_DATA;
+ cmd->protocol = ATA_PROT_NODATA;
return ide_raw_taskfile(drive, cmd, NULL, 0);
}
@@ -541,7 +520,6 @@ int ide_taskfile_ioctl(ide_drive_t *driv
memcpy(&cmd.tf_array[6], req_task->io_ports,
HDIO_DRIVE_TASK_HDR_SIZE);
- cmd.data_phase = req_task->data_phase;
cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE |
IDE_TFLAG_IN_TF;
@@ -586,10 +564,12 @@ int ide_taskfile_ioctl(ide_drive_t *driv
/* fixup data phase if needed */
if (req_task->data_phase == TASKFILE_IN_DMAQ ||
req_task->data_phase == TASKFILE_IN_DMA)
- cmd.data_phase = TASKFILE_OUT_DMA;
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
}
- switch (cmd.data_phase) {
+ cmd.protocol = ATA_PROT_DMA;
+
+ switch (req_task->data_phase) {
case TASKFILE_MULTI_OUT:
if (!drive->mult_count) {
/* (hs): give up if multcount is not set */
@@ -599,8 +579,10 @@ int ide_taskfile_ioctl(ide_drive_t *driv
err = -EPERM;
goto abort;
}
+ cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
/* fall through */
case TASKFILE_OUT:
+ cmd.protocol = ATA_PROT_PIO;
/* fall through */
case TASKFILE_OUT_DMAQ:
case TASKFILE_OUT_DMA:
@@ -617,8 +599,10 @@ int ide_taskfile_ioctl(ide_drive_t *driv
err = -EPERM;
goto abort;
}
+ cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
/* fall through */
case TASKFILE_IN:
+ cmd.protocol = ATA_PROT_PIO;
/* fall through */
case TASKFILE_IN_DMAQ:
case TASKFILE_IN_DMA:
@@ -626,6 +610,7 @@ int ide_taskfile_ioctl(ide_drive_t *driv
data_buf = inbuf;
break;
case TASKFILE_NO_DATA:
+ cmd.protocol = ATA_PROT_NODATA;
break;
default:
err = -EFAULT;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -298,6 +298,7 @@ enum {
/* struct ide_cmd was allocated using kmalloc() */
IDE_TFLAG_DYN = (1 << 27),
IDE_TFLAG_FS = (1 << 28),
+ IDE_TFLAG_MULTI_PIO = (1 << 29),
};
enum {
@@ -343,7 +344,7 @@ struct ide_cmd {
};
u8 ftf_flags; /* for TASKFILE ioctl */
u32 tf_flags;
- int data_phase;
+ int protocol;
int sg_nents; /* number of sg entries */
int sg_dma_direction; /* DMA transfer direction */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists