| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 Dec 2010 15:23:11 +0900
From: MyungJoo Ham <myungjoo.ham@...sung.com>
To: linux-kernel@...r.kernel.org
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Liam Girdwood <lrg@...mlogic.co.uk>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Kyungmin Park <kyungmin.park@...sung.com>,
Joonyoung Shim <jy0922.shim@...sung.com>,
Lukasz Majewski <l.majewski@...sung.com>,
myungjoo.ham@...il.com
Subject: [PATCH v2 6/6] MFD MAX8998/LP3974: Support DVS-GPIO.
The previous driver did not support BUCK1-DVS3, BUCK1-DVS4, and
BUCK2-DVS2 modes. This patch adds such modes and an option to block
setting buck1/2 voltages out of the preset values.
Signed-off-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
drivers/regulator/max8998.c | 87 +++++++++++++++++++++++++++++++++----------
include/linux/mfd/max8998.h | 26 ++++++++++---
2 files changed, 87 insertions(+), 26 deletions(-)
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 1c0bbd0..464cd14 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -456,6 +456,9 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
}
}
+ if (pdata->buck_voltage_lock)
+ return -EINVAL;
+
/* no predefine regulator found */
max8998->buck1_idx = (buck1_last_val % 2) + 2;
dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n",
@@ -483,18 +486,26 @@ buck1_exit:
"BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n"
, i, max8998->buck2_vol[0], max8998->buck2_vol[1]);
if (gpio_is_valid(pdata->buck2_set3)) {
- if (max8998->buck2_vol[0] == i) {
- max8998->buck2_idx = 0;
- buck2_gpio_set(pdata->buck2_set3, 0);
- } else {
- max8998->buck2_idx = 1;
- ret = max8998_get_voltage_register(rdev, ®,
- &shift,
- &mask);
- ret = max8998_write_reg(i2c, reg, i);
- max8998->buck2_vol[1] = i;
- buck2_gpio_set(pdata->buck2_set3, 1);
+
+ /* check if requested voltage */
+ /* value is already defined */
+ for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
+ if (max8998->buck2_vol[j] == i) {
+ max8998->buck2_idx = j;
+ buck2_gpio_set(pdata->buck2_set3, j);
+ goto buck2_exit;
+ }
}
+
+ if (pdata->buck_voltage_lock)
+ return -EINVAL;
+
+ max8998_get_voltage_register(rdev,
+ ®, &shift, &mask);
+ ret = max8998_write_reg(i2c, reg, i);
+ max8998->buck2_vol[max8998->buck2_idx] = i;
+ buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
+buck2_exit:
dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
gpio_get_value(pdata->buck2_set3));
} else {
@@ -878,6 +889,9 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, max8998);
i2c = max8998->iodev->i2c;
+ max8998->buck1_idx = pdata->buck1_default_idx;
+ max8998->buck2_idx = pdata->buck2_default_idx;
+
/* NOTE: */
/* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */
/* will be displayed */
@@ -910,23 +924,46 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- != (pdata->buck1_max_voltage1 / 1000))
+ < (pdata->buck1_voltage1 / 1000))
i++;
- printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx);
max8998->buck1_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
+ if (ret)
+ return ret;
/* Set predefined value for BUCK1 register 2 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- != (pdata->buck1_max_voltage2 / 1000))
+ < (pdata->buck1_voltage2 / 1000))
i++;
max8998->buck1_vol[1] = i;
- printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx);
- ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i)
- + ret;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
+ if (ret)
+ return ret;
+
+ /* Set predefined value for BUCK1 register 3 */
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < (pdata->buck1_voltage3 / 1000))
+ i++;
+
+ max8998->buck1_vol[2] = i;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
+ if (ret)
+ return ret;
+
+ /* Set predefined value for BUCK1 register 4 */
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < (pdata->buck1_voltage4 / 1000))
+ i++;
+
+ max8998->buck1_vol[3] = i;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
if (ret)
return ret;
@@ -943,18 +980,28 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
gpio_direction_output(pdata->buck2_set3,
max8998->buck2_idx & 0x1);
- /* BUCK2 - set preset default voltage value to buck2_vol[0] */
+ /* BUCK2 register 1 */
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- != (pdata->buck2_max_voltage / 1000))
+ < (pdata->buck2_voltage1 / 1000))
i++;
- printk(KERN_ERR "i:%d, buck2_idx:%d\n", i, max8998->buck2_idx);
max8998->buck2_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
if (ret)
return ret;
+ /* BUCK2 register 2 */
+ i = 0;
+ while (buck12_voltage_map_desc.min +
+ buck12_voltage_map_desc.step*i
+ < (pdata->buck2_voltage2 / 1000))
+ i++;
+ printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx);
+ max8998->buck2_vol[1] = i;
+ ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
+ if (ret)
+ return ret;
}
switch (pdev->id_entry->driver_data) {
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 9c56839..2b117fe 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -78,12 +78,20 @@ struct max8998_regulator_data {
* @num_regulators: number of regultors used
* @irq_base: base IRQ number for max8998, required for IRQs
* @ono: power onoff IRQ number for max8998
- * @buck1_max_voltage1: BUCK1 maximum alowed voltage register 1
- * @buck1_max_voltage2: BUCK1 maximum alowed voltage register 2
- * @buck2_max_voltage: BUCK2 maximum alowed voltage
+ * @buck_voltage_lock: Do NOT change the values of the following six
+ * registers set by buck?_voltage?. The voltage of BUCK1/2 cannot
+ * be other than the preset values.
+ * @buck1_voltage1: BUCK1 DVS mode 1 voltage register
+ * @buck1_voltage2: BUCK1 DVS mode 2 voltage register
+ * @buck1_voltage3: BUCK1 DVS mode 3 voltage register
+ * @buck1_voltage4: BUCK1 DVS mode 4 voltage register
+ * @buck2_voltage1: BUCK2 DVS mode 1 voltage register
+ * @buck2_voltage2: BUCK2 DVS mode 2 voltage register
* @buck1_set1: BUCK1 gpio pin 1 to set output voltage
* @buck1_set2: BUCK1 gpio pin 2 to set output voltage
+ * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
* @buck2_set3: BUCK2 gpio pin to set output voltage
+ * @buck2_default_idx: Default for BUCK2 gpio pin.
* @eoc: End of Charge Level: 10 ~ 45% or if it's over 45, in mA.
* If it's under 10, leave it unchanged.
* @restart: Restart Level in mV: 100, 150, 200, and -1 for disable.
@@ -96,12 +104,18 @@ struct max8998_platform_data {
int num_regulators;
int irq_base;
int ono;
- int buck1_max_voltage1;
- int buck1_max_voltage2;
- int buck2_max_voltage;
+ bool buck_voltage_lock;
+ int buck1_voltage1;
+ int buck1_voltage2;
+ int buck1_voltage3;
+ int buck1_voltage4;
+ int buck2_voltage1;
+ int buck2_voltage2;
int buck1_set1;
int buck1_set2;
+ int buck1_default_idx;
int buck2_set3;
+ int buck2_default_idx;
bool wakeup;
int eoc;
int restart;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists