| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 07 Jul 2010 13:53:48 +0530
From: Trilok Soni <tsoni@...eaurora.org>
To: Gregory Bean <gbean@...eaurora.org>
CC: akpm@...ux-foundation.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org, khali@...ux-fr.org
Subject: Re: [PATCH] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
On 7/7/2010 4:07 AM, Gregory Bean wrote:
> Add support for Semtech SX150-series I2C GPIO expanders.
> Compatible models include:
>
> 8 bits: sx1508q
> 16 bits: sx1509q
>
> Signed-off-by: Gregory Bean <gbean@...eaurora.org>
Added linux-i2c and Jean Delvare for i2c bits, so not deleting any lines from the code.
> ---
> drivers/gpio/Kconfig | 11 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/sx150x.c | 720 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c/sx150x.h | 78 +++++
> 4 files changed, 810 insertions(+), 0 deletions(-)
> create mode 100644 drivers/gpio/sx150x.c
> create mode 100644 include/linux/i2c/sx150x.h
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 724038d..62d7758 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -195,6 +195,17 @@ config GPIO_PCF857X
> This driver provides an in-kernel interface to those GPIOs using
> platform-neutral GPIO calls.
>
> +config GPIO_SX150X
> + tristate "Semtech SX150x I2C GPIO expander"
> + depends on I2C
> + default n
> + help
> + Say yes here to provide support for Semtech SX150-series I2C
> + GPIO expanders. Compatible models include:
> +
> + 8 bits: sx1508q
> + 16 bits: sx1509q
> +
> config GPIO_TC35892
> bool "TC35892 GPIOs"
> depends on MFD_TC35892
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 51c3cdd..ccb804d 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -31,3 +31,4 @@ obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o
> obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
> obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o
> obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o
> +obj-$(CONFIG_GPIO_SX150X) += sx150x.o
> diff --git a/drivers/gpio/sx150x.c b/drivers/gpio/sx150x.c
> new file mode 100644
> index 0000000..0594150
> --- /dev/null
> +++ b/drivers/gpio/sx150x.c
> @@ -0,0 +1,720 @@
> +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +#include <linux/i2c/sx150x.h>
> +
> +struct sx150x_device_data {
> + u8 reg_pullup;
> + u8 reg_pulldn;
> + u8 reg_drain;
> + u8 reg_polarity;
> + u8 reg_dir;
> + u8 reg_data;
> + u8 reg_irq_mask;
> + u8 reg_irq_src;
> + u8 reg_sense;
> + u8 reg_clock;
> + u8 reg_misc;
> + u8 reg_reset;
> + u8 ngpios;
> +};
> +
> +/*
> + * irq_cmds:
> + *
> + * A bitmap containing all the commands issued by the interrupt system
> + * for processing by the work-queue once out of interrupt context.
> + * A nice, static bitmap avoids the risk of dynamic memory allocation
> + * and the bitmap is small enough that the wasted space of a worst-case
> + * allocation is minimal.
> + * Bits for each gpio are as follows:
> + *
> + * 0 - mask
> + * 1 - unmask
> + * 2 - sense rising edge
> + * 3 - sense falling edge
> + *
> + * Every group of four bits is for a unique gpio, so bits 0-3 are for IO
> + * pin 0, 4-7, for pin 1, &c.
