| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 15 Dec 2009 13:06:40 +0100
From: Stefan Seyfried <stefan.seyfried@...glemail.com>
To: linux-usb@...r.kernel.org, linux-wireless@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, usb-storage@...ts.one-eyed-alien.net,
Stefan Seyfried <seife@...airon.com>
Subject: [PATCH] move eject code from zd1211rw to usb-storage
From: Stefan Seyfried <seife@...airon.com>
The USB ID claimed by zd1211rw for the fake storage device is
also in use by other, non-zd1211rw devices (Sphairon Homelink
1202). Move the eject of these devices to where it belongs and
where all the needed infrastructure already exists: usb-storage.
Signed-off-by: Stefan Seyfried <seife@...airon.com>
---
drivers/net/wireless/zd1211rw/zd_usb.c | 57 +-------------------------------
drivers/net/wireless/zd1211rw/zd_usb.h | 1 -
drivers/usb/storage/initializers.c | 28 +++++++++++++++
drivers/usb/storage/initializers.h | 3 ++
drivers/usb/storage/unusual_devs.h | 13 ++++---
5 files changed, 39 insertions(+), 63 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ac19ecd..983ebdb 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -90,9 +90,6 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
- /* "Driverless" devices that need ejecting */
- { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
- { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
{}
};
@@ -1068,54 +1065,6 @@ static void print_id(struct usb_device *udev)
#define print_id(udev) do { } while (0)
#endif
-static int eject_installer(struct usb_interface *intf)
-{
- struct usb_device *udev = interface_to_usbdev(intf);
- struct usb_host_interface *iface_desc = &intf->altsetting[0];
- struct usb_endpoint_descriptor *endpoint;
- unsigned char *cmd;
- u8 bulk_out_ep;
- int r;
-
- /* Find bulk out endpoint */
- endpoint = &iface_desc->endpoint[1].desc;
- if (usb_endpoint_dir_out(endpoint) &&
- usb_endpoint_xfer_bulk(endpoint)) {
- bulk_out_ep = endpoint->bEndpointAddress;
- } else {
- dev_err(&udev->dev,
- "zd1211rw: Could not find bulk out endpoint\n");
- return -ENODEV;
- }
-
- cmd = kzalloc(31, GFP_KERNEL);
- if (cmd == NULL)
- return -ENODEV;
-
- /* USB bulk command block */
- cmd[0] = 0x55; /* bulk command signature */
- cmd[1] = 0x53; /* bulk command signature */
- cmd[2] = 0x42; /* bulk command signature */
- cmd[3] = 0x43; /* bulk command signature */
- cmd[14] = 6; /* command length */
-
- cmd[15] = 0x1b; /* SCSI command: START STOP UNIT */
- cmd[19] = 0x2; /* eject disc */
-
- dev_info(&udev->dev, "Ejecting virtual installer media...\n");
- r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, bulk_out_ep),
- cmd, 31, NULL, 2000);
- kfree(cmd);
- if (r)
- return r;
-
- /* At this point, the device disconnects and reconnects with the real
- * ID numbers. */
-
- usb_set_intfdata(intf, NULL);
- return 0;
-}
-
int zd_usb_init_hw(struct zd_usb *usb)
{
int r;
@@ -1157,9 +1106,6 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
print_id(udev);
- if (id->driver_info & DEVICE_INSTALLER)
- return eject_installer(intf);
-
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
@@ -1219,8 +1165,7 @@ static void disconnect(struct usb_interface *intf)
struct zd_mac *mac;
struct zd_usb *usb;
- /* Either something really bad happened, or we're just dealing with
- * a DEVICE_INSTALLER. */
+ /* something really bad happened */
if (hw == NULL)
return;
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h
index 049f8b9..0bc96f2 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.h
+++ b/drivers/net/wireless/zd1211rw/zd_usb.h
@@ -35,7 +35,6 @@
enum devicetype {
DEVICE_ZD1211 = 0,
DEVICE_ZD1211B = 1,
- DEVICE_INSTALLER = 2,
};
enum endpoints {
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 105d900..da28924 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -104,3 +104,31 @@ int usb_stor_huawei_e220_init(struct us_data *us)
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
+
+/* eject fake USB cdrom on zd1211rw and similar devices */
+int zd1211rw_eject_installer(struct us_data *us)
+{
+ unsigned char *cmd;
+ int r;
+
+ cmd = kzalloc(31, GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENODEV;
+
+ /* USB bulk command block */
+ cmd[0] = 0x55; /* bulk command signature */
+ cmd[1] = 0x53; /* bulk command signature */
+ cmd[2] = 0x42; /* bulk command signature */
+ cmd[3] = 0x43; /* bulk command signature */
+ cmd[14] = 6; /* command length */
+
+ cmd[15] = 0x1b; /* SCSI command: START STOP UNIT */
+ cmd[19] = 0x2; /* eject disc */
+
+ US_DEBUGP("Ejecting zd1211rw virtual installer media...\n");
+ r = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ cmd, 31, NULL);
+ kfree(cmd);
+
+ return r;
+}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 529327f..e7bec81 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -48,3 +48,6 @@ int usb_stor_ucr61s2b_init(struct us_data *us);
/* This places the HUAWEI E220 devices in multi-port mode */
int usb_stor_huawei_e220_init(struct us_data *us);
+
+/* eject fake USB cdrom on zd1211rw and similar devices */
+int zd1211rw_eject_installer(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d4f034e..4f05e01 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1103,19 +1103,20 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
-/* These are virtual windows driver CDs, which the zd1211rw driver
- * automatically converts into WLAN devices. */
+/* These are virtual windows driver CDs, which the zd1211rw driver or
+ * ar9170usb handle after we switched them them out of storage mode
+ */
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
"ZyXEL",
"G-220F USB-WLAN Install",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_DEVICE ),
+ US_SC_DEVICE, US_PR_DEVICE, zd1211rw_eject_installer,
+ 0),
UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
"SiteCom",
"WL-117 USB-WLAN Install",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_DEVICE ),
+ US_SC_DEVICE, US_PR_DEVICE, zd1211rw_eject_installer,
+ 0),
/* Reported by Dan Williams <dcbw@...hat.com>
* Option N.V. mobile broadband modems
--
1.6.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists