Initializing cgroup subsys cpuset Linux version 2.6.36 (root@f6bvp-11) (gcc version 4.4.3 (GCC) ) #1 SMP Thu Oct 28 17:33:07 CEST 2010 Command line: BOOT_IMAGE=2.6.36 root=UUID=7d268bb1-5045-4ccc-92b7-28a228f7a484 nosmp resume=UUID=4ee3102a-966b-4bb8-8bd5-53d37cf5a2e8 splash=silent vga=788 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7fee0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CDFFF write-protect CE000-EFFFF uncachable F0000-F7FFF write-through F8000-F8FFF uncachable F9000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0D0000000 mask FF8000000 write-combining 2 base 07FF00000 mask FFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f39c0] f39c0 init_memory_mapping: 0000000000000000-000000007fee0000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fee0000 page 4k kernel direct mapping tables up to 7fee0000 @ 16000-1a000 RAMDISK: 37ab6000 - 37ff0000 ACPI: RSDP 00000000000f7910 00014 (v00 P4M890) ACPI: RSDT 000000007fee3040 00038 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 000000007fee30c0 00074 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 000000007fee3180 06A65 (v01 P4M890 AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 000000007fee0000 00040 ACPI: MCFG 000000007fee9d40 0003C (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 000000007fee9c40 00090 (v01 P4M890 AWRDACPI 42302E31 AWRD 00000000) ACPI: SSDT 000000007fee9dc0 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20041203) ACPI: SSDT 000000007feea250 002F1 (v01 PmRef CpuPm 00003000 INTL 20041203) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007fee0 On node 0 totalpages: 523887 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 DMA32 zone: 7109 pages used for memmap DMA32 zone: 512795 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 I/O APIC #4 Version 17 at 0xFEC00000. IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23 I/O APIC #5 Version 17 at 0xFECC0000. IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47 Processors: 2 2 Processors exceeds max_cpus limit of 0 SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 64 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 7fef0000 (gap: 7fef0000:60110000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880001800000 s85440 r8192 d21056 u2097152 early_res array is doubled to 64 at [18000 - 187ff] pcpu-alloc: s85440 r8192 d21056 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516722 Kernel command line: BOOT_IMAGE=2.6.36 root=UUID=7d268bb1-5045-4ccc-92b7-28a228f7a484 nosmp resume=UUID=4ee3102a-966b-4bb8-8bd5-53d37cf5a2e8 splash=silent vga=788 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Subtract (36 early reservations) #1 [0001000000 - 00016b3a48] TEXT DATA BSS #2 [0037ab6000 - 0037ff0000] RAMDISK #3 [00016b4000 - 00016b40ae] BRK #4 [00000f39d0 - 0000100000] BIOS reserved #5 [00000f39c0 - 00000f39d0] MP-table mpf #6 [000009f000 - 00000f2154] BIOS reserved #7 [00000f22b0 - 00000f39c0] BIOS reserved #8 [00000f2154 - 00000f22b0] MP-table mpc #9 [0000010000 - 0000012000] TRAMPOLINE #10 [0000012000 - 0000016000] ACPI WAKEUP #11 [0000016000 - 0000018000] PGTABLE #12 [00016b40c0 - 00016b50c0] BOOTMEM #13 [00016b3a80 - 00016b3c00] BOOTMEM #14 [0001eb6000 - 0001eb7000] BOOTMEM #15 [0001eb7000 - 0001eb8000] BOOTMEM #16 [0002000000 - 0003c00000] MEMMAP 0 #17 [00016b3c00 - 00016b3d80] BOOTMEM #18 [00016b50c0 - 00016c10c0] BOOTMEM #19 [00016c2000 - 00016c3000] BOOTMEM #20 [00016b3d80 - 00016b3e06] BOOTMEM #21 [00016c10c0 - 00016c12b8] BOOTMEM #22 [00016b3e40 - 00016b3e60] BOOTMEM #23 [00016b3e80 - 00016b3f0e] BOOTMEM #24 [00016b3f40 - 00016b3fce] BOOTMEM #25 [0001800000 - 000181c000] BOOTMEM #26 [00016c12c0 - 00016c12c8] BOOTMEM #27 [00016c1300 - 00016c1308] BOOTMEM #28 [00016c1340 - 00016c1344] BOOTMEM #29 [00016c1380 - 00016c1388] BOOTMEM #30 [00016c13c0 - 00016c1510] BOOTMEM #31 [00016c1540 - 00016c15c0] BOOTMEM #32 [00016c15c0 - 00016c1640] BOOTMEM #33 [00016c3000 - 00016cb000] BOOTMEM #34 [000181c000 - 0001a1c000] BOOTMEM #35 [00016cb000 - 00017cb000] BOOTMEM Memory: 2051344k/2096000k available (3743k kernel code, 452k absent, 44204k reserved, 1934k data, 500k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:512 Console: colour dummy device 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2194.356 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.71 BogoMIPS (lpj=8777424) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: Unsupported number of siblings 2 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20100702 ACPI: setting ELCR to 0200 (from 0e20) Setting APIC routing to flat SMP mode deactivated. SMP disabled Brought up 1 CPUs Total of 1 processors activated (4388.71 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: SSDT 000000007feea1c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) ------------[ cut here ]------------ WARNING: at mm/page_alloc.c:1984 __alloc_pages_nodemask+0x5d2/0x6a0() Hardware name: MS-7258 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.36 #1 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_null+0x15/0x20 [] __alloc_pages_nodemask+0x5d2/0x6a0 [] ? __ioremap_caller+0x25b/0x380 [] ? ioremap_nocache+0x12/0x20 [] ? acpi_os_map_memory+0x12/0x1e [] ? acpi_ex_system_memory_space_handler+0x0/0x1e0 [] __get_free_pages+0x12/0x50 [] __kmalloc+0xef/0x100 [] acpi_os_allocate+0x25/0x27 [] acpi_ex_load_op+0xd8/0x290 [] acpi_ex_opcode_1A_1T_0R+0x25/0x4b [] acpi_ds_exec_end_op+0xea/0x3d6 [] acpi_ps_parse_loop+0x7d9/0x95f [] ? kmem_cache_alloc+0x81/0xb0 [] ? kmem_cache_alloc+0x81/0xb0 [] acpi_ps_parse_aml+0x9a/0x2b9 [] acpi_ps_execute_method+0x1cd/0x29e [] acpi_ns_evaluate+0xe1/0x1a8 [] acpi_evaluate_object+0xf9/0x1f2 [] acpi_processor_set_pdc+0x15e/0x185 [] early_init_pdc+0xbc/0xc0 [] acpi_ns_walk_namespace+0xb9/0x177 [] ? early_init_pdc+0x0/0xc0 [] ? early_init_pdc+0x0/0xc0 [] acpi_walk_namespace+0x85/0xbf [] ? acpi_init+0x0/0x121 [] acpi_early_processor_set_pdc+0x3a/0x53 [] acpi_bus_init+0xb5/0x1de [] ? kobject_create_and_add+0x3e/0x80 [] acpi_init+0x71/0x121 [] do_one_initcall+0x3e/0x180 [] kernel_init+0x159/0x1e3 [] kernel_thread_helper+0x4/0x10 [] ? kernel_init+0x0/0x1e3 [] ? kernel_thread_helper+0x0/0x10 ---[ end trace 4eaa2a86a8e2da22 ]--- ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff88007f8430f0), AE_NO_MEMORY ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._PDC] (Node ffff88007f843190), AE_NO_MEMORY ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored) pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:0b.0: reg 10: [io 0xfc00-0xfcff] pci 0000:00:0b.0: reg 14: [mem 0xdffff000-0xdffff0ff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0f.0: reg 10: [io 0xf800-0xf807] pci 0000:00:0f.0: reg 14: [io 0xf400-0xf403] pci 0000:00:0f.0: reg 18: [io 0xf000-0xf007] pci 0000:00:0f.0: reg 1c: [io 0xec00-0xec03] pci 0000:00:0f.0: reg 20: [io 0xe800-0xe80f] pci 0000:00:0f.0: reg 24: [io 0xe400-0xe4ff] pci 0000:00:0f.1: reg 20: [io 0xe000-0xe00f] pci 0000:00:10.0: reg 20: [io 0xdc00-0xdc1f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20: [io 0xd800-0xd81f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20: [io 0xd400-0xd41f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20: [io 0xd000-0xd01f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10: [mem 0xdfffe000-0xdfffe0ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.5: reg 10: [io 0xcc00-0xccff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff] pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfbfffff pref] pci 0000:02:00.0: reg 10: [mem 0xdc000000-0xdcffffff] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:02:00.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit] pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:02.0: PCI bridge to [bus 02-02] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:03.0: PCI bridge to [bus 03-03] pci 0000:00:03.0: bridge window [io 0xa000-0xafff] pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff] pci 0000:00:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0 ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [ALKA] (IRQs *20) ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22) ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009f000 - 000000000009ffff reserve RAM buffer: 000000007fee0000 - 000000007fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x0400-0x047f] has been reserved system 00:01: [io 0x0500-0x050f] has been reserved system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x0290-0x0297] has been reserved system 00:02: [io 0x0880-0x088f] has been reserved system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: [mem 0x000cec00-0x000cffff] has been reserved system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved system 00:0e: [mem 0x7fee0000-0x7fefffff] could not be reserved system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x00100000-0x7fedffff] could not be reserved system 00:0e: [mem 0xfec00000-0xfec00fff] has been reserved system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] pci 0000:00:01.0: bridge window [mem 0xdfc00000-0xdfcfffff] pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfbfffff pref] pci 0000:02:00.0: BAR 6: assigned [mem 0xde000000-0xde01ffff pref] pci 0000:00:02.0: PCI bridge to [bus 02-02] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] pci 0000:00:02.0: bridge window [mem 0xdc000000-0xdeffffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:03.0: PCI bridge to [bus 03-03] pci 0000:00:03.0: bridge window [io 0xa000-0xafff] pci 0000:00:03.0: bridge window [mem 0xdfe00000-0xdfefffff] pci 0000:00:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref] pci 0000:00:01.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:02.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:03.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] pci_bus 0000:01: resource 1 [mem 0xdfc00000-0xdfcfffff] pci_bus 0000:01: resource 2 [mem 0xdfb00000-0xdfbfffff pref] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdeffffff] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] pci_bus 0000:03: resource 1 [mem 0xdfe00000-0xdfefffff] pci_bus 0000:03: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001 pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message pci 0000:02:00.0: Boot video device PCI: CLS 32 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5352k freed audit: initializing netlink socket (disabled) type=2000 audit(1288282720.828:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 4017 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 1875k, total 262144k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded Uniform Multi-Platform E-IDE driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered input: AT Translated Set 2 keyboard as /class/input/input0 input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1 registered taskstats version 1 Freeing unused kernel memory: 500k freed nash-hotplug (523): /proc/523/oom_adj is deprecated, please use /proc/523/oom_score_adj instead. SCSI subsystem initialized libata version 3.00 loaded. pata_via 0000:00:0f.1: version 0.3.4 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pata_via 0000:00:0f.1: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pata_via 0000:00:0f.1: VIA VLink IRQ fixup, from 255 to 10 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS05, max UDMA/33 ata1.01: ATA-6: IC35L120AVV207-1, V24OA66A, max UDMA/100 ata1.01: 241254720 sectors, multi 16: LBA48 ata1.00: configured for UDMA/33 ata1.01: configured for UDMA/100 scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS05 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA IC35L120AVV207-1 V24O PQ: 0 ANSI: 5 sd 0:0:1:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:1:0: [sda] Attached SCSI disk ata2.00: ATA-6: ST3120026A, 3.06, max UDMA/100 ata2.00: 234441648 sectors, multi 16: LBA48 ata2.00: limited to UDMA/33 due to 40-wire cable ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 > sd 1:0:0:0: [sdb] Attached SCSI disk ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 pata_acpi 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pata_acpi 0000:00:0f.0: PCI INT B disabled sata_via 0000:00:0f.0: version 2.6 sata_via 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 sata_via 0000:00:0f.0: routed to hard irq line 11 irq 11: nobody cared (try booting with the "irqpoll" option) Pid: 542, comm: modprobe Tainted: G W 2.6.36 #1 Call Trace: [] __report_bad_irq+0x26/0xa0 [] note_interrupt+0x18c/0x1d0 [] handle_level_irq+0xdd/0x100 [] ? read_tsc+0x9/0x20 [] handle_irq+0x1d/0x30 [] do_IRQ+0x67/0xf0 [] ret_from_intr+0x0/0x11 [] ? __do_softirq+0x63/0x140 [] ? call_softirq+0x1c/0x30 [] ? do_softirq+0x65/0xa0 [] ? irq_exit+0x7d/0x90 [] ? do_IRQ+0x70/0xf0 [] ? ret_from_intr+0x0/0x11 [] ? _raw_spin_unlock_irqrestore+0xb/0x20 [] ? __setup_irq+0x1b3/0x340 [] ? ata_bmdma_interrupt+0x0/0x200 [libata] [] ? request_threaded_irq+0xf9/0x160 [] ? devm_request_threaded_irq+0x6c/0xc0 [] ? ata_bmdma_interrupt+0x0/0x200 [libata] [] ? ata_bmdma_interrupt+0x0/0x200 [libata] [] ? ata_host_activate+0x94/0x110 [libata] [] ? pcibios_set_master+0x21/0xa0 [] ? svia_init_one+0x581/0x640 [sata_via] [] ? local_pci_probe+0x12/0x20 [] ? pci_device_probe+0x80/0xb0 [] ? driver_sysfs_add+0x7a/0xb0 [] ? driver_probe_device+0x8d/0x1a0 [] ? __driver_attach+0x93/0xa0 [] ? __driver_attach+0x0/0xa0 [] ? bus_for_each_dev+0x68/0x90 [] ? driver_attach+0x19/0x20 [] ? bus_add_driver+0xb8/0x260 [] ? svia_init+0x0/0x20 [sata_via] [] ? driver_register+0x78/0x140 [] ? svia_init+0x0/0x20 [sata_via] [] ? __pci_register_driver+0x51/0xd0 [] ? svia_init+0x1e/0x20 [sata_via] [] ? do_one_initcall+0x3e/0x180 [] ? sys_init_module+0xbb/0x200 [] ? system_call_fastpath+0x16/0x1b handlers: [] (ata_bmdma_interrupt+0x0/0x200 [libata]) Disabling IRQ #11 scsi2 : sata_via scsi3 : sata_via ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf400 bmdma 0xe800 irq 11 ata4: SATA max UDMA/133 cmd 0xf000 ctl 0xec00 bmdma 0xe808 irq 11 ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: acl udev: starting version 153 agpgart: Detected VIA P4M890 chipset agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram input: Power Button as /class/input/input2 ACPI: Power Button [PWRB] input: Sleep Button as /class/input/input3 ACPI: Sleep Button [SLPB] input: Power Button as /class/input/input4 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle pci_hotplug: PCI Hot Plug PCI Core version: 0.5 FDC 0 is a post-1991 82077 8139too: 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKF] BIOS reported IRQ 0, using IRQ 10 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 8139too 0000:00:0b.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10 8139too 0000:00:0b.0: eth0: RealTek RTL8139 at 0xffffc900100fe000, 00:16:17:b3:e9:6c, IRQ 10 sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 0:0:1:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: Attached scsi generic sg2 type 0 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 irq 11: nobody cared (try booting with the "irqpoll" option) Pid: 786, comm: modprobe Tainted: G W 2.6.36 #1 Call Trace: [] __report_bad_irq+0x26/0xa0 [] note_interrupt+0x18c/0x1d0 [] handle_level_irq+0xdd/0x100 [] ? read_tsc+0x9/0x20 [] handle_irq+0x1d/0x30 [] do_IRQ+0x67/0xf0 [] ret_from_intr+0x0/0x11 [] ? __do_softirq+0x63/0x140 [] ? call_softirq+0x1c/0x30 [] ? do_softirq+0x65/0xa0 [] ? irq_exit+0x7d/0x90 [] ? do_IRQ+0x70/0xf0 [] ? ret_from_intr+0x0/0x11 [] ? _raw_spin_unlock_irqrestore+0xb/0x20 [] ? __setup_irq+0x1b3/0x340 [] ? __pci_request_region+0xa8/0x170 [] ? snd_via8233_interrupt+0x0/0x140 [snd_via82xx] [] ? request_threaded_irq+0xf9/0x160 [] ? snd_via82xx_probe+0x306/0xe23 [snd_via82xx] [] ? sysfs_addrm_finish+0x2e/0xd0 [] ? sysfs_add_one+0x27/0xd0 [] ? local_pci_probe+0x12/0x20 [] ? pci_device_probe+0x80/0xb0 [] ? driver_sysfs_add+0x7a/0xb0 [] ? driver_probe_device+0x8d/0x1a0 [] ? __driver_attach+0x93/0xa0 [] ? __driver_attach+0x0/0xa0 [] ? bus_for_each_dev+0x68/0x90 [] ? driver_attach+0x19/0x20 [] ? bus_add_driver+0xb8/0x260 [] ? alsa_card_via82xx_init+0x0/0x20 [snd_via82xx] [] ? driver_register+0x78/0x140 [] ? alsa_card_via82xx_init+0x0/0x20 [snd_via82xx] [] ? __pci_register_driver+0x51/0xd0 [] ? alsa_card_via82xx_init+0x1e/0x20 [snd_via82xx] [] ? do_one_initcall+0x3e/0x180 [] ? sys_init_module+0xbb/0x200 [] ? system_call_fastpath+0x16/0x1b handlers: [] (ata_bmdma_interrupt+0x0/0x200 [libata]) [] (snd_via8233_interrupt+0x0/0x140 [snd_via82xx]) Disabling IRQ #11 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 EXT4-fs (sdb5): re-mounted. Opts: acl EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with writeback data mode loop: module loaded Adding 4602584k swap on /dev/sda1. Priority:-1 extents:1 across:4602584k Adding 4088504k swap on /dev/sdb1. Priority:-2 extents:1 across:4088504k IPv6: Loaded, but administratively disabled, reboot required to enable eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 spurious 8259A interrupt: IRQ7.