| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 3 Mar 2010 19:57:28 -0800
From: John Stultz <johnstul@...ibm.com>
To: " lkml" <linux-kernel@...r.kernel.org>
Cc: John Stultz <johnstul@...ibm.com>,
Mikael Starvik <starvik@...s.com>,
Jesper Nilsson <jesper.nilsson@...s.com>,
Thomas Gleixner <tglx@...utronix.de>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: [PATCH 13/14] cris: Convert cris to use read/update_persistent_clock
This patch converts the cris architecture to use the generic read_persistent_clock and update_persistent_clock interfaces, reducing the amount of arch specific code we have to maintain, and allowing for further cleanups in the future.
I have not built or tested this patch, so help from arch maintainers would be appreciated.
Cc: Mikael Starvik <starvik@...s.com>
Cc: Jesper Nilsson <jesper.nilsson@...s.com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Andrew Morton <akpm@...ux-foundation.org>
Signed-off-by: John Stultz <johnstul@...ibm.com>
---
arch/cris/Kconfig | 3 ++
arch/cris/arch-v10/kernel/time.c | 37 +---------------------------------
arch/cris/arch-v32/kernel/time.c | 40 +------------------------------------
arch/cris/kernel/time.c | 20 ++++++++++--------
4 files changed, 18 insertions(+), 82 deletions(-)
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 7adac38..4d42d9d 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -20,6 +20,9 @@ config RWSEM_GENERIC_SPINLOCK
config RWSEM_XCHGADD_ALGORITHM
bool
+config GENERIC_CMOS_UPDATE
+ def_bool y
+
config GENERIC_IOMAP
bool
default y
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 31ca141..30adae5 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -26,7 +26,6 @@
/* it will make jiffies at 96 hz instead of 100 hz though */
#undef USE_CASCADE_TIMERS
-extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
extern int have_rtc;
@@ -188,8 +187,6 @@ stop_watchdog(void)
#endif
}
-/* last time the cmos clock got updated */
-static long last_rtc_update = 0;
/*
* timer_interrupt() needs to keep up the real-time clock,
@@ -232,24 +229,6 @@ timer_interrupt(int irq, void *dev_id)
do_timer(1);
cris_do_profile(regs); /* Save profiling information */
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- *
- * The division here is not time critical since it will run once in
- * 11 minutes
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
- if (set_rtc_mmss(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
- }
return IRQ_HANDLED;
}
@@ -274,22 +253,10 @@ time_init(void)
*/
loops_per_usec = 50;
- if(RTC_INIT() < 0) {
- /* no RTC, start at 1980 */
- xtime.tv_sec = 0;
- xtime.tv_nsec = 0;
+ if(RTC_INIT() < 0)
have_rtc = 0;
- } else {
- /* get the current time */
+ else
have_rtc = 1;
- update_xtime_from_cmos();
- }
-
- /*
- * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
- * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
- */
- set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
/* Setup the etrax timers
* Base frequency is 25000 hz, divider 250 -> 100 HZ
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index b1920d8..1ee0e10 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -44,7 +44,6 @@ unsigned long timer_regs[NR_CPUS] =
#endif
};
-extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
extern int have_rtc;
@@ -198,9 +197,6 @@ handle_watchdog_bite(struct pt_regs* regs)
#endif
}
-/* Last time the cmos clock got updated. */
-static long last_rtc_update = 0;
-
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick.
@@ -238,25 +234,6 @@ timer_interrupt(int irq, void *dev_id)
/* Call the real timer interrupt handler */
do_timer(1);
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- *
- * The division here is not time critical since it will run once in
- * 11 minutes
- */
- if ((time_status & STA_UNSYNC) == 0 &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
- if (set_rtc_mmss(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- /* Do it again in 60 s */
- last_rtc_update = xtime.tv_sec - 600;
- }
return IRQ_HANDLED;
}
@@ -309,23 +286,10 @@ time_init(void)
*/
loops_per_usec = 50;
- if(RTC_INIT() < 0) {
- /* No RTC, start at 1980 */
- xtime.tv_sec = 0;
- xtime.tv_nsec = 0;
+ if(RTC_INIT() < 0)
have_rtc = 0;
- } else {
- /* Get the current time */
+ else
have_rtc = 1;
- update_xtime_from_cmos();
- }
-
- /*
- * Initialize wall_to_monotonic such that adding it to
- * xtime will yield zero, the tv_nsec field must be normalized
- * (i.e., 0 <= nsec < NSEC_PER_SEC).
- */
- set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
/* Start CPU local timer. */
cris_timer_init();
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index 074fe7d..e169aea 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -162,6 +162,8 @@ unsigned long
get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
+ if(!have_rtc)
+ return 0;
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
@@ -183,19 +185,19 @@ get_cmos_time(void)
return mktime(year, mon, day, hour, min, sec);
}
-/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
- * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
- */
-void
-update_xtime_from_cmos(void)
+int update_persistent_clock(struct timespec now)
{
- if(have_rtc) {
- xtime.tv_sec = get_cmos_time();
- xtime.tv_nsec = 0;
- }
+ return set_rtc_mmss(now.tv_sec);
}
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = get_cmos_time();
+ ts->tv_nsec = 0;
+}
+
+
extern void cris_profile_sample(struct pt_regs* regs);
void
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists