| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 26 Jun 2009 08:48:10 +0530
From: Jaswinder Singh Rajput <jaswinder@...nel.org>
To: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Cc: David Miller <davem@...emloft.net>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] IDE: ide-taskfile.c fix compilation warning and cleanup
On Mon, 2009-06-22 at 12:50 +0200, Bartlomiej Zolnierkiewicz wrote:
> On Monday 22 June 2009 08:09:33 Jaswinder Singh Rajput wrote:
>
> > @@ -248,8 +250,9 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd,
> > page = nth_page(page, (offset >> PAGE_SHIFT));
> > offset %= PAGE_SIZE;
> >
> > - if (PageHighMem(page))
> > - local_irq_save(flags);
> > +#ifdef CONFIG_HIGHMEM
> > + local_irq_save(flags);
> > +#endif
> >
> > buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset;
> >
> > @@ -269,8 +272,9 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd,
> >
> > kunmap_atomic(buf, KM_BIO_SRC_IRQ);
> >
> > - if (PageHighMem(page))
> > - local_irq_restore(flags);
> > +#ifdef CONFIG_HIGHMEM
> > + local_irq_restore(flags);
> > +#endif
>
> This part is incorrect (adds a performance regression for low-mem pages
> w/ HIGHMEM=y) and seems to be accidental (nothing about it in the patch
> description).
>
> Besides I would suggest splitting the patch on fix and cleanup parts.
Here is the cleanup part:
[PATCH] IDE: ide-taskfile.c fix style problems
Fix trivial style problems:
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: space prohibited between function name and open parenthesis '('
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
ERROR: do not use C99 // comments X 2
ERROR: trailing statements should be on next line
ERROR: trailing whitespace
ERROR: switch and case should be at the same indent
WARNING: line over 80 characters
total: 5 errors, 4 warnings
Also removed dead code
Also used pr_err() to avoid line breaks
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@...il.com>
---
drivers/ide/ide-taskfile.c | 109 ++++++++++++++++++++-----------------------
1 files changed, 51 insertions(+), 58 deletions(-)
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 75b85a8..ed512a8 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -19,8 +19,8 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/io.h>
void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd)
@@ -53,7 +53,7 @@ void ide_tf_dump(const char *s, struct ide_cmd *cmd)
#endif
}
-int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
+int taskfile_lib_get_identify(ide_drive_t *drive, u8 *buf)
{
struct ide_cmd cmd;
@@ -86,7 +86,7 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd)
if (orig_cmd->protocol == ATA_PROT_PIO &&
(orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) &&
drive->mult_count == 0) {
- printk(KERN_ERR "%s: multimode not set!\n", drive->name);
+ pr_err("%s: multimode not set!\n", drive->name);
return ide_stopped;
}
@@ -214,7 +214,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
}
if (stat & ATA_BUSY)
- printk(KERN_ERR "%s: drive still BUSY!\n", drive->name);
+ pr_err("%s: drive still BUSY!\n", drive->name);
return stat;
}
@@ -398,8 +398,7 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive,
if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
- printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
- drive->name,
+ pr_err("%s: no DRQ after issuing %sWRITE%s\n", drive->name,
(cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "",
(drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
return startstop;
@@ -449,7 +448,6 @@ put_req:
blk_put_request(rq);
return error;
}
-
EXPORT_SYMBOL(ide_raw_taskfile);
int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd)
@@ -475,10 +473,9 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
u16 nsect = 0;
char __user *buf = (char __user *)arg;
-// printk("IDE Taskfile ...\n");
-
req_task = kzalloc(tasksize, GFP_KERNEL);
- if (req_task == NULL) return -ENOMEM;
+ if (req_task == NULL)
+ return -ENOMEM;
if (copy_from_user(req_task, buf, tasksize)) {
kfree(req_task);
return -EFAULT;
@@ -486,7 +483,7 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
taskout = req_task->out_size;
taskin = req_task->in_size;
-
+
if (taskin > 65536 || taskout > 65536) {
err = -EINVAL;
goto abort;
@@ -576,51 +573,49 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
cmd.protocol = ATA_PROT_DMA;
switch (req_task->data_phase) {
- case TASKFILE_MULTI_OUT:
- if (!drive->mult_count) {
- /* (hs): give up if multcount is not set */
- printk(KERN_ERR "%s: %s Multimode Write " \
- "multcount is not set\n",
- drive->name, __func__);
- err = -EPERM;
- goto abort;
- }
- cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
- /* fall through */
- case TASKFILE_OUT:
- cmd.protocol = ATA_PROT_PIO;
- /* fall through */
- case TASKFILE_OUT_DMAQ:
- case TASKFILE_OUT_DMA:
- cmd.tf_flags |= IDE_TFLAG_WRITE;
- nsect = taskout / SECTOR_SIZE;
- data_buf = outbuf;
- break;
- case TASKFILE_MULTI_IN:
- if (!drive->mult_count) {
- /* (hs): give up if multcount is not set */
- printk(KERN_ERR "%s: %s Multimode Read failure " \
- "multcount is not set\n",
- drive->name, __func__);
- err = -EPERM;
- goto abort;
- }
- cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
- /* fall through */
- case TASKFILE_IN:
- cmd.protocol = ATA_PROT_PIO;
- /* fall through */
- case TASKFILE_IN_DMAQ:
- case TASKFILE_IN_DMA:
- nsect = taskin / SECTOR_SIZE;
- data_buf = inbuf;
- break;
- case TASKFILE_NO_DATA:
- cmd.protocol = ATA_PROT_NODATA;
- break;
- default:
- err = -EFAULT;
+ case TASKFILE_MULTI_OUT:
+ if (!drive->mult_count) {
+ /* (hs): give up if multcount is not set */
+ pr_err("%s: %s Multimode Write multcount is not set\n",
+ drive->name, __func__);
+ err = -EPERM;
+ goto abort;
+ }
+ cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
+ /* fall through */
+ case TASKFILE_OUT:
+ cmd.protocol = ATA_PROT_PIO;
+ /* fall through */
+ case TASKFILE_OUT_DMAQ:
+ case TASKFILE_OUT_DMA:
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
+ nsect = taskout / SECTOR_SIZE;
+ data_buf = outbuf;
+ break;
+ case TASKFILE_MULTI_IN:
+ if (!drive->mult_count) {
+ /* (hs): give up if multcount is not set */
+ pr_err("%s: %s Multimode Read multcount is not set\n",
+ drive->name, __func__);
+ err = -EPERM;
goto abort;
+ }
+ cmd.tf_flags |= IDE_TFLAG_MULTI_PIO;
+ /* fall through */
+ case TASKFILE_IN:
+ cmd.protocol = ATA_PROT_PIO;
+ /* fall through */
+ case TASKFILE_IN_DMAQ:
+ case TASKFILE_IN_DMA:
+ nsect = taskin / SECTOR_SIZE;
+ data_buf = inbuf;
+ break;
+ case TASKFILE_NO_DATA:
+ cmd.protocol = ATA_PROT_NODATA;
+ break;
+ default:
+ err = -EFAULT;
+ goto abort;
}
if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA)
@@ -629,7 +624,7 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect;
if (!nsect) {
- printk(KERN_ERR "%s: in/out command without data\n",
+ pr_err("%s: in/out command without data\n",
drive->name);
err = -EFAULT;
goto abort;
@@ -671,8 +666,6 @@ abort:
kfree(outbuf);
kfree(inbuf);
-// printk("IDE Taskfile ioctl ended. rc = %i\n", err);
-
return err;
}
#endif
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists