Initializing cgroup subsys cpuset Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Jul 21 10:36:02 UTC 2008 Command line: auto BOOT_IMAGE=Linux ro root=802 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000093800 (usable) BIOS-e820: 0000000000093800 - 0000000000094c00 (reserved) BIOS-e820: 00000000000eadc0 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable) BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (ACPI data) BIOS-e820: 00000000dfffe000 - 00000000e0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000820000000 (usable) Entering add_active_range(0, 0, 147) 0 entries of 3200 used Entering add_active_range(0, 256, 917488) 1 entries of 3200 used Entering add_active_range(0, 1048576, 8519680) 2 entries of 3200 used end_pfn_map = 8519680 DMI present. ACPI: RSDP 000F9440, 0014 (r0 ACPIAM) ACPI: RSDT DFFF0000, 0034 (r1 A M I OEMRSDT 6000714 MSFT 97) ACPI: FACP DFFF0200, 0084 (r2 A M I OEMFACP 6000714 MSFT 97) ACPI: DSDT DFFF0440, 5218 (r1 WTF4V WTF4V034 34 INTL 2002026) ACPI: FACS DFFFE000, 0040 ACPI: APIC DFFF0390, 00B0 (r1 A M I OEMAPIC 6000714 MSFT 97) ACPI: OEMB DFFFE040, 0063 (r1 A M I AMI_OEM 6000714 MSFT 97) ACPI: SRAT DFFF5660, 01A0 (r1 AMD HAMMER 1 AMD 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: PXM 2 -> APIC 4 -> Node 2 SRAT: PXM 2 -> APIC 5 -> Node 2 SRAT: PXM 3 -> APIC 6 -> Node 3 SRAT: PXM 3 -> APIC 7 -> Node 3 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 147) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-e0000000 Entering add_active_range(0, 0, 147) 1 entries of 3200 used Entering add_active_range(0, 256, 917488) 1 entries of 3200 used SRAT: Node 0 PXM 0 0-220000000 Entering add_active_range(0, 0, 147) 2 entries of 3200 used Entering add_active_range(0, 256, 917488) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2228224) 2 entries of 3200 used SRAT: Node 1 PXM 1 220000000-420000000 Entering add_active_range(1, 2228224, 4325376) 3 entries of 3200 used SRAT: Node 2 PXM 2 420000000-620000000 Entering add_active_range(2, 4325376, 6422528) 4 entries of 3200 used SRAT: Node 3 PXM 3 620000000-820000000 Entering add_active_range(3, 6422528, 8519680) 5 entries of 3200 used NUMA: Allocated memnodemap from 2a000 - 2a0c1 NUMA: Using 29 for the hash shift. Bootmem setup node 0 0000000000000000-0000000220000000 Bootmem setup node 1 0000000220000000-0000000420000000 Bootmem setup node 2 0000000420000000-0000000620000000 Bootmem setup node 3 0000000620000000-0000000820000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 8519680 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0 -> 147 0: 256 -> 917488 0: 1048576 -> 2228224 1: 2228224 -> 4325376 2: 4325376 -> 6422528 3: 6422528 -> 8519680 On node 0 totalpages: 2097027 DMA zone: 56 pages used for memmap DMA zone: 2460 pages reserved DMA zone: 1471 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 899112 pages, LIFO batch:31 Normal zone: 16128 pages used for memmap Normal zone: 1163520 pages, LIFO batch:31 Movable zone: 0 pages used for memmap On node 1 totalpages: 2097152 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 28672 pages used for memmap Normal zone: 2068480 pages, LIFO batch:31 Movable zone: 0 pages used for memmap On node 2 totalpages: 2097152 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 28672 pages used for memmap Normal zone: 2068480 pages, LIFO batch:31 Movable zone: 0 pages used for memmap On node 3 totalpages: 2097152 DMA zone: 0 pages used for memmap DMA32 zone: 0 pages used for memmap Normal zone: 28672 pages used for memmap Normal zone: 2068480 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) Processor #4 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Processor #5 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Processor #7 ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfebfc000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfebfc000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfebfe000] gsi_base[72]) IOAPIC[2]: apic_id 10, address 0xfebfe000, GSI 72-78 ACPI: IOAPIC (id[0x0b] address[0xfebff000] gsi_base[79]) IOAPIC[3]: apic_id 11, address 0xfebff000, GSI 79-85 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 0000000000093000 - 0000000000094000 swsusp: Registered nosave memory region: 0000000000094000 - 00000000000eb000 swsusp: Registered nosave memory region: 00000000000eb000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfffe000 swsusp: Registered nosave memory region: 00000000dfffe000 - 00000000e0000000 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000 swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff700000 swsusp: Registered nosave memory region: 00000000ff700000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) SMP: Allowing 8 CPUs, 0 hotplug CPUs PERCPU: Allocating 34400 bytes of per cpu data Built 4 zonelists in Zone order, mobility grouping on. Total pages: 8269543 Policy zone: Normal Kernel command line: auto BOOT_IMAGE=Linux ro root=802 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2814.427 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ f4000000 size 64 MB CPU 1: aperture @ f4000000 size 64 MB CPU 2: aperture @ f4000000 size 64 MB CPU 3: aperture @ f4000000 size 64 MB Memory: 33077220k/34078720k available (2146k kernel code, 476712k reserved, 1004k data, 316k init) Calibrating delay using timer specific routine.. 5632.28 BogoMIPS (lpj=11264579) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12564415 Detected 12.564 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/8 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5628.88 BogoMIPS (lpj=11257778) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 2/8 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 5628.92 BogoMIPS (lpj=11257846) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2/2 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 3/8 APIC 0x3 Initializing CPU#3 Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257835) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3/3 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 4/8 APIC 0x4 Initializing CPU#4 Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257822) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 4/4 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 5/8 APIC 0x5 Initializing CPU#5 Calibrating delay using timer specific routine.. 5628.90 BogoMIPS (lpj=11257816) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 5/5 -> Node 2 CPU: Physical Processor ID: 2 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 6/8 APIC 0x6 Initializing CPU#6 Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257827) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 6/6 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 SMP alternatives: switching to SMP code Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 5628.91 BogoMIPS (lpj=11257838) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 7/7 -> Node 3 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 Brought up 8 CPUs net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Root Bridge [PCIB] (0000:80) ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.POGB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *7 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *10 ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled. ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled. ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled. ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled. ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EE, should be EB [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0f12 PNP0f13 (active) pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:0e: Plug and Play ACPI device, IDs PNP0a03 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ f4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered system 00:07: ioport range 0x190-0x193 has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: iomem range 0xffb80000-0xfffffffe could not be reserved system 00:07: iomem range 0xdfefc000-0xdfefcfff could not be reserved system 00:07: iomem range 0xdfefd000-0xdfefd3ff could not be reserved system 00:07: iomem range 0xdfefe000-0xdfefe3ff could not be reserved system 00:07: iomem range 0xdfeff000-0xdfefffff could not be reserved system 00:07: iomem range 0xfefff000-0xfeffffff has been reserved system 00:07: driver attached system 00:08: ioport range 0xca2-0xca3 has been reserved system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:08: iomem range 0xfe200000-0xfebfffff could not be reserved system 00:08: iomem range 0xfd500000-0xfd5fffff has been reserved system 00:08: driver attached system 00:0b: ioport range 0xa00-0xa0f has been reserved system 00:0b: driver attached system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: driver attached system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xdffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved system 00:0d: iomem range 0x0-0x0 could not be reserved system 00:0d: driver attached PCI: Bridge: 0000:00:09.0 IO window: 9000-9fff MEM window: fd800000-fe0fffff PREFETCH window: fb400000-fd3fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: fd700000-fd7fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: fd600000-fd6fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Bridge: 0000:80:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:80:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:80:10.0 IO window: d000-dfff MEM window: fe200000-feafffff PREFETCH window: disabled. PCI: Bridge: 0000:80:11.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:80:0d.0 to 64 PCI: Setting latency timer of device 0000:80:0e.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 6 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 7 IP route cache hash table entries: 1048576 (order: 11, 8388608 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5446k freed audit: initializing netlink socket (disabled) audit(1234913487.632:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:80:0d.0 PCI: Found enabled HT MSI Mapping on 0000:80:00.0 PCI: Found disabled HT MSI Mapping on 0000:80:0e.0 PCI: Found enabled HT MSI Mapping on 0000:80:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:80:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:80:0d.0:pcie00] PCI: Setting latency timer of device 0000:80:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:80:0e.0:pcie00] Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:05: driver attached 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial 00:06: driver attached RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize input: Macintosh mouse button emulation as /class/input/input0 pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:09: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:0a: driver attached PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 316k freed input: AT Translated Set 2 keyboard as /class/input/input1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe1fc000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered SCSI subsystem initialized Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SAS Host driver 3.04.06 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xa2) at PCI slot 0000:00:06.0 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0x0d00-0x0d07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x0d08-0x0d0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hdb: TSSTcorpCD-ROM TS-L162C, ATAPI CD/DVD-ROM drive hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... tg3.c:v3.86 (November 9, 2007) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:d0:68:12:f6:fd eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:d0:68:12:f6:fc eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe1fdc00 libata version 3.00 loaded. ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 20 ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 20 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 22 ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 22 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 47 ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 47 (level, low) -> IRQ 47 sata_nv 0000:80:08.0: Using ADMA mode ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [LNKC] -> <7>PCI: Setting latency timer of device 0000:80:08.0 to 64 GSI 17 (level, low) -> IRQ 17 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 47 ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 47 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fe0ff800-fe0fffff] Max Packet=[2048] IR/IT contexts=[4/8] ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:82:03.0[A] -> GSI 75 (level, low) -> IRQ 75 mptbase: ioc0: Initiating bringup hdb: ATAPI 24X CD-ROM drive, 96kB Cache Uniform CD-ROM driver Revision: 3.20 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000000002244e] ioc0: LSISAS1068 B1: Capabilities={Initiator} scsi6 : ioc0: LSISAS1068 B1, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=75 scsi 6:0:0:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5 scsi 6:0:1:0: Direct-Access SEAGATE ST3146855SS RS02 PQ: 0 ANSI: 5 scsi 6:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2 Driver 'sd' needs updating - please use bus_type methods sd 6:1:0:0: [sda] 285155328 512-byte hardware sectors (146000 MB) sd 6:1:0:0: [sda] Write Protect is off sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08 sd 6:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:1:0:0: [sda] 285155328 512-byte hardware sectors (146000 MB) sd 6:1:0:0: [sda] Write Protect is off sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08 sd 6:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 6:1:0:0: [sda] Attached SCSI disk Probing IDE interface ide1... md: linear personality registered for level -1 md: multipath personality registered for level -4 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 xor: automatically using best checksumming function: generic_sse generic_sse: 8660.000 MB/sec xor: using function: generic_sse (8660.000 MB/sec) async_tx: api initialized (sync-only) raid6: int64x1 2538 MB/s raid6: int64x2 3089 MB/s raid6: int64x4 3283 MB/s raid6: int64x8 2294 MB/s raid6: sse2x1 3553 MB/s raid6: sse2x2 5050 MB/s raid6: sse2x4 5181 MB/s raid6: using algorithm sse2x4 (5181 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 Attempting manual resume SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 input: Power Button (FF) as /class/input/input2 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2300 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2340 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 input: PC Speaker as /class/input/input4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: Power Button (CM) [PWRB] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k loop: module loaded device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com XFS mounting filesystem sda4 Ending clean XFS mount for filesystem: sda4 NET: Registered protocol family 10 lo: Disabled Privacy Extensions