[ 0.000000] Linux version 2.6.31-rc5-git3-13-desktop (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT 2009-08-06 23:25:57 +0200 [ 0.000000] Command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] BIOS-e820: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] BIOS-e820: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] BIOS-e820: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] BIOS-e820: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] BIOS-e820: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] BIOS-e820: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] BIOS-e820: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] BIOS-e820: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b7e00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xb6000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b5aa1000 (usable) [ 0.000000] modified: 00000000b5aa1000 - 00000000b5aa7000 (reserved) [ 0.000000] modified: 00000000b5aa7000 - 00000000b5bba000 (usable) [ 0.000000] modified: 00000000b5bba000 - 00000000b5c0f000 (reserved) [ 0.000000] modified: 00000000b5c0f000 - 00000000b5d08000 (usable) [ 0.000000] modified: 00000000b5d08000 - 00000000b5f0f000 (reserved) [ 0.000000] modified: 00000000b5f0f000 - 00000000b5f18000 (usable) [ 0.000000] modified: 00000000b5f18000 - 00000000b5f1f000 (reserved) [ 0.000000] modified: 00000000b5f1f000 - 00000000b5f65000 (usable) [ 0.000000] modified: 00000000b5f65000 - 00000000b5f9f000 (ACPI NVS) [ 0.000000] modified: 00000000b5f9f000 - 00000000b5fe1000 (usable) [ 0.000000] modified: 00000000b5fe1000 - 00000000b5fff000 (ACPI data) [ 0.000000] modified: 00000000b5fff000 - 00000000b6000000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000b6000000 [ 0.000000] 0000000000 - 00b6000000 page 2M [ 0.000000] kernel direct mapping tables up to b6000000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000 [ 0.000000] RAMDISK: 37a98000 - 37fef116 [ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 TOSQCI) [ 0.000000] ACPI: XSDT 00000000b5ff4a00 0007C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000b5fe5000 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000b5fe6000 09F7C (v02 TOSQCI CANTIGA 06040000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000b5f9efc0 00040 [ 0.000000] ACPI: APIC 00000000b5ffed1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000b5ffed86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000b5ffedbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000b5ffedfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000b5ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000b5ffee8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 00000000b5ff4aa4 00196 (v01 SataRe SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000b5fe2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000b000 - 0000000000022fff] [ 0.000000] bootmap [0000000000023000 - 000000000004afff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001c59cb0] TEXT DATA BSS ==> [0001000000 - 0001c59cb0] [ 0.000000] #3 [0037a98000 - 0037fef116] RAMDISK ==> [0037a98000 - 0037fef116] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0001c5a000 - 0001c5a1e4] BRK ==> [0001c5a000 - 0001c5a1e4] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[10] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000b5aa1 [ 0.000000] 0: 0x000b5aa7 -> 0x000b5bba [ 0.000000] 0: 0x000b5c0f -> 0x000b5d08 [ 0.000000] 0: 0x000b5f0f -> 0x000b5f18 [ 0.000000] 0: 0x000b5f1f -> 0x000b5f65 [ 0.000000] 0: 0x000b5f9f -> 0x000b5fe1 [ 0.000000] 0: 0x000b5fff -> 0x000b6000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1006809 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 726391 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b5aa1000 - 00000000b5aa7000 [ 0.000000] PM: Registered nosave memory: 00000000b5bba000 - 00000000b5c0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5d08000 - 00000000b5f0f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f18000 - 00000000b5f1f000 [ 0.000000] PM: Registered nosave memory: 00000000b5f65000 - 00000000b5f9f000 [ 0.000000] PM: Registered nosave memory: 00000000b5fe1000 - 00000000b5fff000 [ 0.000000] PM: Registered nosave memory: 00000000b6000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b6000000 (gap: b6000000:4a000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages at ffff88000564b000, static data 82784 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 988787 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part2 repair=1 resume=/dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 splash=silent elevator=cfq vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff88000568c000 - ffff88000968c000 [ 0.000000] software IO TLB at phys 0x568c000 - 0x968c000 [ 0.000000] Memory: 3885104k/5242880k available (5588k kernel code, 1215644k absent, 142132k reserved, 4405k data, 1004k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2526.452 MHz processor. [ 0.000089] Console: colour dummy device 80x25 [ 0.000091] console [tty0] enabled [ 0.000547] hpet clockevent registered [ 0.000552] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000561] Calibrating delay loop (skipped), value calculated using timer frequency.. 5052.90 BogoMIPS (lpj=2526452) [ 0.007074] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.007185] Security Framework initialized [ 0.007206] AppArmor: AppArmor initialized [ 0.007515] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009793] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011308] Mount-cache hash table entries: 256 [ 0.011495] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.011500] CPU: L2 cache: 3072K [ 0.011505] CPU 0/0x0 -> Node 0 [ 0.011508] CPU: Physical Processor ID: 0 [ 0.011511] CPU: Processor Core ID: 0 [ 0.011515] mce: CPU supports 6 MCE banks [ 0.011524] CPU0: Thermal monitoring enabled (TM2) [ 0.011530] using mwait in idle threads. [ 0.011532] Performance Counters: Core2 events, Intel PMU driver. [ 0.011541] ... version: 2 [ 0.011543] ... bit width: 40 [ 0.011546] ... generic counters: 2 [ 0.011549] ... value mask: 000000ffffffffff [ 0.011552] ... max period: 000000007fffffff [ 0.011555] ... fixed-purpose counters: 3 [ 0.011558] ... counter mask: 0000000700000003 [ 0.012471] ACPI: Core revision 20090521 [ 0.028068] Setting APIC routing to flat [ 0.029313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.039322] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.039993] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 5053.74 BogoMIPS (lpj=2526874) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU 1/0x1 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] CPU1: Thermal monitoring enabled (TM2) [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.111553] CPU1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a [ 0.111581] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.112009] Brought up 2 CPUs [ 0.112009] Total of 2 processors activated (10106.65 BogoMIPS). [ 0.112071] CPU0 attaching sched-domain: [ 0.112073] domain 0: span 0-1 level MC [ 0.112076] groups: 0 1 [ 0.112081] CPU1 attaching sched-domain: [ 0.112082] domain 0: span 0-1 level MC [ 0.112084] groups: 1 0 [ 0.114609] devtmpfs: initialized [ 0.117834] Booting paravirtualized kernel on bare hardware [ 0.118004] regulator: core version 0.5 [ 0.118035] Time: 23:15:13 Date: 08/07/09 [ 0.118091] NET: Registered protocol family 16 [ 0.118217] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.118223] ACPI: bus type pci registered [ 0.118291] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.118296] PCI: Not using MMCONFIG. [ 0.118299] PCI: Using configuration type 1 for base access [ 0.119061] bio: create slab at 0 [ 0.120106] ACPI: EC: Look up EC in DSDT [ 0.126221] ACPI: BIOS _OSI(Linux) query ignored [ 0.128104] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.633002] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.796112] ACPI: Interpreter enabled [ 0.796117] ACPI: (supports S0 S3 S4 S5) [ 0.796143] ACPI: Using IOAPIC for interrupt routing [ 0.796197] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.798923] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.810560] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.817014] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.817019] ACPI: EC: driver started in poll mode [ 0.817448] ACPI: No dock devices found. [ 0.818121] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.818210] pci 0000:00:02.0: reg 10 64bit mmio: [0xf4000000-0xf43fffff] [ 0.818216] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.818220] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.818253] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4400000-0xf44fffff] [ 0.818373] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.818464] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.818555] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] [ 0.818648] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4a04800-0xf4a04bff] [ 0.818713] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.818721] pci 0000:00:1a.7: PME# disabled [ 0.818777] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4800000-0xf4803fff] [ 0.818836] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.818842] pci 0000:00:1b.0: PME# disabled [ 0.818925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.818932] pci 0000:00:1c.0: PME# disabled [ 0.819025] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.819031] pci 0000:00:1c.4: PME# disabled [ 0.819117] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.819123] pci 0000:00:1c.5: PME# disabled [ 0.819198] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.819287] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.819379] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.819471] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4a04c00-0xf4a04fff] [ 0.819538] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.819545] pci 0000:00:1d.7: PME# disabled [ 0.819793] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.819800] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.819808] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.819815] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.819822] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.819829] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4a04000-0xf4a047ff] [ 0.819875] pci 0000:00:1f.2: PME# supported from D3hot [ 0.819881] pci 0000:00:1f.2: PME# disabled [ 0.819921] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.819939] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.820029] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 0.820033] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.820041] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.820113] pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x003fff] [ 0.820123] pci 0000:07:00.0: reg 18 io port: [0x00-0xff] [ 0.820203] pci 0000:07:00.0: supports D1 D2 [ 0.820204] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.820213] pci 0000:07:00.0: PME# disabled [ 0.820289] pci 0000:00:1c.4: bridge io port: [0x00-0xfff] [ 0.820294] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.820301] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.820388] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x001fff] [ 0.820501] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.820510] pci 0000:08:00.0: PME# disabled [ 0.820593] pci 0000:00:1c.5: bridge io port: [0x00-0xfff] [ 0.820598] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.820605] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 0.820647] pci 0000:0a:01.0: reg 10 32bit mmio: [0xff501000-0xff501fff] [ 0.820655] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf4700000-0xf47007ff] [ 0.820702] pci 0000:0a:01.0: supports D1 D2 [ 0.820704] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.820711] pci 0000:0a:01.0: PME# disabled [ 0.820759] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf4700800-0xf47008ff] [ 0.820826] pci 0000:0a:01.2: supports D1 D2 [ 0.820828] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.820835] pci 0000:0a:01.2: PME# disabled [ 0.820883] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf4702000-0xf4702fff] [ 0.820948] pci 0000:0a:01.3: supports D1 D2 [ 0.820950] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.820957] pci 0000:0a:01.3: PME# disabled [ 0.821026] pci 0000:00:1e.0: transparent bridge [ 0.821035] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4700000-0xf47fffff] [ 0.821070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.821226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.821336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.821426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.835123] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.835249] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.835373] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 *6 7 10 12 14 15) [ 0.835496] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.835621] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.835746] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.835870] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.835994] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.836187] SCSI subsystem initialized [ 0.836832] libata version 3.00 loaded. [ 0.836832] usbcore: registered new interface driver usbfs [ 0.836832] usbcore: registered new interface driver hub [ 0.836832] usbcore: registered new device driver usb [ 0.836832] PCI: Using ACPI for IRQ routing [ 0.836832] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 0.836832] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 0.836832] pci 0000:00:1c.0: BAR 15: can't allocate resource [ 0.836832] pci 0000:00:1c.4: BAR 13: can't allocate resource [ 0.836832] pci 0000:00:1c.4: BAR 14: can't allocate resource [ 0.836832] pci 0000:00:1c.4: BAR 15: can't allocate resource [ 0.836832] pci 0000:00:1c.5: BAR 13: can't allocate resource [ 0.836832] pci 0000:00:1c.5: BAR 14: can't allocate resource [ 0.836832] pci 0000:00:1c.5: BAR 15: can't allocate resource [ 0.839028] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.839036] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.843007] Switched to high resolution mode on CPU 0 [ 0.843619] Switched to high resolution mode on CPU 1 [ 0.843711] AppArmor: AppArmor Filesystem Enabled [ 0.845258] pnp: PnP ACPI init [ 0.845268] ACPI: bus type pnp registered [ 0.846503] pnp 00:04: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846510] pnp 00:04: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846516] pnp 00:04: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846522] pnp 00:04: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846527] pnp 00:04: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846533] pnp 00:04: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846538] pnp 00:04: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846544] pnp 00:04: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846549] pnp 00:04: io resource (0x70-0x70) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846555] pnp 00:04: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846560] pnp 00:04: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.846566] pnp 00:04: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling [ 0.847953] pnp: PnP ACPI: found 9 devices [ 0.847957] ACPI: ACPI bus type pnp unregistered [ 0.847968] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.847977] system 00:04: ioport range 0x3e0-0x3e1 has been reserved [ 0.847981] system 00:04: ioport range 0x400-0x47f has been reserved [ 0.847986] system 00:04: ioport range 0x680-0x69f has been reserved [ 0.847990] system 00:04: ioport range 0x480-0x48f has been reserved [ 0.847994] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.847999] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.848003] system 00:04: ioport range 0x1180-0x11ff has been reserved [ 0.848008] system 00:04: ioport range 0x164e-0x164f has been reserved [ 0.848012] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.848020] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.848025] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.848030] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.848034] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.848039] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved [ 0.848043] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.848049] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.852867] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.852872] pci 0000:00:1c.0: IO window: disabled [ 0.852879] pci 0000:00:1c.0: MEM window: disabled [ 0.852886] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.852905] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 0.852910] pci 0000:00:1c.4: IO window: 0x2000-0x2fff [ 0.852918] pci 0000:00:1c.4: MEM window: 0xb6000000-0xb60fffff [ 0.852924] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.852942] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 0.852945] pci 0000:00:1c.5: IO window: disabled [ 0.852952] pci 0000:00:1c.5: MEM window: 0xb6100000-0xb61fffff [ 0.852958] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.852965] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 0.852969] pci 0000:00:1e.0: IO window: disabled [ 0.852976] pci 0000:00:1e.0: MEM window: 0xf4700000-0xf47fffff [ 0.852982] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.852996] alloc irq_desc for 17 on node 0 [ 0.852998] alloc kstat_irqs on node 0 [ 0.853003] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.853012] pci 0000:00:1c.0: setting latency timer to 64 [ 0.853020] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 0.853026] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.853034] pci 0000:00:1c.4: setting latency timer to 64 [ 0.853042] pci 0000:00:1c.5: enabling device (0000 -> 0002) [ 0.853047] alloc irq_desc for 16 on node 0 [ 0.853048] alloc kstat_irqs on node 0 [ 0.853051] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.853059] pci 0000:00:1c.5: setting latency timer to 64 [ 0.853067] pci 0000:00:1e.0: setting latency timer to 64 [ 0.853071] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.853073] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.853076] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 0.853077] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 0.853079] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] [ 0.853081] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff] [ 0.853083] pci_bus 0000:07: resource 1 mem: [0xb6000000-0xb60fffff] [ 0.853085] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff] [ 0.853087] pci_bus 0000:08: resource 0 mem: [0x0-0xfff] [ 0.853089] pci_bus 0000:08: resource 1 mem: [0xb6100000-0xb61fffff] [ 0.853091] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff] [ 0.853094] pci_bus 0000:0a: resource 1 mem: [0xf4700000-0xf47fffff] [ 0.853096] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 0.853098] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.853157] NET: Registered protocol family 2 [ 0.853332] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.854449] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.858108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.858603] TCP: Hash tables configured (established 524288 bind 65536) [ 0.858608] TCP reno registered [ 0.858765] NET: Registered protocol family 1 [ 0.858834] Unpacking initramfs... [ 0.944033] Freeing initrd memory: 5468k freed [ 0.946049] Simple Boot Flag at 0x36 set to 0x1 [ 0.946370] Scanning for low memory corruption every 60 seconds [ 0.946576] audit: initializing netlink socket (disabled) [ 0.946595] type=2000 audit(1249686912.946:1): initialized [ 0.949690] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.949818] VFS: Disk quotas dquot_6.5.2 [ 0.949855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.950001] msgmni has been set to 1899 [ 0.950223] alg: No test for stdrng (krng) [ 0.950261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.950267] io scheduler noop registered [ 0.950270] io scheduler anticipatory registered [ 0.950273] io scheduler deadline registered [ 0.950294] io scheduler cfq registered (default) [ 0.950360] pci 0000:00:02.0: Boot video device [ 0.950662] alloc irq_desc for 24 on node 0 [ 0.950664] alloc kstat_irqs on node 0 [ 0.950677] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.950688] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.950856] alloc irq_desc for 25 on node 0 [ 0.950858] alloc kstat_irqs on node 0 [ 0.950866] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X [ 0.950876] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.951040] alloc irq_desc for 26 on node 0 [ 0.951042] alloc kstat_irqs on node 0 [ 0.951050] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X [ 0.951061] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.951491] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 6144k, total 131008k [ 0.951497] vesafb: mode is 1024x768x16, linelength=2048, pages=84 [ 0.951501] vesafb: scrolling: redraw [ 0.951505] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.951678] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.960651] bootsplash: silentjpeg size 100719 bytes [ 0.971563] bootsplash: ...found (1024x768, 38691 bytes, v3). [ 1.003477] Console: switching to colour frame buffer device 124x44 [ 1.047157] fb0: VESA VGA frame buffer device [ 1.048776] Non-volatile memory driver v1.3 [ 1.048874] Linux agpgart interface v0.103 [ 1.048969] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.049340] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 1.049757] ahci 0000:00:1f.2: version 3.0 [ 1.049774] alloc irq_desc for 19 on node 0 [ 1.049776] alloc kstat_irqs on node 0 [ 1.049784] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.049976] alloc irq_desc for 27 on node 0 [ 1.049978] alloc kstat_irqs on node 0 [ 1.049988] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.050079] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.050266] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems [ 1.050436] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.056048] scsi0 : ahci [ 1.056205] scsi1 : ahci [ 1.056312] scsi2 : ahci [ 1.056415] scsi3 : ahci [ 1.056519] scsi4 : ahci [ 1.056624] scsi5 : ahci [ 1.056824] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27 [ 1.056995] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27 [ 1.057169] ata3: DUMMY [ 1.057226] ata4: DUMMY [ 1.057284] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27 [ 1.059192] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27 [ 1.061181] Fixed MDIO Bus: probed [ 1.063134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.065311] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.067581] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.067584] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.069905] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.076248] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.078700] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.078713] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800 [ 1.091009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.093624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.096353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.099176] usb usb1: Product: EHCI Host Controller [ 1.102058] usb usb1: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop ehci_hcd [ 1.105106] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.108274] usb usb1: configuration #1 chosen from 1 choice [ 1.111492] hub 1-0:1.0: USB hub found [ 1.114741] hub 1-0:1.0: 6 ports detected [ 1.119266] alloc irq_desc for 23 on node 0 [ 1.119268] alloc kstat_irqs on node 0 [ 1.119273] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.122755] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.122759] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.126273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.133818] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.137485] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.137501] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00 [ 1.151010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.154820] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.158643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.162452] usb usb2: Product: EHCI Host Controller [ 1.166258] usb usb2: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop ehci_hcd [ 1.170161] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.174067] usb usb2: configuration #1 chosen from 1 choice [ 1.177902] hub 2-0:1.0: USB hub found [ 1.181634] hub 2-0:1.0: 6 ports detected [ 1.185359] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.189078] uhci_hcd: USB Universal Host Controller Interface driver [ 1.192811] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.196626] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.196630] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.200472] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.204471] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.208510] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.212655] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.216777] usb usb3: Product: UHCI Host Controller [ 1.220974] usb usb3: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd [ 1.225192] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.229502] usb usb3: configuration #1 chosen from 1 choice [ 1.233765] hub 3-0:1.0: USB hub found [ 1.238045] hub 3-0:1.0: 2 ports detected [ 1.243262] alloc irq_desc for 21 on node 0 [ 1.243265] alloc kstat_irqs on node 0 [ 1.243269] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.247543] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.247546] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.251741] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.256020] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.260257] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.264527] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.268840] usb usb4: Product: UHCI Host Controller [ 1.273156] usb usb4: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd [ 1.277510] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.281874] usb usb4: configuration #1 chosen from 1 choice [ 1.286222] hub 4-0:1.0: USB hub found [ 1.290461] hub 4-0:1.0: 2 ports detected [ 1.294701] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.298989] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.298992] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.303227] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.307579] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 1.311873] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.316202] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.320562] usb usb5: Product: UHCI Host Controller [ 1.324876] usb usb5: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd [ 1.329295] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.333764] usb usb5: configuration #1 chosen from 1 choice [ 1.338181] hub 5-0:1.0: USB hub found [ 1.342561] hub 5-0:1.0: 2 ports detected [ 1.346913] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.351278] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.351282] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.355581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.359956] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 1.364298] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.368719] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.373277] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.373351] usb usb6: Product: UHCI Host Controller [ 1.373352] usb usb6: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd [ 1.373354] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.373406] usb usb6: configuration #1 chosen from 1 choice [ 1.373438] hub 6-0:1.0: USB hub found [ 1.373444] hub 6-0:1.0: 2 ports detected [ 1.404049] ata5: SATA link down (SStatus 0 SControl 300) [ 1.408375] ata6: SATA link down (SStatus 0 SControl 300) [ 1.412599] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.416835] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.417718] ACPI Warning: \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 [ 1.417725] ata1.00: _GTF unexpected object type 0x1 [ 1.434519] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33 [ 1.434522] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.434539] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.434542] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.434552] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.434583] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 1.434619] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.434621] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.434622] usb usb7: Product: UHCI Host Controller [ 1.434624] usb usb7: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd [ 1.434625] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.434689] usb usb7: configuration #1 chosen from 1 choice [ 1.434713] hub 7-0:1.0: USB hub found [ 1.434718] hub 7-0:1.0: 2 ports detected [ 1.454194] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100 [ 1.454196] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.502931] alloc irq_desc for 18 on node 0 [ 1.502933] alloc kstat_irqs on node 0 [ 1.502938] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.503763] ata1.00: _GTF unexpected object type 0x1 [ 1.505439] ata1.00: configured for UDMA/100 [ 1.505545] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5 [ 1.505705] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.505746] sd 0:0:0:0: [sda] Write Protect is off [ 1.505748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.505769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.505884] sda: [ 1.505936] ata2.00: configured for UDMA/33 [ 1.544577] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.544580] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.549286] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 1.549289] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.549327] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 1.549365] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.549366] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.549368] usb usb8: Product: UHCI Host Controller [ 1.549369] usb usb8: Manufacturer: Linux 2.6.31-rc5-git3-13-desktop uhci_hcd [ 1.549371] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.549431] usb usb8: configuration #1 chosen from 1 choice [ 1.549455] hub 8-0:1.0: USB hub found [ 1.549463] hub 8-0:1.0: 2 ports detected [ 1.559520] sda1 sda2 [ 1.566029] Initializing USB Mass Storage driver... [ 1.566068] usbcore: registered new interface driver usb-storage [ 1.566070] USB Mass Storage support registered. [ 1.566104] usbcore: registered new interface driver libusual [ 1.566115] usbcore: registered new interface driver ums-alauda [ 1.566125] usbcore: registered new interface driver ums-cypress [ 1.566136] usbcore: registered new interface driver ums-datafab [ 1.566146] usbcore: registered new interface driver ums-freecom [ 1.566158] usbcore: registered new interface driver ums-isd200 [ 1.566168] usbcore: registered new interface driver ums-jumpshot [ 1.566177] usbcore: registered new interface driver ums-karma [ 1.566188] usbcore: registered new interface driver ums-onetouch [ 1.566198] usbcore: registered new interface driver ums-sddr09 [ 1.566208] usbcore: registered new interface driver ums-sddr55 [ 1.566218] usbcore: registered new interface driver ums-usbat [ 1.566258] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.566269] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.568639] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.570912] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.570917] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.570920] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.570922] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.570924] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.570987] mice: PS/2 mouse device common for all mice [ 1.571095] rtc_cmos 00:05: RTC can wake from S4 [ 1.571132] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.571164] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.571174] cpuidle: using governor ladder [ 1.571176] cpuidle: using governor menu [ 1.571401] usbcore: registered new interface driver hiddev [ 1.571414] usbcore: registered new interface driver usbhid [ 1.571416] usbhid: v2.6:USB HID core driver [ 1.727963] TCP cubic registered [ 1.731058] NET: Registered protocol family 10 [ 1.734489] lo: Disabled Privacy Extensions [ 1.737769] lib80211: common routines for IEEE802.11 drivers [ 1.740811] lib80211_crypt: registered algorithm 'NULL' [ 1.740897] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK3252GSX_Z86CSPDUS-part1 [ 1.741136] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.744169] ata2: irq_stat 0x40000001 [ 1.747133] ata2: hard resetting link [ 1.755909] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.760433] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606 [ 1.763572] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.766770] usb 1-1: Product: USB2.0 Hub [ 1.769992] usb 1-1: configuration #1 chosen from 1 choice [ 1.773458] hub 1-1:1.0: USB hub found [ 1.776935] hub 1-1:1.0: 4 ports detected [ 1.935012] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.193148] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03 [ 2.196409] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.199750] usb 2-1: Product: 802.11 bg WLAN [ 2.203116] usb 2-1: Manufacturer: Ralink [ 2.206565] usb 2-1: configuration #1 chosen from 1 choice [ 2.312016] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 2.443953] usb 2-4: New USB device found, idVendor=04f2, idProduct=b008 [ 2.447658] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.451434] usb 2-4: Product: Chicony USB 2.0 Camera [ 2.455332] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 2.459245] usb 2-4: SerialNumber: SN0001 [ 2.463227] usb 2-4: configuration #1 chosen from 1 choice [ 2.473269] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.480889] ata2.00: configured for UDMA/33 [ 2.486254] ata2: EH complete [ 2.502762] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5 [ 2.506840] PM: Resume from disk failed. [ 2.506856] registered taskstats version 1 [ 2.510920] Magic number: 5:697:301 [ 2.514948] tty tty30: hash matches [ 2.519057] rtc_cmos 00:05: setting system clock to 2009-08-07 23:15:15 UTC (1249686915) [ 2.523343] Freeing unused kernel memory: 1004k freed [ 2.527793] Write protecting the kernel read-only data: 8848k [ 2.573378] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found [ 2.588181] udevd version 128 started [ 2.622150] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 [ 2.660391] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 [ 2.681029] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 2.848867] usb 3-2: New USB device found, idVendor=046d, idProduct=c50a [ 2.853513] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.858086] usb 3-2: Product: USB Receiver [ 2.862653] usb 3-2: Manufacturer: Logitech [ 2.867231] usb 3-2: configuration #1 chosen from 1 choice [ 2.891171] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 [ 2.896005] generic-usb 0003:046D:C50A.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 [ 2.953569] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 2.953572] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.953576] PM: Marking nosave pages: 00000000b5aa1000 - 00000000b5aa7000 [ 2.953579] PM: Marking nosave pages: 00000000b5bba000 - 00000000b5c0f000 [ 2.953582] PM: Marking nosave pages: 00000000b5d08000 - 00000000b5f0f000 [ 2.953596] PM: Marking nosave pages: 00000000b5f18000 - 00000000b5f1f000 [ 2.953598] PM: Marking nosave pages: 00000000b5f65000 - 00000000b5f9f000 [ 2.953601] PM: Marking nosave pages: 00000000b5fe1000 - 00000000b5fff000 [ 2.953604] PM: Marking nosave pages: 00000000b6000000 - 0000000100000000 [ 2.955202] PM: Basic memory bitmaps created [ 2.971913] PM: Basic memory bitmaps freed [ 2.977495] PM: Starting manual resume from disk [ 2.977497] PM: Resume from partition 8:1 [ 2.977498] PM: Checking hibernation image. [ 2.977717] PM: Resume from disk failed. [ 2.980590] usb 1-1.1: new high speed USB device using ehci_hcd and address 4 [ 3.097353] usb 1-1.1: New USB device found, idVendor=059b, idProduct=0370 [ 3.102941] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.108529] usb 1-1.1: Product: External HD [ 3.114077] usb 1-1.1: Manufacturer: Iomega [ 3.119592] usb 1-1.1: SerialNumber: 152000000733 [ 3.125171] usb 1-1.1: configuration #1 chosen from 1 choice [ 3.132313] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.138694] usb-storage: device found at 4 [ 3.138697] usb-storage: waiting for device to settle before scanning [ 3.202253] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 3.294394] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1001 [ 3.299944] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.305518] usb 1-1.2: Product: External HDD [ 3.311087] usb 1-1.2: Manufacturer: Western Digital [ 3.316594] usb 1-1.2: SerialNumber: 574341505732323139323037 [ 3.322115] usb 1-1.2: configuration #1 chosen from 1 choice [ 3.327728] scsi7 : SCSI emulation for USB Mass Storage devices [ 3.335092] usb-storage: device found at 5 [ 3.335096] usb-storage: waiting for device to settle before scanning [ 3.398292] usb 1-1.4: new high speed USB device using ehci_hcd and address 6 [ 3.487417] kjournald starting. Commit interval 15 seconds [ 3.493471] EXT3 FS on sda2, internal journal [ 3.499331] EXT3-fs: mounted filesystem with ordered data mode. [ 3.505811] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606 [ 3.511654] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.517449] usb 1-1.4: Product: USB2.0 Hub [ 3.523241] usb 1-1.4: configuration #1 chosen from 1 choice [ 3.529365] hub 1-1.4:1.0: USB hub found [ 3.535316] hub 1-1.4:1.0: 4 ports detected [ 3.816260] usb 1-1.4.2: new high speed USB device using ehci_hcd and address 7 [ 3.901026] usb 1-1.4.2: New USB device found, idVendor=05e3, idProduct=070e [ 3.906763] usb 1-1.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 3.912396] usb 1-1.4.2: Product: USB Storage [ 3.917839] usb 1-1.4.2: SerialNumber: 000000009601 [ 3.923251] usb 1-1.4.2: configuration #1 chosen from 1 choice [ 3.929113] scsi8 : SCSI emulation for USB Mass Storage devices [ 3.934363] usb-storage: device found at 7 [ 3.934365] usb-storage: waiting for device to settle before scanning [ 4.007301] usb 1-1.4.3: new high speed USB device using ehci_hcd and address 8 [ 4.097941] usb 1-1.4.3: New USB device found, idVendor=03f0, idProduct=5611 [ 4.103090] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.108171] usb 1-1.4.3: Product: Photosmart C3100 series [ 4.113203] usb 1-1.4.3: Manufacturer: HP [ 4.118112] usb 1-1.4.3: SerialNumber: MY68SC52KM04P9 [ 4.123092] usb 1-1.4.3: configuration #1 chosen from 1 choice [ 4.128279] scsi9 : SCSI emulation for USB Mass Storage devices [ 4.133019] usb-storage: device found at 8 [ 4.133021] usb-storage: waiting for device to settle before scanning [ 4.141850] scsi 6:0:0:0: Direct-Access ST336032 0AS PQ: 0 ANSI: 2 [ 4.147459] sd 6:0:0:0: [sdb] 703282608 512-byte logical blocks: (360 GB/335 GiB) [ 4.147606] usb-storage: device scan complete [ 4.154458] sd 6:0:0:0: [sdb] Write Protect is off [ 4.159090] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 4.159092] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4.166961] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4.171599] sdb: [ 4.210344] usb 1-1.4.4: new high speed USB device using ehci_hcd and address 9 [ 4.334885] scsi 7:0:0:0: Direct-Access WD 5000AAJ External 1.06 PQ: 0 ANSI: 0 [ 4.340631] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.346255] sd 7:0:0:0: [sdc] Write Protect is off [ 4.350988] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4.350990] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.351343] usb-storage: device scan complete [ 4.357125] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.361786] sdc: sdc1 [ 4.368379] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 4.373105] usb 1-1.4.4: New USB device found, idVendor=0402, idProduct=5621 [ 4.377871] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 4.379256] sd 7:0:0:0: [sdc] Attached SCSI disk [ 4.387184] usb 1-1.4.4: Product: USB 2.0 Storage Device [ 4.391683] usb 1-1.4.4: SerialNumber: 00042222200000014305 [ 4.396198] usb 1-1.4.4: configuration #1 chosen from 1 choice [ 4.400831] scsi10 : SCSI emulation for USB Mass Storage devices [ 4.405308] usb-storage: device found at 9 [ 4.405309] usb-storage: waiting for device to settle before scanning [ 4.935143] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.940640] scsi 8:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.947134] scsi 8:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.952002] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 4.956887] sd 8:0:0:1: [sde] Attached SCSI removable disk [ 4.962521] scsi 8:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0 [ 4.968607] sd 8:0:0:2: [sdf] Attached SCSI removable disk [ 4.973274] sd 8:0:0:3: [sdg] Attached SCSI removable disk [ 4.977676] usb-storage: device scan complete [ 5.132685] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [ 5.138803] usb-storage: device scan complete [ 5.138945] sd 9:0:0:0: [sdh] Attached SCSI removable disk [ 5.406120] scsi 10:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS09 PQ: 0 ANSI: 0 [ 5.410805] usb-storage: device scan complete [ 6.577369] sdb1 [ 6.585110] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 6.589589] sd 6:0:0:0: [sdb] Attached SCSI disk [ 6.785886] udevd version 128 started [ 7.353224] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.357860] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.362542] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 7.424051] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 7.428613] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 7.433196] sd 8:0:0:1: Attached scsi generic sg5 type 0 [ 7.437644] sd 8:0:0:2: Attached scsi generic sg6 type 0 [ 7.442086] sd 8:0:0:3: Attached scsi generic sg7 type 0 [ 7.446366] sd 9:0:0:0: Attached scsi generic sg8 type 0 [ 7.450695] scsi 10:0:0:0: Attached scsi generic sg9 type 5 [ 7.489366] usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [ 7.493642] usbcore: registered new interface driver usblp [ 7.520873] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 7.696713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.701099] ACPI: Power Button [PWRF] [ 7.702073] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.702076] Uniform CD-ROM driver Revision: 3.20 [ 7.702171] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.715315] iTCO_vendor_support: vendor-support=0 [ 7.715439] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 7.715511] ACPI: Power Button [PWRB] [ 7.715556] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6 [ 7.715771] ACPI: Lid Switch [LID] [ 7.745502] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 7.750494] sr 10:0:0:0: Attached scsi CD-ROM sr1 [ 7.765068] ACPI: WMI: Mapper loaded [ 7.773302] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 7.778278] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] [ 7.783444] ACPI: Device needs an ACPI driver [ 7.788456] i801_smbus: probe of 0000:00:1f.3 failed with error -16 [ 7.798448] ACPI: AC Adapter [ACAD] (on-line) [ 7.878413] sky2 driver version 1.23 [ 7.884402] sky2 0000:07:00.0: enabling device (0000 -> 0003) [ 7.889483] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.894502] sky2 0000:07:00.0: setting latency timer to 64 [ 7.894555] sky2 0000:07:00.0: unsupported chip type 0xff [ 7.899554] sky2 0000:07:00.0: PCI INT A disabled [ 7.904379] sky2: probe of 0000:07:00.0 failed with error -95 [ 7.913789] ACPI: SSDT 00000000b5f1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 7.919838] ACPI: SSDT 00000000b5f18620 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 7.927350] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 7.935721] Monitor-Mwait will be used to enter C-1 state [ 7.937017] Monitor-Mwait will be used to enter C-2 state [ 7.939037] Monitor-Mwait will be used to enter C-3 state [ 7.939044] Marking TSC unstable due to TSC halts in idle [ 7.944211] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 7.950115] processor LNXCPU:00: registered as cooling_device0 [ 7.955105] ACPI: Processor [CPU0] (supports 8 throttling states) [ 7.960757] ACPI: SSDT 00000000b5f19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109) [ 7.966558] ACPI: SSDT 00000000b5f19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 7.972375] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 7.978824] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 7.983940] processor LNXCPU:01: registered as cooling_device1 [ 7.988989] ACPI: Processor [CPU1] (supports 8 throttling states) [ 7.996325] cfg80211: Calling CRDA to update world regulatory domain [ 8.065169] thermal LNXTHERM:01: registered as thermal_zone0 [ 8.070493] ACPI: Thermal Zone [THRM] (53 C) [ 8.078533] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 8.084850] agpgart-intel 0000:00:00.0: detected 131068K stolen memory [ 8.092440] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 8.389786] Linux video capture interface: v2.00 [ 8.399668] cfg80211: World regulatory domain updated: [ 8.404999] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.410299] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.413705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 8.420786] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 8.426635] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.500035] Clocksource tsc unstable (delta = -274372625 ns) [ 8.524317] ACPI: Battery Slot [BAT1] (battery present) [ 8.566601] sdhci: Secure Digital Host Controller Interface driver [ 8.571769] sdhci: Copyright(c) Pierre Ossman [ 8.599024] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.634749] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 8.644560] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7 [ 8.650067] usbcore: registered new interface driver uvcvideo [ 8.655220] USB Video Class driver (v0.1.0) [ 8.661457] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 8.674920] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) [ 8.680754] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.686465] mmc0: Unknown controller version (2). You may experience problems. [ 8.692107] Registered led device: mmc0:: [ 8.697860] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA [ 8.857709] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds [ 8.863357] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 8.875763] iwlagn 0000:08:00.0: enabling device (0000 -> 0002) [ 8.881477] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.887083] iwlagn 0000:08:00.0: setting latency timer to 64 [ 8.887128] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0xFDFFFFFF [ 8.892723] alloc irq_desc for 22 on node 0 [ 8.892726] alloc kstat_irqs on node 0 [ 8.892733] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.898342] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.013211] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.019021] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.024613] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.073995] iwlagn 0000:08:00.0: Failed, HW not ready [ 9.080292] iwlagn 0000:08:00.0: PCI INT A disabled [ 9.103364] phy0: Selected rate control algorithm 'minstrel' [ 9.103868] Registered led device: rt73usb-phy0::radio [ 9.109388] Registered led device: rt73usb-phy0::assoc [ 9.115034] Registered led device: rt73usb-phy0::quality [ 9.120942] usbcore: registered new interface driver rt73usb [ 9.128912] wlan0 renamed to wlan1 by udevd [1754] [ 9.134740] udev: renamed network interface wlan0 to wlan1 [ 9.932990] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240001542c7b] [ 10.022653] Adding 4200956k swap on /dev/sda1. Priority:-1 extents:1 across:4200956k [ 11.147966] device-mapper: uevent: version 1.0.3 [ 11.153623] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 11.558144] loop: module loaded [ 11.786914] fuse init (API version 7.12) [ 14.837032] type=1505 audit(1249683327.805:2): operation="profile_load" pid=2108 name=/bin/ping [ 14.860303] type=1505 audit(1249683327.829:3): operation="profile_load" pid=2109 name=/sbin/klogd [ 15.589761] type=1505 audit(1249683328.558:4): operation="profile_load" pid=2110 name=/sbin/syslog-ng [ 15.655031] type=1505 audit(1249683328.623:5): operation="profile_load" pid=2111 name=/sbin/syslogd [ 15.699478] type=1505 audit(1249683328.667:6): operation="profile_load" pid=2112 name=/usr/sbin/avahi-daemon [ 15.739613] type=1505 audit(1249683328.708:7): operation="profile_load" pid=2113 name=/usr/sbin/identd [ 15.781706] type=1505 audit(1249683328.749:8): operation="profile_load" pid=2114 name=/usr/sbin/mdnsd [ 15.836617] type=1505 audit(1249683328.805:9): operation="profile_load" pid=2119 name=/usr/sbin/nscd [ 15.899576] type=1505 audit(1249683328.867:10): operation="profile_load" pid=2146 name=/usr/sbin/ntpd [ 15.954324] type=1505 audit(1249683328.923:11): operation="profile_load" pid=2153 name=/usr/sbin/traceroute [ 32.914365] [drm] Initialized drm 1.1.0 20060810 [ 32.960780] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 32.960785] pci 0000:00:02.0: setting latency timer to 64 [ 32.975764] alloc irq_desc for 28 on node 0 [ 32.975768] alloc kstat_irqs on node 0 [ 32.975778] pci 0000:00:02.0: irq 28 for MSI/MSI-X [ 33.039449] acpi device:05: registered as cooling_device2 [ 33.040015] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input11 [ 33.040140] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 33.040220] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 33.417008] CE: hpet increasing min_delta_ns to 15000 nsec [ 36.846635] Bluetooth: Core ver 2.15 [ 36.847428] NET: Registered protocol family 31 [ 36.847431] Bluetooth: HCI device and connection manager initialized [ 36.847434] Bluetooth: HCI socket layer initialized [ 37.267318] Bluetooth: L2CAP ver 2.13 [ 37.267320] Bluetooth: L2CAP socket layer initialized [ 37.385433] Bluetooth: RFCOMM TTY layer initialized [ 37.385437] Bluetooth: RFCOMM socket layer initialized [ 37.385439] Bluetooth: RFCOMM ver 1.11 [ 38.306519] Bluetooth: SCO (Voice Link) ver 0.6 [ 38.306527] Bluetooth: SCO socket layer initialized [ 39.205272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 39.205275] Bluetooth: BNEP filters: protocol multicast [ 39.528399] Bridge firewalling registered [ 46.515904] rt73usb 2-1:1.0: firmware: requesting rt73.bin [ 47.368717] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 47.451725] NET: Registered protocol family 17 [ 48.201554] bootsplash: status on console 0 changed to on [ 55.246915] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 151.582393] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 155.806904] kjournald starting. Commit interval 15 seconds [ 155.806926] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 155.808190] EXT3 FS on sdc1, internal journal [ 155.808197] EXT3-fs: mounted filesystem with ordered data mode. [ 155.947629] kjournald starting. Commit interval 15 seconds [ 155.948751] EXT3 FS on sdb1, internal journal [ 155.948766] EXT3-fs: mounted filesystem with ordered data mode. [ 201.168353] usb 2-1: USB disconnect, address 2 [ 201.168746] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. [ 201.168756] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. [ 201.168766] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. [ 201.168775] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. [ 201.168785] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. [ 201.168802] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 201.168963] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 201.169026] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 201.169093] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 208.217129] usb 2-1: new high speed USB device using ehci_hcd and address 4 [ 208.473618] usb 2-1: New USB device found, idVendor=07d1, idProduct=3c03 [ 208.473628] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 208.473635] usb 2-1: Product: 802.11 bg WLAN [ 208.473640] usb 2-1: Manufacturer: Ralink [ 208.473901] usb 2-1: configuration #1 chosen from 1 choice [ 208.738971] phy2: Selected rate control algorithm 'minstrel' [ 208.740773] Registered led device: rt73usb-phy2::radio [ 208.740822] Registered led device: rt73usb-phy2::assoc [ 208.740860] Registered led device: rt73usb-phy2::quality [ 208.744327] wlan0 renamed to wlan1 by udevd [4796] [ 208.746238] udev: renamed network interface wlan0 to wlan1 [ 212.836842] rt73usb 2-1:1.0: firmware: requesting rt73.bin [ 212.932183] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 270.352692] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 272.366404] wlan1: authenticate with AP 00:16:01:ad:e4:c0 [ 272.367987] wlan1: authenticated [ 272.367995] wlan1: associate with AP 00:16:01:ad:e4:c0 [ 272.370404] wlan1: RX AssocResp from 00:16:01:ad:e4:c0 (capab=0x431 status=0 aid=1) [ 272.370412] wlan1: associated [ 272.390721] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 282.696064] wlan1: no IPv6 routers present