[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-2.sd.rc1-686 (Debian 2.6.35-1~experimental.2+svn20100804.r16081+dileks.5) (sedat.dilek@gmail.com) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) #1 SMP Fri Aug 13 22:01:37 CEST 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ff60 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f5d1000 - 2ffc8000 [ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 3ff6a672 0004C (v01 IBM TP-1R 00003230 LTP 00000000) [ 0.000000] ACPI: FACP 3ff6a700 000F4 (v03 IBM TP-1R 00003230 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100428/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20100428/tbfadt-557) [ 0.000000] ACPI: DSDT 3ff6a8e7 0C530 (v01 IBM TP-1R 00003230 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ff78000 00040 [ 0.000000] ACPI: SSDT 3ff6a8b4 00033 (v01 IBM TP-1R 00003230 MSFT 0100000E) [ 0.000000] ACPI: ECDT 3ff76e17 00052 (v01 IBM TP-1R 00003230 IBM 00000001) [ 0.000000] ACPI: TCPA 3ff76e69 00032 (v01 IBM TP-1R 00003230 PTL 00000001) [ 0.000000] ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003230 LTP 00000001) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9/32 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #1 [0001000000 - 0001534c28] TEXT DATA BSS ==> [0001000000 - 0001534c28] [ 0.000000] #2 [002f5d1000 - 002ffc8000] RAMDISK ==> [002f5d1000 - 002ffc8000] [ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #4 [0001535000 - 000153b128] BRK ==> [0001535000 - 000153b128] [ 0.000000] #5 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] [ 0.000000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff60 [ 0.000000] On node 0 totalpages: 261886 [ 0.000000] free_area_init_node: node 0, pgdat c14156c0, node_mem_map c153d020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34387 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34816 r0 d22528 u4194304 [ 0.000000] pcpu-alloc: s34816 r0 d22528 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259839 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-2.sd.rc1-686 root=UUID=3e96e650-93d2-482b-89c7-de01e68d4180 ro nomodeset 3 quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff60) [ 0.000000] Memory: 1022884k/1047936k available (2523k kernel code, 24660k reserved, 1689k data, 388k init, 138632k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc141e000 - 0xc147f000 ( 388 kB) [ 0.000000] .data : 0xc1276e7c - 0xc141d540 (1689 kB) [ 0.000000] .text : 0xc1000000 - 0xc1276e7c (2523 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1694.295 MHz processor. [ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3388.59 BogoMIPS (lpj=6777180) [ 0.008015] pid_max: default: 32768 minimum: 301 [ 0.008058] Security Framework initialized [ 0.008071] SELinux: Disabled at boot. [ 0.008083] Mount-cache hash table entries: 512 [ 0.008283] Initializing cgroup subsys ns [ 0.008291] Initializing cgroup subsys cpuacct [ 0.008297] Initializing cgroup subsys devices [ 0.008301] Initializing cgroup subsys freezer [ 0.008304] Initializing cgroup subsys net_cls [ 0.008345] mce: CPU supports 5 MCE banks [ 0.008371] Performance Events: [ 0.008374] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008377] no hardware sampling interrupt available. [ 0.008379] p6 PMU driver. [ 0.008386] ... version: 0 [ 0.008388] ... bit width: 32 [ 0.008390] ... generic registers: 2 [ 0.008392] ... value mask: 00000000ffffffff [ 0.008395] ... max period: 000000007fffffff [ 0.008397] ... fixed-purpose events: 0 [ 0.008399] ... event mask: 0000000000000003 [ 0.008907] SMP alternatives: switching to UP code [ 0.013667] Freeing SMP alternatives: 16k freed [ 0.013676] ACPI: Core revision 20100428 [ 0.029696] ACPI: setting ELCR to 0200 (from 0800) [ 0.032084] weird, boot CPU (#0) not listed by the BIOS. [ 0.032087] SMP motherboard not detected. [ 0.032090] Local APIC not detected. Using dummy APIC emulation. [ 0.032092] SMP disabled [ 0.032281] Brought up 1 CPUs [ 0.032285] Total of 1 processors activated (3388.59 BogoMIPS). [ 0.036181] devtmpfs: initialized [ 0.036614] regulator: core version 0.5 [ 0.036662] NET: Registered protocol family 16 [ 0.036770] ACPI: bus type pci registered [ 0.037079] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 0.037082] PCI: Using configuration type 1 for base access [ 0.037530] bio: create slab at 0 [ 0.039205] ACPI: EC: EC description table is found, configuring boot EC [ 0.054540] ACPI: Interpreter enabled [ 0.054545] ACPI: (supports S0 S3 S4 S5) [ 0.054572] ACPI: Using PIC for interrupt routing [ 0.061844] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.061844] ACPI: Power Resource [PUBS] (on) [ 0.065123] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.065128] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.065157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.065213] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.065217] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.065220] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.065224] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.065228] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.065232] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) [ 0.065251] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.065363] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.065415] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.065466] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.065519] pci 0000:00:1d.7: reg 10: [mem 0xc0000000-0xc00003ff] [ 0.065576] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.065581] pci 0000:00:1d.7: PME# disabled [ 0.065669] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.065673] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO [ 0.065697] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.065704] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.065711] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.065719] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.065726] pci 0000:00:1f.1: reg 20: [io 0x1860-0x186f] [ 0.065733] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.065783] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f] [ 0.065822] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff] [ 0.065829] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff] [ 0.065836] pci 0000:00:1f.5: reg 18: [mem 0xc0000c00-0xc0000dff] [ 0.065843] pci 0000:00:1f.5: reg 1c: [mem 0xc0000800-0xc00008ff] [ 0.065872] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.065877] pci 0000:00:1f.5: PME# disabled [ 0.065903] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff] [ 0.065910] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f] [ 0.065946] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.065951] pci 0000:00:1f.6: PME# disabled [ 0.065985] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref] [ 0.065991] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff] [ 0.065997] pci 0000:01:00.0: reg 18: [mem 0xc0100000-0xc010ffff] [ 0.066012] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.066031] pci 0000:01:00.0: supports D1 D2 [ 0.066064] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.066068] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.066073] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] [ 0.066077] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref] [ 0.066112] pci 0000:02:00.0: reg 10: [mem 0xb0000000-0xb0000fff] [ 0.066131] pci 0000:02:00.0: supports D1 D2 [ 0.066134] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066139] pci 0000:02:00.0: PME# disabled [ 0.066169] pci 0000:02:00.1: reg 10: [mem 0xb1000000-0xb1000fff] [ 0.066187] pci 0000:02:00.1: supports D1 D2 [ 0.066190] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066195] pci 0000:02:00.1: PME# disabled [ 0.066234] pci 0000:02:01.0: reg 10: [mem 0xc0220000-0xc023ffff] [ 0.066241] pci 0000:02:01.0: reg 14: [mem 0xc0200000-0xc020ffff] [ 0.066249] pci 0000:02:01.0: reg 18: [io 0x8000-0x803f] [ 0.066268] pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.066292] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.066296] pci 0000:02:01.0: PME# disabled [ 0.066327] pci 0000:02:02.0: reg 10: [mem 0xc0210000-0xc021ffff] [ 0.066406] pci 0000:00:1e.0: PCI bridge to [bus 02-08] (subtractive decode) [ 0.066411] pci 0000:00:1e.0: bridge window [io 0x4000-0x8fff] [ 0.066417] pci 0000:00:1e.0: bridge window [mem 0xc0200000-0xcfffffff] [ 0.066422] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff pref] [ 0.066426] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.066429] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.066504] pci_bus 0000:00: on NUMA node 0 [ 0.066509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.066569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.066603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.071405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.071606] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.071806] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.072017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.072196] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.072375] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.072554] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.072755] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.072831] HEST: Table is not found! [ 0.072905] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.072909] vgaarb: loaded [ 0.072984] PCI: Using ACPI for IRQ routing [ 0.073118] PCI: pci_cache_line_size set to 64 bytes [ 0.073181] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.073185] reserve RAM buffer: 000000003ff60000 - 000000003fffffff [ 0.073315] Switching to clocksource tsc [ 0.074837] pnp: PnP ACPI init [ 0.074850] ACPI: bus type pnp registered [ 0.076000] ERROR: Unable to locate IOAPIC for GSI 13 [ 0.076000] ERROR: Unable to locate IOAPIC for GSI 8 [ 0.076000] ERROR: Unable to locate IOAPIC for GSI 1 [ 0.076000] ERROR: Unable to locate IOAPIC for GSI 12 [ 0.076000] ERROR: Unable to locate IOAPIC for GSI 6 [ 0.076000] ERROR: Unable to locate IOAPIC for GSI 4 [ 0.076093] ERROR: Unable to locate IOAPIC for GSI 7 [ 0.077489] pnp: PnP ACPI: found 13 devices [ 0.077492] ACPI: ACPI bus type pnp unregistered [ 0.077497] PnPBIOS: Disabled by ACPI PNP [ 0.077511] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.077515] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.077519] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.077523] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.077527] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.077531] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.077534] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.077538] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.077542] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.077546] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.077550] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.077553] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.077557] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved [ 0.077562] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.077570] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.077573] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.077577] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.077581] system 00:02: [io 0x1600-0x162f] has been reserved [ 0.077584] system 00:02: [io 0x1632-0x167f] has been reserved [ 0.077588] system 00:02: [io 0x1630-0x1631] has been reserved [ 0.112343] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] [ 0.112351] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff] [ 0.112356] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref] [ 0.112360] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.112364] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.112369] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff] [ 0.112373] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref] [ 0.112381] pci 0000:02:00.0: BAR 15: assigned [mem 0xe8000000-0xebffffff pref] [ 0.112385] pci 0000:02:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff] [ 0.112389] pci 0000:02:00.1: BAR 15: assigned [mem 0xec000000-0xefffffff pref] [ 0.112393] pci 0000:02:00.1: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.112397] pci 0000:02:01.0: BAR 6: assigned [mem 0xc0240000-0xc024ffff pref] [ 0.112400] pci 0000:02:00.0: BAR 13: assigned [io 0x4000-0x40ff] [ 0.112404] pci 0000:02:00.0: BAR 14: assigned [io 0x4400-0x44ff] [ 0.112407] pci 0000:02:00.1: BAR 13: assigned [io 0x4800-0x48ff] [ 0.112411] pci 0000:02:00.1: BAR 14: assigned [io 0x4c00-0x4cff] [ 0.112414] pci 0000:02:00.0: CardBus bridge to [bus 03-06] [ 0.112417] pci 0000:02:00.0: bridge window [io 0x4000-0x40ff] [ 0.112422] pci 0000:02:00.0: bridge window [io 0x4400-0x44ff] [ 0.112427] pci 0000:02:00.0: bridge window [mem 0xe8000000-0xebffffff pref] [ 0.112433] pci 0000:02:00.0: bridge window [mem 0xc4000000-0xc7ffffff] [ 0.112438] pci 0000:02:00.1: CardBus bridge to [bus 07-07] [ 0.112441] pci 0000:02:00.1: bridge window [io 0x4800-0x48ff] [ 0.112446] pci 0000:02:00.1: bridge window [io 0x4c00-0x4cff] [ 0.112451] pci 0000:02:00.1: bridge window [mem 0xec000000-0xefffffff pref] [ 0.112456] pci 0000:02:00.1: bridge window [mem 0xc8000000-0xcbffffff] [ 0.112461] pci 0000:00:1e.0: PCI bridge to [bus 02-08] [ 0.112466] pci 0000:00:1e.0: bridge window [io 0x4000-0x8fff] [ 0.112472] pci 0000:00:1e.0: bridge window [mem 0xc0200000-0xcfffffff] [ 0.112477] pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff pref] [ 0.112495] pci 0000:00:1e.0: setting latency timer to 64 [ 0.112857] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.112860] PCI: setting IRQ 11 as level-triggered [ 0.112866] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.113209] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.113213] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.113220] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.113224] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.113227] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.113230] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff] [ 0.113234] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref] [ 0.113237] pci_bus 0000:02: resource 0 [io 0x4000-0x8fff] [ 0.113240] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xcfffffff] [ 0.113243] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xefffffff pref] [ 0.113247] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.113250] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.113253] pci_bus 0000:03: resource 0 [io 0x4000-0x40ff] [ 0.113256] pci_bus 0000:03: resource 1 [io 0x4400-0x44ff] [ 0.113259] pci_bus 0000:03: resource 2 [mem 0xe8000000-0xebffffff pref] [ 0.113263] pci_bus 0000:03: resource 3 [mem 0xc4000000-0xc7ffffff] [ 0.113266] pci_bus 0000:07: resource 0 [io 0x4800-0x48ff] [ 0.113269] pci_bus 0000:07: resource 1 [io 0x4c00-0x4cff] [ 0.113272] pci_bus 0000:07: resource 2 [mem 0xec000000-0xefffffff pref] [ 0.113275] pci_bus 0000:07: resource 3 [mem 0xc8000000-0xcbffffff] [ 0.113321] NET: Registered protocol family 2 [ 0.113396] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.113739] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.115465] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.116622] TCP: Hash tables configured (established 131072 bind 65536) [ 0.116627] TCP reno registered [ 0.116633] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.116674] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.116885] NET: Registered protocol family 1 [ 0.117010] pci 0000:01:00.0: Boot video device [ 0.117028] PCI: CLS 32 bytes, default 64 [ 0.117113] Unpacking initramfs... [ 0.549706] Freeing initrd memory: 10204k freed [ 0.566184] Simple Boot Flag at 0x35 set to 0x1 [ 0.566520] audit: initializing netlink socket (disabled) [ 0.566542] type=2000 audit(1281773050.560:1): initialized [ 0.596349] highmem bounce pool size: 64 pages [ 0.596357] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.598345] VFS: Disk quotas dquot_6.5.2 [ 0.598423] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.598535] msgmni has been set to 1747 [ 0.598789] alg: No test for stdrng (krng) [ 0.598863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.598867] io scheduler noop registered [ 0.598869] io scheduler deadline registered (default) [ 0.599111] ERST: Table is not found! [ 0.599121] isapnp: Scanning for PnP cards... [ 0.951992] isapnp: No Plug & Play device found [ 0.953677] Linux agpgart interface v0.103 [ 0.953813] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 0.967244] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.967330] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.967423] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.967818] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.967920] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.967928] serial 0000:00:1f.6: PCI INT B disabled [ 0.968044] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.973630] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.973640] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.973755] mice: PS/2 mouse device common for all mice [ 0.973808] rtc_cmos 00:06: RTC can wake from S4 [ 0.973857] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.973875] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.973888] cpuidle: using governor ladder [ 0.973891] cpuidle: using governor menu [ 0.973896] No iBFT detected. [ 0.974241] TCP cubic registered [ 0.974417] NET: Registered protocol family 10 [ 0.974911] lo: Disabled Privacy Extensions [ 0.975209] Mobile IPv6 [ 0.975212] NET: Registered protocol family 17 [ 0.975232] Using IPI No-Shortcut mode [ 0.975306] PM: Resume from disk failed. [ 0.975319] registered taskstats version 1 [ 0.975571] rtc_cmos 00:06: setting system clock to 2010-08-14 08:04:11 UTC (1281773051) [ 0.975603] Initalizing network drop monitor service [ 0.975656] Freeing unused kernel memory: 388k freed [ 0.975924] Write protecting the kernel text: 2524k [ 0.975968] Write protecting the kernel read-only data: 1304k [ 0.977319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.048219] udev: starting version 160 [ 1.325570] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI [ 1.325574] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.325621] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.326008] Floppy drive(s): fd0 is 1.44M [ 1.326279] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.326289] ACPI: Thermal Zone [THM0] (54 C) [ 1.349930] FDC 0 is a National Semiconductor PC87306 [ 1.666285] usbcore: registered new interface driver usbfs [ 1.666437] usbcore: registered new interface driver hub [ 1.666502] usbcore: registered new device driver usb [ 1.671389] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.671755] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.672028] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 1.672395] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 1.672402] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 1.672428] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.672432] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.672461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.672497] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.676377] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.677638] SCSI subsystem initialized [ 1.682269] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 1.696054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.696111] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.696114] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.696118] usb usb1: Product: EHCI Host Controller [ 1.696121] usb usb1: Manufacturer: Linux 2.6.35-2.sd.rc1-686 ehci_hcd [ 1.696124] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.696313] hub 1-0:1.0: USB hub found [ 1.696320] hub 1-0:1.0: 6 ports detected [ 1.727755] libata version 3.00 loaded. [ 1.734044] ata_piix 0000:00:1f.1: version 2.13 [ 1.734061] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.734498] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 1.734505] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.734559] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.734646] scsi0 : ata_piix [ 1.734833] scsi1 : ata_piix [ 1.735864] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 1.735868] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 1.757561] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:0d:60:b0:62:87 [ 1.757569] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.776036] uhci_hcd: USB Universal Host Controller Interface driver [ 1.776290] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.776440] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.776451] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.776464] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.776469] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.776484] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.776514] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 1.776563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.776566] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.776570] usb usb2: Product: UHCI Host Controller [ 1.776573] usb usb2: Manufacturer: Linux 2.6.35-2.sd.rc1-686 uhci_hcd [ 1.776576] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.776826] hub 2-0:1.0: USB hub found [ 1.776832] hub 2-0:1.0: 2 ports detected [ 1.777053] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 1.777192] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 1.777549] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.777554] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.777561] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.777565] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.777578] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.777600] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 1.777639] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.777642] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.777646] usb usb3: Product: UHCI Host Controller [ 1.777649] usb usb3: Manufacturer: Linux 2.6.35-2.sd.rc1-686 uhci_hcd [ 1.777652] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.777844] hub 3-0:1.0: USB hub found [ 1.777850] hub 3-0:1.0: 2 ports detected [ 1.777910] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.777918] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.777921] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.777930] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.777952] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 1.777986] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.777989] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.777992] usb usb4: Product: UHCI Host Controller [ 1.777995] usb usb4: Manufacturer: Linux 2.6.35-2.sd.rc1-686 uhci_hcd [ 1.777999] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.778185] hub 4-0:1.0: USB hub found [ 1.778190] hub 4-0:1.0: 2 ports detected [ 1.900318] ata2.01: NODEV after polling detection [ 1.900667] ata1.00: HPA detected: current 110257519, native 117210240 [ 1.900673] ata1.00: ATA-6: HTS726060M9AT00, MH4OA6BA, max UDMA/100 [ 1.900677] ata1.00: 110257519 sectors, multi 16: LBA [ 1.908621] ata2.00: ATAPI: UJDA755yDVD/CDRW, 1.70, max UDMA/33 [ 1.916553] ata1.00: configured for UDMA/100 [ 1.916698] scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5 [ 1.924559] ata2.00: configured for UDMA/33 [ 1.927385] scsi 1:0:0:0: CD-ROM MATSHITA UJDA755yDVD/CDRW 1.70 PQ: 0 ANSI: 5 [ 1.959286] sd 0:0:0:0: [sda] 110257519 512-byte logical blocks: (56.4 GB/52.5 GiB) [ 1.959347] sd 0:0:0:0: [sda] Write Protect is off [ 1.959351] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.959376] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.959538] sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.965213] Uniform CD-ROM driver Revision: 3.20 [ 1.965517] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.974240] sda1 sda2 sda3 sda4 < sda5 > [ 2.005767] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.020224] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.020883] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.220028] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.396619] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e [ 2.396623] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.396626] usb 3-1: Product: USB-PS/2 Optical Mouse [ 2.396629] usb 3-1: Manufacturer: Logitech [ 2.421895] usbcore: registered new interface driver hiddev [ 2.435115] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input1 [ 2.435283] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0 [ 2.435447] usbcore: registered new interface driver usbhid [ 2.435449] usbhid: USB HID core driver [ 2.566347] device-mapper: uevent: version 1.0.3 [ 2.566959] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 2.575615] PM: Starting manual resume from disk [ 2.575621] PM: Resume from partition 8:2 [ 2.575623] PM: Checking hibernation image. [ 2.575809] PM: Error -22 checking image file [ 2.575811] PM: Resume from disk failed. [ 2.606814] EXT3-fs (sda5): recovery required on readonly filesystem [ 2.606819] EXT3-fs (sda5): write access will be enabled during recovery [ 2.622717] EXT3-fs: barriers not enabled [ 2.980569] kjournald starting. Commit interval 5 seconds [ 2.980601] EXT3-fs (sda5): recovery complete [ 2.981227] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 4.897877] udev: starting version 160 [ 5.653347] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 5.653592] ACPI: Lid Switch [LID] [ 5.654088] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 5.654097] ACPI: Sleep Button [SLPB] [ 5.654249] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.654254] ACPI: Power Button [PWRF] [ 5.720825] ACPI: AC Adapter [AC] (on-line) [ 5.728681] ACPI: acpi_idle registered with cpuidle [ 5.743725] ACPI: Battery Slot [BAT0] (battery present) [ 5.745169] Marking TSC unstable due to TSC halts in idle [ 5.746739] Switching to clocksource acpi_pm [ 5.824191] Non-volatile memory driver v1.3 [ 5.879360] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.021998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.039164] NET: Registered protocol family 23 [ 6.074706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.138469] parport_pc 00:0b: reported by Plug and Play ACPI [ 6.138514] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 6.161990] intel_rng: FWH not detected [ 6.234068] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input6 [ 6.234182] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 6.263788] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 6.319315] nsc-ircc 00:0c: activated [ 6.319484] nsc-ircc, chip->init [ 6.319493] nsc-ircc, Found chip at base=0x02e [ 6.319517] nsc-ircc, driver loaded (Dag Brattli) [ 6.320835] IrDA: Registered device irda0 [ 6.320839] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 6.508622] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512] [ 6.508641] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI [ 6.508644] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI [ 6.508650] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64 [ 6.595877] cfg80211: Calling CRDA to update world regulatory domain [ 6.622464] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 6.622468] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.622471] thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04 [ 6.622474] thinkpad_acpi: IBM ThinkPad T40p, model 2374SG6 [ 6.623632] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 6.632108] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 6.632833] Registered led device: tpacpi::thinklight [ 6.633075] Registered led device: tpacpi::power [ 6.633471] Registered led device: tpacpi::standby [ 6.642991] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 6.649071] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 6.716690] [drm] Initialized drm 1.1.0 20060810 [ 6.735200] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0 [ 6.735205] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 6.740742] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11 [ 6.740746] yenta_cardbus 0000:02:00.0: Socket status: 30000006 [ 6.740758] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x8fff] [ 6.740763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f [ 6.756087] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff] [ 6.756092] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff [ 6.756120] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref] [ 6.756124] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff [ 6.756517] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512] [ 6.756535] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI [ 6.756538] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI [ 6.756544] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64 [ 6.781207] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 6.988735] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11 [ 6.988740] yenta_cardbus 0000:02:00.1: Socket status: 30000006 [ 6.988752] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [io 0x4000-0x8fff] [ 6.988757] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f [ 7.003581] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xcfffffff] [ 7.003586] pcmcia_socket pcmcia_socket1: cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc09fffff 0xc3a00000-0xcc1fffff 0xcfa00000-0xd01fffff [ 7.003614] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xe8000000-0xefffffff pref] [ 7.003618] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff [ 7.374619] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 [ 7.375649] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 7.376124] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 7.376508] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 7.376926] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff [ 7.376988] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 7.377049] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean. [ 7.377115] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 7.378280] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 [ 7.379303] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 7.379753] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 7.380162] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 7.380579] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff [ 7.380640] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 7.380701] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 7.380766] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.387645] ath5k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.387724] ath5k 0000:02:02.0: registered as 'phy0' [ 7.686885] [drm] radeon kernel modesetting enabled. [ 7.687055] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 7.687093] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 7.687104] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 7.691746] [drm] initializing kernel modesetting (RV250 0x1002:0x4C66). [ 7.691937] [drm] register mmio base: 0xC0100000 [ 7.691940] [drm] register mmio size: 65536 [ 7.692420] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 7.692440] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 7.692478] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 7.692506] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF [ 7.692516] radeon 0000:01:00.0: VRAM: 64M 0xE0000000 - 0xE3FFFFFF (64M used) [ 7.692553] [drm] radeon: irq initialized. [ 7.693252] [drm] Detected VRAM RAM=64M, BAR=128M [ 7.693256] [drm] RAM width 128bits DDR [ 7.693357] [TTM] Zone kernel: Available graphics memory: 447430 kiB. [ 7.693360] [TTM] Zone highmem: Available graphics memory: 516746 kiB. [ 7.693363] [TTM] Initializing pool allocator. [ 7.693390] [drm] radeon: 64M of VRAM memory ready [ 7.693393] [drm] radeon: 256M of GTT memory ready. [ 7.693713] [drm] Loading R200 Microcode [ 7.733379] ath: EEPROM regdomain: 0x61 [ 7.733383] ath: EEPROM indicates we should expect a direct regpair map [ 7.733390] ath: Country alpha2 being used: 00 [ 7.733393] ath: Regpair used: 0x61 [ 7.852993] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 7.853059] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 7.886354] phy0: Selected rate control algorithm 'minstrel' [ 7.887223] Registered led device: ath5k-phy0::rx [ 7.887242] Registered led device: ath5k-phy0::tx [ 7.887246] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 7.887250] ath5k phy0: RF5111 5GHz radio found (0x17) [ 7.887253] ath5k phy0: RF2111 2GHz radio found (0x23) [ 7.893825] [drm] radeon: ring at 0x00000000D0000000 [ 7.893848] [drm] ring test succeeded in 1 usecs [ 7.894121] [drm] radeon: ib pool ready. [ 7.894236] [drm] ib test succeeded in 0 usecs [ 7.894376] [drm] DFP table revision: 3 [ 7.894424] [drm] Panel ID String: SXGA+ Single (85MHz) [ 7.894426] [drm] Panel Size 1400x1050 [ 7.894461] [drm] Default TV standard: NTSC [ 7.894464] [drm] 27.000000000 MHz TV ref clk [ 7.894466] [drm] No TV DAC info found in BIOS [ 7.894469] [drm] Default TV standard: NTSC [ 7.894471] [drm] 27.000000000 MHz TV ref clk [ 7.894502] [drm] Radeon Display Connectors [ 7.894504] [drm] Connector 0: [ 7.894506] [drm] VGA [ 7.894509] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 7.894511] [drm] Encoders: [ 7.894513] [drm] CRT1: INTERNAL_DAC1 [ 7.894516] [drm] Connector 1: [ 7.894517] [drm] DVI-D [ 7.894519] [drm] HPD1 [ 7.894522] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 7.894524] [drm] Encoders: [ 7.894526] [drm] DFP1: INTERNAL_TMDS1 [ 7.894528] [drm] Connector 2: [ 7.894530] [drm] LVDS [ 7.894532] [drm] Encoders: [ 7.894534] [drm] LCD1: INTERNAL_LVDS [ 7.894536] [drm] Connector 3: [ 7.894537] [drm] S-video [ 7.894539] [drm] Encoders: [ 7.894541] [drm] TV1: INTERNAL_DAC2 [ 7.906058] [drm] radeon: power management initialized [ 8.001379] [drm] fb mappable at 0xE0040000 [ 8.001383] [drm] vram apper at 0xE0000000 [ 8.001386] [drm] size 5914624 [ 8.001388] [drm] fb depth is 24 [ 8.001390] [drm] pitch is 5632 [ 8.070168] Console: switching to colour frame buffer device 175x65 [ 8.105153] fb0: radeondrmfb frame buffer device [ 8.105156] drm: registered panic notifier [ 8.105686] Slow work thread pool: Starting up [ 8.105819] Slow work thread pool: Ready [ 8.105827] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0 [ 8.776033] intel8x0_measure_ac97_clock: measured 55378 usecs (2668 samples) [ 8.776037] intel8x0: clocking to 48000 [ 8.777365] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 8.777391] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 [ 9.783151] Adding 1052252k swap on /dev/sda2. Priority:-1 extents:1 across:1052252k [ 10.021215] EXT3-fs (sda5): using internal journal [ 11.113914] fuse init (API version 7.14) [ 11.554382] EXT4-fs (sda3): recovery complete [ 11.554688] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 12.816572] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.011154] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 13.233375] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 18.261578] wlan0: direct probe to 00:04:0e:e4:00:3d (try 1) [ 18.264036] wlan0: direct probe responded [ 18.264045] wlan0: authenticate with 00:04:0e:e4:00:3d (try 1) [ 18.266293] wlan0: authenticated [ 18.266306] wlan0: associate with 00:04:0e:e4:00:3d (try 1) [ 18.270526] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 18.270529] wlan0: associated [ 18.271312] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.321784] padlock: VIA PadLock not detected. [ 25.804471] lp0: using parport0 (interrupt-driven). [ 25.929569] ppdev: user-space parallel port driver [ 26.159157] Bluetooth: Core ver 2.15 [ 26.159187] NET: Registered protocol family 31 [ 26.159190] Bluetooth: HCI device and connection manager initialized [ 26.159193] Bluetooth: HCI socket layer initialized [ 26.227443] Bluetooth: L2CAP ver 2.14 [ 26.227447] Bluetooth: L2CAP socket layer initialized [ 26.331486] Bluetooth: RFCOMM TTY layer initialized [ 26.331491] Bluetooth: RFCOMM socket layer initialized [ 26.331494] Bluetooth: RFCOMM ver 1.11 [ 26.640175] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.640179] Bluetooth: BNEP filters: protocol multicast [ 26.909066] Bluetooth: SCO (Voice Link) ver 0.6 [ 26.909069] Bluetooth: SCO socket layer initialized [ 28.288028] wlan0: no IPv6 routers present [ 28.602899] P-state transition latency capped at 20 uS