| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 6 Oct 2009 21:02:37 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes and updates, updated
On Tue, Oct 06, 2009 at 12:59:49AM -0400, Jeff Garzik wrote:
> 1) ahci: fixes for AMD/ATI SB600 and Aspire 3810T platforms
>
> 2) ahci: print out more nifty hardware info at startup
>
> 3) A patch from Dirk! Thou shalt not "blit" about the tree,
> apparently. :)
Appended two more sets of fixes onto the same branch:
4) Bart's pata_atp867x fixes, for the recently-added pata_atp867x
5) link online fix from Tejun
If you already pulled via last night's pull request, you will only
get the new stuff (#4, #5). Otherwise, you will get all commits listed
below.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 193 ++++++++++++++++++++++++++++++--------------
drivers/ata/libata-acpi.c | 40 +++++-----
drivers/ata/libata-core.c | 3 +
drivers/ata/libata-eh.c | 50 +++++++----
drivers/ata/libata.h | 2 +
drivers/ata/pata_ali.c | 2 +-
drivers/ata/pata_atp867x.c | 101 ++++++++++++++++-------
include/linux/ata.h | 9 ++-
include/linux/libata.h | 12 +++
9 files changed, 280 insertions(+), 132 deletions(-)
Bartlomiej Zolnierkiewicz (3):
pata_atp867x: fix it to not claim MWDMA support
pata_atp867x: PIO support fixes
pata_atp867x: add Power Management support
Dirk Hohndel (1):
pata_ali: trivial fix of a very frequent spelling mistake
John(Jung-Ik) Lee (1):
pata_atp867x: clarifications in timings calculations and cable detection
Robert Hancock (1):
ahci: display all AHCI 1.3 HBA capability flags (v2)
Tejun Heo (6):
ahci: disable 64bit DMA by default on SB600s
libata: cosmetic updates
libata: implement more acpi filtering options
libata: make gtf_filter per-dev
ahci: filter FPDMA non-zero offset enable for Aspire 3810T
libata: fix incorrect link online check during probe
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index acd1162..4edca6e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -122,6 +122,7 @@ enum {
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
HOST_EM_LOC = 0x1c, /* Enclosure Management location */
HOST_EM_CTL = 0x20, /* Enclosure Management Control */
+ HOST_CAP2 = 0x24, /* host capabilities, extended */
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
@@ -129,16 +130,29 @@ enum {
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
/* HOST_CAP bits */
+ HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
- HOST_CAP_SSC = (1 << 14), /* Slumber capable */
+ HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
+ HOST_CAP_PART = (1 << 13), /* Partial state capable */
+ HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
+ HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
+ HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
+ HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_LED = (1 << 25), /* Supports activity LED */
HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+ /* HOST_CAP2 bits */
+ HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
+ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
+ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
+
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
@@ -267,8 +281,10 @@ struct ahci_em_priv {
struct ahci_host_priv {
unsigned int flags; /* AHCI_HFLAG_* */
u32 cap; /* cap to use */
+ u32 cap2; /* cap2 to use */
u32 port_map; /* port map to use */
u32 saved_cap; /* saved initial cap */
+ u32 saved_cap2; /* saved initial cap2 */
u32 saved_port_map; /* saved initial port_map */
u32 em_loc; /* enclosure management location */
};
@@ -331,12 +347,15 @@ static void ahci_init_sw_activity(struct ata_link *link);
static ssize_t ahci_show_host_caps(struct device *dev,
struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf);
static ssize_t ahci_show_host_version(struct device *dev,
struct device_attribute *attr, char *buf);
static ssize_t ahci_show_port_cmd(struct device *dev,
struct device_attribute *attr, char *buf);
DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
@@ -345,6 +364,7 @@ static struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_em_message_type,
&dev_attr_em_message,
&dev_attr_ahci_host_caps,
+ &dev_attr_ahci_host_cap2,
&dev_attr_ahci_host_version,
&dev_attr_ahci_port_cmd,
NULL
@@ -447,7 +467,8 @@ static const struct ata_port_info ahci_port_info[] = {
[board_ahci_sb600] =
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+ AHCI_HFLAG_32BIT_ONLY),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
@@ -732,6 +753,16 @@ static ssize_t ahci_show_host_caps(struct device *dev,
return sprintf(buf, "%x\n", hpriv->cap);
}
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
static ssize_t ahci_show_host_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -771,7 +802,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
struct ahci_host_priv *hpriv)
{
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
- u32 cap, port_map;
+ u32 cap, cap2, vers, port_map;
int i;
int mv;
@@ -784,6 +815,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+ /* CAP2 register is only defined for AHCI 1.2 and later */
+ vers = readl(mmio + HOST_VERSION);
+ if ((vers >> 16) > 1 ||
+ ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+ hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+ else
+ hpriv->saved_cap2 = cap2 = 0;
+
/* some chips have errata preventing 64bit use */
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
dev_printk(KERN_INFO, &pdev->dev,
@@ -869,6 +908,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
/* record values to use during operation */
hpriv->cap = cap;
+ hpriv->cap2 = cap2;
hpriv->port_map = port_map;
}
@@ -887,6 +927,8 @@ static void ahci_restore_initial_config(struct ata_host *host)
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
writel(hpriv->saved_cap, mmio + HOST_CAP);
+ if (hpriv->saved_cap2)
+ writel(hpriv->saved_cap2, mmio + HOST_CAP2);
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
}
@@ -2534,13 +2576,14 @@ static void ahci_print_info(struct ata_host *host)
struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
- u32 vers, cap, impl, speed;
+ u32 vers, cap, cap2, impl, speed;
const char *speed_s;
u16 cc;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = hpriv->cap;
+ cap2 = hpriv->cap2;
impl = hpriv->port_map;
speed = (cap >> 20) & 0xf;
@@ -2583,25 +2626,29 @@ static void ahci_print_info(struct ata_host *host)
"flags: "
"%s%s%s%s%s%s%s"
"%s%s%s%s%s%s%s"
- "%s\n"
+ "%s%s%s%s%s%s\n"
,
- cap & (1 << 31) ? "64bit " : "",
- cap & (1 << 30) ? "ncq " : "",
- cap & (1 << 29) ? "sntf " : "",
- cap & (1 << 28) ? "ilck " : "",
- cap & (1 << 27) ? "stag " : "",
- cap & (1 << 26) ? "pm " : "",
- cap & (1 << 25) ? "led " : "",
-
- cap & (1 << 24) ? "clo " : "",
- cap & (1 << 19) ? "nz " : "",
- cap & (1 << 18) ? "only " : "",
- cap & (1 << 17) ? "pmp " : "",
- cap & (1 << 15) ? "pio " : "",
- cap & (1 << 14) ? "slum " : "",
- cap & (1 << 13) ? "part " : "",
- cap & (1 << 6) ? "ems ": ""
+ cap & HOST_CAP_64 ? "64bit " : "",
+ cap & HOST_CAP_NCQ ? "ncq " : "",
+ cap & HOST_CAP_SNTF ? "sntf " : "",
+ cap & HOST_CAP_MPS ? "ilck " : "",
+ cap & HOST_CAP_SSS ? "stag " : "",
+ cap & HOST_CAP_ALPM ? "pm " : "",
+ cap & HOST_CAP_LED ? "led " : "",
+ cap & HOST_CAP_CLO ? "clo " : "",
+ cap & HOST_CAP_ONLY ? "only " : "",
+ cap & HOST_CAP_PMP ? "pmp " : "",
+ cap & HOST_CAP_FBS ? "fbs " : "",
+ cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+ cap & HOST_CAP_SSC ? "slum " : "",
+ cap & HOST_CAP_PART ? "part " : "",
+ cap & HOST_CAP_CCC ? "ccc " : "",
+ cap & HOST_CAP_EMS ? "ems " : "",
+ cap & HOST_CAP_SXS ? "sxs " : "",
+ cap2 & HOST_CAP2_APST ? "apst " : "",
+ cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+ cap2 & HOST_CAP2_BOH ? "boh " : ""
);
}
@@ -2650,17 +2697,15 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
}
}
-/*
- * SB600 ahci controller on certain boards can't do 64bit DMA with
- * older BIOS.
- */
-static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
+/* only some SB600 ahci controllers can do 64bit DMA */
+static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
{
static const struct dmi_system_id sysids[] = {
/*
* The oldest version known to be broken is 0901 and
* working is 1501 which was released on 2007-10-26.
- * Force 32bit DMA on anything older than 1501.
+ * Enable 64bit DMA on 1501 and anything newer.
+ *
* Please read bko#9412 for more info.
*/
{
@@ -2672,48 +2717,29 @@ static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
},
.driver_data = "20071026", /* yyyymmdd */
},
- /*
- * It's yet unknown whether more recent BIOS fixes the
- * problem. Blacklist the whole board for the time
- * being. Please read the following thread for more
- * info.
