Linux version 2.6.32testing (root@salon) (gcc version 4.3.3 (Debian 4.3.3-10) ) #2 SMP PREEMPT Sat Jan 23 13:29:25 EST 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x7fef0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CDFFF write-protect CE000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 10000-15000 RAMDISK: 36bae000 - 37fefa84 Allocated new RAMDISK: 013e6000 - 02827a84 Move RAMDISK from 0000000036bae000 - 0000000037fefa83 to 013e6000 - 02827a83 ACPI: RSDP 000f7900 00024 (v02 Nvidia) ACPI: XSDT 7fef30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 7fefa600 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 7fef3240 07354 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) ACPI: FACS 7fef0000 00040 ACPI: HPET 7fefa840 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 7fefa8c0 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 7fefa740 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: SSDT 7fefae20 0032C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 1158MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00011000 - 00017f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 00013de7c4] TEXT DATA BSS ==> [0001000000 - 00013de7c4] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] #5 [00013df000 - 00013e5149] BRK ==> [00013df000 - 00013e5149] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] #7 [00013e6000 - 0002827a84] NEW RAMDISK ==> [00013e6000 - 0002827a84] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] found SMP MP-table at [c00f5d50] f5d50 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007fef0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009c 0: 0x00000100 -> 0x0007fef0 On node 0 totalpages: 523900 free_area_init_node: node 0, pgdat c1324fc0, node_mem_map c2829200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3948 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2318 pages used for memmap HighMem zone: 294372 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfeff0000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009c000 - 000000000009d000 PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 11 pages/cpu @c3c00000 s23512 r0 d21544 u1048576 pcpu-alloc: s23512 r0 d21544 u1048576 alloc=1*4194304 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519806 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32testing root=/dev/mapper/nvidia_ceebaiib1 ro single PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0007fef0) Memory: 2052264k/2096064k available (2319k kernel code, 42156k reserved, 912k data, 404k init, 1186760k highmem) virtual kernel memory layout: fixmap : 0xfff6b000 - 0xfffff000 ( 592 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1329000 - 0xc138e000 ( 404 kB) .data : 0xc1243e41 - 0xc1328128 ( 912 kB) .text : 0xc1000000 - 0xc1243e41 (2319 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2133.606 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4267.21 BogoMIPS (lpj=2133606) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090903 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... works. CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4266.57 BogoMIPS (lpj=2133288) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8533.78 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 PM: Adding info for No Bus:platform Time: 10:38:08 Date: 02/17/10 NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 EISA bus registered ACPI: bus type pci registered PM: Adding info for No Bus:id PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access PM: Adding info for No Bus:default bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:LNXSYSTM:00 PM: Adding info for acpi:LNXCPU:00 PM: Adding info for acpi:LNXCPU:01 PM: Adding info for acpi:LNXCPU:02 PM: Adding info for acpi:LNXCPU:03 PM: Adding info for acpi:LNXSYBUS:00 PM: Adding info for acpi:PNP0C0C:00 PM: Adding info for acpi:PNP0A08:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:device:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:device:09 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:device:16 PM: Adding info for acpi:device:17 PM: Adding info for acpi:device:18 PM: Adding info for acpi:device:19 PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0103:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:device:1a PM: Adding info for acpi:device:1b PM: Adding info for acpi:device:1c PM: Adding info for acpi:device:1d PM: Adding info for acpi:device:1e PM: Adding info for acpi:device:1f PM: Adding info for acpi:NVRAIDBUS:00 PM: Adding info for acpi:ATK0110:00 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0C0F:08 PM: Adding info for acpi:PNP0C0F:09 PM: Adding info for acpi:PNP0C0F:0a PM: Adding info for acpi:PNP0C0F:0b PM: Adding info for acpi:PNP0C0F:0c PM: Adding info for acpi:PNP0C0F:0d PM: Adding info for acpi:PNP0C0F:0e PM: Adding info for acpi:PNP0C0F:0f PM: Adding info for acpi:PNP0C0F:10 PM: Adding info for acpi:PNP0C0F:11 PM: Adding info for acpi:PNP0C0F:12 PM: Adding info for acpi:PNP0C0F:13 PM: Adding info for acpi:PNP0C0F:14 PM: Adding info for acpi:PNP0C0F:15 PM: Adding info for acpi:PNP0C0F:16 PM: Adding info for acpi:PNP0C0F:17 PM: Adding info for acpi:PNP0C0F:18 PM: Adding info for acpi:PNP0C0F:19 PM: Adding info for acpi:PNP0C0F:1a PM: Adding info for acpi:PNP0C0F:1b PM: Adding info for acpi:PNP0C0F:1c PM: Adding info for acpi:PNP0C0F:1d PM: Adding info for acpi:PNP0C0F:1e PM: Adding info for acpi:PNP0C0F:1f PM: Adding info for acpi:PNP0C0F:20 PM: Adding info for acpi:PNP0C0F:21 PM: Adding info for acpi:PNP0C0F:22 PM: Adding info for acpi:PNP0C0F:23 PM: Adding info for acpi:PNP0C0F:24 PM: Adding info for acpi:PNP0C0F:25 PM: Adding info for acpi:PNP0C0F:26 PM: Adding info for acpi:PNP0C0F:27 PM: Adding info for acpi:PNP0C0F:28 PM: Adding info for acpi:PNP0C02:02 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:LNXTHERM:00 PM: Adding info for acpi:PNP0C0B:00 PM: Adding info for acpi:LNXTHERM:01 PM: Adding info for acpi:LNXPWRBN:00 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) PM: Adding info for No Bus:pci0000:00 PM: Adding info for No Bus:0000:00 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f] pci 0000:00:0a.1: reg 24 io port: [0x5100-0x513f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xd5006000-0xd5006fff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: reg 10 32bit mmio: [0xd5007000-0xd50070ff] pci 0000:00:0b.1: supports D1 D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:0d.0: reg 20 io port: [0xf000-0xf00f] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] pci 0000:00:0e.0: reg 20 io port: [0xd400-0xd40f] pci 0000:00:0e.0: reg 24 32bit mmio: [0xd5004000-0xd5004fff] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] pci 0000:00:0f.0: reg 20 io port: [0xe800-0xe80f] pci 0000:00:0f.0: reg 24 32bit mmio: [0xd5005000-0xd5005fff] pci 0000:00:10.1: reg 10 32bit mmio: [0xd5000000-0xd5003fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd0ffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd1000000-0xd1ffffff] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xd2000000-0xd201ffff] pci 0000:00:02.0: bridge io port: [0xa000-0xafff] pci 0000:00:02.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:06:06.0: reg 10 32bit mmio: [0xd4001000-0xd40017ff] pci 0000:06:06.0: reg 14 io port: [0xb000-0xb07f] pci 0000:06:06.0: supports D2 pci 0000:06:06.0: PME# supported from D2 D3hot D3cold pci 0000:06:06.0: PME# disabled pci 0000:06:07.0: reg 10 io port: [0xb400-0xb4ff] pci 0000:06:07.0: reg 14 32bit mmio: [0xd4000000-0xd40000ff] pci 0000:06:07.0: reg 30 32bit mmio pref: [0xd3000000-0xd301ffff] pci 0000:06:07.0: supports D1 D2 pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold pci 0000:06:07.0: PME# disabled pci 0000:00:10.0: transparent bridge pci 0000:00:10.0: bridge io port: [0xb000-0xbfff] pci 0000:00:10.0: bridge 32bit mmio: [0xd3000000-0xd4ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:00.1 PM: Adding info for pci:0000:00:00.2 PM: Adding info for pci:0000:00:00.3 PM: Adding info for pci:0000:00:00.4 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:01.1 PM: Adding info for pci:0000:00:01.2 PM: Adding info for pci:0000:00:01.3 PM: Adding info for pci:0000:00:01.4 PM: Adding info for pci:0000:00:01.5 PM: Adding info for pci:0000:00:01.6 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:04.0 PM: Adding info for pci:0000:00:05.0 PM: Adding info for pci:0000:00:06.0 PM: Adding info for pci:0000:00:07.0 PM: Adding info for pci:0000:00:09.0 PM: Adding info for pci:0000:00:0a.0 PM: Adding info for pci:0000:00:0a.1 PM: Adding info for pci:0000:00:0a.2 PM: Adding info for pci:0000:00:0b.0 PM: Adding info for pci:0000:00:0b.1 PM: Adding info for pci:0000:00:0d.0 PM: Adding info for pci:0000:00:0e.0 PM: Adding info for pci:0000:00:0f.0 PM: Adding info for pci:0000:00:10.0 PM: Adding info for pci:0000:00:10.1 PM: Adding info for pci:0000:01:00.0 PM: Adding info for No Bus:0000:01 PM: Adding info for No Bus:0000:02 PM: Adding info for No Bus:0000:03 PM: Adding info for No Bus:0000:04 PM: Adding info for No Bus:0000:05 PM: Adding info for pci:0000:06:06.0 PM: Adding info for pci:0000:06:07.0 PM: Adding info for No Bus:0000:06 ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 PM: Adding info for No Bus:vga_arbiter vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PM: Adding info for No Bus:lo hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource tsc pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:01: ioport range 0x4000-0x407f has been reserved system 00:01: ioport range 0x4080-0x40ff has been reserved system 00:01: ioport range 0x4400-0x447f has been reserved system 00:01: ioport range 0x4480-0x44ff has been reserved system 00:01: ioport range 0x4800-0x487f has been reserved system 00:01: ioport range 0x4880-0x48ff has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x800-0x87f has been reserved system 00:02: ioport range 0x290-0x297 has been reserved system 00:02: ioport range 0x880-0x88f has been reserved system 00:08: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xdbc00-0xdbfff has been reserved system 00:09: iomem range 0xf0000-0xf7fff could not be reserved system 00:09: iomem range 0xf8000-0xfbfff could not be reserved system 00:09: iomem range 0xfc000-0xfffff could not be reserved system 00:09: iomem range 0xfeff0000-0xfeff00ff has been reserved system 00:09: iomem range 0x7fef0000-0x7fefffff could not be reserved system 00:09: iomem range 0xffff0000-0xffffffff has been reserved system 00:09: iomem range 0x0-0x9ffff could not be reserved system 00:09: iomem range 0x100000-0x7feeffff could not be reserved system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:09: iomem range 0xfeff0000-0xfeff03ff could not be reserved PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg pci 0000:06:07.0: BAR 6: address space collision on of device [0xd3000000-0xd301ffff] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xa000-0xafff pci 0000:00:02.0: MEM window: 0xd0000000-0xd2ffffff pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:06 pci 0000:00:10.0: IO window: 0xb000-0xbfff pci 0000:00:10.0: MEM window: 0xd3000000-0xd4ffffff pci 0000:00:10.0: PREFETCH window: 0x80000000-0x800fffff pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] pci_bus 0000:06: resource 0 io: [0xb000-0xbfff] pci_bus 0000:06: resource 1 mem: [0xd3000000-0xd4ffffff] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x800fffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 20742k freed PM: Adding info for No Bus:mcelog PM: Adding info for No Bus:msr0 PM: Adding info for No Bus:msr1 PM: Adding info for platform:pcspkr PM: Adding info for No Bus:snapshot highmem bounce pool size: 64 pages ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 1733 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pcieport 0000:00:02.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:02.0:pcie08 pcieport 0000:00:04.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:04.0:pcie08 pcieport 0000:00:05.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:05.0:pcie08 pcieport 0000:00:06.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:06.0:pcie08 pcieport 0000:00:07.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:07.0:pcie08 PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:hpet PM: Adding info for No Bus:isa PM: Adding info for No Bus:ram0 PM: Adding info for No Bus:1:0 PM: Adding info for No Bus:ram1 PM: Adding info for No Bus:1:1 PM: Adding info for No Bus:ram2 PM: Adding info for No Bus:1:2 PM: Adding info for No Bus:ram3 PM: Adding info for No Bus:1:3 PM: Adding info for No Bus:ram4 PM: Adding info for No Bus:1:4 PM: Adding info for No Bus:ram5 PM: Adding info for No Bus:1:5 PM: Adding info for No Bus:ram6 PM: Adding info for No Bus:1:6 PM: Adding info for No Bus:ram7 PM: Adding info for No Bus:1:7 PM: Adding info for No Bus:ram8 PM: Adding info for No Bus:1:8 PM: Adding info for No Bus:ram9 PM: Adding info for No Bus:1:9 PM: Adding info for No Bus:ram10 PM: Adding info for No Bus:1:10 PM: Adding info for No Bus:ram11 PM: Adding info for No Bus:1:11 PM: Adding info for No Bus:ram12 PM: Adding info for No Bus:1:12 PM: Adding info for No Bus:ram13 PM: Adding info for No Bus:1:13 PM: Adding info for No Bus:ram14 PM: Adding info for No Bus:1:14 PM: Adding info for No Bus:ram15 PM: Adding info for No Bus:1:15 brd: module loaded PNP: No PS/2 controller found. Probing ports directly. PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 PM: Adding info for No Bus:mice PM: Adding info for No Bus:psaux mice: PS/2 mouse device common for all mice PM: Adding info for platform:eisa.0 EISA: Probing bus 0 at eisa.0 PM: Removing info for platform:eisa.0 cpuidle: using governor ladder TCP cubic registered Using IPI No-Shortcut mode PM: Adding info for No Bus:cpu_dma_latency PM: Adding info for No Bus:network_latency PM: Adding info for No Bus:network_throughput PM: Checking image partition /dev/hda6 PM: Resume from disk failed. Magic number: 14:890:628 Freeing unused kernel memory: 404k freed NET: Registered protocol family 1 PM: Adding info for No Bus:cooling_device0 fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) PM: Adding info for No Bus:thermal_zone0 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) Uniform Multi-Platform E-IDE driver SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb amd74xx 0000:00:0d.0: UDMA133 controller amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1) amd74xx 0000:00:0d.0: IDE port disabled amd74xx 0000:00:0d.0: BIOS didn't set cable bits correctly. Enabling workaround. amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf008-0xf00f Probing IDE interface ide0... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 r8169 0000:06:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 r8169 0000:06:07.0: no PCI Express capability PM: Adding info for No Bus:eth0 eth0: RTL8169sb/8110sb at 0xf8b0a000, 00:14:d1:1a:ac:15, XID 10000000 IRQ 17 udev: renamed network interface eth0 to eth1 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ohci1394 0000:06:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 PM: Adding info for ieee1394:fw-host0 PM: Adding info for No Bus:fw-host0 libata version 3.00 loaded. ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d4001000-d40017ff] Max Packet=[2] IR/IT contexts=[4/8] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to set max_packet_size to 512 bytes hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide0 PM: Adding info for No Bus:ide0 hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected ide0 at 0x170-0x177,0x376 on irq 15 PM: Adding info for ide:0.0 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: reset hcs_params 0x101888 dbg=1 cc=1 pcc=8 !ppc ports=8 ehci_hcd 0000:00:0b.1: reset portroute 0 0 0 0 0 0 0 0 ehci_hcd 0000:00:0b.1: reset hcc_params a086 caching frame 256/512/1024 park ehci_hcd 0000:00:0b.1: park 0 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported ehci_hcd 0000:00:0b.1: supports USB remote wakeup ehci_hcd 0000:00:0b.1: irq 23, io mem 0xd5007000 ehci_hcd 0000:00:0b.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:0b.1: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32testing ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 PM: Adding info for usb:usb1 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) PM: Adding info for usb:1-0:1.0 usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.1 drivers/usb/core/inode.c: creating file '001' PM: Adding info for No Bus:ep_00 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller drivers/usb/core/inode.c: creating file '002' ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: created debug files ohci_hcd 0000:00:0b.0: supports USB remote wakeup ohci_hcd 0000:00:0b.0: irq 22, io mem 0xd5006000 usb usb1: uevent usb usb1: uevent PM: Adding info for ieee1394:001106000000bd66 PM: Adding info for No Bus:001106000000bd66 ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000000bd66] PM: Adding info for ieee1394:001a66fffee31809 PM: Adding info for No Bus:001a66fffee31809 ieee1394: Node added: ID:BUS[0-01:1023] GUID[001a66fffee31809] PM: Adding info for ieee1394:001a66fffee31809-0 PM: Adding info for No Bus:001a66fffee31809-0 PM: Adding info for ieee1394:001a66fffee31809-1 PM: Adding info for No Bus:001a66fffee31809-1 ohci_hcd 0000:00:0b.0: OHCI controller state ohci_hcd 0000:00:0b.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:0b.0: control 0x683 RWE RWC HCFS=operational CBSR=3 ohci_hcd 0000:00:0b.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:0b.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:0b.0: intrenable 0x8000004a MIE RHSC RD WDH ohci_hcd 0000:00:0b.0: hcca frame #0003 ohci_hcd 0000:00:0b.0: roothub.a 01000208 POTPGT=1 NPS NDP=8(8) ohci_hcd 0000:00:0b.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:0b.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:0b.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [3] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [4] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [5] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [6] 0x00000100 PPS ohci_hcd 0000:00:0b.0: roothub.portstatus [7] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32testing ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 PM: Adding info for usb:usb2 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) PM: Adding info for usb:2-0:1.0 usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: trying to enable port power on non-switchable hub PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev2.1 drivers/usb/core/inode.c: creating file '001' PM: Adding info for No Bus:ep_00 sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 sata_nv 0000:00:0e.0: Using SWNCQ mode sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv PM: Adding info for scsi:host0 PM: Adding info for No Bus:host0 scsi1 : sata_nv PM: Adding info for scsi:host1 PM: Adding info for No Bus:host1 ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21 usb usb2: uevent ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:0f.0: Using SWNCQ mode sata_nv 0000:00:0f.0: setting latency timer to 64 usb usb2: uevent scsi2 : sata_nv PM: Adding info for scsi:host2 PM: Adding info for No Bus:host2 scsi3 : sata_nv PM: Adding info for scsi:host3 PM: Adding info for No Bus:host3 ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 20 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 20 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1: status 0501 change 0001 ehci_hcd 0000:00:0b.1: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2: status 0501 change 0001 ehci_hcd 0000:00:0b.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3: status 0501 change 0001 ehci_hcd 0000:00:0b.1: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 6: status 0501 change 0001 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000 hub 1-0:1.0: state 7 ports 8 chg 004e evt 0000 hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:0b.1: port 2 high speed ehci_hcd 0000:00:0b.1: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 1-2: new high speed USB device using ehci_hcd and address 3 ata3: SATA link down (SStatus 0 SControl 300) ehci_hcd 0000:00:0b.1: port 2 high speed ehci_hcd 0000:00:0b.1: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 1-2: default language 0x0409 usb 1-2: udev 3, busnum 1, minor = 2 usb 1-2: New USB device found, idVendor=058f, idProduct=6362 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: Mass Storage Device usb 1-2: Manufacturer: Generic usb 1-2: SerialNumber: 058F312D81B PM: Adding info for usb:1-2 usb 1-2: uevent usb 1-2: usb_probe_device usb 1-2: configuration #1 chosen from 1 choice usb 1-2: adding 1-2:1.0 (config #1, interface 0) PM: Adding info for usb:1-2:1.0 usb 1-2:1.0: uevent PM: Adding info for No Bus:ep_01 PM: Adding info for No Bus:ep_82 PM: Adding info for No Bus:usbdev1.3 drivers/usb/core/inode.c: creating file '003' PM: Adding info for No Bus:ep_00 hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s usb 1-2: uevent usb 1-2: uevent Initializing USB Mass Storage driver... usb-storage 1-2:1.0: usb_probe_interface usb-storage 1-2:1.0: usb_probe_interface - got id scsi4 : SCSI emulation for USB Mass Storage devices PM: Adding info for scsi:host4 PM: Adding info for No Bus:host4 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ehci_hcd 0000:00:0b.1: port 3 high speed ehci_hcd 0000:00:0b.1: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 PM: Adding info for scsi:target0:0:0 PM: Adding info for scsi:0:0:0:0 PM: Adding info for No Bus:0:0:0:0 PM: Adding info for No Bus:0:0:0:0 usb 1-3: new high speed USB device using ehci_hcd and address 4 ehci_hcd 0000:00:0b.1: port 3 high speed ehci_hcd 0000:00:0b.1: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT usb 1-3: default language 0x0409 usb 1-3: udev 4, busnum 1, minor = 3 usb 1-3: New USB device found, idVendor=05e3, idProduct=0605 usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3: Product: USB2.0 Hub PM: Adding info for usb:1-3 usb 1-3: uevent usb 1-3: usb_probe_device usb 1-3: configuration #1 chosen from 1 choice usb 1-3: adding 1-3:1.0 (config #1, interface 0) PM: Adding info for usb:1-3:1.0 usb 1-3:1.0: uevent hub 1-3:1.0: usb_probe_interface hub 1-3:1.0: usb_probe_interface - got id hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected hub 1-3:1.0: standalone hub hub 1-3:1.0: individual port power switching hub 1-3:1.0: individual port over-current protection hub 1-3:1.0: Single TT hub 1-3:1.0: TT requires at most 32 FS bit times (2664 ns) hub 1-3:1.0: Port indicators are supported hub 1-3:1.0: power on to power good time: 100ms usb 1-3: uevent hub 1-3:1.0: local power source is good hub 1-3:1.0: enabling power on all ports PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.4 drivers/usb/core/inode.c: creating file '004' PM: Adding info for No Bus:ep_00 hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s usb 1-3: uevent ehci_hcd 0000:00:0b.1: port 6 high speed ehci_hcd 0000:00:0b.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT hub 1-3:1.0: port 1: status 0101 change 0001 usb 1-6: new high speed USB device using ehci_hcd and address 5 ehci_hcd 0000:00:0b.1: port 6 high speed ehci_hcd 0000:00:0b.1: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT usb 1-3: link qh256-0001/c1c77d40 start 1 [1/0 us] usb 1-6: udev 5, busnum 1, minor = 4 usb 1-6: New USB device found, idVendor=0409, idProduct=0059 usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 PM: Adding info for usb:1-6 usb 1-6: uevent usb 1-6: usb_probe_device usb 1-6: configuration #1 chosen from 1 choice usb 1-6: adding 1-6:1.0 (config #1, interface 0) PM: Adding info for usb:1-6:1.0 usb 1-6:1.0: uevent hub 1-6:1.0: usb_probe_interface hub 1-6:1.0: usb_probe_interface - got id hub 1-6:1.0: USB hub found hub 1-6:1.0: 4 ports detected hub 1-6:1.0: standalone hub hub 1-6:1.0: individual port power switching hub 1-6:1.0: individual port over-current protection hub 1-6:1.0: Single TT hub 1-6:1.0: TT requires at most 16 FS bit times (1332 ns) hub 1-6:1.0: Port indicators are supported hub 1-6:1.0: power on to power good time: 100ms hub 1-6:1.0: local power source is good hub 1-6:1.0: enabling power on all ports usb 1-6: uevent PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.5 usb 1-6: uevent drivers/usb/core/inode.c: creating file '005' PM: Adding info for No Bus:ep_00 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) hub 1-6:1.0: port 1: status 0301 change 0001 hub 1-6:1.0: port 3: status 0101 change 0001 hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133 ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-3:1.0: state 7 ports 4 chg 0002 evt 0000 hub 1-3:1.0: port 1, status 0101, change 0000, 12 Mb/s hub 1-3:1.0: port 1 not reset yet, waiting 10ms usb 1-6: link qh256-0001/c1c77e40 start 2 [1/0 us] ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 PM: Adding info for scsi:target1:0:0 PM: Adding info for scsi:1:0:0:0 PM: Adding info for No Bus:1:0:0:0 PM: Adding info for No Bus:1:0:0:0 usb 1-3.1: new high speed USB device using ehci_hcd and address 6 usb 1-3.1: udev 6, busnum 1, minor = 5 usb 1-3.1: New USB device found, idVendor=0409, idProduct=0059 usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 PM: Adding info for usb:1-3.1 usb 1-3.1: uevent usb 1-3.1: usb_probe_device usb 1-3.1: configuration #1 chosen from 1 choice usb 1-3.1: adding 1-3.1:1.0 (config #1, interface 0) PM: Adding info for usb:1-3.1:1.0 usb 1-3.1:1.0: uevent hub 1-3.1:1.0: usb_probe_interface hub 1-3.1:1.0: usb_probe_interface - got id hub 1-3.1:1.0: USB hub found hub 1-3.1:1.0: 4 ports detected hub 1-3.1:1.0: standalone hub hub 1-3.1:1.0: individual port power switching hub 1-3.1:1.0: individual port over-current protection hub 1-3.1:1.0: Single TT hub 1-3.1:1.0: TT requires at most 16 FS bit times (1332 ns) hub 1-3.1:1.0: Port indicators are supported hub 1-3.1:1.0: power on to power good time: 100ms hub 1-3.1:1.0: local power source is good hub 1-3.1:1.0: enabling power on all ports usb 1-3.1: uevent PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.6 drivers/usb/core/inode.c: creating file '006' PM: Adding info for No Bus:ep_00 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s usb 1-3.1: uevent hub 1-3.1:1.0: port 1: status 0301 change 0001 hub 1-3.1:1.0: port 2: status 0101 change 0001 hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-6:1.0: state 7 ports 4 chg 000a evt 0000 hub 1-6:1.0: port 1, status 0301, change 0000, 1.5 Mb/s hub 1-6:1.0: port 1 not reset yet, waiting 10ms usb 1-3.1: link qh256-0001/c1c77e80 start 3 [1/0 us] usb 1-6.1: new low speed USB device using ehci_hcd and address 7 hub 1-6:1.0: port 1 not reset yet, waiting 10ms usb 1-6.1: skipped 1 descriptor after interface usb 1-6.1: default language 0x0409 usb 1-6.1: udev 7, busnum 1, minor = 6 usb 1-6.1: New USB device found, idVendor=2222, idProduct=3100 usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.1: Product: Macally ECOMouse usb 1-6.1: Manufacturer: Macally Peripherals PM: Adding info for usb:1-6.1 usb 1-6.1: uevent usb 1-6.1: usb_probe_device usb 1-6.1: configuration #1 chosen from 1 choice usb 1-6.1: adding 1-6.1:1.0 (config #1, interface 0) PM: Adding info for usb:1-6.1:1.0 usb 1-6.1:1.0: uevent PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.7 drivers/usb/core/inode.c: creating file '007' PM: Adding info for No Bus:ep_00 hub 1-6:1.0: port 3, status 0101, change 0000, 12 Mb/s usb 1-6.1: uevent usb 1-6.1: uevent usbcore: registered new interface driver hiddev usbhid 1-6.1:1.0: usb_probe_interface usbhid 1-6.1:1.0: usb_probe_interface - got id PM: Adding info for hid:0003:2222:3100.0001 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) PM: Adding info for No Bus:input0 input: Macally Peripherals Macally ECOMouse as /devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.1/1-6.1:1.0/input/input0 PM: Adding info for No Bus:mouse0 generic-usb 0003:2222:3100.0001: input: USB HID v1.00 Mouse [Macally Peripherals Macally ECOMouse ] on usb-0000:00:0b.1-6.1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver hub 1-6:1.0: port 3 not reset yet, waiting 10ms ata4.00: ATAPI: ATAPI iHOS104, WL08, max UDMA/100 ata4.00: configured for UDMA/100 usb 1-6.3: new full speed USB device using ehci_hcd and address 8 hub 1-6:1.0: port 3 not reset yet, waiting 10ms usb 1-6.3: ep0 maxpacket = 8 usb 1-6.3: default language 0x0409 usb 1-6.3: udev 8, busnum 1, minor = 7 usb 1-6.3: New USB device found, idVendor=05e3, idProduct=0604 usb 1-6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-6.3: Product: USB Hub PM: Adding info for usb:1-6.3 usb 1-6.3: uevent usb 1-6.3: usb_probe_device usb 1-6.3: configuration #1 chosen from 1 choice usb 1-6.3: adding 1-6.3:1.0 (config #1, interface 0) PM: Adding info for usb:1-6.3:1.0 usb 1-6.3:1.0: uevent hub 1-6.3:1.0: usb_probe_interface hub 1-6.3:1.0: usb_probe_interface - got id hub 1-6.3:1.0: USB hub found usb 1-6.3: uevent hub 1-6.3:1.0: 4 ports detected hub 1-6.3:1.0: standalone hub hub 1-6.3:1.0: individual port power switching hub 1-6.3:1.0: individual port over-current protection hub 1-6.3:1.0: power on to power good time: 100ms hub 1-6.3:1.0: local power source is good hub 1-6.3:1.0: enabling power on all ports PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.8 drivers/usb/core/inode.c: creating file '008' PM: Adding info for No Bus:ep_00 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s usb 1-6.3: uevent hub 1-6.3:1.0: port 3: status 0301 change 0001 hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130301 PRSC PESC CSC LSDA PPS CCS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-3.1:1.0: state 7 ports 4 chg 0006 evt 0000 hub 1-3.1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s hub 1-3.1:1.0: port 1 not reset yet, waiting 10ms usb 1-6.3: link qh128-0e01/c1c66400 start 4 [1/2 us] usb 1-3.1.1: new low speed USB device using ehci_hcd and address 9 hub 1-3.1:1.0: port 1 not reset yet, waiting 10ms usb 1-3.1.1: skipped 1 descriptor after interface usb 1-3.1.1: skipped 1 descriptor after interface usb 1-3.1.1: default language 0x0409 usb 1-3.1.1: udev 9, busnum 1, minor = 8 usb 1-3.1.1: New USB device found, idVendor=10d5, idProduct=0004 usb 1-3.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-3.1.1: Product: PS2 to USB AdapterA3 PM: Adding info for usb:1-3.1.1 usb 1-3.1.1: uevent usb 1-3.1.1: usb_probe_device usb 1-3.1.1: configuration #1 chosen from 1 choice usb 1-3.1.1: uevent usb 1-3.1.1: adding 1-3.1.1:1.0 (config #1, interface 0) PM: Adding info for usb:1-3.1.1:1.0 usb 1-3.1.1:1.0: uevent usbhid 1-3.1.1:1.0: usb_probe_interface usbhid 1-3.1.1:1.0: usb_probe_interface - got id PM: Adding info for hid:0003:10D5:0004.0002 PM: Adding info for No Bus:input1 input: PS2 to USB AdapterA3 as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.0/input/input1 usb 1-3.1.1: link qh8-0e01/c1c66700 start 5 [1/2 us] generic-usb 0003:10D5:0004.0002: input: USB HID v1.10 Keyboard [PS2 to USB AdapterA3] on usb-0000:00:0b.1-3.1.1/input0 PM: Adding info for No Bus:ep_81 usb 1-3.1.1: adding 1-3.1.1:1.1 (config #1, interface 1) PM: Adding info for usb:1-3.1.1:1.1 usb 1-3.1.1:1.1: uevent usbhid 1-3.1.1:1.1: usb_probe_interface usbhid 1-3.1.1:1.1: usb_probe_interface - got id PM: Adding info for hid:0003:10D5:0004.0003 PM: Adding info for No Bus:input2 input: PS2 to USB AdapterA3 as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.1/1-3.1.1/1-3.1.1:1.1/input/input2 usb 1-3.1.1: link qh8-0e01/c1c667c0 start 6 [1/2 us] PM: Adding info for No Bus:mouse1 generic-usb 0003:10D5:0004.0003: input: USB HID v1.10 Mouse [PS2 to USB AdapterA3] on usb-0000:00:0b.1-3.1.1/input1 PM: Adding info for No Bus:ep_82 PM: Adding info for No Bus:usbdev1.9 drivers/usb/core/inode.c: creating file '009' PM: Adding info for No Bus:ep_00 usb 1-3.1.1: uevent hub 1-3.1:1.0: port 2, status 0101, change 0000, 12 Mb/s hub 1-3.1:1.0: port 2 not reset yet, waiting 10ms usb 1-3.1.2: new high speed USB device using ehci_hcd and address 10 hub 1-3.1:1.0: port 2 not reset yet, waiting 10ms usb 1-3.1.2: default language 0x0409 usb 1-3.1.2: udev 10, busnum 1, minor = 9 usb 1-3.1.2: New USB device found, idVendor=05e3, idProduct=0605 usb 1-3.1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-3.1.2: Product: USB2.0 Hub PM: Adding info for usb:1-3.1.2 usb 1-3.1.2: uevent usb 1-3.1.2: usb_probe_device usb 1-3.1.2: configuration #1 chosen from 1 choice usb 1-3.1.2: adding 1-3.1.2:1.0 (config #1, interface 0) PM: Adding info for usb:1-3.1.2:1.0 usb 1-3.1.2:1.0: uevent hub 1-3.1.2:1.0: usb_probe_interface hub 1-3.1.2:1.0: usb_probe_interface - got id hub 1-3.1.2:1.0: USB hub found hub 1-3.1.2:1.0: 4 ports detected hub 1-3.1.2:1.0: standalone hub hub 1-3.1.2:1.0: individual port power switching hub 1-3.1.2:1.0: individual port over-current protection hub 1-3.1.2:1.0: Single TT hub 1-3.1.2:1.0: TT requires at most 32 FS bit times (2664 ns) hub 1-3.1.2:1.0: Port indicators are supported hub 1-3.1.2:1.0: power on to power good time: 100ms usb 1-3.1.2: uevent hub 1-3.1.2:1.0: local power source is good hub 1-3.1.2:1.0: enabling power on all ports PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.10 drivers/usb/core/inode.c: creating file '010' PM: Adding info for No Bus:ep_00 hub 1-6:1.0: state 7 ports 4 chg 0000 evt 0002 usb 1-3.1.2: uevent hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 1-3.1.2:1.0: port 1: status 0101 change 0001 hub 1-3.1.2:1.0: port 2: status 0301 change 0001 hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-6.3:1.0: state 7 ports 4 chg 0008 evt 0000 hub 1-6.3:1.0: port 3, status 0301, change 0000, 1.5 Mb/s usb 1-3.1.2: link qh256-0001/c1c66900 start 7 [1/0 us] usb 1-6.3.3: new low speed USB device using ehci_hcd and address 11 usb 1-6.3.3: skipped 1 descriptor after interface usb 1-6.3.3: skipped 1 descriptor after interface usb 1-6.3.3: default language 0x0409 usb 1-6.3.3: udev 11, busnum 1, minor = 10 usb 1-6.3.3: New USB device found, idVendor=2222, idProduct=0013 usb 1-6.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6.3.3: Product: Macally iKeySlim usb 1-6.3.3: Manufacturer: Macally Peripherals PM: Adding info for usb:1-6.3.3 usb 1-6.3.3: uevent usb 1-6.3.3: usb_probe_device usb 1-6.3.3: configuration #1 chosen from 1 choice usb 1-6.3.3: uevent usb 1-6.3.3: adding 1-6.3.3:1.0 (config #1, interface 0) PM: Adding info for usb:1-6.3.3:1.0 usb 1-6.3.3:1.0: uevent usbhid 1-6.3.3:1.0: usb_probe_interface usbhid 1-6.3.3:1.0: usb_probe_interface - got id PM: Adding info for hid:0003:2222:0013.0004 PM: Adding info for No Bus:input3 input: Macally Peripherals Macally iKeySlim as /devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.3/1-6.3.3/1-6.3.3:1.0/input/input3 usb 1-6.3.3: link qh8-0e01/c1c66c00 start 0 [1/2 us] generic-usb 0003:2222:0013.0004: input: USB HID v1.10 Keyboard [Macally Peripherals Macally iKeySlim] on usb-0000:00:0b.1-6.3.3/input0 PM: Adding info for No Bus:ep_81 usb 1-6.3.3: adding 1-6.3.3:1.1 (config #1, interface 1) PM: Adding info for usb:1-6.3.3:1.1 usb 1-6.3.3:1.1: uevent usbhid 1-6.3.3:1.1: usb_probe_interface usbhid 1-6.3.3:1.1: usb_probe_interface - got id PM: Adding info for hid:0003:2222:0013.0005 PM: Adding info for No Bus:input4 input: Macally Peripherals Macally iKeySlim as /devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.3/1-6.3.3/1-6.3.3:1.1/input/input4 usb 1-6.3.3: link qh8-0e01/c1c66d40 start 1 [1/2 us] PM: Adding info for No Bus:mouse2 generic-usb 0003:2222:0013.0005: input: USB HID v1.10 Mouse [Macally Peripherals Macally iKeySlim] on usb-0000:00:0b.1-6.3.3/input1 PM: Adding info for No Bus:ep_82 PM: Adding info for No Bus:usbdev1.11 drivers/usb/core/inode.c: creating file '011' PM: Adding info for No Bus:ep_00 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s usb 1-6.3.3: uevent hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 1-6.3:1.0: state 7 ports 4 chg 0000 evt 0008 hub 1-3.1.2:1.0: state 7 ports 4 chg 0006 evt 0000 hub 1-3.1.2:1.0: port 1, status 0101, change 0000, 12 Mb/s hub 1-3.1.2:1.0: port 1 not reset yet, waiting 10ms usb 1-3.1.2.1: new high speed USB device using ehci_hcd and address 13 hub 1-3.1.2:1.0: port 1 not reset yet, waiting 10ms usb 1-3.1.2.1: default language 0x0409 usb 1-3.1.2.1: udev 13, busnum 1, minor = 12 usb 1-3.1.2.1: New USB device found, idVendor=090c, idProduct=1000 usb 1-3.1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.1.2.1: Product: DISK 2.0 usb 1-3.1.2.1: Manufacturer: USB usb 1-3.1.2.1: SerialNumber: PHN84K6AD8PLXSVC PM: Adding info for usb:1-3.1.2.1 usb 1-3.1.2.1: uevent usb 1-3.1.2.1: usb_probe_device usb 1-3.1.2.1: configuration #1 chosen from 1 choice usb 1-3.1.2.1: adding 1-3.1.2.1:1.0 (config #1, interface 0) PM: Adding info for usb:1-3.1.2.1:1.0 usb 1-3.1.2.1:1.0: uevent usb-storage 1-3.1.2.1:1.0: usb_probe_interface usb-storage 1-3.1.2.1:1.0: usb_probe_interface - got id scsi5 : SCSI emulation for USB Mass Storage devices PM: Adding info for scsi:host5 PM: Adding info for No Bus:host5 usb-storage: device found at 13 usb-storage: waiting for device to settle before scanning PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_02 PM: Adding info for No Bus:usbdev1.13 drivers/usb/core/inode.c: creating file '013' PM: Adding info for No Bus:ep_00 usb 1-3.1.2.1: uevent hub 1-3.1.2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s usb 1-3.1.2.1: uevent usb 1-3.1.2.2: new low speed USB device using ehci_hcd and address 14 usb 1-3.1.2.2: skipped 1 descriptor after interface usb 1-3.1.2.2: default language 0x0409 usb 1-3.1.2.2: udev 14, busnum 1, minor = 13 usb 1-3.1.2.2: New USB device found, idVendor=046d, idProduct=c00c usb 1-3.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.1.2.2: Product: USB Optical Mouse usb 1-3.1.2.2: Manufacturer: Logitech PM: Adding info for usb:1-3.1.2.2 usb 1-3.1.2.2: uevent usb 1-3.1.2.2: usb_probe_device usb 1-3.1.2.2: configuration #1 chosen from 1 choice usb 1-3.1.2.2: adding 1-3.1.2.2:1.0 (config #1, interface 0) PM: Adding info for usb:1-3.1.2.2:1.0 usb 1-3.1.2.2:1.0: uevent usbhid 1-3.1.2.2:1.0: usb_probe_interface usbhid 1-3.1.2.2:1.0: usb_probe_interface - got id PM: Adding info for hid:0003:046D:C00C.0006 usb 1-3.1.2.2: uevent PM: Adding info for No Bus:input5 input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0b.1/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2.2/1-3.1.2.2:1.0/input/input5 PM: Adding info for No Bus:mouse3 generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0b.1-3.1.2.2/input0 PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:usbdev1.14 drivers/usb/core/inode.c: creating file '014' PM: Adding info for No Bus:ep_00 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s usb 1-3.1.2.2: uevent hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-3.1.2:1.0: state 7 ports 4 chg 0000 evt 0004 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 PM: Adding info for scsi:target4:0:0 PM: Adding info for scsi:4:0:0:0 PM: Adding info for No Bus:4:0:0:0 PM: Adding info for No Bus:4:0:0:0 scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 PM: Adding info for scsi:4:0:0:1 PM: Adding info for No Bus:4:0:0:1 PM: Adding info for No Bus:4:0:0:1 scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 PM: Adding info for scsi:4:0:0:2 PM: Adding info for No Bus:4:0:0:2 PM: Adding info for No Bus:4:0:0:2 scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 PM: Adding info for scsi:4:0:0:3 PM: Adding info for No Bus:4:0:0:3 PM: Adding info for No Bus:4:0:0:3 usb-storage: device scan complete ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s scsi 5:0:0:0: Direct-Access USB DISK 2.0 0403 PQ: 0 ANSI: 0 CCS PM: Adding info for scsi:target5:0:0 PM: Adding info for scsi:5:0:0:0 PM: Adding info for No Bus:5:0:0:0 PM: Adding info for No Bus:5:0:0:0 usb-storage: device scan complete hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 ehci_hcd 0000:00:0b.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:0b.1: port 1 low speed --> companion ehci_hcd 0000:00:0b.1: GetStatus port 1 status 003402 POWER OWNER sig=k CSC hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030301 PESC CSC LSDA PPS CCS hub 2-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00130300 PRSC PESC CSC LSDA PPS hub 2-0:1.0: unable to enumerate USB device on port 1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002 hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0002 ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [0] = 0x00030300 PESC CSC LSDA PPS hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 ohci_hcd 0000:00:0b.0: auto-stop root hub ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for UDMA/100 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4: limiting SATA link speed to 1.5 Gbps ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for UDMA/100 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: limiting speed to UDMA/66:PIO4 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for UDMA/66 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: limiting speed to UDMA/33:PIO4 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for UDMA/33 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: limiting speed to PIO4 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO4 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: limiting speed to PIO3 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO3 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: limiting speed to PIO0 ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete PM: Adding info for No Bus:0:0:0:0 PM: Adding info for No Bus:1:0:0:0 PM: Adding info for No Bus:4:0:0:0 PM: Adding info for No Bus:4:0:0:1 PM: Adding info for No Bus:4:0:0:2 PM: Adding info for No Bus:4:0:0:3 PM: Adding info for No Bus:5:0:0:0 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA PM: Adding info for No Bus:sda sda: sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA PM: Adding info for No Bus:sdb sdb: PM: Adding info for No Bus:sdc PM: Adding info for No Bus:8:32 PM: Adding info for No Bus:sdd PM: Adding info for No Bus:8:48 sd 4:0:0:0: [sdc] Attached SCSI removable disk PM: Adding info for No Bus:sde PM: Adding info for No Bus:8:64 PM: Adding info for No Bus:sdf PM: Adding info for No Bus:8:80 sd 5:0:0:0: [sdg] 3981312 512-byte logical blocks: (2.03 GB/1.89 GiB) sd 4:0:0:1: [sdd] Attached SCSI removable disk sd 4:0:0:2: [sde] Attached SCSI removable disk sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Mode Sense: 43 00 00 00 sd 5:0:0:0: [sdg] Assuming drive cache: write through PM: Adding info for No Bus:sdg sd 4:0:0:3: [sdf] Attached SCSI removable disk sd 5:0:0:0: [sdg] Assuming drive cache: write through sdg: sda1 sda2 sda3 < sdg1 PM: Adding info for No Bus:sdg1 PM: Adding info for No Bus:8:96 unknown partition table PM: Adding info for No Bus:8:16 sd 1:0:0:0: [sdb] Attached SCSI disk sd 5:0:0:0: [sdg] Assuming drive cache: write through sd 5:0:0:0: [sdg] Attached SCSI removable disk > PM: Adding info for No Bus:sda1 PM: Adding info for No Bus:sda2 PM: Adding info for No Bus:sda3 PM: Adding info for No Bus:8:0 sd 0:0:0:0: [sda] Attached SCSI disk ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete INFO: task modprobe:744 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c1c1ff34 0 744 1 0x00000000 c3c05700 00000082 00000002 c1c1ff34 c3c01f04 00000000 c12b6e12 c1c95880 c10e29d1 c1389f04 c233e300 c233e48c 00000000 fffe32ef 00000000 00000000 00000001 c1cc8c40 c3c01f04 c233e48c c1318bf0 00000000 c1d09180 c1dd0900 Call Trace: [] ? sysfs_find_dirent+0x21/0x30 [] ? sysfs_add_file_mode+0x55/0x90 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:750 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c1c2ff34 0 750 1 0x00000000 c3d05700 00000086 00000002 c1c2ff34 c3d01f04 00000000 c12b6e12 c233f100 c10e29d1 c1389f04 c23a2a00 c23a2b8c 00000001 fffe32ed 00000000 00000000 00000001 c1d25c00 c3d01f04 c23a2b8c c1318bf0 00000000 c1d09000 c1dd00c0 Call Trace: [] ? sysfs_find_dirent+0x21/0x30 [] ? sysfs_add_file_mode+0x55/0x90 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:874 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c3c01f20 0 874 1 0x00000000 c3c05700 00000082 000006e2 c3c01f20 00000002 c1c63f30 c1c63f2c c233ea00 c1c63f64 c1389f04 c1c97480 c1c9760c 00000000 fffb7dfe c3c01f20 00000000 c10e24f5 f703fa40 c3c01f04 c1c9760c 000006e2 00000080 00000000 f8e8c0f4 Call Trace: [] ? sysfs_add_file_mode+0x55/0x90 [] ? storage_probe+0x0/0x80 [usb_storage] [] ? _spin_lock_irqsave+0x19/0x40 [] ? _spin_lock_irqsave+0x19/0x40 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? printk+0x17/0x1b [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:885 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c238df34 0 885 1 0x00000000 c3c05700 00000082 c3c01f04 c238df34 c3c01f04 00000000 c238df5c c1c97480 c238df04 c1389f04 c1c95880 c1c95a0c 00000000 fffe32c6 c3c01f20 00000000 00000000 f703e380 c3c01f04 c1c95a0c 00000000 f8ef9cd4 f8ef6580 c10e2540 Call Trace: [] ? usbhid_probe+0x0/0x360 [usbhid] [] ? sysfs_add_file+0x10/0x20 [] ? _spin_lock_irqsave+0x19/0x40 [] ? _spin_lock_irqsave+0x19/0x40 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? hid_init+0xc6/0xca [usbhid] [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:904 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c3d01f20 0 904 622 0x00000000 c3d05700 00000086 00000832 c3d01f20 00000002 c1c47f30 c1c47f2c c1c96300 f8fe24c4 c1389f04 c233f100 c233f28c 00000001 fffe32c7 c3d01f20 00000000 00000202 c1cc8fc0 c3d01f04 c233f28c 00000832 00000000 c10363f1 f8fecb40 Call Trace: [] ? sysctl_set_parent+0x21/0x40 [] ? _spin_unlock+0xc/0x30 [] ? _spin_lock_irqsave+0x19/0x40 [] ? _spin_lock_irqsave+0x19/0x40 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:905 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c212bf34 0 905 624 0x00000000 c3d05700 00000086 c3d01f04 c212bf34 c3d01f04 00000000 c212bf2c f704dc00 c10e3aed c1389f04 c1c96300 c1c9648c 00000001 fffe32db c3d01f20 00000000 00000202 c1cc81c0 c3d01f04 c1c9648c 00000519 f71dddc0 00000002 c106a750 Call Trace: [] ? sysfs_do_create_link+0x8d/0x120 [] ? mempool_alloc_slab+0x0/0x10 [] ? mempool_free_slab+0x0/0x10 [] ? _spin_lock_irqsave+0x19/0x40 [] ? _spin_lock_irqsave+0x19/0x40 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? init_sd+0x13a/0x17a [sd_mod] [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb PM: Adding info for No Bus:device-mapper device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete INFO: task modprobe:744 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c1c1ff34 0 744 1 0x00000000 c3c05700 00000082 00000002 c1c1ff34 c3c01f04 00000000 c12b6e12 c1c95880 c10e29d1 c1389f04 c233e300 c233e48c 00000000 fffe32ef 00000000 00000000 00000001 c1cc8c40 c3c01f04 c233e48c c1318bf0 00000000 c1d09180 c1dd0900 Call Trace: [] ? sysfs_find_dirent+0x21/0x30 [] ? sysfs_add_file_mode+0x55/0x90 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:750 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c1c2ff34 0 750 1 0x00000000 c3d05700 00000086 00000002 c1c2ff34 c3d01f04 00000000 c12b6e12 c233f100 c10e29d1 c1389f04 c23a2a00 c23a2b8c 00000001 fffe32ed 00000000 00000000 00000001 c1d25c00 c3d01f04 c23a2b8c c1318bf0 00000000 c1d09000 c1dd00c0 Call Trace: [] ? sysfs_find_dirent+0x21/0x30 [] ? sysfs_add_file_mode+0x55/0x90 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:874 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c3c01f20 0 874 1 0x00000000 c3c05700 00000082 000006e2 c3c01f20 00000002 c1c63f30 c1c63f2c c233ea00 c1c63f64 c1389f04 c1c97480 c1c9760c 00000000 fffb7dfe c3c01f20 00000000 c10e24f5 f703fa40 c3c01f04 c1c9760c 000006e2 00000080 00000000 f8e8c0f4 Call Trace: [] ? sysfs_add_file_mode+0x55/0x90 [] ? storage_probe+0x0/0x80 [usb_storage] [] ? _spin_lock_irqsave+0x19/0x40 [] ? _spin_lock_irqsave+0x19/0x40 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? printk+0x17/0x1b [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb INFO: task modprobe:885 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D c238df34 0 885 1 0x00000000 c3c05700 00000082 c3c01f04 c238df34 c3c01f04 00000000 c238df5c c1c97480 c238df04 c1389f04 c1c95880 c1c95a0c 00000000 fffe32c6 c3c01f20 00000000 00000000 f703e380 c3c01f04 c1c95a0c 00000000 f8ef9cd4 f8ef6580 c10e2540 Call Trace: [] ? usbhid_probe+0x0/0x360 [usbhid] [] ? sysfs_add_file+0x10/0x20 [] ? _spin_lock_irqsave+0x19/0x40 [] ? _spin_lock_irqsave+0x19/0x40 [] ? async_synchronize_cookie_domain+0xbd/0x150 [] ? hid_init+0xc6/0xca [usbhid] [] ? autoremove_wake_function+0x0/0x50 [] ? async_synchronize_full+0x10/0x30 [] ? sys_init_module+0xfc/0x220 [] ? syscall_call+0x7/0xb ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: WARNING: synchronous SCSI scan failed without making any progress, switching to async md: raid0 personality registered for level 0 ata4: EH complete ide-cd driver 5.00 PM: Adding info for No Bus:0.0 ide-cd: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Uniform CD-ROM driver Revision: 3.20 usb 1-3.1.2.1:1.0: uevent usb 1-3.1.2.1: uevent md: raid1 personality registered for level 1 usb 1-3.1.2.1:1.0: uevent xor: automatically using best checksumming function: pIII_sse pIII_sse : 7516.000 MB/sec xor: using function: pIII_sse (7516.000 MB/sec) PM: Adding info for No Bus:hda PM: Adding info for No Bus:3:0 raid6: int32x1 875 MB/s usb 1-3.1.2.1:1.0: uevent usb 1-3.1.2.1: uevent usb 1-3.1.2.1:1.0: uevent raid6: int32x2 843 MB/s raid6: int32x4 703 MB/s raid6: int32x8 585 MB/s raid6: mmxx1 2742 MB/s PM: Adding info for No Bus:dm-0 PM: Adding info for No Bus:253:0 raid6: mmxx2 3156 MB/s raid6: sse1x1 1886 MB/s raid6: sse1x2 2437 MB/s PM: Adding info for No Bus:dm-1 PM: Adding info for No Bus:253:1 PM: Adding info for No Bus:dm-2 raid6: sse2x1 3531 MB/s PM: Adding info for No Bus:253:2 PM: Adding info for No Bus:dm-3 PM: Adding info for No Bus:253:3 PM: Adding info for No Bus:dm-4 PM: Adding info for No Bus:253:4 PM: Adding info for No Bus:dm-5 PM: Adding info for No Bus:253:5 PM: Adding info for No Bus:dm-6 PM: Adding info for No Bus:253:6 raid6: sse2x2 4164 MB/s raid6: using algorithm sse2x2 (4164 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 PM: Removing info for No Bus:253:1 PM: Removing info for No Bus:dm-1 md: raid10 personality registered for level 10 PM: Marking nosave pages: 000000000009c000 - 0000000000100000 PM: Basic memory bitmaps created PM: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. udev: starting version 146 usb usb2: uevent usb 2-0:1.0: uevent usb usb1: uevent usb 1-0:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-3: uevent usb 1-3.1: uevent usb 1-3.1.1: uevent usb 1-3.1.1:1.0: uevent usb 1-3.1.1:1.1: uevent usb 1-3.1.2: uevent usb 1-3.1.2.1: uevent usb 1-3.1.2.1:1.0: uevent usb 1-3.1.2.2: uevent usb 1-3.1.2.2:1.0: uevent usb 1-3.1.2:1.0: uevent usb 1-3.1:1.0: uevent usb 1-3:1.0: uevent usb 1-6: uevent usb 1-6.1: uevent usb 1-6.1:1.0: uevent usb 1-6.3: uevent usb 1-6.3.3: uevent usb 1-6.3.3:1.0: uevent usb 1-6.3.3:1.1: uevent usb 1-6.3:1.0: uevent usb 1-6:1.0: uevent usb usb2: uevent usb usb1: uevent usb usb2: uevent usb usb1: uevent usb 1-2: uevent usb 1-6: uevent usb 1-3: uevent usb 1-3: uevent usb 1-6: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent usb 1-2:1.0: uevent usb 1-6.1: uevent usb 1-6.3: uevent usb 1-6.1: uevent usb 1-3.1: uevent usb 1-6.3: uevent usb 1-3.1: uevent PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12b usb 1-3.1.2: uevent usb 1-6.3.3: uevent usb 1-3.1.2: uevent usb 1-6.3.3: uevent usb 1-3.1.1: uevent usb 1-3.1.2.1: uevent usb 1-3.1.2.1: uevent usb 1-3.1.1: uevent usb 1-3.1.2.1:1.0: uevent usb 1-3.1.2.1: uevent PM: Adding info for No Bus:input6 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 ACPI: Power Button [PWRB] PM: Adding info for No Bus:input7 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 ACPI: Power Button [PWRF] usb 1-3.1.2.2: uevent usb 1-3.1.2.1:1.0: uevent usb 1-3.1.2.2: uevent ACPI: SSDT 7fefa940 00175 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) PM: Adding info for No Bus:cooling_device1 processor LNXCPU:00: registered as cooling_device1 ACPI: SSDT 7fefad50 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) PM: Adding info for No Bus:cooling_device2 processor LNXCPU:01: registered as cooling_device2 PM: Adding info for No Bus:event0 PM: Adding info for No Bus:event1 PM: Adding info for No Bus:event2 PM: Adding info for No Bus:event3 PM: Adding info for No Bus:event4 PM: Adding info for No Bus:event5 PM: Adding info for No Bus:event6 PM: Adding info for No Bus:event7 usb 1-6.1:1.0: uevent usb 1-6.1: uevent usb 1-6.1:1.0: uevent usb 1-6.1:1.0: uevent usb 1-6.1: uevent usb 1-6.1:1.0: uevent PM: Adding info for No Bus:raw1394 ieee1394: raw1394: /dev/raw1394 device initialized usb 1-6.3.3:1.0: uevent usb 1-6.3.3:1.1: uevent usb 1-6.3.3: uevent usb 1-6.3.3: uevent usb 1-6.3.3:1.1: uevent usb 1-6.3.3: uevent usb 1-6.3.3:1.0: uevent usb 1-6.3.3:1.1: uevent usb 1-6.3.3:1.1: uevent PM: Adding info for No Bus:hwmon0 usb 1-3.1.2.2:1.0: uevent usb 1-3.1.2.2: uevent usb 1-3.1.2.2:1.0: uevent usb 1-3.1.1:1.0: uevent usb 1-3.1.1: uevent usb 1-3.1.2.2:1.0: uevent usb 1-3.1.1:1.1: uevent usb 1-3.1.2.2: uevent usb 1-3.1.1: uevent usb 1-3.1.1:1.1: uevent usb 1-3.1.1: uevent usb 1-3.1.1:1.1: uevent usb 1-3.1.2.2:1.0: uevent usb 1-3.1.1:1.1: uevent usb 1-3.1.1:1.0: uevent ACPI: I/O resource nForce2_smbus [0x5000-0x503f] conflicts with ACPI region SM00 [0x5000-0x5005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver nForce2_smbus 0000:00:0a.1: Error probing SMB1. PM: Adding info for i2c:i2c-0 i2c i2c-0: nForce2 SMBus adapter at 0x5100 PM: Adding info for No Bus:dv1394-0 PM: Adding info for No Bus:timer hda: UDMA/66 mode selected hda: task_no_data_intr: status=0x41 { DriveReady Error } hda: task_no_data_intr: error=0x04 { AbortedCommand } hda: possibly failed opcode: 0xe3 PM: Adding info for No Bus:seq PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 HDA Intel 0000:00:10.1: setting latency timer to 64 PM: Adding info for No Bus:input8 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input8 PM: Adding info for No Bus:event8 PM: Adding info for No Bus:card0 PM: Adding info for No Bus:pcmC0D1p PM: Adding info for No Bus:adsp PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for No Bus:dsp PM: Adding info for No Bus:audio PM: Adding info for No Bus:hwC0D0 PM: Adding info for No Bus:controlC0 PM: Adding info for No Bus:mixer PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 hda: UDMA/66 mode selected hda: task_no_data_intr: status=0x41 { DriveReady Error } hda: task_no_data_intr: error=0x04 { AbortedCommand } hda: possibly failed opcode: 0xe3 EXT3 FS on dm-2, internal journal i2c /dev entries driver PM: Adding info for No Bus:i2c-0 it87: Found IT8712F chip at 0x290, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver fuse init (API version 7.13) PM: Adding info for No Bus:fuse kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with writeback data mode. PM: Adding info for No Bus:253:3-fuseblk PM: Adding info for No Bus:253:6-fuseblk Adding 4194296k swap on /mnt/oldlin/4G-memory.swap. Priority:-1 extents:1057 across:4264956k r8169: eth1: link up NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PM: Adding info for No Bus:0:16 PM: Adding info for No Bus:0:17 PM: Adding info for No Bus:0:18 ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete ata4: drained 18 bytes to clear DRQ. ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen scsi 3:0:0:0: CDB: Inquiry: 12 00 00 00 24 00 ata4.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link ata4: nv: skipping hardreset on occupied port ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: configured for PIO0 ata4: EH complete