| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 7 Jun 2010 16:51:42 +0800
From: Mike Gilks <mike.kernel@...ksonline.com>
To: gregkh@...e.de, mchehab@...hat.com, julia@...u.dk, joe@...ches.com
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Mike Gilks <mike.kernel@...ksonline.com>
Subject: [PATCH 3/3] staging: rtl8192u: fix checkpatch.pl issues to line 3000 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 3000
Signed-off-by: Mike Gilks <mike.kernel@...ksonline.com>
---
drivers/staging/rtl8192u/r8192U_core.c | 54 +++++++++++++++++--------------
1 files changed, 30 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index b8ba05f..0f852ad 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2810,26 +2810,26 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev)
return Reval;
}
-void rtl8192_refresh_supportrate(struct r8192_priv* priv)
+void rtl8192_refresh_supportrate(struct r8192_priv *priv)
{
- struct ieee80211_device* ieee = priv->ieee80211;
+ struct ieee80211_device *ieee = priv->ieee80211;
/* we donot consider set support rate for ABG mode,
* only HT MCS rate is set here.
*/
- if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
- {
- memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
+ if (ieee->mode == WIRELESS_MODE_N_24G ||
+ ieee->mode == WIRELESS_MODE_N_5G) {
+ memcpy(ieee->Regdot11HTOperationalRateSet,
+ ieee->RegHTSuppRateSet, 16);
/* RT_DEBUG_DATA(COMP_INIT, ieee->RegHTSuppRateSet, 16); */
/* RT_DEBUG_DATA(COMP_INIT,
* ieee->Regdot11HTOperationalRateSet, 16);
*/
- }
- else
+ } else
memset(ieee->Regdot11HTOperationalRateSet, 0, 16);
return;
}
-u8 rtl8192_getSupportedWireleeMode(struct net_device*dev)
+u8 rtl8192_getSupportedWireleeMode(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 ret = 0;
@@ -2876,11 +2876,13 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
/* TODO: this function doesn't work well at this time,
* we should wait for FPGA
*/
- ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting );
+ ActUpdateChannelAccessSetting(pAdapter, pHalData->CurrentWirelessMode,
+ &pAdapter->MgntInfo.Info8185.ChannelAccessSetting);
#endif
priv->ieee80211->mode = wireless_mode;
- if ((wireless_mode == WIRELESS_MODE_N_24G) || (wireless_mode == WIRELESS_MODE_N_5G))
+ if ((wireless_mode == WIRELESS_MODE_N_24G) ||
+ (wireless_mode == WIRELESS_MODE_N_5G))
priv->ieee80211->pHTInfo->bEnableHT = 1;
else
priv->ieee80211->pHTInfo->bEnableHT = 0;
@@ -2889,7 +2891,7 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
}
/* init priv variables here. only non_zero value should be initialized here. */
-static void rtl8192_init_priv_variable(struct net_device* dev)
+static void rtl8192_init_priv_variable(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 i;
@@ -2897,13 +2899,13 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
priv->chan = 1; /* set to channel 1 */
priv->ieee80211->mode = WIRELESS_MODE_AUTO; /* SET AUTO */
priv->ieee80211->iw_mode = IW_MODE_INFRA;
- priv->ieee80211->ieee_up=0;
+ priv->ieee80211->ieee_up = 0;
priv->retry_rts = DEFAULT_RETRY_RTS;
priv->retry_data = DEFAULT_RETRY_DATA;
priv->ieee80211->rts = DEFAULT_RTS_THRESHOLD;
priv->ieee80211->rate = 110; /* 11 mbps */
priv->ieee80211->short_slot = 1;
- priv->promisc = (dev->flags & IFF_PROMISC) ? 1:0;
+ priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
priv->CckPwEnl = 6;
/* for silent reset */
priv->IrpPendingCount = 1;
@@ -2914,7 +2916,8 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
priv->ieee80211->FwRWRF = 0;
/* we don't use FW read/write RF until stable firmware is available. */
- priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL;
+ priv->ieee80211->current_network.beacon_interval =
+ DEFAULT_BEACONINTERVAL;
priv->ieee80211->iw_mode = IW_MODE_INFRA;
priv->ieee80211->softmac_features = IEEE_SOFTMAC_SCAN |
IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
@@ -2922,7 +2925,8 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
IEEE_SOFTMAC_BEACONS;
/* added by amy 080604 | IEEE_SOFTMAC_SINGLE_QUEUE; */
priv->ieee80211->active_scan = 1;
- priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION;
+ priv->ieee80211->modulation = IEEE80211_CCK_MODULATION |
+ IEEE80211_OFDM_MODULATION;
priv->ieee80211->host_encrypt = 1;
priv->ieee80211->host_decrypt = 1;
priv->ieee80211->start_send_beacons = NULL;
@@ -2948,14 +2952,14 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
priv->ieee80211->handle_beacon = rtl8192_handle_beacon;
/* added by david */
priv->ieee80211->GetNmodeSupportBySecCfg = GetNmodeSupportBySecCfg8192;
- priv->ieee80211->GetHalfNmodeSupportByAPsHandler = GetHalfNmodeSupportByAPs819xUsb;
+ priv->ieee80211->GetHalfNmodeSupportByAPsHandler =
+ GetHalfNmodeSupportByAPs819xUsb;
priv->ieee80211->SetWirelessMode = rtl8192_SetWirelessMode;
/* added by amy */
priv->ieee80211->InitialGainHandler = InitialGain819xUsb;
priv->card_type = USB;
#ifdef TO_DO_LIST
- if(Adapter->bInHctTest)
- {
+ if (Adapter->bInHctTest) {
pHalData->ShortRetryLimit = 7;
pHalData->LongRetryLimit = 7;
}
@@ -2967,7 +2971,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
priv->EarlyRxThreshold = 7;
priv->enable_gpio0 = 0;
priv->TransmitConfig =
- /* TCR_DurProcMode | */
+ /* TCR_DurProcMode | */
/* for RTL8185B, duration setting by HW */
/* ? TCR_DISReqQsize | */
(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|
@@ -2976,12 +2980,12 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
/* Short retry limit */
(priv->LongRetryLimit<<TCR_LRL_OFFSET) |
/* Long retry limit */
- (false ? TCR_SAT: 0);
+ (false ? TCR_SAT : 0);
/* FALSE: HW provies PLCP length and LENGEXT, TURE:
* SW proiveds them
*/
#ifdef TO_DO_LIST
- if(Adapter->bInHctTest)
+ if (Adapter->bInHctTest)
pHalData->ReceiveConfig = pHalData->CSMethod |
RCR_AMF | RCR_ADF |
/* RCR_AAP | */
@@ -3002,17 +3006,19 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
/* Max DMA Burst Size per Rx
* DMA Burst, 7: unlimited.
*/
- (pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) |
+ (pHalData->EarlyRxThreshold <<
+ RCR_FIFO_OFFSET) |
/* Rx FIFO Threshold, 7:
* No Rx threshold.
*/
- (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0);
+ (pHalData->EarlyRxThreshold ==
+ 7 ? RCR_OnlyErlPkt : 0);
else
#endif
priv->ReceiveConfig =
RCR_AMF | RCR_ADF | /* accept management/data */
- RCR_ACF |
+ RCR_ACF |
/* accept control frame for SW AP needs PS-poll,
* 2005.07.07, by rcnjko.
*/
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists