--- pre.dmesg.trimmed	2009-07-09 12:35:10.000000000 -0600
+++ post.dmesg.trimmed	2009-07-09 12:35:17.000000000 -0600
@@ -1,6 +1,6 @@
 Initializing cgroup subsys cpuset
 Initializing cgroup subsys cpu
-Linux version 2.6.25 (dannf@dl585g2) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #68 SMP Thu Jul 9 12:25:31 MDT 2009
+Linux version 2.6.25 (dannf@dl585g2) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #67 SMP Thu Jul 9 12:11:29 MDT 2009
 Command line: root=/dev/disk/by-id/scsi-35000c50000d5ca0f-part1 ro console=tty1 console=ttyS1,115200 
 BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
@@ -65,8 +65,8 @@
   bootmap [000000000002c000 -  000000000005bfff] pages 30
   early res: 0 [0-fff] BIOS data page
   early res: 1 [6000-7fff] TRAMPOLINE
-  early res: 2 [200000-a88afb] TEXT DATA BSS
-  early res: 3 [37d54000-37fef2b8] RAMDISK
+  early res: 2 [200000-a8a97b] TEXT DATA BSS
+  early res: 3 [37d54000-37fef2ed] RAMDISK
   early res: 4 [9e400-fffff] BIOS reserved
   early res: 5 [8000-19fff] PGTABLE
   early res: 6 [1a000-2307f] MEMNODEMAP
@@ -99,8 +99,8 @@
     3:  3670016 ->  4718591
 On node 0 totalpages: 1047789
   DMA zone: 56 pages used for memmap
-  DMA zone: 2313 pages reserved
-  DMA zone: 1629 pages, LIFO batch:0
+  DMA zone: 2315 pages reserved
+  DMA zone: 1627 pages, LIFO batch:0
   DMA32 zone: 14280 pages used for memmap
   DMA32 zone: 505223 pages, LIFO batch:31
   Normal zone: 7168 pages used for memmap
@@ -175,7 +175,7 @@
 SMP: Allowing 8 CPUs, 0 hotplug CPUs
 PERCPU: Allocating 44480 bytes of per cpu data
 NR_CPUS: 64, nr_cpu_ids: 8
-Built 4 zonelists in Zone order, mobility grouping on.  Total pages: 4126692
+Built 4 zonelists in Zone order, mobility grouping on.  Total pages: 4126690
 Policy zone: Normal
 Kernel command line: root=/dev/disk/by-id/scsi-35000c50000d5ca0f-part1 ro console=tty1 console=ttyS1,115200 
 Initializing CPU#0
@@ -183,7 +183,7 @@
 Extended CMOS year: 2000
 TSC calibrated against PM_TIMER
 Marking TSC unstable due to TSCs unsynchronized
-time.c: Detected 2612.039 MHz processor.
+time.c: Detected 2612.040 MHz processor.
 spurious 8259A interrupt: IRQ7.
 Console: colour VGA+ 80x25
 console [tty1] enabled
@@ -197,11 +197,11 @@
 This costs you 64 MB of RAM
 Mapping aperture over 65536 KB of RAM @ 4000000
 PM: Registered nosave memory: 0000000004000000 - 0000000008000000
-Memory: 16466524k/18874364k available (4336k kernel code, 307540k reserved, 2815k data, 404k init)
+Memory: 16466516k/18874364k available (4337k kernel code, 307548k reserved, 2815k data, 408k init)
 CPA: page pool initialized 1 of 1 pages preallocated
 SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=4
 hpet clockevent registered
-Calibrating delay using timer specific routine.. 5226.25 BogoMIPS (lpj=2613125)
+Calibrating delay using timer specific routine.. 5226.24 BogoMIPS (lpj=2613121)
 Security Framework initialized
 SELinux:  Initializing.
 SELinux:  Starting in permissive mode
@@ -220,11 +220,11 @@
 ACPI: Core revision 20070126
 CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Using local APIC timer interrupts.
-APIC timer calibration result 12557872
+APIC timer calibration result 12557873
 Detected 12.557 MHz APIC timer.
 Booting processor 1/2 ip 6000
 Initializing CPU#1
-Calibrating delay using timer specific routine.. 5223.88 BogoMIPS (lpj=2611941)
+Calibrating delay using timer specific routine.. 5223.83 BogoMIPS (lpj=2611917)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 1/2 -> Node 1
@@ -234,7 +234,7 @@
 CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Booting processor 2/4 ip 6000
 Initializing CPU#2
-Calibrating delay using timer specific routine.. 5223.84 BogoMIPS (lpj=2611922)
+Calibrating delay using timer specific routine.. 5223.89 BogoMIPS (lpj=2611947)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 2/4 -> Node 2
@@ -244,7 +244,7 @@
 CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Booting processor 3/6 ip 6000
 Initializing CPU#3
-Calibrating delay using timer specific routine.. 5223.86 BogoMIPS (lpj=2611930)
+Calibrating delay using timer specific routine.. 5223.89 BogoMIPS (lpj=2611949)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 3/6 -> Node 3
@@ -254,7 +254,7 @@
 CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Booting processor 4/1 ip 6000
 Initializing CPU#4
-Calibrating delay using timer specific routine.. 5223.82 BogoMIPS (lpj=2611910)
+Calibrating delay using timer specific routine.. 5223.81 BogoMIPS (lpj=2611905)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 4/1 -> Node 0
@@ -264,7 +264,7 @@
 CPU4: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Booting processor 5/3 ip 6000
 Initializing CPU#5
-Calibrating delay using timer specific routine.. 5223.85 BogoMIPS (lpj=2611926)
+Calibrating delay using timer specific routine.. 5223.87 BogoMIPS (lpj=2611939)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 5/3 -> Node 1
@@ -274,7 +274,7 @@
 CPU5: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Booting processor 6/5 ip 6000
 Initializing CPU#6
-Calibrating delay using timer specific routine.. 5223.87 BogoMIPS (lpj=2611937)
+Calibrating delay using timer specific routine.. 5223.85 BogoMIPS (lpj=2611928)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 6/5 -> Node 2
@@ -284,7 +284,7 @@
 CPU6: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Booting processor 7/7 ip 6000
 Initializing CPU#7
-Calibrating delay using timer specific routine.. 5223.84 BogoMIPS (lpj=2611921)
+Calibrating delay using timer specific routine.. 5223.84 BogoMIPS (lpj=2611923)
 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 CPU: L2 Cache: 1024K (64 bytes/line)
 CPU 7/7 -> Node 3
@@ -293,12 +293,14 @@
 x86: PAT support disabled.
 CPU7: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
 Brought up 8 CPUs
-Total of 8 processors activated (41793.22 BogoMIPS).
+Total of 8 processors activated (41793.25 BogoMIPS).
 khelper used greatest stack depth: 6056 bytes left
 net_namespace: 1176 bytes
-Time: 12:28:07  Date: 07/09/09
+Time: 12:14:05  Date: 07/09/09
 NET: Registered protocol family 16
 No dock devices found.
+TOM: 0000000080000000 aka 2048M
+TOM2: 0000000480000000 aka 18432M
 bus: 00 to node: 00
 bus: 01 to node: 00
 bus: 02 to node: 00
@@ -427,6 +429,17 @@
 bus: 7d to node: 01
 bus: 7e to node: 01
 bus: 7f to node: 01
+bus: [00,3f] on node 0 link 1
+bus: 00 index 0 io port: [0, 2fff]
+bus: 00 index 1 mmio: [80000000, d9efffff]
+bus: 00 index 2 mmio: [dff00000, e3ffffff]
+bus: 00 index 3 mmio: [a0000, bffff]
+bus: 00 index 4 mmio: [e8000000, ffffffff]
+bus: 00 index 5 mmio: [480000000, fbffffffff]
+bus: [40,7f] on node 1 link 2
+bus: 40 index 0 io port: [3000, ffff]
+bus: 40 index 1 mmio: [d9f00000, dfefffff]
+bus: 40 index 2 mmio: [e4000000, e7ffffff]
 ACPI: bus type pci registered
 PCI: Using configuration type 1 for base access
 ACPI: EC: Look up EC in DSDT
@@ -581,7 +594,6 @@
 PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
 hpet0: 3 32-bit timers, 25000000 Hz
-ACPI: RTC can wake from S4
 Switched to high resolution mode on CPU 0
 Switched to high resolution mode on CPU 4
 Switched to high resolution mode on CPU 1
@@ -590,6 +602,7 @@
 Switched to high resolution mode on CPU 6
 Switched to high resolution mode on CPU 3
 Switched to high resolution mode on CPU 7
+ACPI: RTC can wake from S4
 system 00:01: ioport range 0x408-0x40f has been reserved
 system 00:01: ioport range 0x4d0-0x4d1 has been reserved
 system 00:01: ioport range 0x700-0x73f has been reserved
@@ -646,18 +659,18 @@
   IO window: disabled.
   MEM window: disabled.
   PREFETCH window: disabled.
-  got res [88000000:8801ffff] bus [88000000:8801ffff] flags 27200 for BAR 6 of 0000:41:01.0
-  got res [88020000:8803ffff] bus [88020000:8803ffff] flags 27200 for BAR 6 of 0000:41:02.0
+  got res [d9f00000:d9f1ffff] bus [d9f00000:d9f1ffff] flags 27200 for BAR 6 of 0000:41:01.0
+  got res [d9f20000:d9f3ffff] bus [d9f20000:d9f3ffff] flags 27200 for BAR 6 of 0000:41:02.0
 PCI: Bridge: 0000:40:10.0
   IO window: disabled.
   MEM window: 0xda000000-0xddffffff
-  PREFETCH window: 0x0000000088000000-0x00000000880fffff
-  got res [88200000:883fffff] bus [88200000:883fffff] flags 27200 for BAR 6 of 0000:42:01.0
-  got res [88100000:8813ffff] bus [88100000:8813ffff] flags 27200 for BAR 6 of 0000:42:02.0
+  PREFETCH window: 0x00000000d9f00000-0x00000000d9ffffff
+  got res [de000000:de1fffff] bus [de000000:de1fffff] flags 27200 for BAR 6 of 0000:42:01.0
+  got res [de200000:de23ffff] bus [de200000:de23ffff] flags 27200 for BAR 6 of 0000:42:02.0
 PCI: Bridge: 0000:40:11.0
   IO window: 3000-3fff
   MEM window: 0xdfe00000-0xdfefffff
-  PREFETCH window: 0x0000000088100000-0x00000000883fffff
+  PREFETCH window: 0x00000000de000000-0x00000000de2fffff
 PCI: Setting latency timer of device 0000:40:0b.0 to 64
 PCI: Setting latency timer of device 0000:40:0c.0 to 64
 PCI: Setting latency timer of device 0000:40:0d.0 to 64
@@ -681,7 +694,7 @@
 microcode: CPU7 not a capable Intel processor
 IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
 audit: initializing netlink socket (disabled)
-type=2000 audit(1247142486.936:1): initialized
+type=2000 audit(1247141644.906:1): initialized
 Total HugeTLB memory allocated, 0
 VFS: Disk quotas dquot_6.5.1
 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
@@ -986,24 +999,24 @@
 hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 usb usb1: Product: EHCI Host Controller
-usb usb1: Manufacturer: Linux 2.6.25 ehci_hcd
 hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
+usb usb1: Manufacturer: Linux 2.6.25 ehci_hcd
 usb usb1: SerialNumber: 0000:00:02.1
+ehci_hcd 0000:00:02.1: port 6 high speed
+ehci_hcd 0000:00:02.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci_hcd: block sizes: ed 80 td 96
 ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
+ACPI: PCI Interrupt 0000:00:02.0[A] -> <6>usb 1-6: new high speed USB device using ehci_hcd and address 2
 ehci_hcd 0000:00:02.1: port 6 high speed
 ehci_hcd 0000:00:02.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
-ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
-usb 1-6: new high speed USB device using ehci_hcd and address 2
+Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
 PCI: Setting latency timer of device 0000:00:02.0 to 64
 ohci_hcd 0000:00:02.0: OHCI Host Controller
-ehci_hcd 0000:00:02.1: port 6 high speed
-ehci_hcd 0000:00:02.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
+usb 1-6: uevent
 ohci_hcd 0000:00:02.0: created debug files
 ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000
-usb 1-6: uevent
 usb 1-6: usb_probe_device
 usb 1-6: configuration #1 chosen from 1 choice
 usb 1-6: adding 1-6:1.0 (config #1, interface 0)
@@ -1015,6 +1028,16 @@
 hub 1-6:1.0: standalone hub
 hub 1-6:1.0: individual port power switching
 hub 1-6:1.0: individual port over-current protection
+hub 1-6:1.0: TT per port
+hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
+hub 1-6:1.0: Port indicators are supported
+hub 1-6:1.0: power on to power good time: 100ms
+hub 1-6:1.0: local power source is good
+hub 1-6:1.0: enabling power on all ports
+usb 1-6: link qh256-0001/ffff81007f802140 start 255 [1/0 us]
+usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
+usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+hub 1-6:1.0: state 7 ports 4 chg 0000 evt 0000
 ohci_hcd 0000:00:02.0: OHCI controller state
 ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
 ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
@@ -1037,14 +1060,8 @@
 ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
 usb usb2: default language 0x0409
 usb usb2: uevent
-hub 1-6:1.0: TT per port
-hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
-hub 1-6:1.0: Port indicators are supported
-hub 1-6:1.0: power on to power good time: 100ms
 usb usb2: usb_probe_device
 usb usb2: configuration #1 chosen from 1 choice
-hub 1-6:1.0: local power source is good
-hub 1-6:1.0: enabling power on all ports
 usb usb2: adding 2-0:1.0 (config #1, interface 0)
 usb 2-0:1.0: uevent
 hub 2-0:1.0: usb_probe_interface
@@ -1057,10 +1074,6 @@
 hub 2-0:1.0: power on to power good time: 2ms
 hub 2-0:1.0: local power source is good
 hub 2-0:1.0: trying to enable port power on non-switchable hub
-usb 1-6: link qh256-0001/ffff81007f802140 start 255 [1/0 us]
-usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
-usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-hub 1-6:1.0: state 7 ports 4 chg 0000 evt 0000
 hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
@@ -1120,19 +1133,14 @@
 usb 3-1: Manufacturer: HP
 uhci_hcd 0000:01:04.4: port 2 portsc 0083,00
 hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
-ohci_hcd 0000:00:02.0: auto-stop root hub
 hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
+ohci_hcd 0000:00:02.0: auto-stop root hub
 usb 3-2: new full speed USB device using uhci_hcd and address 3
 uhci_hcd 0000:01:04.4: port 2 portsc 0083,00
 hub 3-0:1.0: unable to enumerate USB device on port 2
-hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
-usbcore: registered new interface driver usblp
-Initializing USB Mass Storage driver...
 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
 uhci_hcd 0000:01:04.4: port 2 portsc 0083,00
 hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
-usbcore: registered new interface driver usb-storage
-USB Mass Storage support registered.
 hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
 usb 3-2: new full speed USB device using uhci_hcd and address 4
 usb 3-2: default language 0x0409
@@ -1158,14 +1166,18 @@
 usb 3-2: Manufacturer: HP
 hub 3-2:1.0: state 7 ports 7 chg 0000 evt 0000
 usb 3-2: remote wakeup needed for autosuspend
+usbcore: registered new interface driver usblp
+Initializing USB Mass Storage driver...
+usbcore: registered new interface driver usb-storage
+USB Mass Storage support registered.
 usbcore: registered new interface driver libusual
-PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
 hub 1-6:1.0: hub_suspend
 usb 1-6: unlink qh256-0001/ffff81007f802140 start 255 [1/0 us]
 usb 1-6: usb auto-suspend
 hub 2-0:1.0: hub_suspend
 usb usb2: bus auto-suspend
 ohci_hcd 0000:00:02.0: suspend root hub
+PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
 serio: i8042 KBD port at 0x60,0x64 irq 1
 serio: i8042 AUX port at 0x60,0x64 irq 12
 mice: PS/2 mouse device common for all mice
@@ -1202,10 +1214,10 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 registered taskstats version 1
-  Magic number: 1:878:480
-Freeing unused kernel memory: 404k freed
+  Magic number: 1:122:228
+Freeing unused kernel memory: 408k freed
 Write protecting the kernel read-only data: 6388k
-blacklist used greatest stack depth: 5960 bytes left
+framebuffer used greatest stack depth: 5960 bytes left
 usb usb2: uevent
 usb 2-0:1.0: uevent
 usb usb1: uevent
@@ -1219,7 +1231,7 @@
 usb 3-1:1.1: uevent
 usb 3-2: uevent
 usb 3-2:1.0: uevent
-cdrom_id used greatest stack depth: 5752 bytes left
+cdrom_id used greatest stack depth: 5600 bytes left
 Fusion MPT base driver 3.04.06
 Copyright (c) 1999-2007 LSI Corporation
 Fusion MPT SAS Host driver 3.04.06