[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.28.7 (root@champagne) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Thu Feb 26 18:28:06 CET 2009 [ 0.000000] Command line: root=UUID=0a96113a-5259-480a-abac-a27a7f9ae544 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved) [ 0.000000] BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bffb0000 page 4k [ 0.000000] kernel direct mapping tables up to bffb0000 @ 8000-d000 [ 0.000000] last_map_addr: bffb0000 end: bffb0000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ b000-11000 [ 0.000000] last_map_addr: 13c000000 end: 13c000000 [ 0.000000] RAMDISK: 37a0a000 - 37fef411 [ 0.000000] ACPI: RSDP 000F7D10, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT BFFC81CC, 0084 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP BFFC8084, 00F4 (r4 HP 30C5 3 HP 1) [ 0.000000] ACPI: DSDT BFFC8544, 12EAD (r1 HP 8510x 10000 MSFT 3000001) [ 0.000000] ACPI: FACS BFFE7D80, 0040 [ 0.000000] ACPI: SLIC BFFC8250, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET BFFC83C8, 0038 (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: APIC BFFC8400, 0068 (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: MCFG BFFC8468, 003C (r1 HP 30C5 1 HP 1) [ 0.000000] ACPI: TCPA BFFC84A4, 0032 (r2 HP 30C5 1 HP 1) [ 0.000000] ACPI: ASF! BFFC84D8, 0069 (r16 HP CHIMAYU 1 HP 0) [ 0.000000] ACPI: SSDT BFFDB3F1, 0328 (r1 HP HPQSAT 1 MSFT 3000001) [ 0.000000] ACPI: SSDT BFFDB719, 017C (r1 HP HPQMRM 1 MSFT 3000001) [ 0.000000] ACPI: SSDT BFFDC29D, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT BFFDC4FC, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT BFFDC5A2, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 013c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00005d0248] TEXT DATA BSS ==> [0000200000 - 00005d0248] [ 0.000000] #3 [0037a0a000 - 0037fef411] RAMDISK ==> [0037a0a000 - 0037fef411] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffb0 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1032015 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1079 pages reserved [ 0.000000] DMA zone: 2864 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000 [ 0.000000] PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000 [ 0.000000] PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000 [ 0.000000] PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000 [ 0.000000] PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000 [ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000 [ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) [ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013240 [ 0.000000] Kernel command line: root=UUID=0a96113a-5259-480a-abac-a27a7f9ae544 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2394.275 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] allocated 52428800 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 3921924k/5177344k available (2010k kernel code, 1049284k absent, 205252k reserved, 971k data, 308k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.55 BogoMIPS (lpj=9577100) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] CPU0: Thermal monitoring handled by SMI [ 0.004000] using mwait in idle threads. [ 0.004000] ACPI: Core revision 20080926 [ 0.024045] Setting APIC routing to flat [ 0.024410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066078] CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b [ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=9575923) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.153224] CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b [ 0.153244] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156018] Brought up 2 CPUs [ 0.156020] Total of 2 processors activated (9576.51 BogoMIPS). [ 0.156093] net_namespace: 1352 bytes [ 0.156131] NET: Registered protocol family 16 [ 0.156131] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.156131] ACPI: bus type pci registered [ 0.156131] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.156131] PCI: Not using MMCONFIG. [ 0.156131] PCI: Using configuration type 1 for base access [ 0.156797] ACPI: EC: Look up EC in DSDT [ 0.160019] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.217099] ACPI: Interpreter enabled [ 0.217102] ACPI: (supports S0 S3 S4 S5) [ 0.217115] ACPI: Using IOAPIC for interrupt routing [ 0.217175] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.225089] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources [ 0.227577] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.240146] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.240146] ACPI: EC: driver started in interrupt mode [ 0.240175] ACPI: No dock devices found. [ 0.240182] ACPI: PCI Root Bridge [C003] (0000:00) [ 0.240201] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.240201] pci 0000:00:01.0: PME# disabled [ 0.240201] pci 0000:00:03.0: reg 10 64bit mmio: [0xe4500000-0xe450000f] [ 0.240201] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.240201] pci 0000:00:03.0: PME# disabled [ 0.240201] pci 0000:00:03.2: reg 10 io port: [0x5000-0x5007] [ 0.240201] pci 0000:00:03.2: reg 14 io port: [0x5008-0x500b] [ 0.240201] pci 0000:00:03.2: reg 18 io port: [0x5010-0x5017] [ 0.240201] pci 0000:00:03.2: reg 1c io port: [0x5018-0x501b] [ 0.240201] pci 0000:00:03.2: reg 20 io port: [0x5020-0x502f] [ 0.240201] pci 0000:00:03.3: reg 10 io port: [0x5030-0x5037] [ 0.240201] pci 0000:00:03.3: reg 14 32bit mmio: [0xe4501000-0xe4501fff] [ 0.240293] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4520000-0xe453ffff] [ 0.240300] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4540000-0xe4540fff] [ 0.240307] pci 0000:00:19.0: reg 18 io port: [0x5040-0x505f] [ 0.240339] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.240343] pci 0000:00:19.0: PME# disabled [ 0.240393] pci 0000:00:1a.0: reg 20 io port: [0x5060-0x507f] [ 0.240451] pci 0000:00:1a.1: reg 20 io port: [0x5080-0x509f] [ 0.240515] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4541000-0xe45413ff] [ 0.240559] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.240564] pci 0000:00:1a.7: PME# disabled [ 0.240615] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4544000-0xe4547fff] [ 0.240653] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.240657] pci 0000:00:1b.0: PME# disabled [ 0.240719] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.240723] pci 0000:00:1c.0: PME# disabled [ 0.240789] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.240793] pci 0000:00:1c.1: PME# disabled [ 0.240862] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.240867] pci 0000:00:1c.4: PME# disabled [ 0.240926] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] [ 0.240984] pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df] [ 0.241041] pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff] [ 0.241105] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4548000-0xe45483ff] [ 0.241149] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.241154] pci 0000:00:1d.7: PME# disabled [ 0.241304] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.241308] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.241342] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.241349] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.241356] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.241363] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.241370] pci 0000:00:1f.1: reg 20 io port: [0x5100-0x510f] [ 0.241436] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7] [ 0.241443] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7] [ 0.241450] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377] [ 0.241457] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577] [ 0.241464] pci 0000:00:1f.2: reg 20 io port: [0x5140-0x515f] [ 0.241471] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4549000-0xe45497ff] [ 0.241490] pci 0000:00:1f.2: PME# supported from D3hot [ 0.241494] pci 0000:00:1f.2: PME# disabled [ 0.241546] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.241553] pci 0000:01:00.0: reg 14 io port: [0x4000-0x40ff] [ 0.241560] pci 0000:01:00.0: reg 18 32bit mmio: [0xe4400000-0xe440ffff] [ 0.241583] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.241593] pci 0000:01:00.0: supports D1 D2 [ 0.241635] pci 0000:01:00.1: reg 10 32bit mmio: [0xe4410000-0xe4413fff] [ 0.241678] pci 0000:01:00.1: supports D1 D2 [ 0.241743] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] [ 0.241745] pci 0000:00:01.0: bridge 32bit mmio: [0xe4400000-0xe44fffff] [ 0.241749] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.241926] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4000000-0xe4001fff] [ 0.244084] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.244096] pci 0000:10:00.0: PME# disabled [ 0.244180] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff] [ 0.244241] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff] [ 0.244246] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.244303] pci 0000:02:06.0: reg 10 32bit mmio: [0xe4100000-0xe4100fff] [ 0.244313] pci 0000:02:06.0: supports D1 D2 [ 0.244315] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244319] pci 0000:02:06.0: PME# disabled [ 0.244361] pci 0000:02:06.1: reg 10 32bit mmio: [0xe4101000-0xe4101fff] [ 0.244372] pci 0000:02:06.1: supports D1 D2 [ 0.244374] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244378] pci 0000:02:06.1: PME# disabled [ 0.244418] pci 0000:02:06.2: reg 10 32bit mmio: [0xe4102000-0xe41027ff] [ 0.244465] pci 0000:02:06.2: supports D1 D2 [ 0.244466] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244470] pci 0000:02:06.2: PME# disabled [ 0.244511] pci 0000:02:06.3: reg 10 32bit mmio: [0xe4103000-0xe41030ff] [ 0.244557] pci 0000:02:06.3: supports D1 D2 [ 0.244558] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244563] pci 0000:02:06.3: PME# disabled [ 0.244606] pci 0000:02:06.4: reg 10 32bit mmio: [0xe4104000-0xe41040ff] [ 0.244653] pci 0000:02:06.4: supports D1 D2 [ 0.244655] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244659] pci 0000:02:06.4: PME# disabled [ 0.244716] pci 0000:00:1e.0: transparent bridge [ 0.244723] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4100000-0xe43fffff] [ 0.244790] bus 00 -> node 0 [ 0.244795] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.245275] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT] [ 0.245396] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT] [ 0.245578] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT] [ 0.245724] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT] [ 0.245871] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT] [ 0.294294] ACPI: PCI Interrupt Link [C12D] (IRQs *10 11) [ 0.294294] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11) [ 0.294294] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11) [ 0.294294] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *5 [ 0.296158] ACPI: PCI Interrupt Link [C140] (IRQs *10 11) [ 0.296380] ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *5 [ 0.296602] ACPI: PCI Interrupt Link [C142] (IRQs 10 *11) [ 0.296705] ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080926] [ 0.296818] ACPI: Power Resource [C22B] (on) [ 0.296818] ACPI: Power Resource [C238] (on) [ 0.296818] ACPI: Power Resource [C254] (on) [ 0.296818] ACPI: Power Resource [C17C] (off) [ 0.296818] ACPI: Power Resource [C363] (off) [ 0.296818] ACPI: Power Resource [C366] (off) [ 0.296818] ACPI: Power Resource [C367] (off) [ 0.296877] ACPI: Power Resource [C368] (off) [ 0.296976] ACPI: Power Resource [C369] (off) [ 0.297021] ACPI: Power Resource [C36A] (off) [ 0.297123] ACPI: Power Resource [C383] (off) [ 0.297223] ACPI: Power Resource [C384] (off) [ 0.297322] ACPI: Power Resource [C385] (off) [ 0.297421] ACPI: Power Resource [C386] (off) [ 0.297520] ACPI: Power Resource [C387] (off) [ 0.297531] PCI: Using ACPI for IRQ routing [ 0.316013] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.316016] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.332005] pnp: PnP ACPI init [ 0.332011] ACPI: bus type pnp registered [ 0.343297] pnp: PnP ACPI: found 16 devices [ 0.343298] ACPI: ACPI bus type pnp unregistered [ 0.343305] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.343307] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.343309] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved [ 0.343316] system 00:0c: ioport range 0x500-0x55f has been reserved [ 0.343318] system 00:0c: ioport range 0x800-0x80f has been reserved [ 0.343321] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.343323] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved [ 0.343327] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.343329] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 0.343331] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 0.343333] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 0.343335] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.343337] system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved [ 0.343339] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.343342] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.343344] system 00:0e: iomem range 0xfed90000-0xfed99fff has been reserved [ 0.343348] system 00:0f: iomem range 0xcf400-0xcffff has been reserved [ 0.343350] system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved [ 0.343352] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.348192] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.348194] pci 0000:00:01.0: IO window: 0x4000-0x4fff [ 0.348198] pci 0000:00:01.0: MEM window: 0xe4400000-0xe44fffff [ 0.348200] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.348204] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 [ 0.348206] pci 0000:00:1c.0: IO window: disabled [ 0.348211] pci 0000:00:1c.0: MEM window: disabled [ 0.348215] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.348222] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10 [ 0.348223] pci 0000:00:1c.1: IO window: disabled [ 0.348229] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe40fffff [ 0.348233] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.348240] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28 [ 0.348243] pci 0000:00:1c.4: IO window: 0x2000-0x3fff [ 0.348248] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff [ 0.348252] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.348262] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.348264] pci 0000:02:06.0: IO window: 0x006000-0x0060ff [ 0.348268] pci 0000:02:06.0: IO window: 0x006400-0x0064ff [ 0.348273] pci 0000:02:06.0: PREFETCH window: 0xc4000000-0xc7ffffff [ 0.348277] pci 0000:02:06.0: MEM window: 0xcc000000-0xcfffffff [ 0.348281] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:04 [ 0.348283] pci 0000:02:06.1: IO window: 0x006800-0x0068ff [ 0.348287] pci 0000:02:06.1: IO window: 0x006c00-0x006cff [ 0.348291] pci 0000:02:06.1: PREFETCH window: 0xc8000000-0xcbffffff [ 0.348296] pci 0000:02:06.1: MEM window: 0xe8000000-0xebffffff [ 0.348300] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.348303] pci 0000:00:1e.0: IO window: 0x6000-0x6fff [ 0.348308] pci 0000:00:1e.0: MEM window: 0xe4100000-0xe43fffff [ 0.348313] pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000cbffffff [ 0.348325] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348328] pci 0000:00:01.0: setting latency timer to 64 [ 0.348335] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348340] pci 0000:00:1c.0: setting latency timer to 64 [ 0.348348] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.348352] pci 0000:00:1c.1: setting latency timer to 64 [ 0.348360] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348364] pci 0000:00:1c.4: setting latency timer to 64 [ 0.348372] pci 0000:00:1e.0: setting latency timer to 64 [ 0.348380] pci 0000:02:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.348389] pci 0000:02:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.348395] bus: 00 index 0 io port: [0x00-0xffff] [ 0.348396] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.348398] bus: 01 index 0 io port: [0x4000-0x4fff] [ 0.348400] bus: 01 index 1 mmio: [0xe4400000-0xe44fffff] [ 0.348401] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.348403] bus: 01 index 3 mmio: [0x0-0x0] [ 0.348404] bus: 08 index 0 mmio: [0x0-0x0] [ 0.348405] bus: 08 index 1 mmio: [0x0-0x0] [ 0.348407] bus: 08 index 2 mmio: [0x0-0x0] [ 0.348408] bus: 08 index 3 mmio: [0x0-0x0] [ 0.348409] bus: 10 index 0 mmio: [0x0-0x0] [ 0.348411] bus: 10 index 1 mmio: [0xe4000000-0xe40fffff] [ 0.348412] bus: 10 index 2 mmio: [0x0-0x0] [ 0.348413] bus: 10 index 3 mmio: [0x0-0x0] [ 0.348415] bus: 28 index 0 io port: [0x2000-0x3fff] [ 0.348417] bus: 28 index 1 mmio: [0xe0000000-0xe3ffffff] [ 0.348418] bus: 28 index 2 mmio: [0x0-0x0] [ 0.348419] bus: 28 index 3 mmio: [0x0-0x0] [ 0.348421] bus: 02 index 0 io port: [0x6000-0x6fff] [ 0.348422] bus: 02 index 1 mmio: [0xe4100000-0xe43fffff] [ 0.348424] bus: 02 index 2 mmio: [0xc4000000-0xcbffffff] [ 0.348425] bus: 02 index 3 io port: [0x00-0xffff] [ 0.348427] bus: 02 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.348428] bus: 03 index 0 io port: [0x6000-0x60ff] [ 0.348430] bus: 03 index 1 io port: [0x6400-0x64ff] [ 0.348431] bus: 03 index 2 mmio: [0xc4000000-0xc7ffffff] [ 0.348433] bus: 03 index 3 mmio: [0xcc000000-0xcfffffff] [ 0.348434] bus: 04 index 0 io port: [0x6800-0x68ff] [ 0.348436] bus: 04 index 1 io port: [0x6c00-0x6cff] [ 0.348437] bus: 04 index 2 mmio: [0xc8000000-0xcbffffff] [ 0.348439] bus: 04 index 3 mmio: [0xe8000000-0xebffffff] [ 0.348446] NET: Registered protocol family 2 [ 0.388027] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.388435] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.390269] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.390902] TCP: Hash tables configured (established 262144 bind 65536) [ 0.390904] TCP reno registered [ 0.400077] NET: Registered protocol family 1 [ 0.400172] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.503979] Switched to high resolution mode on CPU 0 [ 0.597633] it is [ 0.807528] Freeing initrd memory: 6037k freed [ 0.810679] audit: initializing netlink socket (disabled) [ 0.810697] type=2000 audit(1235724866.809:1): initialized [ 0.811023] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.812645] VFS: Disk quotas dquot_6.5.1 [ 0.812701] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.812774] msgmni has been set to 7673 [ 0.812903] alg: No test for stdrng (krng) [ 0.812971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.812973] io scheduler noop registered [ 0.813022] io scheduler cfq registered (default) [ 0.813164] pci 0000:01:00.0: Boot video device [ 0.820888] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.820915] pcieport-driver 0000:00:01.0: found MSI capability [ 0.820935] pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X [ 0.820943] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.820972] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.821059] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.821104] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.821134] pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X [ 0.821149] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.821184] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.821276] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.821321] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.821352] pcieport-driver 0000:00:1c.1: irq 317 for MSI/MSI-X [ 0.821367] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.821394] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.821422] pci_express 0000:00:1c.1:pcie03: allocate port service [ 0.821507] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.821553] pcieport-driver 0000:00:1c.4: found MSI capability [ 0.821584] pcieport-driver 0000:00:1c.4: irq 316 for MSI/MSI-X [ 0.821598] pci_express 0000:00:1c.4:pcie00: allocate port service [ 0.821625] pci_express 0000:00:1c.4:pcie02: allocate port service [ 0.821651] pci_express 0000:00:1c.4:pcie03: allocate port service [ 0.823802] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 0.823940] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.824427] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.824625] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.824682] 0000:00:03.3: ttyS1 at I/O 0x5030 (irq = 17) is a 16550A [ 0.825701] brd: module loaded [ 0.825781] PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12 [ 0.827564] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.828270] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.828275] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.828279] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.828281] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.828283] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.828366] mice: PS/2 mouse device common for all mice [ 0.828407] cpuidle: using governor ladder [ 0.828408] cpuidle: using governor menu [ 0.828644] TCP cubic registered [ 0.828916] Freeing unused kernel memory: 308k freed [ 0.829042] Write protecting the kernel read-only data: 2708k [ 0.903708] fuse init (API version 7.10) [ 0.919752] fan PNP0C0B:00: registered as cooling_device0 [ 0.919757] ACPI: Fan [C36B] (off) [ 0.919980] fan PNP0C0B:01: registered as cooling_device1 [ 0.919985] ACPI: Fan [C36C] (off) [ 0.920217] fan PNP0C0B:02: registered as cooling_device2 [ 0.920221] ACPI: Fan [C36D] (off) [ 0.920441] fan PNP0C0B:03: registered as cooling_device3 [ 0.920446] ACPI: Fan [C36E] (off) [ 0.920668] fan PNP0C0B:04: registered as cooling_device4 [ 0.920672] ACPI: Fan [C36F] (off) [ 0.920781] fan PNP0C0B:05: registered as cooling_device5 [ 0.920785] ACPI: Fan [C370] (off) [ 0.921010] fan PNP0C0B:06: registered as cooling_device6 [ 0.921014] ACPI: Fan [C388] (off) [ 0.921235] fan PNP0C0B:07: registered as cooling_device7 [ 0.921240] ACPI: Fan [C389] (off) [ 0.921469] fan PNP0C0B:08: registered as cooling_device8 [ 0.921474] ACPI: Fan [C38A] (off) [ 0.921695] fan PNP0C0B:09: registered as cooling_device9 [ 0.921700] ACPI: Fan [C38B] (off) [ 0.921920] fan PNP0C0B:0a: registered as cooling_device10 [ 0.921924] ACPI: Fan [C38C] (off) [ 0.936435] ACPI: SSDT BFFDB95D, 02C1 (r1 HP Cpu0Ist 3000 INTL 20060317) [ 0.936867] ACPI: SSDT BFFDBCA3, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317) [ 0.939358] Monitor-Mwait will be used to enter C-1 state [ 0.939361] Monitor-Mwait will be used to enter C-2 state [ 0.939460] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 0.939490] processor ACPI_CPU:00: registered as cooling_device11 [ 0.939493] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.939807] ACPI: SSDT BFFDB895, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 0.940136] ACPI: SSDT BFFDBC1E, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 0.941053] Marking TSC unstable due to TSC halts in idle [ 0.941158] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 0.952056] processor ACPI_CPU:01: registered as cooling_device12 [ 0.952059] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.959552] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.977981] ACPI: Thermal Zone [TZ2] (68 C) [ 0.981145] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.982793] ACPI: Thermal Zone [TZ3] (64 C) [ 0.990064] thermal LNXTHERM:03: registered as thermal_zone2 [ 1.002197] ACPI: Thermal Zone [TZ4] (36 C) [ 1.004899] thermal LNXTHERM:04: registered as thermal_zone3 [ 1.010886] ACPI: Thermal Zone [TZ5] (73 C) [ 1.028864] thermal LNXTHERM:05: registered as thermal_zone4 [ 1.049117] ACPI: Thermal Zone [TZ0] (85 C) [ 1.052094] thermal LNXTHERM:06: registered as thermal_zone5 [ 1.053884] ACPI: Thermal Zone [TZ1] (84 C) [ 1.060261] device-mapper: uevent: version 1.0.3 [ 1.060354] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.314174] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 1.314176] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.314222] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.314232] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.314341] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [ 1.323515] usbcore: registered new interface driver usbfs [ 1.323538] usbcore: registered new interface driver hub [ 1.323560] usbcore: registered new device driver usb [ 1.324673] uhci_hcd: USB Universal Host Controller Interface driver [ 1.328569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.328571] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.368053] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.368215] SCSI subsystem initialized [ 1.388038] libata version 3.00 loaded. [ 1.441423] ohci1394 0000:02:06.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.493175] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e4102000-e41027ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.529611] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:4b:7a:9d:98 [ 1.529613] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.529654] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff [ 1.529887] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.529896] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.529901] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.529929] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.529973] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005060 [ 1.530055] usb usb1: configuration #1 chosen from 1 choice [ 1.530079] hub 1-0:1.0: USB hub found [ 1.530084] hub 1-0:1.0: 2 ports detected [ 1.530188] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.530208] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.530211] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.530230] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2 [ 1.534136] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.534144] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.534148] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4541000 [ 1.552053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.552099] usb usb2: configuration #1 chosen from 1 choice [ 1.552119] hub 2-0:1.0: USB hub found [ 1.552125] hub 2-0:1.0: 4 ports detected [ 1.552213] ata_piix 0000:00:1f.1: version 2.12 [ 1.552220] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.552256] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.552989] scsi0 : ata_piix [ 1.553137] scsi1 : ata_piix [ 1.553679] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5100 irq 14 [ 1.553681] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5108 irq 15 [ 1.716517] ata1.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 [ 1.732394] ata1.00: configured for MWDMA2 [ 1.732898] ata2: port disabled. ignoring. [ 1.734994] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 [ 1.735267] ahci 0000:00:1f.2: version 3.0 [ 1.735279] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.735345] ahci 0000:00:1f.2: irq 314 for MSI/MSI-X [ 1.735394] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 1.735396] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 1.735401] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.735963] scsi2 : ahci [ 1.736186] scsi3 : ahci [ 1.736657] scsi4 : ahci [ 1.736708] ata3: SATA max UDMA/133 abar m2048@0xe4549000 port 0xe4549100 irq 314 [ 1.736710] ata4: DUMMY [ 1.736711] ata5: DUMMY [ 1.739999] Driver 'sr' needs updating - please use bus_type methods [ 1.744566] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.744568] Uniform CD-ROM driver Revision: 3.20 [ 1.744630] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.747438] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.976052] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 2.000066] Clocksource tsc unstable (delta = -187059999 ns) [ 2.056073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.058345] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.058347] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 2.058591] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 2.058593] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.059322] ata3.00: ATA-8: Hitachi HTS722012K9SA00, DCCOC60A, max UDMA/100 [ 2.059324] ata3.00: 234441648 sectors, multi 16: LBA48 [ 2.061809] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.061812] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out [ 2.062035] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded [ 2.062037] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.062786] ata3.00: configured for UDMA/100 [ 2.077855] ata3.00: configured for UDMA/100 [ 2.077857] ata3: EH complete [ 2.077946] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72201 DCCO PQ: 0 ANSI: 5 [ 2.078024] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.078406] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.078417] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.078420] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.078448] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 2.078486] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005080 [ 2.078558] usb usb3: configuration #1 chosen from 1 choice [ 2.078580] hub 3-0:1.0: USB hub found [ 2.078585] hub 3-0:1.0: 2 ports detected [ 2.078684] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.078732] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.078735] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.078755] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 2.082673] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.082680] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.082692] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4548000 [ 2.086224] Driver 'sd' needs updating - please use bus_type methods [ 2.086294] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 2.086305] sd 2:0:0:0: [sda] Write Protect is off [ 2.086307] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.086324] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.086366] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 2.086376] sd 2:0:0:0: [sda] Write Protect is off [ 2.086378] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.086394] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.086397] sda: sda1 sda2 <<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.100124] usb usb4: configuration #1 chosen from 1 choice [ 2.100157] hub 4-0:1.0: USB hub found [ 2.100162] hub 4-0:1.0: 6 ports detected [ 2.100472] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.100481] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.100484] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.100505] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.100530] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000050a0 [ 2.100592] usb usb5: configuration #1 chosen from 1 choice [ 2.100613] hub 5-0:1.0: USB hub found [ 2.100618] hub 5-0:1.0: 2 ports detected [ 2.100698] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 2.100704] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.100707] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.100722] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.100756] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000050c0 [ 2.100813] usb usb6: configuration #1 chosen from 1 choice [ 2.100833] hub 6-0:1.0: USB hub found [ 2.100837] hub 6-0:1.0: 2 ports detected [ 2.100913] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.100919] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.100922] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.100938] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.100964] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 2.101021] usb usb7: configuration #1 chosen from 1 choice [ 2.101040] hub 7-0:1.0: USB hub found [ 2.101045] hub 7-0:1.0: 2 ports detected [ 2.108374] usb 2-2: configuration #1 chosen from 1 choice [ 2.108463] hub 2-2:1.0: USB hub found [ 2.108568] hub 2-2:1.0: 4 ports detected [ 2.119978] sda5 > [ 2.120114] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.221074] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 2.342684] PM: Starting manual resume from disk [ 2.342686] PM: Resume from partition 8:5 [ 2.342687] PM: Checking hibernation image. [ 2.342841] PM: Resume from disk failed. [ 2.352396] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.352397] EXT3-fs: write access will be enabled during recovery. [ 2.352507] usb 2-4: configuration #1 chosen from 1 choice [ 2.352618] hub 2-4:1.0: USB hub found [ 2.352727] hub 2-4:1.0: 4 ports detected [ 2.592050] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 2.764113] usb 1-1: configuration #1 chosen from 1 choice [ 2.764128] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929ed5e0e] [ 2.948243] usb 2-2.2: new full speed USB device using ehci_hcd and address 5 [ 3.041287] usb 2-2.2: configuration #1 chosen from 1 choice [ 3.041488] hub 2-2.2:1.0: USB hub found [ 3.041595] hub 2-2.2:1.0: 4 ports detected [ 3.284070] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 3.445687] usb 5-2: configuration #1 chosen from 1 choice [ 3.521234] usb 2-2.2.1: new low speed USB device using ehci_hcd and address 6 [ 3.618550] usb 2-2.2.1: configuration #1 chosen from 1 choice [ 3.625591] usbcore: registered new interface driver hiddev [ 3.628431] input: Logitech USB Receiver as /class/input/input1 [ 3.644094] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.7-2.2.1/input0 [ 3.650693] input: Logitech USB Receiver as /class/input/input2 [ 3.676098] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-2.2.1/input1 [ 3.676113] usbcore: registered new interface driver usbhid [ 3.676116] usbhid: v2.6:USB HID core driver [ 3.942070] kjournald starting. Commit interval 5 seconds [ 3.942080] EXT3-fs: sda1: orphan cleanup on readonly fs [ 3.942085] ext3_orphan_cleanup: deleting unreferenced inode 3538994 [ 4.018044] ext3_orphan_cleanup: deleting unreferenced inode 3538995 [ 5.008309] ext3_orphan_cleanup: deleting unreferenced inode 3538996 [ 5.008534] EXT3-fs: sda1: 3 orphan inodes deleted [ 5.008536] EXT3-fs: recovery complete. [ 5.031526] EXT3-fs: mounted filesystem with ordered data mode. [ 10.598203] udevd version 124 started [ 11.194666] device-mapper: multipath: version 1.0.5 loaded [ 11.605406] input: PC Speaker as /class/input/input3 [ 11.860072] cfg80211: Calling CRDA to update world regulatory domain [ 11.989373] iTCO_vendor_support: vendor-support=0 [ 12.027473] ACPI: AC Adapter [C1F2] (on-line) [ 12.028530] input: Power Button (FF) as /class/input/input4 [ 12.057091] ACPI: Power Button (FF) [PWRF] [ 12.093557] ACPI: Battery Slot [C1F4] (battery present) [ 12.093657] input: Sleep Button (CM) as /class/input/input5 [ 12.100665] tpm_inf_pnp 00:04: Found C239 with ID IFX0102 [ 12.100718] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 12.131053] ACPI: Sleep Button (CM) [C274] [ 12.131279] ACPI: Battery Slot [C1F3] (battery absent) [ 12.131368] input: Lid Switch as /class/input/input6 [ 12.145677] acpi device:03: registered as cooling_device13 [ 12.146603] input: Video Bus as /class/input/input7 [ 12.149303] ACPI: Lid Switch [C26E] [ 12.181098] ACPI: Video Device [C14B] (multi-head: yes rom: no post: no) [ 12.352636] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c5] [ 12.480847] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 12.480851] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 12.480855] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 12.480857] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 12.480859] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 12.481330] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30c5] [ 12.608872] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 17 [ 12.608875] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 12.608878] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 12.608884] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff [ 12.608886] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 12.608888] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff [ 12.612217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 12.612321] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 12.612389] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.659019] ACPI: WMI: Mapper loaded [ 12.674700] Registered led device: hp:red:hddprotection [ 12.674716] leds-hp-disk driver loaded. [ 12.697852] lis3lv02d driver loaded. [ 12.804334] Bluetooth: Core ver 2.13 [ 12.804379] NET: Registered protocol family 31 [ 12.804381] Bluetooth: HCI device and connection manager initialized [ 12.804383] Bluetooth: HCI socket layer initialized [ 12.891669] ricoh-mmc: Ricoh MMC Controller disabling driver [ 12.891671] ricoh-mmc: Copyright(c) Philip Langdale [ 12.891697] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 12.891714] ricoh-mmc: Controller is now disabled. [ 12.998175] sdhci: Secure Digital Host Controller Interface driver [ 12.998177] sdhci: Copyright(c) Pierre Ossman [ 12.999201] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 12.999218] sdhci-pci 0000:02:06.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 13.002316] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 13.051416] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 13.051506] usbcore: registered new interface driver btusb [ 13.087618] parport_pc 00:03: reported by Plug and Play ACPI [ 13.087694] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 13.245043] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 13.256724] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 13.256726] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 13.257134] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.257163] iwlagn 0000:10:00.0: setting latency timer to 64 [ 13.257252] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 13.294165] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 13.294174] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 13.294214] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.307148] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels [ 13.307462] iwlagn 0000:10:00.0: PCI INT A disabled [ 13.308817] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 13.388689] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.388720] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 13.464044] pcmcia_socket pcmcia_socket1: cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff [ 13.464060] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff [ 13.469113] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 [ 13.705853] lp0: using parport0 (interrupt-driven). [ 13.808330] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k [ 14.336186] EXT3 FS on sda1, internal journal [ 15.467611] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.187689] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 17.586685] NET: Registered protocol family 10 [ 17.586994] lo: Disabled Privacy Extensions [ 22.929666] ppdev: user-space parallel port driver [ 28.680117] Bluetooth: L2CAP ver 2.11 [ 28.680122] Bluetooth: L2CAP socket layer initialized [ 28.694503] Bluetooth: SCO (Voice Link) ver 0.6 [ 28.694508] Bluetooth: SCO socket layer initialized [ 28.771491] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.771497] Bluetooth: BNEP filters: protocol multicast [ 28.949885] Bridge firewalling registered [ 28.987856] Bluetooth: RFCOMM socket layer initialized [ 28.987876] Bluetooth: RFCOMM TTY layer initialized [ 28.987880] Bluetooth: RFCOMM ver 1.10 [ 31.119149] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.353144] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [ 33.409127] e1000e 0000:00:19.0: irq 315 for MSI/MSI-X [ 33.410763] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.413654] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 33.413791] iwlagn 0000:10:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 33.413956] iwlagn 0000:10:00.0: irq 313 for MSI/MSI-X [ 33.414066] iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 33.873691] Registered led device: iwl-phy0:radio [ 33.873734] Registered led device: iwl-phy0:assoc [ 33.873779] Registered led device: iwl-phy0:RX [ 33.873818] Registered led device: iwl-phy0:TX [ 33.919296] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.274022] NET: Registered protocol family 17 [ 35.893647] 0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 35.895069] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 46.124069] eth0: no IPv6 routers present [ 134.240205] ppdev0: registered pardevice [ 134.288090] ppdev0: unregistered pardevice [ 134.577400] ppdev0: registered pardevice [ 134.624318] ppdev0: unregistered pardevice [ 136.324536] ppdev0: registered pardevice [ 136.372155] ppdev0: unregistered pardevice