> + */
> +enum {
> + CMD_MASK = 0,
> + CMD_UNMASK = 1,
> + CMD_RISING = 2,
> + CMD_FALLING = 3,
> + CMDS_PER_IO = 4,
> +};
> +
> +#define NCMDBITS (16 * CMDS_PER_IO)
> +
> +static inline unsigned cmd_bit(unsigned pin, unsigned cmd)
> +{
> + return pin * CMDS_PER_IO + cmd;
> +}
> +
> +struct sx150x_chip {
> + struct gpio_chip gpio_chip;
> + struct i2c_client *client;
> + const struct sx150x_device_data *dev_cfg;
> + struct mutex mutex;
> + int irq_summary;
> + int irq_base;
> + u32 irq_sense;
> + struct irq_chip irq_chip;
> + struct work_struct irq_mask_ws;
> + struct work_struct irq_unmask_ws;
> + struct work_struct irq_set_type_ws;
> + DECLARE_BITMAP(irq_cmds, NCMDBITS);
> +};
> +
> +static const struct sx150x_device_data sx150x_devices[] = {
> + [0] = { /* sx1508q */
> + .reg_pullup = 0x03,
> + .reg_pulldn = 0x04,
> + .reg_drain = 0x05,
> + .reg_polarity = 0x06,
> + .reg_dir = 0x07,
> + .reg_data = 0x08,
> + .reg_irq_mask = 0x09,
> + .reg_irq_src = 0x0c,
> + .reg_sense = 0x0b,
> + .reg_clock = 0x0f,
> + .reg_misc = 0x10,
> + .reg_reset = 0x7d,
> + .ngpios = 8
> + },
> + [1] = { /* sx1509q */
> + .reg_pullup = 0x07,
> + .reg_pulldn = 0x09,
> + .reg_drain = 0x0b,
> + .reg_polarity = 0x0d,
> + .reg_dir = 0x0f,
> + .reg_data = 0x11,
> + .reg_irq_mask = 0x13,
> + .reg_irq_src = 0x19,
> + .reg_sense = 0x17,
> + .reg_clock = 0x1e,
> + .reg_misc = 0x1f,
> + .reg_reset = 0x7d,
> + .ngpios = 16
> + },
> +};
> +
> +static const struct i2c_device_id sx150x_id[] = {
> + {"sx1508q", 0},
> + {"sx1509q", 1},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, sx150x_id);
> +
> +static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
> +{
> + s32 err = i2c_smbus_write_byte_data(client, reg, val);
> +
> + if (err < 0)
> + dev_warn(&client->dev,
> + "i2c write fail: can't write %02x to %02x: %d\n",
> + val, reg, err);
> + return err;
> +}
> +
> +static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
> +{
> + s32 err = i2c_smbus_read_byte_data(client, reg);
> +
> + if (err >= 0)
> + *val = err;
> + else
> + dev_warn(&client->dev,
> + "i2c read fail: can't read from %02x: %d\n",
> + reg, err);
> + return err;
> +}
> +
> +static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
> +{
> + return (chip->dev_cfg->ngpios == offset);
> +}
> +
> +/*
> + * These utility functions solve the common problem of locating and setting
> + * configuration bits. Configuration bits are grouped into registers
> + * whose indexes increase downwards. For example, with eight-bit registers,
> + * sixteen gpios would have their config bits grouped in the following order:
> + * REGISTER N-1 [ f e d c b a 9 8 ]
> + * N [ 7 6 5 4 3 2 1 0 ]
> + *
> + * For multi-bit configurations, the pattern gets wider:
> + * REGISTER N-3 [ f f e e d d c c ]
> + * N-2 [ b b a a 9 9 8 8 ]
> + * N-1 [ 7 7 6 6 5 5 4 4 ]
> + * N [ 3 3 2 2 1 1 0 0 ]
> + *
> + * Given the address of the starting register 'N', the index of the gpio
> + * whose configuration we seek to change, and the width in bits of that
> + * configuration, these functions allow us to locate the correct
> + * register and mask the correct bits.
> + */
> +static inline void sx150x_find_cfg(u8 offset, u8 width,
> + u8 *reg, u8 *mask, u8 *shift)
> +{
> + *reg -= offset * width / 8;
> + *mask = (1 << width) - 1;
> + *shift = (offset * width) % 8;
> + *mask <<= *shift;
> +}
> +
> +static s32 sx150x_write_cfg(struct sx150x_chip *chip,
> + u8 offset, u8 width, u8 reg, u8 val)
> +{
> + u8 mask;
> + u8 data;
> + u8 shift;
> + s32 err;
> +
> + sx150x_find_cfg(offset, width, ®, &mask, &shift);
> + err = sx150x_i2c_read(chip->client, reg, &data);
> + if (err < 0)
> + return err;
> +
> + data &= ~mask;
> + data |= (val << shift) & mask;
> + return sx150x_i2c_write(chip->client, reg, data);
> +}
> +
> +static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
> +{
> + u8 reg = chip->dev_cfg->reg_data;
> + u8 mask;
> + u8 data;
> + u8 shift;
> + s32 err;
> +
> + sx150x_find_cfg(offset, 1, ®, &mask, &shift);
> + mutex_lock(&chip->mutex);
> + err = sx150x_i2c_read(chip->client, reg, &data);
> + mutex_unlock(&chip->mutex);
> + if (err >= 0)
> + err = (data & mask) != 0 ? 1 : 0;
> +
> + return err;
> +}
> +
> +static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
> +{
> + mutex_lock(&chip->mutex);
> + sx150x_i2c_write(chip->client,
> + chip->dev_cfg->reg_clock,
> + (val ? 0x1f : 0x10));
> + mutex_unlock(&chip->mutex);
> +}
> +
> +static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val)
> +{
> + mutex_lock(&chip->mutex);
> + sx150x_write_cfg(chip,
> + offset,
> + 1,
> + chip->dev_cfg->reg_data,
> + (val ? 1 : 0));
> + mutex_unlock(&chip->mutex);
> +}
> +
> +static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset)
> +{
> + int err;
> +
> + mutex_lock(&chip->mutex);
> + err = sx150x_write_cfg(chip,
> + offset,
> + 1,
> + chip->dev_cfg->reg_dir,
> + 1);
> + mutex_unlock(&chip->mutex);
> + return err;
> +}
> +
> +static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val)
> +{
> + int err;
> +
> + mutex_lock(&chip->mutex);
> + err = sx150x_write_cfg(chip,
> + offset,
> + 1,
> + chip->dev_cfg->reg_data,
> + (val ? 1 : 0));
> + if (err >= 0)
> + err = sx150x_write_cfg(chip,
> + offset,
> + 1,
> + chip->dev_cfg->reg_dir,
> + 0);
> + mutex_unlock(&chip->mutex);
> + return err;
> +}
> +
> +static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset)
> +{
> + struct sx150x_chip *chip;
> +
> + chip = container_of(gc, struct sx150x_chip, gpio_chip);
> +
> + if (offset_is_oscio(chip, offset))
> + return -ENOTSUPP;
> + else
> + return sx150x_get_io(chip, offset);
> +}
> +
> +static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val)
> +{
> + struct sx150x_chip *chip;
> +
> + chip = container_of(gc, struct sx150x_chip, gpio_chip);
> +
> + if (offset_is_oscio(chip, offset))
> + sx150x_set_oscio(chip, val);
> + else
> + sx150x_set_io(chip, offset, val);
> +}
> +
> +static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
> +{
> + struct sx150x_chip *chip;
> +
> + chip = container_of(gc, struct sx150x_chip, gpio_chip);
> +
> + if (offset_is_oscio(chip, offset))
> + return -ENOTSUPP;
> + else
> + return sx150x_io_input(chip, offset);
> +}
> +
> +static int sx150x_gpio_direction_output(struct gpio_chip *gc,
> + unsigned offset,
> + int val)
> +{
> + struct sx150x_chip *chip;
> +
> + chip = container_of(gc, struct sx150x_chip, gpio_chip);
> +
> + if (offset_is_oscio(chip, offset))
> + return 0;
> + else
> + return sx150x_io_output(chip, offset, val);
> +}
> +
> +static int sx150x_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
> +{
> + struct sx150x_chip *chip;
> +
> + chip = container_of(gc, struct sx150x_chip, gpio_chip);
> +
> + if (offset >= chip->dev_cfg->ngpios)
> + return -EINVAL;
> +
> + if (chip->irq_base < 0)
> + return -ENOTSUPP;
> +
> + return chip->irq_base + offset;
> +}
> +
> +static void sx150x_irq_mask(unsigned int irq)
> +{
> + struct irq_chip *ic;
> + struct sx150x_chip *chip;
> +
> + ic = get_irq_chip(irq);
> + chip = container_of(ic, struct sx150x_chip, irq_chip);
> +
> + set_bit(cmd_bit(irq - chip->irq_base, CMD_MASK), chip->irq_cmds);
> + schedule_work(&chip->irq_mask_ws);
> +}
> +
> +static void sx150x_irq_mask_wfn(struct work_struct *work)
> +{
> + struct sx150x_chip *chip;
> + unsigned n;
> +
> + chip = container_of(work, struct sx150x_chip, irq_mask_ws);
> +
> + mutex_lock(&chip->mutex);
> + for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
> + if (test_and_clear_bit(cmd_bit(n, CMD_MASK),
> + chip->irq_cmds)) {
> + sx150x_write_cfg(chip, n, 1,
> + chip->dev_cfg->reg_irq_mask, 1);
> + sx150x_write_cfg(chip, n, 2,
> + chip->dev_cfg->reg_sense,
> + 0);
> + }
> + }
> + mutex_unlock(&chip->mutex);
> +}
Please explain why we are using workqueues for mask/unmasks hooks and irq thread context won't work?
> +
> +static void sx150x_irq_unmask(unsigned int irq)
> +{
> + struct irq_chip *ic;
> + struct sx150x_chip *chip;
> +
> + ic = get_irq_chip(irq);
> + chip = container_of(ic, struct sx150x_chip, irq_chip);
> +
> + set_bit(cmd_bit(irq - chip->irq_base, CMD_UNMASK), chip->irq_cmds);
> + schedule_work(&chip->irq_unmask_ws);
> +}
> +
> +static void sx150x_irq_unmask_wfn(struct work_struct *work)
> +{
> + struct sx150x_chip *chip;
> + unsigned n;
> +
> + chip = container_of(work, struct sx150x_chip, irq_unmask_ws);
> +
> + mutex_lock(&chip->mutex);
> + for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
> + if (test_and_clear_bit(cmd_bit(n, CMD_UNMASK),
> + chip->irq_cmds)) {
> + sx150x_write_cfg(chip, n, 1,
> + chip->dev_cfg->reg_irq_mask, 0);
> + sx150x_write_cfg(chip, n, 2,
> + chip->dev_cfg->reg_sense,
> + chip->irq_sense >> (n * 2));
> + }
> + }
> + mutex_unlock(&chip->mutex);
> +}
> +
> +static int sx150x_irq_set_type(unsigned int irq, unsigned int flow_type)
> +{
> + struct irq_chip *ic;
> + struct sx150x_chip *chip;
> + unsigned offset;
> +
> + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
> + return -EINVAL;
> +
> + ic = get_irq_chip(irq);
> + chip = container_of(ic, struct sx150x_chip, irq_chip);
> + offset = irq - chip->irq_base;
> +
> + if (flow_type & IRQ_TYPE_EDGE_RISING)
> + set_bit(cmd_bit(offset, CMD_RISING), chip->irq_cmds);
> + if (flow_type & IRQ_TYPE_EDGE_FALLING)
> + set_bit(cmd_bit(offset, CMD_FALLING), chip->irq_cmds);
> + schedule_work(&chip->irq_set_type_ws);
> +
> + return 0;
> +}
> +
> +static void sx150x_irq_set_type_wfn(struct work_struct *work)
> +{
> + struct sx150x_chip *chip;
> + unsigned n;
> + unsigned val;
> + int irq;
> +
> + chip = container_of(work, struct sx150x_chip, irq_set_type_ws);
> +
> + mutex_lock(&chip->mutex);
> + for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
> + val = 0;
> + if (test_and_clear_bit(cmd_bit(n, CMD_RISING),
> + chip->irq_cmds))
> + val |= 0x1;
> + if (test_and_clear_bit(cmd_bit(n, CMD_FALLING),
> + chip->irq_cmds))
> + val |= 0x2;
> +
> + chip->irq_sense &= ~(3UL << (n * 2));
> + chip->irq_sense |= val << (n * 2);
> +
> + irq = chip->irq_base + n;
> + if (!(irq_to_desc(irq)->status & IRQ_MASKED))
> + sx150x_write_cfg(chip, n, 2,
> + chip->dev_cfg->reg_sense, val);
> + }
> + mutex_unlock(&chip->mutex);
> +}
> +
> +static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
> +{
> + struct sx150x_chip *chip = (struct sx150x_chip *)dev_id;
> + int i;
> + unsigned n;
> + unsigned sub_irq;
> + u8 val;
> + unsigned nhandled = 0;
> +
> + mutex_lock(&chip->mutex);
> + for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
> + sx150x_i2c_read(chip->client,
> + chip->dev_cfg->reg_irq_src - i,
> + &val);
> + sx150x_i2c_write(chip->client,
> + chip->dev_cfg->reg_irq_src - i,
> + val);
> + for (n = 0; n < 8; ++n) {
> + if (val & (1 << n)) {
> + sub_irq = chip->irq_base + (i * 8) + n;
> + handle_nested_irq(sub_irq);
> + ++nhandled;
> + }
> + }
> + }
> + mutex_unlock(&chip->mutex);
> +
> + return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
> +}
> +
> +static void sx150x_init_chip(struct sx150x_chip *chip,
> + struct i2c_client *client,
> + kernel_ulong_t driver_data,
> + struct sx150x_platform_data *pdata)
> +{
> + mutex_init(&chip->mutex);
> +
> + chip->client = client;
> + chip->dev_cfg = &sx150x_devices[driver_data];
> + chip->gpio_chip.label = client->name;
> + chip->gpio_chip.direction_input = sx150x_gpio_direction_input;
> + chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
> + chip->gpio_chip.get = sx150x_gpio_get;
> + chip->gpio_chip.set = sx150x_gpio_set;
> + chip->gpio_chip.to_irq = sx150x_gpio_to_irq;
> + chip->gpio_chip.base = pdata->gpio_base;
> + chip->gpio_chip.can_sleep = 1;
> + chip->gpio_chip.ngpio = chip->dev_cfg->ngpios;
> + if (pdata->oscio_is_gpo)
> + ++chip->gpio_chip.ngpio;
> +
> + chip->irq_chip.name = client->name;
> + chip->irq_chip.mask = sx150x_irq_mask;
> + chip->irq_chip.unmask = sx150x_irq_unmask;
> + chip->irq_chip.set_type = sx150x_irq_set_type;
Why we are not using bus_lock/unlock hooks?
> + chip->irq_summary = -1;
> + chip->irq_base = -1;
> + chip->irq_sense = 0;
> +
> + bitmap_zero(chip->irq_cmds, NCMDBITS);
> +
> + INIT_WORK(&chip->irq_mask_ws, sx150x_irq_mask_wfn);
> + INIT_WORK(&chip->irq_unmask_ws, sx150x_irq_unmask_wfn);
> + INIT_WORK(&chip->irq_set_type_ws, sx150x_irq_set_type_wfn);
> +}
> +
> +static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
> +{
> + int err = 0;
> + unsigned n;
> +
> + for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
> + err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
> + return err;
> +}
> +
> +static int sx150x_init_hw(struct sx150x_chip *chip,
> + struct sx150x_platform_data *pdata)
> +{
> + int err = 0;
> +
> + err = i2c_smbus_write_word_data(chip->client,
> + chip->dev_cfg->reg_reset,
> + 0x3412);
> + if (err < 0)
> + return err;
> +
> + err = sx150x_i2c_write(chip->client,
> + chip->dev_cfg->reg_misc,
> + 0x01);
> + if (err < 0)
> + return err;
> +
> + err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup,
> + pdata->io_pullup_ena);
> + if (err < 0)
> + return err;
> +
> + err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn,
> + pdata->io_pulldn_ena);
> + if (err < 0)
> + return err;
> +
> + err = sx150x_init_io(chip, chip->dev_cfg->reg_drain,
> + pdata->io_open_drain_ena);
> + if (err < 0)
> + return err;
> +
> + err = sx150x_init_io(chip, chip->dev_cfg->reg_polarity,
> + pdata->io_polarity);
> + if (err < 0)
> + return err;
> +
> + if (pdata->oscio_is_gpo)
> + sx150x_set_oscio(chip, 0);
> +
> + return err;
> +}
> +
> +static int sx150x_install_irq_chip(struct sx150x_chip *chip,
> + int irq_summary,
> + int irq_base)
> +{
> + int err;
> + unsigned n;
> + unsigned irq;
> +
> + chip->irq_summary = irq_summary;
> + chip->irq_base = irq_base;
> +
> + for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
> + irq = irq_base + n;
> + set_irq_chip_and_handler(irq, &chip->irq_chip, handle_edge_irq);
> + set_irq_nested_thread(irq, 1);
> +#ifdef CONFIG_ARM
> + set_irq_flags(irq, IRQF_VALID);
> +#else
> + set_irq_noprobe(irq);
> +#endif
> + }
> +
> + err = request_threaded_irq(irq_summary,
> + NULL,
> + sx150x_irq_thread_fn,
> + IRQF_SHARED | IRQF_TRIGGER_FALLING,
> + chip->irq_chip.name,
> + chip);
> + if (err < 0) {
> + chip->irq_summary = -1;
> + chip->irq_base = -1;
> + }
> +
> + return err;
> +}
> +
> +static void sx150x_remove_irq_chip(struct sx150x_chip *chip)
> +{
> + unsigned n;
> + unsigned irq;
> +
> + free_irq(chip->irq_summary, chip);
> +
> + for (n = 0; n < chip->dev_cfg->ngpios; ++n) {
> + irq = gpio_to_irq(chip->gpio_chip.base + n);
> + set_irq_handler(irq, NULL);
> + set_irq_chip(irq, NULL);
> + }
> +}
> +
> +static int __devinit sx150x_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct sx150x_platform_data *pdata;
> + struct sx150x_chip *chip;
> + int rc;
> +
> + pdata = client->dev.platform_data;
> + if (!pdata)
> + return -EINVAL;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_BYTE_DATA))
> + return -ENOSYS;
> +
> + chip = kzalloc(sizeof(struct sx150x_chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + sx150x_init_chip(chip, client, id->driver_data, pdata);
> + rc = sx150x_init_hw(chip, pdata);
> + if (rc < 0)
> + goto probe_fail;
> +
> + rc = gpiochip_add(&chip->gpio_chip);
> + if (rc < 0)
> + goto probe_fail;
> +
> + i2c_set_clientdata(client, chip);
> +
> + if (pdata->irq_summary >= 0) {
> + rc = sx150x_install_irq_chip(chip,
> + pdata->irq_summary,
> + pdata->irq_base);
> + if (rc < 0)
> + goto probe_fail;
> + }
> +
> + return 0;
> +probe_fail:
> + kfree(chip);
> + return rc;
> +}
> +
> +static int __devexit sx150x_remove(struct i2c_client *client)
> +{
> + struct sx150x_chip *chip;
> + int rc;
> +
> + chip = i2c_get_clientdata(client);
> + rc = gpiochip_remove(&chip->gpio_chip);
> + if (rc < 0)
> + return rc;
> +
> + if (chip->irq_summary >= 0)
> + sx150x_remove_irq_chip(chip);
> +
> + flush_work(&chip->irq_mask_ws);
> + flush_work(&chip->irq_unmask_ws);
> + flush_work(&chip->irq_set_type_ws);
> + kfree(chip);
> +
> + return rc;
> +}
> +
> +static struct i2c_driver sx150x_driver = {
> + .driver = {
> + .name = "sx150x",
> + .owner = THIS_MODULE
> + },
> + .probe = sx150x_probe,
> + .remove = __devexit_p(sx150x_remove),
> + .id_table = sx150x_id,
> +};
> +
> +static int __init sx150x_init(void)
> +{
> + return i2c_add_driver(&sx150x_driver);
> +}
> +subsys_initcall(sx150x_init);
> +
> +static void __exit sx150x_exit(void)
> +{
> + return i2c_del_driver(&sx150x_driver);
> +}
> +module_exit(sx150x_exit);
> +
> +MODULE_AUTHOR("Gregory Bean <gbean@...eaurora.org>");
> +MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:sx150x");
> diff --git a/include/linux/i2c/sx150x.h b/include/linux/i2c/sx150x.h
> new file mode 100644
> index 0000000..ee3049c
> --- /dev/null
> +++ b/include/linux/i2c/sx150x.h
> @@ -0,0 +1,78 @@
> +/*
> + * Driver for the Semtech SX150x I2C GPIO Expanders
> + *
> + * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +#ifndef __LINUX_I2C_SX150X_H
> +#define __LINUX_I2C_SX150X_H
> +
> +/**
> + * struct sx150x_platform_data - config data for SX150x driver
> + * @gpio_base: The index number of the first GPIO assigned to this
> + * GPIO expander. The expander will create a block of
> + * consecutively numbered gpios beginning at the given base,
> + * with the size of the block depending on the model of the
> + * expander chip.
> + * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
> + * instead of as an oscillator, increasing the size of the
> + * GP(I)O pool created by this expander by one. The
> + * output-only GPO pin will be added at the end of the block.
> + * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
> + * for each IO line in the expander. Setting the bit at
> + * position n will enable the pull-up for the IO at
> + * the corresponding offset. For chips with fewer than
> + * 16 IO pins, high-end bits are ignored.
> + * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
> + * resistor for each IO line in the expander. Setting the
> + * bit at position n will enable the pull-down for the IO at
> + * the corresponding offset. For chips with fewer than
> + * 16 IO pins, high-end bits are ignored.
> + * @io_open_drain_ena: A bit-mask which enables-or disables open-drain
> + * operation for each IO line in the expander. Setting the
> + * bit at position n enables open-drain operation for
> + * the IO at the corresponding offset. Clearing the bit
> + * enables regular push-pull operation for that IO.
> + * For chips with fewer than 16 IO pins, high-end bits
> + * are ignored.
> + * @io_polarity: A bit-mask which enables polarity inversion for each IO line
> + * in the expander. Setting the bit at position n inverts
> + * the polarity of that IO line, while clearing it results
> + * in normal polarity. For chips with fewer than 16 IO pins,
> + * high-end bits are ignored.
> + * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
> + * is connected, via which it reports interrupt events
> + * across all GPIO lines. This must be a real,
> + * pre-existing IRQ line.
> + * Setting this value < 0 disables the irq_chip functionality
> + * of the driver.
> + * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
> + * IRQ lines will appear. Similarly to gpio_base, the expander
> + * will create a block of irqs beginning at this number.
> + * This value is ignored if irq_summary is < 0.
> + */
> +struct sx150x_platform_data {
> + unsigned gpio_base;
> + bool oscio_is_gpo;
> + u16 io_pullup_ena;
> + u16 io_pulldn_ena;
> + u16 io_open_drain_ena;
> + u16 io_polarity;
> + int irq_summary;
> + unsigned irq_base;
> +};
> +
> +#endif /* __LINUX_I2C_SX150X_H */
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists