| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Sep 2010 21:20:35 +0800
From: Chase Douglas <chase.douglas@...onical.com>
To: Michael Poole <mdpoole@...ilus.org>
Cc: linux-input@...r.kernel.org, Jiri Kosina <jkosina@...e.cz>,
Jiri Slaby <jirislaby@...il.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] HID: magicmouse: Use hid-input parsing rather than
bypassing it
On Thu, 2010-09-23 at 08:15 -0400, Michael Poole wrote:
> Let the HID core handle input device setup and HID-compliant reports.
> This driver then only has to worry about the non-standard reports.
>
> Signed-off-by: Michael Poole <mdpoole@...ilus.org>
Michael, do you need me to retest the patch? I haven't looked at this
second version, but if it's pretty much as you describe below and you
don't need me to test it again, then my ACK still stands.
Thanks,
-- Chase
> ---
> drivers/hid/hid-magicmouse.c | 81
> +++++++++--------------------------------
> 1 files changed, 18 insertions(+), 63 deletions(-)
>
> This is a rebased and slightly revised version of an RFC patch I sent
> out a few weeks ago (which Chase later acked):
> http://www.spinics.net/lists/linux-input/msg10948.html
>
> The changes in v2 are to clarify the commit summary line and comments,
> and remove one if() that would pass if the device had any HID input
> descriptors. If/when someone adds support for a device that has none of
> those, the if() could be restored.
>
> diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
> index 8791a08..5e1907a 100644
> --- a/drivers/hid/hid-magicmouse.c
> +++ b/drivers/hid/hid-magicmouse.c
> @@ -279,13 +279,6 @@ static int magicmouse_raw_event(struct hid_device
> *hdev,
> int x = 0, y = 0, ii, clicks = 0, npoints;
>
> switch (data[0]) {
> - case 0x10:
> - if (size != 6)
> - return 0;
> - x = (__s16)(data[2] | data[3] << 8);
> - y = (__s16)(data[4] | data[5] << 8);
> - clicks = data[1];
> - break;
> case TRACKPAD_REPORT_ID:
> /* Expect four bytes of prefix, and N*9 bytes of touch data. */
> if (size < 4 || ((size - 4) % 9) != 0)
> @@ -343,13 +336,6 @@ static int magicmouse_raw_event(struct hid_device
> *hdev,
> magicmouse_raw_event(hdev, report, data + 2 + data[1],
> size - 2 - data[1]);
> break;
> - case 0x20: /* Theoretically battery status (0-100), but I have
> - * never seen it -- maybe it is only upon request.
> - */
> - case 0x60: /* Unknown, maybe laser on/off. */
> - case 0x61: /* Laser reflection status change.
> - * data[1]: 0 = spotted, 1 = lost
> - */
> default:
> return 0;
> }
> @@ -377,36 +363,8 @@ static int magicmouse_raw_event(struct hid_device
> *hdev,
> return 1;
> }
>
> -static int magicmouse_input_open(struct input_dev *dev)
> -{
> - struct hid_device *hid = input_get_drvdata(dev);
> -
> - return hid->ll_driver->open(hid);
> -}
> -
> -static void magicmouse_input_close(struct input_dev *dev)
> -{
> - struct hid_device *hid = input_get_drvdata(dev);
> -
> - hid->ll_driver->close(hid);
> -}
> -
> static void magicmouse_setup_input(struct input_dev *input, struct
> hid_device *hdev)
> {
> - input_set_drvdata(input, hdev);
> - input->event = hdev->ll_driver->hidinput_input_event;
> - input->open = magicmouse_input_open;
> - input->close = magicmouse_input_close;
> -
> - input->name = hdev->name;
> - input->phys = hdev->phys;
> - input->uniq = hdev->uniq;
> - input->id.bustype = hdev->bus;
> - input->id.vendor = hdev->vendor;
> - input->id.product = hdev->product;
> - input->id.version = hdev->version;
> - input->dev.parent = hdev->dev.parent;
> -
> __set_bit(EV_KEY, input->evbit);
>
> if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) {
> @@ -466,11 +424,22 @@ static void magicmouse_setup_input(struct
> input_dev *input, struct hid_device *h
> }
> }
>
> +static int magicmouse_input_mapping(struct hid_device *hdev,
> + struct hid_input *hi, struct hid_field *field,
> + struct hid_usage *usage, unsigned long **bit, int *max)
> +{
> + struct magicmouse_sc *msc = hid_get_drvdata(hdev);
> +
> + if (!msc->input)
> + msc->input = hi->input;
> +
> + return 0;
> +}
> +
> static int magicmouse_probe(struct hid_device *hdev,
> const struct hid_device_id *id)
> {
> __u8 feature[] = { 0xd7, 0x01 };
> - struct input_dev *input;
> struct magicmouse_sc *msc;
> struct hid_report *report;
> int ret;
> @@ -500,8 +469,11 @@ static int magicmouse_probe(struct hid_device
> *hdev,
> goto err_free;
> }
>
> - /* we are handling the input ourselves */
> - hidinput_disconnect(hdev);
> + /* We do this after hid-input is done parsing reports so that
> + * hid-input uses the most natural button and axis IDs.
> + */
> + if (msc->input)
> + magicmouse_setup_input(msc->input, hdev);
>
> if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
> report = hid_register_report(hdev, HID_INPUT_REPORT,
> @@ -528,24 +500,7 @@ static int magicmouse_probe(struct hid_device
> *hdev,
> goto err_stop_hw;
> }
>
> - input = input_allocate_device();
> - if (!input) {
> - dev_err(&hdev->dev, "can't alloc input device\n");
> - ret = -ENOMEM;
> - goto err_stop_hw;
> - }
> - magicmouse_setup_input(input, hdev);
> -
> - ret = input_register_device(input);
> - if (ret) {
> - dev_err(&hdev->dev, "input device registration failed\n");
> - goto err_input;
> - }
> - msc->input = input;
> -
> return 0;
> -err_input:
> - input_free_device(input);
> err_stop_hw:
> hid_hw_stop(hdev);
> err_free:
> @@ -558,7 +513,6 @@ static void magicmouse_remove(struct hid_device
> *hdev)
> struct magicmouse_sc *msc = hid_get_drvdata(hdev);
>
> hid_hw_stop(hdev);
> - input_unregister_device(msc->input);
> kfree(msc);
> }
>
> @@ -577,6 +531,7 @@ static struct hid_driver magicmouse_driver = {
> .probe = magicmouse_probe,
> .remove = magicmouse_remove,
> .raw_event = magicmouse_raw_event,
> + .input_mapping = magicmouse_input_mapping,
> };
>
> static int __init magicmouse_init(void)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists