linux-kernel - Re: Missing device IDs in rt2870

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 30 Jul 2009 20:37:36 +0200
From:	Jakob Gruber <jakob.gruber@...elnet.at>
To:	Greg KH <gregkh@...e.de>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: Missing device IDs in rt2870

On Wed, 29 Jul 2009 09:16:43 -0700
Greg KH <gregkh@...e.de> wrote:

<snip>
> > 
> > I haven't tested rt2870 in 2.6.30 thoroughly because of this bug
> > (http://bugzilla.kernel.org/show_bug.cgi?id=13638), which forces me to
> > use the driver from the Ralink website instead of the kernel module.
> > However, I can confirm that - until running into the bug - the Belkin
> > card also works in 2.6.30. 
> 
> Ah, that sucks.  I should revert that patch, if you do that, does the
> device work properly for you?

'git revert' didn't work out of the box, and I don't think I'm skilled enough to revert it manually :)
However, I posted some more information at http://bugzilla.kernel.org/show_bug.cgi?id=13638#c9 , including everything.log during the crash.

> 
> > A patch for adding the Belkin device ID is attached. I removed the
> > other 2 IDs from http://bugzilla.kernel.org/show_bug.cgi?id=13459
> > since I do not own these devices and cannot verify them. The ID is
> > only added to the "#ifndef RT30xx" block, same as the patch applied to
> > the Archlinux kernel.
> 
> I'll take the other two ids, now that it makes more sense.
> 
> Care to respin with the 2 new ids, and add a "Signed-off-by:" to the
> patch so I can properly apply it?

Done, patch is attached. 

Thanks again.

-- 
Jakob Gruber <jakob.gruber@...elnet.at>


View attachment "0001-Staging-rt2870-Add-USB-ID-for-Linksys-Planex-Communi.patch" of type "text/plain" (1746 bytes)