| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Jun 2010 15:39:35 +0200
From: Lazy <lazy404@...il.com>
To: linux-kernel@...r.kernel.org
Subject: 2.6.35-rc2 kernel crashes under heavy network load
Our linux router crashes while rebooting under heavy network load
(800kpps generated by pktgen on other machine).
While running everything system seams stable.
Any pointers what can I do to help resolve this issue ?
the system is Dell R210 X3420, 64bit kernel, debian 5.0 Broadcom BCM5716
same thing happens on a Dell R410 running same software Broadcom BCM5716
kernel version is Linux version 2.6.35-rc2 (root@...co3-2) (gcc
version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Fri Jun 11 10:22:51 CEST
2010
general protection fault: 0000 [#1] SMP
last sysfs file: /sys/devices/platform/dcdbas/smi_data_buf_phys_addr
CPU 1
Modules linked in: iTCO_wdt 8021q ipmi_poweroff ipmi_devintf ipmi_si
ipmi_msghandler mptctl loop ioatdma dca button evdev dcdbas raid10
raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq
async_tx raid1 raid0 linear md_mod sd_mod sg sr_mod cdrom
ide_pci_generic ide_core usbhid mptsas ata_piix mptscsih libata
mptbase scsi_transport_sas scsi_mod ehci_hcd uhci_hcd bnx2 fan [last
unloaded: scsi_wait_scan]
Pid: 20, comm: events/1 Not tainted 2.6.35-rc2 #2 0N051F/PowerEdge R410
RIP: 0010:[<ffffffff81087ae9>] [<ffffffff81087ae9>] drain_array+0x29/0xc7
RSP: 0000:ffff88012fb6ddc0 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0720072007200720 RSI: ffff88012fc04ec0 RDI: ffff88012fc1be00
RBP: ffff88012fb6de00 R08: 0000000000000000 R09: ffff88012fa91618
R10: 000000102cdbdd88 R11: 0000000000000000 R12: ffff88012fc04ec0
R13: 0720072007200720 R14: ffff88012fc04ec0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880001640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000f7592028 CR3: 0000000001355000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process events/1 (pid: 20, threadinfo ffff88012fb6c000, task ffff88012fb45270)
Stack:
0000000000011a00 ffff88012fb6dfd8 ffff88012fc1be00 000000000000f0c8
<0> ffff88012fc04ec0 ffff88012fc1be00 ffff8800016546c8 0000000000000000
<0> ffff88012fb6de60 ffffffff81087d63 000000000000f0c8 0000000000000014
Call Trace:
[<ffffffff81087d63>] cache_reap+0xdb/0x210
[<ffffffff81087c88>] ? cache_reap+0x0/0x210
[<ffffffff8103b1a4>] worker_thread+0xf4/0x177
[<ffffffff8103e360>] ? autoremove_wake_function+0x0/0x38
[<ffffffff8103b0b0>] ? worker_thread+0x0/0x177
[<ffffffff8103df46>] kthread+0x7d/0x85
[<ffffffff81002c34>] kernel_thread_helper+0x4/0x10
[<ffffffff8103dec9>] ? kthread+0x0/0x85
[<ffffffff81002c30>] ? kernel_thread_helper+0x0/0x10
Code: c9 c3 55 48 89 e5 41 57 45 89 c7 41 56 49 89 f6 41 55 49 89 d5
41 54 53 89 cb 48 83 ec 18 48 89 7d d0 48 85 d2 0f 84 8f 00 00 00 <83>
3a 00 0f 84 86 00 00 00 83 7a 0c 00 74 0d 85 c9 75 09 c7 42
RIP [<ffffffff81087ae9>] drain_array+0x29/0xc7
RSP <ffff88012fb6ddc0>
---[ end trace 8f60e60e5ac0b74b ]---
dmesg
Linux version 2.6.35-rc2 (root@...co3-2) (gcc version 4.3.2 (Debian
4.3.2-1.1) ) #2 SMP Fri Jun 11 10:22:51 CEST 2010
Command line: root=/dev/sda2 ro console=ttyS1,19200 console=tty0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 00000000bf699000 (usable)
BIOS-e820: 00000000bf699000 - 00000000bf6af000 (reserved)
BIOS-e820: 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
BIOS-e820: 00000000bf6ce000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask FC0000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf699 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fe710] fe710
init_memory_mapping: 0000000000000000-00000000bf699000
0000000000 - 00bf600000 page 2M
00bf600000 - 00bf699000 page 4k
kernel direct mapping tables up to bf699000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000240000000
0100000000 - 0240000000 page 2M
kernel direct mapping tables up to 240000000 @ b000-15000
RAMDISK: 37bcd000 - 37ff0000
ACPI: RSDP 00000000000f0b40 00024 (v02 DELL )
ACPI: XSDT 00000000000f0c40 0008C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bf6c3bb4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bf6af000 0398C (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000bf6c6000 00040
ACPI: APIC 00000000bf6c3478 00152 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bf6c35cc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bf6c3620 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DM__ 00000000bf6c365c 000A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bf6c3850 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bf6c3890 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bf6c39c8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bf6b2b0c 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bf6b2d7c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bf6b298c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bf6b29bc 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bf6c3b4c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Initmem setup node 0 0000000000000000-0000000240000000
NODE_DATA [0000000100000000 - 0000000100002fff]
[ffffea0000000000-ffffea0007dfffff] PMD ->
[ffff880100200000-ffff8801071fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00240000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000bf699
0: 0x00100000 -> 0x00240000
On node 0 totalpages: 2094644
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3939 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765649 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [3000 - 37ff]
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001600000 s75072 r8192 d23232 u262144
pcpu-alloc: s75072 r8192 d23232 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062388
Policy zone: Normal
Kernel command line: root=/dev/sda2 ro console=ttyS1,19200 console=tty0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Subtract (55 early reservations)
#1 [0001000000 - 0001447398] TEXT DATA BSS
#2 [0037bcd000 - 0037ff0000] RAMDISK
#3 [0001448000 - 000144832d] BRK
#4 [00000fe720 - 0000100000] BIOS reserved
#5 [00000fe710 - 00000fe720] MP-table mpf
#6 [000009cc00 - 00000f0000] BIOS reserved
#7 [00000f01f4 - 00000fe710] BIOS reserved
#8 [00000f0000 - 00000f01f4] MP-table mpc
#9 [0000001000 - 0000003000] TRAMPOLINE
#10 [0000008000 - 000000b000] PGTABLE
#11 [000000b000 - 0000010000] PGTABLE
#12 [0100000000 - 0100003000] NODE_DATA
#13 [0001448340 - 0001449340] BOOTMEM
#14 [00014473c0 - 00014477c0] BOOTMEM
#15 [0100003000 - 0100004000] BOOTMEM
#16 [0100004000 - 0100005000] BOOTMEM
#17 [0100200000 - 0107200000] MEMMAP 0
#18 [00014477c0 - 0001447940] BOOTMEM
#19 [0001449340 - 0001461340] BOOTMEM
#20 [0001461340 - 0001479340] BOOTMEM
#21 [000147a000 - 000147b000] BOOTMEM
#22 [0001447940 - 0001447981] BOOTMEM
#23 [00014479c0 - 0001447a03] BOOTMEM
#24 [0001447a40 - 0001447c38] BOOTMEM
#25 [0001447c40 - 0001447ca8] BOOTMEM
#26 [0001447cc0 - 0001447d28] BOOTMEM
#27 [0001447d40 - 0001447da8] BOOTMEM
#28 [0001447dc0 - 0001447e28] BOOTMEM
#29 [0001447e40 - 0001447ea8] BOOTMEM
#30 [0001447ec0 - 0001447f28] BOOTMEM
#31 [0001447f40 - 0001447fa8] BOOTMEM
#32 [0001479340 - 00014793a8] BOOTMEM
#33 [0001447fc0 - 0001447ff4] BOOTMEM
#34 [00014793c0 - 00014793f4] BOOTMEM
#35 [0001600000 - 000161a000] BOOTMEM
#36 [0001640000 - 000165a000] BOOTMEM
#37 [0001680000 - 000169a000] BOOTMEM
#38 [00016c0000 - 00016da000] BOOTMEM
#39 [0001700000 - 000171a000] BOOTMEM
#40 [0001740000 - 000175a000] BOOTMEM
#41 [0001780000 - 000179a000] BOOTMEM
#42 [00017c0000 - 00017da000] BOOTMEM
#43 [0001479400 - 0001479408] BOOTMEM
#44 [0001479440 - 0001479448] BOOTMEM
#45 [0001479480 - 00014794a0] BOOTMEM
#46 [00014794c0 - 0001479500] BOOTMEM
#47 [0001479500 - 0001479620] BOOTMEM
#48 [0001479640 - 0001479688] BOOTMEM
#49 [00014796c0 - 0001479708] BOOTMEM
#50 [000147b000 - 0001483000] BOOTMEM
#51 [00017da000 - 00057da000] BOOTMEM
#52 [0001483000 - 00014a3000] BOOTMEM
#53 [00014a3000 - 00014e3000] BOOTMEM
#54 [0000010000 - 0000018000] BOOTMEM
Memory: 8188188k/9437184k available (2384k kernel code, 1058608k
absent, 190388k reserved, 1253k data, 480k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.654 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5053.30 BogoMIPS (lpj=25266540)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (40430.64 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfdffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xdf0fa000-0xdf0fa3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xdf0fc000-0xdf0fc3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xecd0-0xecd7]
pci 0000:00:1f.2: reg 14: [io 0xecc8-0xeccb]
pci 0000:00:1f.2: reg 18: [io 0xecd8-0xecdf]
pci 0000:01:00.0: reg 10: [io 0xfc00-0xfcff]
pci 0000:01:00.0: reg 14: [mem 0xdf2ec000-0xdf2effff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xdf100000-0xdf1fffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:03.0: reg 10: [mem 0xd9800000-0xd9ffffff pref]
pci 0000:03:03.0: reg 14: [mem 0xde7fc000-0xde7fffff]
pci 0000:03:03.0: reg 18: [mem 0xde800000-0xdeffffff]
pci 0000:03:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff]
(subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LYD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:03:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c000 - 000000000009ffff
reserve RAM buffer: 00000000bf699000 - 00000000bfffffff
HPET: 8 timers in total, 6 timers will be used for per-cpu timer
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
hpet: hpet7 irq 45 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0880-0x08ff] has been reserved
system 00:07: [io 0x0900-0x091f] has been reserved
system 00:07: [io 0x0920-0x0923] has been reserved
system 00:07: [io 0x0924] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xfed50000-0xfed53fff] has been reserved
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:03:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff 64bit pref]
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:03: resource 2 [mem 0xd9800000-0xd9ffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:03.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4236k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800017da000 - ffff8800057da000
software IO TLB at phys 0x17da000 - 0x57da000
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16000
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 47 for MSI/MSI-X
ACPI: acpi_idle registered with cpuidle
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
rtc_cmos 00:04: setting system clock to 2010-06-16 13:00:38 UTC (1276693238)
Freeing unused kernel memory: 480k freed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.15 (May 4, 2010)
bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:02:00.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
SCSI subsystem initialized
bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0)
PCI Express found at mem da000000, IRQ 16, node addr 00:26:b9:7f:ec:f1
bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bnx2 0000:02:00.1: setting latency timer to 64
Fusion MPT base driver 3.04.15
Copyright (c) 1999-2008 LSI Corporation
libata version 3.00 loaded.
Fusion MPT SAS Host driver 3.04.15
mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
mptbase: ioc0: Initiating bringup
bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0)
PCI Express found at mem dc000000, IRQ 17, node addr 00:26:b9:7f:ec:f2
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fa000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fc000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part
ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
usb 1-1: new high speed USB device using ehci_hcd and address 2
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@...f0fe000 port 0xdf0fe100 irq 48
ata2: SATA max UDMA/133 abar m2048@...f0fe000 port 0xdf0fe180 irq 48
hub 1-1:1.0: USB hub found
ata3: SATA max UDMA/133 abar m2048@...f0fe000 port 0xdf0fe200 irq 48
ata4: SATA max UDMA/133 abar m2048@...f0fe000 port 0xdf0fe280 irq 48
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata5: SATA max UDMA/133 abar m2048@...f0fe000 port 0xdf0fe300 irq 48
ata6: SATA max UDMA/133 abar m2048@...f0fe000 port 0xdf0fe380 irq 48
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 2-1.2: new low speed USB device using ehci_hcd and address 3
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ioc0: LSISAS1068E B3: Capabilities={Initiator}
mptsas 0000:01:00.0: setting latency timer to 64
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, D250, max UDMA/100
ata4.00: applying bridge limits
ata4.00: configured for UDMA/100
input: BTC USB Multimedia Keyboard as /class/input/input0
generic-usb 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [BTC
USB Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input0
input: BTC USB Multimedia Keyboard as /class/input/input1
generic-usb 0003:046D:C312.0002: input: USB HID v1.10 Device [BTC USB
Multimedia Keyboard] on usb-0000:00:1d.0-1.2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 2-1.5: new high speed USB device using ehci_hcd and address 4
hub 2-1.5:1.0: USB hub found
hub 2-1.5:1.0: 4 ports detected
scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C D250 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
scsi6 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy 0,
sas_addr 0x1221000000000000
scsi 6:0:0:0: Direct-Access ATA WDC WD1600YS-18S 6C07 PQ: 0 ANSI: 5
scsi 6:0:0:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1,
sas_addr 0x1221000001000000
scsi 6:0:1:0: Direct-Access ATA WDC WD1600YS-18S 6C07 PQ: 0 ANSI: 5
scsi 6:0:1:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 6:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
scsi 6:1:0:0: Attached scsi generic sg3 type 0
sd 6:1:0:0: [sda] 311427072 512-byte logical blocks: (159 GB/148 GiB)
sd 6:1:0:0: [sda] Write Protect is off
sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 6:1:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 6:1:0:0: [sda] Attached SCSI disk
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
raid6: int64x1 1284 MB/s
raid6: int64x2 1385 MB/s
raid6: int64x4 1036 MB/s
raid6: int64x8 1331 MB/s
raid6: sse2x1 6619 MB/s
raid6: sse2x2 7739 MB/s
raid6: sse2x4 8980 MB/s
raid6: using algorithm sse2x4 (8980 MB/s)
xor: automatically using best checksumming function: generic_sse
generic_sse: 9958.000 MB/sec
xor: using function: generic_sse (9958.000 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
xor: automatically using best checksumming function: generic_sse
generic_sse: 9958.000 MB/sec
xor: using function: generic_sse (9958.000 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT3-fs (sda2): recovery required on readonly filesystem
EXT3-fs (sda2): write access will be enabled during recovery
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): recovery complete
EXT3-fs (sda2): mounted filesystem with ordered data mode
udevd version 125 started
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Power Button as /class/input/input2
ACPI: Power Button [PWRF]
EXT3-fs (sda2): using internal journal
loop: module loaded
Fusion MPT misc device (ioctl) driver 3.04.15
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address
0xca8, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100,
dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ipmi device interface
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
IPMI poweroff: ATCA Detect mfg 0x2A2 prod 0x100
IPMI poweroff: Found a chassis style poweroff function
802.1Q VLAN Support v1.8 Ben Greear <greearb@...delatech.com>
All bugs added by David S. Miller <davem@...hat.com>
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
IPv4 FIB: Using LC-trie version 0.409
bnx2 0000:02:00.0: irq 49 for MSI/MSI-X
bnx2 0000:02:00.0: irq 50 for MSI/MSI-X
bnx2 0000:02:00.0: irq 51 for MSI/MSI-X
bnx2 0000:02:00.0: irq 52 for MSI/MSI-X
bnx2 0000:02:00.0: irq 53 for MSI/MSI-X
bnx2 0000:02:00.0: irq 54 for MSI/MSI-X
bnx2 0000:02:00.0: irq 55 for MSI/MSI-X
bnx2 0000:02:00.0: irq 56 for MSI/MSI-X
bnx2 0000:02:00.0: irq 57 for MSI/MSI-X
bnx2 0000:02:00.0: eth0: using MSIX
bnx2 0000:02:00.1: irq 58 for MSI/MSI-X
bnx2 0000:02:00.1: irq 59 for MSI/MSI-X
bnx2 0000:02:00.1: irq 60 for MSI/MSI-X
bnx2 0000:02:00.1: irq 61 for MSI/MSI-X
bnx2 0000:02:00.1: irq 62 for MSI/MSI-X
bnx2 0000:02:00.1: irq 63 for MSI/MSI-X
bnx2 0000:02:00.1: irq 64 for MSI/MSI-X
bnx2 0000:02:00.1: irq 65 for MSI/MSI-X
bnx2 0000:02:00.1: irq 66 for MSI/MSI-X
bnx2 0000:02:00.1: eth1: using MSIX
bnx2 0000:02:00.1: eth1: NIC Copper Link is Up, 1000 Mbps full duplex,
receive & transmit flow control ON
bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex,
receive & transmit flow control ON
warning: `zebra' uses 32-bit capabilities (legacy support in use)
iTCO_wdt: Unexpected close, not stopping watchdog!
--
Michal Grzedzicki
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists