linux-kernel - Re: [ath5k-devel] [PATCH v2] ath5k: disable ASPM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 21 Jun 2010 13:37:04 -0700
From:	"Luis R. Rodriguez" <mcgrof@...il.com>
To:	Maxim Levitsky <maximlevitsky@...il.com>
Cc:	David Quan <David.Quan@...eros.com>,
	Bob Copeland <me@...copeland.com>,
	"Luis R. Rodriguez" <mcgrof@...badil.infradead.org>,
	Jussi Kivilinna <jussi.kivilinna@...et.fi>,
	ath5k-devel@...ts.ath5k.org, linux-wireless@...r.kernel.org,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Jonathan May <jonathan.may@...eros.com>
Subject: Re: [ath5k-devel] [PATCH v2] ath5k: disable ASPM

On Mon, Jun 21, 2010 at 1:16 PM, Maxim Levitsky <maximlevitsky@...il.com> wrote:
> Luis, let me explain again, exactly the situation:
>
> First of all AR5001 and AR5001X devices (former was usualy listed as
> AR2425, and I have it, later I don't know about much), don't work well
> with ASPM L0s enabled.

Thanks for the clarification. David, do you see this as well on your end?

> I told that many times, but I tell again.
> As soon as card it put on medium to high transmit load
> (for example even if transmission consists mostly of TCP ACK packets),
> it dies.
>
> Usualy it will stop transmitting, and then after few seconds it will
> send RXORN intrrupt to the host, even though the channel was idle.
> (Tested by sending a stream of UDP packets on channel that is neighbor
> free).
>
> I didn't see it, but some users reported seeing jumbo frames at this
> time as well.
> Overall it doesn't matter because card just goes south.
>
> A reset sometimes brings card to life, sometimes causes another storm of
> RXORN and sometimes just results in quiet dead card.
> A next reset might bring it to life, or not.
>
> Card (at least mine) advertises its as a 'pre pci 1.1 device'.
> Therefore if I enable CONFIG_PCIEASPM, the pci core will automaticly
> disable ASPM (both L0s and L1) on this card.
> I won't be surprised that windows does the same.

I am not sure when L0s was enabled as per the spec as mandatory, I
thought it was optional. Interesting to hear this behavior on Linux
with CONFIG_PCIEASPM. That Kconfig description and code really need
some spit shining.

> Therefore the patch I sent it useless because it only works when
> CONFIG_PCIEASPM is enabled.

How so ? Your patch disables L0s, I can use ASPM with L0s and L1 with
or without CONFIG_PCIEASPM. If I added your calls to ath9k I would
disable L0s.

  Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/