| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 18 Jan 2011 00:34:24 +0100
From: Christophe Henri RICARD <christophe-h.ricard@...com>
To: Rajiv Andrade <srajiv@...ux.vnet.ibm.com>,
Marcel Selhorst <m.selhorst@...rix.com>
Cc: James Morris <jmorris@...ei.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"joe@...ches.com" <joe@...ches.com>,
matt mooney <mfm@...eddisk.com>,
Sean NEWTON <sean.newton@...com>,
Serge FRUHAUF <serge.fruhauf@...com>,
Mohamed TABET <mohamed.tabet@...com>,
Jean-Luc BLANC <jean-luc.blanc@...com>,
Christophe DELAUNAY <christophe.delaunay@...com>,
Tom BOCCHINO <tom.bocchino@...com>,
Christophe Henri RICARD <christophe-h.ricard@...com>
Subject: [PATCH 1/3] TPM: new stm i2c device driver
Hello Rajiv, James,
As a new year is here, I'm cleaning up some stuff that were kept on the shelves.
Please find below in a plain text format, the updated tpm stm st19np18 i2c driver.
This patch provide in one part the full tpm driver for st19np18 using i2c protocol.
The updates are:
- some code/comment cleaning.
- replace wait_event_interruptible_on_gpio function with wait_for_stat (as found in tpm_tis).
This move the duration
(which is different to timeout according TCG PC Client Specific TPM Interface Specification (TIS) spec: http://www.trustedcomputinggroup.org/files/resource_files/87BCE22B-1D09-3519-ADEBA772FBF02CBD/TCG_PCClientTPMSpecification_1-20_1-00_FINAL.pdf) management to the tpm.c to the tpm_transmit function in tpm.c.
I believe, it makes the driver more similar and easier to understand for everybody (I guess).
- I have tried to take care of my English spelling in some comments and in the documentation file.
- I have updated/replaced the ioctl function by unlocked_ioctl to avoid any warning from the Linux TSS trousers (tcsd) and according to the 2.6.35 --> 2.6.36 ioctl mechanism delta.
I have applied this patch to the last security-next kernel as you mentioned below (2.6.37 rc3) and run it on a beagleboard xM and C4
http://beagleboard.org/.
Those devices are already in the market.
I've tried to take care of all your feedbacks and to be familiar as good as I can
with all the Linux guidelines for all the patches submission process.
I'm using Outlook as mail client for company policy rules reasons.
I would like to know also what is the gap I have to reach to get this driver on the kernel source tree.
Any feedback or comments are welcome.
Thanks
Christophe
------------------------------
Signed-off-by: Christophe RICARD <christophe-h.ricard[at]st.com>
diff --git a/Documentation/tpm/tpm_stm_st19_i2c.txt b/Documentation/tpm/tpm_stm_st19_i2c.txt
--- a/Documentation/tpm/tpm_stm_st19_i2c.txt 1969-12-31 17:00:00.000000000 -0700
+++ b/Documentation/tpm/tpm_stm_st19_i2c.txt 2011-01-17 04:54:13.534658985 -0600
@@ -0,0 +1,169 @@
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST19NP18
+ * Copyright (C) 2009, 2010 STMicroelectronics
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@...com
+ */
+
+PURPOSE OF THE DOCUMENT
+------------------------
+This document describe the installation of the TPM driver for
+TPM ST19NP18 using I2C protocols.
+
+
+PLATFORM USED FOR TESTING
+--------------------------
+During the development, several embedded platforms running ARM CPU were
+used.
+Listing of validated platforms:
+- TI Beagleboard
+- STMicroelectronics Spear 300
+- STMicroelectronics Spear 600
+
+REQUIREMENTS
+-------------
+Software
+=========
+The TPM driver can be install under a kernel that implements at least the
+following features:
+- Linux GENERIC_GPIO programming interfaces.
+- I2C new style programming interface base (with probe & remove functions).
+- 1 I2C adapter (I2C Linux controller driver) or use of I2C_GPIO driver for I2C
+bitbanging.
+
+
+Hardware
+=========
+To run a TPM, the platform needs at least:
+- 2 Power supplies (3.3V).
+- 1 I2C controller or 2 GPIOs used for SDA & SCL (I2C bit bang method).
+- 2 GPIOs for signals accept_command & data_available.
+
+TPM I2C speed is 100Khz (Maximum)
+
+All TPM signals work at 3.3V
+
+HOW TO INSTALL
+---------------
+Platform installation file
+===========================
+(N.B: platform file in arch/<processor_type>/mach-<platform-name>/
+
+
+1 - Software integration
+=========================
+<processor_type> could be: alpha, arm, avr32, blackfin, cris, frv, h8300, ia64,
+m32r, m68k, m68knommu, parisc, powerpc, s390, sh, sparc, sparc64, um, x86,
+xtensa...
+<platform-name> corresponds to your platform
+
+In the file where the machine_init() function exists, the developer must
+declare:
+- 1 struct st19np18_platform_data to provide which gpio the driver will use.
+ * The accept_pin and data_avail_pin gpio are configured as input only.
+ * This gpio management is under the platform developer's responsability.
+
+Finally, in the machine_init() function provided in the same file, the developer
+should use the well known function i2c_register_board_info() from the I2C Linux
+API Core.
+
+2- Hardware integration
+========================
+- ST recommends connecting VPS1 and VPS2 to the board power supply and at least two
+GNDs (on each side of TSSOP28 package). (See datasheet for further information)
+
+- As the ST19NP18 has no internal pull up, ST recommands having:
+ * 2 external pull up on SDA & SCL signals (RpSDA/RpSCL) with values according
+to the abacus on page 40 or the "I2C Bus specification, version 2.1 January
+2000".
+
+
+Platform integration advises
+=============================
+
+For power management purposes, the kernel will send a TPM_SaveState command in the
+suspend tpm driver function.
+If the platform generates a TPM Init event on wakeup, the TPM_Startup(ST_STATE) command should
+be executed before the Linux kernel come up (resume function execution).
+
+Here is an example with beagleboard:
+====================================
+In the corresponding platform init file, the developer should specify
+the following information:
+- The platform gpio's used to managed the tpm's accept_pin/data_avail_pin
+(in a struct st19np18_platform_data declaration).
+- The TPM I2C 7 bits address (TPM_I2C_ST19_ADDR_WR) (in a struct i2c_board_info).
+
+Then the developer should add the TPM slave device to the good i2c adapter with the
+i2c_register_board_info function (assuming that the gpio and the i2c bus are well configured).
+
+Note: For the beagleboard configure your kernel with the following option: CONFIG_OMAP_MUX=y
+
+file arch\arm\mach-omap2\board-omap3beagle.c
+add the following:
+-----------------------------------------------------------------------
+
+static struct st19np18_platform_data tpm_data = {
+ .accept_pin = 135,
+ .data_avail_pin = 143,
+};
+
+static struct i2c_board_info __initdata tpm_st19_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO(TPM_DRIVER_NAME, TPM_I2C_ST19_ADDR_WR),
+ .platform_data = &tpm_data,
+ },
+};
+
+------------------------------------------------------------------------
+Then complete the beagleboard init to be like this:
+------------------------------------------------------------------------
+static void __init omap3_beagle_init(void)
+{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap3_beagle_i2c_init();
+ platform_add_devices(omap3_beagle_devices,
+ ARRAY_SIZE(omap3_beagle_devices));
+ omap_serial_init();
+
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+ gpio_request(170, "DVI_nPD");
+ /* REVISIT leave DVI powered down until it's needed ... */
+ gpio_direction_output(170, true);
+
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
+ omap3beagle_flash_init();
+
+ beagle_display_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(((struct st19np18_platform_data *)
+ tpm_st19_i2c_board_info[0].platform_data)->data_avail_pin,
+ OMAP_PIN_INPUT);
+ omap_mux_init_gpio(((struct st19np18_platform_data *)
+ tpm_st19_i2c_board_info[0].platform_data)->accept_pin,
+ OMAP_PIN_INPUT);
+
+ i2c_register_board_info(2, tpm_st19_i2c_board_info, ARRAY_SIZE(tpm_st19_i2c_board_info));
+}
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
--- a/drivers/char/tpm/Kconfig 2011-01-06 04:44:39.000000000 -0600
+++ b/drivers/char/tpm/Kconfig 2011-01-13 22:44:42.906408085 -0600
@@ -60,4 +60,13 @@
Further information on this driver and the supported hardware
can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
+config TCG_ST19_I2C
+ tristate "STMicroelectronics ST19 I2C TPM"
+ depends on I2C
+ depends on GPIOLIB
+ ---help---
+ If you have a TPM security chip from STMicroelectronics working with
+ an I2C bus, say Yes and it will be accessible from within Linux.
+ To compile this driver as a module, choose M here; the module will be
+ called tpm_stm_st19_i2c.
endif # TCG_TPM
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
--- a/drivers/char/tpm/Makefile 2011-01-06 04:44:39.000000000 -0600
+++ b/drivers/char/tpm/Makefile 2011-01-13 22:44:35.506658670 -0600
@@ -9,3 +9,4 @@
obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
+obj-$(CONFIG_TCG_ST19_I2C) += tpm_stm_st19_i2c.o
diff --git a/drivers/char/tpm/tpm_stm_st19_i2c.c b/drivers/char/tpm/tpm_stm_st19_i2c.c
--- a/drivers/char/tpm/tpm_stm_st19_i2c.c 1969-12-31 17:00:00.000000000 -0700
+++ b/drivers/char/tpm/tpm_stm_st19_i2c.c 2011-01-16 22:44:58.466479759 -0600
@@ -0,0 +1,602 @@
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST19NP18
+ * Copyright (C) 2009, 2010 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@...com
+ *
+ * @File: tpm_stm_st19_i2c.c
+ *
+ * @Synopsis:
+ * ----------------------------------------------------------------------
+ * 02/12/2008
+ * - Stand alone implementation (without any TPM api)
+ * ----------------------------------------------------------------------
+ * 03/02/2010
+ * - Power management (suspend and resume functions)
+ * implementation
+ * ----------------------------------------------------------------------
+ * 03/19/2010
+ * - Use of the linux kernel TPM api --> driver/char/tpm
+ * ----------------------------------------------------------------------
+ * 05/26/2010
+ * - Update code for code submission and bug fixes:
+ * - Comments spelling fixes
+ * - Lindent script execution
+ * - checkpatch.pl script execution
+ * - fix syslog error when loaded as a module:
+ * "release() function missing and must be fixed"
+ * - name files change from
+ * stm_st19_tpm_i2c to tpm_stm_st19_i2c
+ * ----------------------------------------------------------------------
+ * 06/15/2010
+ * - Update for new tpm core device.
+ * num_opens --> is_open
+ * ----------------------------------------------------------------------
+ * 07/08/2010
+ * - Update probe, resume suspend functions
+ * - Fix issue suspend buffer and work around related to the
+ * chip->data_buffer not allocated.
+ * ----------------------------------------------------------------------
+ * 09/03/2010
+ * - Review under LKLM
+ * - Patches from Joe Perches after review which fix some break and
+ * some neatings.
+ * ----------------------------------------------------------------------
+ * 09/16/2010
+ * - Remove unaccurate comment.
+ * ----------------------------------------------------------------------
+ * 01/12/2011
+ * - update ioctl function to unlocked_ioctl for kernel >= 2.6.36
+ * - Some cleaning
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/wait.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/smp_lock.h>
+
+#include <linux/i2c/tpm_stm_st19_i2c.h>
+
+#include "tpm.h"
+
+#include "tpm_stm_st19_i2c.h"
+
+#ifdef DEBUG
+#define FUNC_ENTER() pr_info("%s\n", __func__)
+#else
+#define FUNC_ENTER() do {} while (0)
+#endif
+
+static struct st19np18_platform_data *pin_infos;
+
+#define TPM_STS_DATA_AVAIL 0x10
+#define TPM_STS_ACCEPT_COMMAND 0x01
+#define TPM_STS_CANCEL (TPM_STS_DATA_AVAIL | TPM_STS_ACCEPT_COMMAND)
+enum tis_defaults {
+ TIS_SHORT_TIMEOUT = 750, /* ms */
+ TIS_LONG_TIMEOUT = 2000, /* 2 sec */
+};
+
+/*
+ * gpio_readpin is a wrapper to read a gpio value.
+ * Use generic gpio APIs
+ * @param: pin_id, the pin identifier where the value will be read.
+ * @return: the gpio value (should be 0 or 1) or negative errno
+ */
+static int gpio_readpin(int pin_id)
+{
+ int ret;
+ ret = gpio_direction_input(pin_id);
+ if (ret == 0)
+ return gpio_get_value(pin_id);
+ return ret;
+}
+
+/*
+ * tpm_stm_i2c_status is not implemented because TIS registers are not
+ * implemented.
+ */
+static u8 tpm_stm_i2c_status(struct tpm_chip *chip)
+{
+ u8 state_data, state_command;
+
+ state_data = gpio_readpin(pin_infos->data_avail_pin);
+ state_command = gpio_readpin(pin_infos->accept_pin);
+ return (state_data << 4) | state_command;
+}
+
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+ wait_queue_head_t *queue)
+{
+ unsigned long stop;
+ u8 status;
+
+ FUNC_ENTER();
+
+ /* check current status */
+ status = tpm_stm_i2c_status(chip);
+ if (status == mask)
+ return 0;
+ if (status == TPM_STS_CANCEL)
+ goto end;
+ stop = jiffies + timeout;
+ do {
+ msleep(TPM_TIMEOUT);
+ status = tpm_stm_i2c_status(chip);
+ if ((status & mask) == mask)
+ return 0;
+ } while (time_before(jiffies, stop));
+end:
+ return -ETIME;
+}
+
+/*
+ * tpm_stm_i2c_send send TPM commands through the I2C bus.
+ * Before sending any TPM commands, tpm_stm_i2c_send poll data_available and
+ * accept_command TPM GPIOs.
+ *
+ * In case the data_available is high (logical value 1), tpm_stm_i2c_send will
+ * empty the TPM FIFO by reading all the datas stored inside the TPM.
+ *
+ * Then, if the accept_command TPM GPIO is high(logical value 1)
+ * tpm_stm_i2c_send will first send the 10 bytes header of the TCG commands and
+ * then send the others bytes by 40 bytes blocks.
+ *
+ * data_available and accept_command TPM GPIOs will goes low when the TPM
+ * compute the command.
+ *
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
+ * @param: buf, the buffer to send.
+ * @param: count, the number of bytes to send.
+ * @return: In case of success the number of bytes sent.
+ * In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
+ size_t count)
+{
+ u32 ret = 0, i, size, ordinal;
+ struct i2c_client *client;
+
+ FUNC_ENTER();
+
+ if (chip == NULL)
+ return -EBUSY;
+ if (count < TPM_HEADER_SIZE)
+ return -EBUSY;
+ client = (struct i2c_client *)pin_infos->client;
+
+ ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+
+ size = TPM_HEADER_SIZE;
+ i = 0;
+ while (i < size && wait_for_stat(chip, TPM_STS_ACCEPT_COMMAND,
+ TPM_I2C_SHORT,
+ &chip->vendor.int_queue) == 0) {
+ int bytes;
+
+ if (i == 0)
+ bytes = TPM_HEADER_SIZE;
+ else
+ bytes = min_t(int, count - i, TPM_I2C_BLOCK_SIZE);
+
+ if (i == 0) {
+ size = be32_to_cpu(*(__be32 *) (buf + 2));
+ size = size < count ? size : count;
+ }
+ if (count < TPM_HEADER_SIZE)
+ bytes = count;
+ ret = i2c_master_send(client, buf + i, bytes);
+ if (ret < 0) {
+ pr_info("Failed to send data\n");
+ goto end;
+ }
+
+ if (i == 0)
+ i += TPM_HEADER_SIZE;
+ else
+ i += TPM_I2C_BLOCK_SIZE;
+ }
+
+ if (i == 0) {
+ pr_info("Failed to read gpio pin (AcceptCmd)\n");
+ ret = -EIO;
+ }
+end:
+ return ret ? ret : count;
+}
+
+/*
+ * tpm_stm_i2c_recv received TPM response through the I2C bus.
+ * Before receiving any TPM response, tpm_stm_i2c_recv poll data_available and
+ * accept_command TPM GPIOs.
+ *
+ * In case the accept_command is high (logical value 1), tpm_stm_i2c_recv will
+ * do nothing.
+ *
+ * Then, if the data_available TPM GPIO is high(logical value 1)
+ * tpm_stm_i2c_recv will first receive the 10 bytes header of the TCG TPM
+ * response and then receive the others bytes by 40 bytes blocks.
+ *
+ * accept_command TPM GPIOs will goes high when the TPM Fofo is empty.
+ *
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
+ * @param: buf, the buffer to store datas.
+ * @param: count, the number of bytes to send.
+ * @return: In case of success the number of bytes received.
+ * In other case, a < 0 value describing the issue.
+ */
+static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf,
+ size_t count)
+{
+ int ret = 0;
+ int i, size;
+ struct i2c_client *client;
+
+ FUNC_ENTER();
+
+ if (chip == NULL)
+ return -EBUSY;
+ if (count < TPM_HEADER_SIZE)
+ return -EBUSY;
+
+ client = (struct i2c_client *)pin_infos->client;
+
+ size = TPM_HEADER_SIZE;
+ i = 0;
+ while (i < size && wait_for_stat(chip, TPM_STS_DATA_AVAIL,
+ TPM_I2C_SHORT,
+ &chip->vendor.read_queue) == 0) {
+ int bytes;
+
+ if (count < TPM_HEADER_SIZE)
+ bytes = count;
+ else if (i == 0)
+ bytes = TPM_HEADER_SIZE;
+ else
+ bytes = min_t(int, size - i, TPM_I2C_BLOCK_SIZE);
+
+ ret = i2c_master_recv(client, buf + i, bytes);
+ if (ret < 0) {
+ pr_info(" Failed to read gpio pin (DataAvailable)\n");
+ goto end;
+ }
+
+ if (!buf) {
+ pr_info("read buffer is NULL\n");
+ goto end;
+ }
+
+ if (i == 0) {
+ size = be32_to_cpu(*(__be32 *) (buf + 2));
+ if (size > count)
+ size = count;
+ i += TPM_HEADER_SIZE;
+ } else
+ i += TPM_I2C_BLOCK_SIZE;
+ }
+
+ if (i == 0) {
+ pr_info("Failed to read gpio pin (DataAvailable)\n");
+ ret = -EIO;
+ goto end;
+ }
+ return size;
+end:
+ return ret;
+}
+
+/*
+ * tpm_stm_i2c_cancel, cancel is not implemented.
+ * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h.
+ */
+static void tpm_stm_i2c_cancel(struct tpm_chip *chip)
+{
+}
+
+/*
+ * tpm_st19_i2c_ioctl provides 2 handles:
+ * - TPMIOC_CANCEL: allow to CANCEL a TPM commands execution.
+ * See tpm_stm_i2c_cancel description above
+ * - TPMIOC_TRANSMIT: allow to transmit a TPM commands.
+ *
+ * @return: In case of success, return TPM response size.
+ * In other case return < 0 value describing the issue.
+ */
+/*#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 36)
+static ssize_t tpm_st19_i2c_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+#else*/
+static long tpm_st19_i2c_unlocked_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+/*#endif*/
+{
+ int in_size = 0, out_size = 0, ret = -ENOTTY;
+ struct tpm_chip *chip = file->private_data;
+
+ lock_kernel();
+ switch (cmd) {
+ case TPMIOC_CANCEL:
+ tpm_stm_i2c_cancel(chip);
+ ret = -ENOSYS;
+ break;
+ case TPMIOC_TRANSMIT:
+ if (copy_from_user(chip->data_buffer,
+ (const char *)arg, TPM_HEADER_SIZE)) {
+ ret = -EFAULT;
+ break;
+ }
+
+ in_size = be32_to_cpu(*(__be32 *) (chip->data_buffer + 2));
+ if (copy_from_user(chip->data_buffer,
+ (const char *)arg, in_size)) {
+ ret = -EFAULT;
+ break;
+ }
+
+ tpm_stm_i2c_send(chip, chip->data_buffer, in_size);
+
+ out_size = tpm_stm_i2c_recv(chip, chip->data_buffer,
+ TPM_BUFSIZE);
+ if (copy_to_user((char *)arg, chip->data_buffer, out_size)) {
+ ret = -EFAULT;
+ break;
+ }
+ ret = out_size;
+ break;
+ }
+ unlock_kernel();
+ return ret;
+}
+
+static const struct file_operations tpm_st19_i2c_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = tpm_read,
+
+ /*#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 36)
+ .ioctl = tpm_st19_i2c_ioctl,
+ #else */
+ .unlocked_ioctl = tpm_st19_i2c_unlocked_ioctl,
+ /*#endif */
+
+ .write = tpm_write,
+ .open = tpm_open,
+ .release = tpm_release,
+};
+
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
+static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
+static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
+static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute *stm_tpm_attrs[] = {
+ &dev_attr_pubek.attr,
+ &dev_attr_pcrs.attr,
+ &dev_attr_enabled.attr,
+ &dev_attr_active.attr,
+ &dev_attr_owned.attr,
+ &dev_attr_temp_deactivated.attr,
+ &dev_attr_caps.attr,
+ &dev_attr_cancel.attr, NULL,
+};
+
+static struct attribute_group stm_tpm_attr_grp = {
+ .attrs = stm_tpm_attrs
+};
+
+static struct tpm_vendor_specific st_i2c_tpm = {
+ .send = tpm_stm_i2c_send,
+ .recv = tpm_stm_i2c_recv,
+ .cancel = tpm_stm_i2c_cancel,
+ .status = tpm_stm_i2c_status,
+ .req_complete_mask = TPM_STS_DATA_AVAIL,
+ .req_complete_val = TPM_STS_DATA_AVAIL,
+ .req_canceled = TPM_STS_CANCEL,
+ .attr_group = &stm_tpm_attr_grp,
+ .miscdev = {.fops = &tpm_st19_i2c_fops,},
+};
+
+/*
+ * tpm_st19_i2c_probe initialize the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @param: id, the i2c_device_id struct.
+ * @return: 0 in case of success.
+ * -1 in other case.
+ */
+static int
+tpm_st19_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int err;
+ struct tpm_chip *chip;
+ struct st19np18_platform_data *platform_data;
+
+ FUNC_ENTER();
+
+ err = 0;
+
+ /* Check I2C platform functionnalities */
+ if (client == NULL) {
+ pr_info("client is NULL. exiting.\n");
+ err = -ENODEV;
+ goto end;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ pr_info("client not i2c capable\n");
+ err = -ENODEV;
+ goto end;
+ }
+
+ chip = tpm_register_hardware(&client->dev, &st_i2c_tpm);
+ if (!chip) {
+ err = -ENODEV;
+ goto end;
+ }
+
+ platform_data = client->dev.platform_data;
+ pin_infos = platform_data;
+ platform_data->client = client;
+ /* Default timeouts */
+ chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+ chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+ chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
+ /* Register GPIO pin through generic Linux GPIO API */
+ err = gpio_request(platform_data->accept_pin, "accept command");
+ if (err)
+ goto _gpio_init;
+
+ err = gpio_request(platform_data->data_avail_pin, "data available");
+ if (err)
+ goto _gpio_init;
+
+ tpm_get_timeouts(chip);
+ tpm_continue_selftest(chip);
+
+ /* attach chip datas to client */
+ i2c_set_clientdata(client, chip);
+
+ pr_info("TPM I2C Initialized\n");
+ return 0;
+_gpio_init:
+ if (platform_data) {
+ gpio_free(platform_data->accept_pin);
+ gpio_free(platform_data->data_avail_pin);
+ }
+ tpm_remove_hardware(chip->dev);
+end:
+ i2c_set_clientdata(client, NULL);
+ pr_info("TPM I2C initialisation fail\n");
+ return err;
+}
+
+/*
+ * tpm_st19_i2c_remove remove the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ clear_bit(0, &chip->is_open);
+ * @return: 0 in case of success.
+ */
+static __devexit int tpm_st19_i2c_remove(struct i2c_client *client)
+{
+ struct tpm_chip *chip = (struct tpm_chip *)i2c_get_clientdata(client);
+ FUNC_ENTER();
+
+ if (pin_infos != NULL) {
+ gpio_free(pin_infos->accept_pin);
+ gpio_free(pin_infos->data_avail_pin);
+ }
+
+ /* Check if chip has been previously clean */
+ if (chip != NULL)
+ tpm_remove_hardware(chip->dev);
+
+ return 0;
+}
+
+/*
+ * tpm_st19_i2c_pm_suspend suspend the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @param: mesg, the power management message.
+ * @return: 0 in case of success.
+ */
+static int tpm_st19_i2c_pm_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ return tpm_pm_suspend(&client->dev, mesg);
+}
+
+/*
+ * tpm_st19_i2c_pm_resume resume the TPM device
+ * @param: client, the i2c_client drescription (TPM I2C description).
+ * @return: 0 in case of success.
+ */
+static int tpm_st19_i2c_pm_resume(struct i2c_client *client)
+{
+ return tpm_pm_resume(&client->dev);
+} /* tpm_st19_i2c_pm_resume() */
+
+static const struct i2c_device_id tpm_st19_i2c_id[] = {
+ {TPM_DRIVER_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, tpm_st19_i2c_id);
+
+static struct i2c_driver tpm_st19_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = TPM_DRIVER_NAME,
+ },
+ .probe = tpm_st19_i2c_probe,
+ .remove = tpm_st19_i2c_remove,
+ .resume = tpm_st19_i2c_pm_resume,
+ .suspend = tpm_st19_i2c_pm_suspend,
+ .id_table = tpm_st19_i2c_id
+};
+
+/*
+ * tpm_st19_i2c_init initialize driver
+ * @return: 0 if successful, else non zero value.
+ */
+static int __init tpm_st19_i2c_init(void)
+{
+ FUNC_ENTER();
+ return i2c_add_driver(&tpm_st19_i2c_driver);
+}
+
+/*
+ * tpm_st19_i2c_exit The kernel calls this function during unloading the
+ * module or during shut down process
+ */
+static void __exit tpm_st19_i2c_exit(void)
+{
+ FUNC_ENTER();
+ i2c_del_driver(&tpm_st19_i2c_driver);
+}
+
+module_init(tpm_st19_i2c_init);
+module_exit(tpm_st19_i2c_exit);
+
+MODULE_AUTHOR("Christophe Ricard (tpmsupport@...com)");
+MODULE_DESCRIPTION("STM TPM I2C ST19 Driver");
+MODULE_VERSION("1.2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_stm_st19_i2c.h b/drivers/char/tpm/tpm_stm_st19_i2c.h
--- a/drivers/char/tpm/tpm_stm_st19_i2c.h 1969-12-31 17:00:00.000000000 -0700
+++ b/drivers/char/tpm/tpm_stm_st19_i2c.h 2011-01-16 22:45:08.918407969 -0600
@@ -0,0 +1,52 @@
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST19NP18
+ * Copyright (C) 2009, 2010 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @Author: Christophe RICARD tpmsupport@...com
+ *
+ * @File: stm_st19_tpm_i2c.h
+ *
+ * @Date: 02/12/2008
+ */
+#ifndef __STM_ST19_TPM_I2C_MAIN_H__
+#define __STM_ST19_TPM_I2C_MAIN_H__
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+
+#define TPM_BUFSIZE 2048
+#define TPM_HEADER_SIZE 10
+#define TPM_I2C_BLOCK_SIZE 0x28
+
+#define TPM_I2C_SHORT 2000 /* 2s */
+#define STARTUP_WAIT_INTERVAL 8 /* 8ms */
+
+/* ioctl commands */
+#define TPMIOC_CANCEL _IO('T', 0x00) /* Not supported */
+#define TPMIOC_TRANSMIT _IO('T', 0x01)
+
+#endif /* __STM_ST19_TPM_I2C_MAIN_H__ */
diff --git a/include/linux/i2c/tpm_stm_st19_i2c.h b/include/linux/i2c/tpm_stm_st19_i2c.h
--- a/include/linux/i2c/tpm_stm_st19_i2c.h 1969-12-31 17:00:00.000000000 -0700
+++ b/include/linux/i2c/tpm_stm_st19_i2c.h 2011-01-16 22:45:31.758408188 -0600
@@ -0,0 +1,42 @@
+/*
+ * STMicroelectronics TPM I2C Linux driver for TPM ST19NP18
+ * Copyright (C) 2009, 2010 STMicroelectronics
+ * Christophe RICARD tpmsupport@...com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * STMicroelectronics version 1.2.0, Copyright (C) 2010
+ * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
+ * This is free software, and you are welcome to redistribute it
+ * under certain conditions.
+ *
+ * @File: stm_st19_tpm_i2c.h
+ *
+ * @Date: 06/15/2008
+ */
+#ifndef __STM_ST19_TPM_I2C_H__
+#define __STM_ST19_TPM_I2C_H__
+
+#include <linux/i2c.h>
+
+#define TPM_DRIVER_NAME "st19np18"
+#define TPM_I2C_ST19_ADDR_WR (0x26 >> 1) /*0x13 7 bits address */
+
+struct st19np18_platform_data {
+ int accept_pin; /* accept command pin */
+ int data_avail_pin;/* data available pin */
+ struct i2c_client *client;
+};
+
+#endif /* __STM_ST19_TPM_I2C_H__ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists