| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 07 Jul 2009 07:37:28 -0400
From: Phillip Lynn <phillip.lynn@...wolves.com>
To: linux-kernel@...r.kernel.org
Subject: Kernel error "kernel BUG at drivers/gpu/drm/i915/i915_gem.c:2136!"
This weekend I was trying to us Google Earth and received the following
kernel error. I have not posted to the group before so if this is not
the correct address to send an error please let me know.
Thank You
Phillip Lynn
Jul 6 20:03:32 plynn54 kernel: ------------[ cut here ]------------
Jul 6 20:03:32 plynn54 kernel: kernel BUG at
drivers/gpu/drm/i915/i915_gem.c:2136!
Jul 6 20:03:32 plynn54 kernel: invalid opcode: 0000 [#1] SMP
Jul 6 20:03:32 plynn54 kernel: last sysfs file:
/sys/devices/pci0000:00/0000:00:1e.0/0000:04:05.0/local_cpus
Jul 6 20:03:32 plynn54 kernel: CPU 1
Jul 6 20:03:32 plynn54 kernel: Modules linked in: fuse nfsd lockd
nfs_acl auth_rpcgss exportfs sco bridge stp llc bnep l2cap bluetooth
coretemp w83627ehf hwmon_vid hwmon sunrpc ipv6 cpufreq_ondemand
acpi_cpufreq freq_table dm_multipath uinput snd_hda_codec_realtek
snd_hda_intel snd_hda_codec snd_hwdep e100 snd_pcm firewire_ohci
snd_timer i2c_i801 firewire_core crc_itu_t e1000e mii snd soundcore
snd_page_alloc pata_jmicron iTCO_wdt iTCO_vendor_support pcspkr
ata_generic pata_acpi i915 drm i2c_algo_bit i2c_core video output [last
unloaded: microcode]
Jul 6 20:03:32 plynn54 kernel: Pid: 9470, comm: googleearth-bin Not
tainted 2.6.29.5-191.fc11.x86_64 #1
Jul 6 20:03:32 plynn54 kernel: RIP: 0010:[<ffffffffa005f3d2>]
[<ffffffffa005f3d2>] i915_gem_object_get_fence_reg+0x221/0x61e [i915]
Jul 6 20:03:32 plynn54 kernel: RSP: 0000:ffff8801f3cb1be8 EFLAGS: 00010202
Jul 6 20:03:32 plynn54 kernel: RAX: 000000000007bbc3 RBX:
ffff8801c01eae40 RCX: 0000000000000010
Jul 6 20:03:32 plynn54 kernel: RDX: 0000000000002982 RSI:
000000000007bbc3 RDI: ffff8801c01ae000
Jul 6 20:03:32 plynn54 kernel: RBP: ffff8801f3cb1c28 R08:
0000000000000004 R09: ffff88022c96b1f0
Jul 6 20:03:32 plynn54 kernel: R10: ffff8801f3cb0000 R11:
ffff8801f3cb1d38 R12: ffff88021a811d80
Jul 6 20:03:32 plynn54 kernel: R13: ffff88022c96b000 R14:
ffff8801c01eacc0 R15: ffff88022c96a000
Jul 6 20:03:32 plynn54 kernel: FS: 0000000000000000(0000)
GS:ffff88022e43e480(0063) knlGS:00000000f7faa700
Jul 6 20:03:32 plynn54 kernel: CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
Jul 6 20:03:32 plynn54 kernel: CR2: 00000000ebe2e000 CR3:
00000001c0057000 CR4: 00000000000006e0
Jul 6 20:03:32 plynn54 kernel: DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Jul 6 20:03:32 plynn54 kernel: DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Jul 6 20:03:32 plynn54 kernel: Process googleearth-bin (pid: 9470,
threadinfo ffff8801f3cb0000, task ffff8801c00bc500)
Jul 6 20:03:32 plynn54 kernel: Stack:
Jul 6 20:03:32 plynn54 kernel: ffff8801f3cb1c38 ffff88022c96b1f0
ffff88022c96a020 ffff8801c01eacc0
Jul 6 20:03:32 plynn54 kernel: ffff88022c96a020 ffff8801c01eae40
ffff8801f4d64210 ffff8801f3cb1ce8
Jul 6 20:03:32 plynn54 kernel: ffff8801f3cb1c98 ffffffffa00610d3
ffff8801f3cb1c68 00000000ebe2e000
Jul 6 20:03:32 plynn54 kernel: Call Trace:
Jul 6 20:03:32 plynn54 kernel: [<ffffffffa00610d3>]
i915_gem_fault+0xc1/0x136 [i915]
Jul 6 20:03:32 plynn54 kernel: [<ffffffff810b213f>] __do_fault+0x55/0x3d5
Jul 6 20:03:32 plynn54 kernel: [<ffffffffa0029305>] ?
drm_agp_bind_memory+0x18/0x1a [drm]
Jul 6 20:03:32 plynn54 kernel: [<ffffffffa00295dc>] ?
drm_agp_bind_pages+0xd8/0x10c [drm]
Jul 6 20:03:32 plynn54 kernel: [<ffffffff810b4475>]
handle_mm_fault+0x349/0x7c5
Jul 6 20:03:32 plynn54 kernel: [<ffffffff813ae615>]
do_page_fault+0x5b5/0x9e9
Jul 6 20:03:32 plynn54 kernel: [<ffffffff8103a0e9>] ?
__dequeue_entity+0x33/0x38
Jul 6 20:03:32 plynn54 kernel: [<ffffffff813ac01a>] ?
unlock_kernel+0x2f/0x32
Jul 6 20:03:32 plynn54 kernel: [<ffffffffa006f42f>] ?
i915_compat_ioctl+0x74/0x81 [i915]
Jul 6 20:03:32 plynn54 kernel: [<ffffffff8110a0d7>] ?
compat_sys_ioctl+0x352/0x367
Jul 6 20:03:32 plynn54 kernel: [<ffffffff813abab5>] ?
trace_hardirqs_off_thunk+0x3a/0x6c
Jul 6 20:03:32 plynn54 kernel: [<ffffffff813ac175>] page_fault+0x25/0x30
Jul 6 20:03:32 plynn54 kernel: Code: ff e8 35 e9 ff ff 85 c0 0f 84 b3
fe ff ff e9 06 04 00 00 41 83 7c 24 20 00 75 10 48 8b 55 c8 48 8b 02 f7
40 70 be ff ff ff 74 04 <0f> 0b eb fe 49 8b bf 38 01 00 00 48 8b 70 38
48 85 ff 74 1a 48
Jul 6 20:03:32 plynn54 kernel: RIP [<ffffffffa005f3d2>]
i915_gem_object_get_fence_reg+0x221/0x61e [i915]
Jul 6 20:03:32 plynn54 kernel: RSP <ffff8801f3cb1be8>
Jul 6 20:03:32 plynn54 kernel: ---[ end trace 5745c84a41a3540a ]---
Jul 6 20:04:14 plynn54 mountd[1829]: Caught signal 15, un-registering
and exiting.
Jul 6 20:04:14 plynn54 kernel: nfsd: last server has exited, flushing
export cache
Jul 6 20:04:18 plynn54 init: prefdm main process (2164) killed by KILL
signal
Jul 6 20:04:45 plynn54 squid[2056]: Squid Parent: child process 2059
exited with status 0
Jul 6 20:04:49 plynn54 xinetd[1764]: Exiting...
Jul 6 20:04:49 plynn54 acpid: exiting
Jul 6 20:04:49 plynn54 NetworkManager: <info> HAL disappeared
Jul 6 20:04:49 plynn54 pcscd: pcscdaemon.c:581:signal_trap() Preparing
for suicide
Jul 6 20:04:50 plynn54 pcscd: readerfactory.c:1242:RFCleanupReaders()
entering cleaning function
Jul 6 20:04:50 plynn54 pcscd: pcscdaemon.c:531:at_exit() cleaning /var/run
Jul 6 20:04:50 plynn54 bluetoothd[1695]: bridge pan0 removed
Jul 6 20:04:50 plynn54 bluetoothd[1695]: Stopping SDP server
Jul 6 20:04:50 plynn54 bluetoothd[1695]: Exit
Jul 6 20:04:50 plynn54 NetworkManager: <WARN> nm_signal_handler():
Caught signal 15, shutting down normally.
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth1): now unmanaged
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth1): device state
change: 2 -> 1
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth1): cleaning up...
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth1): taking down device.
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth0): now unmanaged
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth0): device state
change: 8 -> 1
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth0): deactivating
device (reason: 36).
Jul 6 20:04:50 plynn54 NetworkManager: <WARN> check_one_route():
(eth0) error -34 returned from rtnl_route_del(): Sucess#012
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth0): cleaning up...
Jul 6 20:04:50 plynn54 NetworkManager: <info> (eth0): taking down device.
Jul 6 20:04:51 plynn54 NetworkManager: <info> exiting (success)
Jul 6 20:04:52 plynn54 nm-system-settings: disconnected from the system
bus, exiting.
Jul 6 20:04:52 plynn54 nm-dispatcher.action: Disconnected from the
system bus, exiting.
Jul 6 20:04:52 plynn54 rpc.statd[1384]: Caught signal 15,
un-registering and exiting.
Jul 6 20:04:52 plynn54 rpcbind: rpcbind terminating on signal. Restart
with "rpcbind -w"
Jul 6 20:04:52 plynn54 auditd[1313]: Error sending signal_info request
(Operation not supported)
Jul 6 20:04:52 plynn54 auditd[1313]: The audit daemon is exiting.
Jul 6 20:04:52 plynn54 kernel: audit(1246925092.486:387): audit_pid=0
old=1313 auid=4294967295 ses=4294967295 res=1
Jul 6 20:04:52 plynn54 kernel: Kernel logging (proc) stopped.
Jul 6 20:05:29 plynn54 kernel: imklog 3.21.11, log source = /proc/kmsg
started.
Jul 6 20:05:29 plynn54 kernel: Initializing cgroup subsys cpuset
Jul 6 20:05:29 plynn54 kernel: Initializing cgroup subsys cpu
Jul 6 20:05:29 plynn54 kernel: Linux version 2.6.29.5-191.fc11.x86_64
(mockbuild@...-5.fedora.phx.redhat.com) (gcc version 4.4.0 20090506 (Red
Hat 4.4.0-4) (GCC) ) #1 SMP Tue Jun 16 23:23:21 EDT 2009
Jul 6 20:05:29 plynn54 kernel: Command line: ro
root=/dev/VolGroup00/LogVol00 rhgb quiet
Jul 6 20:05:29 plynn54 kernel: KERNEL supported cpus:
Jul 6 20:05:29 plynn54 kernel: Intel GenuineIntel
Jul 6 20:05:29 plynn54 kernel: AMD AuthenticAMD
Jul 6 20:05:29 plynn54 kernel: Centaur CentaurHauls
Jul 6 20:05:29 plynn54 kernel: BIOS-provided physical RAM map:
Jul 6 20:05:29 plynn54 kernel: BIOS-e820: 0000000000000000 -
000000000008f000 (usable)
Jul 6 20:05:29 plynn54 kernel: BIOS-e820: 000000000008f000 -
00000000000a0000 (reserved)
Dmesg:
[plynn54@...nn54 ~]$
dmesg
Initializing cgroup subsys
cpuset
Initializing cgroup subsys
cpu
Linux version 2.6.29.5-191.fc11.x86_64
(mockbuild@...-5.fedora.phx.redhat.com) (gcc version 4.4.0 20090506 (Red
Hat 4.4.0-4) (GCC) ) #1 SMP Tue Jun 16 23:23:21 EDT
2009
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb
quiet
KERNEL supported
cpus:
Intel
GenuineIntel
AMD
AuthenticAMD
Centaur
CentaurHauls
BIOS-provided physical RAM
map:
BIOS-e820: 0000000000000000 - 000000000008f000
(usable)
BIOS-e820: 000000000008f000 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 00000000cf543000
(usable)
BIOS-e820: 00000000cf543000 - 00000000cf54f000
(reserved)
BIOS-e820: 00000000cf54f000 - 00000000cf5fe000
(usable)
BIOS-e820: 00000000cf5fe000 - 00000000cf6e8000 (ACPI
NVS)
BIOS-e820: 00000000cf6e8000 - 00000000cf6ec000
(usable)
BIOS-e820: 00000000cf6ec000 - 00000000cf6f1000 (ACPI
data)
BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000
(usable)
BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI
data)
BIOS-e820: 00000000cf6ff000 - 00000000cf700000
(usable)
BIOS-e820: 00000000cf700000 - 00000000d0000000
(reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
BIOS-e820: 0000000100000000 - 0000000230000000
(usable)
DMI 2.4
present.
last_pfn = 0x230000 max_arch_pfn =
0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
original variable
MTRRs
reg 0, base: 0GB, range: 2GB, type
WB
reg 1, base: 2GB, range: 1GB, type
WB
reg 2, base: 3GB, range: 256MB, type
WB
reg 3, base: 3320MB, range: 8MB, type
UC
reg 4, base: 3319MB, range: 1MB, type
UC
reg 5, base: 4GB, range: 4GB, type
WB
reg 6, base: 8GB, range: 2GB, type
WB
total RAM coverred:
9463M
Found optimal setting for mtrr clean
up
gran_size: 64K chunk_size: 16M num_reg: 7 lose
cover RAM: 0G
New variable
MTRRs
reg 0, base: 0GB, range: 2GB, type
WB
reg 1, base: 2GB, range: 1GB, type
WB
reg 2, base: 3GB, range: 256MB, type
WB
reg 3, base: 3319MB, range: 1MB, type
UC
reg 4, base: 3320MB, range: 8MB, type
UC
reg 5, base: 4GB, range: 4GB, type
WB
reg 6, base: 8GB, range: 2GB, type
WB
x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
last_pfn = 0xcf700 max_arch_pfn =
0x100000000
init_memory_mapping:
0000000000000000-00000000cf700000
0000000000 - 00cf600000 page
2M
00cf600000 - 00cf700000 page
4k
kernel direct mapping tables up to cf700000 @
8000-e000
last_map_addr: cf700000 end:
cf700000
init_memory_mapping:
0000000100000000-0000000230000000
0100000000 - 0230000000 page
2M
kernel direct mapping tables up to 230000000 @
c000-16000
last_map_addr: 230000000 end:
230000000
RAMDISK: 37c6e000 -
37fef9c0
ACPI: RSDP 000FE020, 0014 (r0 INTEL
)
ACPI: RSDT CF6FD038, 004C (r1 INTEL ECG3510M 6A
1000013)
ACPI: FACP CF6FC000, 0074 (r1 INTEL ECG3510M 6A MSFT
1000013)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN
(4)
ACPI: DSDT CF6F6000, 5BEB (r1 INTEL ECG3510M 6A MSFT
1000013)
ACPI: FACS CF693000,
0040
ACPI: APIC CF6F5000, 0078 (r1 INTEL ECG3510M 6A MSFT
1000013)
ACPI: WDDT CF6F4000, 0040 (r1 INTEL ECG3510M 6A MSFT
1000013)
ACPI: MCFG CF6F3000, 003C (r1 INTEL ECG3510M 6A MSFT
1000013)
ACPI: ASF! CF6F2000, 00A6 (r32 INTEL ECG3510M 6A MSFT
1000013)
ACPI: SSDT CF6F0000, 020C (r1 INTEL CpuPm 6A MSFT
1000013)
ACPI: SSDT CF6EF000, 01B7 (r1 INTEL Cpu0Ist 6A MSFT
1000013)
ACPI: SSDT CF6EE000, 01B7 (r1 INTEL Cpu1Ist 6A MSFT
1000013)
ACPI: SSDT CF6ED000, 01B7 (r1 INTEL Cpu2Ist 6A MSFT
1000013)
ACPI: SSDT CF6EC000, 01B7 (r1 INTEL Cpu3Ist 6A MSFT
1000013)
ACPI: Local APIC address
0xfee00000
No NUMA configuration
found
Faking a node at
0000000000000000-0000000230000000
Bootmem setup node 0
0000000000000000-0000000230000000
NODE_DATA [0000000000011000 -
0000000000025fff]
bootmap [0000000000026000 - 000000000006bfff] pages
46
(7 early reservations) ==> bootmem [0000000000 -
0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
#2 [0000200000 - 0000ac700c] TEXT DATA BSS ==> [0000200000 -
0000ac700c]
#3 [0037c6e000 - 0037fef9c0] RAMDISK ==> [0037c6e000 -
0037fef9c0]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
#5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 -
000000c000]
#6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 -
0000011000]
found SMP MP-table at [ffff8800000fe200]
000fe200
[ffffe20000000000-ffffe20007bfffff] PMD ->
[ffff880028200000-ffff88002f3fffff] on node 0
Zone PFN
ranges:
DMA 0x00000000 ->
0x00001000
DMA32 0x00001000 ->
0x00100000
Normal 0x00100000 ->
0x00230000
Movable zone start PFN for each
node
early_node_map[7] active PFN
ranges
0: 0x00000000 ->
0x0000008f
0: 0x00000100 ->
0x000cf543
0: 0x000cf54f ->
0x000cf5fe
0: 0x000cf6e8 ->
0x000cf6ec
0: 0x000cf6f1 ->
0x000cf6f2
0: 0x000cf6ff ->
0x000cf700
0: 0x00100000 ->
0x00230000
On node 0 totalpages:
2094471
DMA zone: 56 pages used for
memmap
DMA zone: 2357 pages
reserved
DMA zone: 1570 pages, LIFO
batch:0
DMA32 zone: 14280 pages used for
memmap
DMA32 zone: 831024 pages, LIFO
batch:31
Normal zone: 17024 pages used for
memmap
Normal zone: 1228160 pages, LIFO
batch:31
ACPI: PM-Timer IO Port:
0x408
ACPI: Local APIC address
0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02]
enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01]
enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03]
enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl
lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl
lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000]
gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI
0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
ACPI: IRQ0 used by
override.
ACPI: IRQ2 used by
override.
ACPI: IRQ9 used by
override.
Using ACPI (MADT) for SMP configuration
information
SMP: Allowing 4 CPUs, 0 hotplug
CPUs
nr_irqs_gsi:
24
PM: Registered nosave memory: 000000000008f000 -
00000000000a0000
PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
PM: Registered nosave memory: 00000000cf543000 -
00000000cf54f000
PM: Registered nosave memory: 00000000cf5fe000 -
00000000cf6e8000
PM: Registered nosave memory: 00000000cf6ec000 -
00000000cf6f1000
PM: Registered nosave memory: 00000000cf6f2000 -
00000000cf6ff000
PM: Registered nosave memory: 00000000cf700000 -
00000000d0000000
PM: Registered nosave memory: 00000000d0000000 -
00000000fff00000
PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
Allocating PCI resources starting at d4000000 (gap:
d0000000:2ff00000)
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4
nr_node_ids:1
PERCPU: Allocating 57344 bytes of per cpu
data
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
2060754
Policy zone:
Normal
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb
quiet
Initializing
CPU#0
PID hash table entries: 4096 (order: 12, 32768
bytes)
Fast TSC calibration using
PIT
Detected 2653.394 MHz
processor.
Console: colour VGA+
80x25
console [tty0]
enabled
allocated 83886080 bytes of
page_cgroup
please try cgroup_disable=memory option if you don't
want
Checking
aperture...
No AGP bridge
found
Calgary: detecting Calgary via BIOS EBDA
area
Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
PCI-DMA: Using software bounce buffering for IO
(SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
software IO TLB at phys 0x20000000 -
0x24000000
Memory: 8099988k/9175040k available (3786k kernel code, 797156k absent,
277896k reserved, 2293k data, 1304k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5306.78 BogoMIPS (lpj=2653394)
Security Framework
initialized
SELinux:
Initializing.
SELinux: Starting in permissive
mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
Mount-cache hash table entries:
256
Initializing cgroup subsys
ns
Initializing cgroup subsys
cpuacct
Initializing cgroup subsys
memory
Initializing cgroup subsys
devices
Initializing cgroup subsys
freezer
Initializing cgroup subsys
net_cls
CPU: L1 I cache: 32K, L1 D cache:
32K
CPU: L2 cache:
4096K
CPU 0/0x0 -> Node
0
CPU: Physical Processor ID:
0
CPU: Processor Core ID:
0
CPU0: Thermal monitoring enabled
(TM2)
using mwait in idle
threads.
ACPI: Core revision
20081204
ftrace: converting mcount calls to 0f 1f 44 00
00
ftrace: allocating 18886 entries in 149
pages
Setting APIC routing to
flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1
pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping
0b
APIC calibration not consistent with PM Timer: 101ms instead of
100ms
APIC delta adjusted to PM-Timer: 1658328
(1691240)
Booting processor 1 APIC 0x2 ip
0x6000
Initializing
CPU#1
Calibrating delay using timer specific routine.. 5306.64 BogoMIPS
(lpj=2653324)
CPU: L1 I cache: 32K, L1 D cache:
32K
CPU: L2 cache:
4096K
CPU 1/0x2 -> Node
0
CPU: Physical Processor ID:
0
CPU: Processor Core ID:
2
CPU1: Thermal monitoring enabled
(TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
CPU1: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping
0b
checking TSC synchronization [CPU#0 -> CPU#1]:
passed.
Booting processor 2 APIC 0x1 ip
0x6000
Initializing
CPU#2
Calibrating delay using timer specific routine.. 5306.62 BogoMIPS
(lpj=2653311)
CPU: L1 I cache: 32K, L1 D cache:
32K
CPU: L2 cache:
4096K
CPU 2/0x1 -> Node
0
CPU: Physical Processor ID:
0
CPU: Processor Core ID:
1
CPU2: Thermal monitoring enabled
(TM2)
x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
CPU2: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping
0b
checking TSC synchronization [CPU#0 -> CPU#2]:
passed.
Booting processor 3 APIC 0x3 ip
0x6000
Initializing
CPU#3
Calibrating delay using timer specific routine.. 5306.62 BogoMIPS
(lpj=2653312)
CPU: L1 I cache: 32K, L1 D cache:
32K
CPU: L2 cache:
4096K
CPU 3/0x3 -> Node
0
CPU: Physical Processor ID:
0
CPU: Processor Core ID:
3
CPU3: Thermal monitoring enabled
(TM2)
x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
CPU3: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping
0b
checking TSC synchronization [CPU#0 -> CPU#3]:
passed.
Brought up 4
CPUs
Total of 4 processors activated (21226.68
BogoMIPS).
sizeof(vma)=176
bytes
sizeof(page)=56
bytes
sizeof(inode)=560
bytes
sizeof(dentry)=192
bytes
sizeof(ext3inode)=760
bytes
sizeof(buffer_head)=104
bytes
sizeof(skbuff)=232
bytes
sizeof(task_struct)=5880
bytes
CPU0 attaching
sched-domain:
domain 0: span 0,2 level
MC
groups: 0
2
domain 1: span 0-3 level
CPU
groups: 0,2
1,3
CPU1 attaching
sched-domain:
domain 0: span 1,3 level
MC
groups: 1
3
domain 1: span 0-3 level
CPU
groups: 1,3
0,2
CPU2 attaching
sched-domain:
domain 0: span 0,2 level
MC
groups: 2
0
domain 1: span 0-3 level
CPU
groups: 0,2
1,3
CPU3 attaching
sched-domain:
domain 0: span 1,3 level
MC
groups: 3
1
domain 1: span 0-3 level
CPU
groups: 1,3
0,2
net_namespace: 1904
bytes
Booting paravirtualized kernel on bare
hardware
regulator: core version
0.5
Time: 0:05:13 Date:
07/07/09
NET: Registered protocol family
16
ACPI: bus type pci
registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 -
127
PCI: Not using
MMCONFIG.
PCI: Using configuration type 1 for base
access
bio: create slab <bio-0> at
0
ACPI: EC: Look up EC in
DSDT
ACPI: Interpreter
enabled
ACPI: (supports S0 S1 S3 S4
S5)
ACPI: Using IOAPIC for interrupt
routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 -
127
PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
PCI: Using MMCONFIG at f0000000 -
f7ffffff
ACPI: No dock devices
found.
ACPI: PCI Root Bridge [PCI0]
(0000:00)
pci 0000:00:02.0: reg 10 32bit mmio:
[0xe0200000-0xe02fffff]
pci 0000:00:02.0: reg 18 64bit mmio:
[0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port:
[0x3440-0x3447]
pci 0000:00:02.1: reg 10 32bit mmio:
[0xe0100000-0xe01fffff]
pci 0000:00:19.0: reg 10 32bit mmio:
[0xe0300000-0xe031ffff]
pci 0000:00:19.0: reg 14 32bit mmio:
[0xe0324000-0xe0324fff]
pci 0000:00:19.0: reg 18 io port:
[0x30c0-0x30df]
pci 0000:00:19.0: PME# supported from D0 D3hot
D3cold
pci 0000:00:19.0: PME#
disabled
pci 0000:00:1a.0: reg 20 io port:
[0x30a0-0x30bf]
pci 0000:00:1a.1: reg 20 io port:
[0x3080-0x309f]
pci 0000:00:1a.7: reg 10 32bit mmio:
[0xe0325400-0xe03257ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot
D3cold
pci 0000:00:1a.7: PME#
disabled
pci 0000:00:1b.0: reg 10 64bit mmio:
[0xe0320000-0xe0323fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot
D3cold
pci 0000:00:1b.0: PME#
disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.0: PME#
disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.1: PME#
disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot
D3cold
pci 0000:00:1c.2: PME#
disabled
pci 0000:00:1d.0: reg 20 io port:
[0x3060-0x307f]
pci 0000:00:1d.1: reg 20 io port:
[0x3040-0x305f]
pci 0000:00:1d.2: reg 20 io port:
[0x3020-0x303f]
pci 0000:00:1d.7: reg 10 32bit mmio:
[0xe0325000-0xe03253ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot
D3cold
pci 0000:00:1d.7: PME#
disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask
007f)
pci 0000:00:1f.2: reg 10 io port:
[0x3438-0x343f]
pci 0000:00:1f.2: reg 14 io port:
[0x3454-0x3457]
pci 0000:00:1f.2: reg 18 io port:
[0x3430-0x3437]
pci 0000:00:1f.2: reg 1c io port:
[0x3450-0x3453]
pci 0000:00:1f.2: reg 20 io port:
[0x3410-0x341f]
pci 0000:00:1f.2: reg 24 io port:
[0x3400-0x340f]
pci 0000:00:1f.2: PME# supported from
D3hot
pci 0000:00:1f.2: PME#
disabled
pci 0000:00:1f.3: reg 10 32bit mmio:
[0xe0325800-0xe03258ff]
pci 0000:00:1f.3: reg 20 io port:
[0x3000-0x301f]
pci 0000:00:1f.5: reg 10 io port:
[0x3428-0x342f]
pci 0000:00:1f.5: reg 14 io port:
[0x344c-0x344f]
pci 0000:00:1f.5: reg 18 io port:
[0x3420-0x3427]
pci 0000:00:1f.5: reg 1c io port:
[0x3448-0x344b]
pci 0000:00:1f.5: reg 20 io port:
[0x30f0-0x30ff]
pci 0000:00:1f.5: reg 24 io port:
[0x30e0-0x30ef]
pci 0000:00:1f.5: PME# supported from
D3hot
pci 0000:00:1f.5: PME#
disabled
pci 0000:03:00.0: reg 10 io port:
[0x2018-0x201f]
pci 0000:03:00.0: reg 14 io port:
[0x2024-0x2027]
pci 0000:03:00.0: reg 18 io port:
[0x2010-0x2017]
pci 0000:03:00.0: reg 1c io port:
[0x2020-0x2023]
pci 0000:03:00.0: reg 20 io port:
[0x2000-0x200f]
pci 0000:03:00.0: reg 30 32bit mmio:
[0xffff0000-0xffffffff]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable
it with 'pcie_aspm=force'
pci 0000:00:1c.2: bridge io port:
[0x2000-0x2fff]
pci 0000:04:03.0: reg 10 32bit mmio:
[0xe0021000-0xe0021fff]
pci 0000:04:03.0: reg 14 io port:
[0x1000-0x103f]
pci 0000:04:03.0: reg 18 32bit mmio:
[0xe0000000-0xe001ffff]
pci 0000:04:03.0: reg 30 32bit mmio:
[0xffff0000-0xffffffff]
pci 0000:04:03.0: supports D1
D2
pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
D3cold
pci 0000:04:03.0: PME#
disabled
pci 0000:04:05.0: reg 10 32bit mmio:
[0xe0020000-0xe0020fff]
pci 0000:04:05.0: supports D1
D2
pci 0000:04:05.0: PME# supported from D0 D1 D2
D3hot
pci 0000:04:05.0: PME#
disabled
pci 0000:00:1e.0: transparent
bridge
pci 0000:00:1e.0: bridge io port:
[0x1000-0x1fff]
pci 0000:00:1e.0: bridge 32bit mmio:
[0xe0000000-0xe00fffff]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11
12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11
12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11
12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11
12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11
12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11
12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11
12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11
12)
SCSI subsystem
initialized
libata version 3.00
loaded.
usbcore: registered new interface driver
usbfs
usbcore: registered new interface driver
hub
usbcore: registered new device driver
usb
PCI: Using ACPI for IRQ
routing
NetLabel:
Initializing
NetLabel: domain hash size =
128
NetLabel: protocols = UNLABELED
CIPSOv4
NetLabel: unlabeled traffic allowed by
default
pnp: PnP ACPI
init
ACPI: bus type pnp
registered
pnp: PnP ACPI: found 10
devices
ACPI: ACPI bus type pnp
unregistered
system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
system 00:01: iomem range 0xfed13000-0xfed13fff has been
reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been
reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
system 00:01: iomem range 0xfed45000-0xfed99fff has been
reserved
system 00:01: iomem range 0xc0000-0xdffff has been
reserved
system 00:01: iomem range 0xe0000-0xfffff could not be
reserved
system 00:06: ioport range 0x500-0x53f has been
reserved
system 00:06: ioport range 0x400-0x47f has been
reserved
system 00:06: ioport range 0x360-0x361 has been
reserved
system 00:06: ioport range 0x680-0x6ff has been
reserved
pci 0000:00:1c.0: PCI bridge, secondary bus
0000:01
pci 0000:00:1c.0: IO window:
disabled
pci 0000:00:1c.0: MEM window:
disabled
pci 0000:00:1c.0: PREFETCH window:
disabled
pci 0000:00:1c.1: PCI bridge, secondary bus
0000:02
pci 0000:00:1c.1: IO window:
disabled
pci 0000:00:1c.1: MEM window:
disabled
pci 0000:00:1c.1: PREFETCH window:
disabled
pci 0000:00:1c.2: PCI bridge, secondary bus
0000:03
pci 0000:00:1c.2: IO window:
0x2000-0x2fff
pci 0000:00:1c.2: MEM window:
disabled
pci 0000:00:1c.2: PREFETCH window:
0x000000e0400000-0x000000e04fffff
pci 0000:00:1e.0: PCI bridge, secondary bus
0000:04
pci 0000:00:1e.0: IO window:
0x1000-0x1fff
pci 0000:00:1e.0: MEM window:
0xe0000000-0xe00fffff
pci 0000:00:1e.0: PREFETCH window:
0x000000e0500000-0x000000e05fffff
alloc irq_desc for 17 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
pci 0000:00:1c.0: setting latency timer to
64
alloc irq_desc for 16 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ
16
pci 0000:00:1c.1: setting latency timer to
64
alloc irq_desc for 18 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
pci 0000:00:1c.2: setting latency timer to
64
pci 0000:00:1e.0: setting latency timer to
64
pci_bus 0000:00: resource 0 io:
[0x00-0xffff]
pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 mem:
[0x0-0x0]
pci_bus 0000:01: resource 1 mem:
[0x0-0x0]
pci_bus 0000:01: resource 2 mem:
[0x0-0x0]
pci_bus 0000:01: resource 3 mem:
[0x0-0x0]
pci_bus 0000:02: resource 0 mem:
[0x0-0x0]
pci_bus 0000:02: resource 1 mem:
[0x0-0x0]
pci_bus 0000:02: resource 2 mem:
[0x0-0x0]
pci_bus 0000:02: resource 3 mem:
[0x0-0x0]
pci_bus 0000:03: resource 0 io:
[0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem:
[0x0-0x0]
pci_bus 0000:03: resource 2 mem:
[0xe0400000-0xe04fffff]
pci_bus 0000:03: resource 3 mem:
[0x0-0x0]
pci_bus 0000:04: resource 0 io:
[0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem:
[0xe0000000-0xe00fffff]
pci_bus 0000:04: resource 2 mem:
[0xe0500000-0xe05fffff]
pci_bus 0000:04: resource 3 io:
[0x00-0xffff]
pci_bus 0000:04: resource 4 mem:
[0x000000-0xffffffffffffffff]
NET: Registered protocol family
2
IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
TCP: Hash tables configured (established 524288 bind
65536)
TCP reno
registered
NET: Registered protocol family
1
checking if image is initramfs... it
is
Freeing initrd memory: 3590k
freed
audit: initializing netlink socket
(disabled)
type=2000 audit(1246925112.503:1):
initialized
HugeTLB registered 2 MB page size, pre-allocated 0
pages
VFS: Disk quotas
dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
msgmni has been set to
15827
SELinux: Registering netfilter
hooks
alg: No test for stdrng
(krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
io scheduler noop
registered
io scheduler anticipatory
registered
io scheduler deadline
registered
io scheduler cfq registered
(default)
pci 0000:00:02.0: Boot video
device
pci 0000:04:03.0: Firmware left e100 interrupts enabled;
disabling
pcieport-driver 0000:00:1c.0: setting latency timer to
64
alloc irq_desc for 24 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
pcieport-driver 0000:00:1c.0: irq 24 for
MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to
64
alloc irq_desc for 25 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
pcieport-driver 0000:00:1c.1: irq 25 for
MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to
64
alloc irq_desc for 26 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
pcieport-driver 0000:00:1c.2: irq 26 for
MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version:
0.5
pciehp: PCI Express Hot Plug Controller Driver version:
0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version:
0.5
acpiphp_glue: can't get bus number, assuming
0
input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF)
[PWRF]
input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button (CM)
[SLPB]
processor ACPI_CPU:00: registered as
cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling
states)
processor ACPI_CPU:01: registered as
cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling
states)
processor ACPI_CPU:02: registered as
cooling_device2
ACPI: Processor [CPU2] (supports 8 throttling
states)
processor ACPI_CPU:03: registered as
cooling_device3
ACPI: Processor [CPU3] (supports 8 throttling
states)
Non-volatile memory driver
v1.3
Linux agpgart interface
v0.103
agpgart-intel 0000:00:00.0: Intel G35
Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen
memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing
enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
brd: module
loaded
loop: module
loaded
Fixed MDIO Bus:
probed
input: Macintosh mouse button emulation as
/devices/virtual/input/input2
Driver 'sd' needs updating - please use bus_type
methods
Driver 'sr' needs updating - please use bus_type
methods
ata_piix 0000:00:1f.2: version
2.12
alloc irq_desc for 19 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ
19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3
]
Switched to high resolution mode on CPU
1
Switched to high resolution mode on CPU
3
Switched to high resolution mode on CPU
2
Switched to high resolution mode on CPU
0
ata_piix 0000:00:1f.2: setting latency timer to
64
scsi0 :
ata_piix
scsi1 :
ata_piix
ata1: SATA max UDMA/133 cmd 0x3438 ctl 0x3454 bmdma 0x3410 irq
19
ata2: SATA max UDMA/133 cmd 0x3430 ctl 0x3450 bmdma 0x3418 irq
19
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl
300)
ata1.01: SATA link down (SStatus 4 SControl
300)
ata1.00: ATA-8: WDC WD5000AAKS-22A7B2, 01.03B01, max
UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
0/32)
ata1.00: configured for
UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465
GiB)
sd 0:0:0:0: [sda] Write Protect is
off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465
GiB)
sd 0:0:0:0: [sda] Write Protect is
off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1
sda2
sd 0:0:0:0: [sda] Attached SCSI
disk
sd 0:0:0:0: Attached scsi generic sg0 type
0
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl
300)
ata2.01: SATA link down (SStatus 4 SControl
300)
ata2.00: ATAPI: SONY DVD RW DRU-V200S, 1.60, max
UDMA/100
ata2.00: configured for
UDMA/100
scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-V200S 1.60 PQ: 0
ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
Uniform CD-ROM driver Revision:
3.20
sr 1:0:0:0: Attached scsi CD-ROM
sr0
sr 1:0:0:0: Attached scsi generic sg1 type
5
ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ
19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 --
]
ata_piix 0000:00:1f.5: setting latency timer to
64
scsi2 :
ata_piix
scsi3 :
ata_piix
ata3: SATA max UDMA/133 cmd 0x3428 ctl 0x344c bmdma 0x30f0 irq
19
ata4: SATA max UDMA/133 cmd 0x3420 ctl 0x3448 bmdma 0x30f8 irq
19
ata3: SATA link down (SStatus 0 SControl
300)
ata4: SATA link down (SStatus 0 SControl
300)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
ehci_hcd 0000:00:1a.7: setting latency timer to
64
ehci_hcd 0000:00:1a.7: EHCI Host
Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number
1
ehci_hcd 0000:00:1a.7: debug port
1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not
supported
ehci_hcd 0000:00:1a.7: irq 18, io mem
0xe0325400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI
1.00
usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb1: Product: EHCI Host
Controller
usb usb1: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
ehci_hcd
usb usb1: SerialNumber:
0000:00:1a.7
usb usb1: configuration #1 chosen from 1
choice
hub 1-0:1.0: USB hub
found
hub 1-0:1.0: 4 ports
detected
alloc irq_desc for 23 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
ehci_hcd 0000:00:1d.7: setting latency timer to
64
ehci_hcd 0000:00:1d.7: EHCI Host
Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number
2
ehci_hcd 0000:00:1d.7: debug port
1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
ehci_hcd 0000:00:1d.7: irq 23, io mem
0xe0325000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI
1.00
usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb2: Product: EHCI Host
Controller
usb usb2: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
ehci_hcd
usb usb2: SerialNumber:
0000:00:1d.7
usb usb2: configuration #1 chosen from 1
choice
hub 2-0:1.0: USB hub
found
hub 2-0:1.0: 6 ports
detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
Driver
uhci_hcd: USB Universal Host Controller Interface
driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
uhci_hcd 0000:00:1a.0: setting latency timer to
64
uhci_hcd 0000:00:1a.0: UHCI Host
Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number
3
uhci_hcd 0000:00:1a.0: irq 16, io base
0x000030a0
usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb3: Product: UHCI Host
Controller
usb usb3: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
uhci_hcd
usb usb3: SerialNumber:
0000:00:1a.0
usb usb3: configuration #1 chosen from 1
choice
hub 3-0:1.0: USB hub
found
hub 3-0:1.0: 2 ports
detected
alloc irq_desc for 21 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
uhci_hcd 0000:00:1a.1: setting latency timer to
64
uhci_hcd 0000:00:1a.1: UHCI Host
Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number
4
uhci_hcd 0000:00:1a.1: irq 21, io base
0x00003080
usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb4: Product: UHCI Host
Controller
usb usb4: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
uhci_hcd
usb usb4: SerialNumber:
0000:00:1a.1
usb usb4: configuration #1 chosen from 1
choice
hub 4-0:1.0: USB hub
found
hub 4-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
uhci_hcd 0000:00:1d.0: setting latency timer to
64
uhci_hcd 0000:00:1d.0: UHCI Host
Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number
5
uhci_hcd 0000:00:1d.0: irq 23, io base
0x00003060
usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb5: Product: UHCI Host
Controller
usb usb5: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
uhci_hcd
usb usb5: SerialNumber:
0000:00:1d.0
usb usb5: configuration #1 chosen from 1
choice
hub 5-0:1.0: USB hub
found
hub 5-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
uhci_hcd 0000:00:1d.1: setting latency timer to
64
uhci_hcd 0000:00:1d.1: UHCI Host
Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number
6
uhci_hcd 0000:00:1d.1: irq 19, io base
0x00003040
usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb6: Product: UHCI Host
Controller
usb usb6: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
uhci_hcd
usb usb6: SerialNumber:
0000:00:1d.1
usb usb6: configuration #1 chosen from 1
choice
hub 6-0:1.0: USB hub
found
hub 6-0:1.0: 2 ports
detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
uhci_hcd 0000:00:1d.2: setting latency timer to
64
uhci_hcd 0000:00:1d.2: UHCI Host
Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number
7
uhci_hcd 0000:00:1d.2: irq 18, io base
0x00003020
usb usb7: New USB device found, idVendor=1d6b,
idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
usb usb7: Product: UHCI Host
Controller
usb usb7: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64
uhci_hcd
usb usb7: SerialNumber:
0000:00:1d.2
usb usb7: configuration #1 chosen from 1
choice
hub 7-0:1.0: USB hub
found
hub 7-0:1.0: 2 ports
detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq
1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please
boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq
1
mice: PS/2 mouse device common for all
mice
rtc_cmos 00:03: RTC can wake from
S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as
rtc0
rtc0: alarms up to one month, 114 bytes
nvram
device-mapper: uevent: version
1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@...hat.com
cpuidle: using governor
ladder
cpuidle: using governor
menu
usbcore: registered new interface driver
hiddev
usbcore: registered new interface driver
usbhid
usbhid: v2.6:USB HID core
driver
nf_conntrack version 0.5.0 (16384 buckets, 65536
max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable
it.
ip_tables: (C) 2000-2006 Netfilter Core
Team
TCP cubic
registered
Initializing XFRM netlink
socket
NET: Registered protocol family
17
registered taskstats version
1
Magic number:
1:41:51
Initalizing network drop monitor
service
Freeing unused kernel memory: 1304k
freed
Write protecting the kernel read-only data:
1844k
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[drm] Initialized drm 1.1.0
20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
i915 0000:00:02.0: setting latency timer to
64
alloc irq_desc for 27 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
i915 0000:00:02.0: irq 27 for
MSI/MSI-X
usb 6-1: new low speed USB device using uhci_hcd and address
2
usb 6-1: New USB device found, idVendor=046d,
idProduct=c404
usb 6-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
usb 6-1: Product:
Trackball
usb 6-1: Manufacturer:
Logitech
usb 6-1: configuration #1 chosen from 1
choice
allocated 1440x900 fb: 0x007df000, bo
ffff88022cac80c0
Console: switching to colour frame buffer device
180x56
input: Logitech Trackball as
/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input4
[drm] DAC-6: set mode 1440x900
20
fb0: inteldrmfb frame buffer
device
registered panic
notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse
[Logitech Trackball] on
usb-0000:00:1d.1-1/input0
pata_acpi 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
pata_acpi 0000:03:00.0: setting latency timer to
64
pata_acpi 0000:03:00.0: PCI INT A
disabled
EXT3-fs: INFO: recovery required on readonly
filesystem.
EXT3-fs: write access will be enabled during
recovery.
kjournald starting. Commit interval 5
seconds
EXT3-fs: dm-0: orphan cleanup on readonly
fs
ext3_orphan_cleanup: deleting unreferenced inode
14131833
ext3_orphan_cleanup: deleting unreferenced inode
14131239
ext3_orphan_cleanup: deleting unreferenced inode
14131221
ext3_orphan_cleanup: deleting unreferenced inode
14131219
EXT3-fs: dm-0: 4 orphan inodes
deleted
EXT3-fs: recovery
complete.
EXT3-fs: mounted filesystem with ordered data
mode.
SELinux: Disabled at
runtime.
SELinux: Unregistering netfilter
hooks
type=1404 audit(1246925120.432:2): selinux=0 auid=4294967295
ses=4294967295
udev: starting version
141
input: PC Speaker as
/devices/platform/pcspkr/input/input5
e100: Intel(R) PRO/100 Network Driver,
3.5.23-k6-NAPI
e100: Copyright(c) 1999-2006 Intel
Corporation
e100 0000:04:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
e100 0000:04:03.0: PME#
disabled
iTCO_vendor_support:
vendor-support=0
e100: eth0: e100_probe: addr 0xe0021000, irq 17, MAC addr
00:02:b3:36:b8:64
udev: renamed network interface eth0 to
eth1
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ
21
iTCO_wdt: Intel TCO WatchDog Timer Driver
v1.05
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec
(nowayout=0)
e1000e: Intel(R) PRO/1000 Network Driver -
0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel
Corporation.
alloc irq_desc for 20 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
e1000e 0000:00:19.0: setting latency timer to
64
alloc irq_desc for 28 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
e1000e 0000:00:19.0: irq 28 for
MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:af:b3:98
0000:00:19.0: eth0: Intel(R) PRO/1000 Network
Connection
0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No:
ffffff-0ff
alloc irq_desc for 22 on cpu 0 node
0
alloc kstat_irqs on cpu 0 node
0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
HDA Intel 0000:00:1b.0: setting latency timer to
64
hda_codec: Unknown model for ALC883, trying auto-probe from
BIOS...
ALSA sound/pci/hda/hda_codec.c:3507: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3511: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3515: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3516: mono:
mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3524: inputs: mic=0x18, fmic=0x19,
line=0x1a, fline=0x0, cd=0x0, aux=0x0
pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
pata_jmicron 0000:03:00.0: setting latency timer to
64
scsi4 :
pata_jmicron
scsi5 :
pata_jmicron
ata5: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq
18
ata6: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq
18
firewire_ohci 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
firewire_ohci: Added fw-ohci device 0000:04:05.0, OHCI version
1.0
device-mapper: multipath: version 1.0.5
loaded
firewire_core: created device fw0: GUID 00902700024952e9,
S400
EXT3 FS on dm-0, internal
journal
kjournald starting. Commit interval 5
seconds
EXT3 FS on sda1, internal
journal
EXT3-fs: mounted filesystem with ordered data
mode.
swap_cgroup: uses 39936 bytes of vmalloc for pointer array space and
20447232 bytes to hold mem_cgroup pointers on
swap
swap_cgroup can be disabled by noswapaccount boot
option.
Adding 10223608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
extents:1 across:10223608k
platform microcode: firmware: requesting
intel-ucode/06-0f-0b
platform microcode: firmware: requesting
intel-ucode/06-0f-0b
platform microcode: firmware: requesting
intel-ucode/06-0f-0b
platform microcode: firmware: requesting
intel-ucode/06-0f-0b
Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter
Oruba
microcode: CPU0 updated from revision 0x0 to 0xb6, date =
2007-07-13
microcode: CPU1 updated from revision 0x0 to 0xb6, date =
2007-07-13
microcode: CPU2 updated from revision 0x0 to 0xb6, date =
2007-07-13
microcode: CPU3 updated from revision 0x0 to 0xb6, date = 2007-07-13
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
w83627ehf: Found W83627DHG chip at 0x6e0
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
fuse init (API version 7.11)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists