| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 16 Sep 2010 08:49:57 -0700
From: Guenter Roeck <guenter.roeck@...csson.com>
To: Jean Delvare <khali@...ux-fr.org>
CC: Randy Dunlap <rdunlap@...otime.net>,
"Ira W. Snyder" <iws@...o.caltech.edu>, lm-sensors@...sensors.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
Guenter Roeck <guenter.roeck@...csson.com>
Subject: [PATCH v2 1/2] hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval
The attribute reflects an interval, not a rate.
Signed-off-by: Guenter Roeck <guenter.roeck@...csson.com>
Acked-by: Ira W. Snyder <iws@...o.caltech.edu>
---
v2: Modified sysfs-interface text
Documentation/hwmon/sysfs-interface | 9 +++----
drivers/hwmon/adm1031.c | 43 +++++++++++++++++++---------------
2 files changed, 28 insertions(+), 24 deletions(-)
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index ff45d1f..dcb7636 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -91,12 +91,11 @@ name The chip name.
I2C devices get this attribute created automatically.
RO
-update_rate The rate at which the chip will update readings.
- Unit: millisecond
+update_interval The interval at which the chip will update readings.
+ Unit: milliseconds
RW
- Some devices have a variable update rate. This attribute
- can be used to change the update rate to the desired
- frequency.
+ Some devices have a variable update rate or interval.
+ This attribute can be used to change it to the desired value.
************
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 15c1a96..0683e6b 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -79,7 +79,7 @@ struct adm1031_data {
int chip_type;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
- unsigned int update_rate; /* In milliseconds */
+ unsigned int update_interval; /* In milliseconds */
/* The chan_select_table contains the possible configurations for
* auto fan control.
*/
@@ -743,23 +743,23 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
-/* Update Rate */
-static const unsigned int update_rates[] = {
+/* Update Interval */
+static const unsigned int update_intervals[] = {
16000, 8000, 4000, 2000, 1000, 500, 250, 125,
};
-static ssize_t show_update_rate(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t show_update_interval(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1031_data *data = i2c_get_clientdata(client);
- return sprintf(buf, "%u\n", data->update_rate);
+ return sprintf(buf, "%u\n", data->update_interval);
}
-static ssize_t set_update_rate(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t set_update_interval(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1031_data *data = i2c_get_clientdata(client);
@@ -771,12 +771,15 @@ static ssize_t set_update_rate(struct device *dev,
if (err)
return err;
- /* find the nearest update rate from the table */
- for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) {
- if (val >= update_rates[i])
+ /*
+ * Find the nearest update interval from the table.
+ * Use it to determine the matching update rate.
+ */
+ for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) {
+ if (val >= update_intervals[i])
break;
}
- /* if not found, we point to the last entry (lowest update rate) */
+ /* if not found, we point to the last entry (lowest update interval) */
/* set the new update rate while preserving other settings */
reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
@@ -785,14 +788,14 @@ static ssize_t set_update_rate(struct device *dev,
adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);
mutex_lock(&data->update_lock);
- data->update_rate = update_rates[i];
+ data->update_interval = update_intervals[i];
mutex_unlock(&data->update_lock);
return count;
}
-static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate,
- set_update_rate);
+static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
+ set_update_interval);
static struct attribute *adm1031_attributes[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
@@ -830,7 +833,7 @@ static struct attribute *adm1031_attributes[] = {
&sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,
- &dev_attr_update_rate.attr,
+ &dev_attr_update_interval.attr,
&dev_attr_alarms.attr,
NULL
@@ -981,7 +984,8 @@ static void adm1031_init_client(struct i2c_client *client)
mask = ADM1031_UPDATE_RATE_MASK;
read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
- data->update_rate = update_rates[i];
+ /* Save it as update interval */
+ data->update_interval = update_intervals[i];
}
static struct adm1031_data *adm1031_update_device(struct device *dev)
@@ -993,7 +997,8 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
mutex_lock(&data->update_lock);
- next_update = data->last_updated + msecs_to_jiffies(data->update_rate);
+ next_update = data->last_updated
+ + msecs_to_jiffies(data->update_interval);
if (time_after(jiffies, next_update) || !data->valid) {
dev_dbg(&client->dev, "Starting adm1031 update\n");
--
1.7.0.87.g0901d
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists