linux-kernel - Re: [PATCH 2/2] at91/USB: at91sam9g45 series USB host integration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 19 Jun 2009 00:43:00 -0700
From:	David Brownell <david-b@...bell.net>
To:	Nicolas Ferre <nicolas.ferre@...el.com>
Cc:	linux-usb@...r.kernel.org, avictor.za@...il.com,
	linux-kernel@...r.kernel.org, haavard.skinnemoen@...el.com,
	patrice.vilchez@...el.com
Subject: Re: [PATCH 2/2] at91/USB: at91sam9g45 series USB host integration

On Tuesday 09 June 2009, Nicolas Ferre wrote:
> This is the at91 specific part of USB host integration. The EHCI high speed
> controller has a companion OHCI controller to manage USB full and low speed.
> They are sharing the same IRQ line and vbus pin.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>

My only issue here is with the GPIO stuff; see below.


> ---
>  arch/arm/mach-at91/at91sam9g45_devices.c |   56 ++++++++++++++++++++++++++++++
>  arch/arm/mach-at91/board-sam9m10g45ek.c  |    1 +
>  arch/arm/mach-at91/include/mach/board.h  |    1 +
>  3 files changed, 58 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
> index d746e86..c2ecbb6 100644
> --- a/arch/arm/mach-at91/at91sam9g45_devices.c
> +++ b/arch/arm/mach-at91/at91sam9g45_devices.c
> @@ -83,6 +83,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
>  
>  
>  /* --------------------------------------------------------------------
> + *  USB Host HS (EHCI)
> + *  Needs an OHCI host for low and full speed management
> + * -------------------------------------------------------------------- */
> +
> +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
> +static u64 ehci_dmamask = DMA_BIT_MASK(32);
> +static struct at91_usbh_data usbh_ehci_data;
> +
> +static struct resource usbh_ehci_resources[] = {
> +	[0] = {
> +		.start	= AT91SAM9G45_EHCI_BASE,
> +		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[1] = {
> +		.start	= AT91SAM9G45_ID_UHPHS,
> +		.end	= AT91SAM9G45_ID_UHPHS,
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +};
> +
> +static struct platform_device at91_usbh_ehci_device = {
> +	.name		= "atmel-ehci",
> +	.id		= -1,
> +	.dev		= {
> +				.dma_mask		= &ehci_dmamask,
> +				.coherent_dma_mask	= DMA_BIT_MASK(32),
> +				.platform_data		= &usbh_ehci_data,
> +	},
> +	.resource	= usbh_ehci_resources,
> +	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
> +};
> +
> +void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
> +{
> +	int i;
> +
> +	if (!data)
> +		return;
> +
> +	/* Enable VBus control for UHP ports */
> +	for (i = 0; i < data->ports; i++) {
> +		if (data->vbus_pin[i])
> +			at91_set_gpio_output(data->vbus_pin[i], 0);

This should gpio_request() and gpio_direction_output().

Don't use AT91-specific GPIO calls except for things that
the generic calls don't support ... like enabling open-drain
outputs, the deglitching support, or input pullups.


> +	}
> +
> +	usbh_ehci_data = *data;
> +	at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
> +	platform_device_register(&at91_usbh_ehci_device);
> +}
> +#else
> +void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
> +#endif
> +
> +
> +/* --------------------------------------------------------------------
>   *  USB HS Device (Gadget)
>   * -------------------------------------------------------------------- */
>  
> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index b8558ea..d7251b7 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -358,6 +358,7 @@ static void __init ek_board_init(void)
>  	at91_add_device_serial();
>  	/* USB HS Host */
>  	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
> +	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
>  	/* USB HS Device */
>  	at91_add_device_usba(&ek_usba_udc_data);
>  	/* SPI */
> diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
> index 74801d2..13640b0 100644
> --- a/arch/arm/mach-at91/include/mach/board.h
> +++ b/arch/arm/mach-at91/include/mach/board.h
> @@ -92,6 +92,7 @@ struct at91_usbh_data {
>  };
>  extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
>  extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
> +extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
>  
>   /* NAND / SmartMedia */
>  struct atmel_nand_data {
> -- 
> 1.5.3.7
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/