| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 11 Feb 2010 13:13:41 +0800
From: Wu Fengguang <fengguang.wu@...el.com>
To: Nikanth Karthikesan <knikanth@...e.de>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
"balbir@...ux.vnet.ibm.com" <balbir@...ux.vnet.ibm.com>,
Jens Axboe <jens.axboe@...cle.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mm@...ck.org" <linux-mm@...ck.org>,
Christian Ehrhardt <ehrhardt@...ux.vnet.ibm.com>
Subject: Re: [PATCH v2] Make vm_max_readahead configurable at run-time
On Wed, Feb 10, 2010 at 09:52:40PM +0800, Nikanth Karthikesan wrote:
> On Wednesday 10 February 2010 16:35:51 Wu Fengguang wrote:
> > Nikanth,
> >
> > > Make vm_max_readahead configurable at run-time. Expose a sysctl knob
> > > in procfs to change it. This would ensure that new disks added would
> > > use this value as their default read_ahead_kb.
> >
> > Do you have use case, or customer demand for it?
> >
>
> No body requested for it. But when doing some performance testing with
> readahead_kb re-compiling would be a pain, and thought that having a
> configurable default might be useful.
I wonder why you need to recompile kernel in the tests.
There are three interfaces to change readahead size in runtime:
blockdev --setra 1024 /dev/sda
echo 512 > /sys/block/*/queue/read_ahead_kb
echo 512 > /sys/devices/virtual/bdi/*/read_ahead_kb
> > > Also filesystems which use default_backing_dev_info would also
> > > use this new value, even if they were already mounted.
> > >
> > > Currently xfs, btrfs, nilfs, raw, mtd use the default_backing_dev_info.
> >
> > This sounds like bad interface, in that users will be confused by the
> > tricky details of "works for new devices" and "works for some fs".
> >
> > One more tricky point is, btrfs/md/dm readahead size may not be
> > influenced if some of the component disks are hot added.
> >
> > So this patch is only going to work for hot-plugged disks that
> > contains _standalone_ filesystem. Is this typical use case in servers?
> >
>
> Yes, it would work only if the top-level disk is hot-plugged/created.
Or maybe what you really want is a kernel parameter for setting the
default readahead size at boot time?
In another thread, Christian Ehrhardt recommended to add a config
option for it. If you like it, I can also do the kernel parameter
by the way.
Thanks,
Fengguang
> > > Signed-off-by: Nikanth Karthikesan <knikanth@...e.de>
> > >
> > > ---
> > >
> > > Index: linux-2.6/block/blk-core.c
> > > ===================================================================
> > > --- linux-2.6.orig/block/blk-core.c
> > > +++ linux-2.6/block/blk-core.c
> > > @@ -499,7 +499,7 @@ struct request_queue *blk_alloc_queue_no
> > > q->backing_dev_info.unplug_io_fn = blk_backing_dev_unplug;
> > > q->backing_dev_info.unplug_io_data = q;
> > > q->backing_dev_info.ra_pages =
> > > - (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
> > > + (vm_max_readahead_kb * 1024) / PAGE_CACHE_SIZE;
> > > q->backing_dev_info.state = 0;
> > > q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
> > > q->backing_dev_info.name = "block";
> > > Index: linux-2.6/fs/fuse/inode.c
> > > ===================================================================
> > > --- linux-2.6.orig/fs/fuse/inode.c
> > > +++ linux-2.6/fs/fuse/inode.c
> > > @@ -870,7 +870,7 @@ static int fuse_bdi_init(struct fuse_con
> > > int err;
> > >
> > > fc->bdi.name = "fuse";
> > > - fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
> > > + fc->bdi.ra_pages = (vm_max_readahead_kb * 1024) / PAGE_CACHE_SIZE;
> > > fc->bdi.unplug_io_fn = default_unplug_io_fn;
> > > /* fuse does it's own writeback accounting */
> > > fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
> > > Index: linux-2.6/include/linux/mm.h
> > > ===================================================================
> > > --- linux-2.6.orig/include/linux/mm.h
> > > +++ linux-2.6/include/linux/mm.h
> > > @@ -1188,7 +1188,11 @@ int write_one_page(struct page *page, in
> > > void task_dirty_inc(struct task_struct *tsk);
> > >
> > > /* readahead.c */
> > > -#define VM_MAX_READAHEAD 128 /* kbytes */
> > > +#define INITIAL_VM_MAX_READAHEAD_KB 128
> > > +extern unsigned long vm_max_readahead_kb;
> > > +
> > > +int sysctl_vm_max_readahead_kb_handler(struct ctl_table *table, int
> > > write, + void __user *buffer, size_t *length, loff_t *ppos);
> > >
> > > int force_page_cache_readahead(struct address_space *mapping, struct
> > > file *filp, pgoff_t offset, unsigned long nr_to_read);
> > > Index: linux-2.6/mm/backing-dev.c
> > > ===================================================================
> > > --- linux-2.6.orig/mm/backing-dev.c
> > > +++ linux-2.6/mm/backing-dev.c
> > > @@ -18,7 +18,8 @@ EXPORT_SYMBOL(default_unplug_io_fn);
> > >
> > > struct backing_dev_info default_backing_dev_info = {
> > > .name = "default",
> > > - .ra_pages = VM_MAX_READAHEAD * 1024 / PAGE_CACHE_SIZE,
> > > + .ra_pages = INITIAL_VM_MAX_READAHEAD_KB
> > > + >> (PAGE_CACHE_SHIFT - 10),
> > > .state = 0,
> > > .capabilities = BDI_CAP_MAP_COPY,
> > > .unplug_io_fn = default_unplug_io_fn,
> > > Index: linux-2.6/mm/readahead.c
> > > ===================================================================
> > > --- linux-2.6.orig/mm/readahead.c
> > > +++ linux-2.6/mm/readahead.c
> > > @@ -17,6 +17,19 @@
> > > #include <linux/pagevec.h>
> > > #include <linux/pagemap.h>
> > >
> > > +unsigned long vm_max_readahead_kb = INITIAL_VM_MAX_READAHEAD_KB;
> > > +
> > > +int sysctl_vm_max_readahead_kb_handler(struct ctl_table *table, int
> > > write, + void __user *buffer, size_t *length, loff_t *ppos)
> > > +{
> > > + proc_doulongvec_minmax(table, write, buffer, length, ppos);
> > > +
> > > + default_backing_dev_info.ra_pages =
> > > + vm_max_readahead_kb >> (PAGE_CACHE_SHIFT - 10);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > /*
> > > * Initialise a struct file's readahead state. Assumes that the caller
> > > has * memset *ra to zero.
> > > Index: linux-2.6/kernel/sysctl.c
> > > ===================================================================
> > > --- linux-2.6.orig/kernel/sysctl.c
> > > +++ linux-2.6/kernel/sysctl.c
> > > @@ -1273,7 +1273,13 @@ static struct ctl_table vm_table[] = {
> > > .extra2 = &one,
> > > },
> > > #endif
> > > -
> > > + {
> > > + .procname = "max_readahead_kb",
> > > + .data = &vm_max_readahead_kb,
> > > + .maxlen = sizeof(vm_max_readahead_kb),
> > > + .mode = 0644,
> > > + .proc_handler = sysctl_vm_max_readahead_kb_handler,
> > > + },
> > > { }
> > > };
> > >
> > > Index: linux-2.6/Documentation/sysctl/vm.txt
> > > ===================================================================
> > > --- linux-2.6.orig/Documentation/sysctl/vm.txt
> > > +++ linux-2.6/Documentation/sysctl/vm.txt
> > > @@ -31,6 +31,7 @@ Currently, these files are in /proc/sys/
> > > - laptop_mode
> > > - legacy_va_layout
> > > - lowmem_reserve_ratio
> > > +- max_readahead_kb
> > > - max_map_count
> > > - memory_failure_early_kill
> > > - memory_failure_recovery
> > > @@ -263,6 +264,18 @@ The minimum value is 1 (1/1 -> 100%).
> > >
> > > ==============================================================
> > >
> > > +max_readahead_kb:
> > > +
> > > +This file contains the default maximum readahead that would be
> > > +used, when new disks would be added to the system.
> > > +
> > > +Also filesystems which use default_backing_dev_info would also
> > > +use this new value, even if they were already mounted.
> > > +
> > > +xfs, btrfs, nilfs, raw, mtd use the default_backing_dev_info.
> > > +
> > > +==============================================================
> > > +
> > > max_map_count:
> > >
> > > This file contains the maximum number of memory map areas a process
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists