[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC 2009 [ 0.000000] Command line: root=/dev/sda4 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe90000 (usable) [ 0.000000] BIOS-e820: 00000000bfe90000 - 00000000bfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfea8000 - 00000000bfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfe90 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe90000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfe90000 page 4k [ 0.000000] kernel direct mapping tables up to bfe90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ 12000-14000 [ 0.000000] RAMDISK: 37886000 - 37fef11b [ 0.000000] ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bfe90100 00054 (v01 060509 XSDT1006 20090605 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bfe90290 000F4 (v03 060509 FACP1006 20090605 MSFT 00000097) [ 0.000000] ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20090320] [ 0.000000] ACPI: DSDT 00000000bfe90440 0E6E4 (v01 A1152 A1152000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bfea8000 00040 [ 0.000000] ACPI: APIC 00000000bfe90390 0006C (v01 060509 APIC1006 20090605 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bfe90400 0003C (v01 060509 OEMMCFG 20090605 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bfea8040 00072 (v01 060509 OEMB1006 20090605 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bfe9f440 00038 (v01 060509 OEMHPET 20090605 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bfe9f480 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [0000000000013000 - 000000000001afff] [ 0.000000] bootmap [000000000001b000 - 0000000000060fff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007dd8cc] TEXT DATA BSS ==> [0000200000 - 00007dd8cc] [ 0.000000] #3 [0037886000 - 0037fef11b] RAMDISK ==> [0037886000 - 0037fef11b] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00007de000 - 00007de290] BRK ==> [00007de000 - 00007de290] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002effffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfe90 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2031135 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1603 pages reserved [ 0.000000] DMA zone: 2324 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767688 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfe90000 - 00000000bfea8000 [ 0.000000] PM: Registered nosave memory: 00000000bfea8000 - 00000000bfed0000 [ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:40000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998172 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda4 ro quiet [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3211.077 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 4000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.004000] Memory: 7932016k/9175040k available (2784k kernel code, 1050500k absent, 192524k reserved, 1415k data, 560k init) [ 0.004000] hpet clockevent registered [ 0.004000] alloc irq_desc for 24 on cpu 0 node 0 [ 0.004000] alloc kstat_irqs on cpu 0 node 0 [ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.14 BogoMIPS (lpj=12844292) [ 0.004054] Security Framework initialized [ 0.004057] SELinux: Disabled at boot. [ 0.004509] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006513] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.007391] Mount-cache hash table entries: 256 [ 0.007474] Initializing cgroup subsys ns [ 0.007477] Initializing cgroup subsys cpuacct [ 0.007479] Initializing cgroup subsys devices [ 0.007481] Initializing cgroup subsys freezer [ 0.007482] Initializing cgroup subsys net_cls [ 0.007498] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.007499] CPU: L2 Cache: 512K (64 bytes/line) [ 0.007500] CPU 0/0x0 -> Node 0 [ 0.007502] tseg: 0000000000 [ 0.007512] CPU: Physical Processor ID: 0 [ 0.007512] CPU: Processor Core ID: 0 [ 0.007518] using C1E aware idle routine [ 0.008057] ACPI: Core revision 20090320 [ 0.024039] Setting APIC routing to flat [ 0.024327] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064881] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 6421.93 BogoMIPS (lpj=12843864) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.152863] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.152869] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156014] System has AMD C1E enabled [ 0.156024] Switch to broadcast mode on CPU1 [ 0.156060] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 6421.92 BogoMIPS (lpj=12843840) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 2/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.244799] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.244804] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.248017] Switch to broadcast mode on CPU2 [ 0.248064] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 6421.88 BogoMIPS (lpj=12843762) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 3/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.336816] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.336820] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.340020] Brought up 4 CPUs [ 0.340022] Total of 4 processors activated (25687.87 BogoMIPS). [ 0.340019] Switch to broadcast mode on CPU3 [ 0.340073] CPU0 attaching sched-domain: [ 0.340075] domain 0: span 0-3 level MC [ 0.340077] groups: 0 1 2 3 [ 0.340081] CPU1 attaching sched-domain: [ 0.340082] domain 0: span 0-3 level MC [ 0.340083] groups: 1 2 3 0 [ 0.340087] CPU2 attaching sched-domain: [ 0.340088] domain 0: span 0-3 level MC [ 0.340089] groups: 2 3 0 1 [ 0.340092] CPU3 attaching sched-domain: [ 0.340093] domain 0: span 0-3 level MC [ 0.340094] groups: 3 0 1 2 [ 0.340147] Switch to broadcast mode on CPU0 [ 0.340147] net_namespace: 1936 bytes [ 0.340147] Booting paravirtualized kernel on bare hardware [ 0.340147] regulator: core version 0.5 [ 0.340147] NET: Registered protocol family 16 [ 0.340147] node 0 link 0: io port [1000, ffffff] [ 0.340147] TOM: 00000000d0000000 aka 3328M [ 0.340147] Fam 10h mmconf [e0000000, efffffff] [ 0.340147] node 0 link 0: mmio [a0000, bffff] [ 0.340147] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 0.340147] node 0 link 0: mmio [f0000000, fbcfffff] [ 0.340147] node 0 link 0: mmio [fbd00000, fbefffff] [ 0.340147] node 0 link 0: mmio [fbf00000, ffefffff] [ 0.340147] TOM2: 0000000230000000 aka 8960M [ 0.340147] bus: [00,07] on node 0 link 0 [ 0.340147] bus: 00 index 0 io port: [0, ffff] [ 0.340147] bus: 00 index 1 mmio: [a0000, bffff] [ 0.340147] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.340147] bus: 00 index 3 mmio: [f0000000, ffffffff] [ 0.340147] bus: 00 index 4 mmio: [230000000, fcffffffff] [ 0.340147] ACPI: bus type pci registered [ 0.340147] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.340147] PCI: Not using MMCONFIG. [ 0.340147] PCI: Using configuration type 1 for base access [ 0.340147] PCI: Using configuration type 1 for extended access [ 0.340147] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.340147] mtrr: probably your BIOS does not setup all CPUs. [ 0.340147] mtrr: corrected configuration. [ 0.340147] bio: create slab at 0 [ 0.340451] ACPI: EC: Look up EC in DSDT [ 0.431345] ACPI: Interpreter enabled [ 0.431348] ACPI: (supports S0 S1 S3 S4 S5) [ 0.431368] ACPI: Using IOAPIC for interrupt routing [ 0.431421] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.436846] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.442943] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.449672] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 05, should be FC [20090320] [ 0.449672] ACPI: No dock devices found. [ 0.449672] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.449672] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.449672] pci 0000:00:06.0: PME# disabled [ 0.449672] pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007] [ 0.449672] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003] [ 0.449672] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007] [ 0.449672] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003] [ 0.449672] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f] [ 0.449672] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbcffc00-0xfbcfffff] [ 0.449672] pci 0000:00:12.0: reg 10 32bit mmio: [0xfbcfd000-0xfbcfdfff] [ 0.449672] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbcfe000-0xfbcfefff] [ 0.449672] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbcff800-0xfbcff8ff] [ 0.449672] pci 0000:00:12.2: supports D1 D2 [ 0.449672] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.449672] pci 0000:00:12.2: PME# disabled [ 0.452023] pci 0000:00:13.0: reg 10 32bit mmio: [0xfbcfb000-0xfbcfbfff] [ 0.452070] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbcfc000-0xfbcfcfff] [ 0.452133] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbcff400-0xfbcff4ff] [ 0.452179] pci 0000:00:13.2: supports D1 D2 [ 0.452180] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.452183] pci 0000:00:13.2: PME# disabled [ 0.452284] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.452290] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.452295] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.452301] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.452306] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.452363] pci 0000:00:14.2: reg 10 64bit mmio: [0xfbcf4000-0xfbcf7fff] [ 0.452400] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.452403] pci 0000:00:14.2: PME# disabled [ 0.452495] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbcfa000-0xfbcfafff] [ 0.452599] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.452602] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff] [ 0.452604] pci 0000:01:05.0: reg 18 32bit mmio: [0xfbee0000-0xfbeeffff] [ 0.452609] pci 0000:01:05.0: reg 24 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.452618] pci 0000:01:05.0: supports D1 D2 [ 0.452631] pci 0000:01:05.1: reg 10 32bit mmio: [0xfbefc000-0xfbefffff] [ 0.452645] pci 0000:01:05.1: supports D1 D2 [ 0.452679] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.452681] pci 0000:00:01.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff] [ 0.452684] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.452725] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff] [ 0.452731] pci 0000:02:00.0: reg 18 io port: [0xec00-0xec7f] [ 0.452775] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.452778] pci 0000:02:00.0: PME# disabled [ 0.452828] pci 0000:00:06.0: bridge io port: [0xe000-0xefff] [ 0.452829] pci 0000:00:06.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.452882] pci 0000:00:14.4: transparent bridge [ 0.452901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.453083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.453143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.453209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.456134] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15) [ 0.456206] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.456319] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.456432] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15) [ 0.456545] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.456658] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.456771] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.456884] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.456930] usbcore: registered new interface driver usbfs [ 0.456930] usbcore: registered new interface driver hub [ 0.456930] usbcore: registered new device driver usb [ 0.456930] PCI: Using ACPI for IRQ routing [ 0.472074] PCI-DMA: Disabling AGP. [ 0.472122] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.472122] PCI-DMA: using GART IOMMU. [ 0.472122] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.473764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.473769] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.480021] hpet: hpet2 irq 24 for MSI [ 0.503988] Switched to high resolution mode on CPU 3 [ 0.503992] Switched to high resolution mode on CPU 1 [ 0.503996] Switched to high resolution mode on CPU 2 [ 0.504012] Switched to high resolution mode on CPU 0 [ 0.508252] pnp: PnP ACPI init [ 0.508267] ACPI: bus type pnp registered [ 0.513014] pnp: PnP ACPI: found 15 devices [ 0.513015] ACPI: ACPI bus type pnp unregistered [ 0.513022] system 00:01: iomem range 0xc0000000-0xcfffffff has been reserved [ 0.513027] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.513029] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.513033] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.513035] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.513036] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.513038] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.513040] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.513041] system 00:08: ioport range 0xc50-0xc51 has been reserved [ 0.513043] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.513045] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.513046] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.513048] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.513050] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.513052] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.513053] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.513055] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.513057] system 00:08: ioport range 0xb00-0xb3f has been reserved [ 0.513058] system 00:08: ioport range 0x800-0x89f has been reserved [ 0.513060] system 00:08: ioport range 0xb00-0xb0f has been reserved [ 0.513062] system 00:08: ioport range 0xb20-0xb3f has been reserved [ 0.513064] system 00:08: ioport range 0x900-0x90f has been reserved [ 0.513065] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.513067] system 00:08: ioport range 0xfe00-0xfefe has been reserved [ 0.513069] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.513071] system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.513075] system 00:0c: ioport range 0x230-0x23f has been reserved [ 0.513077] system 00:0c: ioport range 0x290-0x29f has been reserved [ 0.513078] system 00:0c: ioport range 0xf40-0xf4f has been reserved [ 0.513080] system 00:0c: ioport range 0xa30-0xa3f has been reserved [ 0.513083] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.513086] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.513088] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.513090] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.513092] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved [ 0.513094] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.517976] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.517978] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.517980] pci 0000:00:01.0: MEM window: 0xfbd00000-0xfbefffff [ 0.517982] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.517985] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.517986] pci 0000:00:06.0: IO window: 0xe000-0xefff [ 0.517988] pci 0000:00:06.0: MEM window: 0xfbf00000-0xfbffffff [ 0.517990] pci 0000:00:06.0: PREFETCH window: disabled [ 0.517993] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.517994] pci 0000:00:14.4: IO window: disabled [ 0.517998] pci 0000:00:14.4: MEM window: disabled [ 0.518001] pci 0000:00:14.4: PREFETCH window: disabled [ 0.518011] alloc irq_desc for 18 on cpu 0 node 0 [ 0.518013] alloc kstat_irqs on cpu 0 node 0 [ 0.518016] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.518018] pci 0000:00:06.0: setting latency timer to 64 [ 0.518024] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.518026] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.518027] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.518029] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff] [ 0.518030] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.518032] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.518033] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.518035] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.518037] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.518108] NET: Registered protocol family 2 [ 0.576402] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.577314] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.579100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.579328] TCP: Hash tables configured (established 524288 bind 65536) [ 0.579329] TCP reno registered [ 0.608323] NET: Registered protocol family 1 [ 0.608359] Trying to unpack rootfs image as initramfs... [ 0.717788] Freeing initrd memory: 7588k freed [ 0.720648] audit: initializing netlink socket (disabled) [ 0.720659] type=2000 audit(1252659046.720:1): initialized [ 0.721097] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.721215] VFS: Disk quotas dquot_6.5.2 [ 0.721238] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.721273] msgmni has been set to 15507 [ 0.721408] alg: No test for stdrng (krng) [ 0.721462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.721464] io scheduler noop registered [ 0.721465] io scheduler anticipatory registered [ 0.721466] io scheduler deadline registered [ 0.721483] io scheduler cfq registered (default) [ 0.868259] pci 0000:01:05.0: Boot video device [ 0.868395] alloc irq_desc for 25 on cpu 0 node 0 [ 0.868397] alloc kstat_irqs on cpu 0 node 0 [ 0.868403] pcieport-driver 0000:00:06.0: irq 25 for MSI/MSI-X [ 0.868409] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 0.870879] Linux agpgart interface v0.103 [ 0.870881] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.870995] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.871325] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.872473] brd: module loaded [ 0.872532] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.872662] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.872664] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.872755] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.872842] mice: PS/2 mouse device common for all mice [ 0.872881] rtc_cmos 00:03: RTC can wake from S4 [ 0.872911] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.872933] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.872953] cpuidle: using governor ladder [ 0.872954] cpuidle: using governor menu [ 0.872957] No iBFT detected. [ 0.873174] TCP cubic registered [ 0.873221] NET: Registered protocol family 10 [ 0.873512] lo: Disabled Privacy Extensions [ 0.873695] Mobile IPv6 [ 0.873697] NET: Registered protocol family 17 [ 0.873798] registered taskstats version 1 [ 0.873912] rtc_cmos 00:03: setting system clock to 2009-09-11 08:50:47 UTC (1252659047) [ 0.873944] Freeing unused kernel memory: 560k freed [ 0.874068] Write protecting the kernel read-only data: 3812k [ 0.889125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.943988] Floppy drive(s): fd0 is 1.44M [ 0.947547] ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.947556] ATL1E 0000:02:00.0: setting latency timer to 64 [ 0.955809] SCSI subsystem initialized [ 0.960337] Uniform Multi-Platform E-IDE driver [ 0.961255] FDC 0 is a post-1991 82077 [ 0.961259] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961310] alloc irq_desc for 17 on cpu 0 node 0 [ 0.961311] alloc kstat_irqs on cpu 0 node 0 [ 0.961317] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.961341] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.961402] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.961442] ehci_hcd 0000:00:12.2: debug port 1 [ 0.961457] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff800 [ 0.970101] libata version 3.00 loaded. [ 0.970488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.976040] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.976056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.976058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.976059] usb usb1: Product: EHCI Host Controller [ 0.976061] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 0.976062] usb usb1: SerialNumber: 0000:00:12.2 [ 0.976115] usb usb1: configuration #1 chosen from 1 choice [ 0.976133] hub 1-0:1.0: USB hub found [ 0.976138] hub 1-0:1.0: 6 ports detected [ 0.976265] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) [ 0.976274] alloc irq_desc for 16 on cpu 0 node 0 [ 0.976275] alloc kstat_irqs on cpu 0 node 0 [ 0.976280] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.976293] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 0.976297] ide0: BM-DMA at 0xff00-0xff07 [ 0.976302] atiixp 0000:00:14.1: simplex device: DMA disabled [ 0.976304] ide1: DMA disabled [ 0.976305] Probing IDE interface ide0... [ 2.048254] hdb: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive [ 2.048285] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.048777] hdb: UDMA/33 mode selected [ 2.049359] Probing IDE interface ide1... [ 2.616283] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.624641] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.624825] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.624856] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.624903] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 2.624926] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000 [ 2.684250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.684252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.684254] usb usb2: Product: OHCI Host Controller [ 2.684255] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 2.684256] usb usb2: SerialNumber: 0000:00:12.0 [ 2.684293] usb usb2: configuration #1 chosen from 1 choice [ 2.684310] hub 2-0:1.0: USB hub found [ 2.684318] hub 2-0:1.0: 3 ports detected [ 2.684497] ahci 0000:00:11.0: version 3.0 [ 2.684507] alloc irq_desc for 22 on cpu 0 node 0 [ 2.684509] alloc kstat_irqs on cpu 0 node 0 [ 2.684513] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.684549] alloc irq_desc for 26 on cpu 0 node 0 [ 2.684550] alloc kstat_irqs on cpu 0 node 0 [ 2.684559] ahci 0000:00:11.0: irq 26 for MSI/MSI-X [ 2.684651] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.684654] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.684924] scsi0 : ahci [ 2.685045] scsi1 : ahci [ 2.685104] scsi2 : ahci [ 2.685160] scsi3 : ahci [ 2.685215] scsi4 : ahci [ 2.685272] scsi5 : ahci [ 2.685350] ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 26 [ 2.685353] ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 26 [ 2.685355] ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 26 [ 2.685358] ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 26 [ 2.685360] ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff00 irq 26 [ 2.685363] ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff80 irq 26 [ 2.685488] alloc irq_desc for 19 on cpu 0 node 0 [ 2.685490] alloc kstat_irqs on cpu 0 node 0 [ 2.685493] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.685504] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.685542] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.685571] ehci_hcd 0000:00:13.2: debug port 1 [ 2.685583] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcff400 [ 2.696251] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.696261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.696263] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.696264] usb usb3: Product: EHCI Host Controller [ 2.696266] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 2.696267] usb usb3: SerialNumber: 0000:00:13.2 [ 2.696295] usb usb3: configuration #1 chosen from 1 choice [ 2.696310] hub 3-0:1.0: USB hub found [ 2.696315] hub 3-0:1.0: 6 ports detected [ 2.696624] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.696634] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.696675] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.696690] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000 [ 2.756242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.756244] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.756245] usb usb4: Product: OHCI Host Controller [ 2.756246] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 2.756247] usb usb4: SerialNumber: 0000:00:12.1 [ 2.756275] usb usb4: configuration #1 chosen from 1 choice [ 2.756291] hub 4-0:1.0: USB hub found [ 2.756298] hub 4-0:1.0: 3 ports detected [ 2.756472] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.756482] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.756517] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.756536] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000 [ 2.816247] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.816249] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.816251] usb usb5: Product: OHCI Host Controller [ 2.816252] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 2.816253] usb usb5: SerialNumber: 0000:00:13.0 [ 2.816287] usb usb5: configuration #1 chosen from 1 choice [ 2.816303] hub 5-0:1.0: USB hub found [ 2.816309] hub 5-0:1.0: 3 ports detected [ 2.816487] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.816498] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.816533] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.816547] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000 [ 2.876248] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.876250] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.876251] usb usb6: Product: OHCI Host Controller [ 2.876252] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 2.876253] usb usb6: SerialNumber: 0000:00:13.1 [ 2.876284] usb usb6: configuration #1 chosen from 1 choice [ 2.876301] hub 6-0:1.0: USB hub found [ 2.876307] hub 6-0:1.0: 3 ports detected [ 2.876594] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.876606] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.876641] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.876656] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000 [ 2.936245] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.936247] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.936248] usb usb7: Product: OHCI Host Controller [ 2.936249] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 2.936251] usb usb7: SerialNumber: 0000:00:14.5 [ 2.936285] usb usb7: configuration #1 chosen from 1 choice [ 2.936301] hub 7-0:1.0: USB hub found [ 2.936307] hub 7-0:1.0: 2 ports detected [ 3.005776] ata2: SATA link down (SStatus 0 SControl 300) [ 3.005800] ata6: SATA link down (SStatus 0 SControl 300) [ 3.005822] ata5: SATA link down (SStatus 0 SControl 300) [ 3.005843] ata4: SATA link down (SStatus 0 SControl 300) [ 3.088257] usb 4-2: new low speed USB device using ohci_hcd and address 2 [ 3.168262] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.168281] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.175137] ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 3.175139] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.175154] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 3.175156] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.182364] ata1.00: configured for UDMA/133 [ 3.182379] ata3.00: configured for UDMA/133 [ 3.196312] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 3.196416] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5 [ 3.200547] ide-cd driver 5.00 [ 3.202162] ide-cd: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache [ 3.202165] Uniform CD-ROM driver Revision: 3.20 [ 3.205340] Driver 'sd' needs updating - please use bus_type methods [ 3.205439] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.205444] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 3.205448] sd 0:0:0:0: [sda] Write Protect is off [ 3.205450] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.205454] sd 2:0:0:0: [sdb] Write Protect is off [ 3.205456] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.205461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.205466] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.205539] sda:<6> sdb: sdb1 sdb2 < sda1 sda2 < sda5 > sda3 sda4 [ 3.239815] sdb5 > sdb3 [ 3.250606] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.254632] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.258260] usb 4-2: New USB device found, idVendor=046d, idProduct=c404 [ 3.258262] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.258264] usb 4-2: Product: Trackball [ 3.258265] usb 4-2: Manufacturer: Logitech [ 3.258311] usb 4-2: configuration #1 chosen from 1 choice [ 3.264216] usbcore: registered new interface driver hiddev [ 3.270662] input: Logitech Trackball as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2 [ 3.270694] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:12.1-2/input0 [ 3.270704] usbcore: registered new interface driver usbhid [ 3.270706] usbhid: v2.6:USB HID core driver [ 3.580175] kjournald starting. Commit interval 5 seconds [ 3.580184] EXT3-fs: mounted filesystem with ordered data mode. [ 4.458039] udev: starting version 141 [ 4.909210] ACPI: WMI: Mapper loaded [ 4.914686] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 4.917684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.917709] ACPI: Power Button [PWRF] [ 4.917760] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 4.917775] ACPI: Power Button [PWRB] [ 4.942731] processor ACPI_CPU:00: registered as cooling_device0 [ 4.942735] ACPI: Processor [P001] (supports 8 throttling states) [ 4.943126] processor ACPI_CPU:01: registered as cooling_device1 [ 4.943507] processor ACPI_CPU:02: registered as cooling_device2 [ 4.943881] processor ACPI_CPU:03: registered as cooling_device3 [ 4.945020] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.945260] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.004048] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 5.004051] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 5.004098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.229737] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.288712] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.288733] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 5.885748] EXT3 FS on sda4, internal journal [ 5.952118] it87: Found IT8720F chip at 0x290, revision 2 [ 5.952125] it87: in3 is VCC (+5V) [ 5.952126] it87: in7 is VCCH (+5V Stand-By) [ 7.054111] alloc irq_desc for 27 on cpu 0 node 0 [ 7.054113] alloc kstat_irqs on cpu 0 node 0 [ 7.054125] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X [ 7.054243] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 7.054974] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.055707] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.107242] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 7.107284] powernow-k8: 0 : pstate 0 (3200 MHz) [ 7.107286] powernow-k8: 1 : pstate 1 (2500 MHz) [ 7.107287] powernow-k8: 2 : pstate 2 (2100 MHz) [ 7.107289] powernow-k8: 3 : pstate 3 (800 MHz) [ 7.676807] lp: driver loaded but no devices found [ 7.685134] ppdev: user-space parallel port driver [ 10.337210] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.453362] [drm] Initialized drm 1.1.0 20060810 [ 10.466261] pci 0000:01:05.0: setting latency timer to 64 [ 10.466503] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0 [ 10.816372] [drm] Setting GART location based on new memory map [ 10.816689] [drm] Loading RS780 CP Microcode [ 10.816691] platform r600_cp.0: firmware: requesting radeon/RS780_cp.bin [ 10.914434] r600_cp: Failed to load firmware "radeon/RS780_cp.bin" [ 10.914442] [drm:r600_do_init_cp] *ERROR* Failed to load firmware! [ 17.653510] eth0: no IPv6 routers present [ 282.049596] device-mapper: uevent: version 1.0.3 [ 282.050101] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 547.682886] md: md0 stopped. [ 547.685061] md: bind [ 547.685354] md: bind [ 547.685365] md: md0: raid array is not clean -- starting background reconstruction [ 547.708856] md: raid1 personality registered for level 1 [ 547.709757] raid1: raid set md0 active with 2 out of 2 mirrors [ 547.709901] md: resync of RAID array md0 [ 547.709909] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 547.709915] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 547.709925] md: using 128k window, over a total of 488279488 blocks. [ 547.709930] md: resuming resync of md0 from checkpoint. [ 547.710637] md0: unknown partition table [ 1229.604867] kjournald starting. Commit interval 5 seconds [ 1229.877564] EXT3 FS on sda1, internal journal [ 1229.877576] EXT3-fs: mounted filesystem with ordered data mode. [ 1895.360272] kjournald starting. Commit interval 5 seconds [ 1895.366343] EXT3 FS on dm-0, internal journal [ 1895.366354] EXT3-fs: mounted filesystem with ordered data mode. [ 2280.720380] INFO: task kjournald:1168 blocked for more than 120 seconds. [ 2280.720388] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2280.720395] kjournald D ffff88002807a0c0 0 1168 2 [ 2280.720405] ffff88022f19e140 0000000000000046 ffff880217bd2c28 ffff880217bc06e0 [ 2280.720415] 0000000000000086 00000000000120c0 000000000000e250 ffff88022f244280 [ 2280.720424] ffff88022f244570 0000000200000000 0000000000000000 ffffffff8020e5a9 [ 2280.720432] Call Trace: [ 2280.720448] [] ? __switch_to+0xae/0x263 [ 2280.720458] [] ? set_next_entity+0x34/0x56 [ 2280.720469] [] ? schedule+0x9/0x1d [ 2280.720500] [] ? journal_commit_transaction+0x108/0xdf6 [jbd] [ 2280.720510] [] ? autoremove_wake_function+0x0/0x2e [ 2280.720520] [] ? try_to_del_timer_sync+0x52/0x5b [ 2280.720541] [] ? kjournald+0xe4/0x229 [jbd] [ 2280.720549] [] ? autoremove_wake_function+0x0/0x2e [ 2280.720568] [] ? kjournald+0x0/0x229 [jbd] [ 2280.720585] [] ? kjournald+0x0/0x229 [jbd] [ 2280.720594] [] ? kthread+0x54/0x80 [ 2280.720602] [] ? child_rip+0xa/0x20 [ 2280.720611] [] ? kthread+0x0/0x80 [ 2280.720617] [] ? child_rip+0x0/0x20 [ 2280.720644] INFO: task konqueror:2948 blocked for more than 120 seconds. [ 2280.720648] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2280.720654] konqueror D ffff8800280940c0 0 2948 2868 [ 2280.720662] ffff88022c50b690 0000000000000082 ffff88020dd4cc90 ffffffff802dd7f7 [ 2280.720671] 00000000ffffffff 00000000000120c0 000000000000e250 ffff88022c63a400 [ 2280.720679] ffff88022c63a6f0 0000000310dc8748 ffff880217bd2bc0 ffff880217bd2c28 [ 2280.720687] Call Trace: [ 2280.720695] [] ? __find_get_block+0x176/0x186 [ 2280.720705] [] ? read_tsc+0xa/0x20 [ 2280.720712] [] ? sync_buffer+0x0/0x40 [ 2280.720719] [] ? schedule+0x9/0x1d [ 2280.720727] [] ? io_schedule+0x63/0xa5 [ 2280.720734] [] ? sync_buffer+0x3b/0x40 [ 2280.720742] [] ? __wait_on_bit+0x41/0x70 [ 2280.720748] [] ? sync_buffer+0x0/0x40 [ 2280.720757] [] ? out_of_line_wait_on_bit+0x6b/0x77 [ 2280.720764] [] ? wake_bit_function+0x0/0x23 [ 2280.720793] [] ? ext3_find_entry+0x3aa/0x558 [ext3] [ 2280.720802] [] ? kmem_getpages+0xdc/0x12b [ 2280.720809] [] ? cache_alloc_refill+0x6d/0x1f9 [ 2280.720837] [] ? ext3_lookup+0x30/0xe4 [ext3] [ 2280.720845] [] ? __lookup_hash+0xc6/0xe7 [ 2280.720853] [] ? do_filp_open+0x1e2/0x85a [ 2280.720862] [] ? alloc_fd+0x67/0x10c [ 2280.720869] [] ? do_sys_open+0x4b/0xc8 [ 2280.720878] [] ? system_call_fastpath+0x16/0x1b [ 2280.720891] INFO: task groupadd:10911 blocked for more than 120 seconds. [ 2280.720895] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2280.720900] groupadd D ffff88002807a0c0 0 10911 10910 [ 2280.720908] ffff88022f171510 0000000000000086 ffff88022ac8f978 00000000000e0201 [ 2280.720916] ffff88022ac0e610 00000000000120c0 000000000000e250 ffff88022b50e300 [ 2280.720924] ffff88022b50e5f0 000000022b42ac48 ffff88022e8ef200 0000000000000000 [ 2280.720932] Call Trace: [ 2280.720940] [] ? read_tsc+0xa/0x20 [ 2280.720947] [] ? sync_buffer+0x0/0x40 [ 2280.720955] [] ? schedule+0x9/0x1d [ 2280.720962] [] ? io_schedule+0x63/0xa5 [ 2280.720969] [] ? sync_buffer+0x3b/0x40 [ 2280.720977] [] ? __wait_on_bit_lock+0x3f/0x84 [ 2280.720984] [] ? sync_buffer+0x0/0x40 [ 2280.720992] [] ? out_of_line_wait_on_bit_lock+0x6b/0x77 [ 2280.720999] [] ? wake_bit_function+0x0/0x23 [ 2280.721021] [] ? __find_get_block+0x176/0x186 [ 2280.721042] [] ? do_get_write_access+0x6a/0x409 [jbd] [ 2280.721055] [] ? __getblk+0x1e/0x295 [ 2280.721079] [] ? journal_get_write_access+0x22/0x33 [jbd] [ 2280.721115] [] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3] [ 2280.721146] [] ? ext3_reserve_inode_write+0x3e/0x75 [ext3] [ 2280.721177] [] ? ext3_mark_inode_dirty+0x16/0x31 [ext3] [ 2280.721208] [] ? ext3_rename+0x486/0x555 [ext3] [ 2280.721221] [] ? vfs_rename+0x215/0x36e [ 2280.721233] [] ? sys_renameat+0x16d/0x1e9 [ 2280.721246] [] ? sys_newlstat+0x23/0x30 [ 2280.721260] [] ? system_call_fastpath+0x16/0x1b [ 2640.720039] INFO: task pdflush:262 blocked for more than 120 seconds. [ 2640.720047] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.720054] pdflush D ffff8800280600c0 0 262 2 [ 2640.720063] ffff88022f1614d0 0000000000000046 ffffe2000523e358 ffffe2000523e3c8 [ 2640.720073] ffffe20006021fd8 00000000000120c0 000000000000e250 ffff88022f26c340 [ 2640.720082] ffff88022f26c630 00000001296df738 0000000000000008 ffff8802296df738 [ 2640.720091] Call Trace: [ 2640.720108] [] ? __switch_to+0xae/0x263 [ 2640.720120] [] ? __mutex_lock_common+0x10f/0x17f [ 2640.720130] [] ? mutex_lock+0x12/0x28 [ 2640.720139] [] ? sync_supers+0x42/0xa6 [ 2640.720147] [] ? wb_kupdate+0x2f/0x121 [ 2640.720156] [] ? pdflush+0x159/0x23b [ 2640.720164] [] ? wb_kupdate+0x0/0x121 [ 2640.720171] [] ? pdflush+0x0/0x23b [ 2640.720181] [] ? kthread+0x54/0x80 [ 2640.720188] [] ? child_rip+0xa/0x20 [ 2640.720197] [] ? kthread+0x0/0x80 [ 2640.720203] [] ? child_rip+0x0/0x20 [ 2640.720213] INFO: task kjournald:1168 blocked for more than 120 seconds. [ 2640.720217] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.720222] kjournald D ffff8800280940c0 0 1168 2 [ 2640.720230] ffff88022c50b690 0000000000000046 000000002b037ca0 0000000000000001 [ 2640.720239] ffff8802111b9200 00000000000120c0 000000000000e250 ffff88022f244280 [ 2640.720248] ffff88022f244570 0000000300000001 ffff88022e91f370 ffffffff8025b4d5 [ 2640.720256] Call Trace: [ 2640.720265] [] ? getnstimeofday+0x55/0xaf [ 2640.720273] [] ? ktime_get_ts+0x21/0x49 [ 2640.720281] [] ? read_tsc+0xa/0x20 [ 2640.720289] [] ? sync_buffer+0x0/0x40 [ 2640.720297] [] ? schedule+0x9/0x1d [ 2640.720304] [] ? io_schedule+0x63/0xa5 [ 2640.720311] [] ? sync_buffer+0x3b/0x40 [ 2640.720319] [] ? __wait_on_bit+0x41/0x70 [ 2640.720326] [] ? sync_buffer+0x0/0x40 [ 2640.720334] [] ? out_of_line_wait_on_bit+0x6b/0x77 [ 2640.720341] [] ? wake_bit_function+0x0/0x23 [ 2640.720372] [] ? journal_commit_transaction+0x8f5/0xdf6 [jbd] [ 2640.720383] [] ? lock_timer_base+0x26/0x4c [ 2640.720405] [] ? kjournald+0xe4/0x229 [jbd] [ 2640.720412] [] ? autoremove_wake_function+0x0/0x2e [ 2640.720431] [] ? kjournald+0x0/0x229 [jbd] [ 2640.720449] [] ? kjournald+0x0/0x229 [jbd] [ 2640.720457] [] ? kthread+0x54/0x80 [ 2640.720464] [] ? child_rip+0xa/0x20 [ 2640.720473] [] ? kthread+0x0/0x80 [ 2640.720480] [] ? child_rip+0x0/0x20 [ 2640.720494] INFO: task Xorg:2614 blocked for more than 120 seconds. [ 2640.720499] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.720503] Xorg D ffff8800280940c0 0 2614 2598 [ 2640.720511] ffff88022c50b690 0000000000000086 ffff88022d1b3978 000000000003d08f [ 2640.720519] 0000000000000282 00000000000120c0 000000000000e250 ffff88022e90a2c0 [ 2640.720528] ffff88022e90a5b0 000000032d1b3978 ffff88022d1b3d48 ffffffff80256fa5 [ 2640.720535] Call Trace: [ 2640.720543] [] ? hrtimer_cancel+0xc/0x16 [ 2640.720551] [] ? schedule_hrtimeout_range+0xc8/0xf3 [ 2640.720560] [] ? read_tsc+0xa/0x20 [ 2640.720567] [] ? sync_buffer+0x0/0x40 [ 2640.720574] [] ? schedule+0x9/0x1d [ 2640.720582] [] ? io_schedule+0x63/0xa5 [ 2640.720588] [] ? sync_buffer+0x3b/0x40 [ 2640.720596] [] ? __wait_on_bit_lock+0x3f/0x84 [ 2640.720603] [] ? sync_buffer+0x0/0x40 [ 2640.720611] [] ? out_of_line_wait_on_bit_lock+0x6b/0x77 [ 2640.720618] [] ? wake_bit_function+0x0/0x23 [ 2640.720625] [] ? __find_get_block+0x176/0x186 [ 2640.720645] [] ? do_get_write_access+0x6a/0x409 [jbd] [ 2640.720652] [] ? __getblk+0x1e/0x295 [ 2640.720661] [] ? __alloc_skb+0x66/0x138 [ 2640.720681] [] ? journal_get_write_access+0x22/0x33 [jbd] [ 2640.720713] [] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3] [ 2640.720740] [] ? ext3_reserve_inode_write+0x3e/0x75 [ext3] [ 2640.720765] [] ? ext3_mark_inode_dirty+0x16/0x31 [ext3] [ 2640.720784] [] ? journal_start+0x9a/0xce [jbd] [ 2640.720809] [] ? ext3_dirty_inode+0x63/0x7b [ext3] [ 2640.720819] [] ? __mark_inode_dirty+0x29/0x18a [ 2640.720828] [] ? file_update_time+0xb0/0xf5 [ 2640.720836] [] ? __generic_file_aio_write_nolock+0x16e/0x293 [ 2640.720844] [] ? generic_file_aio_write+0x64/0xc4 [ 2640.720869] [] ? ext3_file_write+0x16/0x96 [ext3] [ 2640.720877] [] ? do_sync_write+0xce/0x113 [ 2640.720884] [] ? autoremove_wake_function+0x0/0x2e [ 2640.720893] [] ? synchronize_rcu+0x45/0x4b [ 2640.720901] [] ? rcu_start_gp+0xdc/0x112 [ 2640.720908] [] ? vfs_write+0xa9/0x102 [ 2640.720916] [] ? sys_write+0x45/0x6e [ 2640.720924] [] ? system_call_fastpath+0x16/0x1b [ 2640.720933] INFO: task plasma-desktop:2912 blocked for more than 120 seconds. [ 2640.720937] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.720942] plasma-deskto D ffff8800280940c0 0 2912 1 [ 2640.720950] ffff88022e90a2c0 0000000000000082 ffff88022c835e68 ffff8802294ef118 [ 2640.720958] ffff88022947ee00 00000000000120c0 000000000000e250 ffff88022e900fe0 [ 2640.720966] ffff88022e9012d0 00000003294ce118 ffffffff802c8532 ffff8802111fa000 [ 2640.720974] Call Trace: [ 2640.720981] [] ? inode_permission+0x82/0xa1 [ 2640.720989] [] ? __link_path_walk+0x12b/0x70b [ 2640.720998] [] ? __mutex_lock_common+0x10f/0x17f [ 2640.721022] [] ? mutex_lock+0x12/0x28 [ 2640.721029] [] ? do_filp_open+0x1da/0x85a [ 2640.721043] [] ? alloc_fd+0x67/0x10c [ 2640.721054] [] ? do_sys_open+0x4b/0xc8 [ 2640.721067] [] ? system_call_fastpath+0x16/0x1b [ 2640.721078] INFO: task konqueror:2948 blocked for more than 120 seconds. [ 2640.721085] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.721094] konqueror D ffff8800280940c0 0 2948 2868 [ 2640.721108] ffff88022f333590 0000000000000082 ffff88022a959e68 ffff8802294ef118 [ 2640.721128] ffff88022947ee00 00000000000120c0 000000000000e250 ffff88022c63a400 [ 2640.721147] ffff88022c63a6f0 00000003294ce118 ffffffff802c8532 ffff88022ccdc000 [ 2640.721166] Call Trace: [ 2640.721177] [] ? inode_permission+0x82/0xa1 [ 2640.721188] [] ? __link_path_walk+0x12b/0x70b [ 2640.721202] [] ? __mutex_lock_common+0x10f/0x17f [ 2640.721214] [] ? mutex_lock+0x12/0x28 [ 2640.721226] [] ? do_filp_open+0x1da/0x85a [ 2640.721238] [] ? alloc_fd+0x67/0x10c [ 2640.721249] [] ? do_sys_open+0x4b/0xc8 [ 2640.721261] [] ? system_call_fastpath+0x16/0x1b [ 2640.721271] INFO: task konsole:2997 blocked for more than 120 seconds. [ 2640.721278] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.721287] konsole D ffff8800280460c0 0 2997 1 [ 2640.721300] ffff88022e90a2c0 0000000000000082 ffff880210ddd198 ffff880210dc3678 [ 2640.721319] 0000000000000000 00000000000120c0 000000000000e250 ffff88022f2bc500 [ 2640.721338] ffff88022f2bc7f0 00000000802dd825 ffff8802214bd118 000000010000000b [ 2640.721357] Call Trace: [ 2640.721369] [] ? schedule+0x9/0x1d [ 2640.721393] [] ? do_get_write_access+0x208/0x409 [jbd] [ 2640.721404] [] ? wake_bit_function+0x0/0x23 [ 2640.721417] [] ? __getblk+0x1e/0x295 [ 2640.721440] [] ? journal_get_write_access+0x22/0x33 [jbd] [ 2640.721473] [] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3] [ 2640.721503] [] ? ext3_new_inode+0x4e9/0x9d9 [ext3] [ 2640.721532] [] ? start_this_handle+0x2cd/0x33e [jbd] [ 2640.721565] [] ? ext3_create+0x8f/0x10c [ext3] [ 2640.721577] [] ? vfs_create+0x6d/0x89 [ 2640.721589] [] ? do_filp_open+0x2a8/0x85a [ 2640.721603] [] ? do_sys_open+0x4b/0xc8 [ 2640.721616] [] ? system_call_fastpath+0x16/0x1b [ 2640.721626] INFO: task xulrunner-stub:9276 blocked for more than 120 seconds. [ 2640.721634] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2640.721642] xulrunner-stu D ffff8800280460c0 0 9276 2928 [ 2640.721656] ffffffff805c2390 0000000000000086 ffffffff00000001 ffff88020dcbde70 [ 2640.721676] ffff88022d0eded8 00000000000120c0 000000000000e250 ffff88022c4aade0 [ 2640.721695] ffff88022c4ab0d0 000000000025e00a 0000000000001000 ffffffff8025465f [ 2640.721714] Call Trace: [ 2640.721725] [] ? bit_waitqueue+0x10/0xa0 [ 2640.721735] [] ? wake_up_bit+0x11/0x22 [ 2640.721746] [] ? bit_waitqueue+0x10/0xa0 [ 2640.721758] [] ? schedule+0x9/0x1d [ 2640.721781] [] ? do_get_write_access+0x208/0x409 [jbd] [ 2640.721793] [] ? wake_bit_function+0x0/0x23 [ 2640.721816] [] ? journal_get_write_access+0x22/0x33 [jbd] [ 2640.721850] [] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3] [ 2640.721882] [] ? ext3_orphan_add+0x7c/0x15e [ext3] [ 2640.721912] [] ? ext3_mark_inode_dirty+0x28/0x31 [ext3] [ 2640.721944] [] ? ext3_unlink+0x166/0x1b4 [ext3] [ 2640.721956] [] ? vfs_unlink+0x72/0xb2 [ 2640.721968] [] ? do_unlinkat+0xad/0x134 [ 2640.721980] [] ? filp_close+0x5b/0x62 [ 2640.721993] [] ? system_call_fastpath+0x16/0x1b [ 7671.134661] md: md0: resync done. [ 7671.262254] RAID1 conf printout: [ 7671.262261] --- wd:2 rd:2 [ 7671.262267] disk 0, wo:0, o:1, dev:sda5 [ 7671.262273] disk 1, wo:0, o:1, dev:sdb5