[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc1-25446-g1ae8c0a-dirty (lex@zwerg) (gcc version 4.4.0 (Ubuntu 4.4.0-8ubuntu2) ) #2 SMP Mon Jul 6 06:30:36 CEST 2009 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd90e000 (usable) [ 0.000000] BIOS-e820: 00000000bd90e000 - 00000000bd930000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd930000 - 00000000bda48000 (reserved) [ 0.000000] BIOS-e820: 00000000bda48000 - 00000000bda5c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bda5c000 - 00000000bdb5b000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb5c000 - 00000000bdb64000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb6e000 - 00000000bdb8c000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb92000 - 00000000bdd00000 (usable) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0BDD00000 mask FFFF00000 write-through [ 0.000000] 2 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 13C000000 mask FFC000000 uncachable [ 0.000000] last_pfn = 0xbdd00 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bd90e000 (usable) [ 0.000000] modified: 00000000bd90e000 - 00000000bd930000 (ACPI NVS) [ 0.000000] modified: 00000000bd930000 - 00000000bda48000 (reserved) [ 0.000000] modified: 00000000bda48000 - 00000000bda5c000 (ACPI NVS) [ 0.000000] modified: 00000000bda5c000 - 00000000bdb5b000 (reserved) [ 0.000000] modified: 00000000bdb5b000 - 00000000bdb5c000 (ACPI NVS) [ 0.000000] modified: 00000000bdb5c000 - 00000000bdb64000 (ACPI data) [ 0.000000] modified: 00000000bdb64000 - 00000000bdb6e000 (ACPI NVS) [ 0.000000] modified: 00000000bdb6e000 - 00000000bdb8c000 (reserved) [ 0.000000] modified: 00000000bdb8c000 - 00000000bdb92000 (ACPI NVS) [ 0.000000] modified: 00000000bdb92000 - 00000000bdd00000 (usable) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdd00000 [ 0.000000] 0000000000 - 00bdc00000 page 2M [ 0.000000] 00bdc00000 - 00bdd00000 page 4k [ 0.000000] kernel direct mapping tables up to bdd00000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ b000-11000 [ 0.000000] RAMDISK: 37858000 - 37fefbe0 [ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000bdb62e18 0004C (v01 INTEL DG45ID 0000006B MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bdb61d98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! 20090521 tbfadt-370 [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BDB65F40/00000000BDB6BE40, using 32 20090521 tbfadt-487 [ 0.000000] ACPI: DSDT 00000000bdb5c018 0492F (v01 INTEL DG45ID 0000006B INTL 20051117) [ 0.000000] ACPI: FACS 00000000bdb65f40 00040 [ 0.000000] ACPI: APIC 00000000bdb61f18 0006C (v02 INTEL DG45ID 0000006B MSFT 00010013) [ 0.000000] ACPI: MCFG 00000000bdb6cd98 0003C (v01 INTEL DG45ID 0000006B MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000bdb6bc18 000A0 (v32 INTEL DG45ID 0000006B TFSM 000F4240) [ 0.000000] ACPI: HPET 00000000bdb6cd18 00038 (v01 INTEL DG45ID 0000006B AMI. 00000003) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 013c000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000184ec48] TEXT DATA BSS ==> [0001000000 - 000184ec48] [ 0.000000] #3 [0037858000 - 0037fefbe0] RAMDISK ==> [0037858000 - 0037fefbe0] [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #5 [000184f000 - 000184f1ec] BRK ==> [000184f000 - 000184f1ec] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bd90e [ 0.000000] 0: 0x000bdb92 -> 0x000bdd00 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1022485 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3833 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 758452 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd90e000 - 00000000bd930000 [ 0.000000] PM: Registered nosave memory: 00000000bd930000 - 00000000bda48000 [ 0.000000] PM: Registered nosave memory: 00000000bda48000 - 00000000bda5c000 [ 0.000000] PM: Registered nosave memory: 00000000bda5c000 - 00000000bdb5b000 [ 0.000000] PM: Registered nosave memory: 00000000bdb5b000 - 00000000bdb5c000 [ 0.000000] PM: Registered nosave memory: 00000000bdb5c000 - 00000000bdb64000 [ 0.000000] PM: Registered nosave memory: 00000000bdb64000 - 00000000bdb6e000 [ 0.000000] PM: Registered nosave memory: 00000000bdb6e000 - 00000000bdb8c000 [ 0.000000] PM: Registered nosave memory: 00000000bdb8c000 - 00000000bdb92000 [ 0.000000] PM: Registered nosave memory: 00000000bdd00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bdd00000 (gap: bdd00000:4101c000) [ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff880028022000, static data 82464 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1004685 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=UUID=0db19d83-143f-4a8d-8f62-0775623b62b1 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3942820k/5177344k available (4825k kernel code, 1087404k absent, 146184k reserved, 2464k data, 428k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.684 MHz processor. [ 0.001002] Console: colour VGA+ 80x25 [ 0.001004] console [tty0] enabled [ 0.004000] allocated 41943040 bytes of page_cgroup [ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.36 BogoMIPS (lpj=11998736) [ 0.004000] Security Framework initialized [ 0.004000] Smack: Initializing. [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU0: Thermal monitoring enabled (TM2) [ 0.004000] using mwait in idle threads. [ 0.004000] Performance Counters: Core2 events, Intel PMU driver. [ 0.004000] ... version: 2 [ 0.004000] ... bit width: 40 [ 0.004000] ... generic counters: 2 [ 0.004000] ... value mask: 000000ffffffffff [ 0.004000] ... max period: 000000007fffffff [ 0.004000] ... fixed-purpose counters: 3 [ 0.004000] ... counter mask: 0000000700000003 [ 0.004000] ACPI: Core revision 20090521 [ 0.005853] Setting APIC routing to flat [ 0.006172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.045868] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a [ 0.048001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5999.22 BogoMIPS (lpj=11998448) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.132656] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a [ 0.132663] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.136018] Brought up 2 CPUs [ 0.136020] Total of 2 processors activated (11998.59 BogoMIPS). [ 0.136062] CPU0 attaching sched-domain: [ 0.136064] domain 0: span 0-1 level MC [ 0.136066] groups: 0 1 [ 0.136069] CPU1 attaching sched-domain: [ 0.136070] domain 0: span 0-1 level MC [ 0.136071] groups: 1 0 [ 0.136125] regulator: core version 0.5 [ 0.136125] Time: 4:33:17 Date: 07/06/09 [ 0.136125] NET: Registered protocol family 16 [ 0.136125] ACPI: bus type pci registered [ 0.136125] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.136125] PCI: Not using MMCONFIG. [ 0.136125] PCI: Using configuration type 1 for base access [ 0.136125] bio: create slab at 0 [ 0.136401] ACPI: EC: Look up EC in DSDT [ 0.142862] ACPI: BIOS _OSI(Linux) query ignored [ 0.144357] ACPI: Interpreter enabled [ 0.144359] ACPI: (supports S0 S1 S3 S4 S5) [ 0.144374] ACPI: Using IOAPIC for interrupt routing [ 0.144462] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.144513] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.146905] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.149941] ACPI: No dock devices found. [ 0.149941] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.149941] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff] [ 0.149941] pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff] [ 0.149941] pci 0000:00:02.0: reg 20 io port: [0xf1c0-0xf1c7] [ 0.149941] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0400000-0xd04fffff] [ 0.149941] pci 0000:00:03.0: reg 10 64bit mmio: [0xd0526100-0xd052610f] [ 0.149941] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.149941] pci 0000:00:03.0: PME# disabled [ 0.149941] pci 0000:00:19.0: reg 10 32bit mmio: [0xd0500000-0xd051ffff] [ 0.149941] pci 0000:00:19.0: reg 14 32bit mmio: [0xd0524000-0xd0524fff] [ 0.149941] pci 0000:00:19.0: reg 18 io port: [0xf100-0xf11f] [ 0.149941] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.149941] pci 0000:00:19.0: PME# disabled [ 0.149941] pci 0000:00:1a.0: reg 20 io port: [0xf0e0-0xf0ff] [ 0.149941] pci 0000:00:1a.1: reg 20 io port: [0xf0c0-0xf0df] [ 0.149941] pci 0000:00:1a.2: reg 20 io port: [0xf0a0-0xf0bf] [ 0.149941] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0525c00-0xd0525fff] [ 0.149941] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.149941] pci 0000:00:1a.7: PME# disabled [ 0.149941] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0520000-0xd0523fff] [ 0.149941] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.149941] pci 0000:00:1b.0: PME# disabled [ 0.152033] pci 0000:00:1d.0: reg 20 io port: [0xf080-0xf09f] [ 0.152088] pci 0000:00:1d.1: reg 20 io port: [0xf060-0xf07f] [ 0.152142] pci 0000:00:1d.2: reg 20 io port: [0xf040-0xf05f] [ 0.152200] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0525800-0xd0525bff] [ 0.152244] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.152248] pci 0000:00:1d.7: PME# disabled [ 0.152345] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.152348] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.152351] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.152404] pci 0000:00:1f.2: reg 10 io port: [0xf1b0-0xf1b7] [ 0.152408] pci 0000:00:1f.2: reg 14 io port: [0xf1a0-0xf1a3] [ 0.152412] pci 0000:00:1f.2: reg 18 io port: [0xf190-0xf197] [ 0.152417] pci 0000:00:1f.2: reg 1c io port: [0xf180-0xf183] [ 0.152421] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f] [ 0.152425] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0525000-0xd05257ff] [ 0.152449] pci 0000:00:1f.2: PME# supported from D3hot [ 0.152451] pci 0000:00:1f.2: PME# disabled [ 0.152473] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd0526000-0xd05260ff] [ 0.152483] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.152518] pci 0000:00:1f.5: reg 10 io port: [0xf170-0xf177] [ 0.152522] pci 0000:00:1f.5: reg 14 io port: [0xf160-0xf163] [ 0.152526] pci 0000:00:1f.5: reg 18 io port: [0xf150-0xf157] [ 0.152531] pci 0000:00:1f.5: reg 1c io port: [0xf140-0xf143] [ 0.152535] pci 0000:00:1f.5: reg 20 io port: [0xf130-0xf13f] [ 0.152539] pci 0000:00:1f.5: reg 24 io port: [0xf120-0xf12f] [ 0.152601] pci 0000:00:1e.0: transparent bridge [ 0.152613] pci_bus 0000:00: on NUMA node 0 [ 0.152616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.152705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.156178] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.156178] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.156191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.156260] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.156330] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.156399] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.156468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.156537] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.156570] SCSI subsystem initialized [ 0.156570] libata version 3.00 loaded. [ 0.156570] usbcore: registered new interface driver usbfs [ 0.156570] usbcore: registered new interface driver hub [ 0.156570] usbcore: registered new device driver usb [ 0.156570] ACPI: WMI: Mapper loaded [ 0.156570] PCI: Using ACPI for IRQ routing [ 0.168037] NET: Registered protocol family 8 [ 0.168039] NET: Registered protocol family 20 [ 0.168052] NetLabel: Initializing [ 0.168052] NetLabel: domain hash size = 128 [ 0.168052] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.168052] NetLabel: unlabeled traffic allowed by default [ 0.168052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.168056] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.191969] pnp: PnP ACPI init [ 0.191977] ACPI: bus type pnp registered [ 0.193528] pnp: PnP ACPI: found 10 devices [ 0.193529] ACPI: ACPI bus type pnp unregistered [ 0.193537] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.193539] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.193541] system 00:01: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.193544] system 00:02: ioport range 0xa20-0xa3f has been reserved [ 0.193546] system 00:02: ioport range 0xa00-0xa1f has been reserved [ 0.193548] system 00:02: ioport range 0xb78-0xb7f has been reserved [ 0.193549] system 00:02: ioport range 0xf78-0xf7f has been reserved [ 0.193553] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.193557] system 00:08: ioport range 0x400-0x47f has been reserved [ 0.193558] system 00:08: ioport range 0x1180-0x119f has been reserved [ 0.193560] system 00:08: ioport range 0x500-0x57f could not be reserved [ 0.193562] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.193564] system 00:08: iomem range 0xfec00000-0xfecfffff has been reserved [ 0.193566] system 00:08: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.193567] system 00:08: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.193569] system 00:08: iomem range 0xff000000-0xffffffff has been reserved [ 0.198319] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.198320] pci 0000:00:1e.0: IO window: disabled [ 0.198324] pci 0000:00:1e.0: MEM window: disabled [ 0.198326] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.198335] pci 0000:00:1e.0: setting latency timer to 64 [ 0.198338] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.198339] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.198341] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.198342] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.198360] NET: Registered protocol family 2 [ 0.198412] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.198717] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.199854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.200194] TCP: Hash tables configured (established 262144 bind 65536) [ 0.200196] TCP reno registered [ 0.200262] NET: Registered protocol family 1 [ 0.200311] Trying to unpack rootfs image as initramfs... [ 0.319188] Freeing initrd memory: 7774k freed [ 0.321742] Machine check injector initialized [ 0.321807] Scanning for low memory corruption every 60 seconds [ 0.321964] audit: initializing netlink socket (disabled) [ 0.321976] type=2000 audit(1246854796.319:1): initialized [ 0.327781] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.329435] VFS: Disk quotas dquot_6.5.2 [ 0.329490] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.329958] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.330002] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.330036] fuse init (API version 7.11) [ 0.330134] msgmni has been set to 7717 [ 0.330290] alg: No test for stdrng (krng) [ 0.330357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.330359] io scheduler noop registered [ 0.330360] io scheduler anticipatory registered [ 0.330362] io scheduler deadline registered [ 0.330369] io scheduler cfq registered (default) [ 0.330378] pci 0000:00:02.0: Boot video device [ 0.500221] Switched to high resolution mode on CPU 1 [ 0.503534] Switched to high resolution mode on CPU 0 [ 1.928005] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.528006] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.528374] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.528376] ACPI: Power Button [PWRF] [ 3.528430] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 3.528436] ACPI: Power Button [PWRB] [ 3.528769] ACPI: SSDT 00000000bdb65c18 002CC (v01 AMI IST 00000001 MSFT 03000001) [ 3.529030] Marking TSC unstable due to TSC halts in idle [ 3.529060] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.529090] processor LNXCPU:00: registered as cooling_device0 [ 3.529264] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.529290] processor LNXCPU:01: registered as cooling_device1 [ 3.532213] Linux agpgart interface v0.103 [ 3.532223] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset [ 3.533481] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 3.536071] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 3.536152] [drm] Initialized drm 1.1.0 20060810 [ 3.536166] alloc irq_desc for 16 on node -1 [ 3.536167] alloc kstat_irqs on node -1 [ 3.536173] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.536175] i915 0000:00:02.0: setting latency timer to 64 [ 3.539613] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 3.539615] [drm] MTRR allocation failed. Graphics performance may suffer. [ 3.539626] alloc irq_desc for 24 on node -1 [ 3.539627] alloc kstat_irqs on node -1 [ 3.539632] i915 0000:00:02.0: irq 24 for MSI/MSI-X [ 3.544798] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B [ 3.555500] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [ 4.241074] [drm] TMDS-12: set mode 1920x1080 1f [ 4.310987] Console: switching to colour frame buffer device 240x67 [ 4.360889] [drm] fb0: inteldrmfb frame buffer device [ 4.360939] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD 20090521 video-1851 [ 4.360991] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:15/input/input2 [ 4.360995] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) [ 4.361027] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.362239] brd: module loaded [ 4.362822] loop: module loaded [ 4.362942] ahci 0000:00:1f.2: version 3.0 [ 4.362951] alloc irq_desc for 19 on node -1 [ 4.362953] alloc kstat_irqs on node -1 [ 4.362958] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.362977] alloc irq_desc for 25 on node -1 [ 4.362978] alloc kstat_irqs on node -1 [ 4.362983] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X [ 4.363040] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 4.363042] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems [ 4.363046] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.400046] scsi0 : ahci [ 4.400179] scsi1 : ahci [ 4.400255] scsi2 : ahci [ 4.400332] scsi3 : ahci [ 4.400406] scsi4 : ahci [ 4.400482] scsi5 : ahci [ 4.400548] ata1: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525100 irq 25 [ 4.400551] ata2: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525180 irq 25 [ 4.400553] ata3: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525200 irq 25 [ 4.400555] ata4: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525280 irq 25 [ 4.400557] ata5: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525300 irq 25 [ 4.400559] ata6: SATA max UDMA/133 abar m2048@0xd0525000 port 0xd0525380 irq 25 [ 4.400611] ata_piix 0000:00:1f.5: version 2.13 [ 4.400617] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.400620] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 4.400642] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 4.400681] scsi6 : ata_piix [ 4.400770] scsi7 : ata_piix [ 4.400834] ata7: SATA max UDMA/133 cmd 0xf170 ctl 0xf160 bmdma 0xf130 irq 19 [ 4.400837] ata8: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma 0xf138 irq 19 [ 4.400919] Fixed MDIO Bus: probed [ 4.401019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.401030] alloc irq_desc for 18 on node -1 [ 4.401031] alloc kstat_irqs on node -1 [ 4.401034] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.401040] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.401042] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.401079] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.404971] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.404975] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.404984] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0525c00 [ 4.420010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.420105] usb usb1: configuration #1 chosen from 1 choice [ 4.420156] hub 1-0:1.0: USB hub found [ 4.420167] hub 1-0:1.0: 6 ports detected [ 4.420205] alloc irq_desc for 23 on node -1 [ 4.420206] alloc kstat_irqs on node -1 [ 4.420209] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.420214] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.420217] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.420254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.424136] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.424141] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.424149] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0525800 [ 4.440009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.440085] usb usb2: configuration #1 chosen from 1 choice [ 4.440133] hub 2-0:1.0: USB hub found [ 4.440138] hub 2-0:1.0: 6 ports detected [ 4.440203] uhci_hcd: USB Universal Host Controller Interface driver [ 4.440254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.440258] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.440261] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.440298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.440323] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0e0 [ 4.440388] usb usb3: configuration #1 chosen from 1 choice [ 4.440424] hub 3-0:1.0: USB hub found [ 4.440429] hub 3-0:1.0: 2 ports detected [ 4.440456] alloc irq_desc for 21 on node -1 [ 4.440457] alloc kstat_irqs on node -1 [ 4.440460] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4.440464] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.440466] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.440503] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.440528] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0c0 [ 4.440592] usb usb4: configuration #1 chosen from 1 choice [ 4.440629] hub 4-0:1.0: USB hub found [ 4.440633] hub 4-0:1.0: 2 ports detected [ 4.440666] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.440669] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.440672] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.440709] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.440729] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f0a0 [ 4.440790] usb usb5: configuration #1 chosen from 1 choice [ 4.440824] hub 5-0:1.0: USB hub found [ 4.440828] hub 5-0:1.0: 2 ports detected [ 4.440856] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.440860] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.440862] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.440898] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.440917] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 4.440980] usb usb6: configuration #1 chosen from 1 choice [ 4.441019] hub 6-0:1.0: USB hub found [ 4.441023] hub 6-0:1.0: 2 ports detected [ 4.441051] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.441055] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.441058] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.441095] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.441114] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 4.441180] usb usb7: configuration #1 chosen from 1 choice [ 4.441213] hub 7-0:1.0: USB hub found [ 4.441217] hub 7-0:1.0: 2 ports detected [ 4.441245] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.441249] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.441251] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.441286] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.441305] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 4.441374] usb usb8: configuration #1 chosen from 1 choice [ 4.441410] hub 8-0:1.0: USB hub found [ 4.441414] hub 8-0:1.0: 2 ports detected [ 4.441522] usbcore: registered new interface driver usbserial [ 4.441551] USB Serial support registered for generic [ 4.441579] usbcore: registered new interface driver usbserial_generic [ 4.441581] usbserial: USB Serial Driver core [ 4.441696] PNP: No PS/2 controller found. Probing ports directly. [ 4.441756] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 4.446088] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.446092] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.446172] mice: PS/2 mouse device common for all mice [ 4.446308] rtc_cmos 00:04: RTC can wake from S4 [ 4.446347] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.446368] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 4.446479] device-mapper: uevent: version 1.0.3 [ 4.446566] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 4.446648] device-mapper: multipath: version 1.1.0 loaded [ 4.446650] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.446955] cpuidle: using governor ladder [ 4.447323] cpuidle: using governor menu [ 4.448358] usbcore: registered new interface driver hiddev [ 4.448397] usbcore: registered new interface driver usbhid [ 4.448399] usbhid: v2.6:USB HID core driver [ 4.448596] TCP cubic registered [ 4.448797] NET: Registered protocol family 10 [ 4.449088] lo: Disabled Privacy Extensions [ 4.449262] NET: Registered protocol family 17 [ 4.449703] PM: Resume from disk failed. [ 4.449712] registered taskstats version 1 [ 4.449774] Magic number: 1:905:564 [ 4.449835] rtc_cmos 00:04: setting system clock to 2009-07-06 04:33:21 UTC (1246854801) [ 4.449837] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.449838] EDD information not available. [ 4.720097] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.720113] ata4: SATA link down (SStatus 0 SControl 300) [ 4.720128] ata3: SATA link down (SStatus 0 SControl 300) [ 4.720142] ata6: SATA link down (SStatus 0 SControl 300) [ 4.720156] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.720168] ata5: SATA link down (SStatus 0 SControl 300) [ 4.730878] ata7: SATA link down (SStatus 0 SControl 300) [ 4.741630] ata8: SATA link down (SStatus 0 SControl 300) [ 4.741672] ata2.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.06, max UDMA/66 [ 4.741794] ata1.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 4.741796] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.742627] ata1.00: configured for UDMA/133 [ 4.742697] scsi 0:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 4.742864] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.742890] sd 0:0:0:0: [sda] Write Protect is off [ 4.742892] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.742905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.742981] sda: [ 4.743065] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.744022] ata2.00: configured for UDMA/66 [ 4.755221] sda1 sda2 sda3 < sda5 sda6 sda7 [ 4.806584] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.06 PQ: 0 ANSI: 5 [ 4.817146] sda8 sda9 sda10 sda11 > [ 4.867722] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.929948] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 4.929950] Uniform CD-ROM driver Revision: 3.20 [ 4.930058] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.930140] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.930207] Freeing unused kernel memory: 428k freed [ 4.930292] Write protecting the kernel read-only data: 6888k [ 5.001004] Clocksource tsc unstable (delta = -134805128 ns) [ 5.014599] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 5.174418] usb 3-1: configuration #1 chosen from 1 choice [ 5.191564] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3 [ 5.191617] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1/input0 [ 5.215426] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4 [ 5.215479] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1/input1 [ 5.452023] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 5.628404] usb 3-2: configuration #1 chosen from 1 choice [ 5.643508] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5 [ 5.643550] generic-usb 0003:046D:C00E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0 [ 6.318161] PM: Starting manual resume from disk [ 6.318163] PM: Resume from partition 8:10 [ 6.318164] PM: Checking hibernation image. [ 6.318264] PM: Resume from disk failed. [ 6.339970] EXT4-fs (dm-0): barriers enabled [ 6.345742] kjournald2 starting: pid 1478, dev dm-0:8, commit interval 5 seconds [ 6.345748] EXT4-fs (dm-0): delayed allocation enabled [ 6.345750] EXT4-fs: file extents enabled [ 6.346227] EXT4-fs: mballoc enabled [ 6.346235] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 7.040082] <6>cp[1526]: segfault at 7ffe3295ae98 ip 00007fb26a7db255 sp 00007ffe3295aea0 error 6 in libattr.so.1.1.0[7fb26a7d9000+4000] [ 9.517574] udev: starting version 144 [ 10.647823] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 10.647825] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 10.647857] alloc irq_desc for 20 on node -1 [ 10.647858] alloc kstat_irqs on node -1 [ 10.647863] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.647870] e1000e 0000:00:19.0: setting latency timer to 64 [ 10.647927] alloc irq_desc for 26 on node -1 [ 10.647928] alloc kstat_irqs on node -1 [ 10.647935] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 10.742376] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:9b:a9:1a [ 10.742379] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 10.742404] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff [ 10.929800] iTCO_vendor_support: vendor-support=0 [ 11.227001] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 11.227058] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 11.227102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.984135] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 12.040067] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 12.040434] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.692856] alloc irq_desc for 22 on node -1 [ 12.692859] alloc kstat_irqs on node -1 [ 12.692866] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.692897] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.813471] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 13.603090] Adding 8787512k swap on /dev/sda10. Priority:-1 extents:1 across:8787512k [ 13.617762] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 13.617764] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 13.618121] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.130826] EXT4-fs (dm-0): internal journal on dm-0:8 [ 14.924417] EXT4-fs (sda6): barriers enabled [ 14.928374] kjournald2 starting: pid 2235, dev sda6:8, commit interval 5 seconds [ 14.928544] EXT4-fs (sda6): internal journal on sda6:8 [ 14.928546] EXT4-fs (sda6): delayed allocation enabled [ 14.928548] EXT4-fs: file extents enabled [ 14.928587] EXT4-fs: mballoc enabled [ 14.928596] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 14.948488] EXT4-fs (sda8): barriers enabled [ 14.967740] kjournald2 starting: pid 2239, dev sda8:8, commit interval 5 seconds [ 14.985246] EXT4-fs (sda8): internal journal on sda8:8 [ 14.985249] EXT4-fs (sda8): delayed allocation enabled [ 14.985250] EXT4-fs: file extents enabled [ 14.985574] EXT4-fs: mballoc enabled [ 14.985584] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 15.010409] EXT4-fs (sda9): barriers enabled [ 15.024453] kjournald2 starting: pid 2242, dev sda9:8, commit interval 5 seconds [ 15.024619] EXT4-fs (sda9): internal journal on sda9:8 [ 15.024621] EXT4-fs (sda9): delayed allocation enabled [ 15.024623] EXT4-fs: file extents enabled [ 15.027011] EXT4-fs: mballoc enabled [ 15.027018] EXT4-fs (sda9): mounted filesystem with ordered data mode [ 15.039131] 0000:00:19.0: eth0: changing MTU from 1500 to 1492 [ 15.297297] <6>mv[2409]: segfault at 7ffee20417f8 ip 00007ff3603d9255 sp 00007ffee2041800 error 6 in libattr.so.1.1.0[7ff3603d7000+4000] [ 16.700792] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 16.700794] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 22.564560] <6>mv[3524]: segfault at 7ffeadbbd758 ip 00007f2b3c2a6255 sp 00007ffeadbbd760 error 6 in libattr.so.1.1.0[7f2b3c2a4000+4000] [ 24.389015] eth0: no IPv6 routers present [ 91.633074] PM: Syncing filesystems ... done. [ 91.977060] PM: Preparing system for mem sleep [ 92.184416] Freezing user space processes ... (elapsed 0.04 seconds) done. [ 92.225017] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 92.225041] PM: Entering mem sleep [ 92.225049] Suspending console(s) (use no_console_suspend to debug) [ 92.260098] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 92.260233] sd 0:0:0:0: [sda] Stopping disk [ 92.746445] ata_piix 0000:00:1f.5: PCI INT B disabled [ 92.872091] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 92.872097] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 92.872103] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 92.872108] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 92.872120] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 92.872152] ACPI handle has no context! [ 92.888081] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 92.888086] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 92.888092] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 92.888097] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 92.946364] e1000e 0000:00:19.0: PCI INT A disabled [ 92.946370] e1000e 0000:00:19.0: PME# enabled [ 92.946376] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 92.985759] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1 [ 92.985764] render error detected, EIR: 0x00000010 [ 92.985765] page table error [ 92.985766] PGTBL_ER: 0x00100000 [ 92.985767] [drm:i915_driver_irq_handler] *ERROR* EIR stuck: 0x00000010, masking [ 93.000097] PM: suspend devices took 0.776 seconds [ 93.000217] ehci_hcd 0000:00:1d.7: PME# disabled [ 93.016118] ehci_hcd 0000:00:1a.7: PME# disabled [ 93.032959] ACPI: Preparing to enter system sleep state S3 [ 93.034172] Disabling non-boot CPUs ... [ 93.036298] kvm: disabling virtualization on CPU1 [ 93.036320] CPU 1 is now offline [ 93.036322] SMP alternatives: switching to UP code [ 93.042149] CPU0 attaching NULL sched-domain. [ 93.042152] CPU1 attaching NULL sched-domain. [ 93.042157] CPU0 attaching NULL sched-domain. [ 93.042297] CPU1 is down [ 93.042686] Extended CMOS year: 2000 [ 93.042686] Back to C! [ 93.042686] CPU0: Thermal LVT vector (0xfa) already installed [ 93.042686] Extended CMOS year: 2000 [ 93.042686] Enabling non-boot CPUs ... [ 93.042686] SMP alternatives: switching to SMP code [ 93.046664] Booting processor 1 APIC 0x1 ip 0x6000 [ 93.042047] Initializing CPU#1 [ 93.042047] Calibrating delay using timer specific routine.. 6002.35 BogoMIPS (lpj=12004716) [ 93.042047] CPU: L1 I cache: 32K, L1 D cache: 32K [ 93.042047] CPU: L2 cache: 6144K [ 93.042047] CPU: Physical Processor ID: 0 [ 93.042047] CPU: Processor Core ID: 1 [ 93.042047] mce: CPU supports 6 MCE banks [ 93.042047] CPU1: Thermal monitoring enabled (TM2) [ 93.136738] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a [ 93.136745] kvm: enabling virtualization on CPU1 [ 93.136794] CPU0 attaching NULL sched-domain. [ 93.137011] Switched to high resolution mode on CPU 1 [ 93.152011] CPU0 attaching sched-domain: [ 93.152013] domain 0: span 0-1 level MC [ 93.152014] groups: 0 1 [ 93.152017] CPU1 attaching sched-domain: [ 93.152018] domain 0: span 0-1 level MC [ 93.152019] groups: 1 0 [ 93.153008] CPU1 is up [ 93.153010] ACPI: Waking up from system sleep state S3 [ 93.153671] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 93.153675] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xf1c1) [ 93.153678] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c) [ 93.153680] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0000004) [ 93.153683] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900407) [ 93.153697] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xd0400004) [ 93.153700] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 93.153713] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x1f2, writing 0x10b) [ 93.153730] pci 0000:00:03.0: restoring config space at offset 0x5 (was 0x18f2, writing 0x0) [ 93.153733] pci 0000:00:03.0: restoring config space at offset 0x4 (was 0xfed10004, writing 0xd0526104) [ 93.153757] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 93.153765] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xf101) [ 93.153769] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xd0524000) [ 93.153772] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0500000) [ 93.153777] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 93.153791] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 93.153799] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0xf0e1) [ 93.153807] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 93.153819] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x203) [ 93.153827] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0xf0c1) [ 93.153835] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 93.153846] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x304) [ 93.153855] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0xf0a1) [ 93.153863] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 93.153879] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x304) [ 93.153892] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0525c00) [ 93.153897] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 93.153910] ehci_hcd 0000:00:1a.7: PME# disabled [ 93.153920] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 93.153931] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 93.153935] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 93.153949] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 93.153957] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0xf081) [ 93.153965] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 93.153977] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x203) [ 93.153985] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xf061) [ 93.153993] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 93.154004] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x304) [ 93.154012] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xf041) [ 93.154020] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 93.154036] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 93.154049] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0525800) [ 93.154054] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 93.154067] ehci_hcd 0000:00:1d.7: PME# disabled [ 93.154077] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 93.154080] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 93.154084] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x0, writing 0x20010100) [ 93.154089] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007) [ 93.154140] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 93.154159] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x300, writing 0x304) [ 93.154166] pci 0000:00:1f.3: restoring config space at offset 0x8 (was 0x1181, writing 0xf001) [ 93.154172] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xd0526004) [ 93.154176] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003) [ 93.156812] i915 0000:00:02.0: setting latency timer to 64 [ 93.218092] [drm] TMDS-12: set mode 1920x1080 1f [ 93.218134] pci 0000:00:02.1: PME# disabled [ 93.218138] pci 0000:00:03.0: PME# disabled [ 93.218176] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 93.218178] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 93.218181] e1000e 0000:00:19.0: setting latency timer to 64 [ 93.218185] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 93.218187] e1000e 0000:00:19.0: PME# disabled [ 93.218189] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 93.218191] e1000e 0000:00:19.0: PME# disabled [ 93.218214] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 93.276195] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 93.276200] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 93.276220] usb usb3: root hub lost power or was reset [ 93.276246] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 93.276251] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 93.276269] usb usb4: root hub lost power or was reset [ 93.276285] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 93.276290] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 93.276308] usb usb5: root hub lost power or was reset [ 93.276324] ehci_hcd 0000:00:1a.7: PME# disabled [ 93.276328] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 93.276333] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 93.276371] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 93.276375] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 93.276393] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 93.276397] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 93.276416] usb usb6: root hub lost power or was reset [ 93.276433] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 93.276439] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 93.276459] usb usb7: root hub lost power or was reset [ 93.276474] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 93.276479] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 93.276497] usb usb8: root hub lost power or was reset [ 93.276514] ehci_hcd 0000:00:1d.7: PME# disabled [ 93.276517] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 93.276522] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 93.276531] pci 0000:00:1e.0: setting latency timer to 64 [ 93.276577] ahci 0000:00:1f.2: setting latency timer to 64 [ 93.276696] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 93.276700] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 93.596029] ata6: SATA link down (SStatus 0 SControl 300) [ 93.606872] ata7: SATA link down (SStatus 0 SControl 300) [ 93.617724] ata8: SATA link down (SStatus 0 SControl 300) [ 93.617745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 93.617764] ata4: SATA link down (SStatus 0 SControl 300) [ 93.618564] sd 0:0:0:0: [sda] Starting disk [ 93.621862] ata2.00: configured for UDMA/66 [ 93.628032] ata5: SATA link down (SStatus 0 SControl 300) [ 93.640029] ata3: SATA link down (SStatus 0 SControl 300) [ 93.652691] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 93.652693] ata2: irq_stat 0x40000001 [ 93.656810] ata2.00: configured for UDMA/66 [ 93.656812] ata2: EH complete [ 94.905851] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 94.905853] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 98.644076] ata1: link is slow to respond, please be patient (ready=0) [ 101.220085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 101.242949] ata1.00: configured for UDMA/133 [ 101.242956] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [ 101.242958] ata1: irq_stat 0x00400040, connection status changed [ 101.244474] ata1.00: configured for UDMA/133 [ 101.244476] ata1: EH complete [ 101.504084] usb 3-1: reset low speed USB device using uhci_hcd and address 2 [ 102.076087] usb 3-2: reset low speed USB device using uhci_hcd and address 3 [ 102.382920] PM: resume devices took 9.228 seconds [ 102.382921] ------------[ cut here ]------------ [ 102.382927] WARNING: at kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80() [ 102.382929] Hardware name: [ 102.382930] Component: resume devices [ 102.382931] Modules linked in: binfmt_misc kvm_intel kvm snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd serio_raw iTCO_wdt iTCO_vendor_support soundcore snd_page_alloc e1000e [ 102.382949] Pid: 4199, comm: bash Not tainted 2.6.31-rc1-25446-g1ae8c0a-dirty #2 [ 102.382951] Call Trace: [ 102.382956] [] warn_slowpath_common+0x78/0xb0 [ 102.382959] [] warn_slowpath_fmt+0x3c/0x40 [ 102.382961] [] suspend_test_finish+0x7c/0x80 [ 102.382964] [] suspend_devices_and_enter+0xb1/0x210 [ 102.382966] [] enter_state+0x12a/0x150 [ 102.382968] [] state_store+0x91/0x100 [ 102.382972] [] kobj_attr_store+0x17/0x20 [ 102.382975] [] sysfs_write_file+0xe0/0x160 [ 102.382979] [] vfs_write+0xb8/0x1a0 [ 102.382982] [] ? filp_close+0x58/0x90 [ 102.382985] [] sys_write+0x4c/0x80 [ 102.382988] [] system_call_fastpath+0x16/0x1b [ 102.382990] ---[ end trace 11e2979285be7425 ]--- [ 102.385376] PM: Finishing wakeup. [ 102.385378] Restarting tasks ... done. [ 120.816090] Corrupted low memory at ffff880000004200 (4200 phys) = 00420301 [ 120.816095] ------------[ cut here ]------------ [ 120.816102] WARNING: at arch/x86/kernel/check.c:134 check_for_bios_corruption+0xe4/0xf0() [ 120.816104] Hardware name: [ 120.816106] Memory corruption detected in low memory [ 120.816107] Modules linked in: binfmt_misc kvm_intel kvm snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd serio_raw iTCO_wdt iTCO_vendor_support soundcore snd_page_alloc e1000e [ 120.816129] Pid: 9, comm: events/0 Tainted: G W 2.6.31-rc1-25446-g1ae8c0a-dirty #2 [ 120.816131] Call Trace: [ 120.816136] [] warn_slowpath_common+0x78/0xb0 [ 120.816139] [] warn_slowpath_fmt+0x3c/0x40 [ 120.816142] [] check_for_bios_corruption+0xe4/0xf0 [ 120.816146] [] ? check_corruption+0x0/0x30 [ 120.816148] [] check_corruption+0x9/0x30 [ 120.816152] [] worker_thread+0x144/0x260 [ 120.816155] [] ? autoremove_wake_function+0x0/0x40 [ 120.816158] [] ? worker_thread+0x0/0x260 [ 120.816161] [] kthread+0x96/0xa0 [ 120.816165] [] child_rip+0xa/0x20 [ 120.816168] [] ? kthread+0x0/0xa0 [ 120.816171] [] ? child_rip+0x0/0x20 [ 120.816173] ---[ end trace 11e2979285be7426 ]--- [ 283.297458] [drm] TMDS-12: set mode 1920x1080 1f