| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Dec 2009 13:26:46 -0800
From: Greg KH <gregkh@...e.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org
Subject: [GIT PATCH] USB patches for 2.6.33-git
Here is the big USB merge for the 2.6.33-git tree.
Lots of different things here, mostly all just driver updates and a few
new additions. There was some prep work for future power api changes
done as well. All of the details are in the shortlog below.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/
All of these patches have been in the linux-next and mm trees for a
while.
The full patches will be sent to the linux-usb mailing list, if anyone
wants to see them.
thanks,
greg k-h
------------
Documentation/ABI/testing/sysfs-bus-usb | 13 +
.../ABI/testing/sysfs-class-uwb_rc-wusbhc | 13 +
Documentation/kernel-parameters.txt | 2 +
Documentation/powerpc/dts-bindings/xilinx.txt | 11 +
Documentation/usb/power-management.txt | 69 +-
MAINTAINERS | 4 +-
arch/arm/plat-mxc/Makefile | 1 +
arch/arm/plat-mxc/ehci.c | 92 +
arch/arm/plat-mxc/include/mach/mxc_ehci.h | 37 +
drivers/bluetooth/btusb.c | 2 +-
drivers/hid/usbhid/hid-core.c | 8 +-
drivers/net/wimax/i2400m/usb.c | 7 +-
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 2 +
drivers/usb/class/cdc-acm.c | 58 +-
drivers/usb/class/usbtmc.c | 54 +-
drivers/usb/core/driver.c | 135 +-
drivers/usb/core/file.c | 1 +
drivers/usb/core/generic.c | 2 +-
drivers/usb/core/hcd.c | 82 +-
drivers/usb/core/hcd.h | 19 +-
drivers/usb/core/hub.c | 142 +-
drivers/usb/core/message.c | 82 +-
drivers/usb/core/sysfs.c | 61 +-
drivers/usb/core/urb.c | 22 +-
drivers/usb/core/usb.c | 69 +-
drivers/usb/core/usb.h | 1 +
drivers/usb/gadget/Kconfig | 60 +
drivers/usb/gadget/Makefile | 4 +
drivers/usb/gadget/at91_udc.c | 6 +-
drivers/usb/gadget/audio.c | 115 -
drivers/usb/gadget/composite.c | 59 +-
drivers/usb/gadget/ether.c | 16 +-
drivers/usb/gadget/f_acm.c | 28 +
drivers/usb/gadget/f_audio.c | 76 +-
drivers/usb/gadget/f_mass_storage.c | 3091 ++++++++++++++++++++
drivers/usb/gadget/f_rndis.c | 35 +-
drivers/usb/gadget/file_storage.c | 879 +-----
drivers/usb/gadget/mass_storage.c | 240 ++
drivers/usb/gadget/multi.c | 358 +++
drivers/usb/gadget/storage_common.c | 778 +++++
drivers/usb/gadget/u_ether.h | 2 +-
drivers/usb/host/Kconfig | 22 +-
drivers/usb/host/ehci-hcd.c | 19 +-
drivers/usb/host/ehci-hub.c | 2 +-
drivers/usb/host/ehci-mxc.c | 296 ++
drivers/usb/host/ehci-omap.c | 756 +++++
drivers/usb/host/ehci-q.c | 32 +-
drivers/usb/host/ehci-sched.c | 36 +-
drivers/usb/host/ehci-xilinx-of.c | 300 ++
drivers/usb/host/isp1362.h | 4 +-
drivers/usb/host/ohci-at91.c | 10 +-
drivers/usb/host/ohci-pnx4008.c | 8 +-
drivers/usb/host/r8a66597-hcd.c | 4 -
drivers/usb/host/whci/debug.c | 20 +-
drivers/usb/host/whci/hcd.c | 1 +
drivers/usb/host/whci/qset.c | 350 ++-
drivers/usb/host/whci/whcd.h | 9 +
drivers/usb/host/whci/whci-hc.h | 14 +-
drivers/usb/host/xhci-hcd.c | 139 +-
drivers/usb/host/xhci-mem.c | 255 ++-
drivers/usb/host/xhci-pci.c | 2 +
drivers/usb/host/xhci-ring.c | 343 ++-
drivers/usb/host/xhci.h | 37 +-
drivers/usb/misc/usbtest.c | 7 +-
drivers/usb/mon/mon_bin.c | 51 +-
drivers/usb/mon/mon_text.c | 23 +-
drivers/usb/musb/Kconfig | 5 +-
drivers/usb/musb/blackfin.c | 16 +-
drivers/usb/musb/blackfin.h | 37 +
drivers/usb/musb/musb_core.c | 10 +-
drivers/usb/musb/musb_core.h | 8 +
drivers/usb/musb/musb_dma.h | 11 +
drivers/usb/musb/musb_gadget.c | 196 +-
drivers/usb/musb/musb_gadget.h | 4 +-
drivers/usb/musb/musb_gadget_ep0.c | 70 +-
drivers/usb/musb/musb_host.c | 10 +-
drivers/usb/musb/musb_regs.h | 4 +-
drivers/usb/musb/musbhsdma.c | 12 +-
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/otg/Kconfig | 9 +
drivers/usb/otg/Makefile | 1 +
drivers/usb/otg/twl4030-usb.c | 4 +-
drivers/usb/otg/ulpi.c | 136 +
drivers/usb/serial/ark3116.c | 975 +++++--
drivers/usb/serial/ftdi_sio.c | 32 +-
drivers/usb/serial/ftdi_sio.h | 14 +
drivers/usb/serial/mos7840.c | 24 +-
drivers/usb/serial/option.c | 39 +-
drivers/usb/serial/sierra.c | 91 +-
drivers/usb/storage/scsiglue.c | 3 +-
drivers/usb/storage/transport.c | 17 +-
drivers/usb/storage/unusual_devs.h | 7 +
drivers/usb/storage/usb.c | 43 +-
drivers/usb/storage/usb.h | 1 +
drivers/usb/usb-skeleton.c | 4 +-
drivers/usb/wusbcore/devconnect.c | 7 +-
drivers/usb/wusbcore/security.c | 6 +-
drivers/usb/wusbcore/wusbhc.c | 32 +
drivers/usb/wusbcore/wusbhc.h | 1 +
include/linux/usb.h | 33 +-
include/linux/usb/composite.h | 1 +
include/linux/usb/otg.h | 68 +-
include/linux/usb/ulpi.h | 7 +
include/linux/usb_usual.h | 4 +-
scripts/mod/file2alias.c | 93 +-
106 files changed, 9634 insertions(+), 1881 deletions(-)
create mode 100644 arch/arm/plat-mxc/ehci.c
create mode 100644 arch/arm/plat-mxc/include/mach/mxc_ehci.h
create mode 100644 drivers/usb/gadget/f_mass_storage.c
create mode 100644 drivers/usb/gadget/mass_storage.c
create mode 100644 drivers/usb/gadget/multi.c
create mode 100644 drivers/usb/gadget/storage_common.c
create mode 100644 drivers/usb/host/ehci-mxc.c
create mode 100644 drivers/usb/host/ehci-omap.c
create mode 100644 drivers/usb/host/ehci-xilinx-of.c
create mode 100644 drivers/usb/otg/ulpi.c
create mode 100644 include/linux/usb/ulpi.h
---------------
Adrian Taylor (1):
USB: Exposing second ACM channel as tty for Nokia S60 phones.
Aguilar Pena, Leed (1):
USB: twl4030: Enable USB regulators before enabling USB charging
Alan Stern (9):
USB: don't use a fixed DMA mapping for hub status URBs
USB: add a "remove hardware" sysfs attribute
USB: fix a bug in the scatter-gather library
USB: EHCI: add native scatter-gather support
USB: add scatter-gather support to usbmon
USB: remove the auto_pm flag
USB: prepare for changover to Runtime PM framework
USB: usb-storage: add BAD_SENSE flag
USB: usb-storage: fix bug in fill_inquiry
Anand Gadiyar (2):
USB: ehci: Allow EHCI to be built on OMAP3
USB: MUSB: save hardware revision at init
Andre Herms (1):
USB: usbtmc: repeat usb_bulk_msg until whole message is transfered
Bryan Wu (3):
USB: musb: kill compile warning for Blackfin systems
USB: musb: kill some useless comments in Blackfin driver
USB: musb: fix musb_platform_set_mode() definition
CHENG Renquan (1):
USB: add remove_id sysfs attr for usb drivers
Cliff Brake (2):
USB: ftdi_sio: add USB device ID's for B&B Electronics line
USB: mos7840: add device IDs for B&B electronics devices
Cliff Cai (2):
USB: musb: clear the Blackfin interrupt pending bits early in the ISR
USB: musb: Blackfin code needs NOP_USB_XCEIV too
Dan Carpenter (2):
USB: r8a66597: clean up. remove unneeded null checks
USB: fix possible null deref in init_usb_class()
Daniel Mack (3):
USB OTG: add support for ulpi connected external transceivers
USB OTG: Add generic driver for ULPI OTG transceiver
USB: Add EHCI support for MX27 and MX31 based boards
David Vrabel (9):
USB: make urb scatter-gather support more generic
USB: whci-hcd: support urbs with scatter-gather lists
USB: allow interrupt transfers to WUSB devices
USB: whci-hcd: fix type and format warnings in sg code
usb: whci-hcd: decode more QHead fields in the debug files
USB: wusb: add wusb_phy_rate sysfs file to host controllers
USB: whci-hcd: correctly handle sg lists longer than QTD_MAX_XFER_SIZE.
USB: wusb: don't leak urb in certain error cases
USB: wusb: correctly check size of security descriptor.
Elina Pasheva (1):
USB: serial: sierra driver memory reduction
Felipe Balbi (7):
USB: host: ehci: introduce omap ehci-hcd driver
USB: core: fix sparse warning for static function
USB: core: hub: fix sparse warning
USB: core: message: fix sparse warning
USB: musb: omap2430: fix sparse warning
USB: musb: musb_gadget: fix sparse warning
USB: musb: musb_host: fix sparse warning
Greg Kroah-Hartman (1):
USB: add devpath sysfs attribute
H Hartley Sweeten (1):
USB: hcd.c: quiet NULL pointer sparse noise
Hong Xu (1):
USB: modifications for at91sam9g10
Jason Wessel (1):
USB: ehci-hub: Remove redundant ehci->debug check
Jean Delvare (1):
USB: Add missing static markers to ohci-pnx4008
Julia Lawall (3):
USB: skeleton: Correct use of ! and &
USB: xhci-mem.c: introduce missing kfree
USB: ehci-omap.c: introduce missing kfree
Julie Zhu (1):
USB: Add support for Xilinx USB host controller
Larry Finger (1):
USB: Check results of dma_map_single
Laurent Pinchart (2):
USB gadget: Handle endpoint requests at the function level
USB audio gadget: handle endpoint control requests at the function level
Matthew Wilcox (3):
USB: Convert a dev_info to a dev_dbg
USB: usb-storage: Associate the name of the interface with the scsi host
USB Storage: Make driver less chatty when it finds a new device
Michal Nazarewicz (19):
USB: g_file_storage: parts of file_storage.c moved to separate file
USB: g_file_storage: "fsg_" prefix added to some identifiers
USB: g_file_storage: per-LUN ro, removable and cdrom flags handling changed
USB: g_file_storage: more code from file_storage.c moved to storage_common.c
USB: g_mass_storage: template f_mass_storage.c file created
USB: g_mass_storage: testing code from f_mass_storage.c removed
USB: g_mass_storage: parts of fsg_dev moved to fsg_common structure
USB: g_mass_storage: constant length buffers used
USB: g_mass_storage: fsg_common_init() created
USB: Interface Association Descriptors added to CDC & RNDIS
USB: g_mass_storage: Mass Storage Function created
USB: g_mass_storage: fsg_config added & module params handlig changed
USB: g_mass_storage: lun_name_format and thread_name added
USB: g_mass_storage: code cleaned up and comments updated
USB: g_mass_storage: most data moved to fsg_common
USB: composite: usb_composite_unregister() no longer __exit
USB: g_mass_storage: thread_exits callback added
USB: g_multi: Multifunction Composite Gadget added
USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
Mike Frysinger (2):
USB: musb: tweak musb_read_fifo() to avoid unused warnings
USB: musb: fix printf warning in debug code
Nathaniel McCallum (2):
USB: add hex/bcd detection to usb modalias generation
USB: handle bcd incrementation in usb modalias generation
Oliver Neukum (2):
USB: usbtmc: minor formatting cleanups
USB: improved error handling in usb_port_suspend()
Randy Dunlap (1):
USB: g_multi kconfig: fix depends and help text
Roel Kluin (1):
USB: FIX bitfield istl_flip:1, make it unsigned.
Roland Koebler (1):
USB: serial: ftdi_sio: add space/mark parity
Russ Dill (1):
USB: Close usb_find_interface race
Sarah Sharp (17):
USB: xhci: Handle URB cancel, complete and resubmit race.
USB: xhci: Re-purpose xhci_quiesce().
USB: xhci: Add watchdog timer for URB cancellation.
USB: xhci: Remove unused HCD statistics code.
USB: ehci: Minor constant fix for SCHEDULE_SLOP.
USB: ehci: Respect IST when scheduling new split iTDs.
USB: xhci: Add tests for TRB address translation.
USB: xhci: Set transfer descriptor size field correctly.
USB: xhci: Return -EPROTO on a split transaction error.
USB: xhci: Return success for vendor-specific info codes.
USB: xhci: Handle errors that cause endpoint halts.
USB: xhci: Add correct email and files to MAINTAINERS entry.
USB: usbtmc: Use usb_clear_halt() instead of custom code.
USB: xhci: Make reverting an alt setting "unfailable".
USB: xhci: Fix command completion after a drop endpoint.
USB: Refactor code to find alternate interface settings.
USB: Check bandwidth when switching alt settings.
Sergei Shtylyov (4):
USB: musb_gadget_ep0: fix unhandled endpoint 0 IRQs, again
USB: musb_gadget: implement set_wedge() method
USB: musb_gadget_ep0: stop abusing musb_gadget_set_halt()
USB: musb_gadget: remove pointless loop
Sonic Zhang (4):
USB: musb: update Blackfin processor dependency
USB: musb: add notes for Blackfin anomalies
USB: musb: add work around for Blackfin anomaly 05000456
USB: musb: error out when anomaly 05000380 is applicable
Vikram Pandita (1):
usbtest: make module param pattern writeable
Zhang Le (1):
USB: option.c: add support for D-Link DWM-162-U5
bart.hartgers@...il.com (6):
USB: ark3116: Setup some basic infrastructure for new ark3116 driver.
USB: ark3116: Make existing functions 16450-aware and add close and release functions.
USB: ark3116: Replace cmget
USB: ark3116: Add cmset and break
USB: ark3116: Callbacks for interrupt and bulk read
USB: ark3116: Cleanup of now unneeded functions
zhao.ming9@....com.cn (1):
USB: option: add pid for ZTE
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists