Linux version 2.6.30-rc7.SMP.K8-64-test3-dirty (root@secdev) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #28 SMP Tue Jun 2 14:06:09 PDT 2009 Command line: BOOT_IMAGE=new ro root=803 console=ttyS1,9600n8 console=tty1 quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7ff0000 (usable) BIOS-e820: 00000000d7ff0000 - 00000000d7ffe000 (ACPI data) BIOS-e820: 00000000d7ffe000 - 00000000d8000000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 0000000100000000 - 0000001028000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x1028000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 base 0000D0000000 mask FFFFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000001028000000 aka 66176M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xd7ff0 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000d7ff0000 Using GB pages for direct mapping 0000000000 - 00c0000000 page 1G 00c0000000 - 00d7e00000 page 2M 00d7e00000 - 00d7ff0000 page 4k kernel direct mapping tables up to d7ff0000 @ 10000-13000 init_memory_mapping: 0000000100000000-0000001028000000 Using GB pages for direct mapping 0100000000 - 1000000000 page 1G 1000000000 - 1028000000 page 2M kernel direct mapping tables up to 1028000000 @ 12000-14000 ACPI: RSDP 00000000000f9af0 00024 (v02 ACPIAM) ACPI: XSDT 00000000d7ff0100 0003C (v01 100108 XSDT0856 20081001 MSFT 00000097) ACPI: FACP 00000000d7ff0290 000F4 (v03 100108 FACP0856 20081001 MSFT 00000097) ACPI: DSDT 00000000d7ff0470 04D4E (v01 0AAAA 0AAAA000 00000000 INTL 20051117) ACPI: FACS 00000000d7ffe000 00040 ACPI: MCFG 00000000d7ff0430 0003C (v01 100108 OEMMCFG 20081001 MSFT 00000097) ACPI: HPET 00000000d7ff51c0 00038 (v01 100108 OEMHPET0 20081001 MSFT 00000097) Scanning NUMA topology in Northbridge 24 Number of nodes 2 Node 0 MemBase 0000000000000000 Limit 0000000828000000 Node 1 MemBase 0000000828000000 Limit 0000001028000000 NUMA: Allocated memnodemap from 13000 - 13440 NUMA: Using 27 for the hash shift. Using node hash shift of 27 found SMP MP-table at [ffff8800000ff780] ff780 Intel MultiProcessor Specification v1.1 MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: ETEMPLATE MPTABLE: APIC at: 0xFEE00000 Bootmem setup node 0 0000000000000000-0000000828000000 NODE_DATA [0000000000013440 - 000000000001543f] bootmap [00000000009b8000 - 0000000000abcfff] pages 105 (8 early reservations) ==> bootmem [0000000000 - 0828000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 00009b65e4] TEXT DATA BSS ==> [0000200000 - 00009b65e4] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [00009b7000 - 00009b7168] BRK ==> [00009b7000 - 00009b7168] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] #7 [0000013000 - 0000013440] MEMNODEMAP ==> [0000013000 - 0000013440] Bootmem setup node 1 0000000828000000-0000001028000000 NODE_DATA [0000000828000000 - 0000000828001fff] bootmap [0000000828002000 - 0000000828101fff] pages 100 (8 early reservations) ==> bootmem [0828000000 - 1028000000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0000200000 - 00009b65e4] TEXT DATA BSS #3 [000009fc00 - 0000100000] BIOS reserved #4 [00009b7000 - 00009b7168] BRK #5 [0000010000 - 0000012000] PGTABLE #6 [0000012000 - 0000013000] PGTABLE #7 [0000013000 - 0000013440] MEMNODEMAP found SMP MP-table at [ffff8800000ff780] ff780 [ffffe2001c8c0000-ffffe2001c9fffff] potential offnode page_structs [ffffe20000000000-ffffe2001c9fffff] PMD -> [ffff880028200000-ffff8800443fffff] on node 0 [ffffe2001ca00000-ffffe200389fffff] PMD -> [ffff880828200000-ffff8808441fffff] on node 1 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x01028000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000d7ff0 0: 0x00100000 -> 0x00828000 1: 0x00828000 -> 0x01028000 On node 0 totalpages: 8388479 DMA zone: 56 pages used for memmap DMA zone: 2076 pages reserved DMA zone: 1851 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 866344 pages, LIFO batch:31 Normal zone: 102592 pages used for memmap Normal zone: 7401280 pages, LIFO batch:31 On node 1 totalpages: 8388608 Normal zone: 114688 pages used for memmap Normal zone: 8273920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x2008 ACPI: No APIC-table, disabling MPS ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 16 Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:2 PERCPU: Embedded 22 pages at ffff880028035000, static data 69216 bytes Built 2 zonelists in Zone order, mobility grouping on. Total pages: 16543395 Policy zone: Normal Kernel command line: BOOT_IMAGE=new ro root=803 console=ttyS1,9600n8 console=tty1 quiet Initializing CPU#0 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2300.478 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty1] enabled console [ttyS1] enabled Checking aperture... No AGP bridge found Node 0: aperture @ d8000000 size 128 MB Node 1: aperture @ d8000000 size 128 MB Memory: 66180380k/67764224k available (4081k kernel code, 655876k absent, 927968k reserved, 1867k data, 400k init) hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.95 BogoMIPS (lpj=9201900) Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using C1E aware idle routine SMP alternatives: switching to UP code Freeing SMP alternatives: 36k freed ACPI: Core revision 20090320 ACPI: setting ELCR to 0200 (from 0ca0) Setting APIC routing to flat weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Setting APIC routing to flat SMP disabled Brought up 1 CPUs Total of 1 processors activated (4600.95 BogoMIPS). net_namespace: 1352 bytes xor: automatically using best checksumming function: generic_sse generic_sse: 9153.000 MB/sec xor: using function: generic_sse (9153.000 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000d8000000 aka 3456M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, fec0ffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d8000000, dfffffff] TOM2: 0000001028000000 aka 66176M bus: [00,07] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [f0000000, ffffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [d8000000, dfffffff] bus: 00 index 4 mmio: [1028000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2f7f] pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10 32bit mmio: [0xfe8fac00-0xfe8facff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:05.0: reg 10 io port: [0xb480-0xb487] pci 0000:00:05.0: reg 14 io port: [0xb400-0xb403] pci 0000:00:05.0: reg 18 io port: [0xb080-0xb087] pci 0000:00:05.0: reg 1c io port: [0xb000-0xb003] pci 0000:00:05.0: reg 20 io port: [0xac00-0xac0f] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe8f9000-0xfe8f9fff] pci 0000:00:05.1: reg 10 io port: [0xa880-0xa887] pci 0000:00:05.1: reg 14 io port: [0xa800-0xa803] pci 0000:00:05.1: reg 18 io port: [0xa480-0xa487] pci 0000:00:05.1: reg 1c io port: [0xa400-0xa403] pci 0000:00:05.1: reg 20 io port: [0xa080-0xa08f] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe8f8000-0xfe8f8fff] pci 0000:00:05.2: reg 10 io port: [0xa000-0xa007] pci 0000:00:05.2: reg 14 io port: [0x9c00-0x9c03] pci 0000:00:05.2: reg 18 io port: [0x9880-0x9887] pci 0000:00:05.2: reg 1c io port: [0x9800-0x9803] pci 0000:00:05.2: reg 20 io port: [0x9480-0x948f] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe8f7000-0xfe8f7fff] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe8f6000-0xfe8f6fff] pci 0000:00:08.0: reg 14 io port: [0x9400-0x9407] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe8fa800-0xfe8fa8ff] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe8fa400-0xfe8fa40f] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: reg 10 32bit mmio: [0xfe8f5000-0xfe8f5fff] pci 0000:00:09.0: reg 14 io port: [0x9080-0x9087] pci 0000:00:09.0: reg 18 32bit mmio: [0xfe8fa000-0xfe8fa0ff] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe8f4c00-0xfe8f4c0f] pci 0000:00:09.0: supports D1 D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0f.0: PME# disabled pci 0000:01:07.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:07.0: reg 14 io port: [0xc000-0xc0ff] pci 0000:01:07.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff] pci 0000:01:07.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff] pci 0000:01:07.0: supports D1 D2 pci 0000:00:06.0: transparent bridge pci 0000:00:06.0: bridge io port: [0xc000-0xcfff] pci 0000:00:06.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:00:06.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: supports D1 pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:07:00.0: PME# supported from D0 D3hot D3cold pci 0000:07:00.0: PME# disabled pci 0000:00:0f.0: bridge io port: [0xd000-0xefff] pci 0000:00:0f.0: bridge 32bit mmio: [0xfea00000-0xfebfffff] pci 0000:08:02.0: PME# supported from D0 D3hot D3cold pci 0000:08:02.0: PME# disabled pci 0000:08:04.0: PME# supported from D0 D3hot D3cold pci 0000:08:04.0: PME# disabled pci 0000:07:00.0: bridge io port: [0xd000-0xefff] pci 0000:07:00.0: bridge 32bit mmio: [0xfea00000-0xfebfffff] pci 0000:09:00.0: reg 10 32bit mmio: [0xfeae0000-0xfeafffff] pci 0000:09:00.0: reg 14 32bit mmio: [0xfeac0000-0xfeadffff] pci 0000:09:00.0: reg 18 io port: [0xdc00-0xdc1f] pci 0000:09:00.0: reg 30 32bit mmio: [0xfeaa0000-0xfeabffff] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:09:00.1: reg 10 32bit mmio: [0xfea80000-0xfea9ffff] pci 0000:09:00.1: reg 14 32bit mmio: [0xfea60000-0xfea7ffff] pci 0000:09:00.1: reg 18 io port: [0xd880-0xd89f] pci 0000:09:00.1: reg 30 32bit mmio: [0xfea40000-0xfea5ffff] pci 0000:09:00.1: PME# supported from D0 D3hot D3cold pci 0000:09:00.1: PME# disabled pci 0000:08:02.0: bridge io port: [0xd000-0xdfff] pci 0000:08:02.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:0a:00.0: reg 10 32bit mmio: [0xfebe0000-0xfebfffff] pci 0000:0a:00.0: reg 14 32bit mmio: [0xfebc0000-0xfebdffff] pci 0000:0a:00.0: reg 18 io port: [0xec00-0xec1f] pci 0000:0a:00.0: reg 30 32bit mmio: [0xfeba0000-0xfebbffff] pci 0000:0a:00.0: PME# supported from D0 D3hot pci 0000:0a:00.0: PME# disabled pci 0000:0a:00.1: reg 10 32bit mmio: [0xfeb80000-0xfeb9ffff] pci 0000:0a:00.1: reg 14 32bit mmio: [0xfeb60000-0xfeb7ffff] pci 0000:0a:00.1: reg 18 io port: [0xe880-0xe89f] pci 0000:0a:00.1: reg 30 32bit mmio: [0xfeb40000-0xfeb5ffff] pci 0000:0a:00.1: PME# supported from D0 D3hot pci 0000:0a:00.1: PME# disabled pci 0000:08:04.0: bridge io port: [0xe000-0xefff] pci 0000:08:04.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11 14) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 5 *7 10 11 14) ACPI: PCI Interrupt Link [LNEB] (IRQs *5 7 10 11 14) ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 *11 14) ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 *10 11 14) ACPI: PCI Interrupt Link [LUB0] (IRQs 5 7 *10 11 14) ACPI: PCI Interrupt Link [LMAD] (IRQs 5 7 10 *11 14) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 *10 11 14) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 *10 11 14) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 *11 14) ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 10 11 14) ACPI: PCI Interrupt Link [LSA0] (IRQs 5 10 *11 14) ACPI: PCI Interrupt Link [LSA1] (IRQs *5 10 11 14) ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 5 *10 11 14) SCSI subsystem initialized libata version 3.00 loaded. raid6: int64x1 2193 MB/s raid6: int64x2 2997 MB/s raid6: int64x4 3054 MB/s raid6: int64x8 1805 MB/s raid6: sse2x1 3041 MB/s raid6: sse2x2 5193 MB/s raid6: sse2x4 5916 MB/s raid6: using algorithm sse2x4 (5916 MB/s) PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ d8000000 size 131072 KB init_memory_mapping: 00000000d8000000-00000000e0000000 00d8000000 - 00e0000000 page 2M PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture pnp: PnP ACPI init ACPI: bus type pnp registered Switched to high resolution mode on CPU 0 pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x80f has been reserved system 00:08: ioport range 0x2000-0x207f has been reserved system 00:08: ioport range 0x2080-0x20ff has been reserved system 00:08: ioport range 0x2400-0x247f has been reserved system 00:08: ioport range 0x2480-0x24ff has been reserved system 00:08: ioport range 0x2800-0x287f has been reserved system 00:08: ioport range 0x2880-0x28ff has been reserved system 00:08: ioport range 0x2c00-0x2c7f has been reserved system 00:08: ioport range 0x2c80-0x2cff has been reserved system 00:08: iomem range 0xfe880000-0xfe8bffff has been reserved system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved system 00:0a: ioport range 0xca0-0xcaf has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0d: ioport range 0xa00-0xa7f has been reserved system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0xc0000-0xcffff has been reserved system 00:0f: iomem range 0xe0000-0xfffff could not be reserved system 00:0f: iomem range 0x100000-0xd7ffffff could not be reserved system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 pci 0000:00:06.0: IO window: 0xc000-0xcfff pci 0000:00:06.0: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:06.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: disabled pci 0000:00:0a.0: MEM window: disabled pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 pci 0000:03:00.0: IO window: disabled pci 0000:03:00.0: MEM window: disabled pci 0000:03:00.0: PREFETCH window: disabled pci 0000:03:00.1: PCI bridge, secondary bus 0000:05 pci 0000:03:00.1: IO window: disabled pci 0000:03:00.1: MEM window: disabled pci 0000:03:00.1: PREFETCH window: disabled pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0d.0: IO window: disabled pci 0000:00:0d.0: MEM window: disabled pci 0000:00:0d.0: PREFETCH window: disabled pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:0e.0: IO window: disabled pci 0000:00:0e.0: MEM window: disabled pci 0000:00:0e.0: PREFETCH window: disabled pci 0000:08:02.0: PCI bridge, secondary bus 0000:09 pci 0000:08:02.0: IO window: 0xd000-0xdfff pci 0000:08:02.0: MEM window: 0xfea00000-0xfeafffff pci 0000:08:02.0: PREFETCH window: disabled pci 0000:08:04.0: PCI bridge, secondary bus 0000:0a pci 0000:08:04.0: IO window: 0xe000-0xefff pci 0000:08:04.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:08:04.0: PREFETCH window: disabled pci 0000:07:00.0: PCI bridge, secondary bus 0000:08 pci 0000:07:00.0: IO window: 0xd000-0xefff pci 0000:07:00.0: MEM window: 0xfea00000-0xfebfffff pci 0000:07:00.0: PREFETCH window: disabled pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07 pci 0000:00:0f.0: IO window: 0xd000-0xefff pci 0000:00:0f.0: MEM window: 0xfea00000-0xfebfffff pci 0000:00:0f.0: PREFETCH window: disabled pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:0a.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:03:00.0: setting latency timer to 64 pci 0000:03:00.1: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci 0000:00:0f.0: setting latency timer to 64 pci 0000:07:00.0: setting latency timer to 64 pci 0000:08:02.0: setting latency timer to 64 pci 0000:08:04.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:07: resource 0 io: [0xd000-0xefff] pci_bus 0000:07: resource 1 mem: [0xfea00000-0xfebfffff] pci_bus 0000:08: resource 0 io: [0xd000-0xefff] pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfebfffff] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] pci_bus 0000:09: resource 1 mem: [0xfea00000-0xfeafffff] pci_bus 0000:0a: resource 0 io: [0xe000-0xefff] pci_bus 0000:0a: resource 1 mem: [0xfeb00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 NTFS driver 2.1.29 [Flags: R/W]. SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 32768 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) async_tx: api initialized (sync-only) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:01:07.0: Boot video device pcieport-driver 0000:00:0a.0: irq 16 for MSI/MSI-X pcieport-driver 0000:00:0a.0: setting latency timer to 64 pcieport-driver 0000:00:0d.0: irq 17 for MSI/MSI-X pcieport-driver 0000:00:0d.0: setting latency timer to 64 pcieport-driver 0000:00:0e.0: irq 18 for MSI/MSI-X pcieport-driver 0000:00:0e.0: setting latency timer to 64 pcieport-driver 0000:00:0f.0: irq 19 for MSI/MSI-X pcieport-driver 0000:00:0f.0: setting latency timer to 64 pcieport-driver 0000:07:00.0: setting latency timer to 64 pcieport-driver 0000:08:02.0: irq 20 for MSI/MSI-X pcieport-driver 0000:08:02.0: setting latency timer to 64 pcieport-driver 0000:08:04.0: irq 21 for MSI/MSI-X pcieport-driver 0000:08:04.0: setting latency timer to 64 aer 0000:00:0a.0:pcie02: service driver aer loaded aer 0000:00:0d.0:pcie02: service driver aer loaded aer 0000:00:0e.0:pcie02: service driver aer loaded aer 0000:00:0f.0:pcie02: service driver aer loaded aer 0000:08:02.0:pcie22: service driver aer loaded aer 0000:08:04.0:pcie22: service driver aer loaded lp: driver loaded but no devices found Real Time Clock Driver v1.12b Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded nbd: registered device at major 43 Adaptec aacraid driver 1.1-5[2461]-ms QLogic Fibre Channel HBA Driver: 8.03.01-k1 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. st: Version 20081215, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods SCSI Media Changer driver v0.25 Driver 'ch' needs updating - please use bus_type methods sata_nv 0000:00:05.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 11 (level, low) -> IRQ 11 sata_nv 0000:00:05.0: Using SWNCQ mode sata_nv 0000:00:05.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 11 ata2: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 11 ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 5 (level, low) -> IRQ 5 sata_nv 0000:00:05.1: Using SWNCQ mode sata_nv 0000:00:05.1: setting latency timer to 64 ata1: hard resetting link ata1: nv: skipping hardreset on occupied port scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 5 ata4: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 5 ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 10 (level, low) -> IRQ 10 sata_nv 0000:00:05.2: Using SWNCQ mode sata_nv 0000:00:05.2: setting latency timer to 64 ata3: hard resetting link ata3: nv: skipping hardreset on occupied port ata3: SATA link down (SStatus 0 SControl 300) ata3: EH complete scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 10 ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 10 ata5: hard resetting link ata5: nv: skipping hardreset on occupied port ata5: SATA link down (SStatus 0 SControl 300) ata5: EH complete pata_amd 0000:00:04.0: version 0.4.1 pata_amd 0000:00:04.0: setting latency timer to 64 scsi6 : pata_amd scsi7 : pata_amd ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. ata7: soft resetting link e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered e1000e 0000:09:00.0: PCI INT B -> Link[LNEA] -> GSI 7 (level, low) -> IRQ 7 e1000e 0000:09:00.0: setting latency timer to 64 e1000e 0000:09:00.0: irq 22 for MSI/MSI-X ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST31000340NS, RS03, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA ST31000340NS RS03 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 ata2: hard resetting link ata2: nv: skipping hardreset on occupied port sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk 0000:09:00.0: eth0: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9d 0000:09:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:09:00.0: eth0: MAC: 0, PHY: 4, PBA No: d64202-004 ACPI: PCI Interrupt Link [LNED] enabled at IRQ 10 e1000e 0000:09:00.1: PCI INT A -> Link[LNED] -> GSI 10 (level, low) -> IRQ 10 e1000e 0000:09:00.1: setting latency timer to 64 e1000e 0000:09:00.1: irq 23 for MSI/MSI-X ata7.00: ATAPI: TEAC DV-W28E-R, 1.0A, max UDMA/33 ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11) ata7.00: configured for UDMA/33 ata7: EH complete ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: SSDSA2SH032G1GN INTEL, 045C8621, max UDMA/133 ata2.00: 62500000 sectors, multi 16: LBA48 NCQ (depth 31) ata2.00: configured for UDMA/133 ata2: EH complete scsi 1:0:0:0: Direct-Access ATA SSDSA2SH032G1GN 045C PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 62500000 512-byte hardware sectors: (32.0 GB/29.8 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<5>sd 1:0:0:0: Attached scsi generic sg1 type 0 ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link down (SStatus 0 SControl 300) ata4: EH complete ata6: hard resetting link ata6: nv: skipping hardreset on occupied port ata6: SATA link down (SStatus 0 SControl 300) ata6: EH complete unknown partition table sd 1:0:0:0: [sdb] Attached SCSI disk 0000:09:00.1: eth1: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9c 0000:09:00.1: eth1: Intel(R) PRO/1000 Network Connection 0000:09:00.1: eth1: MAC: 0, PHY: 4, PBA No: d64202-004 ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 11 e1000e 0000:0a:00.0: PCI INT B -> Link[LNEC] -> GSI 11 (level, low) -> IRQ 11 e1000e 0000:0a:00.0: setting latency timer to 64 e1000e 0000:0a:00.0: irq 24 for MSI/MSI-X scsi 6:0:0:0: CD-ROM TEAC DV-W28E-R 1.0A PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg2 type 5 ata8: port disabled. ignoring. ata8: EH complete 0000:0a:00.0: eth2: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9f 0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection 0000:0a:00.0: eth2: MAC: 0, PHY: 4, PBA No: d64202-004 ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 5 e1000e 0000:0a:00.1: PCI INT A -> Link[LNEB] -> GSI 5 (level, low) -> IRQ 5 e1000e 0000:0a:00.1: setting latency timer to 64 e1000e 0000:0a:00.1: irq 25 for MSI/MSI-X 0000:0a:00.1: eth3: (PCI Express:2.5GB/s:Width x4) 00:15:17:91:3e:9e 0000:0a:00.1: eth3: Intel(R) PRO/1000 Network Connection 0000:0a:00.1: eth3: MAC: 0, PHY: 4, PBA No: d64202-004 Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10 forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 10 (level, low) -> IRQ 10 forcedeth 0000:00:08.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:08.0: ifname eth4, PHY OUI 0x5043 @ 16, addr 00:e0:81:4d:95:aa forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 11 forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 11 (level, low) -> IRQ 11 forcedeth 0000:00:09.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:09.0: ifname eth5, PHY OUI 0x5043 @ 17, addr 00:e0:81:4d:95:ab forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 Fusion MPT FC Host driver 3.04.07 Fusion MPT SAS Host driver 3.04.07 Fusion MPT misc device (ioctl) driver 3.04.07 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 input: AT Translated Set 2 keyboard as /class/input/input1 i2c-adapter i2c-1: Found a DME1737 chip at 0x2c (rev 0x8a). dme1737 1-002c: Optional features: pwm3=no, pwm5=no, pwm6=no, fan3=no, fan4=no, fan5=no, fan6=no. hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder cpuidle: using governor menu oprofile: AMD IBS detected oprofile: using NMI interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ctnetlink v0.93: registering with nfnetlink. NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. UDF-fs: No partition found (1) XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly on device 8:3. Freeing unused kernel memory: 400k freed Adding 2048276k swap on /dev/sda1. Priority:-1 extents:1 across:2048276k XFS mounting filesystem sda4 Ending clean XFS mount for filesystem: sda4 forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X eth4: no link during initialization. warning: `ntpd' uses 32-bit capabilities (legacy support in use)