- *
- * http://thread.gmane.org/gmane.linux.ide/42326
- */
- {
- .ident = "Gigabyte GA-MA69VM-S2",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR,
- "Gigabyte Technology Co., Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "GA-MA69VM-S2"),
- },
- },
{ }
};
const struct dmi_system_id *match;
+ int year, month, date;
+ char buf[9];
match = dmi_first_match(sysids);
if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
!match)
return false;
- if (match->driver_data) {
- int year, month, date;
- char buf[9];
-
- dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
- snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
-
- if (strcmp(buf, match->driver_data) >= 0)
- return false;
+ dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+ snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
+ if (strcmp(buf, match->driver_data) >= 0) {
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+ match->ident);
+ return true;
+ } else {
dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
"forcing 32bit DMA, update BIOS\n", match->ident);
- } else
- dev_printk(KERN_WARNING, &pdev->dev, "%s: this board can't "
- "do 64bit DMA, forcing 32bit\n", match->ident);
-
- return true;
+ return false;
+ }
}
static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
@@ -2858,6 +2884,50 @@ static bool ahci_broken_online(struct pci_dev *pdev)
return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
}
+static void ahci_gtf_filter_workaround(struct ata_host *host)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * Aspire 3810T issues a bunch of SATA enable commands
+ * via _GTF including an invalid one and one which is
+ * rejected by the device. Among the successful ones
+ * is FPDMA non-zero offset enable which when enabled
+ * only on the drive side leads to NCQ command
+ * failures. Filter it out.
+ */
+ {
+ .ident = "Aspire 3810T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
+ },
+ .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
+ },
+ { }
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int filter;
+ int i;
+
+ if (!dmi)
+ return;
+
+ filter = (unsigned long)dmi->driver_data;
+ dev_printk(KERN_INFO, host->dev,
+ "applying extra ACPI _GTF filter 0x%x for %s\n",
+ filter, dmi->ident);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct ata_link *link;
+ struct ata_device *dev;
+
+ ata_for_each_link(link, ap, EDGE)
+ ata_for_each_dev(dev, link, ALL)
+ dev->gtf_filter |= filter;
+ }
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -2926,9 +2996,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
- /* apply sb600 32bit only quirk */
- if (ahci_sb600_32bit_only(pdev))
- hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
+ /* only some SB600s can do 64bit DMA */
+ if (ahci_sb600_enable_64bit(pdev))
+ hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
@@ -3023,6 +3093,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* apply workaround for ASUS P5W DH Deluxe mainboard */
ahci_p5wdh_workaround(host);
+ /* apply gtf filter quirk */
+ ahci_gtf_filter_workaround(host);
+
/* initialize adapter */
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
if (rc)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 01964b6..b0882cd 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -20,19 +20,9 @@
#include <acpi/acpi_bus.h>
-enum {
- ATA_ACPI_FILTER_SETXFER = 1 << 0,
- ATA_ACPI_FILTER_LOCK = 1 << 1,
- ATA_ACPI_FILTER_DIPM = 1 << 2,
-
- ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
- ATA_ACPI_FILTER_LOCK |
- ATA_ACPI_FILTER_DIPM,
-};
-
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
@@ -613,10 +603,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
tf->command = gtf->tf[6]; /* 0x1f7 */
}
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+ const struct ata_taskfile *tf,
const struct ata_taskfile *ptf)
{
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+ if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
/* libata doesn't use ACPI to configure transfer mode.
* It will only confuse device configuration. Skip.
*/
@@ -625,7 +616,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
return 1;
}
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+ if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
/* BIOS writers, sorry but we don't wanna lock
* features unless the user explicitly said so.
*/
@@ -647,12 +638,23 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
return 1;
}
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_SATA_ENABLE) {
/* inhibit enabling DIPM */
- if (tf->command == ATA_CMD_SET_FEATURES &&
- tf->feature == SETFEATURES_SATA_ENABLE &&
+ if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
tf->nsect == SATA_DIPM)
return 1;
+
+ /* inhibit FPDMA non-zero offset */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+ (tf->nsect == SATA_FPDMA_OFFSET ||
+ tf->nsect == SATA_FPDMA_IN_ORDER))
+ return 1;
+
+ /* inhibit FPDMA auto activation */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+ tf->nsect == SATA_FPDMA_AA)
+ return 1;
}
return 0;
@@ -704,7 +706,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
pptf = &ptf;
}
- if (!ata_acpi_filter_tf(&tf, pptf)) {
+ if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
rtf = tf;
err_mask = ata_exec_internal(dev, &rtf, NULL,
DMA_NONE, NULL, 0, 0);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0ddaf43..b525a09 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5591,6 +5591,9 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
dev->link = link;
dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+ dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
ata_dev_init(dev);
}
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a04488f..0a97822 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2667,14 +2667,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
dev->pio_mode = XFER_PIO_0;
dev->flags &= ~ATA_DFLAG_SLEEPING;
- if (!ata_phys_link_offline(ata_dev_phys_link(dev))) {
- /* apply class override */
- if (lflags & ATA_LFLAG_ASSUME_ATA)
- classes[dev->devno] = ATA_DEV_ATA;
- else if (lflags & ATA_LFLAG_ASSUME_SEMB)
- classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
- } else
- classes[dev->devno] = ATA_DEV_NONE;
+ if (ata_phys_link_offline(ata_dev_phys_link(dev)))
+ continue;
+
+ /* apply class override */
+ if (lflags & ATA_LFLAG_ASSUME_ATA)
+ classes[dev->devno] = ATA_DEV_ATA;
+ else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+ classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
}
/* record current link speed */
@@ -2713,34 +2713,48 @@ int ata_eh_reset(struct ata_link *link, int classify,
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
spin_unlock_irqrestore(link->ap->lock, flags);
- /* Make sure onlineness and classification result correspond.
+ /*
+ * Make sure onlineness and classification result correspond.
* Hotplug could have happened during reset and some
* controllers fail to wait while a drive is spinning up after
* being hotplugged causing misdetection. By cross checking
- * link onlineness and classification result, those conditions
- * can be reliably detected and retried.
+ * link on/offlineness and classification result, those
+ * conditions can be reliably detected and retried.
*/
nr_unknown = 0;
ata_for_each_dev(dev, link, ALL) {
- /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
- if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
- classes[dev->devno] = ATA_DEV_NONE;
- if (ata_phys_link_online(ata_dev_phys_link(dev)))
+ if (ata_phys_link_online(ata_dev_phys_link(dev))) {
+ if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+ ata_dev_printk(dev, KERN_DEBUG, "link online "
+ "but device misclassifed\n");
+ classes[dev->devno] = ATA_DEV_NONE;
nr_unknown++;
+ }
+ } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
+ if (ata_class_enabled(classes[dev->devno]))
+ ata_dev_printk(dev, KERN_DEBUG, "link offline, "
+ "clearing class %d to NONE\n",
+ classes[dev->devno]);
+ classes[dev->devno] = ATA_DEV_NONE;
+ } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+ ata_dev_printk(dev, KERN_DEBUG, "link status unknown, "
+ "clearing UNKNOWN to NONE\n");
+ classes[dev->devno] = ATA_DEV_NONE;
}
}
if (classify && nr_unknown) {
if (try < max_tries) {
ata_link_printk(link, KERN_WARNING, "link online but "
- "device misclassified, retrying\n");
+ "%d devices misclassified, retrying\n",
+ nr_unknown);
failed_link = link;
rc = -EAGAIN;
goto fail;
}
ata_link_printk(link, KERN_WARNING,
- "link online but device misclassified, "
- "device detection might fail\n");
+ "link online but %d devices misclassified, "
+ "device detection might fail\n", nr_unknown);
}
/* reset successful, schedule revalidation */
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index be8e262..823e630 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -118,6 +118,8 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
+extern unsigned int ata_acpi_gtf_filter;
+
extern void ata_acpi_associate_sata_port(struct ata_port *ap);
extern void ata_acpi_associate(struct ata_host *host);
extern void ata_acpi_dissociate(struct ata_host *host);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index fc9c5d6..1432dc9 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -290,7 +290,7 @@ static void ali_warn_atapi_dma(struct ata_device *adev)
if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
ata_dev_printk(adev, KERN_WARNING,
- "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n");
+ "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n");
ata_dev_printk(adev, KERN_WARNING,
"WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
}
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index 7990de9..6fe7ded 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -118,20 +118,13 @@ struct atp867x_priv {
int pci66mhz;
};
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
- return speed - XFER_UDMA_0 + 1;
-}
-
static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct atp867x_priv *dp = ap->private_data;
u8 speed = adev->dma_mode;
u8 b;
- u8 mode;
-
- mode = atp867x_speed_to_mode(speed);
+ u8 mode = speed - XFER_UDMA_0 + 1;
/*
* Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
@@ -156,25 +149,38 @@ static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
iowrite8(b, dp->dma_mode);
}
-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+ unsigned int clk)
{
+ struct atp867x_priv *dp = ap->private_data;
unsigned char clocks = clk;
+ /*
+ * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+ * on 66MHz bus
+ */
+ if (dp->pci66mhz)
+ clocks++;
+
switch (clocks) {
case 0:
clocks = 1;
break;
- case 1 ... 7:
- break;
- case 8 ... 12:
- clocks = 7;
+ case 1 ... 6:
break;
default:
printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
- "Using default 8clk.\n", clk);
- clocks = 0; /* 8 clk */
+ "Using 12clk.\n", clk);
+ case 9 ... 12:
+ clocks = 7; /* 12 clk */
break;
+ case 7:
+ case 8: /* default 8 clk */
+ clocks = 0;
+ goto active_clock_shift_done;
}
+
+active_clock_shift_done:
return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
}
@@ -188,20 +194,20 @@ static int atp867x_get_recover_clocks_shifted(unsigned int clk)
break;
case 1 ... 11:
break;
- case 12:
- clocks = 0;
- break;
- case 13: case 14:
- --clocks;
+ case 13:
+ case 14:
+ --clocks; /* by the spec */
break;
case 15:
break;
default:
printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
- "Using default 15clk.\n", clk);
- clocks = 0; /* 12 clk */
+ "Using default 12clk.\n", clk);
+ case 12: /* default 12 clk */
+ clocks = 0;
break;
}
+
return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
}
@@ -230,25 +236,38 @@ static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
iowrite8(b, dp->dma_mode);
- b = atp867x_get_active_clocks_shifted(t.active) |
- atp867x_get_recover_clocks_shifted(t.recover);
- if (dp->pci66mhz)
- b += 0x10;
+ b = atp867x_get_active_clocks_shifted(ap, t.active) |
+ atp867x_get_recover_clocks_shifted(t.recover);
if (adev->devno & 1)
iowrite8(b, dp->slave_piospd);
else
iowrite8(b, dp->mstr_piospd);
- /*
- * use the same value for comand timing as for PIO timimg
- */
+ b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+ atp867x_get_recover_clocks_shifted(t.rec8b);
+
iowrite8(b, dp->eightb_piospd);
}
+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+ (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+ pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+ return 1;
+ }
+ return 0;
+}
+
static int atp867x_cable_detect(struct ata_port *ap)
{
- return ATA_CBL_PATA40_SHORT;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (atp867x_cable_override(pdev))
+ return ATA_CBL_PATA40_SHORT;
+
+ return ATA_CBL_PATA_UNK;
}
static struct scsi_host_template atp867x_sht = {
@@ -471,7 +490,6 @@ static int atp867x_init_one(struct pci_dev *pdev,
static const struct ata_port_info info_867x = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &atp867x_ops,
};
@@ -515,6 +533,23 @@ err_out:
return rc;
}
+#ifdef CONFIG_PM
+static int atp867x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp867x_fixup(host);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_device_id atp867x_pci_tbl[] = {
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 },
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 },
@@ -526,6 +561,10 @@ static struct pci_driver atp867x_driver = {
.id_table = atp867x_pci_tbl,
.probe = atp867x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp867x_reinit_one,
+#endif
};
static int __init atp867x_init(void)
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 6299a25..4fb3573 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -334,9 +334,12 @@ enum {
SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
/* SETFEATURE Sector counts for SATA features */
- SATA_AN = 0x05, /* Asynchronous Notification */
- SATA_DIPM = 0x03, /* Device Initiated Power Management */
- SATA_FPDMA_AA = 0x02, /* DMA Setup FIS Auto-Activate */
+ SATA_FPDMA_OFFSET = 0x01, /* FPDMA non-zero buffer offsets */
+ SATA_FPDMA_AA = 0x02, /* FPDMA Setup FIS Auto-Activate */
+ SATA_DIPM = 0x03, /* Device Initiated Power Management */
+ SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */
+ SATA_AN = 0x05, /* Asynchronous Notification */
+ SATA_SSP = 0x06, /* Software Settings Preservation */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 76319bf..8769864 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -418,6 +418,17 @@ enum {
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
ATA_TIMING_UDMA,
+
+ /* ACPI constants */
+ ATA_ACPI_FILTER_SETXFER = 1 << 0,
+ ATA_ACPI_FILTER_LOCK = 1 << 1,
+ ATA_ACPI_FILTER_DIPM = 1 << 2,
+ ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3, /* FPDMA non-zero offset */
+ ATA_ACPI_FILTER_FPDMA_AA = 1 << 4, /* FPDMA auto activate */
+
+ ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
+ ATA_ACPI_FILTER_LOCK |
+ ATA_ACPI_FILTER_DIPM,
};
enum ata_xfer_mask {
@@ -587,6 +598,7 @@ struct ata_device {
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
union acpi_object *gtf_cache;
+ unsigned int gtf_filter;
#endif
/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists