| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 6 Jan 2011 11:07:48 +0100
From: Ingo Molnar <mingo@...e.hu>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: [GIT PULL] x86/platform changes for v2.6.38
Linus,
Please pull the latest x86-platform-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-platform-for-linus
out-of-topic modifications in x86-platform-for-linus:
-----------------------------------------------------
drivers/platform/x86/intel_scu_ipc.c# 1da4b1c: x86/mrst: Add SFI platform device
drivers/rtc/Kconfig # 0146f26: rtc: Add drivers/rtc/rtc-mrst.c
drivers/rtc/Makefile # 0146f26: rtc: Add drivers/rtc/rtc-mrst.c
drivers/rtc/rtc-mrst.c # d3e1884: x86, mrst: Add explanation for us
# 0146f26: rtc: Add drivers/rtc/rtc-mrst.c
include/linux/sfi.h # 1da4b1c: x86/mrst: Add SFI platform device
Thanks,
Ingo
------------------>
Alan Cox (1):
x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
Alek Du (1):
x86: mrst: Add Moorestown specific reboot/shutdown support
Dirk Brandewie (3):
ce4100: Add PCI register emulation for CE4100
x86: Ce4100: Add reboot_fixup() for CE4100
ce4100: Add errata fixes for UART on CE4100
Feng Tang (7):
x86/mrst: Add SFI platform device parsing code
x86: mrst: Add vrtc driver which serves as a wall clock device
rtc: Add drivers/rtc/rtc-mrst.c
x86: mrst: Set vRTC's IRQ to level trigger type
x86, mrst: Add explanation for using 1960 as the year offset for vrtc
x86, apbt: Setup affinity for apb timers acting as per-cpu timer
x86, earlyprintk: Move mrst early console to platform/ and fix a typo
Jacob Pan (1):
x86: mrst: Parse SFI timer table for all timer configs
Randy Dunlap (1):
x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
Shérab (1):
x86/platform: Add Eurobraille/Iris power off support
Thomas Gleixner (2):
x86: Add CE4100 platform support
x86: platform: Move iris to x86/platform where it belongs
Vasiliy Kulikov (1):
x86, mrst: Check platform_device_register() return code
Vinod Koul (1):
x86: mrst: Add audio driver bindings
Documentation/x86/boot.txt | 1 +
arch/x86/Kconfig | 29 +
arch/x86/include/asm/bootparam.h | 1 +
arch/x86/include/asm/fixmap.h | 4 +
arch/x86/include/asm/mrst-vrtc.h | 9 +
arch/x86/include/asm/mrst.h | 14 +-
arch/x86/include/asm/setup.h | 6 +
arch/x86/kernel/Makefile | 1 -
arch/x86/kernel/apb_timer.c | 1 +
arch/x86/kernel/early_printk.c | 3 +-
arch/x86/kernel/head32.c | 3 +
arch/x86/kernel/reboot_fixups_32.c | 16 +
arch/x86/pci/Makefile | 1 +
arch/x86/pci/ce4100.c | 315 +++++++++++
arch/x86/platform/Makefile | 2 +
arch/x86/platform/ce4100/Makefile | 1 +
arch/x86/platform/ce4100/ce4100.c | 132 +++++
arch/x86/platform/iris/Makefile | 1 +
arch/x86/platform/iris/iris.c | 91 +++
arch/x86/platform/mrst/Makefile | 2 +
.../{kernel => platform/mrst}/early_printk_mrst.c | 0
arch/x86/platform/mrst/mrst.c | 546 ++++++++++++++++++-
arch/x86/platform/mrst/vrtc.c | 165 ++++++
drivers/platform/x86/intel_scu_ipc.c | 5 +
drivers/rtc/Kconfig | 12 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-mrst.c | 582 ++++++++++++++++++++
include/linux/sfi.h | 8 +-
28 files changed, 1934 insertions(+), 18 deletions(-)
create mode 100644 arch/x86/include/asm/mrst-vrtc.h
create mode 100644 arch/x86/pci/ce4100.c
create mode 100644 arch/x86/platform/ce4100/Makefile
create mode 100644 arch/x86/platform/ce4100/ce4100.c
create mode 100644 arch/x86/platform/iris/Makefile
create mode 100644 arch/x86/platform/iris/iris.c
rename arch/x86/{kernel => platform/mrst}/early_printk_mrst.c (100%)
create mode 100644 arch/x86/platform/mrst/vrtc.c
create mode 100644 drivers/rtc/rtc-mrst.c
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 30b43e1..bdeb81c 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -600,6 +600,7 @@ Protocol: 2.07+
0x00000001 lguest
0x00000002 Xen
0x00000003 Moorestown MID
+ 0x00000004 CE4100 TV Platform
Field name: hardware_subarch_data
Type: write (subarch-dependent)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e832768..6ab6310 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -377,6 +377,18 @@ config X86_ELAN
If unsure, choose "PC-compatible" instead.
+config X86_INTEL_CE
+ bool "CE4100 TV platform"
+ depends on PCI
+ depends on PCI_GODIRECT
+ depends on X86_32
+ depends on X86_EXTENDED_PLATFORM
+ select X86_REBOOTFIXUPS
+ ---help---
+ Select for the Intel CE media processor (CE4100) SOC.
+ This option compiles in support for the CE4100 SOC for settop
+ boxes and media devices.
+
config X86_MRST
bool "Moorestown MID platform"
depends on PCI
@@ -385,6 +397,10 @@ config X86_MRST
depends on X86_EXTENDED_PLATFORM
depends on X86_IO_APIC
select APB_TIMER
+ select I2C
+ select SPI
+ select INTEL_SCU_IPC
+ select X86_PLATFORM_DEVICES
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
@@ -466,6 +482,19 @@ config X86_ES7000
Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
supposed to run on an IA32-based Unisys ES7000 system.
+config X86_32_IRIS
+ tristate "Eurobraille/Iris poweroff module"
+ depends on X86_32
+ ---help---
+ The Iris machines from EuroBraille do not have APM or ACPI support
+ to shut themselves down properly. A special I/O sequence is
+ needed to do so, which is what this module does at
+ kernel shutdown.
+
+ This is only for Iris machines from EuroBraille.
+
+ If unused, say N.
+
config SCHED_OMIT_FRAME_POINTER
def_bool y
prompt "Single-depth WCHAN output"
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 8e62185..c8bfe63 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -124,6 +124,7 @@ enum {
X86_SUBARCH_LGUEST,
X86_SUBARCH_XEN,
X86_SUBARCH_MRST,
+ X86_SUBARCH_CE4100,
X86_NR_SUBARCHS,
};
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 4d293dc..139591a 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -117,6 +117,10 @@ enum fixed_addresses {
FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */
FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
__end_of_permanent_fixed_addresses,
+
+#ifdef CONFIG_X86_MRST
+ FIX_LNW_VRTC,
+#endif
/*
* 256 temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h
new file mode 100644
index 0000000..73668ab
--- /dev/null
+++ b/arch/x86/include/asm/mrst-vrtc.h
@@ -0,0 +1,9 @@
+#ifndef _MRST_VRTC_H
+#define _MRST_VRTC_H
+
+extern unsigned char vrtc_cmos_read(unsigned char reg);
+extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
+extern unsigned long vrtc_get_time(void);
+extern int vrtc_set_mmss(unsigned long nowtime);
+
+#endif
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 4a711a6..719f00b 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -14,7 +14,9 @@
#include <linux/sfi.h>
extern int pci_mrst_init(void);
-int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int sfi_mrtc_num;
+extern struct sfi_rtc_table_entry sfi_mrtc_array[];
/*
* Medfield is the follow-up of Moorestown, it combines two chip solution into
@@ -50,4 +52,14 @@ extern void mrst_early_console_init(void);
extern struct console early_hsu_console;
extern void hsu_early_console_init(void);
+
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
+/* VRTC timer */
+#define MRST_VRTC_MAP_SZ (1024)
+/*#define MRST_VRTC_PGOFFSET (0xc00) */
+
+extern void mrst_rtc_init(void);
+
#endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index d6763b1..db8aa19 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -53,6 +53,12 @@ extern void x86_mrst_early_setup(void);
static inline void x86_mrst_early_setup(void) { }
#endif
+#ifdef CONFIG_X86_INTEL_CE
+extern void x86_ce4100_early_setup(void);
+#else
+static inline void x86_ce4100_early_setup(void) { }
+#endif
+
#ifndef _SETUP
/*
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9e13763..f60153d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -84,7 +84,6 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_APB_TIMER) += apb_timer.o
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 92543c7..7c9ab59 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -315,6 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev)
if (system_state == SYSTEM_BOOTING) {
irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
+ irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
/* APB timer irqs are set up as mp_irqs, timer is edge type */
__set_irq_handler(adev->irq, handle_edge_irq, 0, "edge");
if (request_irq(adev->irq, apbt_interrupt_handler,
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 4572f25..cd28a35 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf)
if (!strncmp(buf, "xen", 3))
early_console_register(&xenboot_console, keep);
#endif
-#ifdef CONFIG_X86_MRST_EARLY_PRINTK
+#ifdef CONFIG_EARLY_PRINTK_MRST
if (!strncmp(buf, "mrst", 4)) {
mrst_early_console_init();
early_console_register(&early_mrst_console, keep);
@@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf)
hsu_early_console_init();
early_console_register(&early_hsu_console, keep);
}
-
#endif
buf++;
}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 7633101..7f138b3 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -61,6 +61,9 @@ void __init i386_start_kernel(void)
case X86_SUBARCH_MRST:
x86_mrst_early_setup();
break;
+ case X86_SUBARCH_CE4100:
+ x86_ce4100_early_setup();
+ break;
default:
i386_default_early_setup();
break;
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index fda313e..c8e41e9 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -43,17 +43,33 @@ static void rdc321x_reset(struct pci_dev *dev)
outb(1, 0x92);
}
+static void ce4100_reset(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < 10; i++) {
+ outb(0x2, 0xcf9);
+ udelay(50);
+ }
+}
+
struct device_fixup {
unsigned int vendor;
unsigned int device;
void (*reboot_fixup)(struct pci_dev *);
};
+/*
+ * PCI ids solely used for fixups_table go here
+ */
+#define PCI_DEVICE_ID_INTEL_CE4100 0x0708
+
static const struct device_fixup fixups_table[] = {
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset },
+{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset },
};
/*
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index effd96e..6b8759f 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_OLPC) += olpc.o
obj-$(CONFIG_PCI_XEN) += xen.o
obj-y += fixup.o
+obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
new file mode 100644
index 0000000..85b68ef
--- /dev/null
+++ b/arch/x86/pci/ce4100.c
@@ -0,0 +1,315 @@
+/*
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation
+ * 2200 Mission College Blvd.
+ * Santa Clara, CA 97052
+ *
+ * This provides access methods for PCI registers that mis-behave on
+ * the CE4100. Each register can be assigned a private init, read and
+ * write routine. The exception to this is the bridge device. The
+ * bridge device is the only device on bus zero (0) that requires any
+ * fixup so it is a special case ATM
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/pci_x86.h>
+
+struct sim_reg {
+ u32 value;
+ u32 mask;
+};
+
+struct sim_dev_reg {
+ int dev_func;
+ int reg;
+ void (*init)(struct sim_dev_reg *reg);
+ void (*read)(struct sim_dev_reg *reg, u32 *value);
+ void (*write)(struct sim_dev_reg *reg, u32 value);
+ struct sim_reg sim_reg;
+};
+
+struct sim_reg_op {
+ void (*init)(struct sim_dev_reg *reg);
+ void (*read)(struct sim_dev_reg *reg, u32 value);
+ void (*write)(struct sim_dev_reg *reg, u32 value);
+};
+
+#define MB (1024 * 1024)
+#define KB (1024)
+#define SIZE_TO_MASK(size) (~(size - 1))
+
+#define DEFINE_REG(device, func, offset, size, init_op, read_op, write_op)\
+{ PCI_DEVFN(device, func), offset, init_op, read_op, write_op,\
+ {0, SIZE_TO_MASK(size)} },
+
+static void reg_init(struct sim_dev_reg *reg)
+{
+ pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4,
+ ®->sim_reg.value);
+}
+
+static void reg_read(struct sim_dev_reg *reg, u32 *value)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ *value = reg->sim_reg.value;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
+static void reg_write(struct sim_dev_reg *reg, u32 value)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ reg->sim_reg.value = (value & reg->sim_reg.mask) |
+ (reg->sim_reg.value & ~reg->sim_reg.mask);
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
+static void sata_reg_init(struct sim_dev_reg *reg)
+{
+ pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4,
+ ®->sim_reg.value);
+ reg->sim_reg.value += 0x400;
+}
+
+static void ehci_reg_read(struct sim_dev_reg *reg, u32 *value)
+{
+ reg_read(reg, value);
+ if (*value != reg->sim_reg.mask)
+ *value |= 0x100;
+}
+
+void sata_revid_init(struct sim_dev_reg *reg)
+{
+ reg->sim_reg.value = 0x01060100;
+ reg->sim_reg.mask = 0;
+}
+
+static void sata_revid_read(struct sim_dev_reg *reg, u32 *value)
+{
+ reg_read(reg, value);
+}
+
+static struct sim_dev_reg bus1_fixups[] = {
+ DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(8, 0, 0x10, (1*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(9, 0, 0x10 , (1*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(9, 0, 0x14, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(10, 0, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(10, 0, 0x14, (256*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 0, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 0, 0x14, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 1, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 2, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 2, 0x14, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 2, 0x18, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 3, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 3, 0x14, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 4, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
+ DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
+ DEFINE_REG(13, 0, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write)
+ DEFINE_REG(13, 1, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write)
+ DEFINE_REG(14, 0, 0x8, 0, sata_revid_init, sata_revid_read, 0)
+ DEFINE_REG(14, 0, 0x10, 0, reg_init, reg_read, reg_write)
+ DEFINE_REG(14, 0, 0x14, 0, reg_init, reg_read, reg_write)
+ DEFINE_REG(14, 0, 0x18, 0, reg_init, reg_read, reg_write)
+ DEFINE_REG(14, 0, 0x1C, 0, reg_init, reg_read, reg_write)
+ DEFINE_REG(14, 0, 0x20, 0, reg_init, reg_read, reg_write)
+ DEFINE_REG(14, 0, 0x24, (0x200), sata_reg_init, reg_read, reg_write)
+ DEFINE_REG(15, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(15, 0, 0x14, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+};
+
+static void __init init_sim_regs(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
+ if (bus1_fixups[i].init)
+ bus1_fixups[i].init(&bus1_fixups[i]);
+ }
+}
+
+static inline void extract_bytes(u32 *value, int reg, int len)
+{
+ uint32_t mask;
+
+ *value >>= ((reg & 3) * 8);
+ mask = 0xFFFFFFFF >> ((4 - len) * 8);
+ *value &= mask;
+}
+
+int bridge_read(unsigned int devfn, int reg, int len, u32 *value)
+{
+ u32 av_bridge_base, av_bridge_limit;
+ int retval = 0;
+
+ switch (reg) {
+ /* Make BARs appear to not request any memory. */
+ case PCI_BASE_ADDRESS_0:
+ case PCI_BASE_ADDRESS_0 + 1:
+ case PCI_BASE_ADDRESS_0 + 2:
+ case PCI_BASE_ADDRESS_0 + 3:
+ *value = 0;
+ break;
+
+ /* Since subordinate bus number register is hardwired
+ * to zero and read only, so do the simulation.
+ */
+ case PCI_PRIMARY_BUS:
+ if (len == 4)
+ *value = 0x00010100;
+ break;
+
+ case PCI_SUBORDINATE_BUS:
+ *value = 1;
+ break;
+
+ case PCI_MEMORY_BASE:
+ case PCI_MEMORY_LIMIT:
+ /* Get the A/V bridge base address. */
+ pci_direct_conf1.read(0, 0, devfn,
+ PCI_BASE_ADDRESS_0, 4, &av_bridge_base);
+
+ av_bridge_limit = av_bridge_base + (512*MB - 1);
+ av_bridge_limit >>= 16;
+ av_bridge_limit &= 0xFFF0;
+
+ av_bridge_base >>= 16;
+ av_bridge_base &= 0xFFF0;
+
+ if (reg == PCI_MEMORY_LIMIT)
+ *value = av_bridge_limit;
+ else if (len == 2)
+ *value = av_bridge_base;
+ else
+ *value = (av_bridge_limit << 16) | av_bridge_base;
+ break;
+ /* Make prefetchable memory limit smaller than prefetchable
+ * memory base, so not claim prefetchable memory space.
+ */
+ case PCI_PREF_MEMORY_BASE:
+ *value = 0xFFF0;
+ break;
+ case PCI_PREF_MEMORY_LIMIT:
+ *value = 0x0;
+ break;
+ /* Make IO limit smaller than IO base, so not claim IO space. */
+ case PCI_IO_BASE:
+ *value = 0xF0;
+ break;
+ case PCI_IO_LIMIT:
+ *value = 0;
+ break;
+ default:
+ retval = 1;
+ }
+ return retval;
+}
+
+static int ce4100_conf_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ int i, retval = 1;
+
+ if (bus == 1) {
+ for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
+ if (bus1_fixups[i].dev_func == devfn &&
+ bus1_fixups[i].reg == (reg & ~3) &&
+ bus1_fixups[i].read) {
+ bus1_fixups[i].read(&(bus1_fixups[i]),
+ value);
+ extract_bytes(value, reg, len);
+ return 0;
+ }
+ }
+ }
+
+ if (bus == 0 && (PCI_DEVFN(1, 0) == devfn) &&
+ !bridge_read(devfn, reg, len, value))
+ return 0;
+
+ return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
+}
+
+static int ce4100_conf_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ int i;
+
+ if (bus == 1) {
+ for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
+ if (bus1_fixups[i].dev_func == devfn &&
+ bus1_fixups[i].reg == (reg & ~3) &&
+ bus1_fixups[i].write) {
+ bus1_fixups[i].write(&(bus1_fixups[i]),
+ value);
+ return 0;
+ }
+ }
+ }
+
+ /* Discard writes to A/V bridge BAR. */
+ if (bus == 0 && PCI_DEVFN(1, 0) == devfn &&
+ ((reg & ~3) == PCI_BASE_ADDRESS_0))
+ return 0;
+
+ return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
+}
+
+struct pci_raw_ops ce4100_pci_conf = {
+ .read = ce4100_conf_read,
+ .write = ce4100_conf_write,
+};
+
+static int __init ce4100_pci_init(void)
+{
+ init_sim_regs();
+ raw_pci_ops = &ce4100_pci_conf;
+ return 0;
+}
+subsys_initcall(ce4100_pci_init);
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 7bf70b8..021eee9 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,5 +1,7 @@
# Platform specific code goes here
+obj-y += ce4100/
obj-y += efi/
+obj-y += iris/
obj-y += mrst/
obj-y += olpc/
obj-y += scx200/
diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile
new file mode 100644
index 0000000..91fc929
--- /dev/null
+++ b/arch/x86/platform/ce4100/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 0000000..d2c0d51
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,132 @@
+/*
+ * Intel CE4100 platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+static int ce4100_i8042_detect(void)
+{
+ return 0;
+}
+
+static void __init sdv_find_smp_config(void)
+{
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int ret, ier, lsr;
+
+ if (offset == UART_IIR) {
+ offset = offset << p->regshift;
+ ret = readl(p->membase + offset);
+ if (ret & UART_IIR_NO_INT) {
+ /* see if the TX interrupt should have really set */
+ ier = mem_serial_in(p, UART_IER);
+ /* see if the UART's XMIT interrupt is enabled */
+ if (ier & UART_IER_THRI) {
+ lsr = mem_serial_in(p, UART_LSR);
+ /* now check to see if the UART should be
+ generating an interrupt (but isn't) */
+ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+ ret &= ~UART_IIR_NO_INT;
+ }
+ }
+ } else
+ ret = mem_serial_in(p, offset);
+ return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+ unsigned short *capabilites)
+{
+#ifdef CONFIG_EARLY_PRINTK
+ /*
+ * Over ride the legacy port configuration that comes from
+ * asm/serial.h. Using the ioport driver then switching to the
+ * PCI memmaped driver hangs the IOAPIC
+ */
+ if (up->iotype != UPIO_MEM32) {
+ up->uartclk = 14745600;
+ up->mapbase = 0xdffe0200;
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+ up->mapbase & PAGE_MASK);
+ up->membase =
+ (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ up->membase += up->mapbase & ~PAGE_MASK;
+ up->iotype = UPIO_MEM32;
+ up->regshift = 2;
+ }
+#endif
+ up->iobase = 0;
+ up->serial_in = ce4100_mem_serial_in;
+ up->serial_out = ce4100_mem_serial_out;
+
+ *capabilites |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+ serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void);
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+ sdv_serial_fixup();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+ x86_init.oem.arch_setup = sdv_arch_setup;
+ x86_platform.i8042_detect = ce4100_i8042_detect;
+ x86_init.resources.probe_roms = x86_init_noop;
+ x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+ x86_init.mpparse.find_smp_config = sdv_find_smp_config;
+}
diff --git a/arch/x86/platform/iris/Makefile b/arch/x86/platform/iris/Makefile
new file mode 100644
index 0000000..db92198
--- /dev/null
+++ b/arch/x86/platform/iris/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_32_IRIS) += iris.o
diff --git a/arch/x86/platform/iris/iris.c b/arch/x86/platform/iris/iris.c
new file mode 100644
index 0000000..1ba7f5e
--- /dev/null
+++ b/arch/x86/platform/iris/iris.c
@@ -0,0 +1,91 @@
+/*
+ * Eurobraille/Iris power off support.
+ *
+ * Eurobraille's Iris machine is a PC with no APM or ACPI support.
+ * It is shutdown by a special I/O sequence which this module provides.
+ *
+ * Copyright (C) Shérab <Sebastien.Hinderer@...-lyon.org>
+ *
+ * This program is free software ; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation ; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY ; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the program ; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+
+#define IRIS_GIO_BASE 0x340
+#define IRIS_GIO_INPUT IRIS_GIO_BASE
+#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1)
+#define IRIS_GIO_PULSE 0x80 /* First byte to send */
+#define IRIS_GIO_REST 0x00 /* Second byte to send */
+#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sébastien Hinderer <Sebastien.Hinderer@...-lyon.org>");
+MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille");
+MODULE_SUPPORTED_DEVICE("Eurobraille/Iris");
+
+static int force;
+
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation.");
+
+static void (*old_pm_power_off)(void);
+
+static void iris_power_off(void)
+{
+ outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT);
+ msleep(850);
+ outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT);
+}
+
+/*
+ * Before installing the power_off handler, try to make sure the OS is
+ * running on an Iris. Since Iris does not support DMI, this is done
+ * by reading its input port and seeing whether the read value is
+ * meaningful.
+ */
+static int iris_init(void)
+{
+ unsigned char status;
+ if (force != 1) {
+ printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n");
+ return -ENODEV;
+ }
+ status = inb(IRIS_GIO_INPUT);
+ if (status == IRIS_GIO_NODEV) {
+ printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n");
+ return -ENODEV;
+ }
+ old_pm_power_off = pm_power_off;
+ pm_power_off = &iris_power_off;
+ printk(KERN_INFO "Iris power_off handler installed.\n");
+
+ return 0;
+}
+
+static void iris_exit(void)
+{
+ pm_power_off = old_pm_power_off;
+ printk(KERN_INFO "Iris power_off handler uninstalled.\n");
+}
+
+module_init(iris_init);
+module_exit(iris_exit);
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index efbbc55..f61ccdd 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1 +1,3 @@
obj-$(CONFIG_X86_MRST) += mrst.o
+obj-$(CONFIG_X86_MRST) += vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o
diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
similarity index 100%
rename from arch/x86/kernel/early_printk_mrst.c
rename to arch/x86/platform/mrst/early_printk_mrst.c
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 79ae681..fee0b49 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -9,9 +9,19 @@
* as published by the Free Software Foundation; version 2
* of the License.
*/
+
+#define pr_fmt(fmt) "mrst: " fmt
+
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -23,7 +33,9 @@
#include <asm/mrst.h>
#include <asm/io.h>
#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
+#include <asm/reboot.h>
/*
* the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
@@ -102,10 +114,10 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table)
memcpy(sfi_mtimer_array, pentry, totallen);
}
- printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num);
+ pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
pentry = sfi_mtimer_array;
for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
- printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz,"
+ pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
" irq = %d\n", totallen, (u32)pentry->phys_addr,
pentry->freq_hz, pentry->irq);
if (!pentry->irq)
@@ -176,14 +188,14 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
memcpy(sfi_mrtc_array, pentry, totallen);
}
- printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num);
+ pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
pentry = sfi_mrtc_array;
for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
- printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n",
+ pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
totallen, (u32)pentry->phys_addr, pentry->irq);
mp_irq.type = MP_IOAPIC;
mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = 0;
+ mp_irq.irqflag = 0xf; /* level trigger and active low */
mp_irq.srcbus = 0;
mp_irq.srcbusirq = pentry->irq; /* IRQ */
mp_irq.dstapic = MP_APIC_ALL;
@@ -209,6 +221,7 @@ static unsigned long __init mrst_calibrate_tsc(void)
void __init mrst_time_init(void)
{
+ sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
switch (mrst_timer_options) {
case MRST_TIMER_APBT_ONLY:
break;
@@ -224,16 +237,10 @@ void __init mrst_time_init(void)
return;
}
/* we need at least one APB timer */
- sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
pre_init_apic_IRQ0();
apbt_time_init();
}
-void __init mrst_rtc_init(void)
-{
- sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-}
-
void __cpuinit mrst_arch_setup(void)
{
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
@@ -256,6 +263,17 @@ static int mrst_i8042_detect(void)
return 0;
}
+/* Reboot and power off are handled by the SCU on a MID device */
+static void mrst_power_off(void)
+{
+ intel_scu_ipc_simple_command(0xf1, 1);
+}
+
+static void mrst_reboot(void)
+{
+ intel_scu_ipc_simple_command(0xf1, 0);
+}
+
/*
* Moorestown specific x86_init function overrides and early setup
* calls.
@@ -281,6 +299,10 @@ void __init x86_mrst_early_setup(void)
legacy_pic = &null_legacy_pic;
+ /* Moorestown specific power_off/restart method */
+ pm_power_off = mrst_power_off;
+ machine_ops.emergency_restart = mrst_reboot;
+
/* Avoid searching for BIOS MP tables */
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
@@ -309,3 +331,505 @@ static inline int __init setup_x86_mrst_timer(char *arg)
return 0;
}
__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static struct sfi_gpio_table_entry *gpio_table;
+static int gpio_num_entry;
+
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_gpio_table_entry *pentry;
+ int num, i;
+
+ if (gpio_table)
+ return 0;
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+ pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+ gpio_table = (struct sfi_gpio_table_entry *)
+ kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+ if (!gpio_table)
+ return -1;
+ memcpy(gpio_table, pentry, num * sizeof(*pentry));
+ gpio_num_entry = num;
+
+ pr_debug("GPIO pin info:\n");
+ for (i = 0; i < num; i++, pentry++)
+ pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+ " pin = %d\n", i,
+ pentry->controller_name,
+ pentry->pin_name,
+ pentry->pin_no);
+ return 0;
+}
+
+static int get_gpio_by_name(const char *name)
+{
+ struct sfi_gpio_table_entry *pentry = gpio_table;
+ int i;
+
+ if (!pentry)
+ return -1;
+ for (i = 0; i < gpio_num_entry; i++, pentry++) {
+ if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+ return pentry->pin_no;
+ }
+ return -1;
+}
+
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+ char name[SFI_NAME_LEN + 1];
+ u8 type;
+ u8 delay;
+ void *(*get_platform_data)(void *info);
+};
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MRST_IRQ_OFFSET 0x100
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+ static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+ int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+ if (gpio_base == -1)
+ gpio_base = 64;
+ pmic_gpio_pdata.gpio_base = gpio_base;
+ pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+ return &pmic_gpio_pdata;
+}
+
+static void __init *max3111_platform_data(void *info)
+{
+ struct spi_board_info *spi_info = info;
+ int intr = get_gpio_by_name("max3111_int");
+
+ if (intr == -1)
+ return NULL;
+ spi_info->irq = intr + MRST_IRQ_OFFSET;
+ return NULL;
+}
+
+/* we have multiple max7315 on the board ... */
+#define MAX7315_NUM 2
+static void __init *max7315_platform_data(void *info)
+{
+ static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+ static int nr;
+ struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ if (nr == MAX7315_NUM) {
+ pr_err("too many max7315s, we only support %d\n",
+ MAX7315_NUM);
+ return NULL;
+ }
+ /* we have several max7315 on the board, we only need load several
+ * instances of the same pca953x driver to cover them
+ */
+ strcpy(i2c_info->type, "max7315");
+ if (nr++) {
+ sprintf(base_pin_name, "max7315_%d_base", nr);
+ sprintf(intr_pin_name, "max7315_%d_int", nr);
+ } else {
+ strcpy(base_pin_name, "max7315_base");
+ strcpy(intr_pin_name, "max7315_int");
+ }
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ max7315->gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ max7315->irq_base = -1;
+ }
+ return max7315;
+}
+
+static void __init *emc1403_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("thermal_int");
+ int intr2nd = get_gpio_by_name("thermal_alert");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static void __init *lis331dl_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("accel_int");
+ int intr2nd = get_gpio_by_name("accel_2");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static void __init *no_platform_data(void *info)
+{
+ return NULL;
+}
+
+static const struct devs_id __initconst device_ids[] = {
+ {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+ {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
+ {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
+ {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
+ {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+ {},
+};
+
+#define MAX_IPCDEVS 24
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static int ipc_next_dev;
+
+#define MAX_SCU_SPI 24
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static int spi_next_dev;
+
+#define MAX_SCU_I2C 24
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static int i2c_bus[MAX_SCU_I2C];
+static int i2c_next_dev;
+
+static void __init intel_scu_device_register(struct platform_device *pdev)
+{
+ if(ipc_next_dev == MAX_IPCDEVS)
+ pr_err("too many SCU IPC devices");
+ else
+ ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+ struct spi_board_info *new_dev;
+
+ if (spi_next_dev == MAX_SCU_SPI) {
+ pr_err("too many SCU SPI devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed spi dev %s\n",
+ sdev->modalias);
+ return;
+ }
+ memcpy(new_dev, sdev, sizeof(*sdev));
+
+ spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+ struct i2c_board_info *idev)
+{
+ struct i2c_board_info *new_dev;
+
+ if (i2c_next_dev == MAX_SCU_I2C) {
+ pr_err("too many SCU I2C devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed i2c dev %s\n",
+ idev->type);
+ return;
+ }
+ memcpy(new_dev, idev, sizeof(*idev));
+
+ i2c_bus[i2c_next_dev] = bus;
+ i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_add(ipc_devs[i]);
+
+ for (i = 0; i < spi_next_dev; i++)
+ spi_register_board_info(spi_devs[i], 1);
+
+ for (i = 0; i < i2c_next_dev; i++) {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ adapter = i2c_get_adapter(i2c_bus[i]);
+ if (adapter) {
+ client = i2c_new_device(adapter, i2c_devs[i]);
+ if (!client)
+ pr_err("can't create i2c device %s\n",
+ i2c_devs[i]->type);
+ } else
+ i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+ }
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+ /* Single threaded */
+ static struct resource __initdata res = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+ res.start = irq;
+ platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_IPC &&
+ !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(pdev);
+ break;
+ }
+ dev++;
+ }
+ pdev->dev.platform_data = pdata;
+ intel_scu_device_register(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_SPI &&
+ !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(spi_info);
+ break;
+ }
+ dev++;
+ }
+ spi_info->platform_data = pdata;
+ if (dev->delay)
+ intel_scu_spi_device_register(spi_info);
+ else
+ spi_register_board_info(spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_I2C &&
+ !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(i2c_info);
+ break;
+ }
+ dev++;
+ }
+ i2c_info->platform_data = pdata;
+
+ if (dev->delay)
+ intel_scu_i2c_device_register(bus, i2c_info);
+ else
+ i2c_register_board_info(bus, i2c_info, 1);
+ }
+
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_device_table_entry *pentry;
+ struct spi_board_info spi_info;
+ struct i2c_board_info i2c_info;
+ struct platform_device *pdev;
+ int num, i, bus;
+ int ioapic;
+ struct io_apic_irq_attr irq_attr;
+
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+ pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+ for (i = 0; i < num; i++, pentry++) {
+ if (pentry->irq != (u8)0xff) { /* native RTE case */
+ /* these SPI2 devices are not exposed to system as PCI
+ * devices, but they have separate RTE entry in IOAPIC
+ * so we have to enable them one by one here
+ */
+ ioapic = mp_find_ioapic(pentry->irq);
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = pentry->irq;
+ irq_attr.trigger = 1;
+ irq_attr.polarity = 1;
+ io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
+ }
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ /* ID as IRQ is a hack that will go away */
+ pdev = platform_device_alloc(pentry->name, pentry->irq);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ pentry->name);
+ continue;
+ }
+ install_irq_resource(pdev, pentry->irq);
+ pr_debug("info[%2d]: IPC bus, name = %16.16s, "
+ "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ sfi_handle_ipc_dev(pdev);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ memset(&spi_info, 0, sizeof(spi_info));
+ strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+ spi_info.irq = pentry->irq;
+ spi_info.bus_num = pentry->host_num;
+ spi_info.chip_select = pentry->addr;
+ spi_info.max_speed_hz = pentry->max_freq;
+ pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
+ "irq = 0x%2x, max_freq = %d, cs = %d\n", i,
+ spi_info.bus_num,
+ spi_info.modalias,
+ spi_info.irq,
+ spi_info.max_speed_hz,
+ spi_info.chip_select);
+ sfi_handle_spi_dev(&spi_info);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ memset(&i2c_info, 0, sizeof(i2c_info));
+ bus = pentry->host_num;
+ strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+ i2c_info.irq = pentry->irq;
+ i2c_info.addr = pentry->addr;
+ pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
+ "irq = 0x%2x, addr = 0x%x\n", i, bus,
+ i2c_info.type,
+ i2c_info.irq,
+ i2c_info.addr);
+ sfi_handle_i2c_dev(bus, &i2c_info);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ ;
+ }
+ }
+ return 0;
+}
+
+static int __init mrst_platform_init(void)
+{
+ sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+ sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+ return 0;
+}
+arch_initcall(mrst_platform_init);
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+ {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
+ {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
+ {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
+ {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
+ {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
+ {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
+ {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
+ {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
+};
+
+static struct gpio_keys_platform_data mrst_gpio_keys = {
+ .buttons = gpio_button,
+ .rep = 1,
+ .nbuttons = -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mrst_gpio_keys,
+ },
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+ struct gpio_keys_button *gb = gpio_button;
+ int i, num, good = 0;
+
+ num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+ for (i = 0; i < num; i++) {
+ gb[i].gpio = get_gpio_by_name(gb[i].desc);
+ if (gb[i].gpio == -1)
+ continue;
+
+ if (i != good)
+ gb[good] = gb[i];
+ good++;
+ }
+
+ if (good) {
+ mrst_gpio_keys.nbuttons = good;
+ return platform_device_register(&pb_device);
+ }
+ return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
new file mode 100644
index 0000000..32cd7ed
--- /dev/null
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -0,0 +1,165 @@
+/*
+ * vrtc.c: Driver for virtual RTC device on Intel MID platform
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based on RTC CMOS driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+
+#include <asm/mrst.h>
+#include <asm/mrst-vrtc.h>
+#include <asm/time.h>
+#include <asm/fixmap.h>
+
+static unsigned char __iomem *vrtc_virt_base;
+
+unsigned char vrtc_cmos_read(unsigned char reg)
+{
+ unsigned char retval;
+
+ /* vRTC's registers range from 0x0 to 0xD */
+ if (reg > 0xd || !vrtc_virt_base)
+ return 0xff;
+
+ lock_cmos_prefix(reg);
+ retval = __raw_readb(vrtc_virt_base + (reg << 2));
+ lock_cmos_suffix(reg);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_read);
+
+void vrtc_cmos_write(unsigned char val, unsigned char reg)
+{
+ if (reg > 0xd || !vrtc_virt_base)
+ return;
+
+ lock_cmos_prefix(reg);
+ __raw_writeb(val, vrtc_virt_base + (reg << 2));
+ lock_cmos_suffix(reg);
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_write);
+
+unsigned long vrtc_get_time(void)
+{
+ u8 sec, min, hour, mday, mon;
+ u32 year;
+
+ while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
+ cpu_relax();
+
+ sec = vrtc_cmos_read(RTC_SECONDS);
+ min = vrtc_cmos_read(RTC_MINUTES);
+ hour = vrtc_cmos_read(RTC_HOURS);
+ mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+ mon = vrtc_cmos_read(RTC_MONTH);
+ year = vrtc_cmos_read(RTC_YEAR);
+
+ /* vRTC YEAR reg contains the offset to 1960 */
+ year += 1960;
+
+ printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
+ "mon: %d year: %d\n", sec, min, hour, mday, mon, year);
+
+ return mktime(year, mon, mday, hour, min, sec);
+}
+
+/* Only care about the minutes and seconds */
+int vrtc_set_mmss(unsigned long nowtime)
+{
+ int real_sec, real_min;
+ int vrtc_min;
+
+ vrtc_min = vrtc_cmos_read(RTC_MINUTES);
+
+ real_sec = nowtime % 60;
+ real_min = nowtime / 60;
+ if (((abs(real_min - vrtc_min) + 15)/30) & 1)
+ real_min += 30;
+ real_min %= 60;
+
+ vrtc_cmos_write(real_sec, RTC_SECONDS);
+ vrtc_cmos_write(real_min, RTC_MINUTES);
+ return 0;
+}
+
+void __init mrst_rtc_init(void)
+{
+ unsigned long rtc_paddr;
+ void __iomem *virt_base;
+
+ sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+ if (!sfi_mrtc_num)
+ return;
+
+ rtc_paddr = sfi_mrtc_array[0].phys_addr;
+
+ /* vRTC's register address may not be page aligned */
+ set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr);
+
+ virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC);
+ virt_base += rtc_paddr & ~PAGE_MASK;
+ vrtc_virt_base = virt_base;
+
+ x86_platform.get_wallclock = vrtc_get_time;
+ x86_platform.set_wallclock = vrtc_set_mmss;
+}
+
+/*
+ * The Moorestown platform has a memory mapped virtual RTC device that emulates
+ * the programming interface of the RTC.
+ */
+
+static struct resource vrtc_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device vrtc_device = {
+ .name = "rtc_mrst",
+ .id = -1,
+ .resource = vrtc_resources,
+ .num_resources = ARRAY_SIZE(vrtc_resources),
+};
+
+/* Register the RTC device if appropriate */
+static int __init mrst_device_create(void)
+{
+ /* No Moorestown, no device */
+ if (!mrst_identify_cpu())
+ return -ENODEV;
+ /* No timer, no device */
+ if (!sfi_mrtc_num)
+ return -ENODEV;
+
+ /* iomem resource */
+ vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
+ vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
+ MRST_VRTC_MAP_SZ;
+ /* irq resource */
+ vrtc_resources[1].start = sfi_mrtc_array[0].irq;
+ vrtc_resources[1].end = sfi_mrtc_array[0].irq;
+
+ return platform_device_register(&vrtc_device);
+}
+
+module_init(mrst_device_create);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 41a9e34..ca35b0c 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -26,6 +26,7 @@
#include <linux/sfi.h>
#include <asm/mrst.h>
#include <asm/intel_scu_ipc.h>
+#include <asm/mrst.h>
/* IPC defines the following message types */
#define IPCMSG_WATCHDOG_TIMER 0xF8 /* Set Kernel Watchdog Threshold */
@@ -699,6 +700,9 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
iounmap(ipcdev.ipc_base);
return -ENOMEM;
}
+
+ intel_scu_devices_create();
+
return 0;
}
@@ -720,6 +724,7 @@ static void ipc_remove(struct pci_dev *pdev)
iounmap(ipcdev.ipc_base);
iounmap(ipcdev.i2c_base);
ipcdev.pdev = NULL;
+ intel_scu_devices_destroy();
}
static const struct pci_device_id pci_ids[] = {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 2883428..4941cad 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -463,6 +463,18 @@ config RTC_DRV_CMOS
This driver can also be built as a module. If so, the module
will be called rtc-cmos.
+config RTC_DRV_VRTC
+ tristate "Virtual RTC for Moorestown platforms"
+ depends on X86_MRST
+ default y if X86_MRST
+
+ help
+ Say "yes" here to get direct support for the real time clock
+ found on Moorestown platforms. The VRTC is a emulated RTC that
+ derives its clock source from a real RTC in the PMIC. The MC146818
+ style programming interface is mostly conserved, but any
+ updates are done via IPC calls to the system controller FW.
+
config RTC_DRV_DS1216
tristate "Dallas DS1216"
depends on SNI_RM
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4c2832d..2afdaf3 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
obj-$(CONFIG_RTC_DRV_COH901331) += rtc-coh901331.o
obj-$(CONFIG_RTC_DRV_DAVINCI) += rtc-davinci.o
obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o
+obj-$(CONFIG_RTC_DRV_VRTC) += rtc-mrst.o
obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o
obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
new file mode 100644
index 0000000..bcd0cf6
--- /dev/null
+++ b/drivers/rtc/rtc-mrst.c
@@ -0,0 +1,582 @@
+/*
+ * rtc-mrst.c: Driver for Moorestown virtual RTC
+ *
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@...el.com)
+ * Feng Tang (feng.tang@...el.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based upon drivers/rtc/rtc-cmos.c
+ */
+
+/*
+ * Note:
+ * * vRTC only supports binary mode and 24H mode
+ * * vRTC only support PIE and AIE, no UIE, and its PIE only happens
+ * at 23:59:59pm everyday, no support for adjustable frequency
+ * * Alarm function is also limited to hr/min/sec.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+
+#include <asm-generic/rtc.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/mrst.h>
+#include <asm/mrst-vrtc.h>
+
+struct mrst_rtc {
+ struct rtc_device *rtc;
+ struct device *dev;
+ int irq;
+ struct resource *iomem;
+
+ u8 enabled_wake;
+ u8 suspend_ctrl;
+};
+
+static const char driver_name[] = "rtc_mrst";
+
+#define RTC_IRQMASK (RTC_PF | RTC_AF)
+
+static inline int is_intr(u8 rtc_intr)
+{
+ if (!(rtc_intr & RTC_IRQF))
+ return 0;
+ return rtc_intr & RTC_IRQMASK;
+}
+
+/*
+ * rtc_time's year contains the increment over 1900, but vRTC's YEAR
+ * register can't be programmed to value larger than 0x64, so vRTC
+ * driver chose to use 1960 (1970 is UNIX time start point) as the base,
+ * and does the translation at read/write time.
+ *
+ * Why not just use 1970 as the offset? it's because using 1960 will
+ * make it consistent in leap year setting for both vrtc and low-level
+ * physical rtc devices.
+ */
+static int mrst_read_time(struct device *dev, struct rtc_time *time)
+{
+ unsigned long flags;
+
+ if (rtc_is_updating())
+ mdelay(20);
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ time->tm_sec = vrtc_cmos_read(RTC_SECONDS);
+ time->tm_min = vrtc_cmos_read(RTC_MINUTES);
+ time->tm_hour = vrtc_cmos_read(RTC_HOURS);
+ time->tm_mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+ time->tm_mon = vrtc_cmos_read(RTC_MONTH);
+ time->tm_year = vrtc_cmos_read(RTC_YEAR);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ /* Adjust for the 1960/1900 */
+ time->tm_year += 60;
+ time->tm_mon--;
+ return RTC_24H;
+}
+
+static int mrst_set_time(struct device *dev, struct rtc_time *time)
+{
+ int ret;
+ unsigned long flags;
+ unsigned char mon, day, hrs, min, sec;
+ unsigned int yrs;
+
+ yrs = time->tm_year;
+ mon = time->tm_mon + 1; /* tm_mon starts at zero */
+ day = time->tm_mday;
+ hrs = time->tm_hour;
+ min = time->tm_min;
+ sec = time->tm_sec;
+
+ if (yrs < 70 || yrs > 138)
+ return -EINVAL;
+ yrs -= 60;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ vrtc_cmos_write(yrs, RTC_YEAR);
+ vrtc_cmos_write(mon, RTC_MONTH);
+ vrtc_cmos_write(day, RTC_DAY_OF_MONTH);
+ vrtc_cmos_write(hrs, RTC_HOURS);
+ vrtc_cmos_write(min, RTC_MINUTES);
+ vrtc_cmos_write(sec, RTC_SECONDS);
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME);
+ return ret;
+}
+
+static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ unsigned char rtc_control;
+
+ if (mrst->irq <= 0)
+ return -EIO;
+
+ /* Basic alarms only support hour, minute, and seconds fields.
+ * Some also support day and month, for alarms up to a year in
+ * the future.
+ */
+ t->time.tm_mday = -1;
+ t->time.tm_mon = -1;
+ t->time.tm_year = -1;
+
+ /* vRTC only supports binary mode */
+ spin_lock_irq(&rtc_lock);
+ t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM);
+ t->time.tm_min = vrtc_cmos_read(RTC_MINUTES_ALARM);
+ t->time.tm_hour = vrtc_cmos_read(RTC_HOURS_ALARM);
+
+ rtc_control = vrtc_cmos_read(RTC_CONTROL);
+ spin_unlock_irq(&rtc_lock);
+
+ t->enabled = !!(rtc_control & RTC_AIE);
+ t->pending = 0;
+
+ return 0;
+}
+
+static void mrst_checkintr(struct mrst_rtc *mrst, unsigned char rtc_control)
+{
+ unsigned char rtc_intr;
+
+ /*
+ * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
+ * allegedly some older rtcs need that to handle irqs properly
+ */
+ rtc_intr = vrtc_cmos_read(RTC_INTR_FLAGS);
+ rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+ if (is_intr(rtc_intr))
+ rtc_update_irq(mrst->rtc, 1, rtc_intr);
+}
+
+static void mrst_irq_enable(struct mrst_rtc *mrst, unsigned char mask)
+{
+ unsigned char rtc_control;
+
+ /*
+ * Flush any pending IRQ status, notably for update irqs,
+ * before we enable new IRQs
+ */
+ rtc_control = vrtc_cmos_read(RTC_CONTROL);
+ mrst_checkintr(mrst, rtc_control);
+
+ rtc_control |= mask;
+ vrtc_cmos_write(rtc_control, RTC_CONTROL);
+
+ mrst_checkintr(mrst, rtc_control);
+}
+
+static void mrst_irq_disable(struct mrst_rtc *mrst, unsigned char mask)
+{
+ unsigned char rtc_control;
+
+ rtc_control = vrtc_cmos_read(RTC_CONTROL);
+ rtc_control &= ~mask;
+ vrtc_cmos_write(rtc_control, RTC_CONTROL);
+ mrst_checkintr(mrst, rtc_control);
+}
+
+static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ unsigned char hrs, min, sec;
+ int ret = 0;
+
+ if (!mrst->irq)
+ return -EIO;
+
+ hrs = t->time.tm_hour;
+ min = t->time.tm_min;
+ sec = t->time.tm_sec;
+
+ spin_lock_irq(&rtc_lock);
+ /* Next rtc irq must not be from previous alarm setting */
+ mrst_irq_disable(mrst, RTC_AIE);
+
+ /* Update alarm */
+ vrtc_cmos_write(hrs, RTC_HOURS_ALARM);
+ vrtc_cmos_write(min, RTC_MINUTES_ALARM);
+ vrtc_cmos_write(sec, RTC_SECONDS_ALARM);
+
+ spin_unlock_irq(&rtc_lock);
+
+ ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM);
+ if (ret)
+ return ret;
+
+ spin_lock_irq(&rtc_lock);
+ if (t->enabled)
+ mrst_irq_enable(mrst, RTC_AIE);
+
+ spin_unlock_irq(&rtc_lock);
+
+ return 0;
+}
+
+static int mrst_irq_set_state(struct device *dev, int enabled)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (!mrst->irq)
+ return -ENXIO;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ if (enabled)
+ mrst_irq_enable(mrst, RTC_PIE);
+ else
+ mrst_irq_disable(mrst, RTC_PIE);
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return 0;
+}
+
+#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
+
+/* Currently, the vRTC doesn't support UIE ON/OFF */
+static int
+mrst_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ switch (cmd) {
+ case RTC_AIE_OFF:
+ case RTC_AIE_ON:
+ if (!mrst->irq)
+ return -EINVAL;
+ break;
+ default:
+ /* PIE ON/OFF is handled by mrst_irq_set_state() */
+ return -ENOIOCTLCMD;
+ }
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ switch (cmd) {
+ case RTC_AIE_OFF: /* alarm off */
+ mrst_irq_disable(mrst, RTC_AIE);
+ break;
+ case RTC_AIE_ON: /* alarm on */
+ mrst_irq_enable(mrst, RTC_AIE);
+ break;
+ }
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return 0;
+}
+
+#else
+#define mrst_rtc_ioctl NULL
+#endif
+
+#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
+
+static int mrst_procfs(struct device *dev, struct seq_file *seq)
+{
+ unsigned char rtc_control, valid;
+
+ spin_lock_irq(&rtc_lock);
+ rtc_control = vrtc_cmos_read(RTC_CONTROL);
+ valid = vrtc_cmos_read(RTC_VALID);
+ spin_unlock_irq(&rtc_lock);
+
+ return seq_printf(seq,
+ "periodic_IRQ\t: %s\n"
+ "alarm\t\t: %s\n"
+ "BCD\t\t: no\n"
+ "periodic_freq\t: daily (not adjustable)\n",
+ (rtc_control & RTC_PIE) ? "on" : "off",
+ (rtc_control & RTC_AIE) ? "on" : "off");
+}
+
+#else
+#define mrst_procfs NULL
+#endif
+
+static const struct rtc_class_ops mrst_rtc_ops = {
+ .ioctl = mrst_rtc_ioctl,
+ .read_time = mrst_read_time,
+ .set_time = mrst_set_time,
+ .read_alarm = mrst_read_alarm,
+ .set_alarm = mrst_set_alarm,
+ .proc = mrst_procfs,
+ .irq_set_state = mrst_irq_set_state,
+};
+
+static struct mrst_rtc mrst_rtc;
+
+/*
+ * When vRTC IRQ is captured by SCU FW, FW will clear the AIE bit in
+ * Reg B, so no need for this driver to clear it
+ */
+static irqreturn_t mrst_rtc_irq(int irq, void *p)
+{
+ u8 irqstat;
+
+ spin_lock(&rtc_lock);
+ /* This read will clear all IRQ flags inside Reg C */
+ irqstat = vrtc_cmos_read(RTC_INTR_FLAGS);
+ spin_unlock(&rtc_lock);
+
+ irqstat &= RTC_IRQMASK | RTC_IRQF;
+ if (is_intr(irqstat)) {
+ rtc_update_irq(p, 1, irqstat);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static int __init
+vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
+{
+ int retval = 0;
+ unsigned char rtc_control;
+
+ /* There can be only one ... */
+ if (mrst_rtc.dev)
+ return -EBUSY;
+
+ if (!iomem)
+ return -ENODEV;
+
+ iomem = request_mem_region(iomem->start,
+ iomem->end + 1 - iomem->start,
+ driver_name);
+ if (!iomem) {
+ dev_dbg(dev, "i/o mem already in use.\n");
+ return -EBUSY;
+ }
+
+ mrst_rtc.irq = rtc_irq;
+ mrst_rtc.iomem = iomem;
+
+ mrst_rtc.rtc = rtc_device_register(driver_name, dev,
+ &mrst_rtc_ops, THIS_MODULE);
+ if (IS_ERR(mrst_rtc.rtc)) {
+ retval = PTR_ERR(mrst_rtc.rtc);
+ goto cleanup0;
+ }
+
+ mrst_rtc.dev = dev;
+ dev_set_drvdata(dev, &mrst_rtc);
+ rename_region(iomem, dev_name(&mrst_rtc.rtc->dev));
+
+ spin_lock_irq(&rtc_lock);
+ mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE);
+ rtc_control = vrtc_cmos_read(RTC_CONTROL);
+ spin_unlock_irq(&rtc_lock);
+
+ if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))
+ dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n");
+
+ if (rtc_irq) {
+ retval = request_irq(rtc_irq, mrst_rtc_irq,
+ IRQF_DISABLED, dev_name(&mrst_rtc.rtc->dev),
+ mrst_rtc.rtc);
+ if (retval < 0) {
+ dev_dbg(dev, "IRQ %d is already in use, err %d\n",
+ rtc_irq, retval);
+ goto cleanup1;
+ }
+ }
+ dev_dbg(dev, "initialised\n");
+ return 0;
+
+cleanup1:
+ mrst_rtc.dev = NULL;
+ rtc_device_unregister(mrst_rtc.rtc);
+cleanup0:
+ release_region(iomem->start, iomem->end + 1 - iomem->start);
+ dev_err(dev, "rtc-mrst: unable to initialise\n");
+ return retval;
+}
+
+static void rtc_mrst_do_shutdown(void)
+{
+ spin_lock_irq(&rtc_lock);
+ mrst_irq_disable(&mrst_rtc, RTC_IRQMASK);
+ spin_unlock_irq(&rtc_lock);
+}
+
+static void __exit rtc_mrst_do_remove(struct device *dev)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ struct resource *iomem;
+
+ rtc_mrst_do_shutdown();
+
+ if (mrst->irq)
+ free_irq(mrst->irq, mrst->rtc);
+
+ rtc_device_unregister(mrst->rtc);
+ mrst->rtc = NULL;
+
+ iomem = mrst->iomem;
+ release_region(iomem->start, iomem->end + 1 - iomem->start);
+ mrst->iomem = NULL;
+
+ mrst->dev = NULL;
+ dev_set_drvdata(dev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int mrst_suspend(struct device *dev, pm_message_t mesg)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ unsigned char tmp;
+
+ /* Only the alarm might be a wakeup event source */
+ spin_lock_irq(&rtc_lock);
+ mrst->suspend_ctrl = tmp = vrtc_cmos_read(RTC_CONTROL);
+ if (tmp & (RTC_PIE | RTC_AIE)) {
+ unsigned char mask;
+
+ if (device_may_wakeup(dev))
+ mask = RTC_IRQMASK & ~RTC_AIE;
+ else
+ mask = RTC_IRQMASK;
+ tmp &= ~mask;
+ vrtc_cmos_write(tmp, RTC_CONTROL);
+
+ mrst_checkintr(mrst, tmp);
+ }
+ spin_unlock_irq(&rtc_lock);
+
+ if (tmp & RTC_AIE) {
+ mrst->enabled_wake = 1;
+ enable_irq_wake(mrst->irq);
+ }
+
+ dev_dbg(&mrst_rtc.rtc->dev, "suspend%s, ctrl %02x\n",
+ (tmp & RTC_AIE) ? ", alarm may wake" : "",
+ tmp);
+
+ return 0;
+}
+
+/*
+ * We want RTC alarms to wake us from the deep power saving state
+ */
+static inline int mrst_poweroff(struct device *dev)
+{
+ return mrst_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int mrst_resume(struct device *dev)
+{
+ struct mrst_rtc *mrst = dev_get_drvdata(dev);
+ unsigned char tmp = mrst->suspend_ctrl;
+
+ /* Re-enable any irqs previously active */
+ if (tmp & RTC_IRQMASK) {
+ unsigned char mask;
+
+ if (mrst->enabled_wake) {
+ disable_irq_wake(mrst->irq);
+ mrst->enabled_wake = 0;
+ }
+
+ spin_lock_irq(&rtc_lock);
+ do {
+ vrtc_cmos_write(tmp, RTC_CONTROL);
+
+ mask = vrtc_cmos_read(RTC_INTR_FLAGS);
+ mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+ if (!is_intr(mask))
+ break;
+
+ rtc_update_irq(mrst->rtc, 1, mask);
+ tmp &= ~RTC_AIE;
+ } while (mask & RTC_AIE);
+ spin_unlock_irq(&rtc_lock);
+ }
+
+ dev_dbg(&mrst_rtc.rtc->dev, "resume, ctrl %02x\n", tmp);
+
+ return 0;
+}
+
+#else
+#define mrst_suspend NULL
+#define mrst_resume NULL
+
+static inline int mrst_poweroff(struct device *dev)
+{
+ return -ENOSYS;
+}
+
+#endif
+
+static int __init vrtc_mrst_platform_probe(struct platform_device *pdev)
+{
+ return vrtc_mrst_do_probe(&pdev->dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0),
+ platform_get_irq(pdev, 0));
+}
+
+static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev)
+{
+ rtc_mrst_do_remove(&pdev->dev);
+ return 0;
+}
+
+static void vrtc_mrst_platform_shutdown(struct platform_device *pdev)
+{
+ if (system_state == SYSTEM_POWER_OFF && !mrst_poweroff(&pdev->dev))
+ return;
+
+ rtc_mrst_do_shutdown();
+}
+
+MODULE_ALIAS("platform:vrtc_mrst");
+
+static struct platform_driver vrtc_mrst_platform_driver = {
+ .probe = vrtc_mrst_platform_probe,
+ .remove = __exit_p(vrtc_mrst_platform_remove),
+ .shutdown = vrtc_mrst_platform_shutdown,
+ .driver = {
+ .name = (char *) driver_name,
+ .suspend = mrst_suspend,
+ .resume = mrst_resume,
+ }
+};
+
+static int __init vrtc_mrst_init(void)
+{
+ return platform_driver_register(&vrtc_mrst_platform_driver);
+}
+
+static void __exit vrtc_mrst_exit(void)
+{
+ platform_driver_unregister(&vrtc_mrst_platform_driver);
+}
+
+module_init(vrtc_mrst_init);
+module_exit(vrtc_mrst_exit);
+
+MODULE_AUTHOR("Jacob Pan; Feng Tang");
+MODULE_DESCRIPTION("Driver for Moorestown virtual RTC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/sfi.h b/include/linux/sfi.h
index 7f770c6..fe81791 100644
--- a/include/linux/sfi.h
+++ b/include/linux/sfi.h
@@ -77,6 +77,8 @@
#define SFI_OEM_ID_SIZE 6
#define SFI_OEM_TABLE_ID_SIZE 8
+#define SFI_NAME_LEN 16
+
#define SFI_SYST_SEARCH_BEGIN 0x000E0000
#define SFI_SYST_SEARCH_END 0x000FFFFF
@@ -156,13 +158,13 @@ struct sfi_device_table_entry {
u16 addr;
u8 irq;
u32 max_freq;
- char name[16];
+ char name[SFI_NAME_LEN];
} __packed;
struct sfi_gpio_table_entry {
- char controller_name[16];
+ char controller_name[SFI_NAME_LEN];
u16 pin_no;
- char pin_name[16];
+ char pin_name[SFI_NAME_LEN];
} __packed;
typedef int (*sfi_table_handler) (struct sfi_table_header *table);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists