| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 10 Feb 2010 15:22:08 +0530
From: "Hiremath, Vaibhav" <hvaibhav@...com>
To: Stephen Rothwell <sfr@...b.auug.org.au>,
Tomi Valkeinen <tomi.valkeinen@...ia.com>
CC: "linux-next@...r.kernel.org" <linux-next@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Tony Lindgren <tony@...mide.com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>
Subject: RE: linux-next: manual merge of the omap_dss2 tree with the omap
tree
Thanks,
Vaibhav Hiremath
Platform Support Products
Texas Instruments Inc
Ph: +91-80-25099927
> -----Original Message-----
> From: Stephen Rothwell [mailto:sfr@...b.auug.org.au]
> Sent: Monday, February 08, 2010 11:55 AM
> To: Tomi Valkeinen
> Cc: linux-next@...r.kernel.org; linux-kernel@...r.kernel.org;
> Hiremath, Vaibhav; Tony Lindgren; linux-omap@...r.kernel.org
> Subject: linux-next: manual merge of the omap_dss2 tree with the
> omap tree
>
> Hi Tomi,
>
> Today's linux-next merge of the omap_dss2 tree got a conflict in
> arch/arm/mach-omap2/board-am3517evm.c between commit
> 13560d875d67c06239c82a6148c1b87075701fe9 ("AM3517: Enable basic I2C
> Support") from the omap tree and commit
> 56a3d0235cd50d14d7bd4d45e55d192aa0e78cac ("OMAP: AM3517: Enable DSS2
> for
> AM3517EVM board") from the omap_dss2 tree.
>
> Juts overlapping additions. I fixed it up (see below) and can
> carry the
> fix as necessary.
>
> P.S. Tomi, this omap_dss2 commit only has your Acked-by not Signed-
> off-by.
> --
> Cheers,
> Stephen Rothwell sfr@...b.auug.org.au
>
> diff --cc arch/arm/mach-omap2/board-am3517evm.c
> index a166bcc,54af5f8..0000000
> --- a/arch/arm/mach-omap2/board-am3517evm.c
> +++ b/arch/arm/mach-omap2/board-am3517evm.c
> @@@ -33,15 -33,147 +34,156 @@@
>
> #include "mux.h"
>
[Hiremath, Vaibhav] I don't see display.h being added here, but when I looked into linux-next repo, I could see that. I think the following commit only shows for the conflicted part, so should be ok.
Thanks,
Vaibhav
> + #define LCD_PANEL_PWR 176
> + #define LCD_PANEL_BKLIGHT_PWR 182
> + #define LCD_PANEL_PWM 181
> +
> + static int lcd_enabled;
> + static int dvi_enabled;
> +
> + static void __init am3517_evm_display_init(void)
> + {
> + int r;
> +
> + omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
> + omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR,
> OMAP_PIN_INPUT_PULLDOWN);
> + omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
> + /*
> + * Enable GPIO 182 = LCD Backlight Power
> + */
> + r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
> + if (r) {
> + printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
> + return;
> + }
> + gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
> + /*
> + * Enable GPIO 181 = LCD Panel PWM
> + */
> + r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
> + if (r) {
> + printk(KERN_ERR "failed to get lcd_pwm\n");
> + goto err_1;
> + }
> + gpio_direction_output(LCD_PANEL_PWM, 1);
> + /*
> + * Enable GPIO 176 = LCD Panel Power enable pin
> + */
> + r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
> + if (r) {
> + printk(KERN_ERR "failed to get lcd_panel_pwr\n");
> + goto err_2;
> + }
> + gpio_direction_output(LCD_PANEL_PWR, 1);
> +
> + printk(KERN_INFO "Display initialized successfully\n");
> + return;
> +
> + err_2:
> + gpio_free(LCD_PANEL_PWM);
> + err_1:
> + gpio_free(LCD_PANEL_BKLIGHT_PWR);
> + }
> +
> + static int am3517_evm_panel_enable_lcd(struct omap_dss_device
> *dssdev)
> + {
> + if (dvi_enabled) {
> + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
> + return -EINVAL;
> + }
> + gpio_set_value(LCD_PANEL_PWR, 1);
> + lcd_enabled = 1;
> +
> + return 0;
> + }
> +
> + static void am3517_evm_panel_disable_lcd(struct omap_dss_device
> *dssdev)
> + {
> + gpio_set_value(LCD_PANEL_PWR, 0);
> + lcd_enabled = 0;
> + }
> +
> + static struct omap_dss_device am3517_evm_lcd_device = {
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .name = "lcd",
> + .driver_name = "sharp_lq_panel",
> + .phy.dpi.data_lines = 16,
> + .platform_enable = am3517_evm_panel_enable_lcd,
> + .platform_disable = am3517_evm_panel_disable_lcd,
> + };
> +
> + static int am3517_evm_panel_enable_tv(struct omap_dss_device
> *dssdev)
> + {
> + return 0;
> + }
> +
> + static void am3517_evm_panel_disable_tv(struct omap_dss_device
> *dssdev)
> + {
> + }
> +
> + static struct omap_dss_device am3517_evm_tv_device = {
> + .type = OMAP_DISPLAY_TYPE_VENC,
> + .name = "tv",
> + .driver_name = "venc",
> + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
> + .platform_enable = am3517_evm_panel_enable_tv,
> + .platform_disable = am3517_evm_panel_disable_tv,
> + };
> +
> + static int am3517_evm_panel_enable_dvi(struct omap_dss_device
> *dssdev)
> + {
> + if (lcd_enabled) {
> + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
> + return -EINVAL;
> + }
> + dvi_enabled = 1;
> +
> + return 0;
> + }
> +
> + static void am3517_evm_panel_disable_dvi(struct omap_dss_device
> *dssdev)
> + {
> + dvi_enabled = 0;
> + }
> +
> + static struct omap_dss_device am3517_evm_dvi_device = {
> + .type = OMAP_DISPLAY_TYPE_DPI,
> + .name = "dvi",
> + .driver_name = "generic_panel",
> + .phy.dpi.data_lines = 24,
> + .platform_enable = am3517_evm_panel_enable_dvi,
> + .platform_disable = am3517_evm_panel_disable_dvi,
> + };
> +
> + static struct omap_dss_device *am3517_evm_dss_devices[] = {
> + &am3517_evm_lcd_device,
> + &am3517_evm_tv_device,
> + &am3517_evm_dvi_device,
> + };
> +
> + static struct omap_dss_board_info am3517_evm_dss_data = {
> + .num_devices = ARRAY_SIZE(am3517_evm_dss_devices),
> + .devices = am3517_evm_dss_devices,
> + .default_device = &am3517_evm_lcd_device,
> + };
> +
> + struct platform_device am3517_evm_dss_device = {
> + .name = "omapdss",
> + .id = -1,
> + .dev = {
> + .platform_data = &am3517_evm_dss_data,
> + },
> + };
> +
> +static int __init am3517_evm_i2c_init(void)
> +{
> + omap_register_i2c_bus(1, 400, NULL, 0);
> + omap_register_i2c_bus(2, 400, NULL, 0);
> + omap_register_i2c_bus(3, 400, NULL, 0);
> +
> + return 0;
> +}
> +
> /*
> * Board initialization
> */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists