| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Oct 2010 16:44:12 -0700
From: John Stultz <johnstul@...ibm.com>
To: LKML <linux-kernel@...r.kernel.org>
Cc: John Stultz <johnstul@...ibm.com>,
Ralf Baechle <ralf@...ux-mips.org>,
Thomas Gleixner <tglx@...utronix.de>
Subject: [PATCH 6/7] mips: convert to clocksource_register_hz/khz
This converts the mips clocksources to use clocksource_register_hz/khz
This is untested, so any assistance in testing would be appreciated!
Signed-off-by: John Stultz <johnstul@...ibm.com>
CC: Ralf Baechle <ralf@...ux-mips.org>
CC: Thomas Gleixner <tglx@...utronix.de>
---
arch/mips/alchemy/common/time.c | 3 +-
arch/mips/cavium-octeon/csrc-octeon.c | 3 +-
arch/mips/include/asm/time.h | 6 ----
arch/mips/jz4740/time.c | 3 +-
arch/mips/kernel/cevt-txx9.c | 3 +-
arch/mips/kernel/csrc-bcm1480.c | 3 +-
arch/mips/kernel/csrc-ioasic.c | 4 +--
arch/mips/kernel/csrc-powertv.c | 35 ++---------------------
arch/mips/kernel/csrc-r4k.c | 4 +--
arch/mips/kernel/csrc-sb1250.c | 3 +-
arch/mips/kernel/i8253.c | 5 +--
arch/mips/loongson/common/cs5536/cs5536_mfgpt.c | 5 +--
arch/mips/sgi-ip27/ip27-timer.c | 3 +-
13 files changed, 14 insertions(+), 66 deletions(-)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 2aecb2f..d5da6ad 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int)
goto cntr_err;
/* register counter1 clocksource and event device */
- clocksource_set_clock(&au1x_counter1_clocksource, 32768);
- clocksource_register(&au1x_counter1_clocksource);
+ clocksource_register_hz(&au1x_counter1_clocksource, 32768);
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index b6847c8..28f0697 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -77,8 +77,7 @@ unsigned long long notrace sched_clock(void)
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
}
static u64 octeon_udelay_factor;
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index c7f1bfe..bc14447 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -84,12 +84,6 @@ static inline int init_mips_clocksource(void)
#endif
}
-static inline void clocksource_set_clock(struct clocksource *cs,
- unsigned int clock)
-{
- clocksource_calc_mult_shift(cs, clock, 4);
-}
-
static inline void clockevent_set_clock(struct clock_event_device *cd,
unsigned int clock)
{
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index fe01678..03dfd4e 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -121,8 +121,7 @@ void __init plat_time_init(void)
clockevents_register_device(&jz4740_clockevent);
- clocksource_set_clock(&jz4740_clocksource, clk_rate);
- ret = clocksource_register(&jz4740_clocksource);
+ ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
if (ret)
printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 218ee6b..ae8093d 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -50,8 +50,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr,
{
struct txx9_tmr_reg __iomem *tmrptr;
- clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
- clocksource_register(&txx9_clocksource.cs);
+ clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
__raw_writel(TCR_BASE, &tmrptr->tcr);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 51489f8..f96f99c 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void)
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
+ clocksource_register_hz(cs, zbbus);
}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 23da108..46bd7fa 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void)
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
clocksource_dec.rating = 200 + freq / 10000000;
- clocksource_set_clock(&clocksource_dec, freq);
-
- clocksource_register(&clocksource_dec);
+ clocksource_register_hz(&clocksource_dec, freq);
}
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index a27c16c..2e7c523 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void)
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
}
/**
@@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = {
/**
* powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
*
- * The hard part here is coming up with a constant k and shift s such that
- * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
- * when shifted right by s, yields the corresponding number of nanoseconds.
* We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
- * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
- * done in 64 bits, avoiding an overflow means that k must be less than
- * 64 - 48 = 16 bits.
+ * 1 / (27,000,000/8) seconds.
*/
static void __init powertv_tim_c_clocksource_init(void)
{
- int prescale;
- unsigned long dividend;
- unsigned long k;
- int s;
- const int max_k_bits = (64 - 48) - 1;
- const unsigned long billion = 1000000000;
const unsigned long counts_per_second = 27000000 / 8;
- prescale = BITS_PER_LONG - ilog2(billion) - 1;
- dividend = billion << prescale;
- k = dividend / counts_per_second;
- s = ilog2(k) - max_k_bits;
-
- if (s < 0)
- s = prescale;
-
- else {
- k >>= s;
- s += prescale;
- }
-
- clocksource_tim_c.mult = k;
- clocksource_tim_c.shift = s;
clocksource_tim_c.rating = 200;
- clocksource_register(&clocksource_tim_c);
+ clocksource_register_hz(&clocksource_tim_c, counts_per_second);
tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e95a3cd..decd1fa 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void)
/* Calculate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
return 0;
}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index d14d3d1..e9606d9 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void)
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
+ clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 9479406..1a08239 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -195,8 +195,6 @@ static struct clocksource clocksource_pit = {
.rating = 110,
.read = pit_read,
.mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
};
static int __init init_pit_clocksource(void)
@@ -204,7 +202,6 @@ static int __init init_pit_clocksource(void)
if (num_possible_cpus() > 1) /* PIT does not scale! */
return 0;
- clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
- return clocksource_register(&clocksource_pit);
+ return clocksource_register_hz(&clocksource_pit, CLOCK_TICK_RATE);
}
arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 8c807c9..0cb1b97 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -201,8 +201,6 @@ static struct clocksource clocksource_mfgpt = {
.rating = 120, /* Functional for real use, but not desired */
.read = mfgpt_read,
.mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 22,
};
int __init init_mfgpt_clocksource(void)
@@ -210,8 +208,7 @@ int __init init_mfgpt_clocksource(void)
if (num_possible_cpus() > 1) /* MFGPT does not scale! */
return 0;
- clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
- return clocksource_register(&clocksource_mfgpt);
+ return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
}
arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index d6802d6..3cac883 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -177,8 +177,7 @@ static void __init hub_rt_clocksource_init(void)
{
struct clocksource *cs = &hub_rt_clocksource;
- clocksource_set_clock(cs, CYCLES_PER_SEC);
- clocksource_register(cs);
+ clocksource_register_hz(cs, CYCLES_PER_SEC);
}
void __init plat_time_init(void)
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists