| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 17 May 2009 19:21:09 -0700
From: Joe Perches <joe@...ches.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Cc: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
Sergei Shtylyov <sshtylyov@...mvista.com>,
Joe Perches <joe@...ches.com>
Subject: [PATCH 1/6] drivers/ide: Convert printk(KERN_DEBUG to pr_debug(
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/ide/ali14xx.c | 8 ++++----
drivers/ide/hpt366.c | 2 +-
drivers/ide/ide-acpi.c | 9 ++++-----
drivers/ide/ide-cs.c | 2 +-
drivers/ide/ide-iops.c | 3 +--
drivers/ide/ide-probe.c | 9 +++++----
drivers/ide/ide-xfer-mode.c | 6 +++---
drivers/ide/pdc202xx_old.c | 6 +++---
drivers/ide/pmac.c | 2 +-
drivers/ide/qd65xx.c | 11 +++++------
drivers/ide/serverworks.c | 4 ++--
drivers/ide/sl82c105.c | 6 +++---
12 files changed, 33 insertions(+), 35 deletions(-)
diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c
index 90da1f9..5ac2174 100644
--- a/drivers/ide/ali14xx.c
+++ b/drivers/ide/ali14xx.c
@@ -127,8 +127,8 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
param3 += 8;
param4 += 8;
}
- printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
- drive->name, pio, time1, time2, param1, param2, param3, param4);
+ pr_debug("%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n",
+ drive->name, pio, time1, time2, param1, param2, param3, param4);
/* stuff timing parameters into controller registers */
driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
@@ -208,8 +208,8 @@ static const struct ide_port_info ali14xx_port_info = {
static int __init ali14xx_probe(void)
{
- printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
- basePort, regOn);
+ pr_debug("ali14xx: base=0x%03x, regOn=0x%02x.\n",
+ basePort, regOn);
/* initialize controller registers */
if (!initRegisters()) {
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 0feb66c..0debe3c 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -805,7 +805,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive)
u8 dma_cmd;
pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
- printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
+ pr_debug("%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
/* get DMA command mode */
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 77f79d2..c2f7c2f 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -45,8 +45,8 @@ struct ide_acpi_hwif_link {
#undef DEBUGGING
/* note: adds function name and KERN_DEBUG */
#ifdef DEBUGGING
-#define DEBPRINT(fmt, args...) \
- printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
+#define DEBPRINT(fmt, args...) \
+ pr_debug("%s: " fmt, __func__, ## args)
#else
#define DEBPRINT(fmt, args...) do {} while (0)
#endif /* DEBUGGING */
@@ -236,9 +236,8 @@ static int do_drive_get_GTF(ide_drive_t *drive,
status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF",
NULL, &output);
if (ACPI_FAILURE(status)) {
- printk(KERN_DEBUG
- "%s: Run _GTF error: status = 0x%x\n",
- __func__, status);
+ pr_debug("%s: Run _GTF error: status = 0x%x\n",
+ __func__, status);
goto out;
}
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 9e47f35..10adf8e 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -64,7 +64,7 @@ MODULE_LICENSE("Dual MPL/GPL");
#ifdef CONFIG_PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+#define DEBUG(n, args...) if (pc_debug>(n)) pr_debug(args)
#else
#define DEBUG(n, args...)
#endif
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c19a221..b245f39 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -236,8 +236,7 @@ u8 eighty_ninty_three(ide_drive_t *drive)
return 1;
if (ivb)
- printk(KERN_DEBUG "%s: skipping word 93 validity check\n",
- drive->name);
+ pr_debug("%s: skipping word 93 validity check\n", drive->name);
if (ata_id_is_sata(id) && !ivb)
return 1;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 7f264ed..8849e55 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -604,7 +604,7 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
ide_drive_t *drive;
int i, rc;
- printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
+ pr_debug("Probing IDE interface %s...\n", hwif->name);
/* Let HW settle down a bit from whatever init state we
* come from */
@@ -630,8 +630,8 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
if (rc)
goto out;
} else
- printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n",
- drive->name);
+ pr_debug("%s: ide_wait_not_busy() skipped\n",
+ drive->name);
}
out:
/* Exit function with master reselected (let's be sane) */
@@ -700,7 +700,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
disable_irq(hwif->irq);
if (ide_port_wait_ready(hwif) == -EBUSY)
- printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
+ pr_debug("%s: Wait for ready failed before probe !\n",
+ hwif->name);
/*
* Second drive should only exist if first drive was found,
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c
index af44be9..e9d75e7 100644
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -183,9 +183,9 @@ void ide_set_pio(ide_drive_t *drive, u8 req_pio)
* - report device max PIO mode
* - check req_pio != 255 against device max PIO mode
*/
- printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
- drive->name, host_pio, req_pio,
- req_pio == 255 ? "(auto-tune)" : "", pio);
+ pr_debug("%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
+ drive->name, host_pio, req_pio,
+ req_pio == 255 ? "(auto-tune)" : "", pio);
(void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
}
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 248a54b..3e07c0b 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -103,9 +103,9 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
}
#if PDC202XX_DEBUG_DRIVE_INFO
- printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
- drive->name, ide_xfer_verbose(speed),
- drive->dn, drive_conf);
+ pr_debug("%s: %s drive%d 0x%08x ",
+ drive->name, ide_xfer_verbose(speed),
+ drive->dn, drive_conf);
pci_read_config_dword(dev, drive_pci, &drive_conf);
printk("0x%08x\n", drive_conf);
#endif
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index f76e4e6..a719a61 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1508,7 +1508,7 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
return 1;
}
- printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
+ pr_debug("%s: empty DMA table?\n", drive->name);
return 0; /* revert to PIO for this request */
}
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index c9a1349..550aa95 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -163,7 +163,7 @@ static int qd_find_disk_type (ide_drive_t *drive,
for (p = qd65xx_timing ; p->offset != -1 ; p++) {
if (!strncmp(p->model, model+p->offset, 4)) {
- printk(KERN_DEBUG "%s: listed !\n", drive->name);
+ pr_debug("%s: listed !\n", drive->name);
*active_time = p->active;
*recovery_time = p->recovery;
return 1;
@@ -183,7 +183,7 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing)
drive->drive_data &= 0xff00;
drive->drive_data |= timing;
- printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
+ pr_debug("%s: %#x\n", drive->name, timing);
}
static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -378,8 +378,7 @@ static int __init qd_probe(int base)
}
printk(KERN_NOTICE "qd6500 at %#x\n", base);
- printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
- config, QD_ID3);
+ pr_debug("qd6500: config=%#x, ID3=%u\n", config, QD_ID3);
d.port_ops = &qd6500_port_ops;
d.host_flags |= IDE_HFLAG_SINGLE;
@@ -392,8 +391,8 @@ static int __init qd_probe(int base)
control = inb(QD_CONTROL_PORT);
printk(KERN_NOTICE "qd6580 at %#x\n", base);
- printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
- config, control, QD_ID3);
+ pr_debug("qd6580: config=%#x, control=%#x, ID3=%u\n",
+ config, control, QD_ID3);
outb(QD_DEF_CONTR, QD_CONTROL_PORT);
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c
index b6554ef..28e6083 100644
--- a/drivers/ide/serverworks.c
+++ b/drivers/ide/serverworks.c
@@ -191,8 +191,8 @@ static int init_chipset_svwks(struct pci_dev *dev)
pci_read_config_dword(isa_dev, 0x64, ®);
reg &= ~0x00002000; /* disable 600ns interrupt mask */
if(!(reg & 0x00004000))
- printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
- "enabled.\n", pci_name(dev));
+ pr_debug(DRV_NAME " %s: UDMA not BIOS enabled.\n",
+ pci_name(dev));
reg |= 0x00004000; /* enable UDMA/33 support */
pci_write_config_dword(isa_dev, 0x64, reg);
}
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index b0a4606..21df560 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -89,9 +89,9 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
pci_write_config_word(dev, reg, drv_ctrl);
pci_read_config_word (dev, reg, &drv_ctrl);
- printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0),
- ide_pio_cycle_time(drive, pio), drv_ctrl);
+ pr_debug("%s: selected %s (%dns) (%04X)\n", drive->name,
+ ide_xfer_verbose(pio + XFER_PIO_0),
+ ide_pio_cycle_time(drive, pio), drv_ctrl);
}
/*
--
1.6.3.1.10.g659a0.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists