linux-kernel - Re: [PATCH 03/14] x86, config: change defaults PHYSICAL_START and PHYSICAL

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 8 May 2009 09:36:06 +0200
From:	Sam Ravnborg <sam@...nborg.org>
To:	"H. Peter Anvin" <hpa@...ux.intel.com>
Cc:	linux-kernel@...r.kernel.org, vgoyal@...hat.com, hbabu@...ibm.com,
	kexec@...ts.infradead.org, ying.huang@...el.com, mingo@...e.hu,
	tglx@...utronix.de, ebiederm@...ssion.com,
	"H. Peter Anvin" <hpa@...or.com>
Subject: Re: [PATCH 03/14] x86, config: change defaults PHYSICAL_START and PHYSICAL_ALIGN

On Thu, May 07, 2009 at 03:26:51PM -0700, H. Peter Anvin wrote:
> From: H. Peter Anvin <hpa@...or.com>
> 
> Change the default for CONFIG_PHYSICAL_START to 16 MB; 4 MB if
> EMBEDDED.  Change the default for CONFIG_PHYSICAL_ALIGN to match up
> with a large page alignment datum (4 MB for non-PAE, 2 MB for PAE.)
> 
> The default of 16 MB is designed to avoid occupying ZONE_DMA, as well
> as avoiding a 15-16 MB memory hole, which some vendors inexplicably
> still have in their systems.
> 
> [ Impact: minor performance improvement, leave ZONE_DMA free ]
> 
> Signed-off-by: H. Peter Anvin <hpa@...or.com>
> ---
>  arch/x86/Kconfig |   19 +++++++++++--------
>  1 files changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 039c3f0..13b3a5a 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1455,17 +1455,20 @@ config KEXEC_JUMP
>  
>  config PHYSICAL_START
>  	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
> -	default "0x1000000" if X86_NUMAQ
> -	default "0x200000" if X86_64
> -	default "0x100000"
> +	default "0x400000" if EMBEDDED
> +	default "0x1000000"
>  	---help---
>  	  This gives the physical address where the kernel is loaded.
>  
>  	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
>  	  bzImage will decompress itself to above physical address and
> -	  run from there. Otherwise, bzImage will run from the address where
> -	  it has been loaded by the boot loader and will ignore above physical
> -	  address.
> +	  run from there. Otherwise, bzImage will run from the either
> +	  the above physical address or where it has been loaded by
> +	  the boot loader, whichever is higher.
> +
> +	  For embedded machines with very small memory (less than
> +	  about 24 MB) this may need to be adjusted downward from the
> +	  default value of 0x1000000 (16 MB).

But in the above you say that default is "0x400000" if EMBEDDED
That is in contradiction with the help - no?

	Sam
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/