| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 16 Aug 2009 15:04:25 -0700
From: Greg KH <greg@...ah.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: linux-kernel@...r.kernel.org,
Soeren Sonnenburg <bugreports@....de>,
Jérémie Huchet <jeremie@...ah.info>
Subject: Re: [PATCH] Samsung backlight driver
On Sat, Aug 15, 2009 at 12:15:50AM -0700, Dmitry Torokhov wrote:
> On Fri, Aug 14, 2009 at 03:48:35PM -0700, Greg KH wrote:
> > Here's an updated version, with two more laptop models supported, and
> > the comments from Dmitry added in.
> >
>
> You are leaking pci device reference in error unwinding path....
>
> Here you go, just fold it together with yours.
Thank you very much for the patch, I appreciate it.
Jérémie, I've now added the pci id for your device, so the driver should
now work for it as well. Let me know if you have any problems with it.
I've included an updated version below that also adds support for the
N120 laptop series.
thanks,
greg k-h
-----------------------
From: Greg Kroah-Hartman <gregkh@...e.de>
Subject: Samsung backlight driver
This driver implements backlight controls for Samsung laptops that
currently do not have ACPI support for this control.
It has been tested on the N130 laptop and properly works there.
Info for the NC10 was provided by Soeren Sonnenburg <bugreports@....de>
Info for the NP-Q45 from Jérémie Huchet <jeremie@...ah.info>
Many thanks to Dmitry Torokhov <dmitry.torokhov@...il.com> for cleanups
and other suggestions on how to make the driver simpler.
Cc: Soeren Sonnenburg <bugreports@....de>
Cc: Jérémie Huchet <jeremie@...ah.info>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/platform/x86/Kconfig | 12 ++
drivers/platform/x86/Makefile | 1
drivers/platform/x86/samsung-backlight.c | 157 +++++++++++++++++++++++++++++++
3 files changed, 170 insertions(+)
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -425,4 +425,16 @@ config ACPI_TOSHIBA
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
+
+config SAMSUNG_BACKLIGHT
+ tristate "Samsung Backlight driver"
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on DMI
+ ---help---
+ This driver adds support to control the backlight on a number of
+ Samsung laptops, like the N130.
+
+ It will only be loaded on laptops that properly need it, so it is
+ safe to say Y here.
+
endif # X86_PLATFORM_DEVICES
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_INTEL_MENLOW) += intel_menl
obj-$(CONFIG_ACPI_WMI) += wmi.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
+obj-$(CONFIG_SAMSUNG_BACKLIGHT) += samsung-backlight.o
--- /dev/null
+++ b/drivers/platform/x86/samsung-backlight.c
@@ -0,0 +1,157 @@
+/*
+ * Samsung N130 and NC10 Laptop Backlight driver
+ *
+ * Copyright (C) 2009 Greg Kroah-Hartman (gregkh@...e.de)
+ * Copyright (C) 2009 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/dmi.h>
+
+#define MAX_BRIGHT 0xff
+#define OFFSET 0xf4
+
+static int offset = OFFSET;
+module_param(offset, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(offset, "The offset into the PCI device for the brightness control");
+
+static struct pci_dev *pci_device;
+static struct backlight_device *backlight_device;
+
+static u8 read_brightness(void)
+{
+ u8 brightness;
+
+ pci_read_config_byte(pci_device, offset, &brightness);
+ return brightness;
+}
+
+static void set_brightness(u8 brightness)
+{
+ pci_write_config_byte(pci_device, offset, brightness);
+}
+
+static int get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int update_status(struct backlight_device *bd)
+{
+ set_brightness(bd->props.brightness);
+ return 0;
+}
+
+static struct backlight_ops backlight_ops = {
+ .get_brightness = get_brightness,
+ .update_status = update_status,
+};
+
+static int __init dmi_check_cb(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO KBUILD_MODNAME ": found laptop model '%s'\n",
+ id->ident);
+ return 0;
+}
+
+static struct dmi_system_id __initdata samsung_dmi_table[] = {
+ {
+ .ident = "N120",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N120"),
+ DMI_MATCH(DMI_BOARD_NAME, "N120"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "N130",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N130"),
+ DMI_MATCH(DMI_BOARD_NAME, "N130"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "NC10",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC10"),
+ },
+ .callback = dmi_check_cb,
+ },
+ {
+ .ident = "NP-Q45",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+ DMI_MATCH(DMI_BOARD_NAME, "SQ45S70S"),
+ },
+ .callback = dmi_check_cb,
+ },
+ { },
+};
+
+static int __init samsung_init(void)
+{
+ if (!dmi_check_system(samsung_dmi_table))
+ return -ENODEV;
+
+ /*
+ * The Samsung N120, N130, and NC10 use pci device id 0x27ae, while the
+ * NP-Q45 uses 0x2a02. Odds are we might need to add more to the
+ * list over time...
+ */
+ pci_device = pci_get_device(PCI_VENDOR_ID_INTEL, 0x27ae, NULL);
+ if (!pci_device) {
+ pci_device = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2a02, NULL);
+ if (!pci_device)
+ return -ENODEV;
+ }
+
+ /* create a backlight device to talk to this one */
+ backlight_device = backlight_device_register("samsung",
+ &pci_device->dev,
+ NULL, &backlight_ops);
+ if (IS_ERR(backlight_device)) {
+ pci_dev_put(pci_device);
+ return PTR_ERR(backlight_device);
+ }
+
+ backlight_device->props.max_brightness = MAX_BRIGHT;
+ backlight_device->props.brightness = read_brightness();
+ backlight_device->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(backlight_device);
+
+ return 0;
+}
+
+static void __exit samsung_exit(void)
+{
+ backlight_device_unregister(backlight_device);
+
+ /* we are done with the PCI device, put it back */
+ pci_dev_put(pci_device);
+}
+
+module_init(samsung_init);
+module_exit(samsung_exit);
+
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@...e.de>");
+MODULE_DESCRIPTION("Samsung Backlight driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*:svnSAMSUNGELECTRONICSCO.,LTD.:pnN120:*:rnN120:*");
+MODULE_ALIAS("dmi:*:svnSAMSUNGELECTRONICSCO.,LTD.:pnN130:*:rnN130:*");
+MODULE_ALIAS("dmi:*:svnSAMSUNGELECTRONICSCO.,LTD.:pnNC10:*:rnNC10:*");
+MODULE_ALIAS("dmi:*:svnSAMSUNGELECTRONICSCO.,LTD.:pnSQ45S70S:*:rnSQ45S70S:*");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists