lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Sun, 22 Aug 2010 01:53:41 -0600
From:	Thomas Fjellstrom <thomas@...llstrom.ca>
To:	linux-wireless@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org
Subject: Re: ath5k problem with 2.6.35

On August 22, 2010, Thomas Fjellstrom wrote:
> Hi, I'm running 2.6.35, and my wireless card fails to initialize properly
> on boot. I get the following messages in dmesg:

Probably important, but I missed a couple lines:
 
> [    0.866525] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ
> 17 [    0.866536] ath5k 0000:02:00.0: setting latency timer to 64
> [    0.866571] ath5k 0000:02:00.0: registered as 'phy0'
> [    1.358241] ath: EEPROM regdomain: 0x67
> [    1.358242] ath: EEPROM indicates we should expect a direct regpair map
> [    1.358245] ath: Country alpha2 being used: 00
> [    1.358247] ath: Regpair used: 0x67
   [    1.360589] phy0: Failed to initialize wep: -2
> [    1.372021] ath5k phy0: can't register ieee80211 hw
> [    1.372080] ath5k 0000:02:00.0: PCI INT A disabled
> [    1.372084] ath5k: probe of 0000:02:00.0 failed with error -2
>
> That said, if I remove the ath5k module, and modprobe ath5k, it starts
> working.
> 
> [ 2976.411770] ath5k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ
> 17 [ 2976.411783] ath5k 0000:02:00.0: setting latency timer to 64
> [ 2976.412767] ath5k 0000:02:00.0: registered as 'phy1'
> [ 2976.912422] ath: EEPROM regdomain: 0x67
> [ 2976.912424] ath: EEPROM indicates we should expect a direct regpair map
> [ 2976.912427] ath: Country alpha2 being used: 00
> [ 2976.912429] ath: Regpair used: 0x67
   [ 2977.078747] phy1: Selected rate control algorithm 'minstrel'
> [ 2977.079190] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
> 
> Is this a known issue?

Thanks

-- 
Thomas Fjellstrom
thomas@...llstrom.ca
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