| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 19 May 2010 13:49:27 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata updates for 2.6.35
Notable changes:
* ahci: "libahci" split out of ahci driver, because several knockoffs have
emerged that require a fair amount of vendor-specific code
* ahci: uses less power
* ahci: improved enclosure management interface
* PIO command submission uses fewer PIO cycles
* cleanups improving separation between SFF (original IDE interface)
and BMDMA (PCI IDE DMA). NOTE: A few more patches coming down the
pipe, to finish this off.
* other random minor bits
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
Documentation/DocBook/libata.tmpl | 18 +-
drivers/ata/Kconfig | 20 +-
drivers/ata/Makefile | 3 +-
drivers/ata/ahci.c | 2544 +++--------------------------------
drivers/ata/ahci.h | 343 +++++
drivers/ata/ahci_platform.c | 192 +++
drivers/ata/libahci.c | 2216 ++++++++++++++++++++++++++++++
drivers/ata/libata-core.c | 216 +---
drivers/ata/libata-eh.c | 6 +-
drivers/ata/libata-pmp.c | 32 +-
drivers/ata/libata-scsi.c | 3 -
drivers/ata/libata-sff.c | 1387 ++++++++++---------
drivers/ata/libata.h | 29 +-
drivers/ata/pata_acpi.c | 8 +-
drivers/ata/pata_ali.c | 2 +-
drivers/ata/pata_at91.c | 1 -
drivers/ata/pata_atiixp.c | 2 +-
drivers/ata/pata_bf54x.c | 87 +-
drivers/ata/pata_cmd640.c | 13 +-
drivers/ata/pata_cs5520.c | 2 +-
drivers/ata/pata_cs5530.c | 4 +-
drivers/ata/pata_hpt366.c | 2 +-
drivers/ata/pata_hpt37x.c | 4 +-
drivers/ata/pata_hpt3x2n.c | 2 +-
drivers/ata/pata_icside.c | 5 +-
drivers/ata/pata_it821x.c | 6 +-
drivers/ata/pata_macio.c | 5 +-
drivers/ata/pata_mpc52xx.c | 78 +-
drivers/ata/pata_ns87415.c | 2 +-
drivers/ata/pata_octeon_cf.c | 12 +-
drivers/ata/pata_oldpiix.c | 2 +-
drivers/ata/pata_pcmcia.c | 2 +-
drivers/ata/pata_pdc2027x.c | 4 +-
drivers/ata/pata_pdc202xx_old.c | 2 +-
drivers/ata/pata_platform.c | 1 -
drivers/ata/pata_radisys.c | 2 +-
drivers/ata/pata_sc1200.c | 4 +-
drivers/ata/pata_scc.c | 80 +-
drivers/ata/pata_sch.c | 12 +-
drivers/ata/pata_serverworks.c | 6 +-
drivers/ata/pata_sil680.c | 30 +-
drivers/ata/pata_via.c | 6 +-
drivers/ata/pdc_adma.c | 74 +-
drivers/ata/sata_inic162x.c | 25 +-
drivers/ata/sata_mv.c | 47 +-
drivers/ata/sata_nv.c | 265 ++--
drivers/ata/sata_promise.c | 32 +-
drivers/ata/sata_qstor.c | 90 +-
drivers/ata/sata_sil.c | 9 +-
drivers/ata/sata_sil24.c | 9 +-
drivers/ata/sata_svw.c | 2 +-
drivers/ata/sata_sx4.c | 10 +-
drivers/ata/sata_uli.c | 4 +-
drivers/ata/sata_vsc.c | 10 +-
drivers/scsi/ipr.c | 6 +-
drivers/scsi/libsas/sas_scsi_host.c | 2 +-
include/linux/ahci_platform.h | 29 +
include/linux/ata.h | 2 +-
include/linux/libata.h | 80 +-
59 files changed, 4212 insertions(+), 3879 deletions(-)
create mode 100644 drivers/ata/ahci.h
create mode 100644 drivers/ata/ahci_platform.c
create mode 100644 drivers/ata/libahci.c
create mode 100644 include/linux/ahci_platform.h
Akinobu Mita (1):
libata: use __ratelimit
Alan Cox (2):
libata: Remove excess delay in the tf_load path
pata_sil680: Do our own exec_command posting
Anton Vorontsov (10):
ahci: Get rid of host->iomap usage
ahci: Factor out PCI specifics from ahci_save_initial_config()
ahci: Get rid of pci_dev argument in ahci_save_initial_config()
ahci: Factor out PCI specifics from ahci_reset_controller()
ahci: Get rid of pci_dev argument in ahci_port_init()
ahci: Factor out PCI specifics from ahci_init_controller()
ahci: Factor out PCI specifics from ahci_print_info()
ahci: Introduce ahci_set_em_messages()
ahci: Move generic code into libahci
ahci: Add platform driver
Grant Grundler (1):
[libata] Disable R_OK (Early ACK) on SII 3726 PMP
Harry Zhang (2):
ahci: EM message type auto detect
ahci: add "em_buffer" attribute for AHCI hosts
Jeff Garzik (1):
ahci_platform: properly set up EM messaging
Matthew Garrett (1):
ahci: Turn off DMA engines when there's no device attached
Roman Fietze (1):
pata_mpc52xx: reduce code size by simple change of constant data types
Sebastian Andrzej Siewior (1):
libata: don't flush dcache on slab pages
Sergei Shtylyov (6):
libata-sff: kill unused ata_bus_reset()
pata_scc: make scc_wait_after_reset() static
pata_scc: kill useless check in scc_postreset()
libata: introduce sff_set_devctl() method
libata: make sff_irq_on() method optional
pata_cmd640: don't read CFR pointlessly
Tejun Heo (23):
ahci: clean up board IDs
ahci: implement AHCI_HFLAG_NO_FPDMA_AA and update NV quirks
libata: update gfp/slab.h includes
libata: use longer 0xff wait if parallel scan is enabled
sata_nv: use ata_pci_sff_activate_host() instead of ata_host_activate()
pata_sch: use ata_pci_sff_init_one()
sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF
sata_mv: remove unnecessary initialization
libata-sff: update bmdma host bus error handling
libata-sff: kill unused prototype and make ata_dev_select() static
libata: kill ATA_FLAG_DISABLED
sata_inic162x: kill PORT_PRD_ADDR initialization
libata-sff: reorder SFF/BMDMA functions
libata-sff: clean up inheritance in several drivers
libata-sff: clean up BMDMA initialization
libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()
libata-sff: rename ap->ops->drain_fifo() to sff_drain_fifo()
libata-sff: ap->[last_]ctl are SFF specific
libata-sff: port_task is SFF specific
libata-sff: separate out BMDMA EH
libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
libata-sff: prd is BMDMA specific
libata-sff: separate out BMDMA qc_issue
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index ff3e5be..828748c 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -81,16 +81,14 @@ void (*port_disable) (struct ata_port *);
</programlisting>
<para>
- Called from ata_bus_probe() and ata_bus_reset() error paths,
- as well as when unregistering from the SCSI module (rmmod, hot
- unplug).
+ Called from ata_bus_probe() error path, as well as when
+ unregistering from the SCSI module (rmmod, hot unplug).
This function should do whatever needs to be done to take the
port out of use. In most cases, ata_port_disable() can be used
as this hook.
</para>
<para>
Called from ata_bus_probe() on a failed probe.
- Called from ata_bus_reset() on a failed bus reset.
Called from ata_scsi_release().
</para>
@@ -227,6 +225,18 @@ u8 (*sff_check_altstatus)(struct ata_port *ap);
</sect2>
+ <sect2><title>Write specific ATA shadow register</title>
+ <programlisting>
+void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
+ </programlisting>
+
+ <para>
+ Write the device control ATA shadow register to the hardware.
+ Most drivers don't need to define this.
+ </para>
+
+ </sect2>
+
<sect2><title>Select ATA device on bus</title>
<programlisting>
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 01c52c4..e68541f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -65,6 +65,14 @@ config SATA_AHCI
If unsure, say N.
+config SATA_AHCI_PLATFORM
+ tristate "Platform AHCI SATA support"
+ help
+ This option enables support for Platform AHCI Serial ATA
+ controllers.
+
+ If unsure, say N.
+
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
@@ -73,6 +81,12 @@ config SATA_SIL24
If unsure, say N.
+config SATA_INIC162X
+ tristate "Initio 162x SATA support"
+ depends on PCI
+ help
+ This option enables support for Initio 162x Serial ATA.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
@@ -213,12 +227,6 @@ config SATA_VITESSE
If unsure, say N.
-config SATA_INIC162X
- tristate "Initio 162x SATA support"
- depends on PCI
- help
- This option enables support for Initio 162x Serial ATA.
-
config PATA_ACPI
tristate "ACPI firmware driver for PATA"
depends on ATA_ACPI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index fc936d4..d0a93c4 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,7 +1,8 @@
obj-$(CONFIG_ATA) += libata.o
-obj-$(CONFIG_SATA_AHCI) += ahci.o
+obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5326af2..8ca16f5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -46,403 +46,48 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
+#include "ahci.h"
#define DRV_NAME "ahci"
#define DRV_VERSION "3.0"
-/* Enclosure Management Control */
-#define EM_CTRL_MSG_TYPE 0x000f0000
-
-/* Enclosure Management LED Message Type */
-#define EM_MSG_LED_HBA_PORT 0x0000000f
-#define EM_MSG_LED_PMP_SLOT 0x0000ff00
-#define EM_MSG_LED_VALUE 0xffff0000
-#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
-#define EM_MSG_LED_VALUE_OFF 0xfff80000
-#define EM_MSG_LED_VALUE_ON 0x00010000
-
-static int ahci_skip_host_reset;
-static int ahci_ignore_sss;
-
-module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
-MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
-
-module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
-MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
-
-static int ahci_enable_alpm(struct ata_port *ap,
- enum link_pm policy);
-static void ahci_disable_alpm(struct ata_port *ap);
-static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
-static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
- size_t size);
-static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
- ssize_t size);
-
enum {
AHCI_PCI_BAR = 5,
- AHCI_MAX_PORTS = 32,
- AHCI_MAX_SG = 168, /* hardware max is 64K */
- AHCI_DMA_BOUNDARY = 0xffffffff,
- AHCI_MAX_CMDS = 32,
- AHCI_CMD_SZ = 32,
- AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
- AHCI_RX_FIS_SZ = 256,
- AHCI_CMD_TBL_CDB = 0x40,
- AHCI_CMD_TBL_HDR_SZ = 0x80,
- AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
- AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
- AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
- AHCI_RX_FIS_SZ,
- AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ +
- AHCI_CMD_TBL_AR_SZ +
- (AHCI_RX_FIS_SZ * 16),
- AHCI_IRQ_ON_SG = (1 << 31),
- AHCI_CMD_ATAPI = (1 << 5),
- AHCI_CMD_WRITE = (1 << 6),
- AHCI_CMD_PREFETCH = (1 << 7),
- AHCI_CMD_RESET = (1 << 8),
- AHCI_CMD_CLR_BUSY = (1 << 10),
-
- RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
- RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
- RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
-
- board_ahci = 0,
- board_ahci_vt8251 = 1,
- board_ahci_ign_iferr = 2,
- board_ahci_sb600 = 3,
- board_ahci_mv = 4,
- board_ahci_sb700 = 5, /* for SB700 and SB800 */
- board_ahci_mcp65 = 6,
- board_ahci_nopmp = 7,
- board_ahci_yesncq = 8,
- board_ahci_nosntf = 9,
-
- /* global controller registers */
- HOST_CAP = 0x00, /* host capabilities */
- HOST_CTL = 0x04, /* global host control */
- HOST_IRQ_STAT = 0x08, /* interrupt status */
- HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
- HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
- HOST_EM_LOC = 0x1c, /* Enclosure Management location */
- HOST_EM_CTL = 0x20, /* Enclosure Management Control */
- HOST_CAP2 = 0x24, /* host capabilities, extended */
-
- /* HOST_CTL bits */
- HOST_RESET = (1 << 0), /* reset controller; self-clear */
- HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
- HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
-
- /* HOST_CAP bits */
- HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
- HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
- HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
- HOST_CAP_PART = (1 << 13), /* Partial state capable */
- HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
- HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
- HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
- HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
- HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
- HOST_CAP_CLO = (1 << 24), /* Command List Override support */
- HOST_CAP_LED = (1 << 25), /* Supports activity LED */
- HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
- HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
- HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
- HOST_CAP_SNTF = (1 << 29), /* SNotification register */
- HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
- HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
-
- /* HOST_CAP2 bits */
- HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
- HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
- HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
-
- /* registers for each SATA port */
- PORT_LST_ADDR = 0x00, /* command list DMA addr */
- PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
- PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
- PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
- PORT_IRQ_STAT = 0x10, /* interrupt status */
- PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
- PORT_CMD = 0x18, /* port command */
- PORT_TFDATA = 0x20, /* taskfile data */
- PORT_SIG = 0x24, /* device TF signature */
- PORT_CMD_ISSUE = 0x38, /* command issue */
- PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
- PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
- PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
- PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
- PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
- PORT_FBS = 0x40, /* FIS-based Switching */
-
- /* PORT_IRQ_{STAT,MASK} bits */
- PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
- PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
- PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
- PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
- PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
- PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
- PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
- PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
-
- PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
- PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
- PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
- PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
- PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
- PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
- PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
- PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
- PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
-
- PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
- PORT_IRQ_IF_ERR |
- PORT_IRQ_CONNECT |
- PORT_IRQ_PHYRDY |
- PORT_IRQ_UNK_FIS |
- PORT_IRQ_BAD_PMP,
- PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
- PORT_IRQ_TF_ERR |
- PORT_IRQ_HBUS_DATA_ERR,
- DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
- PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
- PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-
- /* PORT_CMD bits */
- PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
- PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
- PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
- PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */
- PORT_CMD_PMP = (1 << 17), /* PMP attached */
- PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
- PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
- PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
- PORT_CMD_CLO = (1 << 3), /* Command list override */
- PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
- PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
- PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
-
- PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
- PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
- PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
- PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
-
- PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
- PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
- PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */
- PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */
- PORT_FBS_SDE = (1 << 2), /* FBS single device error */
- PORT_FBS_DEC = (1 << 1), /* FBS device error clear */
- PORT_FBS_EN = (1 << 0), /* Enable FBS */
-
- /* hpriv->flags bits */
- AHCI_HFLAG_NO_NCQ = (1 << 0),
- AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
- AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
- AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
- AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
- AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
- AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
- AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
- AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
- AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
- AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
- AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
- link offline */
- AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
-
- /* ap->flags bits */
-
- AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
- ATA_FLAG_IPM,
-
- ICH_MAP = 0x90, /* ICH MAP register */
-
- /* em constants */
- EM_MAX_SLOTS = 8,
- EM_MAX_RETRY = 5,
-
- /* em_ctl bits */
- EM_CTL_RST = (1 << 9), /* Reset */
- EM_CTL_TM = (1 << 8), /* Transmit Message */
- EM_CTL_ALHD = (1 << 26), /* Activity LED */
-};
-
-struct ahci_cmd_hdr {
- __le32 opts;
- __le32 status;
- __le32 tbl_addr;
- __le32 tbl_addr_hi;
- __le32 reserved[4];
-};
-
-struct ahci_sg {
- __le32 addr;
- __le32 addr_hi;
- __le32 reserved;
- __le32 flags_size;
-};
-
-struct ahci_em_priv {
- enum sw_activity blink_policy;
- struct timer_list timer;
- unsigned long saved_activity;
- unsigned long activity;
- unsigned long led_state;
-};
-
-struct ahci_host_priv {
- unsigned int flags; /* AHCI_HFLAG_* */
- u32 cap; /* cap to use */
- u32 cap2; /* cap2 to use */
- u32 port_map; /* port map to use */
- u32 saved_cap; /* saved initial cap */
- u32 saved_cap2; /* saved initial cap2 */
- u32 saved_port_map; /* saved initial port_map */
- u32 em_loc; /* enclosure management location */
};
-struct ahci_port_priv {
- struct ata_link *active_link;
- struct ahci_cmd_hdr *cmd_slot;
- dma_addr_t cmd_slot_dma;
- void *cmd_tbl;
- dma_addr_t cmd_tbl_dma;
- void *rx_fis;
- dma_addr_t rx_fis_dma;
- /* for NCQ spurious interrupt analysis */
- unsigned int ncq_saw_d2h:1;
- unsigned int ncq_saw_dmas:1;
- unsigned int ncq_saw_sdb:1;
- u32 intr_mask; /* interrupts to enable */
- bool fbs_supported; /* set iff FBS is supported */
- bool fbs_enabled; /* set iff FBS is enabled */
- int fbs_last_dev; /* save FBS.DEV of last FIS */
- /* enclosure management info per PM slot */
- struct ahci_em_priv em_priv[EM_MAX_SLOTS];
+enum board_ids {
+ /* board IDs by feature in alphabetical order */
+ board_ahci,
+ board_ahci_ign_iferr,
+ board_ahci_nosntf,
+
+ /* board IDs for specific chipsets in alphabetical order */
+ board_ahci_mcp65,
+ board_ahci_mcp77,
+ board_ahci_mcp89,
+ board_ahci_mv,
+ board_ahci_sb600,
+ board_ahci_sb700, /* for SB700 and SB800 */
+ board_ahci_vt8251,
+
+ /* aliases */
+ board_ahci_mcp_linux = board_ahci_mcp65,
+ board_ahci_mcp67 = board_ahci_mcp65,
+ board_ahci_mcp73 = board_ahci_mcp65,
+ board_ahci_mcp79 = board_ahci_mcp77,
};
-static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
-static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
-static int ahci_port_start(struct ata_port *ap);
-static void ahci_port_stop(struct ata_port *ap);
-static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
-static void ahci_qc_prep(struct ata_queued_cmd *qc);
-static void ahci_freeze(struct ata_port *ap);
-static void ahci_thaw(struct ata_port *ap);
-static void ahci_enable_fbs(struct ata_port *ap);
-static void ahci_disable_fbs(struct ata_port *ap);
-static void ahci_pmp_attach(struct ata_port *ap);
-static void ahci_pmp_detach(struct ata_port *ap);
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-static int ahci_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
-static void ahci_postreset(struct ata_link *link, unsigned int *class);
-static void ahci_error_handler(struct ata_port *ap);
-static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
-static int ahci_port_resume(struct ata_port *ap);
-static void ahci_dev_config(struct ata_device *dev);
-static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
- u32 opts);
#ifdef CONFIG_PM
-static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
-static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
-static ssize_t ahci_activity_store(struct ata_device *dev,
- enum sw_activity val);
-static void ahci_init_sw_activity(struct ata_link *link);
-
-static ssize_t ahci_show_host_caps(struct device *dev,
- struct device_attribute *attr, char *buf);
-static ssize_t ahci_show_host_cap2(struct device *dev,
- struct device_attribute *attr, char *buf);
-static ssize_t ahci_show_host_version(struct device *dev,
- struct device_attribute *attr, char *buf);
-static ssize_t ahci_show_port_cmd(struct device *dev,
- struct device_attribute *attr, char *buf);
-
-static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
-static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
-static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
-static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
-
-static struct device_attribute *ahci_shost_attrs[] = {
- &dev_attr_link_power_management_policy,
- &dev_attr_em_message_type,
- &dev_attr_em_message,
- &dev_attr_ahci_host_caps,
- &dev_attr_ahci_host_cap2,
- &dev_attr_ahci_host_version,
- &dev_attr_ahci_port_cmd,
- NULL
-};
-
-static struct device_attribute *ahci_sdev_attrs[] = {
- &dev_attr_sw_activity,
- &dev_attr_unload_heads,
- NULL
-};
-
-static struct scsi_host_template ahci_sht = {
- ATA_NCQ_SHT(DRV_NAME),
- .can_queue = AHCI_MAX_CMDS - 1,
- .sg_tablesize = AHCI_MAX_SG,
- .dma_boundary = AHCI_DMA_BOUNDARY,
- .shost_attrs = ahci_shost_attrs,
- .sdev_attrs = ahci_sdev_attrs,
-};
-
-static struct ata_port_operations ahci_ops = {
- .inherits = &sata_pmp_port_ops,
-
- .qc_defer = ahci_pmp_qc_defer,
- .qc_prep = ahci_qc_prep,
- .qc_issue = ahci_qc_issue,
- .qc_fill_rtf = ahci_qc_fill_rtf,
-
- .freeze = ahci_freeze,
- .thaw = ahci_thaw,
- .softreset = ahci_softreset,
- .hardreset = ahci_hardreset,
- .postreset = ahci_postreset,
- .pmp_softreset = ahci_softreset,
- .error_handler = ahci_error_handler,
- .post_internal_cmd = ahci_post_internal_cmd,
- .dev_config = ahci_dev_config,
-
- .scr_read = ahci_scr_read,
- .scr_write = ahci_scr_write,
- .pmp_attach = ahci_pmp_attach,
- .pmp_detach = ahci_pmp_detach,
-
- .enable_pm = ahci_enable_alpm,
- .disable_pm = ahci_disable_alpm,
- .em_show = ahci_led_show,
- .em_store = ahci_led_store,
- .sw_activity_show = ahci_activity_show,
- .sw_activity_store = ahci_activity_store,
-#ifdef CONFIG_PM
- .port_suspend = ahci_port_suspend,
- .port_resume = ahci_port_resume,
-#endif
- .port_start = ahci_port_start,
- .port_stop = ahci_port_stop,
-};
static struct ata_port_operations ahci_vt8251_ops = {
.inherits = &ahci_ops,
@@ -463,6 +108,7 @@ static struct ata_port_operations ahci_sb600_ops = {
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
static const struct ata_port_info ahci_port_info[] = {
+ /* by features */
[board_ahci] =
{
.flags = AHCI_FLAG_COMMON,
@@ -470,81 +116,83 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
- [board_ahci_vt8251] =
+ [board_ahci_ign_iferr] =
{
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_vt8251_ops,
+ .port_ops = &ahci_ops,
},
- [board_ahci_ign_iferr] =
+ [board_ahci_nosntf] =
{
- AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
+ AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
- [board_ahci_sb600] =
+ /* by chipsets */
+ [board_ahci_mcp65] =
{
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
- AHCI_HFLAG_32BIT_ONLY),
+ AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
+ AHCI_HFLAG_YES_NCQ),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_sb600_ops,
+ .port_ops = &ahci_ops,
},
- [board_ahci_mv] =
+ [board_ahci_mcp77] =
{
- AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+ AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP),
+ .flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
- [board_ahci_sb700] = /* for SB700 and SB800 */
+ [board_ahci_mcp89] =
{
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_sb600_ops,
+ .port_ops = &ahci_ops,
},
- [board_ahci_mcp65] =
+ [board_ahci_mv] =
{
- AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
- .flags = AHCI_FLAG_COMMON,
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
- [board_ahci_nopmp] =
+ [board_ahci_sb600] =
{
- AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+ AHCI_HFLAG_32BIT_ONLY),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
+ .port_ops = &ahci_sb600_ops,
},
- [board_ahci_yesncq] =
+ [board_ahci_sb700] = /* for SB700 and SB800 */
{
- AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
+ .port_ops = &ahci_sb600_ops,
},
- [board_ahci_nosntf] =
+ [board_ahci_vt8251] =
{
- AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
+ .port_ops = &ahci_vt8251_ops,
},
};
@@ -629,82 +277,82 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0581), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0582), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0583), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0584), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0585), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0586), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0587), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0588), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x0589), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x058a), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x058b), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x058c), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x058d), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x058e), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x058f), board_ahci_yesncq }, /* Linux ID */
- { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
- { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
- { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_mcp67 }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0581), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0582), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0583), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0584), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0585), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0586), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0587), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0588), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x0589), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x058a), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x058b), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x058c), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x058d), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x058e), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x058f), board_ahci_mcp_linux }, /* Linux ID */
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_mcp73 }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci_mcp77 }, /* MCP77 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci_mcp79 }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci_mcp89 }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci_mcp89 }, /* MCP89 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
@@ -737,12 +385,6 @@ static struct pci_driver ahci_pci_driver = {
#endif
};
-static int ahci_em_messages = 1;
-module_param(ahci_em_messages, int, 0444);
-/* add other LED protocol types when they become supported */
-MODULE_PARM_DESC(ahci_em_messages,
- "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
-
#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
static int marvell_enable;
#else
@@ -752,166 +394,15 @@ module_param(marvell_enable, int, 0644);
MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
-static inline int ahci_nr_ports(u32 cap)
-{
- return (cap & 0x1f) + 1;
-}
-
-static inline void __iomem *__ahci_port_base(struct ata_host *host,
- unsigned int port_no)
-{
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-
- return mmio + 0x100 + (port_no * 0x80);
-}
-
-static inline void __iomem *ahci_port_base(struct ata_port *ap)
-{
- return __ahci_port_base(ap->host, ap->port_no);
-}
-
-static void ahci_enable_ahci(void __iomem *mmio)
-{
- int i;
- u32 tmp;
-
- /* turn on AHCI_EN */
- tmp = readl(mmio + HOST_CTL);
- if (tmp & HOST_AHCI_EN)
- return;
-
- /* Some controllers need AHCI_EN to be written multiple times.
- * Try a few times before giving up.
- */
- for (i = 0; i < 5; i++) {
- tmp |= HOST_AHCI_EN;
- writel(tmp, mmio + HOST_CTL);
- tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
- if (tmp & HOST_AHCI_EN)
- return;
- msleep(10);
- }
-
- WARN_ON(1);
-}
-
-static ssize_t ahci_show_host_caps(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(dev);
- struct ata_port *ap = ata_shost_to_port(shost);
- struct ahci_host_priv *hpriv = ap->host->private_data;
-
- return sprintf(buf, "%x\n", hpriv->cap);
-}
-
-static ssize_t ahci_show_host_cap2(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(dev);
- struct ata_port *ap = ata_shost_to_port(shost);
- struct ahci_host_priv *hpriv = ap->host->private_data;
-
- return sprintf(buf, "%x\n", hpriv->cap2);
-}
-
-static ssize_t ahci_show_host_version(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(dev);
- struct ata_port *ap = ata_shost_to_port(shost);
- void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-
- return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
-}
-
-static ssize_t ahci_show_port_cmd(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = class_to_shost(dev);
- struct ata_port *ap = ata_shost_to_port(shost);
- void __iomem *port_mmio = ahci_port_base(ap);
-
- return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
-}
-
-/**
- * ahci_save_initial_config - Save and fixup initial config values
- * @pdev: target PCI device
- * @hpriv: host private area to store config values
- *
- * Some registers containing configuration info might be setup by
- * BIOS and might be cleared on reset. This function saves the
- * initial values of those registers into @hpriv such that they
- * can be restored after controller reset.
- *
- * If inconsistent, config values are fixed up by this function.
- *
- * LOCKING:
- * None.
- */
-static void ahci_save_initial_config(struct pci_dev *pdev,
- struct ahci_host_priv *hpriv)
+static void ahci_pci_save_initial_config(struct pci_dev *pdev,
+ struct ahci_host_priv *hpriv)
{
- void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
- u32 cap, cap2, vers, port_map;
- int i;
- int mv;
-
- /* make sure AHCI mode is enabled before accessing CAP */
- ahci_enable_ahci(mmio);
+ unsigned int force_port_map = 0;
+ unsigned int mask_port_map = 0;
- /* Values prefixed with saved_ are written back to host after
- * reset. Values without are used for driver operation.
- */
- hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
- hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
-
- /* CAP2 register is only defined for AHCI 1.2 and later */
- vers = readl(mmio + HOST_VERSION);
- if ((vers >> 16) > 1 ||
- ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
- hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
- else
- hpriv->saved_cap2 = cap2 = 0;
-
- /* some chips have errata preventing 64bit use */
- if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
- dev_printk(KERN_INFO, &pdev->dev,
- "controller can't do 64bit DMA, forcing 32bit\n");
- cap &= ~HOST_CAP_64;
- }
-
- if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
- dev_printk(KERN_INFO, &pdev->dev,
- "controller can't do NCQ, turning off CAP_NCQ\n");
- cap &= ~HOST_CAP_NCQ;
- }
-
- if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
- dev_printk(KERN_INFO, &pdev->dev,
- "controller can do NCQ, turning on CAP_NCQ\n");
- cap |= HOST_CAP_NCQ;
- }
-
- if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
- dev_printk(KERN_INFO, &pdev->dev,
- "controller can't do PMP, turning off CAP_PMP\n");
- cap &= ~HOST_CAP_PMP;
- }
-
- if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
- dev_printk(KERN_INFO, &pdev->dev,
- "controller can't do SNTF, turning off CAP_SNTF\n");
- cap &= ~HOST_CAP_SNTF;
- }
-
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
- port_map != 1) {
- dev_printk(KERN_INFO, &pdev->dev,
- "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
- port_map, 1);
- port_map = 1;
+ if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
+ dev_info(&pdev->dev, "JMB361 has only one port\n");
+ force_port_map = 1;
}
/*
@@ -921,469 +412,25 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
*/
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
if (pdev->device == 0x6121)
- mv = 0x3;
+ mask_port_map = 0x3;
else
- mv = 0xf;
- dev_printk(KERN_ERR, &pdev->dev,
- "MV_AHCI HACK: port_map %x -> %x\n",
- port_map,
- port_map & mv);
- dev_printk(KERN_ERR, &pdev->dev,
+ mask_port_map = 0xf;
+ dev_info(&pdev->dev,
"Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
-
- port_map &= mv;
}
- /* cross check port_map and cap.n_ports */
- if (port_map) {
- int map_ports = 0;
-
- for (i = 0; i < AHCI_MAX_PORTS; i++)
- if (port_map & (1 << i))
- map_ports++;
-
- /* If PI has more ports than n_ports, whine, clear
- * port_map and let it be generated from n_ports.
- */
- if (map_ports > ahci_nr_ports(cap)) {
- dev_printk(KERN_WARNING, &pdev->dev,
- "implemented port map (0x%x) contains more "
- "ports than nr_ports (%u), using nr_ports\n",
- port_map, ahci_nr_ports(cap));
- port_map = 0;
- }
- }
-
- /* fabricate port_map from cap.nr_ports */
- if (!port_map) {
- port_map = (1 << ahci_nr_ports(cap)) - 1;
- dev_printk(KERN_WARNING, &pdev->dev,
- "forcing PORTS_IMPL to 0x%x\n", port_map);
-
- /* write the fixed up value to the PI register */
- hpriv->saved_port_map = port_map;
- }
-
- /* record values to use during operation */
- hpriv->cap = cap;
- hpriv->cap2 = cap2;
- hpriv->port_map = port_map;
-}
-
-/**
- * ahci_restore_initial_config - Restore initial config
- * @host: target ATA host
- *
- * Restore initial config stored by ahci_save_initial_config().
- *
- * LOCKING:
- * None.
- */
-static void ahci_restore_initial_config(struct ata_host *host)
-{
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-
- writel(hpriv->saved_cap, mmio + HOST_CAP);
- if (hpriv->saved_cap2)
- writel(hpriv->saved_cap2, mmio + HOST_CAP2);
- writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
- (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
-}
-
-static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
-{
- static const int offset[] = {
- [SCR_STATUS] = PORT_SCR_STAT,
- [SCR_CONTROL] = PORT_SCR_CTL,
- [SCR_ERROR] = PORT_SCR_ERR,
- [SCR_ACTIVE] = PORT_SCR_ACT,
- [SCR_NOTIFICATION] = PORT_SCR_NTF,
- };
- struct ahci_host_priv *hpriv = ap->host->private_data;
-
- if (sc_reg < ARRAY_SIZE(offset) &&
- (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
- return offset[sc_reg];
- return 0;
-}
-
-static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- int offset = ahci_scr_offset(link->ap, sc_reg);
-
- if (offset) {
- *val = readl(port_mmio + offset);
- return 0;
- }
- return -EINVAL;
-}
-
-static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- int offset = ahci_scr_offset(link->ap, sc_reg);
-
- if (offset) {
- writel(val, port_mmio + offset);
- return 0;
- }
- return -EINVAL;
-}
-
-static void ahci_start_engine(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 tmp;
-
- /* start DMA */
- tmp = readl(port_mmio + PORT_CMD);
- tmp |= PORT_CMD_START;
- writel(tmp, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* flush */
-}
-
-static int ahci_stop_engine(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 tmp;
-
- tmp = readl(port_mmio + PORT_CMD);
-
- /* check if the HBA is idle */
- if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
- return 0;
-
- /* setting HBA to idle */
- tmp &= ~PORT_CMD_START;
- writel(tmp, port_mmio + PORT_CMD);
-
- /* wait for engine to stop. This could be as long as 500 msec */
- tmp = ata_wait_register(port_mmio + PORT_CMD,
- PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
- if (tmp & PORT_CMD_LIST_ON)
- return -EIO;
-
- return 0;
-}
-
-static void ahci_start_fis_rx(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_host_priv *hpriv = ap->host->private_data;
- struct ahci_port_priv *pp = ap->private_data;
- u32 tmp;
-
- /* set FIS registers */
- if (hpriv->cap & HOST_CAP_64)
- writel((pp->cmd_slot_dma >> 16) >> 16,
- port_mmio + PORT_LST_ADDR_HI);
- writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
-
- if (hpriv->cap & HOST_CAP_64)
- writel((pp->rx_fis_dma >> 16) >> 16,
- port_mmio + PORT_FIS_ADDR_HI);
- writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
-
- /* enable FIS reception */
- tmp = readl(port_mmio + PORT_CMD);
- tmp |= PORT_CMD_FIS_RX;
- writel(tmp, port_mmio + PORT_CMD);
-
- /* flush */
- readl(port_mmio + PORT_CMD);
+ ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
+ mask_port_map);
}
-static int ahci_stop_fis_rx(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 tmp;
-
- /* disable FIS reception */
- tmp = readl(port_mmio + PORT_CMD);
- tmp &= ~PORT_CMD_FIS_RX;
- writel(tmp, port_mmio + PORT_CMD);
-
- /* wait for completion, spec says 500ms, give it 1000 */
- tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
- PORT_CMD_FIS_ON, 10, 1000);
- if (tmp & PORT_CMD_FIS_ON)
- return -EBUSY;
-
- return 0;
-}
-
-static void ahci_power_up(struct ata_port *ap)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
-
- cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-
- /* spin up device */
- if (hpriv->cap & HOST_CAP_SSS) {
- cmd |= PORT_CMD_SPIN_UP;
- writel(cmd, port_mmio + PORT_CMD);
- }
-
- /* wake up link */
- writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
-}
-
-static void ahci_disable_alpm(struct ata_port *ap)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
- struct ahci_port_priv *pp = ap->private_data;
-
- /* IPM bits should be disabled by libata-core */
- /* get the existing command bits */
- cmd = readl(port_mmio + PORT_CMD);
-
- /* disable ALPM and ASP */
- cmd &= ~PORT_CMD_ASP;
- cmd &= ~PORT_CMD_ALPE;
-
- /* force the interface back to active */
- cmd |= PORT_CMD_ICC_ACTIVE;
-
- /* write out new cmd value */
- writel(cmd, port_mmio + PORT_CMD);
- cmd = readl(port_mmio + PORT_CMD);
-
- /* wait 10ms to be sure we've come out of any low power state */
- msleep(10);
-
- /* clear out any PhyRdy stuff from interrupt status */
- writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-
- /* go ahead and clean out PhyRdy Change from Serror too */
- ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-
- /*
- * Clear flag to indicate that we should ignore all PhyRdy
- * state changes
- */
- hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-
- /*
- * Enable interrupts on Phy Ready.
- */
- pp->intr_mask |= PORT_IRQ_PHYRDY;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
- /*
- * don't change the link pm policy - we can be called
- * just to turn of link pm temporarily
- */
-}
-
-static int ahci_enable_alpm(struct ata_port *ap,
- enum link_pm policy)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd;
- struct ahci_port_priv *pp = ap->private_data;
- u32 asp;
-
- /* Make sure the host is capable of link power management */
- if (!(hpriv->cap & HOST_CAP_ALPM))
- return -EINVAL;
-
- switch (policy) {
- case MAX_PERFORMANCE:
- case NOT_AVAILABLE:
- /*
- * if we came here with NOT_AVAILABLE,
- * it just means this is the first time we
- * have tried to enable - default to max performance,
- * and let the user go to lower power modes on request.
- */
- ahci_disable_alpm(ap);
- return 0;
- case MIN_POWER:
- /* configure HBA to enter SLUMBER */
- asp = PORT_CMD_ASP;
- break;
- case MEDIUM_POWER:
- /* configure HBA to enter PARTIAL */
- asp = 0;
- break;
- default:
- return -EINVAL;
- }
-
- /*
- * Disable interrupts on Phy Ready. This keeps us from
- * getting woken up due to spurious phy ready interrupts
- * TBD - Hot plug should be done via polling now, is
- * that even supported?
- */
- pp->intr_mask &= ~PORT_IRQ_PHYRDY;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
- /*
- * Set a flag to indicate that we should ignore all PhyRdy
- * state changes since these can happen now whenever we
- * change link state
- */
- hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
-
- /* get the existing command bits */
- cmd = readl(port_mmio + PORT_CMD);
-
- /*
- * Set ASP based on Policy
- */
- cmd |= asp;
-
- /*
- * Setting this bit will instruct the HBA to aggressively
- * enter a lower power link state when it's appropriate and
- * based on the value set above for ASP
- */
- cmd |= PORT_CMD_ALPE;
-
- /* write out new cmd value */
- writel(cmd, port_mmio + PORT_CMD);
- cmd = readl(port_mmio + PORT_CMD);
-
- /* IPM bits should be set by libata-core */
- return 0;
-}
-
-#ifdef CONFIG_PM
-static void ahci_power_down(struct ata_port *ap)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd, scontrol;
-
- if (!(hpriv->cap & HOST_CAP_SSS))
- return;
-
- /* put device into listen mode, first set PxSCTL.DET to 0 */
- scontrol = readl(port_mmio + PORT_SCR_CTL);
- scontrol &= ~0xf;
- writel(scontrol, port_mmio + PORT_SCR_CTL);
-
- /* then set PxCMD.SUD to 0 */
- cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
- cmd &= ~PORT_CMD_SPIN_UP;
- writel(cmd, port_mmio + PORT_CMD);
-}
-#endif
-
-static void ahci_start_port(struct ata_port *ap)
-{
- struct ahci_port_priv *pp = ap->private_data;
- struct ata_link *link;
- struct ahci_em_priv *emp;
- ssize_t rc;
- int i;
-
- /* enable FIS reception */
- ahci_start_fis_rx(ap);
-
- /* enable DMA */
- ahci_start_engine(ap);
-
- /* turn on LEDs */
- if (ap->flags & ATA_FLAG_EM) {
- ata_for_each_link(link, ap, EDGE) {
- emp = &pp->em_priv[link->pmp];
-
- /* EM Transmit bit maybe busy during init */
- for (i = 0; i < EM_MAX_RETRY; i++) {
- rc = ahci_transmit_led_message(ap,
- emp->led_state,
- 4);
- if (rc == -EBUSY)
- msleep(1);
- else
- break;
- }
- }
- }
-
- if (ap->flags & ATA_FLAG_SW_ACTIVITY)
- ata_for_each_link(link, ap, EDGE)
- ahci_init_sw_activity(link);
-
-}
-
-static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
-{
- int rc;
-
- /* disable DMA */
- rc = ahci_stop_engine(ap);
- if (rc) {
- *emsg = "failed to stop engine";
- return rc;
- }
-
- /* disable FIS reception */
- rc = ahci_stop_fis_rx(ap);
- if (rc) {
- *emsg = "failed stop FIS RX";
- return rc;
- }
-
- return 0;
-}
-
-static int ahci_reset_controller(struct ata_host *host)
+static int ahci_pci_reset_controller(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
- u32 tmp;
- /* we must be in AHCI mode, before using anything
- * AHCI-specific, such as HOST_RESET.
- */
- ahci_enable_ahci(mmio);
-
- /* global controller reset */
- if (!ahci_skip_host_reset) {
- tmp = readl(mmio + HOST_CTL);
- if ((tmp & HOST_RESET) == 0) {
- writel(tmp | HOST_RESET, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
- }
-
- /*
- * to perform host reset, OS should set HOST_RESET
- * and poll until this bit is read to be "0".
- * reset must complete within 1 second, or
- * the hardware should be considered fried.
- */
- tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
- HOST_RESET, 10, 1000);
-
- if (tmp & HOST_RESET) {
- dev_printk(KERN_ERR, host->dev,
- "controller reset failed (0x%x)\n", tmp);
- return -EIO;
- }
-
- /* turn on AHCI mode */
- ahci_enable_ahci(mmio);
-
- /* Some registers might be cleared on reset. Restore
- * initial values.
- */
- ahci_restore_initial_config(host);
- } else
- dev_printk(KERN_INFO, host->dev,
- "skipping global host reset\n");
+ ahci_reset_controller(host);
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+ struct ahci_host_priv *hpriv = host->private_data;
u16 tmp16;
/* configure PCS */
@@ -1397,267 +444,10 @@ static int ahci_reset_controller(struct ata_host *host)
return 0;
}
-static void ahci_sw_activity(struct ata_link *link)
-{
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-
- if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
- return;
-
- emp->activity++;
- if (!timer_pending(&emp->timer))
- mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
-}
-
-static void ahci_sw_activity_blink(unsigned long arg)
-{
- struct ata_link *link = (struct ata_link *)arg;
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
- unsigned long led_message = emp->led_state;
- u32 activity_led_state;
- unsigned long flags;
-
- led_message &= EM_MSG_LED_VALUE;
- led_message |= ap->port_no | (link->pmp << 8);
-
- /* check to see if we've had activity. If so,
- * toggle state of LED and reset timer. If not,
- * turn LED to desired idle state.
- */
- spin_lock_irqsave(ap->lock, flags);
- if (emp->saved_activity != emp->activity) {
- emp->saved_activity = emp->activity;
- /* get the current LED state */
- activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
-
- if (activity_led_state)
- activity_led_state = 0;
- else
- activity_led_state = 1;
-
- /* clear old state */
- led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
-
- /* toggle state */
- led_message |= (activity_led_state << 16);
- mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
- } else {
- /* switch to idle */
- led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
- if (emp->blink_policy == BLINK_OFF)
- led_message |= (1 << 16);
- }
- spin_unlock_irqrestore(ap->lock, flags);
- ahci_transmit_led_message(ap, led_message, 4);
-}
-
-static void ahci_init_sw_activity(struct ata_link *link)
-{
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-
- /* init activity stats, setup timer */
- emp->saved_activity = emp->activity = 0;
- setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
-
- /* check our blink policy and set flag for link if it's enabled */
- if (emp->blink_policy)
- link->flags |= ATA_LFLAG_SW_ACTIVITY;
-}
-
-static int ahci_reset_em(struct ata_host *host)
-{
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
- u32 em_ctl;
-
- em_ctl = readl(mmio + HOST_EM_CTL);
- if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
- return -EINVAL;
-
- writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
- return 0;
-}
-
-static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
- ssize_t size)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
- u32 em_ctl;
- u32 message[] = {0, 0};
- unsigned long flags;
- int pmp;
- struct ahci_em_priv *emp;
-
- /* get the slot number from the message */
- pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
- if (pmp < EM_MAX_SLOTS)
- emp = &pp->em_priv[pmp];
- else
- return -EINVAL;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /*
- * if we are still busy transmitting a previous message,
- * do not allow
- */
- em_ctl = readl(mmio + HOST_EM_CTL);
- if (em_ctl & EM_CTL_TM) {
- spin_unlock_irqrestore(ap->lock, flags);
- return -EBUSY;
- }
-
- /*
- * create message header - this is all zero except for
- * the message size, which is 4 bytes.
- */
- message[0] |= (4 << 8);
-
- /* ignore 0:4 of byte zero, fill in port info yourself */
- message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
-
- /* write message to EM_LOC */
- writel(message[0], mmio + hpriv->em_loc);
- writel(message[1], mmio + hpriv->em_loc+4);
-
- /* save off new led state for port/slot */
- emp->led_state = state;
-
- /*
- * tell hardware to transmit the message
- */
- writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
-
- spin_unlock_irqrestore(ap->lock, flags);
- return size;
-}
-
-static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
-{
- struct ahci_port_priv *pp = ap->private_data;
- struct ata_link *link;
- struct ahci_em_priv *emp;
- int rc = 0;
-
- ata_for_each_link(link, ap, EDGE) {
- emp = &pp->em_priv[link->pmp];
- rc += sprintf(buf, "%lx\n", emp->led_state);
- }
- return rc;
-}
-
-static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
- size_t size)
-{
- int state;
- int pmp;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_em_priv *emp;
-
- state = simple_strtoul(buf, NULL, 0);
-
- /* get the slot number from the message */
- pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
- if (pmp < EM_MAX_SLOTS)
- emp = &pp->em_priv[pmp];
- else
- return -EINVAL;
-
- /* mask off the activity bits if we are in sw_activity
- * mode, user should turn off sw_activity before setting
- * activity led through em_message
- */
- if (emp->blink_policy)
- state &= ~EM_MSG_LED_VALUE_ACTIVITY;
-
- return ahci_transmit_led_message(ap, state, size);
-}
-
-static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
-{
- struct ata_link *link = dev->link;
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
- u32 port_led_state = emp->led_state;
-
- /* save the desired Activity LED behavior */
- if (val == OFF) {
- /* clear LFLAG */
- link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
-
- /* set the LED to OFF */
- port_led_state &= EM_MSG_LED_VALUE_OFF;
- port_led_state |= (ap->port_no | (link->pmp << 8));
- ahci_transmit_led_message(ap, port_led_state, 4);
- } else {
- link->flags |= ATA_LFLAG_SW_ACTIVITY;
- if (val == BLINK_OFF) {
- /* set LED to ON for idle */
- port_led_state &= EM_MSG_LED_VALUE_OFF;
- port_led_state |= (ap->port_no | (link->pmp << 8));
- port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
- ahci_transmit_led_message(ap, port_led_state, 4);
- }
- }
- emp->blink_policy = val;
- return 0;
-}
-
-static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
-{
- struct ata_link *link = dev->link;
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-
- /* display the saved value of activity behavior for this
- * disk.
- */
- return sprintf(buf, "%d\n", emp->blink_policy);
-}
-
-static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
- int port_no, void __iomem *mmio,
- void __iomem *port_mmio)
-{
- const char *emsg = NULL;
- int rc;
- u32 tmp;
-
- /* make sure port is not active */
- rc = ahci_deinit_port(ap, &emsg);
- if (rc)
- dev_printk(KERN_WARNING, &pdev->dev,
- "%s (%d)\n", emsg, rc);
-
- /* clear SError */
- tmp = readl(port_mmio + PORT_SCR_ERR);
- VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
- writel(tmp, port_mmio + PORT_SCR_ERR);
-
- /* clear port IRQ */
- tmp = readl(port_mmio + PORT_IRQ_STAT);
- VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
- if (tmp)
- writel(tmp, port_mmio + PORT_IRQ_STAT);
-
- writel(1 << port_no, mmio + HOST_IRQ_STAT);
-}
-
-static void ahci_init_controller(struct ata_host *host)
+static void ahci_pci_init_controller(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
- int i;
void __iomem *port_mmio;
u32 tmp;
int mv;
@@ -1678,220 +468,7 @@ static void ahci_init_controller(struct ata_host *host)
writel(tmp, port_mmio + PORT_IRQ_STAT);
}
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- port_mmio = ahci_port_base(ap);
- if (ata_port_is_dummy(ap))
- continue;
-
- ahci_port_init(pdev, ap, i, mmio, port_mmio);
- }
-
- tmp = readl(mmio + HOST_CTL);
- VPRINTK("HOST_CTL 0x%x\n", tmp);
- writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
- tmp = readl(mmio + HOST_CTL);
- VPRINTK("HOST_CTL 0x%x\n", tmp);
-}
-
-static void ahci_dev_config(struct ata_device *dev)
-{
- struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
-
- if (hpriv->flags & AHCI_HFLAG_SECT255) {
- dev->max_sectors = 255;
- ata_dev_printk(dev, KERN_INFO,
- "SB600 AHCI: limiting to 255 sectors per cmd\n");
- }
-}
-
-static unsigned int ahci_dev_classify(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ata_taskfile tf;
- u32 tmp;
-
- tmp = readl(port_mmio + PORT_SIG);
- tf.lbah = (tmp >> 24) & 0xff;
- tf.lbam = (tmp >> 16) & 0xff;
- tf.lbal = (tmp >> 8) & 0xff;
- tf.nsect = (tmp) & 0xff;
-
- return ata_dev_classify(&tf);
-}
-
-static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
- u32 opts)
-{
- dma_addr_t cmd_tbl_dma;
-
- cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
-
- pp->cmd_slot[tag].opts = cpu_to_le32(opts);
- pp->cmd_slot[tag].status = 0;
- pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
- pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
-}
-
-static int ahci_kick_engine(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_host_priv *hpriv = ap->host->private_data;
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
- u32 tmp;
- int busy, rc;
-
- /* stop engine */
- rc = ahci_stop_engine(ap);
- if (rc)
- goto out_restart;
-
- /* need to do CLO?
- * always do CLO if PMP is attached (AHCI-1.3 9.2)
- */
- busy = status & (ATA_BUSY | ATA_DRQ);
- if (!busy && !sata_pmp_attached(ap)) {
- rc = 0;
- goto out_restart;
- }
-
- if (!(hpriv->cap & HOST_CAP_CLO)) {
- rc = -EOPNOTSUPP;
- goto out_restart;
- }
-
- /* perform CLO */
- tmp = readl(port_mmio + PORT_CMD);
- tmp |= PORT_CMD_CLO;
- writel(tmp, port_mmio + PORT_CMD);
-
- rc = 0;
- tmp = ata_wait_register(port_mmio + PORT_CMD,
- PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
- if (tmp & PORT_CMD_CLO)
- rc = -EIO;
-
- /* restart engine */
- out_restart:
- ahci_start_engine(ap);
- return rc;
-}
-
-static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
- struct ata_taskfile *tf, int is_cmd, u16 flags,
- unsigned long timeout_msec)
-{
- const u32 cmd_fis_len = 5; /* five dwords */
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u8 *fis = pp->cmd_tbl;
- u32 tmp;
-
- /* prep the command */
- ata_tf_to_fis(tf, pmp, is_cmd, fis);
- ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
-
- /* issue & wait */
- writel(1, port_mmio + PORT_CMD_ISSUE);
-
- if (timeout_msec) {
- tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
- 1, timeout_msec);
- if (tmp & 0x1) {
- ahci_kick_engine(ap);
- return -EBUSY;
- }
- } else
- readl(port_mmio + PORT_CMD_ISSUE); /* flush */
-
- return 0;
-}
-
-static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
- int pmp, unsigned long deadline,
- int (*check_ready)(struct ata_link *link))
-{
- struct ata_port *ap = link->ap;
- struct ahci_host_priv *hpriv = ap->host->private_data;
- const char *reason = NULL;
- unsigned long now, msecs;
- struct ata_taskfile tf;
- int rc;
-
- DPRINTK("ENTER\n");
-
- /* prepare for SRST (AHCI-1.1 10.4.1) */
- rc = ahci_kick_engine(ap);
- if (rc && rc != -EOPNOTSUPP)
- ata_link_printk(link, KERN_WARNING,
- "failed to reset engine (errno=%d)\n", rc);
-
- ata_tf_init(link->device, &tf);
-
- /* issue the first D2H Register FIS */
- msecs = 0;
- now = jiffies;
- if (time_after(now, deadline))
- msecs = jiffies_to_msecs(deadline - now);
-
- tf.ctl |= ATA_SRST;
- if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
- AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
- rc = -EIO;
- reason = "1st FIS failed";
- goto fail;
- }
-
- /* spec says at least 5us, but be generous and sleep for 1ms */
- msleep(1);
-
- /* issue the second D2H Register FIS */
- tf.ctl &= ~ATA_SRST;
- ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
-
- /* wait for link to become ready */
- rc = ata_wait_after_reset(link, deadline, check_ready);
- if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
- /*
- * Workaround for cases where link online status can't
- * be trusted. Treat device readiness timeout as link
- * offline.
- */
- ata_link_printk(link, KERN_INFO,
- "device not ready, treating as offline\n");
- *class = ATA_DEV_NONE;
- } else if (rc) {
- /* link occupied, -ENODEV too is an error */
- reason = "device not ready";
- goto fail;
- } else
- *class = ahci_dev_classify(ap);
-
- DPRINTK("EXIT, class=%u\n", *class);
- return 0;
-
- fail:
- ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
- return rc;
-}
-
-static int ahci_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
- return ata_check_ready(status);
-}
-
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- int pmp = sata_srst_pmp(link);
-
- DPRINTK("ENTER\n");
-
- return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+ ahci_init_controller(host);
}
static int ahci_sb600_check_ready(struct ata_link *link)
@@ -1943,38 +520,6 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
return rc;
}
-static int ahci_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
- struct ata_taskfile tf;
- bool online;
- int rc;
-
- DPRINTK("ENTER\n");
-
- ahci_stop_engine(ap);
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
- tf.command = 0x80;
- ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-
- rc = sata_link_hardreset(link, timing, deadline, &online,
- ahci_check_ready);
-
- ahci_start_engine(ap);
-
- if (online)
- *class = ahci_dev_classify(ap);
-
- DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
- return rc;
-}
-
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -2043,605 +588,12 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
return rc;
}
-static void ahci_postreset(struct ata_link *link, unsigned int *class)
-{
- struct ata_port *ap = link->ap;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 new_tmp, tmp;
-
- ata_std_postreset(link, class);
-
- /* Make sure port's ATAPI bit is set appropriately */
- new_tmp = tmp = readl(port_mmio + PORT_CMD);
- if (*class == ATA_DEV_ATAPI)
- new_tmp |= PORT_CMD_ATAPI;
- else
- new_tmp &= ~PORT_CMD_ATAPI;
- if (new_tmp != tmp) {
- writel(new_tmp, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* flush */
- }
-}
-
-static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
-{
- struct scatterlist *sg;
- struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
- unsigned int si;
-
- VPRINTK("ENTER\n");
-
- /*
- * Next, the S/G list.
- */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- dma_addr_t addr = sg_dma_address(sg);
- u32 sg_len = sg_dma_len(sg);
-
- ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
- ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
- }
-
- return si;
-}
-
-static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ahci_port_priv *pp = ap->private_data;
-
- if (!sata_pmp_attached(ap) || pp->fbs_enabled)
- return ata_std_qc_defer(qc);
- else
- return sata_pmp_qc_defer_cmd_switch(qc);
-}
-
-static void ahci_qc_prep(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ahci_port_priv *pp = ap->private_data;
- int is_atapi = ata_is_atapi(qc->tf.protocol);
- void *cmd_tbl;
- u32 opts;
- const u32 cmd_fis_len = 5; /* five dwords */
- unsigned int n_elem;
-
- /*
- * Fill in command table information. First, the header,
- * a SATA Register - Host to Device command FIS.
- */
- cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
-
- ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
- if (is_atapi) {
- memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
- memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
- }
-
- n_elem = 0;
- if (qc->flags & ATA_QCFLAG_DMAMAP)
- n_elem = ahci_fill_sg(qc, cmd_tbl);
-
- /*
- * Fill in command slot information.
- */
- opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
- if (qc->tf.flags & ATA_TFLAG_WRITE)
- opts |= AHCI_CMD_WRITE;
- if (is_atapi)
- opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
-
- ahci_fill_cmd_slot(pp, qc->tag, opts);
-}
-
-static void ahci_fbs_dec_intr(struct ata_port *ap)
-{
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 fbs = readl(port_mmio + PORT_FBS);
- int retries = 3;
-
- DPRINTK("ENTER\n");
- BUG_ON(!pp->fbs_enabled);
-
- /* time to wait for DEC is not specified by AHCI spec,
- * add a retry loop for safety.
- */
- writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
- fbs = readl(port_mmio + PORT_FBS);
- while ((fbs & PORT_FBS_DEC) && retries--) {
- udelay(1);
- fbs = readl(port_mmio + PORT_FBS);
- }
-
- if (fbs & PORT_FBS_DEC)
- dev_printk(KERN_ERR, ap->host->dev,
- "failed to clear device error\n");
-}
-
-static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- struct ahci_port_priv *pp = ap->private_data;
- struct ata_eh_info *host_ehi = &ap->link.eh_info;
- struct ata_link *link = NULL;
- struct ata_queued_cmd *active_qc;
- struct ata_eh_info *active_ehi;
- bool fbs_need_dec = false;
- u32 serror;
-
- /* determine active link with error */
- if (pp->fbs_enabled) {
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 fbs = readl(port_mmio + PORT_FBS);
- int pmp = fbs >> PORT_FBS_DWE_OFFSET;
-
- if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
- ata_link_online(&ap->pmp_link[pmp])) {
- link = &ap->pmp_link[pmp];
- fbs_need_dec = true;
- }
-
- } else
- ata_for_each_link(link, ap, EDGE)
- if (ata_link_active(link))
- break;
-
- if (!link)
- link = &ap->link;
-
- active_qc = ata_qc_from_tag(ap, link->active_tag);
- active_ehi = &link->eh_info;
-
- /* record irq stat */
- ata_ehi_clear_desc(host_ehi);
- ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
-
- /* AHCI needs SError cleared; otherwise, it might lock up */
- ahci_scr_read(&ap->link, SCR_ERROR, &serror);
- ahci_scr_write(&ap->link, SCR_ERROR, serror);
- host_ehi->serror |= serror;
-
- /* some controllers set IRQ_IF_ERR on device errors, ignore it */
- if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
- irq_stat &= ~PORT_IRQ_IF_ERR;
-
- if (irq_stat & PORT_IRQ_TF_ERR) {
- /* If qc is active, charge it; otherwise, the active
- * link. There's no active qc on NCQ errors. It will
- * be determined by EH by reading log page 10h.
- */
- if (active_qc)
- active_qc->err_mask |= AC_ERR_DEV;
- else
- active_ehi->err_mask |= AC_ERR_DEV;
-
- if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
- host_ehi->serror &= ~SERR_INTERNAL;
- }
-
- if (irq_stat & PORT_IRQ_UNK_FIS) {
- u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
-
- active_ehi->err_mask |= AC_ERR_HSM;
- active_ehi->action |= ATA_EH_RESET;
- ata_ehi_push_desc(active_ehi,
- "unknown FIS %08x %08x %08x %08x" ,
- unk[0], unk[1], unk[2], unk[3]);
- }
-
- if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
- active_ehi->err_mask |= AC_ERR_HSM;
- active_ehi->action |= ATA_EH_RESET;
- ata_ehi_push_desc(active_ehi, "incorrect PMP");
- }
-
- if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
- host_ehi->err_mask |= AC_ERR_HOST_BUS;
- host_ehi->action |= ATA_EH_RESET;
- ata_ehi_push_desc(host_ehi, "host bus error");
- }
-
- if (irq_stat & PORT_IRQ_IF_ERR) {
- if (fbs_need_dec)
- active_ehi->err_mask |= AC_ERR_DEV;
- else {
- host_ehi->err_mask |= AC_ERR_ATA_BUS;
- host_ehi->action |= ATA_EH_RESET;
- }
-
- ata_ehi_push_desc(host_ehi, "interface fatal error");
- }
-
- if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
- ata_ehi_hotplugged(host_ehi);
- ata_ehi_push_desc(host_ehi, "%s",
- irq_stat & PORT_IRQ_CONNECT ?
- "connection status changed" : "PHY RDY changed");
- }
-
- /* okay, let's hand over to EH */
-
- if (irq_stat & PORT_IRQ_FREEZE)
- ata_port_freeze(ap);
- else if (fbs_need_dec) {
- ata_link_abort(link);
- ahci_fbs_dec_intr(ap);
- } else
- ata_port_abort(ap);
-}
-
-static void ahci_port_intr(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ata_eh_info *ehi = &ap->link.eh_info;
- struct ahci_port_priv *pp = ap->private_data;
- struct ahci_host_priv *hpriv = ap->host->private_data;
- int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
- u32 status, qc_active = 0;
- int rc;
-
- status = readl(port_mmio + PORT_IRQ_STAT);
- writel(status, port_mmio + PORT_IRQ_STAT);
-
- /* ignore BAD_PMP while resetting */
- if (unlikely(resetting))
- status &= ~PORT_IRQ_BAD_PMP;
-
- /* If we are getting PhyRdy, this is
- * just a power state change, we should
- * clear out this, plus the PhyRdy/Comm
- * Wake bits from Serror
- */
- if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
- (status & PORT_IRQ_PHYRDY)) {
- status &= ~PORT_IRQ_PHYRDY;
- ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
- }
-
- if (unlikely(status & PORT_IRQ_ERROR)) {
- ahci_error_intr(ap, status);
- return;
- }
-
- if (status & PORT_IRQ_SDB_FIS) {
- /* If SNotification is available, leave notification
- * handling to sata_async_notification(). If not,
- * emulate it by snooping SDB FIS RX area.
- *
- * Snooping FIS RX area is probably cheaper than
- * poking SNotification but some constrollers which
- * implement SNotification, ICH9 for example, don't
- * store AN SDB FIS into receive area.
- */
- if (hpriv->cap & HOST_CAP_SNTF)
- sata_async_notification(ap);
- else {
- /* If the 'N' bit in word 0 of the FIS is set,
- * we just received asynchronous notification.
- * Tell libata about it.
- *
- * Lack of SNotification should not appear in
- * ahci 1.2, so the workaround is unnecessary
- * when FBS is enabled.
- */
- if (pp->fbs_enabled)
- WARN_ON_ONCE(1);
- else {
- const __le32 *f = pp->rx_fis + RX_FIS_SDB;
- u32 f0 = le32_to_cpu(f[0]);
- if (f0 & (1 << 15))
- sata_async_notification(ap);
- }
- }
- }
-
- /* pp->active_link is not reliable once FBS is enabled, both
- * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
- * NCQ and non-NCQ commands may be in flight at the same time.
- */
- if (pp->fbs_enabled) {
- if (ap->qc_active) {
- qc_active = readl(port_mmio + PORT_SCR_ACT);
- qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
- }
- } else {
- /* pp->active_link is valid iff any command is in flight */
- if (ap->qc_active && pp->active_link->sactive)
- qc_active = readl(port_mmio + PORT_SCR_ACT);
- else
- qc_active = readl(port_mmio + PORT_CMD_ISSUE);
- }
-
- rc = ata_qc_complete_multiple(ap, qc_active);
-
- /* while resetting, invalid completions are expected */
- if (unlikely(rc < 0 && !resetting)) {
- ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_RESET;
- ata_port_freeze(ap);
- }
-}
-
-static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
-{
- struct ata_host *host = dev_instance;
- struct ahci_host_priv *hpriv;
- unsigned int i, handled = 0;
- void __iomem *mmio;
- u32 irq_stat, irq_masked;
-
- VPRINTK("ENTER\n");
-
- hpriv = host->private_data;
- mmio = host->iomap[AHCI_PCI_BAR];
-
- /* sigh. 0xffffffff is a valid return from h/w */
- irq_stat = readl(mmio + HOST_IRQ_STAT);
- if (!irq_stat)
- return IRQ_NONE;
-
- irq_masked = irq_stat & hpriv->port_map;
-
- spin_lock(&host->lock);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
-
- if (!(irq_masked & (1 << i)))
- continue;
-
- ap = host->ports[i];
- if (ap) {
- ahci_port_intr(ap);
- VPRINTK("port %u\n", i);
- } else {
- VPRINTK("port %u (no irq)\n", i);
- if (ata_ratelimit())
- dev_printk(KERN_WARNING, host->dev,
- "interrupt on disabled port %u\n", i);
- }
-
- handled = 1;
- }
-
- /* HOST_IRQ_STAT behaves as level triggered latch meaning that
- * it should be cleared after all the port events are cleared;
- * otherwise, it will raise a spurious interrupt after each
- * valid one. Please read section 10.6.2 of ahci 1.1 for more
- * information.
- *
- * Also, use the unmasked value to clear interrupt as spurious
- * pending event on a dummy port might cause screaming IRQ.
- */
- writel(irq_stat, mmio + HOST_IRQ_STAT);
-
- spin_unlock(&host->lock);
-
- VPRINTK("EXIT\n");
-
- return IRQ_RETVAL(handled);
-}
-
-static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_port_priv *pp = ap->private_data;
-
- /* Keep track of the currently active link. It will be used
- * in completion path to determine whether NCQ phase is in
- * progress.
- */
- pp->active_link = qc->dev->link;
-
- if (qc->tf.protocol == ATA_PROT_NCQ)
- writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
-
- if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
- u32 fbs = readl(port_mmio + PORT_FBS);
- fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
- fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
- writel(fbs, port_mmio + PORT_FBS);
- pp->fbs_last_dev = qc->dev->link->pmp;
- }
-
- writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
-
- ahci_sw_activity(qc->dev->link);
-
- return 0;
-}
-
-static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
-{
- struct ahci_port_priv *pp = qc->ap->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-
- if (pp->fbs_enabled)
- d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
-
- ata_tf_from_fis(d2h_fis, &qc->result_tf);
- return true;
-}
-
-static void ahci_freeze(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
-
- /* turn IRQ off */
- writel(0, port_mmio + PORT_IRQ_MASK);
-}
-
-static void ahci_thaw(struct ata_port *ap)
-{
- void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 tmp;
- struct ahci_port_priv *pp = ap->private_data;
-
- /* clear IRQ */
- tmp = readl(port_mmio + PORT_IRQ_STAT);
- writel(tmp, port_mmio + PORT_IRQ_STAT);
- writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
-
- /* turn IRQ back on */
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-}
-
-static void ahci_error_handler(struct ata_port *ap)
-{
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- /* restart engine */
- ahci_stop_engine(ap);
- ahci_start_engine(ap);
- }
-
- sata_pmp_error_handler(ap);
-}
-
-static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
-
- /* make DMA engine forget about the failed command */
- if (qc->flags & ATA_QCFLAG_FAILED)
- ahci_kick_engine(ap);
-}
-
-static void ahci_enable_fbs(struct ata_port *ap)
-{
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 fbs;
- int rc;
-
- if (!pp->fbs_supported)
- return;
-
- fbs = readl(port_mmio + PORT_FBS);
- if (fbs & PORT_FBS_EN) {
- pp->fbs_enabled = true;
- pp->fbs_last_dev = -1; /* initialization */
- return;
- }
-
- rc = ahci_stop_engine(ap);
- if (rc)
- return;
-
- writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
- fbs = readl(port_mmio + PORT_FBS);
- if (fbs & PORT_FBS_EN) {
- dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
- pp->fbs_enabled = true;
- pp->fbs_last_dev = -1; /* initialization */
- } else
- dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
-
- ahci_start_engine(ap);
-}
-
-static void ahci_disable_fbs(struct ata_port *ap)
-{
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 fbs;
- int rc;
-
- if (!pp->fbs_supported)
- return;
-
- fbs = readl(port_mmio + PORT_FBS);
- if ((fbs & PORT_FBS_EN) == 0) {
- pp->fbs_enabled = false;
- return;
- }
-
- rc = ahci_stop_engine(ap);
- if (rc)
- return;
-
- writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
- fbs = readl(port_mmio + PORT_FBS);
- if (fbs & PORT_FBS_EN)
- dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
- else {
- dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
- pp->fbs_enabled = false;
- }
-
- ahci_start_engine(ap);
-}
-
-static void ahci_pmp_attach(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_port_priv *pp = ap->private_data;
- u32 cmd;
-
- cmd = readl(port_mmio + PORT_CMD);
- cmd |= PORT_CMD_PMP;
- writel(cmd, port_mmio + PORT_CMD);
-
- ahci_enable_fbs(ap);
-
- pp->intr_mask |= PORT_IRQ_BAD_PMP;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-}
-
-static void ahci_pmp_detach(struct ata_port *ap)
-{
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_port_priv *pp = ap->private_data;
- u32 cmd;
-
- ahci_disable_fbs(ap);
-
- cmd = readl(port_mmio + PORT_CMD);
- cmd &= ~PORT_CMD_PMP;
- writel(cmd, port_mmio + PORT_CMD);
-
- pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
- writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-}
-
-static int ahci_port_resume(struct ata_port *ap)
-{
- ahci_power_up(ap);
- ahci_start_port(ap);
-
- if (sata_pmp_attached(ap))
- ahci_pmp_attach(ap);
- else
- ahci_pmp_detach(ap);
-
- return 0;
-}
-
#ifdef CONFIG_PM
-static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
-{
- const char *emsg = NULL;
- int rc;
-
- rc = ahci_deinit_port(ap, &emsg);
- if (rc == 0)
- ahci_power_down(ap);
- else {
- ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
- ahci_start_port(ap);
- }
-
- return rc;
-}
-
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+ void __iomem *mmio = hpriv->mmio;
u32 ctl;
if (mesg.event & PM_EVENT_SUSPEND &&
@@ -2675,11 +627,11 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
+ rc = ahci_pci_reset_controller(host);
if (rc)
return rc;
- ahci_init_controller(host);
+ ahci_pci_init_controller(host);
}
ata_host_resume(host);
@@ -2688,92 +640,6 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
}
#endif
-static int ahci_port_start(struct ata_port *ap)
-{
- struct ahci_host_priv *hpriv = ap->host->private_data;
- struct device *dev = ap->host->dev;
- struct ahci_port_priv *pp;
- void *mem;
- dma_addr_t mem_dma;
- size_t dma_sz, rx_fis_sz;
-
- pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
- if (!pp)
- return -ENOMEM;
-
- /* check FBS capability */
- if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 cmd = readl(port_mmio + PORT_CMD);
- if (cmd & PORT_CMD_FBSCP)
- pp->fbs_supported = true;
- else
- dev_printk(KERN_WARNING, dev,
- "The port is not capable of FBS\n");
- }
-
- if (pp->fbs_supported) {
- dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
- rx_fis_sz = AHCI_RX_FIS_SZ * 16;
- } else {
- dma_sz = AHCI_PORT_PRIV_DMA_SZ;
- rx_fis_sz = AHCI_RX_FIS_SZ;
- }
-
- mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
- if (!mem)
- return -ENOMEM;
- memset(mem, 0, dma_sz);
-
- /*
- * First item in chunk of DMA memory: 32-slot command table,
- * 32 bytes each in size
- */
- pp->cmd_slot = mem;
- pp->cmd_slot_dma = mem_dma;
-
- mem += AHCI_CMD_SLOT_SZ;
- mem_dma += AHCI_CMD_SLOT_SZ;
-
- /*
- * Second item: Received-FIS area
- */
- pp->rx_fis = mem;
- pp->rx_fis_dma = mem_dma;
-
- mem += rx_fis_sz;
- mem_dma += rx_fis_sz;
-
- /*
- * Third item: data area for storing a single command
- * and its scatter-gather table
- */
- pp->cmd_tbl = mem;
- pp->cmd_tbl_dma = mem_dma;
-
- /*
- * Save off initial list of interrupts to be enabled.
- * This could be changed later
- */
- pp->intr_mask = DEF_PORT_IRQ;
-
- ap->private_data = pp;
-
- /* engage engines, captain */
- return ahci_port_resume(ap);
-}
-
-static void ahci_port_stop(struct ata_port *ap)
-{
- const char *emsg = NULL;
- int rc;
-
- /* de-initialize port */
- rc = ahci_deinit_port(ap, &emsg);
- if (rc)
- ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
-}
-
static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
{
int rc;
@@ -2806,31 +672,12 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
return 0;
}
-static void ahci_print_info(struct ata_host *host)
+static void ahci_pci_print_info(struct ata_host *host)
{
- struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
- void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
- u32 vers, cap, cap2, impl, speed;
- const char *speed_s;
u16 cc;
const char *scc_s;
- vers = readl(mmio + HOST_VERSION);
- cap = hpriv->cap;
- cap2 = hpriv->cap2;
- impl = hpriv->port_map;
-
- speed = (cap >> 20) & 0xf;
- if (speed == 1)
- speed_s = "1.5";
- else if (speed == 2)
- speed_s = "3";
- else if (speed == 3)
- speed_s = "6";
- else
- speed_s = "?";
-
pci_read_config_word(pdev, 0x0a, &cc);
if (cc == PCI_CLASS_STORAGE_IDE)
scc_s = "IDE";
@@ -2841,50 +688,7 @@ static void ahci_print_info(struct ata_host *host)
else
scc_s = "unknown";
- dev_printk(KERN_INFO, &pdev->dev,
- "AHCI %02x%02x.%02x%02x "
- "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
- ,
-
- (vers >> 24) & 0xff,
- (vers >> 16) & 0xff,
- (vers >> 8) & 0xff,
- vers & 0xff,
-
- ((cap >> 8) & 0x1f) + 1,
- (cap & 0x1f) + 1,
- speed_s,
- impl,
- scc_s);
-
- dev_printk(KERN_INFO, &pdev->dev,
- "flags: "
- "%s%s%s%s%s%s%s"
- "%s%s%s%s%s%s%s"
- "%s%s%s%s%s%s\n"
- ,
-
- cap & HOST_CAP_64 ? "64bit " : "",
- cap & HOST_CAP_NCQ ? "ncq " : "",
- cap & HOST_CAP_SNTF ? "sntf " : "",
- cap & HOST_CAP_MPS ? "ilck " : "",
- cap & HOST_CAP_SSS ? "stag " : "",
- cap & HOST_CAP_ALPM ? "pm " : "",
- cap & HOST_CAP_LED ? "led " : "",
- cap & HOST_CAP_CLO ? "clo " : "",
- cap & HOST_CAP_ONLY ? "only " : "",
- cap & HOST_CAP_PMP ? "pmp " : "",
- cap & HOST_CAP_FBS ? "fbs " : "",
- cap & HOST_CAP_PIO_MULTI ? "pio " : "",
- cap & HOST_CAP_SSC ? "slum " : "",
- cap & HOST_CAP_PART ? "part " : "",
- cap & HOST_CAP_CCC ? "ccc " : "",
- cap & HOST_CAP_EMS ? "ems " : "",
- cap & HOST_CAP_SXS ? "sxs " : "",
- cap2 & HOST_CAP2_APST ? "apst " : "",
- cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
- cap2 & HOST_CAP2_BOH ? "boh " : ""
- );
+ ahci_print_info(host, scc_s);
}
/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
@@ -3308,41 +1112,28 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
+ hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+
/* save initial config */
- ahci_save_initial_config(pdev, hpriv);
+ ahci_pci_save_initial_config(pdev, hpriv);
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ) {
pi.flags |= ATA_FLAG_NCQ;
- /* Auto-activate optimization is supposed to be supported on
- all AHCI controllers indicating NCQ support, but it seems
- to be broken at least on some NVIDIA MCP79 chipsets.
- Until we get info on which NVIDIA chipsets don't have this
- issue, if any, disable AA on all NVIDIA AHCIs. */
- if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+ /*
+ * Auto-activate optimization is supposed to be
+ * supported on all AHCI controllers indicating NCQ
+ * capability, but it seems to be broken on some
+ * chipsets including NVIDIAs.
+ */
+ if (!(hpriv->flags & AHCI_HFLAG_NO_FPDMA_AA))
pi.flags |= ATA_FLAG_FPDMA_AA;
}
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
- if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
- u8 messages;
- void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
- u32 em_loc = readl(mmio + HOST_EM_LOC);
- u32 em_ctl = readl(mmio + HOST_EM_CTL);
-
- messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
-
- /* we only support LED message type right now */
- if ((messages & 0x01) && (ahci_em_messages == 1)) {
- /* store em_loc */
- hpriv->em_loc = ((em_loc >> 16) * 4);
- pi.flags |= ATA_FLAG_EM;
- if (!(em_ctl & EM_CTL_ALHD))
- pi.flags |= ATA_FLAG_SW_ACTIVITY;
- }
- }
+ ahci_set_em_messages(hpriv, &pi);
if (ahci_broken_system_poweroff(pdev)) {
pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
@@ -3372,7 +1163,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
- host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
@@ -3395,7 +1185,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
- ap->em_message_type = ahci_em_messages;
+ ap->em_message_type = hpriv->em_msg_type;
/* disabled/not-implemented port */
@@ -3414,12 +1204,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = ahci_reset_controller(host);
+ rc = ahci_pci_reset_controller(host);
if (rc)
return rc;
- ahci_init_controller(host);
- ahci_print_info(host);
+ ahci_pci_init_controller(host);
+ ahci_pci_print_info(host);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
new file mode 100644
index 0000000..7113c57
--- /dev/null
+++ b/drivers/ata/ahci.h
@@ -0,0 +1,343 @@
+/*
+ * ahci.h - Common AHCI SATA definitions and declarations
+ *
+ * Maintained by: Jeff Garzik <jgarzik@...ox.com>
+ * Please ALWAYS copy linux-ide@...r.kernel.org
+ * on emails.
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#ifndef _AHCI_H
+#define _AHCI_H
+
+#include <linux/libata.h>
+
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE 0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT 0x0000000f
+#define EM_MSG_LED_PMP_SLOT 0x0000ff00
+#define EM_MSG_LED_VALUE 0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
+#define EM_MSG_LED_VALUE_OFF 0xfff80000
+#define EM_MSG_LED_VALUE_ON 0x00010000
+
+enum {
+ AHCI_MAX_PORTS = 32,
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
+ AHCI_DMA_BOUNDARY = 0xffffffff,
+ AHCI_MAX_CMDS = 32,
+ AHCI_CMD_SZ = 32,
+ AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
+ AHCI_RX_FIS_SZ = 256,
+ AHCI_CMD_TBL_CDB = 0x40,
+ AHCI_CMD_TBL_HDR_SZ = 0x80,
+ AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
+ AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
+ AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
+ AHCI_RX_FIS_SZ,
+ AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ +
+ AHCI_CMD_TBL_AR_SZ +
+ (AHCI_RX_FIS_SZ * 16),
+ AHCI_IRQ_ON_SG = (1 << 31),
+ AHCI_CMD_ATAPI = (1 << 5),
+ AHCI_CMD_WRITE = (1 << 6),
+ AHCI_CMD_PREFETCH = (1 << 7),
+ AHCI_CMD_RESET = (1 << 8),
+ AHCI_CMD_CLR_BUSY = (1 << 10),
+
+ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
+
+ /* global controller registers */
+ HOST_CAP = 0x00, /* host capabilities */
+ HOST_CTL = 0x04, /* global host control */
+ HOST_IRQ_STAT = 0x08, /* interrupt status */
+ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
+ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
+ HOST_CAP2 = 0x24, /* host capabilities, extended */
+
+ /* HOST_CTL bits */
+ HOST_RESET = (1 << 0), /* reset controller; self-clear */
+ HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
+
+ /* HOST_CAP bits */
+ HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
+ HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
+ HOST_CAP_PART = (1 << 13), /* Partial state capable */
+ HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
+ HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
+ HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
+ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
+ HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_LED = (1 << 25), /* Supports activity LED */
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
+ HOST_CAP_SNTF = (1 << 29), /* SNotification register */
+ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
+ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+
+ /* HOST_CAP2 bits */
+ HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
+ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
+ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
+
+ /* registers for each SATA port */
+ PORT_LST_ADDR = 0x00, /* command list DMA addr */
+ PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
+ PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
+ PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
+ PORT_IRQ_STAT = 0x10, /* interrupt status */
+ PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
+ PORT_CMD = 0x18, /* port command */
+ PORT_TFDATA = 0x20, /* taskfile data */
+ PORT_SIG = 0x24, /* device TF signature */
+ PORT_CMD_ISSUE = 0x38, /* command issue */
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
+ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
+ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
+ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
+ PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
+ PORT_FBS = 0x40, /* FIS-based Switching */
+
+ /* PORT_IRQ_{STAT,MASK} bits */
+ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
+ PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
+ PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
+ PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
+ PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
+ PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
+ PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
+ PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
+
+ PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
+ PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
+ PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
+ PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
+ PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
+ PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
+ PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
+ PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
+ PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
+
+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
+ PORT_IRQ_IF_ERR |
+ PORT_IRQ_CONNECT |
+ PORT_IRQ_PHYRDY |
+ PORT_IRQ_UNK_FIS |
+ PORT_IRQ_BAD_PMP,
+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
+ PORT_IRQ_TF_ERR |
+ PORT_IRQ_HBUS_DATA_ERR,
+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
+
+ /* PORT_CMD bits */
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
+ PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
+ PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */
+ PORT_CMD_PMP = (1 << 17), /* PMP attached */
+ PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
+ PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
+ PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
+ PORT_CMD_CLO = (1 << 3), /* Command list override */
+ PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
+ PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
+ PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
+
+ PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
+ PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
+ PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
+ PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+
+ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
+ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
+ PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */
+ PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */
+ PORT_FBS_SDE = (1 << 2), /* FBS single device error */
+ PORT_FBS_DEC = (1 << 1), /* FBS device error clear */
+ PORT_FBS_EN = (1 << 0), /* Enable FBS */
+
+ /* hpriv->flags bits */
+ AHCI_HFLAG_NO_NCQ = (1 << 0),
+ AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
+ AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
+ AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
+ AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
+ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
+ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
+ AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+ link offline */
+ AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
+ AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */
+
+ /* ap->flags bits */
+
+ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+ ATA_FLAG_IPM,
+
+ ICH_MAP = 0x90, /* ICH MAP register */
+
+ /* em constants */
+ EM_MAX_SLOTS = 8,
+ EM_MAX_RETRY = 5,
+
+ /* em_ctl bits */
+ EM_CTL_RST = (1 << 9), /* Reset */
+ EM_CTL_TM = (1 << 8), /* Transmit Message */
+ EM_CTL_MR = (1 << 0), /* Message Recieved */
+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
+ EM_CTL_XMT = (1 << 25), /* Transmit Only */
+ EM_CTL_SMB = (1 << 24), /* Single Message Buffer */
+
+ /* em message type */
+ EM_MSG_TYPE_LED = (1 << 0), /* LED */
+ EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */
+ EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */
+ EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */
+};
+
+struct ahci_cmd_hdr {
+ __le32 opts;
+ __le32 status;
+ __le32 tbl_addr;
+ __le32 tbl_addr_hi;
+ __le32 reserved[4];
+};
+
+struct ahci_sg {
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 reserved;
+ __le32 flags_size;
+};
+
+struct ahci_em_priv {
+ enum sw_activity blink_policy;
+ struct timer_list timer;
+ unsigned long saved_activity;
+ unsigned long activity;
+ unsigned long led_state;
+};
+
+struct ahci_port_priv {
+ struct ata_link *active_link;
+ struct ahci_cmd_hdr *cmd_slot;
+ dma_addr_t cmd_slot_dma;
+ void *cmd_tbl;
+ dma_addr_t cmd_tbl_dma;
+ void *rx_fis;
+ dma_addr_t rx_fis_dma;
+ /* for NCQ spurious interrupt analysis */
+ unsigned int ncq_saw_d2h:1;
+ unsigned int ncq_saw_dmas:1;
+ unsigned int ncq_saw_sdb:1;
+ u32 intr_mask; /* interrupts to enable */
+ bool fbs_supported; /* set iff FBS is supported */
+ bool fbs_enabled; /* set iff FBS is enabled */
+ int fbs_last_dev; /* save FBS.DEV of last FIS */
+ /* enclosure management info per PM slot */
+ struct ahci_em_priv em_priv[EM_MAX_SLOTS];
+};
+
+struct ahci_host_priv {
+ void __iomem * mmio; /* bus-independant mem map */
+ unsigned int flags; /* AHCI_HFLAG_* */
+ u32 cap; /* cap to use */
+ u32 cap2; /* cap2 to use */
+ u32 port_map; /* port map to use */
+ u32 saved_cap; /* saved initial cap */
+ u32 saved_cap2; /* saved initial cap2 */
+ u32 saved_port_map; /* saved initial port_map */
+ u32 em_loc; /* enclosure management location */
+ u32 em_buf_sz; /* EM buffer size in byte */
+ u32 em_msg_type; /* EM message type */
+};
+
+extern int ahci_ignore_sss;
+
+extern struct scsi_host_template ahci_sht;
+extern struct ata_port_operations ahci_ops;
+
+void ahci_save_initial_config(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
+void ahci_init_controller(struct ata_host *host);
+int ahci_reset_controller(struct ata_host *host);
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link));
+
+int ahci_stop_engine(struct ata_port *ap);
+void ahci_start_engine(struct ata_port *ap);
+int ahci_check_ready(struct ata_link *link);
+int ahci_kick_engine(struct ata_port *ap);
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi);
+int ahci_reset_em(struct ata_host *host);
+irqreturn_t ahci_interrupt(int irq, void *dev_instance);
+void ahci_print_info(struct ata_host *host, const char *scc_s);
+
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
+ unsigned int port_no)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+
+ return mmio + 0x100 + (port_no * 0x80);
+}
+
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+ return __ahci_port_base(ap->host, ap->port_no);
+}
+
+static inline int ahci_nr_ports(u32 cap)
+{
+ return (cap & 0x1f) + 1;
+}
+
+#endif /* _AHCI_H */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
new file mode 100644
index 0000000..5e11b16
--- /dev/null
+++ b/drivers/ata/ahci_platform.c
@@ -0,0 +1,192 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ * Jeff Garzik <jgarzik@...ox.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ * Anton Vorontsov <avorontsov@...mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+static int __init ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev->platform_data;
+ struct ata_port_info pi = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ };
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ahci_host_priv *hpriv;
+ struct ata_host *host;
+ struct resource *mem;
+ int irq;
+ int n_ports;
+ int i;
+ int rc;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(dev, "no mmio space\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
+
+ if (pdata && pdata->init) {
+ rc = pdata->init(dev);
+ if (rc)
+ return rc;
+ }
+
+ if (pdata && pdata->ata_port_info)
+ pi = *pdata->ata_port_info;
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv) {
+ rc = -ENOMEM;
+ goto err0;
+ }
+
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ if (!hpriv->mmio) {
+ dev_err(dev, "can't map %pR\n", mem);
+ rc = -ENOMEM;
+ goto err0;
+ }
+
+ ahci_save_initial_config(dev, hpriv,
+ pdata ? pdata->force_port_map : 0,
+ pdata ? pdata->mask_port_map : 0);
+
+ /* prepare host */
+ if (hpriv->cap & HOST_CAP_NCQ)
+ pi.flags |= ATA_FLAG_NCQ;
+
+ if (hpriv->cap & HOST_CAP_PMP)
+ pi.flags |= ATA_FLAG_PMP;
+
+ ahci_set_em_messages(hpriv, &pi);
+
+ /* CAP.NP sometimes indicate the index of the last enabled
+ * port, at other times, that of the last possible port, so
+ * determining the maximum port number requires looking at
+ * both CAP.NP and port_map.
+ */
+ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+ host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+ if (!host) {
+ rc = -ENOMEM;
+ goto err0;
+ }
+
+ host->private_data = hpriv;
+
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+ /* set initial link pm policy */
+ ap->pm_policy = NOT_AVAILABLE;
+
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = hpriv->em_msg_type;
+
+ /* disabled/not-implemented port */
+ if (!(hpriv->port_map & (1 << i)))
+ ap->ops = &ata_dummy_port_ops;
+ }
+
+ rc = ahci_reset_controller(host);
+ if (rc)
+ goto err0;
+
+ ahci_init_controller(host);
+ ahci_print_info(host, "platform");
+
+ rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_sht);
+ if (rc)
+ goto err0;
+
+ return 0;
+err0:
+ if (pdata && pdata->exit)
+ pdata->exit(dev);
+ return rc;
+}
+
+static int __devexit ahci_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev->platform_data;
+ struct ata_host *host = dev_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ if (pdata && pdata->exit)
+ pdata->exit(dev);
+
+ return 0;
+}
+
+static struct platform_driver ahci_driver = {
+ .probe = ahci_probe,
+ .remove = __devexit_p(ahci_remove),
+ .driver = {
+ .name = "ahci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ahci_init(void)
+{
+ return platform_driver_probe(&ahci_driver, ahci_probe);
+}
+module_init(ahci_init);
+
+static void __exit ahci_exit(void)
+{
+ platform_driver_unregister(&ahci_driver);
+}
+module_exit(ahci_exit);
+
+MODULE_DESCRIPTION("AHCI SATA platform driver");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@...mvista.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ahci");
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
new file mode 100644
index 0000000..1984a6e
--- /dev/null
+++ b/drivers/ata/libahci.c
@@ -0,0 +1,2216 @@
+/*
+ * libahci.c - Common AHCI SATA low-level routines
+ *
+ * Maintained by: Jeff Garzik <jgarzik@...ox.com>
+ * Please ALWAYS copy linux-ide@...r.kernel.org
+ * on emails.
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include "ahci.h"
+
+static int ahci_skip_host_reset;
+int ahci_ignore_sss;
+EXPORT_SYMBOL_GPL(ahci_ignore_sss);
+
+module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
+MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy);
+static void ahci_disable_alpm(struct ata_port *ap);
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size);
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size);
+
+
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
+static int ahci_port_start(struct ata_port *ap);
+static void ahci_port_stop(struct ata_port *ap);
+static void ahci_qc_prep(struct ata_queued_cmd *qc);
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
+static void ahci_freeze(struct ata_port *ap);
+static void ahci_thaw(struct ata_port *ap);
+static void ahci_enable_fbs(struct ata_port *ap);
+static void ahci_disable_fbs(struct ata_port *ap);
+static void ahci_pmp_attach(struct ata_port *ap);
+static void ahci_pmp_detach(struct ata_port *ap);
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
+static void ahci_error_handler(struct ata_port *ap);
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static int ahci_port_resume(struct ata_port *ap);
+static void ahci_dev_config(struct ata_device *dev);
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts);
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
+#endif
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
+static ssize_t ahci_activity_store(struct ata_device *dev,
+ enum sw_activity val);
+static void ahci_init_sw_activity(struct ata_link *link);
+
+static ssize_t ahci_show_host_caps(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_version(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_port_cmd(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_read_em_buffer(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_store_em_buffer(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size);
+
+static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
+static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
+static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
+static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
+ ahci_read_em_buffer, ahci_store_em_buffer);
+
+static struct device_attribute *ahci_shost_attrs[] = {
+ &dev_attr_link_power_management_policy,
+ &dev_attr_em_message_type,
+ &dev_attr_em_message,
+ &dev_attr_ahci_host_caps,
+ &dev_attr_ahci_host_cap2,
+ &dev_attr_ahci_host_version,
+ &dev_attr_ahci_port_cmd,
+ &dev_attr_em_buffer,
+ NULL
+};
+
+static struct device_attribute *ahci_sdev_attrs[] = {
+ &dev_attr_sw_activity,
+ &dev_attr_unload_heads,
+ NULL
+};
+
+struct scsi_host_template ahci_sht = {
+ ATA_NCQ_SHT("ahci"),
+ .can_queue = AHCI_MAX_CMDS - 1,
+ .sg_tablesize = AHCI_MAX_SG,
+ .dma_boundary = AHCI_DMA_BOUNDARY,
+ .shost_attrs = ahci_shost_attrs,
+ .sdev_attrs = ahci_sdev_attrs,
+};
+EXPORT_SYMBOL_GPL(ahci_sht);
+
+struct ata_port_operations ahci_ops = {
+ .inherits = &sata_pmp_port_ops,
+
+ .qc_defer = ahci_pmp_qc_defer,
+ .qc_prep = ahci_qc_prep,
+ .qc_issue = ahci_qc_issue,
+ .qc_fill_rtf = ahci_qc_fill_rtf,
+
+ .freeze = ahci_freeze,
+ .thaw = ahci_thaw,
+ .softreset = ahci_softreset,
+ .hardreset = ahci_hardreset,
+ .postreset = ahci_postreset,
+ .pmp_softreset = ahci_softreset,
+ .error_handler = ahci_error_handler,
+ .post_internal_cmd = ahci_post_internal_cmd,
+ .dev_config = ahci_dev_config,
+
+ .scr_read = ahci_scr_read,
+ .scr_write = ahci_scr_write,
+ .pmp_attach = ahci_pmp_attach,
+ .pmp_detach = ahci_pmp_detach,
+
+ .enable_pm = ahci_enable_alpm,
+ .disable_pm = ahci_disable_alpm,
+ .em_show = ahci_led_show,
+ .em_store = ahci_led_store,
+ .sw_activity_show = ahci_activity_show,
+ .sw_activity_store = ahci_activity_store,
+#ifdef CONFIG_PM
+ .port_suspend = ahci_port_suspend,
+ .port_resume = ahci_port_resume,
+#endif
+ .port_start = ahci_port_start,
+ .port_stop = ahci_port_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_ops);
+
+int ahci_em_messages = 1;
+EXPORT_SYMBOL_GPL(ahci_em_messages);
+module_param(ahci_em_messages, int, 0444);
+/* add other LED protocol types when they become supported */
+MODULE_PARM_DESC(ahci_em_messages,
+ "AHCI Enclosure Management Message control (0 = off, 1 = on)");
+
+static void ahci_enable_ahci(void __iomem *mmio)
+{
+ int i;
+ u32 tmp;
+
+ /* turn on AHCI_EN */
+ tmp = readl(mmio + HOST_CTL);
+ if (tmp & HOST_AHCI_EN)
+ return;
+
+ /* Some controllers need AHCI_EN to be written multiple times.
+ * Try a few times before giving up.
+ */
+ for (i = 0; i < 5; i++) {
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
+ if (tmp & HOST_AHCI_EN)
+ return;
+ msleep(10);
+ }
+
+ WARN_ON(1);
+}
+
+static ssize_t ahci_show_host_caps(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap);
+}
+
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
+static ssize_t ahci_show_host_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+
+ return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
+}
+
+static ssize_t ahci_show_port_cmd(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ void __iomem *port_mmio = ahci_port_base(ap);
+
+ return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
+}
+
+static ssize_t ahci_read_em_buffer(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *em_mmio = mmio + hpriv->em_loc;
+ u32 em_ctl, msg;
+ unsigned long flags;
+ size_t count;
+ int i;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT ||
+ !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return -EINVAL;
+ }
+
+ if (!(em_ctl & EM_CTL_MR)) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return -EAGAIN;
+ }
+
+ if (!(em_ctl & EM_CTL_SMB))
+ em_mmio += hpriv->em_buf_sz;
+
+ count = hpriv->em_buf_sz;
+
+ /* the count should not be larger than PAGE_SIZE */
+ if (count > PAGE_SIZE) {
+ if (printk_ratelimit())
+ ata_port_printk(ap, KERN_WARNING,
+ "EM read buffer size too large: "
+ "buffer size %u, page size %lu\n",
+ hpriv->em_buf_sz, PAGE_SIZE);
+ count = PAGE_SIZE;
+ }
+
+ for (i = 0; i < count; i += 4) {
+ msg = readl(em_mmio + i);
+ buf[i] = msg & 0xff;
+ buf[i + 1] = (msg >> 8) & 0xff;
+ buf[i + 2] = (msg >> 16) & 0xff;
+ buf[i + 3] = (msg >> 24) & 0xff;
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return i;
+}
+
+static ssize_t ahci_store_em_buffer(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *em_mmio = mmio + hpriv->em_loc;
+ u32 em_ctl, msg;
+ unsigned long flags;
+ int i;
+
+ /* check size validity */
+ if (!(ap->flags & ATA_FLAG_EM) ||
+ !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO) ||
+ size % 4 || size > hpriv->em_buf_sz)
+ return -EINVAL;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (em_ctl & EM_CTL_TM) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return -EBUSY;
+ }
+
+ for (i = 0; i < size; i += 4) {
+ msg = buf[i] | buf[i + 1] << 8 |
+ buf[i + 2] << 16 | buf[i + 3] << 24;
+ writel(msg, em_mmio + i);
+ }
+
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return size;
+}
+
+/**
+ * ahci_save_initial_config - Save and fixup initial config values
+ * @dev: target AHCI device
+ * @hpriv: host private area to store config values
+ * @force_port_map: force port map to a specified value
+ * @mask_port_map: mask out particular bits from port map
+ *
+ * Some registers containing configuration info might be setup by
+ * BIOS and might be cleared on reset. This function saves the
+ * initial values of those registers into @hpriv such that they
+ * can be restored after controller reset.
+ *
+ * If inconsistent, config values are fixed up by this function.
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_save_initial_config(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ void __iomem *mmio = hpriv->mmio;
+ u32 cap, cap2, vers, port_map;
+ int i;
+
+ /* make sure AHCI mode is enabled before accessing CAP */
+ ahci_enable_ahci(mmio);
+
+ /* Values prefixed with saved_ are written back to host after
+ * reset. Values without are used for driver operation.
+ */
+ hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
+ hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+
+ /* CAP2 register is only defined for AHCI 1.2 and later */
+ vers = readl(mmio + HOST_VERSION);
+ if ((vers >> 16) > 1 ||
+ ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+ hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+ else
+ hpriv->saved_cap2 = cap2 = 0;
+
+ /* some chips have errata preventing 64bit use */
+ if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
+ dev_printk(KERN_INFO, dev,
+ "controller can't do 64bit DMA, forcing 32bit\n");
+ cap &= ~HOST_CAP_64;
+ }
+
+ if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
+ dev_printk(KERN_INFO, dev,
+ "controller can't do NCQ, turning off CAP_NCQ\n");
+ cap &= ~HOST_CAP_NCQ;
+ }
+
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_printk(KERN_INFO, dev,
+ "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
+ dev_printk(KERN_INFO, dev,
+ "controller can't do PMP, turning off CAP_PMP\n");
+ cap &= ~HOST_CAP_PMP;
+ }
+
+ if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
+ dev_printk(KERN_INFO, dev,
+ "controller can't do SNTF, turning off CAP_SNTF\n");
+ cap &= ~HOST_CAP_SNTF;
+ }
+
+ if (force_port_map && port_map != force_port_map) {
+ dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
+ port_map, force_port_map);
+ port_map = force_port_map;
+ }
+
+ if (mask_port_map) {
+ dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
+ port_map,
+ port_map & mask_port_map);
+ port_map &= mask_port_map;
+ }
+
+ /* cross check port_map and cap.n_ports */
+ if (port_map) {
+ int map_ports = 0;
+
+ for (i = 0; i < AHCI_MAX_PORTS; i++)
+ if (port_map & (1 << i))
+ map_ports++;
+
+ /* If PI has more ports than n_ports, whine, clear
+ * port_map and let it be generated from n_ports.
+ */
+ if (map_ports > ahci_nr_ports(cap)) {
+ dev_printk(KERN_WARNING, dev,
+ "implemented port map (0x%x) contains more "
+ "ports than nr_ports (%u), using nr_ports\n",
+ port_map, ahci_nr_ports(cap));
+ port_map = 0;
+ }
+ }
+
+ /* fabricate port_map from cap.nr_ports */
+ if (!port_map) {
+ port_map = (1 << ahci_nr_ports(cap)) - 1;
+ dev_printk(KERN_WARNING, dev,
+ "forcing PORTS_IMPL to 0x%x\n", port_map);
+
+ /* write the fixed up value to the PI register */
+ hpriv->saved_port_map = port_map;
+ }
+
+ /* record values to use during operation */
+ hpriv->cap = cap;
+ hpriv->cap2 = cap2;
+ hpriv->port_map = port_map;
+}
+EXPORT_SYMBOL_GPL(ahci_save_initial_config);
+
+/**
+ * ahci_restore_initial_config - Restore initial config
+ * @host: target ATA host
+ *
+ * Restore initial config stored by ahci_save_initial_config().
+ *
+ * LOCKING:
+ * None.
+ */
+static void ahci_restore_initial_config(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+
+ writel(hpriv->saved_cap, mmio + HOST_CAP);
+ if (hpriv->saved_cap2)
+ writel(hpriv->saved_cap2, mmio + HOST_CAP2);
+ writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
+}
+
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
+{
+ static const int offset[] = {
+ [SCR_STATUS] = PORT_SCR_STAT,
+ [SCR_CONTROL] = PORT_SCR_CTL,
+ [SCR_ERROR] = PORT_SCR_ERR,
+ [SCR_ACTIVE] = PORT_SCR_ACT,
+ [SCR_NOTIFICATION] = PORT_SCR_NTF,
+ };
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ if (sc_reg < ARRAY_SIZE(offset) &&
+ (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
+ return offset[sc_reg];
+ return 0;
+}
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ int offset = ahci_scr_offset(link->ap, sc_reg);
+
+ if (offset) {
+ *val = readl(port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ int offset = ahci_scr_offset(link->ap, sc_reg);
+
+ if (offset) {
+ writel(val, port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int ahci_is_device_present(void __iomem *port_mmio)
+{
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xff;
+
+ /* Make sure PxTFD.STS.BSY and PxTFD.STS.DRQ are 0 */
+ if (status & (ATA_BUSY | ATA_DRQ))
+ return 0;
+
+ /* Make sure PxSSTS.DET is 3h */
+ status = readl(port_mmio + PORT_SCR_STAT) & 0xf;
+ if (status != 3)
+ return 0;
+ return 1;
+}
+
+void ahci_start_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ if (!ahci_is_device_present(port_mmio))
+ return;
+
+ /* start DMA */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+}
+EXPORT_SYMBOL_GPL(ahci_start_engine);
+
+int ahci_stop_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_CMD);
+
+ /* check if the HBA is idle */
+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+ return 0;
+
+ /* setting HBA to idle */
+ tmp &= ~PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for engine to stop. This could be as long as 500 msec */
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+ if (tmp & PORT_CMD_LIST_ON)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_stop_engine);
+
+static void ahci_start_fis_rx(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 tmp;
+
+ /* set FIS registers */
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->cmd_slot_dma >> 16) >> 16,
+ port_mmio + PORT_LST_ADDR_HI);
+ writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->rx_fis_dma >> 16) >> 16,
+ port_mmio + PORT_FIS_ADDR_HI);
+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+
+ /* enable FIS reception */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* flush */
+ readl(port_mmio + PORT_CMD);
+}
+
+static int ahci_stop_fis_rx(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ /* disable FIS reception */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp &= ~PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for completion, spec says 500ms, give it 1000 */
+ tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
+ PORT_CMD_FIS_ON, 10, 1000);
+ if (tmp & PORT_CMD_FIS_ON)
+ return -EBUSY;
+
+ return 0;
+}
+
+static void ahci_power_up(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+
+ /* spin up device */
+ if (hpriv->cap & HOST_CAP_SSS) {
+ cmd |= PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
+ }
+
+ /* wake up link */
+ writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
+}
+
+static void ahci_disable_alpm(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* IPM bits should be disabled by libata-core */
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* disable ALPM and ASP */
+ cmd &= ~PORT_CMD_ASP;
+ cmd &= ~PORT_CMD_ALPE;
+
+ /* force the interface back to active */
+ cmd |= PORT_CMD_ICC_ACTIVE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* wait 10ms to be sure we've come out of any low power state */
+ msleep(10);
+
+ /* clear out any PhyRdy stuff from interrupt status */
+ writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
+
+ /* go ahead and clean out PhyRdy Change from Serror too */
+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+
+ /*
+ * Clear flag to indicate that we should ignore all PhyRdy
+ * state changes
+ */
+ hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
+
+ /*
+ * Enable interrupts on Phy Ready.
+ */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * don't change the link pm policy - we can be called
+ * just to turn of link pm temporarily
+ */
+}
+
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 asp;
+
+ /* Make sure the host is capable of link power management */
+ if (!(hpriv->cap & HOST_CAP_ALPM))
+ return -EINVAL;
+
+ switch (policy) {
+ case MAX_PERFORMANCE:
+ case NOT_AVAILABLE:
+ /*
+ * if we came here with NOT_AVAILABLE,
+ * it just means this is the first time we
+ * have tried to enable - default to max performance,
+ * and let the user go to lower power modes on request.
+ */
+ ahci_disable_alpm(ap);
+ return 0;
+ case MIN_POWER:
+ /* configure HBA to enter SLUMBER */
+ asp = PORT_CMD_ASP;
+ break;
+ case MEDIUM_POWER:
+ /* configure HBA to enter PARTIAL */
+ asp = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready interrupts
+ * TBD - Hot plug should be done via polling now, is
+ * that even supported?
+ */
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * Set a flag to indicate that we should ignore all PhyRdy
+ * state changes since these can happen now whenever we
+ * change link state
+ */
+ hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /*
+ * Set ASP based on Policy
+ */
+ cmd |= asp;
+
+ /*
+ * Setting this bit will instruct the HBA to aggressively
+ * enter a lower power link state when it's appropriate and
+ * based on the value set above for ASP
+ */
+ cmd |= PORT_CMD_ALPE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* IPM bits should be set by libata-core */
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static void ahci_power_down(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd, scontrol;
+
+ if (!(hpriv->cap & HOST_CAP_SSS))
+ return;
+
+ /* put device into listen mode, first set PxSCTL.DET to 0 */
+ scontrol = readl(port_mmio + PORT_SCR_CTL);
+ scontrol &= ~0xf;
+ writel(scontrol, port_mmio + PORT_SCR_CTL);
+
+ /* then set PxCMD.SUD to 0 */
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+ cmd &= ~PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
+}
+#endif
+
+static void ahci_start_port(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ ssize_t rc;
+ int i;
+
+ /* enable FIS reception */
+ ahci_start_fis_rx(ap);
+
+ /* enable DMA */
+ ahci_start_engine(ap);
+
+ /* turn on LEDs */
+ if (ap->flags & ATA_FLAG_EM) {
+ ata_for_each_link(link, ap, EDGE) {
+ emp = &pp->em_priv[link->pmp];
+
+ /* EM Transmit bit maybe busy during init */
+ for (i = 0; i < EM_MAX_RETRY; i++) {
+ rc = ahci_transmit_led_message(ap,
+ emp->led_state,
+ 4);
+ if (rc == -EBUSY)
+ msleep(1);
+ else
+ break;
+ }
+ }
+ }
+
+ if (ap->flags & ATA_FLAG_SW_ACTIVITY)
+ ata_for_each_link(link, ap, EDGE)
+ ahci_init_sw_activity(link);
+
+}
+
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
+{
+ int rc;
+
+ /* disable DMA */
+ rc = ahci_stop_engine(ap);
+ if (rc) {
+ *emsg = "failed to stop engine";
+ return rc;
+ }
+
+ /* disable FIS reception */
+ rc = ahci_stop_fis_rx(ap);
+ if (rc) {
+ *emsg = "failed stop FIS RX";
+ return rc;
+ }
+
+ return 0;
+}
+
+int ahci_reset_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 tmp;
+
+ /* we must be in AHCI mode, before using anything
+ * AHCI-specific, such as HOST_RESET.
+ */
+ ahci_enable_ahci(mmio);
+
+ /* global controller reset */
+ if (!ahci_skip_host_reset) {
+ tmp = readl(mmio + HOST_CTL);
+ if ((tmp & HOST_RESET) == 0) {
+ writel(tmp | HOST_RESET, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ /*
+ * to perform host reset, OS should set HOST_RESET
+ * and poll until this bit is read to be "0".
+ * reset must complete within 1 second, or
+ * the hardware should be considered fried.
+ */
+ tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
+ HOST_RESET, 10, 1000);
+
+ if (tmp & HOST_RESET) {
+ dev_printk(KERN_ERR, host->dev,
+ "controller reset failed (0x%x)\n", tmp);
+ return -EIO;
+ }
+
+ /* turn on AHCI mode */
+ ahci_enable_ahci(mmio);
+
+ /* Some registers might be cleared on reset. Restore
+ * initial values.
+ */
+ ahci_restore_initial_config(host);
+ } else
+ dev_printk(KERN_INFO, host->dev,
+ "skipping global host reset\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_reset_controller);
+
+static void ahci_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
+ return;
+
+ emp->activity++;
+ if (!timer_pending(&emp->timer))
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
+}
+
+static void ahci_sw_activity_blink(unsigned long arg)
+{
+ struct ata_link *link = (struct ata_link *)arg;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ unsigned long led_message = emp->led_state;
+ u32 activity_led_state;
+ unsigned long flags;
+
+ led_message &= EM_MSG_LED_VALUE;
+ led_message |= ap->port_no | (link->pmp << 8);
+
+ /* check to see if we've had activity. If so,
+ * toggle state of LED and reset timer. If not,
+ * turn LED to desired idle state.
+ */
+ spin_lock_irqsave(ap->lock, flags);
+ if (emp->saved_activity != emp->activity) {
+ emp->saved_activity = emp->activity;
+ /* get the current LED state */
+ activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
+
+ if (activity_led_state)
+ activity_led_state = 0;
+ else
+ activity_led_state = 1;
+
+ /* clear old state */
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+ /* toggle state */
+ led_message |= (activity_led_state << 16);
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
+ } else {
+ /* switch to idle */
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+ if (emp->blink_policy == BLINK_OFF)
+ led_message |= (1 << 16);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_transmit_led_message(ap, led_message, 4);
+}
+
+static void ahci_init_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* init activity stats, setup timer */
+ emp->saved_activity = emp->activity = 0;
+ setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
+
+ /* check our blink policy and set flag for link if it's enabled */
+ if (emp->blink_policy)
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+}
+
+int ahci_reset_em(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_ctl;
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
+ return -EINVAL;
+
+ writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_reset_em);
+
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_ctl;
+ u32 message[] = {0, 0};
+ unsigned long flags;
+ int pmp;
+ struct ahci_em_priv *emp;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /*
+ * if we are still busy transmitting a previous message,
+ * do not allow
+ */
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (em_ctl & EM_CTL_TM) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return -EBUSY;
+ }
+
+ if (hpriv->em_msg_type & EM_MSG_TYPE_LED) {
+ /*
+ * create message header - this is all zero except for
+ * the message size, which is 4 bytes.
+ */
+ message[0] |= (4 << 8);
+
+ /* ignore 0:4 of byte zero, fill in port info yourself */
+ message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
+
+ /* write message to EM_LOC */
+ writel(message[0], mmio + hpriv->em_loc);
+ writel(message[1], mmio + hpriv->em_loc+4);
+
+ /*
+ * tell hardware to transmit the message
+ */
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+ }
+
+ /* save off new led state for port/slot */
+ emp->led_state = state;
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ return size;
+}
+
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ int rc = 0;
+
+ ata_for_each_link(link, ap, EDGE) {
+ emp = &pp->em_priv[link->pmp];
+ rc += sprintf(buf, "%lx\n", emp->led_state);
+ }
+ return rc;
+}
+
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size)
+{
+ int state;
+ int pmp;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp;
+
+ state = simple_strtoul(buf, NULL, 0);
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ /* mask off the activity bits if we are in sw_activity
+ * mode, user should turn off sw_activity before setting
+ * activity led through em_message
+ */
+ if (emp->blink_policy)
+ state &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+ return ahci_transmit_led_message(ap, state, size);
+}
+
+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ u32 port_led_state = emp->led_state;
+
+ /* save the desired Activity LED behavior */
+ if (val == OFF) {
+ /* clear LFLAG */
+ link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
+
+ /* set the LED to OFF */
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ ahci_transmit_led_message(ap, port_led_state, 4);
+ } else {
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+ if (val == BLINK_OFF) {
+ /* set LED to ON for idle */
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
+ ahci_transmit_led_message(ap, port_led_state, 4);
+ }
+ }
+ emp->blink_policy = val;
+ return 0;
+}
+
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* display the saved value of activity behavior for this
+ * disk.
+ */
+ return sprintf(buf, "%d\n", emp->blink_policy);
+}
+
+static void ahci_port_init(struct device *dev, struct ata_port *ap,
+ int port_no, void __iomem *mmio,
+ void __iomem *port_mmio)
+{
+ const char *emsg = NULL;
+ int rc;
+ u32 tmp;
+
+ /* make sure port is not active */
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc)
+ dev_warn(dev, "%s (%d)\n", emsg, rc);
+
+ /* clear SError */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+ writel(1 << port_no, mmio + HOST_IRQ_STAT);
+}
+
+void ahci_init_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ int i;
+ void __iomem *port_mmio;
+ u32 tmp;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ port_mmio = ahci_port_base(ap);
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ ahci_port_init(host->dev, ap, i, mmio, port_mmio);
+ }
+
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
+}
+EXPORT_SYMBOL_GPL(ahci_init_controller);
+
+static void ahci_dev_config(struct ata_device *dev)
+{
+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
+ dev->max_sectors = 255;
+ ata_dev_printk(dev, KERN_INFO,
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
+ }
+}
+
+static unsigned int ahci_dev_classify(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_taskfile tf;
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_SIG);
+ tf.lbah = (tmp >> 24) & 0xff;
+ tf.lbam = (tmp >> 16) & 0xff;
+ tf.lbal = (tmp >> 8) & 0xff;
+ tf.nsect = (tmp) & 0xff;
+
+ return ata_dev_classify(&tf);
+}
+
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts)
+{
+ dma_addr_t cmd_tbl_dma;
+
+ cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
+
+ pp->cmd_slot[tag].opts = cpu_to_le32(opts);
+ pp->cmd_slot[tag].status = 0;
+ pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
+ pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
+}
+
+int ahci_kick_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 tmp;
+ int busy, rc;
+
+ /* stop engine */
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ goto out_restart;
+
+ /* need to do CLO?
+ * always do CLO if PMP is attached (AHCI-1.3 9.2)
+ */
+ busy = status & (ATA_BUSY | ATA_DRQ);
+ if (!busy && !sata_pmp_attached(ap)) {
+ rc = 0;
+ goto out_restart;
+ }
+
+ if (!(hpriv->cap & HOST_CAP_CLO)) {
+ rc = -EOPNOTSUPP;
+ goto out_restart;
+ }
+
+ /* perform CLO */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_CLO;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ rc = 0;
+ tmp = ata_wait_register(port_mmio + PORT_CMD,
+ PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
+ if (tmp & PORT_CMD_CLO)
+ rc = -EIO;
+
+ /* restart engine */
+ out_restart:
+ ahci_start_engine(ap);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_kick_engine);
+
+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
+ struct ata_taskfile *tf, int is_cmd, u16 flags,
+ unsigned long timeout_msec)
+{
+ const u32 cmd_fis_len = 5; /* five dwords */
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u8 *fis = pp->cmd_tbl;
+ u32 tmp;
+
+ /* prep the command */
+ ata_tf_to_fis(tf, pmp, is_cmd, fis);
+ ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
+
+ /* issue & wait */
+ writel(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (timeout_msec) {
+ tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
+ 1, timeout_msec);
+ if (tmp & 0x1) {
+ ahci_kick_engine(ap);
+ return -EBUSY;
+ }
+ } else
+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
+
+ return 0;
+}
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ const char *reason = NULL;
+ unsigned long now, msecs;
+ struct ata_taskfile tf;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ /* prepare for SRST (AHCI-1.1 10.4.1) */
+ rc = ahci_kick_engine(ap);
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_printk(link, KERN_WARNING,
+ "failed to reset engine (errno=%d)\n", rc);
+
+ ata_tf_init(link->device, &tf);
+
+ /* issue the first D2H Register FIS */
+ msecs = 0;
+ now = jiffies;
+ if (time_after(now, deadline))
+ msecs = jiffies_to_msecs(deadline - now);
+
+ tf.ctl |= ATA_SRST;
+ if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
+ rc = -EIO;
+ reason = "1st FIS failed";
+ goto fail;
+ }
+
+ /* spec says at least 5us, but be generous and sleep for 1ms */
+ msleep(1);
+
+ /* issue the second D2H Register FIS */
+ tf.ctl &= ~ATA_SRST;
+ ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
+
+ /* wait for link to become ready */
+ rc = ata_wait_after_reset(link, deadline, check_ready);
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_printk(link, KERN_INFO,
+ "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
+ reason = "device not ready";
+ goto fail;
+ } else
+ *class = ahci_dev_classify(ap);
+
+ DPRINTK("EXIT, class=%u\n", *class);
+ return 0;
+
+ fail:
+ ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
+ return rc;
+}
+
+int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ return ata_check_ready(status);
+}
+EXPORT_SYMBOL_GPL(ahci_check_ready);
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+
+ DPRINTK("ENTER\n");
+
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+EXPORT_SYMBOL_GPL(ahci_do_softreset);
+
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ bool online;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ rc = sata_link_hardreset(link, timing, deadline, &online,
+ ahci_check_ready);
+
+ ahci_start_engine(ap);
+
+ if (online)
+ *class = ahci_dev_classify(ap);
+
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+ return rc;
+}
+
+static void ahci_postreset(struct ata_link *link, unsigned int *class)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 new_tmp, tmp;
+
+ ata_std_postreset(link, class);
+
+ /* Make sure port's ATAPI bit is set appropriately */
+ new_tmp = tmp = readl(port_mmio + PORT_CMD);
+ if (*class == ATA_DEV_ATAPI)
+ new_tmp |= PORT_CMD_ATAPI;
+ else
+ new_tmp &= ~PORT_CMD_ATAPI;
+ if (new_tmp != tmp) {
+ writel(new_tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ }
+}
+
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
+{
+ struct scatterlist *sg;
+ struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
+ unsigned int si;
+
+ VPRINTK("ENTER\n");
+
+ /*
+ * Next, the S/G list.
+ */
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ dma_addr_t addr = sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
+ ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
+ }
+
+ return si;
+}
+
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ if (!sata_pmp_attached(ap) || pp->fbs_enabled)
+ return ata_std_qc_defer(qc);
+ else
+ return sata_pmp_qc_defer_cmd_switch(qc);
+}
+
+static void ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
+ void *cmd_tbl;
+ u32 opts;
+ const u32 cmd_fis_len = 5; /* five dwords */
+ unsigned int n_elem;
+
+ /*
+ * Fill in command table information. First, the header,
+ * a SATA Register - Host to Device command FIS.
+ */
+ cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
+
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
+ if (is_atapi) {
+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
+ }
+
+ n_elem = 0;
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ n_elem = ahci_fill_sg(qc, cmd_tbl);
+
+ /*
+ * Fill in command slot information.
+ */
+ opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+ if (is_atapi)
+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
+
+ ahci_fill_cmd_slot(pp, qc->tag, opts);
+}
+
+static void ahci_fbs_dec_intr(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ int retries = 3;
+
+ DPRINTK("ENTER\n");
+ BUG_ON(!pp->fbs_enabled);
+
+ /* time to wait for DEC is not specified by AHCI spec,
+ * add a retry loop for safety.
+ */
+ writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ while ((fbs & PORT_FBS_DEC) && retries--) {
+ udelay(1);
+ fbs = readl(port_mmio + PORT_FBS);
+ }
+
+ if (fbs & PORT_FBS_DEC)
+ dev_printk(KERN_ERR, ap->host->dev,
+ "failed to clear device error\n");
+}
+
+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_eh_info *host_ehi = &ap->link.eh_info;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *active_qc;
+ struct ata_eh_info *active_ehi;
+ bool fbs_need_dec = false;
+ u32 serror;
+
+ /* determine active link with error */
+ if (pp->fbs_enabled) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ int pmp = fbs >> PORT_FBS_DWE_OFFSET;
+
+ if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
+ ata_link_online(&ap->pmp_link[pmp])) {
+ link = &ap->pmp_link[pmp];
+ fbs_need_dec = true;
+ }
+
+ } else
+ ata_for_each_link(link, ap, EDGE)
+ if (ata_link_active(link))
+ break;
+
+ if (!link)
+ link = &ap->link;
+
+ active_qc = ata_qc_from_tag(ap, link->active_tag);
+ active_ehi = &link->eh_info;
+
+ /* record irq stat */
+ ata_ehi_clear_desc(host_ehi);
+ ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
+
+ /* AHCI needs SError cleared; otherwise, it might lock up */
+ ahci_scr_read(&ap->link, SCR_ERROR, &serror);
+ ahci_scr_write(&ap->link, SCR_ERROR, serror);
+ host_ehi->serror |= serror;
+
+ /* some controllers set IRQ_IF_ERR on device errors, ignore it */
+ if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
+ irq_stat &= ~PORT_IRQ_IF_ERR;
+
+ if (irq_stat & PORT_IRQ_TF_ERR) {
+ /* If qc is active, charge it; otherwise, the active
+ * link. There's no active qc on NCQ errors. It will
+ * be determined by EH by reading log page 10h.
+ */
+ if (active_qc)
+ active_qc->err_mask |= AC_ERR_DEV;
+ else
+ active_ehi->err_mask |= AC_ERR_DEV;
+
+ if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
+ host_ehi->serror &= ~SERR_INTERNAL;
+ }
+
+ if (irq_stat & PORT_IRQ_UNK_FIS) {
+ u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
+
+ active_ehi->err_mask |= AC_ERR_HSM;
+ active_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(active_ehi,
+ "unknown FIS %08x %08x %08x %08x" ,
+ unk[0], unk[1], unk[2], unk[3]);
+ }
+
+ if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
+ active_ehi->err_mask |= AC_ERR_HSM;
+ active_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(active_ehi, "incorrect PMP");
+ }
+
+ if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
+ host_ehi->err_mask |= AC_ERR_HOST_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(host_ehi, "host bus error");
+ }
+
+ if (irq_stat & PORT_IRQ_IF_ERR) {
+ if (fbs_need_dec)
+ active_ehi->err_mask |= AC_ERR_DEV;
+ else {
+ host_ehi->err_mask |= AC_ERR_ATA_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ }
+
+ ata_ehi_push_desc(host_ehi, "interface fatal error");
+ }
+
+ if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
+ ata_ehi_hotplugged(host_ehi);
+ ata_ehi_push_desc(host_ehi, "%s",
+ irq_stat & PORT_IRQ_CONNECT ?
+ "connection status changed" : "PHY RDY changed");
+ }
+
+ /* okay, let's hand over to EH */
+
+ if (irq_stat & PORT_IRQ_FREEZE)
+ ata_port_freeze(ap);
+ else if (fbs_need_dec) {
+ ata_link_abort(link);
+ ahci_fbs_dec_intr(ap);
+ } else
+ ata_port_abort(ap);
+}
+
+static void ahci_port_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
+ u32 status, qc_active = 0;
+ int rc;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ /* ignore BAD_PMP while resetting */
+ if (unlikely(resetting))
+ status &= ~PORT_IRQ_BAD_PMP;
+
+ /* If we are getting PhyRdy, this is
+ * just a power state change, we should
+ * clear out this, plus the PhyRdy/Comm
+ * Wake bits from Serror
+ */
+ if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
+ (status & PORT_IRQ_PHYRDY)) {
+ status &= ~PORT_IRQ_PHYRDY;
+ ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+ }
+
+ if (unlikely(status & PORT_IRQ_ERROR)) {
+ ahci_error_intr(ap, status);
+ return;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS) {
+ /* If SNotification is available, leave notification
+ * handling to sata_async_notification(). If not,
+ * emulate it by snooping SDB FIS RX area.
+ *
+ * Snooping FIS RX area is probably cheaper than
+ * poking SNotification but some constrollers which
+ * implement SNotification, ICH9 for example, don't
+ * store AN SDB FIS into receive area.
+ */
+ if (hpriv->cap & HOST_CAP_SNTF)
+ sata_async_notification(ap);
+ else {
+ /* If the 'N' bit in word 0 of the FIS is set,
+ * we just received asynchronous notification.
+ * Tell libata about it.
+ *
+ * Lack of SNotification should not appear in
+ * ahci 1.2, so the workaround is unnecessary
+ * when FBS is enabled.
+ */
+ if (pp->fbs_enabled)
+ WARN_ON_ONCE(1);
+ else {
+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
+ u32 f0 = le32_to_cpu(f[0]);
+ if (f0 & (1 << 15))
+ sata_async_notification(ap);
+ }
+ }
+ }
+
+ /* pp->active_link is not reliable once FBS is enabled, both
+ * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
+ * NCQ and non-NCQ commands may be in flight at the same time.
+ */
+ if (pp->fbs_enabled) {
+ if (ap->qc_active) {
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
+ }
+ } else {
+ /* pp->active_link is valid iff any command is in flight */
+ if (ap->qc_active && pp->active_link->sactive)
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ else
+ qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+ }
+
+
+ rc = ata_qc_complete_multiple(ap, qc_active);
+
+ /* while resetting, invalid completions are expected */
+ if (unlikely(rc < 0 && !resetting)) {
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_freeze(ap);
+ }
+}
+
+irqreturn_t ahci_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct ahci_host_priv *hpriv;
+ unsigned int i, handled = 0;
+ void __iomem *mmio;
+ u32 irq_stat, irq_masked;
+
+ VPRINTK("ENTER\n");
+
+ hpriv = host->private_data;
+ mmio = hpriv->mmio;
+
+ /* sigh. 0xffffffff is a valid return from h/w */
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ irq_masked = irq_stat & hpriv->port_map;
+
+ spin_lock(&host->lock);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ if (!(irq_masked & (1 << i)))
+ continue;
+
+ ap = host->ports[i];
+ if (ap) {
+ ahci_port_intr(ap);
+ VPRINTK("port %u\n", i);
+ } else {
+ VPRINTK("port %u (no irq)\n", i);
+ if (ata_ratelimit())
+ dev_printk(KERN_WARNING, host->dev,
+ "interrupt on disabled port %u\n", i);
+ }
+
+ handled = 1;
+ }
+
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
+ * it should be cleared after all the port events are cleared;
+ * otherwise, it will raise a spurious interrupt after each
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
+ * information.
+ *
+ * Also, use the unmasked value to clear interrupt as spurious
+ * pending event on a dummy port might cause screaming IRQ.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
+ spin_unlock(&host->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+EXPORT_SYMBOL_GPL(ahci_interrupt);
+
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* Keep track of the currently active link. It will be used
+ * in completion path to determine whether NCQ phase is in
+ * progress.
+ */
+ pp->active_link = qc->dev->link;
+
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
+
+ if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
+ fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+ writel(fbs, port_mmio + PORT_FBS);
+ pp->fbs_last_dev = qc->dev->link->pmp;
+ }
+
+ writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
+
+ ahci_sw_activity(qc->dev->link);
+
+ return 0;
+}
+
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+
+ if (pp->fbs_enabled)
+ d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
+
+ ata_tf_from_fis(d2h_fis, &qc->result_tf);
+ return true;
+}
+
+static void ahci_freeze(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+
+ /* turn IRQ off */
+ writel(0, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_thaw(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* clear IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
+
+ /* turn IRQ back on */
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_error_handler(struct ata_port *ap)
+{
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+ /* restart engine */
+ ahci_stop_engine(ap);
+ ahci_start_engine(ap);
+ }
+
+ sata_pmp_error_handler(ap);
+}
+
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ ahci_kick_engine(ap);
+}
+
+static void ahci_enable_fbs(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+ int rc;
+
+ if (!pp->fbs_supported)
+ return;
+
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN) {
+ pp->fbs_enabled = true;
+ pp->fbs_last_dev = -1; /* initialization */
+ return;
+ }
+
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ return;
+
+ writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN) {
+ dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
+ pp->fbs_enabled = true;
+ pp->fbs_last_dev = -1; /* initialization */
+ } else
+ dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
+
+ ahci_start_engine(ap);
+}
+
+static void ahci_disable_fbs(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+ int rc;
+
+ if (!pp->fbs_supported)
+ return;
+
+ fbs = readl(port_mmio + PORT_FBS);
+ if ((fbs & PORT_FBS_EN) == 0) {
+ pp->fbs_enabled = false;
+ return;
+ }
+
+ rc = ahci_stop_engine(ap);
+ if (rc)
+ return;
+
+ writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN)
+ dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
+ else {
+ dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
+ pp->fbs_enabled = false;
+ }
+
+ ahci_start_engine(ap);
+}
+
+static void ahci_pmp_attach(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_PMP;
+ writel(cmd, port_mmio + PORT_CMD);
+
+ ahci_enable_fbs(ap);
+
+ pp->intr_mask |= PORT_IRQ_BAD_PMP;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_pmp_detach(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 cmd;
+
+ ahci_disable_fbs(ap);
+
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd &= ~PORT_CMD_PMP;
+ writel(cmd, port_mmio + PORT_CMD);
+
+ pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static int ahci_port_resume(struct ata_port *ap)
+{
+ ahci_power_up(ap);
+ ahci_start_port(ap);
+
+ if (sata_pmp_attached(ap))
+ ahci_pmp_attach(ap);
+ else
+ ahci_pmp_detach(ap);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
+{
+ const char *emsg = NULL;
+ int rc;
+
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc == 0)
+ ahci_power_down(ap);
+ else {
+ ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
+ ahci_start_port(ap);
+ }
+
+ return rc;
+}
+#endif
+
+static int ahci_port_start(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct device *dev = ap->host->dev;
+ struct ahci_port_priv *pp;
+ void *mem;
+ dma_addr_t mem_dma;
+ size_t dma_sz, rx_fis_sz;
+
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ /* check FBS capability */
+ if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd = readl(port_mmio + PORT_CMD);
+ if (cmd & PORT_CMD_FBSCP)
+ pp->fbs_supported = true;
+ else
+ dev_printk(KERN_WARNING, dev,
+ "The port is not capable of FBS\n");
+ }
+
+ if (pp->fbs_supported) {
+ dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
+ rx_fis_sz = AHCI_RX_FIS_SZ * 16;
+ } else {
+ dma_sz = AHCI_PORT_PRIV_DMA_SZ;
+ rx_fis_sz = AHCI_RX_FIS_SZ;
+ }
+
+ mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
+ if (!mem)
+ return -ENOMEM;
+ memset(mem, 0, dma_sz);
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot = mem;
+ pp->cmd_slot_dma = mem_dma;
+
+ mem += AHCI_CMD_SLOT_SZ;
+ mem_dma += AHCI_CMD_SLOT_SZ;
+
+ /*
+ * Second item: Received-FIS area
+ */
+ pp->rx_fis = mem;
+ pp->rx_fis_dma = mem_dma;
+
+ mem += rx_fis_sz;
+ mem_dma += rx_fis_sz;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = mem;
+ pp->cmd_tbl_dma = mem_dma;
+
+ /*
+ * Save off initial list of interrupts to be enabled.
+ * This could be changed later
+ */
+ pp->intr_mask = DEF_PORT_IRQ;
+
+ ap->private_data = pp;
+
+ /* engage engines, captain */
+ return ahci_port_resume(ap);
+}
+
+static void ahci_port_stop(struct ata_port *ap)
+{
+ const char *emsg = NULL;
+ int rc;
+
+ /* de-initialize port */
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc)
+ ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
+}
+
+void ahci_print_info(struct ata_host *host, const char *scc_s)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 vers, cap, cap2, impl, speed;
+ const char *speed_s;
+
+ vers = readl(mmio + HOST_VERSION);
+ cap = hpriv->cap;
+ cap2 = hpriv->cap2;
+ impl = hpriv->port_map;
+
+ speed = (cap >> 20) & 0xf;
+ if (speed == 1)
+ speed_s = "1.5";
+ else if (speed == 2)
+ speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
+ else
+ speed_s = "?";
+
+ dev_info(host->dev,
+ "AHCI %02x%02x.%02x%02x "
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
+ ,
+
+ (vers >> 24) & 0xff,
+ (vers >> 16) & 0xff,
+ (vers >> 8) & 0xff,
+ vers & 0xff,
+
+ ((cap >> 8) & 0x1f) + 1,
+ (cap & 0x1f) + 1,
+ speed_s,
+ impl,
+ scc_s);
+
+ dev_info(host->dev,
+ "flags: "
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s\n"
+ ,
+
+ cap & HOST_CAP_64 ? "64bit " : "",
+ cap & HOST_CAP_NCQ ? "ncq " : "",
+ cap & HOST_CAP_SNTF ? "sntf " : "",
+ cap & HOST_CAP_MPS ? "ilck " : "",
+ cap & HOST_CAP_SSS ? "stag " : "",
+ cap & HOST_CAP_ALPM ? "pm " : "",
+ cap & HOST_CAP_LED ? "led " : "",
+ cap & HOST_CAP_CLO ? "clo " : "",
+ cap & HOST_CAP_ONLY ? "only " : "",
+ cap & HOST_CAP_PMP ? "pmp " : "",
+ cap & HOST_CAP_FBS ? "fbs " : "",
+ cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+ cap & HOST_CAP_SSC ? "slum " : "",
+ cap & HOST_CAP_PART ? "part " : "",
+ cap & HOST_CAP_CCC ? "ccc " : "",
+ cap & HOST_CAP_EMS ? "ems " : "",
+ cap & HOST_CAP_SXS ? "sxs " : "",
+ cap2 & HOST_CAP2_APST ? "apst " : "",
+ cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+ cap2 & HOST_CAP2_BOH ? "boh " : ""
+ );
+}
+EXPORT_SYMBOL_GPL(ahci_print_info);
+
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi)
+{
+ u8 messages;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_loc = readl(mmio + HOST_EM_LOC);
+ u32 em_ctl = readl(mmio + HOST_EM_CTL);
+
+ if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS))
+ return;
+
+ messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
+
+ if (messages) {
+ /* store em_loc */
+ hpriv->em_loc = ((em_loc >> 16) * 4);
+ hpriv->em_buf_sz = ((em_loc & 0xff) * 4);
+ hpriv->em_msg_type = messages;
+ pi->flags |= ATA_FLAG_EM;
+ if (!(em_ctl & EM_CTL_ALHD))
+ pi->flags |= ATA_FLAG_SW_ACTIVITY;
+ }
+}
+EXPORT_SYMBOL_GPL(ahci_set_em_messages);
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("Common AHCI SATA low-level routines");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 49cffb6..c47373f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -65,6 +65,7 @@
#include <linux/libata.h>
#include <asm/byteorder.h>
#include <linux/cdrom.h>
+#include <linux/ratelimit.h>
#include "libata.h"
@@ -96,7 +97,6 @@ static void ata_dev_xfermask(struct ata_device *dev);
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
unsigned int ata_print_id = 1;
-static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
@@ -1685,52 +1685,6 @@ unsigned long ata_id_xfermask(const u16 *id)
return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
}
-/**
- * ata_pio_queue_task - Queue port_task
- * @ap: The ata_port to queue port_task for
- * @data: data for @fn to use
- * @delay: delay time in msecs for workqueue function
- *
- * Schedule @fn(@data) for execution after @delay jiffies using
- * port_task. There is one port_task per port and it's the
- * user(low level driver)'s responsibility to make sure that only
- * one task is active at any given time.
- *
- * libata core layer takes care of synchronization between
- * port_task and EH. ata_pio_queue_task() may be ignored for EH
- * synchronization.
- *
- * LOCKING:
- * Inherited from caller.
- */
-void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
-{
- ap->port_task_data = data;
-
- /* may fail if ata_port_flush_task() in progress */
- queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
-}
-
-/**
- * ata_port_flush_task - Flush port_task
- * @ap: The ata_port to flush port_task for
- *
- * After this function completes, port_task is guranteed not to
- * be running or scheduled.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_port_flush_task(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- cancel_rearming_delayed_work(&ap->port_task);
-
- if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
-}
-
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
{
struct completion *waiting = qc->private_data;
@@ -1852,7 +1806,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
- ata_port_flush_task(ap);
+ ata_sff_flush_pio_task(ap);
if (!rc) {
spin_lock_irqsave(ap->lock, flags);
@@ -1906,22 +1860,6 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
ap->qc_active = preempted_qc_active;
ap->nr_active_links = preempted_nr_active_links;
- /* XXX - Some LLDDs (sata_mv) disable port on command failure.
- * Until those drivers are fixed, we detect the condition
- * here, fail the command with AC_ERR_SYSTEM and reenable the
- * port.
- *
- * Note that this doesn't change any behavior as internal
- * command failure results in disabling the device in the
- * higher layer for LLDDs without new reset/EH callbacks.
- *
- * Kill the following code as soon as those drivers are fixed.
- */
- if (ap->flags & ATA_FLAG_DISABLED) {
- err_mask |= AC_ERR_SYSTEM;
- ata_port_probe(ap);
- }
-
spin_unlock_irqrestore(ap->lock, flags);
if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
@@ -2767,8 +2705,6 @@ int ata_bus_probe(struct ata_port *ap)
int rc;
struct ata_device *dev;
- ata_port_probe(ap);
-
ata_for_each_dev(dev, &ap->link, ALL)
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
@@ -2796,8 +2732,7 @@ int ata_bus_probe(struct ata_port *ap)
ap->ops->phy_reset(ap);
ata_for_each_dev(dev, &ap->link, ALL) {
- if (!(ap->flags & ATA_FLAG_DISABLED) &&
- dev->class != ATA_DEV_UNKNOWN)
+ if (dev->class != ATA_DEV_UNKNOWN)
classes[dev->devno] = dev->class;
else
classes[dev->devno] = ATA_DEV_NONE;
@@ -2805,8 +2740,6 @@ int ata_bus_probe(struct ata_port *ap)
dev->class = ATA_DEV_UNKNOWN;
}
- ata_port_probe(ap);
-
/* read IDENTIFY page and configure devices. We have to do the identify
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
@@ -2856,8 +2789,6 @@ int ata_bus_probe(struct ata_port *ap)
ata_for_each_dev(dev, &ap->link, ENABLED)
return 0;
- /* no device present, disable port */
- ata_port_disable(ap);
return -ENODEV;
fail:
@@ -2889,22 +2820,6 @@ int ata_bus_probe(struct ata_port *ap)
}
/**
- * ata_port_probe - Mark port as enabled
- * @ap: Port for which we indicate enablement
- *
- * Modify @ap data structure such that the system
- * thinks that the entire port is enabled.
- *
- * LOCKING: host lock, or some other form of
- * serialization.
- */
-
-void ata_port_probe(struct ata_port *ap)
-{
- ap->flags &= ~ATA_FLAG_DISABLED;
-}
-
-/**
* sata_print_link_status - Print SATA link status
* @link: SATA link to printk link status about
*
@@ -2951,26 +2866,6 @@ struct ata_device *ata_dev_pair(struct ata_device *adev)
}
/**
- * ata_port_disable - Disable port.
- * @ap: Port to be disabled.
- *
- * Modify @ap data structure such that the system
- * thinks that the entire port is disabled, and should
- * never attempt to probe or communicate with devices
- * on this port.
- *
- * LOCKING: host lock, or some other form of
- * serialization.
- */
-
-void ata_port_disable(struct ata_port *ap)
-{
- ap->link.device[0].class = ATA_DEV_NONE;
- ap->link.device[1].class = ATA_DEV_NONE;
- ap->flags |= ATA_FLAG_DISABLED;
-}
-
-/**
* sata_down_spd_limit - adjust SATA spd limit downward
* @link: Link to adjust SATA spd limit for
* @spd_limit: Additional limit
@@ -3631,9 +3526,15 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
unsigned long start = jiffies;
- unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
+ unsigned long nodev_deadline;
int warned = 0;
+ /* choose which 0xff timeout to use, read comment in libata.h */
+ if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN)
+ nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG);
+ else
+ nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
+
/* Slave readiness can't be tested separately from master. On
* M/S emulation configuration, this function should be called
* only on the master and it will handle both master and slave.
@@ -3651,12 +3552,12 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
if (ready > 0)
return 0;
- /* -ENODEV could be transient. Ignore -ENODEV if link
+ /*
+ * -ENODEV could be transient. Ignore -ENODEV if link
* is online. Also, some SATA devices take a long
- * time to clear 0xff after reset. For example,
- * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
- * GoVault needs even more than that. Wait for
- * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+ * time to clear 0xff after reset. Wait for
+ * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't
+ * offline.
*
* Note that some PATA controllers (pata_ali) explode
* if status register is read more than once when
@@ -5558,30 +5459,6 @@ void ata_host_resume(struct ata_host *host)
#endif
/**
- * ata_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_port_start(struct ata_port *ap)
-{
- struct device *dev = ap->dev;
-
- ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
- GFP_KERNEL);
- if (!ap->prd)
- return -ENOMEM;
-
- return 0;
-}
-
-/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
*
@@ -5709,12 +5586,9 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
ap->pflags |= ATA_PFLAG_INITIALIZING;
ap->lock = &host->lock;
- ap->flags = ATA_FLAG_DISABLED;
ap->print_id = -1;
- ap->ctl = ATA_DEVCTL_OBS;
ap->host = host;
ap->dev = host->dev;
- ap->last_ctl = 0xFF;
#if defined(ATA_VERBOSE_DEBUG)
/* turn on all debugging levels */
@@ -5725,11 +5599,6 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
#endif
-#ifdef CONFIG_ATA_SFF
- INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
-#else
- INIT_DELAYED_WORK(&ap->port_task, NULL);
-#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
@@ -5747,6 +5616,8 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
+ ata_sff_port_init(ap);
+
return ap;
}
@@ -6138,8 +6009,6 @@ static void async_port_probe(void *data, async_cookie_t cookie)
struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
- ata_port_probe(ap);
-
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
@@ -6663,62 +6532,43 @@ static void __init ata_parse_force_param(void)
static int __init ata_init(void)
{
- ata_parse_force_param();
+ int rc = -ENOMEM;
- /*
- * FIXME: In UP case, there is only one workqueue thread and if you
- * have more than one PIO device, latency is bloody awful, with
- * occasional multi-second "hiccups" as one PIO device waits for
- * another. It's an ugly wart that users DO occasionally complain
- * about; luckily most users have at most one PIO polled device.
- */
- ata_wq = create_workqueue("ata");
- if (!ata_wq)
- goto free_force_tbl;
+ ata_parse_force_param();
ata_aux_wq = create_singlethread_workqueue("ata_aux");
if (!ata_aux_wq)
- goto free_wq;
+ goto fail;
+
+ rc = ata_sff_init();
+ if (rc)
+ goto fail;
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
return 0;
-free_wq:
- destroy_workqueue(ata_wq);
-free_force_tbl:
+fail:
kfree(ata_force_tbl);
- return -ENOMEM;
+ if (ata_aux_wq)
+ destroy_workqueue(ata_aux_wq);
+ return rc;
}
static void __exit ata_exit(void)
{
+ ata_sff_exit();
kfree(ata_force_tbl);
- destroy_workqueue(ata_wq);
destroy_workqueue(ata_aux_wq);
}
subsys_initcall(ata_init);
module_exit(ata_exit);
-static unsigned long ratelimit_time;
-static DEFINE_SPINLOCK(ata_ratelimit_lock);
+static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1);
int ata_ratelimit(void)
{
- int rc;
- unsigned long flags;
-
- spin_lock_irqsave(&ata_ratelimit_lock, flags);
-
- if (time_after(jiffies, ratelimit_time)) {
- rc = 1;
- ratelimit_time = jiffies + (HZ/5);
- } else
- rc = 0;
-
- spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
-
- return rc;
+ return __ratelimit(&ratelimit);
}
/**
@@ -6826,11 +6676,9 @@ EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_do_set_mode);
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_port_probe);
EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
@@ -6842,7 +6690,6 @@ EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
-EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
@@ -6864,7 +6711,6 @@ EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_pio_queue_task);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
EXPORT_SYMBOL_GPL(ata_timing_compute);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 228740f..f77a673 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -550,8 +550,8 @@ void ata_scsi_error(struct Scsi_Host *host)
DPRINTK("ENTER\n");
- /* synchronize with port task */
- ata_port_flush_task(ap);
+ /* make sure sff pio task is not running */
+ ata_sff_flush_pio_task(ap);
/* synchronize with host lock and sort out timeouts */
@@ -3684,7 +3684,7 @@ void ata_std_error_handler(struct ata_port *ap)
ata_reset_fn_t hardreset = ops->hardreset;
/* ignore built-in hardreset if SCR access is not available */
- if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
+ if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 00305f4..224faab 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -231,10 +231,14 @@ static const char *sata_pmp_spec_rev_str(const u32 *gscr)
return "<unknown>";
}
+#define PMP_GSCR_SII_POL 129
+
static int sata_pmp_configure(struct ata_device *dev, int print_info)
{
struct ata_port *ap = dev->link->ap;
u32 *gscr = dev->gscr;
+ u16 vendor = sata_pmp_gscr_vendor(gscr);
+ u16 devid = sata_pmp_gscr_devid(gscr);
unsigned int err_mask = 0;
const char *reason;
int nr_ports, rc;
@@ -260,12 +264,34 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
goto fail;
}
+ /* Disable sending Early R_OK.
+ * With "cached read" HDD testing and multiple ports busy on a SATA
+ * host controller, 3726 PMP will very rarely drop a deferred
+ * R_OK that was intended for the host. Symptom will be all
+ * 5 drives under test will timeout, get reset, and recover.
+ */
+ if (vendor == 0x1095 && devid == 0x3726) {
+ u32 reg;
+
+ err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, ®);
+ if (err_mask) {
+ rc = -EIO;
+ reason = "failed to read Sil3726 Private Register";
+ goto fail;
+ }
+ reg &= ~0x1;
+ err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
+ if (err_mask) {
+ rc = -EIO;
+ reason = "failed to write Sil3726 Private Register";
+ goto fail;
+ }
+ }
+
if (print_info) {
ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, "
"0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
- sata_pmp_spec_rev_str(gscr),
- sata_pmp_gscr_vendor(gscr),
- sata_pmp_gscr_devid(gscr),
+ sata_pmp_spec_rev_str(gscr), vendor, devid,
sata_pmp_gscr_rev(gscr),
nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN],
gscr[SATA_PMP_GSCR_FEAT]);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0088cde..cfa9dd3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3345,9 +3345,6 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
struct ata_link *link;
struct ata_device *dev;
- if (ap->flags & ATA_FLAG_DISABLED)
- return;
-
repeat:
ata_for_each_link(link, ap, EDGE) {
ata_for_each_dev(dev, link, ENABLED) {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index e3877b6..19ddf92 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -40,10 +40,12 @@
#include "libata.h"
+static struct workqueue_struct *ata_sff_wq;
+
const struct ata_port_operations ata_sff_port_ops = {
.inherits = &ata_base_port_ops,
- .qc_prep = ata_sff_qc_prep,
+ .qc_prep = ata_noop_qc_prep,
.qc_issue = ata_sff_qc_issue,
.qc_fill_rtf = ata_sff_qc_fill_rtf,
@@ -53,9 +55,7 @@ const struct ata_port_operations ata_sff_port_ops = {
.softreset = ata_sff_softreset,
.hardreset = sata_sff_hardreset,
.postreset = ata_sff_postreset,
- .drain_fifo = ata_sff_drain_fifo,
.error_handler = ata_sff_error_handler,
- .post_internal_cmd = ata_sff_post_internal_cmd,
.sff_dev_select = ata_sff_dev_select,
.sff_check_status = ata_sff_check_status,
@@ -63,178 +63,13 @@ const struct ata_port_operations ata_sff_port_ops = {
.sff_tf_read = ata_sff_tf_read,
.sff_exec_command = ata_sff_exec_command,
.sff_data_xfer = ata_sff_data_xfer,
- .sff_irq_on = ata_sff_irq_on,
.sff_irq_clear = ata_sff_irq_clear,
+ .sff_drain_fifo = ata_sff_drain_fifo,
.lost_interrupt = ata_sff_lost_interrupt,
-
- .port_start = ata_sff_port_start,
};
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
-const struct ata_port_operations ata_bmdma_port_ops = {
- .inherits = &ata_sff_port_ops,
-
- .mode_filter = ata_bmdma_mode_filter,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-};
-EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
-
-const struct ata_port_operations ata_bmdma32_port_ops = {
- .inherits = &ata_bmdma_port_ops,
-
- .sff_data_xfer = ata_sff_data_xfer32,
- .port_start = ata_sff_port_start32,
-};
-EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
-
-/**
- * ata_fill_sg - Fill PCI IDE PRD table
- * @qc: Metadata associated with taskfile to be transferred
- *
- * Fill PCI IDE PRD (scatter-gather) table with segments
- * associated with the current disk command.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si, pi;
-
- pi = 0;
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- u32 addr, offset;
- u32 sg_len, len;
-
- /* determine if physical DMA addr spans 64K boundary.
- * Note h/w doesn't support 64-bit, so we unconditionally
- * truncate dma_addr_t to u32.
- */
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- while (sg_len) {
- offset = addr & 0xffff;
- len = sg_len;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- ap->prd[pi].addr = cpu_to_le32(addr);
- ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
- pi++;
- sg_len -= len;
- addr += len;
- }
- }
-
- ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- * ata_fill_sg_dumb - Fill PCI IDE PRD table
- * @qc: Metadata associated with taskfile to be transferred
- *
- * Fill PCI IDE PRD (scatter-gather) table with segments
- * associated with the current disk command. Perform the fill
- * so that we avoid writing any length 64K records for
- * controllers that don't follow the spec.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si, pi;
-
- pi = 0;
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- u32 addr, offset;
- u32 sg_len, len, blen;
-
- /* determine if physical DMA addr spans 64K boundary.
- * Note h/w doesn't support 64-bit, so we unconditionally
- * truncate dma_addr_t to u32.
- */
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- while (sg_len) {
- offset = addr & 0xffff;
- len = sg_len;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- blen = len & 0xffff;
- ap->prd[pi].addr = cpu_to_le32(addr);
- if (blen == 0) {
- /* Some PATA chipsets like the CS5530 can't
- cope with 0x0000 meaning 64K as the spec
- says */
- ap->prd[pi].flags_len = cpu_to_le32(0x8000);
- blen = 0x8000;
- ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
- }
- ap->prd[pi].flags_len = cpu_to_le32(blen);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
- pi++;
- sg_len -= len;
- addr += len;
- }
- }
-
- ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- * ata_sff_qc_prep - Prepare taskfile for submission
- * @qc: Metadata associated with taskfile to be prepared
- *
- * Prepare ATA taskfile for submission.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_qc_prep(struct ata_queued_cmd *qc)
-{
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
-
- ata_fill_sg(qc);
-}
-EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
-
-/**
- * ata_sff_dumb_qc_prep - Prepare taskfile for submission
- * @qc: Metadata associated with taskfile to be prepared
- *
- * Prepare ATA taskfile for submission.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
-{
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
-
- ata_fill_sg_dumb(qc);
-}
-EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
-
/**
* ata_sff_check_status - Read device status reg & clear interrupt
* @ap: port where the device is
@@ -446,6 +281,27 @@ int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
/**
+ * ata_sff_set_devctl - Write device control reg
+ * @ap: port where the device is
+ * @ctl: value to write
+ *
+ * Writes ATA taskfile device control register.
+ *
+ * Note: may NOT be used as the sff_set_devctl() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void ata_sff_set_devctl(struct ata_port *ap, u8 ctl)
+{
+ if (ap->ops->sff_set_devctl)
+ ap->ops->sff_set_devctl(ap, ctl);
+ else
+ iowrite8(ctl, ap->ioaddr.ctl_addr);
+}
+
+/**
* ata_sff_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
@@ -491,7 +347,7 @@ EXPORT_SYMBOL_GPL(ata_sff_dev_select);
* LOCKING:
* caller.
*/
-void ata_dev_select(struct ata_port *ap, unsigned int device,
+static void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep)
{
if (ata_msg_probe(ap))
@@ -517,24 +373,29 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
* Enable interrupts on a legacy IDE device using MMIO or PIO,
* wait for idle, clear any pending interrupts.
*
+ * Note: may NOT be used as the sff_irq_on() entry in
+ * ata_port_operations.
+ *
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_irq_on(struct ata_port *ap)
+void ata_sff_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 tmp;
+
+ if (ap->ops->sff_irq_on) {
+ ap->ops->sff_irq_on(ap);
+ return;
+ }
ap->ctl &= ~ATA_NIEN;
ap->last_ctl = ap->ctl;
- if (ioaddr->ctl_addr)
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- tmp = ata_wait_idle(ap);
+ if (ap->ops->sff_set_devctl || ioaddr->ctl_addr)
+ ata_sff_set_devctl(ap, ap->ctl);
+ ata_wait_idle(ap);
ap->ops->sff_irq_clear(ap);
-
- return tmp;
}
EXPORT_SYMBOL_GPL(ata_sff_irq_on);
@@ -579,7 +440,6 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
if (ioaddr->ctl_addr)
iowrite8(tf->ctl, ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
@@ -615,8 +475,6 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
iowrite8(tf->device, ioaddr->device_addr);
VPRINTK("device 0x%X\n", tf->device);
}
-
- ata_wait_idle(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_tf_load);
@@ -894,7 +752,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
do_write);
}
- if (!do_write)
+ if (!do_write && !PageSlab(page))
flush_dcache_page(page);
qc->curbytes += qc->sect_size;
@@ -1165,7 +1023,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
qc = ata_qc_from_tag(ap, qc->tag);
if (qc) {
if (likely(!(qc->err_mask & AC_ERR_HSM))) {
- ap->ops->sff_irq_on(ap);
+ ata_sff_irq_on(ap);
ata_qc_complete(qc);
} else
ata_port_freeze(ap);
@@ -1181,7 +1039,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
} else {
if (in_wq) {
spin_lock_irqsave(ap->lock, flags);
- ap->ops->sff_irq_on(ap);
+ ata_sff_irq_on(ap);
ata_qc_complete(qc);
spin_unlock_irqrestore(ap->lock, flags);
} else
@@ -1293,7 +1151,7 @@ fsm_start:
if (in_wq)
spin_unlock_irqrestore(ap->lock, flags);
- /* if polling, ata_pio_task() handles the rest.
+ /* if polling, ata_sff_pio_task() handles the rest.
* otherwise, interrupt handler takes over from here.
*/
break;
@@ -1458,14 +1316,38 @@ fsm_start:
}
EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
-void ata_pio_task(struct work_struct *work)
+void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay)
+{
+ /* may fail if ata_sff_flush_pio_task() in progress */
+ queue_delayed_work(ata_sff_wq, &ap->sff_pio_task,
+ msecs_to_jiffies(delay));
+}
+EXPORT_SYMBOL_GPL(ata_sff_queue_pio_task);
+
+void ata_sff_flush_pio_task(struct ata_port *ap)
+{
+ DPRINTK("ENTER\n");
+
+ cancel_rearming_delayed_work(&ap->sff_pio_task);
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (ata_msg_ctl(ap))
+ ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
+}
+
+static void ata_sff_pio_task(struct work_struct *work)
{
struct ata_port *ap =
- container_of(work, struct ata_port, port_task.work);
- struct ata_queued_cmd *qc = ap->port_task_data;
+ container_of(work, struct ata_port, sff_pio_task.work);
+ struct ata_queued_cmd *qc;
u8 status;
int poll_next;
+ /* qc can be NULL if timeout occurred */
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (!qc)
+ return;
+
fsm_start:
WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE);
@@ -1481,7 +1363,7 @@ fsm_start:
msleep(2);
status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
+ ata_sff_queue_pio_task(ap, ATA_SHORT_PAUSE);
return;
}
}
@@ -1497,15 +1379,11 @@ fsm_start:
}
/**
- * ata_sff_qc_issue - issue taskfile to device in proto-dependent manner
+ * ata_sff_qc_issue - issue taskfile to a SFF controller
* @qc: command to issue to device
*
- * Using various libata functions and hooks, this function
- * starts an ATA command. ATA commands are grouped into
- * classes called "protocols", and issuing each type of protocol
- * is slightly different.
- *
- * May be used as the qc_issue() entry in ata_port_operations.
+ * This function issues a PIO or NODATA command to a SFF
+ * controller.
*
* LOCKING:
* spin_lock_irqsave(host lock)
@@ -1520,23 +1398,8 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
/* Use polling pio if the LLD doesn't handle
* interrupt driven pio and atapi CDB interrupt.
*/
- if (ap->flags & ATA_FLAG_PIO_POLLING) {
- switch (qc->tf.protocol) {
- case ATA_PROT_PIO:
- case ATA_PROT_NODATA:
- case ATAPI_PROT_PIO:
- case ATAPI_PROT_NODATA:
- qc->tf.flags |= ATA_TFLAG_POLLING;
- break;
- case ATAPI_PROT_DMA:
- if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
- /* see ata_dma_blacklisted() */
- BUG();
- break;
- default:
- break;
- }
- }
+ if (ap->flags & ATA_FLAG_PIO_POLLING)
+ qc->tf.flags |= ATA_TFLAG_POLLING;
/* select the device */
ata_dev_select(ap, qc->dev->devno, 1, 0);
@@ -1551,17 +1414,8 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
ap->hsm_task_state = HSM_ST_LAST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
-
- break;
-
- case ATA_PROT_DMA:
- WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
+ ata_sff_queue_pio_task(ap, 0);
- ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->bmdma_setup(qc); /* set up bmdma */
- ap->ops->bmdma_start(qc); /* initiate bmdma */
- ap->hsm_task_state = HSM_ST_LAST;
break;
case ATA_PROT_PIO:
@@ -1573,20 +1427,21 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
ap->hsm_task_state = HSM_ST_FIRST;
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
- /* always send first data block using
- * the ata_pio_task() codepath.
+ /* always send first data block using the
+ * ata_sff_pio_task() codepath.
*/
} else {
/* PIO data in protocol */
ap->hsm_task_state = HSM_ST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
- /* if polling, ata_pio_task() handles the rest.
- * otherwise, interrupt handler takes over from here.
+ /* if polling, ata_sff_pio_task() handles the
+ * rest. otherwise, interrupt handler takes
+ * over from here.
*/
}
@@ -1604,19 +1459,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
/* send cdb by polling if no cdb interrupt */
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
(qc->tf.flags & ATA_TFLAG_POLLING))
- ata_pio_queue_task(ap, qc, 0);
- break;
-
- case ATAPI_PROT_DMA:
- WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
-
- ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->bmdma_setup(qc); /* set up bmdma */
- ap->hsm_task_state = HSM_ST_FIRST;
-
- /* send cdb by polling if no cdb interrupt */
- if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
break;
default:
@@ -1728,7 +1571,7 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,
goto idle_irq;
}
- /* ack bmdma irq events */
+ /* clear irq events */
ap->ops->sff_irq_clear(ap);
ata_sff_hsm_move(ap, qc, status, 0);
@@ -1785,9 +1628,6 @@ retry:
struct ata_port *ap = host->ports[i];
struct ata_queued_cmd *qc;
- if (unlikely(ap->flags & ATA_FLAG_DISABLED))
- continue;
-
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc) {
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
@@ -1862,11 +1702,8 @@ void ata_sff_lost_interrupt(struct ata_port *ap)
/* Only one outstanding command per SFF channel */
qc = ata_qc_from_tag(ap, ap->link.active_tag);
- /* Check we have a live one.. */
- if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE))
- return;
- /* We cannot lose an interrupt on a polled command */
- if (qc->tf.flags & ATA_TFLAG_POLLING)
+ /* We cannot lose an interrupt on a non-existent or polled command */
+ if (!qc || qc->tf.flags & ATA_TFLAG_POLLING)
return;
/* See if the controller thinks it is still busy - if so the command
isn't a lost IRQ but is still in progress */
@@ -1888,20 +1725,18 @@ EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
* ata_sff_freeze - Freeze SFF controller port
* @ap: port to freeze
*
- * Freeze BMDMA controller port.
+ * Freeze SFF controller port.
*
* LOCKING:
* Inherited from caller.
*/
void ata_sff_freeze(struct ata_port *ap)
{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
ap->ctl |= ATA_NIEN;
ap->last_ctl = ap->ctl;
- if (ioaddr->ctl_addr)
- iowrite8(ap->ctl, ioaddr->ctl_addr);
+ if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr)
+ ata_sff_set_devctl(ap, ap->ctl);
/* Under certain circumstances, some controllers raise IRQ on
* ATA_NIEN manipulation. Also, many controllers fail to mask
@@ -1927,7 +1762,7 @@ void ata_sff_thaw(struct ata_port *ap)
/* clear & re-enable interrupts */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
- ap->ops->sff_irq_on(ap);
+ ata_sff_irq_on(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_thaw);
@@ -2301,8 +2136,8 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
}
/* set up device control */
- if (ap->ioaddr.ctl_addr) {
- iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+ if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) {
+ ata_sff_set_devctl(ap, ap->ctl);
ap->last_ctl = ap->ctl;
}
}
@@ -2342,7 +2177,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
/**
- * ata_sff_error_handler - Stock error handler for BMDMA controller
+ * ata_sff_error_handler - Stock error handler for SFF controller
* @ap: port to handle error for
*
* Stock error handler for SFF controller. It can handle both
@@ -2359,62 +2194,32 @@ void ata_sff_error_handler(struct ata_port *ap)
ata_reset_fn_t hardreset = ap->ops->hardreset;
struct ata_queued_cmd *qc;
unsigned long flags;
- int thaw = 0;
qc = __ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
qc = NULL;
- /* reset PIO HSM and stop DMA engine */
spin_lock_irqsave(ap->lock, flags);
- ap->hsm_task_state = HSM_ST_IDLE;
-
- if (ap->ioaddr.bmdma_addr &&
- qc && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA)) {
- u8 host_stat;
-
- host_stat = ap->ops->bmdma_status(ap);
-
- /* BMDMA controllers indicate host bus error by
- * setting DMA_ERR bit and timing out. As it wasn't
- * really a timeout event, adjust error mask and
- * cancel frozen state.
- */
- if (qc->err_mask == AC_ERR_TIMEOUT
- && (host_stat & ATA_DMA_ERR)) {
- qc->err_mask = AC_ERR_HOST_BUS;
- thaw = 1;
- }
-
- ap->ops->bmdma_stop(qc);
- }
-
- ata_sff_sync(ap); /* FIXME: We don't need this */
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
- /* We *MUST* do FIFO draining before we issue a reset as several
- * devices helpfully clear their internal state and will lock solid
- * if we touch the data port post reset. Pass qc in case anyone wants
- * to do different PIO/DMA recovery or has per command fixups
+ /*
+ * We *MUST* do FIFO draining before we issue a reset as
+ * several devices helpfully clear their internal state and
+ * will lock solid if we touch the data port post reset. Pass
+ * qc in case anyone wants to do different PIO/DMA recovery or
+ * has per command fixups
*/
- if (ap->ops->drain_fifo)
- ap->ops->drain_fifo(qc);
+ if (ap->ops->sff_drain_fifo)
+ ap->ops->sff_drain_fifo(qc);
spin_unlock_irqrestore(ap->lock, flags);
- if (thaw)
- ata_eh_thaw_port(ap);
-
- /* PIO and DMA engines have been stopped, perform recovery */
-
- /* Ignore ata_sff_softreset if ctl isn't accessible and
- * built-in hardresets if SCR access isn't available.
- */
+ /* ignore ata_sff_softreset if ctl isn't accessible */
if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
softreset = NULL;
- if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
+
+ /* ignore built-in hardresets if SCR access is not available */
+ if ((hardreset == sata_std_hardreset ||
+ hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
@@ -2423,73 +2228,6 @@ void ata_sff_error_handler(struct ata_port *ap)
EXPORT_SYMBOL_GPL(ata_sff_error_handler);
/**
- * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
- * @qc: internal command to clean up
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned long flags;
-
- spin_lock_irqsave(ap->lock, flags);
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- if (ap->ioaddr.bmdma_addr)
- ap->ops->bmdma_stop(qc);
-
- spin_unlock_irqrestore(ap->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
-
-/**
- * ata_sff_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start(struct ata_port *ap)
-{
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-
-/**
- * ata_sff_port_start32 - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations for
- * devices that are capable of 32bit PIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start32(struct ata_port *ap)
-{
- ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start32);
-
-/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
@@ -2515,302 +2253,8 @@ void ata_sff_std_ports(struct ata_ioports *ioaddr)
}
EXPORT_SYMBOL_GPL(ata_sff_std_ports);
-unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
- unsigned long xfer_mask)
-{
- /* Filter out DMA modes if the device has been configured by
- the BIOS as PIO only */
-
- if (adev->link->ap->ioaddr.bmdma_addr == NULL)
- xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return xfer_mask;
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-
-/**
- * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_setup(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
- u8 dmactl;
-
- /* load PRD table addr. */
- mb(); /* make sure PRD table writes are visible to controller */
- iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
-
- /* specify data direction, triple-check start bit is clear */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
- if (!rw)
- dmactl |= ATA_DMA_WR;
- iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* issue r/w command */
- ap->ops->sff_exec_command(ap, &qc->tf);
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_setup);
-
-/**
- * ata_bmdma_start - Start a PCI IDE BMDMA transaction
- * @qc: Info associated with this ATA transaction.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 dmactl;
-
- /* start host DMA transaction */
- dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
- /* Strictly, one may wish to issue an ioread8() here, to
- * flush the mmio write. However, control also passes
- * to the hardware at this point, and it will interrupt
- * us when we are to resume control. So, in effect,
- * we don't care when the mmio write flushes.
- * Further, a read of the DMA status register _immediately_
- * following the write may not be what certain flaky hardware
- * is expected, so I think it is best to not add a readb()
- * without first all the MMIO ATA cards/mobos.
- * Or maybe I'm just being paranoid.
- *
- * FIXME: The posting of this write means I/O starts are
- * unneccessarily delayed for MMIO
- */
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_start);
-
-/**
- * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
- * @qc: Command we are ending DMA for
- *
- * Clears the ATA_DMA_START flag in the dma control register
- *
- * May be used as the bmdma_stop() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_stop(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- /* clear start/stop bit */
- iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
- mmio + ATA_DMA_CMD);
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_dma_pause(ap);
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_stop);
-
-/**
- * ata_bmdma_status - Read PCI IDE BMDMA status
- * @ap: Port associated with this ATA transaction.
- *
- * Read and return BMDMA status register.
- *
- * May be used as the bmdma_status() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-u8 ata_bmdma_status(struct ata_port *ap)
-{
- return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_status);
-
-/**
- * ata_bus_reset - reset host port and associated ATA channel
- * @ap: port to reset
- *
- * This is typically the first time we actually start issuing
- * commands to the ATA channel. We wait for BSY to clear, then
- * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
- * result. Determine what devices, if any, are on the channel
- * by looking at the device 0/1 error register. Look at the signature
- * stored in each device's taskfile registers, to determine if
- * the device is ATA or ATAPI.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host lock.
- *
- * SIDE EFFECTS:
- * Sets ATA_FLAG_DISABLED if bus reset fails.
- *
- * DEPRECATED:
- * This function is only for drivers which still use old EH and
- * will be removed soon.
- */
-void ata_bus_reset(struct ata_port *ap)
-{
- struct ata_device *device = ap->link.device;
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- u8 err;
- unsigned int dev0, dev1 = 0, devmask = 0;
- int rc;
-
- DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
-
- /* determine if device 0/1 are present */
- if (ap->flags & ATA_FLAG_SATA_RESET)
- dev0 = 1;
- else {
- dev0 = ata_devchk(ap, 0);
- if (slave_possible)
- dev1 = ata_devchk(ap, 1);
- }
-
- if (dev0)
- devmask |= (1 << 0);
- if (dev1)
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->sff_dev_select(ap, 0);
-
- /* issue bus reset */
- if (ap->flags & ATA_FLAG_SRST) {
- rc = ata_bus_softreset(ap, devmask,
- ata_deadline(jiffies, 40000));
- if (rc && rc != -ENODEV)
- goto err_out;
- }
-
- /*
- * determine by signature whether we have ATA or ATAPI devices
- */
- device[0].class = ata_sff_dev_classify(&device[0], dev0, &err);
- if ((slave_possible) && (err != 0x81))
- device[1].class = ata_sff_dev_classify(&device[1], dev1, &err);
-
- /* is double-select really necessary? */
- if (device[1].class != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 1);
- if (device[0].class != ATA_DEV_NONE)
- ap->ops->sff_dev_select(ap, 0);
-
- /* if no devices were detected, disable this port */
- if ((device[0].class == ATA_DEV_NONE) &&
- (device[1].class == ATA_DEV_NONE))
- goto err_out;
-
- if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
- /* set up device control for ATA_FLAG_SATA_RESET */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- ap->last_ctl = ap->ctl;
- }
-
- DPRINTK("EXIT\n");
- return;
-
-err_out:
- ata_port_printk(ap, KERN_ERR, "disabling port\n");
- ata_port_disable(ap);
-
- DPRINTK("EXIT\n");
-}
-EXPORT_SYMBOL_GPL(ata_bus_reset);
-
#ifdef CONFIG_PCI
-/**
- * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
- * @pdev: PCI device
- *
- * Some PCI ATA devices report simplex mode but in fact can be told to
- * enter non simplex mode. This implements the necessary logic to
- * perform the task on such devices. Calling it on other devices will
- * have -undefined- behaviour.
- */
-int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
-{
- unsigned long bmdma = pci_resource_start(pdev, 4);
- u8 simplex;
-
- if (bmdma == 0)
- return -ENOENT;
-
- simplex = inb(bmdma + 0x02);
- outb(simplex & 0x60, bmdma + 0x02);
- simplex = inb(bmdma + 0x02);
- if (simplex & 0x80)
- return -EOPNOTSUPP;
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
-
-/**
- * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
- * @host: target ATA host
- *
- * Acquire PCI BMDMA resources and initialize @host accordingly.
- *
- * LOCKING:
- * Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_pci_bmdma_init(struct ata_host *host)
-{
- struct device *gdev = host->dev;
- struct pci_dev *pdev = to_pci_dev(gdev);
- int i, rc;
-
- /* No BAR4 allocation: No DMA */
- if (pci_resource_start(pdev, 4) == 0)
- return 0;
-
- /* TODO: If we get no DMA mask we should fall back to PIO */
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
-
- /* request and iomap DMA region */
- rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
- if (rc) {
- dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
- return -ENOMEM;
- }
- host->iomap = pcim_iomap_table(pdev);
-
- for (i = 0; i < 2; i++) {
- struct ata_port *ap = host->ports[i];
- void __iomem *bmdma = host->iomap[4] + 8 * i;
-
- if (ata_port_is_dummy(ap))
- continue;
-
- ap->ioaddr.bmdma_addr = bmdma;
- if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
- (ioread8(bmdma + 2) & 0x80))
- host->flags |= ATA_HOST_SIMPLEX;
-
- ata_port_desc(ap, "bmdma 0x%llx",
- (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
-
static int ata_resources_present(struct pci_dev *pdev, int port)
{
int i;
@@ -2942,21 +2386,12 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_bmdma_init(host);
- if (rc)
- goto err_bmdma;
+ ata_pci_bmdma_init(host);
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
-err_bmdma:
- /* This is necessary because PCI and iomap resources are
- * merged and releasing the top group won't release the
- * acquired resources if some of those have been acquired
- * before entering this function.
- */
- pcim_iounmap_regions(pdev, 0xf);
err_out:
devres_release_group(&pdev->dev, NULL);
return rc;
@@ -3135,3 +2570,609 @@ out:
EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
#endif /* CONFIG_PCI */
+
+const struct ata_port_operations ata_bmdma_port_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_bmdma_qc_prep,
+ .qc_issue = ata_bmdma_qc_issue,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .port_start = ata_bmdma_port_start,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
+
+const struct ata_port_operations ata_bmdma32_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .sff_data_xfer = ata_sff_data_xfer32,
+ .port_start = ata_bmdma_port_start32,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
+
+/**
+ * ata_bmdma_fill_sg - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_bmdma_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_bmdma_prd *prd = ap->bmdma_prd;
+ struct scatterlist *sg;
+ unsigned int si, pi;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ prd[pi].addr = cpu_to_le32(addr);
+ prd[pi].flags_len = cpu_to_le32(len & 0xffff);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+ pi++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ * ata_bmdma_fill_sg_dumb - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command. Perform the fill
+ * so that we avoid writing any length 64K records for
+ * controllers that don't follow the spec.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_bmdma_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_bmdma_prd *prd = ap->bmdma_prd;
+ struct scatterlist *sg;
+ unsigned int si, pi;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, offset;
+ u32 sg_len, len, blen;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ blen = len & 0xffff;
+ prd[pi].addr = cpu_to_le32(addr);
+ if (blen == 0) {
+ /* Some PATA chipsets like the CS5530 can't
+ cope with 0x0000 meaning 64K as the spec
+ says */
+ prd[pi].flags_len = cpu_to_le32(0x8000);
+ blen = 0x8000;
+ prd[++pi].addr = cpu_to_le32(addr + 0x8000);
+ }
+ prd[pi].flags_len = cpu_to_le32(blen);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+ pi++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ * ata_bmdma_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_bmdma_fill_sg(qc);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep);
+
+/**
+ * ata_bmdma_dumb_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_bmdma_fill_sg_dumb(qc);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep);
+
+/**
+ * ata_bmdma_qc_issue - issue taskfile to a BMDMA controller
+ * @qc: command to issue to device
+ *
+ * This function issues a PIO, NODATA or DMA command to a
+ * SFF/BMDMA controller. PIO and NODATA are handled by
+ * ata_sff_qc_issue().
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, AC_ERR_* mask on failure
+ */
+unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* see ata_dma_blacklisted() */
+ BUG_ON((ap->flags & ATA_FLAG_PIO_POLLING) &&
+ qc->tf.protocol == ATAPI_PROT_DMA);
+
+ /* defer PIO handling to sff_qc_issue */
+ if (!ata_is_dma(qc->tf.protocol))
+ return ata_sff_qc_issue(qc);
+
+ /* select the device */
+ ata_dev_select(ap, qc->dev->devno, 1, 0);
+
+ /* start the command */
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->ops->bmdma_start(qc); /* initiate bmdma */
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+
+ case ATAPI_PROT_DMA:
+ WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ ata_sff_queue_pio_task(ap, 0);
+ break;
+
+ default:
+ WARN_ON(1);
+ return AC_ERR_SYSTEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
+
+/**
+ * ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Stock error handler for BMDMA controller. It can handle both
+ * PATA and SATA controllers. Most BMDMA controllers should be
+ * able to use this EH as-is or with some added handling before
+ * and after.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_error_handler(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ bool thaw = false;
+
+ qc = __ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (qc && ata_is_dma(qc->tf.protocol)) {
+ u8 host_stat;
+
+ host_stat = ap->ops->bmdma_status(ap);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = true;
+ }
+
+ ap->ops->bmdma_stop(qc);
+
+ /* if we're gonna thaw, make sure IRQ is clear */
+ if (thaw) {
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ }
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ ata_sff_error_handler(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
+
+/**
+ * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for BMDMA
+ * @qc: internal command to clean up
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ if (ata_is_dma(qc->tf.protocol)) {
+ spin_lock_irqsave(ap->lock, flags);
+ ap->ops->bmdma_stop(qc);
+ spin_unlock_irqrestore(ap->lock, flags);
+ }
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+
+ /* load PRD table addr. */
+ mb(); /* make sure PRD table writes are visible to controller */
+ iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_setup);
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ /* Strictly, one may wish to issue an ioread8() here, to
+ * flush the mmio write. However, control also passes
+ * to the hardware at this point, and it will interrupt
+ * us when we are to resume control. So, in effect,
+ * we don't care when the mmio write flushes.
+ * Further, a read of the DMA status register _immediately_
+ * following the write may not be what certain flaky hardware
+ * is expected, so I think it is best to not add a readb()
+ * without first all the MMIO ATA cards/mobos.
+ * Or maybe I'm just being paranoid.
+ *
+ * FIXME: The posting of this write means I/O starts are
+ * unneccessarily delayed for MMIO
+ */
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_start);
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @qc: Command we are ending DMA for
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ /* clear start/stop bit */
+ iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+ mmio + ATA_DMA_CMD);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+u8 ata_bmdma_status(struct ata_port *ap)
+{
+ return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
+
+
+/**
+ * ata_bmdma_port_start - Set port up for bmdma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start(struct ata_port *ap)
+{
+ if (ap->mwdma_mask || ap->udma_mask) {
+ ap->bmdma_prd =
+ dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ,
+ &ap->bmdma_prd_dma, GFP_KERNEL);
+ if (!ap->bmdma_prd)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start);
+
+/**
+ * ata_bmdma_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Enables 32bit PIO and allocates space for PRD
+ * table.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ return ata_bmdma_port_start(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
+
+#ifdef CONFIG_PCI
+
+/**
+ * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
+ * @pdev: PCI device
+ *
+ * Some PCI ATA devices report simplex mode but in fact can be told to
+ * enter non simplex mode. This implements the necessary logic to
+ * perform the task on such devices. Calling it on other devices will
+ * have -undefined- behaviour.
+ */
+int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
+{
+ unsigned long bmdma = pci_resource_start(pdev, 4);
+ u8 simplex;
+
+ if (bmdma == 0)
+ return -ENOENT;
+
+ simplex = inb(bmdma + 0x02);
+ outb(simplex & 0x60, bmdma + 0x02);
+ simplex = inb(bmdma + 0x02);
+ if (simplex & 0x80)
+ return -EOPNOTSUPP;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+
+static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
+{
+ int i;
+
+ dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
+ reason);
+
+ for (i = 0; i < 2; i++) {
+ host->ports[i]->mwdma_mask = 0;
+ host->ports[i]->udma_mask = 0;
+ }
+}
+
+/**
+ * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
+ * @host: target ATA host
+ *
+ * Acquire PCI BMDMA resources and initialize @host accordingly.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ */
+void ata_pci_bmdma_init(struct ata_host *host)
+{
+ struct device *gdev = host->dev;
+ struct pci_dev *pdev = to_pci_dev(gdev);
+ int i, rc;
+
+ /* No BAR4 allocation: No DMA */
+ if (pci_resource_start(pdev, 4) == 0) {
+ ata_bmdma_nodma(host, "BAR4 is zero");
+ return;
+ }
+
+ /*
+ * Some controllers require BMDMA region to be initialized
+ * even if DMA is not in use to clear IRQ status via
+ * ->sff_irq_clear method. Try to initialize bmdma_addr
+ * regardless of dma masks.
+ */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host, "failed to set dma mask");
+ if (!rc) {
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host,
+ "failed to set consistent dma mask");
+ }
+
+ /* request and iomap DMA region */
+ rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
+ if (rc) {
+ ata_bmdma_nodma(host, "failed to request/iomap BAR4");
+ return;
+ }
+ host->iomap = pcim_iomap_table(pdev);
+
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+ void __iomem *bmdma = host->iomap[4] + 8 * i;
+
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ ap->ioaddr.bmdma_addr = bmdma;
+ if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (ioread8(bmdma + 2) & 0x80))
+ host->flags |= ATA_HOST_SIMPLEX;
+
+ ata_port_desc(ap, "bmdma 0x%llx",
+ (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
+ }
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+
+#endif /* CONFIG_PCI */
+
+/**
+ * ata_sff_port_init - Initialize SFF/BMDMA ATA port
+ * @ap: Port to initialize
+ *
+ * Called on port allocation to initialize SFF/BMDMA specific
+ * fields.
+ *
+ * LOCKING:
+ * None.
+ */
+void ata_sff_port_init(struct ata_port *ap)
+{
+ INIT_DELAYED_WORK(&ap->sff_pio_task, ata_sff_pio_task);
+ ap->ctl = ATA_DEVCTL_OBS;
+ ap->last_ctl = 0xFF;
+}
+
+int __init ata_sff_init(void)
+{
+ /*
+ * FIXME: In UP case, there is only one workqueue thread and if you
+ * have more than one PIO device, latency is bloody awful, with
+ * occasional multi-second "hiccups" as one PIO device waits for
+ * another. It's an ugly wart that users DO occasionally complain
+ * about; luckily most users have at most one PIO polled device.
+ */
+ ata_sff_wq = create_workqueue("ata_sff");
+ if (!ata_sff_wq)
+ return -ENOMEM;
+
+ return 0;
+}
+
+void __exit ata_sff_exit(void)
+{
+ destroy_workqueue(ata_sff_wq);
+}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 823e630..4b84ed6 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -38,17 +38,6 @@ struct ata_scsi_args {
void (*done)(struct scsi_cmnd *);
};
-static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset)
-{
- if (reset == sata_std_hardreset)
- return 1;
-#ifdef CONFIG_ATA_SFF
- if (reset == sata_sff_hardreset)
- return 1;
-#endif
- return 0;
-}
-
/* libata-core.c */
enum {
/* flags for ata_dev_read_id() */
@@ -79,7 +68,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_port_flush_task(struct ata_port *ap);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen,
@@ -202,10 +190,19 @@ static inline int sata_pmp_attach(struct ata_device *dev)
/* libata-sff.c */
#ifdef CONFIG_ATA_SFF
-extern void ata_dev_select(struct ata_port *ap, unsigned int device,
- unsigned int wait, unsigned int can_sleep);
-extern u8 ata_irq_on(struct ata_port *ap);
-extern void ata_pio_task(struct work_struct *work);
+extern void ata_sff_flush_pio_task(struct ata_port *ap);
+extern void ata_sff_port_init(struct ata_port *ap);
+extern int ata_sff_init(void);
+extern void ata_sff_exit(void);
+#else /* CONFIG_ATA_SFF */
+static inline void ata_sff_flush_pio_task(struct ata_port *ap)
+{ }
+static inline void ata_sff_port_init(struct ata_port *ap)
+{ }
+static inline int ata_sff_init(void)
+{ return 0; }
+static inline void ata_sff_exit(void)
+{ }
#endif /* CONFIG_ATA_SFF */
#endif /* __LIBATA_H__ */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 1ea2be0..066b9f3 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -101,7 +101,7 @@ static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
- return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
+ return mask & acpi->mask[adev->devno];
}
/**
@@ -172,7 +172,7 @@ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
struct pata_acpi *acpi = ap->private_data;
if (acpi->gtm.flags & 0x10)
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
@@ -180,7 +180,7 @@ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
/**
@@ -205,7 +205,7 @@ static int pacpi_port_start(struct ata_port *ap)
return -ENOMEM;
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
- ret = ata_sff_port_start(ap);
+ ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index dc61b72..f306e10 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -124,7 +124,7 @@ static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index c6a946a..0da0dcc 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -202,7 +202,6 @@ static struct ata_port_operations pata_at91_port_ops = {
.sff_data_xfer = pata_at91_data_xfer_noirq,
.set_piomode = pata_at91_set_piomode,
.cable_detect = ata_cable_40wire,
- .port_start = ATA_OP_NULL,
};
static int __devinit pata_at91_probe(struct platform_device *pdev)
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index cbaf2ed..44d88b3 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -217,7 +217,7 @@ static struct scsi_host_template atiixp_sht = {
static struct ata_port_operations atiixp_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_prep = ata_bmdma_dumb_qc_prep,
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 02c81f1..6422cfd 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -821,6 +821,18 @@ static void bfin_dev_select(struct ata_port *ap, unsigned int device)
}
/**
+ * bfin_set_devctl - Write device control reg
+ * @ap: port where the device is
+ * @ctl: value to write
+ */
+
+static u8 bfin_set_devctl(struct ata_port *ap, u8 ctl)
+{
+ void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+ write_atapi_register(base, ATA_REG_CTRL, ctl);
+}
+
+/**
* bfin_bmdma_setup - Set up IDE DMA transaction
* @qc: Info associated with this ATA transaction.
*
@@ -1216,56 +1228,6 @@ static void bfin_irq_clear(struct ata_port *ap)
}
/**
- * bfin_irq_on - Enable interrupts on a port.
- * @ap: Port on which interrupts are enabled.
- *
- * Note: Original code is ata_sff_irq_on().
- */
-
-static unsigned char bfin_irq_on(struct ata_port *ap)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- u8 tmp;
-
- dev_dbg(ap->dev, "in atapi irq on\n");
- ap->ctl &= ~ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
- tmp = ata_wait_idle(ap);
-
- bfin_irq_clear(ap);
-
- return tmp;
-}
-
-/**
- * bfin_freeze - Freeze DMA controller port
- * @ap: port to freeze
- *
- * Note: Original code is ata_sff_freeze().
- */
-
-static void bfin_freeze(struct ata_port *ap)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
-
- dev_dbg(ap->dev, "in atapi dma freeze\n");
- ap->ctl |= ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
-
- /* Under certain circumstances, some controllers raise IRQ on
- * ATA_NIEN manipulation. Also, many controllers fail to mask
- * previously pending IRQ on ATA_NIEN assertion. Clear it.
- */
- ap->ops->sff_check_status(ap);
-
- bfin_irq_clear(ap);
-}
-
-/**
* bfin_thaw - Thaw DMA controller port
* @ap: port to thaw
*
@@ -1276,7 +1238,7 @@ void bfin_thaw(struct ata_port *ap)
{
dev_dbg(ap->dev, "in atapi dma thaw\n");
bfin_check_status(ap);
- bfin_irq_on(ap);
+ ata_sff_irq_on(ap);
}
/**
@@ -1293,7 +1255,7 @@ static void bfin_postreset(struct ata_link *link, unsigned int *classes)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
/* re-enable interrupts */
- bfin_irq_on(ap);
+ ata_sff_irq_on(ap);
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
@@ -1438,18 +1400,12 @@ static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance)
spin_lock_irqsave(&host->lock, flags);
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
+ struct ata_port *ap = host->ports[i];
+ struct ata_queued_cmd *qc;
- ap = host->ports[i];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
- (qc->flags & ATA_QCFLAG_ACTIVE))
- handled |= bfin_ata_host_intr(ap, qc);
- }
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
+ handled |= bfin_ata_host_intr(ap, qc);
}
spin_unlock_irqrestore(&host->lock, flags);
@@ -1465,7 +1421,7 @@ static struct scsi_host_template bfin_sht = {
};
static struct ata_port_operations bfin_pata_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
@@ -1476,6 +1432,7 @@ static struct ata_port_operations bfin_pata_ops = {
.sff_check_status = bfin_check_status,
.sff_check_altstatus = bfin_check_altstatus,
.sff_dev_select = bfin_dev_select,
+ .sff_set_devctl = bfin_set_devctl,
.bmdma_setup = bfin_bmdma_setup,
.bmdma_start = bfin_bmdma_start,
@@ -1485,13 +1442,11 @@ static struct ata_port_operations bfin_pata_ops = {
.qc_prep = ata_noop_qc_prep,
- .freeze = bfin_freeze,
.thaw = bfin_thaw,
.softreset = bfin_softreset,
.postreset = bfin_postreset,
.sff_irq_clear = bfin_irq_clear,
- .sff_irq_on = bfin_irq_on,
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 45896b3..e5f289f 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -153,24 +153,20 @@ static int cmd640_port_start(struct ata_port *ap)
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct cmd640_reg *timing;
- int ret = ata_sff_port_start(ap);
- if (ret < 0)
- return ret;
-
timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
if (timing == NULL)
return -ENOMEM;
timing->last = -1; /* Force a load */
ap->private_data = timing;
- return ret;
+ return 0;
}
static struct scsi_host_template cmd640_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations cmd640_port_ops = {
- .inherits = &ata_bmdma_port_ops,
+ .inherits = &ata_sff_port_ops,
/* In theory xfer_noirq is not needed once we kill the prefetcher */
.sff_data_xfer = ata_sff_data_xfer_noirq,
.qc_issue = cmd640_qc_issue,
@@ -181,13 +177,10 @@ static struct ata_port_operations cmd640_port_ops = {
static void cmd640_hardware_init(struct pci_dev *pdev)
{
- u8 r;
u8 ctrl;
/* CMD640 detected, commiserations */
pci_write_config_byte(pdev, 0x5B, 0x00);
- /* Get version info */
- pci_read_config_byte(pdev, CFR, &r);
/* PIO0 command cycles */
pci_write_config_byte(pdev, CMDTIM, 0);
/* 512 byte bursts (sector) */
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 95ebdac..17c5f34 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -110,7 +110,7 @@ static struct scsi_host_template cs5520_sht = {
static struct ata_port_operations cs5520_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_prep = ata_bmdma_dumb_qc_prep,
.cable_detect = ata_cable_40wire,
.set_piomode = cs5520_set_piomode,
};
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 738ad2e..e809a42 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -156,7 +156,7 @@ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
cs5530_set_dmamode(ap, adev);
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
static struct scsi_host_template cs5530_sht = {
@@ -167,7 +167,7 @@ static struct scsi_host_template cs5530_sht = {
static struct ata_port_operations cs5530_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_prep = ata_bmdma_dumb_qc_prep,
.qc_issue = cs5530_qc_issue,
.cable_detect = ata_cable_40wire,
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index af49bfb..8580eb3 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -182,7 +182,7 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
} else if (adev->class == ATA_DEV_ATAPI)
mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
static int hpt36x_cable_detect(struct ata_port *ap)
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 8839307..98b498b 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -282,7 +282,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
@@ -298,7 +298,7 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 01457b2..8b95aeb 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -320,7 +320,7 @@ static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23);
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
static struct scsi_host_template hpt3x2n_sht = {
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index fa812e2..b56e8f7 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -321,7 +321,7 @@ static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
}
static struct ata_port_operations pata_icside_port_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
/* no need to build any PRD tables for DMA */
.qc_prep = ata_noop_qc_prep,
.sff_data_xfer = ata_sff_data_xfer_noirq,
@@ -333,7 +333,8 @@ static struct ata_port_operations pata_icside_port_ops = {
.cable_detect = ata_cable_40wire,
.set_dmamode = pata_icside_set_dmamode,
.postreset = pata_icside_postreset,
- .post_internal_cmd = pata_icside_bmdma_stop,
+
+ .port_start = ATA_OP_NULL, /* don't need PRD table */
};
static void __devinit
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 5cb286f..2bd2b00 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -430,7 +430,7 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
case 0xFC: /* Internal 'report rebuild state' */
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
return AC_ERR_DEV;
@@ -448,7 +448,7 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc)
{
it821x_passthru_dev_select(qc->ap, qc->dev->devno);
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
/**
@@ -739,7 +739,7 @@ static int it821x_port_start(struct ata_port *ap)
struct it821x_dev *itdev;
u8 conf;
- int ret = ata_sff_port_start(ap);
+ int ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index 211b643..25df50f 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -720,6 +720,8 @@ static int pata_macio_port_start(struct ata_port *ap)
if (priv->dma_table_cpu == NULL) {
dev_err(priv->dev, "Unable to allocate DMA command list\n");
ap->ioaddr.bmdma_addr = NULL;
+ ap->mwdma_mask = 0;
+ ap->udma_mask = 0;
}
return 0;
}
@@ -917,7 +919,7 @@ static struct scsi_host_template pata_macio_sht = {
};
static struct ata_port_operations pata_macio_ops = {
- .inherits = &ata_sff_port_ops,
+ .inherits = &ata_bmdma_port_ops,
.freeze = pata_macio_freeze,
.set_piomode = pata_macio_set_timings,
@@ -925,7 +927,6 @@ static struct ata_port_operations pata_macio_ops = {
.cable_detect = pata_macio_cable_detect,
.sff_dev_select = pata_macio_dev_select,
.qc_prep = pata_macio_qc_prep,
- .mode_filter = ata_bmdma_mode_filter,
.bmdma_setup = pata_macio_bmdma_setup,
.bmdma_start = pata_macio_bmdma_start,
.bmdma_stop = pata_macio_bmdma_stop,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 9f5b053..96b11b6 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -64,13 +64,13 @@ struct mpc52xx_ata_priv {
/* ATAPI-4 PIO specs (in ns) */
-static const int ataspec_t0[5] = {600, 383, 240, 180, 120};
-static const int ataspec_t1[5] = { 70, 50, 30, 30, 25};
-static const int ataspec_t2_8[5] = {290, 290, 290, 80, 70};
-static const int ataspec_t2_16[5] = {165, 125, 100, 80, 70};
-static const int ataspec_t2i[5] = { 0, 0, 0, 70, 25};
-static const int ataspec_t4[5] = { 30, 20, 15, 10, 10};
-static const int ataspec_ta[5] = { 35, 35, 35, 35, 35};
+static const u16 ataspec_t0[5] = {600, 383, 240, 180, 120};
+static const u16 ataspec_t1[5] = { 70, 50, 30, 30, 25};
+static const u16 ataspec_t2_8[5] = {290, 290, 290, 80, 70};
+static const u16 ataspec_t2_16[5] = {165, 125, 100, 80, 70};
+static const u16 ataspec_t2i[5] = { 0, 0, 0, 70, 25};
+static const u16 ataspec_t4[5] = { 30, 20, 15, 10, 10};
+static const u16 ataspec_ta[5] = { 35, 35, 35, 35, 35};
#define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c)))
@@ -78,13 +78,13 @@ static const int ataspec_ta[5] = { 35, 35, 35, 35, 35};
/* ATAPI-4 MDMA specs (in clocks) */
struct mdmaspec {
- u32 t0M;
- u32 td;
- u32 th;
- u32 tj;
- u32 tkw;
- u32 tm;
- u32 tn;
+ u8 t0M;
+ u8 td;
+ u8 th;
+ u8 tj;
+ u8 tkw;
+ u8 tm;
+ u8 tn;
};
static const struct mdmaspec mdmaspec66[3] = {
@@ -101,23 +101,23 @@ static const struct mdmaspec mdmaspec132[3] = {
/* ATAPI-4 UDMA specs (in clocks) */
struct udmaspec {
- u32 tcyc;
- u32 t2cyc;
- u32 tds;
- u32 tdh;
- u32 tdvs;
- u32 tdvh;
- u32 tfs;
- u32 tli;
- u32 tmli;
- u32 taz;
- u32 tzah;
- u32 tenv;
- u32 tsr;
- u32 trfs;
- u32 trp;
- u32 tack;
- u32 tss;
+ u8 tcyc;
+ u8 t2cyc;
+ u8 tds;
+ u8 tdh;
+ u8 tdvs;
+ u8 tdvh;
+ u8 tfs;
+ u8 tli;
+ u8 tmli;
+ u8 taz;
+ u8 tzah;
+ u8 tenv;
+ u8 tsr;
+ u8 trfs;
+ u8 trp;
+ u8 tack;
+ u8 tss;
};
static const struct udmaspec udmaspec66[6] = {
@@ -270,7 +270,7 @@ mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv *priv, int dev, int pio)
{
struct mpc52xx_ata_timings *timing = &priv->timings[dev];
unsigned int ipb_period = priv->ipb_period;
- unsigned int t0, t1, t2_8, t2_16, t2i, t4, ta;
+ u32 t0, t1, t2_8, t2_16, t2i, t4, ta;
if ((pio < 0) || (pio > 4))
return -EINVAL;
@@ -299,8 +299,8 @@ mpc52xx_ata_compute_mdma_timings(struct mpc52xx_ata_priv *priv, int dev,
if (speed < 0 || speed > 2)
return -EINVAL;
- t->mdma1 = (s->t0M << 24) | (s->td << 16) | (s->tkw << 8) | (s->tm);
- t->mdma2 = (s->th << 24) | (s->tj << 16) | (s->tn << 8);
+ t->mdma1 = ((u32)s->t0M << 24) | ((u32)s->td << 16) | ((u32)s->tkw << 8) | s->tm;
+ t->mdma2 = ((u32)s->th << 24) | ((u32)s->tj << 16) | ((u32)s->tn << 8);
t->using_udma = 0;
return 0;
@@ -316,11 +316,11 @@ mpc52xx_ata_compute_udma_timings(struct mpc52xx_ata_priv *priv, int dev,
if (speed < 0 || speed > 2)
return -EINVAL;
- t->udma1 = (s->t2cyc << 24) | (s->tcyc << 16) | (s->tds << 8) | s->tdh;
- t->udma2 = (s->tdvs << 24) | (s->tdvh << 16) | (s->tfs << 8) | s->tli;
- t->udma3 = (s->tmli << 24) | (s->taz << 16) | (s->tenv << 8) | s->tsr;
- t->udma4 = (s->tss << 24) | (s->trfs << 16) | (s->trp << 8) | s->tack;
- t->udma5 = (s->tzah << 24);
+ t->udma1 = ((u32)s->t2cyc << 24) | ((u32)s->tcyc << 16) | ((u32)s->tds << 8) | s->tdh;
+ t->udma2 = ((u32)s->tdvs << 24) | ((u32)s->tdvh << 16) | ((u32)s->tfs << 8) | s->tli;
+ t->udma3 = ((u32)s->tmli << 24) | ((u32)s->taz << 16) | ((u32)s->tenv << 8) | s->tsr;
+ t->udma4 = ((u32)s->tss << 24) | ((u32)s->trfs << 16) | ((u32)s->trp << 8) | s->tack;
+ t->udma5 = (u32)s->tzah << 24;
t->using_udma = 1;
return 0;
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 830431f..fdbba2d 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -126,7 +126,7 @@ static void ns87415_bmdma_setup(struct ata_queued_cmd *qc)
/* load PRD table addr. */
mb(); /* make sure PRD table writes are visible to controller */
- iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+ iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
/* specify data direction, triple-check start bit is clear */
dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 005a444..3001109 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -489,9 +489,8 @@ static void octeon_cf_exec_command16(struct ata_port *ap,
ata_wait_idle(ap);
}
-static u8 octeon_cf_irq_on(struct ata_port *ap)
+static void octeon_cf_irq_on(struct ata_port *ap)
{
- return 0;
}
static void octeon_cf_irq_clear(struct ata_port *ap)
@@ -655,9 +654,6 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
ap = host->ports[i];
ocd = ap->dev->platform_data;
- if (ap->flags & ATA_FLAG_DISABLED)
- continue;
-
ocd = ap->dev->platform_data;
cf_port = ap->private_data;
dma_int.u64 =
@@ -667,8 +663,7 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
- (qc->flags & ATA_QCFLAG_ACTIVE)) {
+ if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING)) {
if (dma_int.s.done && !dma_cfg.s.en) {
if (!sg_is_last(qc->cursg)) {
qc->cursg = sg_next(qc->cursg);
@@ -738,8 +733,7 @@ static void octeon_cf_delayed_finish(struct work_struct *work)
goto out;
}
qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
- (qc->flags & ATA_QCFLAG_ACTIVE))
+ if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING))
octeon_cf_dma_finished(ap, qc);
out:
spin_unlock_irqrestore(&host->lock, flags);
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 5f6aba7..988ef26 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -200,7 +200,7 @@ static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
if (ata_dma_enabled(adev))
oldpiix_set_dmamode(ap, adev);
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index d94b8f0..ef37438 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -175,7 +175,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
.sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode_8bit,
- .drain_fifo = pcmcia_8bit_drain_fifo,
+ .sff_drain_fifo = pcmcia_8bit_drain_fifo,
};
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index ca5cad0..09f1f22 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -265,7 +265,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
@@ -274,7 +274,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 9ac0897..fa1e2f3 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -249,7 +249,7 @@ static int pdc2026x_port_start(struct ata_port *ap)
u8 burst = ioread8(bmdma + 0x1f);
iowrite8(burst | 0x01, bmdma + 0x1f);
}
- return ata_sff_port_start(ap);
+ return ata_bmdma_port_start(ap);
}
/**
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 3f6ebc6..50400fa 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -53,7 +53,6 @@ static struct ata_port_operations pata_platform_port_ops = {
.sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_unknown,
.set_mode = pata_platform_set_mode,
- .port_start = ATA_OP_NULL,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index fc96022..a5fa388 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -179,7 +179,7 @@ static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc)
radisys_set_piomode(ap, adev);
}
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index dfecc6f..6b5b63a 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -174,7 +174,7 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
sc1200_set_dmamode(ap, adev);
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
/**
@@ -209,7 +209,7 @@ static struct scsi_host_template sc1200_sht = {
static struct ata_port_operations sc1200_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_prep = ata_bmdma_dumb_qc_prep,
.qc_issue = sc1200_qc_issue,
.qc_defer = sc1200_qc_defer,
.cable_detect = ata_cable_40wire,
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 4257d6b..6f6193b 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -265,7 +265,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
@@ -416,6 +416,17 @@ static void scc_dev_select (struct ata_port *ap, unsigned int device)
}
/**
+ * scc_set_devctl - Write device control reg
+ * @ap: port where the device is
+ * @ctl: value to write
+ */
+
+static void scc_set_devctl(struct ata_port *ap, u8 ctl)
+{
+ out_be32(ap->ioaddr.ctl_addr, ctl);
+}
+
+/**
* scc_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
@@ -430,7 +441,7 @@ static void scc_bmdma_setup (struct ata_queued_cmd *qc)
void __iomem *mmio = ap->ioaddr.bmdma_addr;
/* load PRD table addr */
- out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
+ out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma);
/* specify data direction, triple-check start bit is clear */
dmactl = in_be32(mmio + SCC_DMA_CMD);
@@ -501,8 +512,8 @@ static unsigned int scc_devchk (struct ata_port *ap,
* Note: Original code is ata_sff_wait_after_reset
*/
-int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
- unsigned long deadline)
+static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -817,54 +828,6 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
}
/**
- * scc_irq_on - Enable interrupts on a port.
- * @ap: Port on which interrupts are enabled.
- *
- * Note: Original code is ata_sff_irq_on().
- */
-
-static u8 scc_irq_on (struct ata_port *ap)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 tmp;
-
- ap->ctl &= ~ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- out_be32(ioaddr->ctl_addr, ap->ctl);
- tmp = ata_wait_idle(ap);
-
- ap->ops->sff_irq_clear(ap);
-
- return tmp;
-}
-
-/**
- * scc_freeze - Freeze BMDMA controller port
- * @ap: port to freeze
- *
- * Note: Original code is ata_sff_freeze().
- */
-
-static void scc_freeze (struct ata_port *ap)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- ap->ctl |= ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- out_be32(ioaddr->ctl_addr, ap->ctl);
-
- /* Under certain circumstances, some controllers raise IRQ on
- * ATA_NIEN manipulation. Also, many controllers fail to mask
- * previously pending IRQ on ATA_NIEN assertion. Clear it.
- */
- ap->ops->sff_check_status(ap);
-
- ap->ops->sff_irq_clear(ap);
-}
-
-/**
* scc_pata_prereset - prepare for reset
* @ap: ATA port to be reset
* @deadline: deadline jiffies for the operation
@@ -903,8 +866,7 @@ static void scc_postreset(struct ata_link *link, unsigned int *classes)
}
/* set up device control */
- if (ap->ioaddr.ctl_addr)
- out_be32(ap->ioaddr.ctl_addr, ap->ctl);
+ out_be32(ap->ioaddr.ctl_addr, ap->ctl);
DPRINTK("EXIT\n");
}
@@ -930,7 +892,7 @@ static void scc_irq_clear (struct ata_port *ap)
* scc_port_start - Set port up for dma.
* @ap: Port to initialize
*
- * Allocate space for PRD table using ata_port_start().
+ * Allocate space for PRD table using ata_bmdma_port_start().
* Set PRD table address for PTERADD. (PRD Transfer End Read)
*/
@@ -939,11 +901,11 @@ static int scc_port_start (struct ata_port *ap)
void __iomem *mmio = ap->ioaddr.bmdma_addr;
int rc;
- rc = ata_port_start(ap);
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
- out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma);
+ out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma);
return 0;
}
@@ -978,6 +940,7 @@ static struct ata_port_operations scc_pata_ops = {
.sff_check_status = scc_check_status,
.sff_check_altstatus = scc_check_altstatus,
.sff_dev_select = scc_dev_select,
+ .sff_set_devctl = scc_set_devctl,
.bmdma_setup = scc_bmdma_setup,
.bmdma_start = scc_bmdma_start,
@@ -985,14 +948,11 @@ static struct ata_port_operations scc_pata_ops = {
.bmdma_status = scc_bmdma_status,
.sff_data_xfer = scc_data_xfer,
- .freeze = scc_freeze,
.prereset = scc_pata_prereset,
.softreset = scc_softreset,
.postreset = scc_postreset,
- .post_internal_cmd = scc_bmdma_stop,
.sff_irq_clear = scc_irq_clear,
- .sff_irq_on = scc_irq_on,
.port_start = scc_port_start,
.port_stop = scc_port_stop,
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index 99cceb4..86b3d01 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -174,22 +174,12 @@ static int __devinit sch_init_one(struct pci_dev *pdev,
{
static int printed_version;
const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
- struct ata_host *host;
- int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- /* enable device and prepare host */
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
- if (rc)
- return rc;
- pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_sff_interrupt, &sch_sht);
+ return ata_pci_sff_init_one(pdev, ppi, &sch_sht, NULL, 0);
}
static int __init sch_init(void)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 9524d54..43ea389 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -198,7 +198,7 @@ static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned l
{
if (adev->class == ATA_DEV_ATA)
mask &= ~ATA_MASK_UDMA;
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
@@ -218,7 +218,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
/* Disk, UDMA */
if (adev->class != ATA_DEV_ATA)
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
/* Actually do need to check */
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -227,7 +227,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
if (!strcmp(p, model_num))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index c6c589c..43faf10 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -190,15 +190,37 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
pci_write_config_word(pdev, ua, ultra);
}
+/**
+ * sil680_sff_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues ATA command, with proper synchronization with interrupt
+ * handler / other threads. Use our MMIO space for PCI posting to avoid
+ * a hideously slow cycle all the way to the device.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void sil680_sff_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+ iowrite8(tf->command, ap->ioaddr.command_addr);
+ ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+}
+
static struct scsi_host_template sil680_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
+
static struct ata_port_operations sil680_port_ops = {
- .inherits = &ata_bmdma32_port_ops,
- .cable_detect = sil680_cable_detect,
- .set_piomode = sil680_set_piomode,
- .set_dmamode = sil680_set_dmamode,
+ .inherits = &ata_bmdma32_port_ops,
+ .sff_exec_command = sil680_sff_exec_command,
+ .cable_detect = sil680_cable_detect,
+ .set_piomode = sil680_set_piomode,
+ .set_dmamode = sil680_set_dmamode,
};
/**
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 741e7cb..7e3e0a5 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -355,7 +355,7 @@ static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask)
mask &= ~ ATA_MASK_UDMA;
}
}
- return ata_bmdma_mode_filter(dev, mask);
+ return mask;
}
/**
@@ -417,8 +417,6 @@ static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
tf->lbam,
tf->lbah);
}
-
- ata_wait_idle(ap);
}
static int via_port_start(struct ata_port *ap)
@@ -426,7 +424,7 @@ static int via_port_start(struct ata_port *ap)
struct via_port *vp;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int ret = ata_sff_port_start(ap);
+ int ret = ata_bmdma_port_start(ap);
if (ret < 0)
return ret;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 5904cfd..adbe042 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -324,10 +324,8 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
VPRINTK("ENTER\n");
adma_enter_reg_mode(qc->ap);
- if (qc->tf.protocol != ATA_PROT_DMA) {
- ata_sff_qc_prep(qc);
+ if (qc->tf.protocol != ATA_PROT_DMA)
return;
- }
buf[i++] = 0; /* Response flags */
buf[i++] = 0; /* reserved */
@@ -442,8 +440,6 @@ static inline unsigned int adma_intr_pkt(struct ata_host *host)
continue;
handled = 1;
adma_enter_reg_mode(ap);
- if (ap->flags & ATA_FLAG_DISABLED)
- continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
continue;
@@ -484,42 +480,38 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host)
unsigned int handled = 0, port_no;
for (port_no = 0; port_no < host->n_ports; ++port_no) {
- struct ata_port *ap;
- ap = host->ports[port_no];
- if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) {
- struct ata_queued_cmd *qc;
- struct adma_port_priv *pp = ap->private_data;
- if (!pp || pp->state != adma_state_mmio)
+ struct ata_port *ap = host->ports[port_no];
+ struct adma_port_priv *pp = ap->private_data;
+ struct ata_queued_cmd *qc;
+
+ if (!pp || pp->state != adma_state_mmio)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
+
+ /* check main status, clearing INTRQ */
+ u8 status = ata_sff_check_status(ap);
+ if ((status & ATA_BUSY))
continue;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
-
- /* check main status, clearing INTRQ */
- u8 status = ata_sff_check_status(ap);
- if ((status & ATA_BUSY))
- continue;
- DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
- ap->print_id, qc->tf.protocol, status);
-
- /* complete taskfile transaction */
- pp->state = adma_state_idle;
- qc->err_mask |= ac_err_mask(status);
- if (!qc->err_mask)
- ata_qc_complete(qc);
- else {
- struct ata_eh_info *ehi =
- &ap->link.eh_info;
- ata_ehi_clear_desc(ehi);
- ata_ehi_push_desc(ehi,
- "status 0x%02X", status);
-
- if (qc->err_mask == AC_ERR_DEV)
- ata_port_abort(ap);
- else
- ata_port_freeze(ap);
- }
- handled = 1;
+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
+ ap->print_id, qc->tf.protocol, status);
+
+ /* complete taskfile transaction */
+ pp->state = adma_state_idle;
+ qc->err_mask |= ac_err_mask(status);
+ if (!qc->err_mask)
+ ata_qc_complete(qc);
+ else {
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "status 0x%02X", status);
+
+ if (qc->err_mask == AC_ERR_DEV)
+ ata_port_abort(ap);
+ else
+ ata_port_freeze(ap);
}
+ handled = 1;
}
}
return handled;
@@ -562,11 +554,7 @@ static int adma_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct adma_port_priv *pp;
- int rc;
- rc = ata_port_start(ap);
- if (rc)
- return rc;
adma_enter_reg_mode(ap);
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 27dc6c8..a36149e 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -415,22 +415,11 @@ static irqreturn_t inic_interrupt(int irq, void *dev_instance)
spin_lock(&host->lock);
- for (i = 0; i < NR_PORTS; i++) {
- struct ata_port *ap = host->ports[i];
-
- if (!(host_irq_stat & (HIRQ_PORT0 << i)))
- continue;
-
- if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
- inic_host_intr(ap);
+ for (i = 0; i < NR_PORTS; i++)
+ if (host_irq_stat & (HIRQ_PORT0 << i)) {
+ inic_host_intr(host->ports[i]);
handled++;
- } else {
- if (ata_ratelimit())
- dev_printk(KERN_ERR, host->dev, "interrupt "
- "from disabled port %d (0x%x)\n",
- i, host_irq_stat);
}
- }
spin_unlock(&host->lock);
@@ -679,8 +668,7 @@ static void init_port(struct ata_port *ap)
memset(pp->pkt, 0, sizeof(struct inic_pkt));
memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE);
- /* setup PRD and CPB lookup table addresses */
- writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+ /* setup CPB lookup table addresses */
writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR);
}
@@ -694,7 +682,6 @@ static int inic_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct inic_port_priv *pp;
- int rc;
/* alloc and initialize private data */
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
@@ -703,10 +690,6 @@ static int inic_port_start(struct ata_port *ap)
ap->private_data = pp;
/* Alloc resources */
- rc = ata_port_start(ap);
- if (rc)
- return rc;
-
pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt),
&pp->pkt_dma, GFP_KERNEL);
if (!pp->pkt)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 71cc0d4..f3471bc 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -686,16 +686,27 @@ static struct ata_port_operations mv5_ops = {
};
static struct ata_port_operations mv6_ops = {
- .inherits = &mv5_ops,
+ .inherits = &ata_bmdma_port_ops,
+
+ .lost_interrupt = ATA_OP_NULL,
+
+ .qc_defer = mv_qc_defer,
+ .qc_prep = mv_qc_prep,
+ .qc_issue = mv_qc_issue,
+
.dev_config = mv6_dev_config,
- .scr_read = mv_scr_read,
- .scr_write = mv_scr_write,
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+ .softreset = mv_softreset,
.pmp_hardreset = mv_pmp_hardreset,
.pmp_softreset = mv_softreset,
- .softreset = mv_softreset,
.error_handler = mv_pmp_error_handler,
+ .scr_read = mv_scr_read,
+ .scr_write = mv_scr_write,
+
.sff_check_status = mv_sff_check_status,
.sff_irq_clear = mv_sff_irq_clear,
.check_atapi_dma = mv_check_atapi_dma,
@@ -703,6 +714,9 @@ static struct ata_port_operations mv6_ops = {
.bmdma_start = mv_bmdma_start,
.bmdma_stop = mv_bmdma_stop,
.bmdma_status = mv_bmdma_status,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
};
static struct ata_port_operations mv_iie_ops = {
@@ -2248,7 +2262,7 @@ static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc)
}
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
return 0;
}
@@ -2344,7 +2358,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
if (IS_GEN_II(hpriv))
return mv_qc_issue_fis(qc);
}
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
}
static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
@@ -2355,13 +2369,9 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
return NULL;
qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc) {
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- qc = NULL;
- else if (!(qc->flags & ATA_QCFLAG_ACTIVE))
- qc = NULL;
- }
- return qc;
+ if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING))
+ return qc;
+ return NULL;
}
static void mv_pmp_error_handler(struct ata_port *ap)
@@ -2546,9 +2556,7 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
char *when = "idle";
ata_ehi_clear_desc(ehi);
- if (ap->flags & ATA_FLAG_DISABLED) {
- when = "disabled";
- } else if (edma_was_enabled) {
+ if (edma_was_enabled) {
when = "EDMA enabled";
} else {
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
@@ -2782,10 +2790,6 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause)
struct mv_port_priv *pp;
int edma_was_enabled;
- if (ap->flags & ATA_FLAG_DISABLED) {
- mv_unexpected_intr(ap, 0);
- return;
- }
/*
* Grab a snapshot of the EDMA_EN flag setting,
* so that we have a consistent view for this port,
@@ -3656,9 +3660,6 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio)
/* special case: control/altstatus doesn't have ATA_REG_ address */
port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST;
- /* unused: */
- port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
-
/* Clear any currently outstanding port interrupt conditions */
serr = port_mmio + mv_scr_offset(SCR_ERROR);
writelfl(readl(serr), serr);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 2a98b09..baa8f0d 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -272,7 +272,7 @@ enum ncq_saw_flag_list {
};
struct nv_swncq_port_priv {
- struct ata_prd *prd; /* our SG list */
+ struct ata_bmdma_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
void __iomem *sactive_block;
void __iomem *irq_block;
@@ -933,107 +933,108 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
+ struct nv_adma_port_priv *pp = ap->private_data;
+ void __iomem *mmio = pp->ctl_block;
+ u16 status;
+ u32 gen_ctl;
+ u32 notifier, notifier_error;
+
notifier_clears[i] = 0;
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- struct nv_adma_port_priv *pp = ap->private_data;
- void __iomem *mmio = pp->ctl_block;
- u16 status;
- u32 gen_ctl;
- u32 notifier, notifier_error;
-
- /* if ADMA is disabled, use standard ata interrupt handler */
- if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
- >> (NV_INT_PORT_SHIFT * i);
- handled += nv_host_intr(ap, irq_stat);
- continue;
- }
+ /* if ADMA is disabled, use standard ata interrupt handler */
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
+ u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
+ >> (NV_INT_PORT_SHIFT * i);
+ handled += nv_host_intr(ap, irq_stat);
+ continue;
+ }
- /* if in ATA register mode, check for standard interrupts */
- if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
- u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
- >> (NV_INT_PORT_SHIFT * i);
- if (ata_tag_valid(ap->link.active_tag))
- /** NV_INT_DEV indication seems unreliable at times
- at least in ADMA mode. Force it on always when a
- command is active, to prevent losing interrupts. */
- irq_stat |= NV_INT_DEV;
- handled += nv_host_intr(ap, irq_stat);
- }
+ /* if in ATA register mode, check for standard interrupts */
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+ u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
+ >> (NV_INT_PORT_SHIFT * i);
+ if (ata_tag_valid(ap->link.active_tag))
+ /** NV_INT_DEV indication seems unreliable
+ at times at least in ADMA mode. Force it
+ on always when a command is active, to
+ prevent losing interrupts. */
+ irq_stat |= NV_INT_DEV;
+ handled += nv_host_intr(ap, irq_stat);
+ }
+
+ notifier = readl(mmio + NV_ADMA_NOTIFIER);
+ notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+ notifier_clears[i] = notifier | notifier_error;
+
+ gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
+
+ if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
+ !notifier_error)
+ /* Nothing to do */
+ continue;
+
+ status = readw(mmio + NV_ADMA_STAT);
+
+ /*
+ * Clear status. Ensure the controller sees the
+ * clearing before we start looking at any of the CPB
+ * statuses, so that any CPB completions after this
+ * point in the handler will raise another interrupt.
+ */
+ writew(status, mmio + NV_ADMA_STAT);
+ readw(mmio + NV_ADMA_STAT); /* flush posted write */
+ rmb();
+
+ handled++; /* irq handled if we got here */
- notifier = readl(mmio + NV_ADMA_NOTIFIER);
- notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
- notifier_clears[i] = notifier | notifier_error;
-
- gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
-
- if (!NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
- !notifier_error)
- /* Nothing to do */
- continue;
-
- status = readw(mmio + NV_ADMA_STAT);
-
- /* Clear status. Ensure the controller sees the clearing before we start
- looking at any of the CPB statuses, so that any CPB completions after
- this point in the handler will raise another interrupt. */
- writew(status, mmio + NV_ADMA_STAT);
- readw(mmio + NV_ADMA_STAT); /* flush posted write */
- rmb();
-
- handled++; /* irq handled if we got here */
-
- /* freeze if hotplugged or controller error */
- if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
- NV_ADMA_STAT_HOTUNPLUG |
- NV_ADMA_STAT_TIMEOUT |
- NV_ADMA_STAT_SERROR))) {
- struct ata_eh_info *ehi = &ap->link.eh_info;
-
- ata_ehi_clear_desc(ehi);
- __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status);
- if (status & NV_ADMA_STAT_TIMEOUT) {
- ehi->err_mask |= AC_ERR_SYSTEM;
- ata_ehi_push_desc(ehi, "timeout");
- } else if (status & NV_ADMA_STAT_HOTPLUG) {
- ata_ehi_hotplugged(ehi);
- ata_ehi_push_desc(ehi, "hotplug");
- } else if (status & NV_ADMA_STAT_HOTUNPLUG) {
- ata_ehi_hotplugged(ehi);
- ata_ehi_push_desc(ehi, "hot unplug");
- } else if (status & NV_ADMA_STAT_SERROR) {
- /* let libata analyze SError and figure out the cause */
- ata_ehi_push_desc(ehi, "SError");
- } else
- ata_ehi_push_desc(ehi, "unknown");
- ata_port_freeze(ap);
- continue;
+ /* freeze if hotplugged or controller error */
+ if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
+ NV_ADMA_STAT_HOTUNPLUG |
+ NV_ADMA_STAT_TIMEOUT |
+ NV_ADMA_STAT_SERROR))) {
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+
+ ata_ehi_clear_desc(ehi);
+ __ata_ehi_push_desc(ehi, "ADMA status 0x%08x: ", status);
+ if (status & NV_ADMA_STAT_TIMEOUT) {
+ ehi->err_mask |= AC_ERR_SYSTEM;
+ ata_ehi_push_desc(ehi, "timeout");
+ } else if (status & NV_ADMA_STAT_HOTPLUG) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "hotplug");
+ } else if (status & NV_ADMA_STAT_HOTUNPLUG) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "hot unplug");
+ } else if (status & NV_ADMA_STAT_SERROR) {
+ /* let EH analyze SError and figure out cause */
+ ata_ehi_push_desc(ehi, "SError");
+ } else
+ ata_ehi_push_desc(ehi, "unknown");
+ ata_port_freeze(ap);
+ continue;
+ }
+
+ if (status & (NV_ADMA_STAT_DONE |
+ NV_ADMA_STAT_CPBERR |
+ NV_ADMA_STAT_CMD_COMPLETE)) {
+ u32 check_commands = notifier_clears[i];
+ int pos, error = 0;
+
+ if (status & NV_ADMA_STAT_CPBERR) {
+ /* check all active commands */
+ if (ata_tag_valid(ap->link.active_tag))
+ check_commands = 1 <<
+ ap->link.active_tag;
+ else
+ check_commands = ap->link.sactive;
}
- if (status & (NV_ADMA_STAT_DONE |
- NV_ADMA_STAT_CPBERR |
- NV_ADMA_STAT_CMD_COMPLETE)) {
- u32 check_commands = notifier_clears[i];
- int pos, error = 0;
-
- if (status & NV_ADMA_STAT_CPBERR) {
- /* Check all active commands */
- if (ata_tag_valid(ap->link.active_tag))
- check_commands = 1 <<
- ap->link.active_tag;
- else
- check_commands = ap->
- link.sactive;
- }
-
- /** Check CPBs for completed commands */
- while ((pos = ffs(check_commands)) && !error) {
- pos--;
- error = nv_adma_check_cpb(ap, pos,
+ /* check CPBs for completed commands */
+ while ((pos = ffs(check_commands)) && !error) {
+ pos--;
+ error = nv_adma_check_cpb(ap, pos,
notifier_error & (1 << pos));
- check_commands &= ~(1 << pos);
- }
+ check_commands &= ~(1 << pos);
}
}
}
@@ -1130,7 +1131,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
struct nv_adma_port_priv *pp = qc->ap->private_data;
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
- ata_sff_post_internal_cmd(qc);
+ ata_bmdma_post_internal_cmd(qc);
}
static int nv_adma_port_start(struct ata_port *ap)
@@ -1155,7 +1156,8 @@ static int nv_adma_port_start(struct ata_port *ap)
if (rc)
return rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
@@ -1407,7 +1409,7 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- ata_sff_qc_prep(qc);
+ ata_bmdma_qc_prep(qc);
return;
}
@@ -1466,7 +1468,7 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
} else
nv_adma_mode(qc->ap);
@@ -1498,22 +1500,19 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
spin_lock_irqsave(&host->lock, flags);
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
-
- ap = host->ports[i];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
+ struct ata_port *ap = host->ports[i];
+ struct ata_queued_cmd *qc;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled += ata_sff_host_intr(ap, qc);
- else
- // No request pending? Clear interrupt status
- // anyway, in case there's one pending.
- ap->ops->sff_check_status(ap);
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
+ handled += ata_sff_host_intr(ap, qc);
+ } else {
+ /*
+ * No request pending? Clear interrupt status
+ * anyway, in case there's one pending.
+ */
+ ap->ops->sff_check_status(ap);
}
-
}
spin_unlock_irqrestore(&host->lock, flags);
@@ -1526,11 +1525,7 @@ static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat)
int i, handled = 0;
for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- if (ap && !(ap->flags & ATA_FLAG_DISABLED))
- handled += nv_host_intr(ap, irq_stat);
-
+ handled += nv_host_intr(host->ports[i], irq_stat);
irq_stat >>= NV_INT_PORT_SHIFT;
}
@@ -1744,7 +1739,7 @@ static void nv_adma_error_handler(struct ata_port *ap)
readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
- ata_sff_error_handler(ap);
+ ata_bmdma_error_handler(ap);
}
static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
@@ -1870,7 +1865,7 @@ static void nv_swncq_error_handler(struct ata_port *ap)
ehc->i.action |= ATA_EH_RESET;
}
- ata_sff_error_handler(ap);
+ ata_bmdma_error_handler(ap);
}
#ifdef CONFIG_PM
@@ -1991,7 +1986,8 @@ static int nv_swncq_port_start(struct ata_port *ap)
struct nv_swncq_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we might fallback to bmdma, allocate bmdma resources */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
@@ -2016,7 +2012,7 @@ static int nv_swncq_port_start(struct ata_port *ap)
static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
{
if (qc->tf.protocol != ATA_PROT_NCQ) {
- ata_sff_qc_prep(qc);
+ ata_bmdma_qc_prep(qc);
return;
}
@@ -2031,7 +2027,7 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
struct nv_swncq_port_priv *pp = ap->private_data;
- struct ata_prd *prd;
+ struct ata_bmdma_prd *prd;
unsigned int si, idx;
prd = pp->prd + ATA_MAX_PRD * qc->tag;
@@ -2092,7 +2088,7 @@ static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc)
struct nv_swncq_port_priv *pp = ap->private_data;
if (qc->tf.protocol != ATA_PROT_NCQ)
- return ata_sff_qc_issue(qc);
+ return ata_bmdma_qc_issue(qc);
DPRINTK("Enter\n");
@@ -2380,16 +2376,14 @@ static irqreturn_t nv_swncq_interrupt(int irq, void *dev_instance)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- if (ap->link.sactive) {
- nv_swncq_host_interrupt(ap, (u16)irq_stat);
- handled = 1;
- } else {
- if (irq_stat) /* reserve Hotplug */
- nv_swncq_irq_clear(ap, 0xfff0);
+ if (ap->link.sactive) {
+ nv_swncq_host_interrupt(ap, (u16)irq_stat);
+ handled = 1;
+ } else {
+ if (irq_stat) /* reserve Hotplug */
+ nv_swncq_irq_clear(ap, 0xfff0);
- handled += nv_host_intr(ap, (u8)irq_stat);
- }
+ handled += nv_host_intr(ap, (u8)irq_stat);
}
irq_stat >>= NV_INT_PORT_SHIFT_MCP55;
}
@@ -2479,8 +2473,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
- IRQF_SHARED, ipriv->sht);
+ return ata_pci_sff_activate_host(host, ipriv->irq_handler, ipriv->sht);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 5356ec0..f03ad48 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -333,7 +333,8 @@ static int pdc_common_port_start(struct ata_port *ap)
struct pdc_port_priv *pp;
int rc;
- rc = ata_port_start(ap);
+ /* we use the same prd table as bmdma, allocate it */
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
@@ -499,7 +500,7 @@ static int pdc_sata_scr_write(struct ata_link *link,
static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- dma_addr_t sg_table = ap->prd_dma;
+ dma_addr_t sg_table = ap->bmdma_prd_dma;
unsigned int cdb_len = qc->dev->cdb_len;
u8 *cdb = qc->cdb;
struct pdc_port_priv *pp = ap->private_data;
@@ -587,6 +588,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
static void pdc_fill_sg(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ struct ata_bmdma_prd *prd = ap->bmdma_prd;
struct scatterlist *sg;
const u32 SG_COUNT_ASIC_BUG = 41*4;
unsigned int si, idx;
@@ -613,8 +615,8 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc)
if ((offset + sg_len) > 0x10000)
len = 0x10000 - offset;
- ap->prd[idx].addr = cpu_to_le32(addr);
- ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
+ prd[idx].addr = cpu_to_le32(addr);
+ prd[idx].flags_len = cpu_to_le32(len & 0xffff);
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
idx++;
@@ -623,27 +625,27 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc)
}
}
- len = le32_to_cpu(ap->prd[idx - 1].flags_len);
+ len = le32_to_cpu(prd[idx - 1].flags_len);
if (len > SG_COUNT_ASIC_BUG) {
u32 addr;
VPRINTK("Splitting last PRD.\n");
- addr = le32_to_cpu(ap->prd[idx - 1].addr);
- ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
+ addr = le32_to_cpu(prd[idx - 1].addr);
+ prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
addr = addr + len - SG_COUNT_ASIC_BUG;
len = SG_COUNT_ASIC_BUG;
- ap->prd[idx].addr = cpu_to_le32(addr);
- ap->prd[idx].flags_len = cpu_to_le32(len);
+ prd[idx].addr = cpu_to_le32(addr);
+ prd[idx].flags_len = cpu_to_le32(len);
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
idx++;
}
- ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
static void pdc_qc_prep(struct ata_queued_cmd *qc)
@@ -658,7 +660,7 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc)
pdc_fill_sg(qc);
/*FALLTHROUGH*/
case ATA_PROT_NODATA:
- i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
+ i = pdc_pkt_header(&qc->tf, qc->ap->bmdma_prd_dma,
qc->dev->devno, pp->pkt);
if (qc->tf.flags & ATA_TFLAG_LBA48)
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
@@ -838,7 +840,7 @@ static void pdc_error_handler(struct ata_port *ap)
if (!(ap->pflags & ATA_PFLAG_FROZEN))
pdc_reset_port(ap);
- ata_std_error_handler(ap);
+ ata_sff_error_handler(ap);
}
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
@@ -984,8 +986,7 @@ static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
/* check for a plug or unplug event */
ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
tmp = hotplug_status & (0x11 << ata_no);
- if (tmp && ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
+ if (tmp) {
struct ata_eh_info *ehi = &ap->link.eh_info;
ata_ehi_clear_desc(ehi);
ata_ehi_hotplugged(ehi);
@@ -997,8 +998,7 @@ static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
/* check for a packet interrupt */
tmp = mask & (1 << (i + 1));
- if (tmp && ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
+ if (tmp) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->link.active_tag);
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 92ba45e..d533b3d 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -147,7 +147,6 @@ static struct ata_port_operations qs_ata_ops = {
.prereset = qs_prereset,
.softreset = ATA_OP_NULL,
.error_handler = qs_error_handler,
- .post_internal_cmd = ATA_OP_NULL,
.lost_interrupt = ATA_OP_NULL,
.scr_read = qs_scr_read,
@@ -255,7 +254,7 @@ static int qs_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
static void qs_error_handler(struct ata_port *ap)
{
qs_enter_reg_mode(ap);
- ata_std_error_handler(ap);
+ ata_sff_error_handler(ap);
}
static int qs_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
@@ -304,10 +303,8 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
VPRINTK("ENTER\n");
qs_enter_reg_mode(qc->ap);
- if (qc->tf.protocol != ATA_PROT_DMA) {
- ata_sff_qc_prep(qc);
+ if (qc->tf.protocol != ATA_PROT_DMA)
return;
- }
nelem = qs_fill_sg(qc);
@@ -404,26 +401,24 @@ static inline unsigned int qs_intr_pkt(struct ata_host *host)
u8 sHST = sff1 & 0x3f; /* host status */
unsigned int port_no = (sff1 >> 8) & 0x03;
struct ata_port *ap = host->ports[port_no];
+ struct qs_port_priv *pp = ap->private_data;
+ struct ata_queued_cmd *qc;
DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
sff1, sff0, port_no, sHST, sDST);
handled = 1;
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
- struct qs_port_priv *pp = ap->private_data;
- if (!pp || pp->state != qs_state_pkt)
- continue;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
- switch (sHST) {
- case 0: /* successful CPB */
- case 3: /* device error */
- qs_enter_reg_mode(qc->ap);
- qs_do_or_die(qc, sDST);
- break;
- default:
- break;
- }
+ if (!pp || pp->state != qs_state_pkt)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
+ switch (sHST) {
+ case 0: /* successful CPB */
+ case 3: /* device error */
+ qs_enter_reg_mode(qc->ap);
+ qs_do_or_die(qc, sDST);
+ break;
+ default:
+ break;
}
}
}
@@ -436,33 +431,30 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
unsigned int handled = 0, port_no;
for (port_no = 0; port_no < host->n_ports; ++port_no) {
- struct ata_port *ap;
- ap = host->ports[port_no];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
- struct qs_port_priv *pp;
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (!qc || !(qc->flags & ATA_QCFLAG_ACTIVE)) {
- /*
- * The qstor hardware generates spurious
- * interrupts from time to time when switching
- * in and out of packet mode.
- * There's no obvious way to know if we're
- * here now due to that, so just ack the irq
- * and pretend we knew it was ours.. (ugh).
- * This does not affect packet mode.
- */
- ata_sff_check_status(ap);
- handled = 1;
- continue;
- }
- pp = ap->private_data;
- if (!pp || pp->state != qs_state_mmio)
- continue;
- if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_sff_host_intr(ap, qc);
+ struct ata_port *ap = host->ports[port_no];
+ struct qs_port_priv *pp = ap->private_data;
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (!qc) {
+ /*
+ * The qstor hardware generates spurious
+ * interrupts from time to time when switching
+ * in and out of packet mode. There's no
+ * obvious way to know if we're here now due
+ * to that, so just ack the irq and pretend we
+ * knew it was ours.. (ugh). This does not
+ * affect packet mode.
+ */
+ ata_sff_check_status(ap);
+ handled = 1;
+ continue;
}
+
+ if (!pp || pp->state != qs_state_mmio)
+ continue;
+ if (!(qc->tf.flags & ATA_TFLAG_POLLING))
+ handled |= ata_sff_host_intr(ap, qc);
}
return handled;
}
@@ -509,11 +501,7 @@ static int qs_port_start(struct ata_port *ap)
void __iomem *mmio_base = qs_mmio_base(ap->host);
void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
u64 addr;
- int rc;
- rc = ata_port_start(ap);
- if (rc)
- return rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 3cb69d5..2dda312 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -284,7 +284,7 @@ static void sil_bmdma_setup(struct ata_queued_cmd *qc)
void __iomem *bmdma = ap->ioaddr.bmdma_addr;
/* load PRD table addr. */
- iowrite32(ap->prd_dma, bmdma + ATA_DMA_TABLE_OFS);
+ iowrite32(ap->bmdma_prd_dma, bmdma + ATA_DMA_TABLE_OFS);
/* issue r/w command */
ap->ops->sff_exec_command(ap, &qc->tf);
@@ -311,10 +311,10 @@ static void sil_fill_sg(struct ata_queued_cmd *qc)
{
struct scatterlist *sg;
struct ata_port *ap = qc->ap;
- struct ata_prd *prd, *last_prd = NULL;
+ struct ata_bmdma_prd *prd, *last_prd = NULL;
unsigned int si;
- prd = &ap->prd[0];
+ prd = &ap->bmdma_prd[0];
for_each_sg(qc->sg, sg, qc->n_elem, si) {
/* Note h/w doesn't support 64-bit, so we unconditionally
* truncate dma_addr_t to u32.
@@ -532,9 +532,6 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance)
struct ata_port *ap = host->ports[i];
u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
- if (unlikely(ap->flags & ATA_FLAG_DISABLED))
- continue;
-
/* turn off SATA_IRQ if not supported */
if (ap->flags & SIL_FLAG_NO_SATA_IRQ)
bmdma2 &= ~SIL_DMA_SATA_IRQ;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 433b6b8..e925051 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1160,13 +1160,8 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
for (i = 0; i < host->n_ports; i++)
if (status & (1 << i)) {
- struct ata_port *ap = host->ports[i];
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- sil24_host_intr(ap);
- handled++;
- } else
- printk(KERN_ERR DRV_NAME
- ": interrupt from disabled port %d\n", i);
+ sil24_host_intr(host->ports[i]);
+ handled++;
}
spin_unlock(&host->lock);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 7257f2d..101fd6a 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -224,7 +224,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
/* load PRD table addr. */
mb(); /* make sure PRD table writes are visible to controller */
- writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
+ writel(ap->bmdma_prd_dma, mmio + ATA_DMA_TABLE_OFS);
/* specify data direction, triple-check start bit is clear */
dmactl = readb(mmio + ATA_DMA_CMD);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 232468f..bedd518 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -302,11 +302,6 @@ static int pdc_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct pdc_port_priv *pp;
- int rc;
-
- rc = ata_port_start(ap);
- if (rc)
- return rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
@@ -840,8 +835,7 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
ap = host->ports[port_no];
tmp = mask & (1 << i);
VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp);
- if (tmp && ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
+ if (tmp && ap) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->link.active_tag);
@@ -927,7 +921,7 @@ static void pdc_error_handler(struct ata_port *ap)
if (!(ap->pflags & ATA_PFLAG_FROZEN))
pdc_reset_port(ap);
- ata_std_error_handler(ap);
+ ata_sff_error_handler(ap);
}
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 011e098..d8dac17 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -181,9 +181,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = ata_pci_bmdma_init(host);
- if (rc)
- return rc;
+ ata_pci_bmdma_init(host);
iomap = host->iomap;
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 8b2a278..2107952 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -284,14 +284,8 @@ static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
for (i = 0; i < host->n_ports; i++) {
u8 port_status = (status >> (8 * i)) & 0xff;
if (port_status) {
- struct ata_port *ap = host->ports[i];
-
- if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- vsc_port_intr(port_status, ap);
- handled++;
- } else
- dev_printk(KERN_ERR, host->dev,
- "interrupt from disabled port %d\n", i);
+ vsc_port_intr(port_status, host->ports[i]);
+ handled++;
}
}
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 520461b..b90c118 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4295,7 +4295,7 @@ static void ipr_slave_destroy(struct scsi_device *sdev)
res = (struct ipr_resource_entry *) sdev->hostdata;
if (res) {
if (res->sata_port)
- ata_port_disable(res->sata_port->ap);
+ res->sata_port->ap->link.device[0].class = ATA_DEV_NONE;
sdev->hostdata = NULL;
res->sdev = NULL;
res->sata_port = NULL;
@@ -5751,13 +5751,13 @@ static void ipr_ata_phy_reset(struct ata_port *ap)
rc = ipr_device_reset(ioa_cfg, res);
if (rc) {
- ata_port_disable(ap);
+ ap->link.device[0].class = ATA_DEV_NONE;
goto out_unlock;
}
ap->link.device[0].class = res->ata_class;
if (ap->link.device[0].class == ATA_DEV_UNKNOWN)
- ata_port_disable(ap);
+ ap->link.device[0].class = ATA_DEV_NONE;
out_unlock:
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 8228350..b71b6d4 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -818,7 +818,7 @@ void sas_slave_destroy(struct scsi_device *scsi_dev)
struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
if (dev_is_sata(dev))
- ata_port_disable(dev->sata_dev.ap);
+ dev->sata_dev.ap->link.device[0].class = ATA_DEV_NONE;
}
int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
new file mode 100644
index 0000000..f7dd576
--- /dev/null
+++ b/include/linux/ahci_platform.h
@@ -0,0 +1,29 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ * Jeff Garzik <jgarzik@...ox.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ * Anton Vorontsov <avorontsov@...mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#ifndef _AHCI_PLATFORM_H
+#define _AHCI_PLATFORM_H
+
+struct device;
+struct ata_port_info;
+
+struct ahci_platform_data {
+ int (*init)(struct device *dev);
+ void (*exit)(struct device *dev);
+ const struct ata_port_info *ata_port_info;
+ unsigned int force_port_map;
+ unsigned int mask_port_map;
+};
+
+#endif /* _AHCI_PLATFORM_H */
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 700c5b9..fe6e681 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -467,7 +467,7 @@ enum ata_ioctls {
/* core structures */
-struct ata_prd {
+struct ata_bmdma_prd {
__le32 addr;
__le32 flags_len;
};
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b2f2003..ee84e7e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -202,12 +202,6 @@ enum {
ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity
* led */
- /* The following flag belongs to ap->pflags but is kept in
- * ap->flags because it's referenced in many LLDs and will be
- * removed in not-too-distant future.
- */
- ATA_FLAG_DISABLED = (1 << 23), /* port is disabled, ignore it */
-
/* bits 24:31 of ap->flags are reserved for LLD specific flags */
@@ -256,12 +250,13 @@ enum {
ATA_TMOUT_INTERNAL_QUICK = 5000,
ATA_TMOUT_MAX_PARK = 30000,
- /* FIXME: GoVault needs 2s but we can't afford that without
- * parallel probing. 800ms is enough for iVDR disk
- * HHD424020F7SV00. Increase to 2secs when parallel probing
- * is in place.
+ /*
+ * GoVault needs 2s and iVDR disk HHD424020F7SV00 800ms. 2s
+ * is too much without parallel probing. Use 2s if parallel
+ * probing is available, 800ms otherwise.
*/
- ATA_TMOUT_FF_WAIT = 800,
+ ATA_TMOUT_FF_WAIT_LONG = 2000,
+ ATA_TMOUT_FF_WAIT = 800,
/* Spec mandates to wait for ">= 2ms" before checking status
* after reset. We wait 150ms, because that was the magic
@@ -721,15 +716,15 @@ struct ata_port {
unsigned int print_id; /* user visible unique port ID */
unsigned int port_no; /* 0 based port no. inside the host */
- struct ata_prd *prd; /* our SG list */
- dma_addr_t prd_dma; /* and its DMA mapping */
-
#ifdef CONFIG_ATA_SFF
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
-#endif /* CONFIG_ATA_SFF */
-
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
+ struct delayed_work sff_pio_task;
+ struct ata_bmdma_prd *bmdma_prd; /* BMDMA SG list */
+ dma_addr_t bmdma_prd_dma; /* and its DMA mapping */
+#endif /* CONFIG_ATA_SFF */
+
unsigned int pio_mask;
unsigned int mwdma_mask;
unsigned int udma_mask;
@@ -751,8 +746,6 @@ struct ata_port {
struct ata_host *host;
struct device *dev;
- void *port_task_data;
- struct delayed_work port_task;
struct delayed_work hotplug_task;
struct work_struct scsi_rescan_task;
@@ -849,6 +842,7 @@ struct ata_port_operations {
* SFF / taskfile oriented ops
*/
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
+ void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
u8 (*sff_check_status)(struct ata_port *ap);
u8 (*sff_check_altstatus)(struct ata_port *ap);
void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -857,16 +851,15 @@ struct ata_port_operations {
const struct ata_taskfile *tf);
unsigned int (*sff_data_xfer)(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
- u8 (*sff_irq_on)(struct ata_port *);
+ void (*sff_irq_on)(struct ata_port *);
bool (*sff_irq_check)(struct ata_port *);
void (*sff_irq_clear)(struct ata_port *);
+ void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
void (*bmdma_setup)(struct ata_queued_cmd *qc);
void (*bmdma_start)(struct ata_queued_cmd *qc);
void (*bmdma_stop)(struct ata_queued_cmd *qc);
u8 (*bmdma_status)(struct ata_port *ap);
-
- void (*drain_fifo)(struct ata_queued_cmd *qc);
#endif /* CONFIG_ATA_SFF */
ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -935,7 +928,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
return ap->ops == &ata_dummy_port_ops;
}
-extern void ata_port_probe(struct ata_port *);
extern int sata_set_spd(struct ata_link *link);
extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
@@ -950,7 +942,6 @@ extern int sata_link_hardreset(struct ata_link *link,
extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
-extern void ata_port_disable(struct ata_port *);
extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
@@ -1006,7 +997,6 @@ extern unsigned long ata_xfer_mode2mask(u8 xfer_mode);
extern int ata_xfer_mode2shift(unsigned long xfer_mode);
extern const char *ata_mode_string(unsigned long xfer_mask);
extern unsigned long ata_id_xfermask(const u16 *id);
-extern int ata_port_start(struct ata_port *ap);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
@@ -1039,9 +1029,6 @@ extern int ata_cable_sata(struct ata_port *ap);
extern int ata_cable_ignore(struct ata_port *ap);
extern int ata_cable_unknown(struct ata_port *ap);
-extern void ata_pio_queue_task(struct ata_port *ap, void *data,
- unsigned long delay);
-
/* Timing helpers */
extern unsigned int ata_pio_need_iordy(const struct ata_device *);
extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
@@ -1443,7 +1430,11 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
{
memset(tf, 0, sizeof(*tf));
+#ifdef CONFIG_ATA_SFF
tf->ctl = dev->link->ap->ctl;
+#else
+ tf->ctl = ATA_DEVCTL_OBS;
+#endif
if (dev->devno == 0)
tf->device = ATA_DEVICE_OBS;
else
@@ -1578,8 +1569,6 @@ extern const struct ata_port_operations ata_bmdma32_port_ops;
.sg_tablesize = LIBATA_MAX_PRD, \
.dma_boundary = ATA_DMA_BOUNDARY
-extern void ata_sff_qc_prep(struct ata_queued_cmd *qc);
-extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
extern void ata_sff_pause(struct ata_port *ap);
@@ -1597,10 +1586,11 @@ extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
-extern u8 ata_sff_irq_on(struct ata_port *ap);
+extern void ata_sff_irq_on(struct ata_port *ap);
extern void ata_sff_irq_clear(struct ata_port *ap);
extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq);
+extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
extern unsigned int ata_sff_host_intr(struct ata_port *ap,
@@ -1621,21 +1611,8 @@ extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
extern void ata_sff_error_handler(struct ata_port *ap);
-extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
-extern int ata_sff_port_start(struct ata_port *ap);
-extern int ata_sff_port_start32(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
-extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
- unsigned long xfer_mask);
-extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
-extern void ata_bmdma_start(struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
-extern u8 ata_bmdma_status(struct ata_port *ap);
-extern void ata_bus_reset(struct ata_port *ap);
-
#ifdef CONFIG_PCI
-extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
-extern int ata_pci_bmdma_init(struct ata_host *host);
extern int ata_pci_sff_init_host(struct ata_host *host);
extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
@@ -1648,6 +1625,23 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev,
struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
+extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
+extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern void ata_bmdma_error_handler(struct ata_port *ap);
+extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
+extern void ata_bmdma_start(struct ata_queued_cmd *qc);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
+extern u8 ata_bmdma_status(struct ata_port *ap);
+extern int ata_bmdma_port_start(struct ata_port *ap);
+extern int ata_bmdma_port_start32(struct ata_port *ap);
+
+#ifdef CONFIG_PCI
+extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
+extern void ata_pci_bmdma_init(struct ata_host *host);
+#endif /* CONFIG_PCI */
+
/**
* ata_sff_busy_wait - Wait for a port status register
* @ap: Port to wait for.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists