| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 10 Mar 2009 10:57:16 +0800
From: Huang Ying <ying.huang@...el.com>
To: Ingo Molnar <mingo@...e.hu>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Vivek Goyal <vgoyal@...hat.com>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH -v2 3/3] kexec x86_64: Add kexec jump support for x86_64
This patch add kexec jump support for x86_64. More information about
kexec jump can be found in corresponding x86_32 support patch.
v2:
- rebased on x86 git
- fix code style
Signed-off-by: Huang Ying <ying.huang@...el.com>
---
arch/x86/Kconfig | 2
arch/x86/include/asm/kexec.h | 13 +-
arch/x86/kernel/machine_kexec_64.c | 42 +++++++-
arch/x86/kernel/relocate_kernel_64.S | 177 ++++++++++++++++++++++++++++-------
arch/x86/kernel/vmlinux_64.lds.S | 7 +
5 files changed, 197 insertions(+), 44 deletions(-)
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -13,6 +13,7 @@
#include <linux/numa.h>
#include <linux/ftrace.h>
#include <linux/io.h>
+#include <linux/suspend.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
@@ -270,19 +271,43 @@ void machine_kexec(struct kimage *image)
{
unsigned long page_list[PAGES_NR];
void *control_page;
+ int save_ftrace_enabled;
- tracer_disable();
+#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context)
+ save_processor_state();
+#endif
+
+ save_ftrace_enabled = __ftrace_enabled_save();
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
+ if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+ /*
+ * We need to put APICs in legacy mode so that we can
+ * get timer interrupts in second kernel. kexec/kdump
+ * paths already have calls to disable_IO_APIC() in
+ * one form or other. kexec jump path also need
+ * one.
+ */
+ disable_IO_APIC();
+#endif
+ }
+
control_page = page_address(image->control_code_page) + PAGE_SIZE;
- memcpy(control_page, relocate_kernel, PAGE_SIZE);
+ memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
+ page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
page_list[PA_TABLE_PAGE] =
(unsigned long)__pa(page_address(image->control_code_page));
+ if (image->type == KEXEC_TYPE_DEFAULT)
+ page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
+ << PAGE_SHIFT);
+
/*
* The segment registers are funny things, they have both a
* visible and an invisible part. Whenever the visible part is
@@ -302,8 +327,17 @@ void machine_kexec(struct kimage *image)
set_idt(phys_to_virt(0), 0);
/* now call it */
- relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
- image->start);
+ image->start = relocate_kernel((unsigned long)image->head,
+ (unsigned long)page_list,
+ image->start,
+ image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context)
+ restore_processor_state();
+#endif
+
+ __ftrace_enabled_restore(save_ftrace_enabled);
}
void arch_crash_save_vmcoreinfo(void)
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -9,13 +9,13 @@
# define PAGES_NR 4
#else
# define PA_CONTROL_PAGE 0
-# define PA_TABLE_PAGE 1
-# define PAGES_NR 2
+# define VA_CONTROL_PAGE 1
+# define PA_TABLE_PAGE 2
+# define PA_SWAP_PAGE 3
+# define PAGES_NR 4
#endif
-#ifdef CONFIG_X86_32
# define KEXEC_CONTROL_CODE_MAX_SIZE 2048
-#endif
#ifndef __ASSEMBLY__
@@ -136,10 +136,11 @@ relocate_kernel(unsigned long indirectio
unsigned int has_pae,
unsigned int preserve_context);
#else
-NORET_TYPE void
+unsigned long
relocate_kernel(unsigned long indirection_page,
unsigned long page_list,
- unsigned long start_address) ATTRIB_NORET;
+ unsigned long start_address,
+ unsigned int preserve_context);
#endif
#define ARCH_HAS_KIMAGE_ARCH
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -19,6 +19,24 @@
#define PTR(x) (x << 3)
#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+/*
+ * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
+ */
+#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
+
+/* Minimal CPU state */
+#define RSP DATA(0x0)
+#define CR0 DATA(0x8)
+#define CR3 DATA(0x10)
+#define CR4 DATA(0x18)
+
+/* other data */
+#define CP_PA_TABLE_PAGE DATA(0x20)
+#define CP_PA_SWAP_PAGE DATA(0x28)
+#define CP_PA_BACKUP_PAGES_MAP DATA(0x30)
+
.text
.align PAGE_SIZE
.code64
@@ -28,8 +46,27 @@ relocate_kernel:
* %rdi indirection_page
* %rsi page_list
* %rdx start address
+ * %rcx preserve_context
*/
+ /* Save the CPU context, used for jumping back */
+ pushq %rbx
+ pushq %rbp
+ pushq %r12
+ pushq %r13
+ pushq %r14
+ pushq %r15
+ pushf
+
+ movq PTR(VA_CONTROL_PAGE)(%rsi), %r11
+ movq %rsp, RSP(%r11)
+ movq %cr0, %rax
+ movq %rax, CR0(%r11)
+ movq %cr3, %rax
+ movq %rax, CR3(%r11)
+ movq %cr4, %rax
+ movq %rax, CR4(%r11)
+
/* zero out flags, and disable interrupts */
pushq $0
popfq
@@ -41,10 +78,18 @@ relocate_kernel:
movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
/* get physical address of page table now too */
- movq PTR(PA_TABLE_PAGE)(%rsi), %rcx
+ movq PTR(PA_TABLE_PAGE)(%rsi), %r9
+
+ /* get physical address of swap page now */
+ movq PTR(PA_SWAP_PAGE)(%rsi), %r10
+
+ /* save some information for jumping back */
+ movq %r9, CP_PA_TABLE_PAGE(%r11)
+ movq %r10, CP_PA_SWAP_PAGE(%r11)
+ movq %rdi, CP_PA_BACKUP_PAGES_MAP(%r11)
/* Switch to the identity mapped page tables */
- movq %rcx, %cr3
+ movq %r9, %cr3
/* setup a new stack at the end of the physical control page */
lea PAGE_SIZE(%r8), %rsp
@@ -83,9 +128,87 @@ identity_mapped:
1:
/* Flush the TLB (needed?) */
- movq %rcx, %cr3
+ movq %r9, %cr3
+
+ movq %rcx, %r11
+ call swap_pages
+
+ /*
+ * To be certain of avoiding problems with self-modifying code
+ * I need to execute a serializing instruction here.
+ * So I flush the TLB by reloading %cr3 here, it's handy,
+ * and not processor dependent.
+ */
+ movq %cr3, %rax
+ movq %rax, %cr3
+
+ /*
+ * set all of the registers to known values
+ * leave %rsp alone
+ */
+
+ testq %r11, %r11
+ jnz 1f
+ xorq %rax, %rax
+ xorq %rbx, %rbx
+ xorq %rcx, %rcx
+ xorq %rdx, %rdx
+ xorq %rsi, %rsi
+ xorq %rdi, %rdi
+ xorq %rbp, %rbp
+ xorq %r8, %r8
+ xorq %r9, %r9
+ xorq %r10, %r9
+ xorq %r11, %r11
+ xorq %r12, %r12
+ xorq %r13, %r13
+ xorq %r14, %r14
+ xorq %r15, %r15
+
+ ret
+
+1:
+ popq %rdx
+ leaq PAGE_SIZE(%r10), %rsp
+ call *%rdx
+
+ /* get the re-entry point of the peer system */
+ movq 0(%rsp), %rbp
+ call 1f
+1:
+ popq %r8
+ subq $(1b - relocate_kernel), %r8
+ movq CP_PA_SWAP_PAGE(%r8), %r10
+ movq CP_PA_BACKUP_PAGES_MAP(%r8), %rdi
+ movq CP_PA_TABLE_PAGE(%r8), %rax
+ movq %rax, %cr3
+ lea PAGE_SIZE(%r8), %rsp
+ call swap_pages
+ movq $virtual_mapped, %rax
+ pushq %rax
+ ret
+
+virtual_mapped:
+ movq RSP(%r8), %rsp
+ movq CR4(%r8), %rax
+ movq %rax, %cr4
+ movq CR3(%r8), %rax
+ movq CR0(%r8), %r8
+ movq %rax, %cr3
+ movq %r8, %cr0
+ movq %rbp, %rax
+
+ popf
+ popq %r15
+ popq %r14
+ popq %r13
+ popq %r12
+ popq %rbp
+ popq %rbx
+ ret
/* Do the copies */
+swap_pages:
movq %rdi, %rcx /* Put the page_list in %rcx */
xorq %rdi, %rdi
xorq %rsi, %rsi
@@ -117,39 +240,27 @@ identity_mapped:
movq %rcx, %rsi /* For ever source page do a copy */
andq $0xfffffffffffff000, %rsi
+ movq %rdi, %rdx
+ movq %rsi, %rax
+
+ movq %r10, %rdi
movq $512, %rcx
rep ; movsq
- jmp 0b
-3:
-
- /*
- * To be certain of avoiding problems with self-modifying code
- * I need to execute a serializing instruction here.
- * So I flush the TLB by reloading %cr3 here, it's handy,
- * and not processor dependent.
- */
- movq %cr3, %rax
- movq %rax, %cr3
- /*
- * set all of the registers to known values
- * leave %rsp alone
- */
+ movq %rax, %rdi
+ movq %rdx, %rsi
+ movq $512, %rcx
+ rep ; movsq
- xorq %rax, %rax
- xorq %rbx, %rbx
- xorq %rcx, %rcx
- xorq %rdx, %rdx
- xorq %rsi, %rsi
- xorq %rdi, %rdi
- xorq %rbp, %rbp
- xorq %r8, %r8
- xorq %r9, %r9
- xorq %r10, %r9
- xorq %r11, %r11
- xorq %r12, %r12
- xorq %r13, %r13
- xorq %r14, %r14
- xorq %r15, %r15
+ movq %rdx, %rdi
+ movq %r10, %rsi
+ movq $512, %rcx
+ rep ; movsq
+ lea PAGE_SIZE(%rax), %rsi
+ jmp 0b
+3:
ret
+
+ .globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -275,3 +275,10 @@ ASSERT((_end - _text <= KERNEL_IMAGE_SIZ
ASSERT((per_cpu__irq_stack_union == 0),
"irq_stack_union is not at start of per-cpu area");
#endif
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big")
+#endif
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1439,7 +1439,7 @@ config CRASH_DUMP
config KEXEC_JUMP
bool "kexec jump (EXPERIMENTAL)"
depends on EXPERIMENTAL
- depends on KEXEC && HIBERNATION && X86_32
+ depends on KEXEC && HIBERNATION
---help---
Jump between original kernel and kexeced kernel and invoke
code in physical address mode via KEXEC
Download attachment "signature.asc" of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists