| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Feb 2011 17:17:28 +0100
From: "Mario 'BitKoenig' Holbe" <Mario.Holbe@...Ilmenau.DE>
To: linux-kernel@...r.kernel.org
Subject: kernel BUG and freeze on cat /proc/tty/driver/serial
Hello,
reading /proc/tty/driver/serial leads to a NULL pointer dereference BUG
and freeze on a serial-console enabled 2.6.35.{4,10,11} and 2.6.37.
2.6.32.28 does fine without BUG and freeze.
Fresh boot 2.6.35.11 into emergency...
# cat /proc/tty/driver/serial
[ 73.199568] BUG: unable to handle kernel NULL pointer dereference at 00000099
[ 73.227373] IP: [<c11a8969>] tty_ldisc_try+0x10/0x35
[ 73.227373] *pdpt = 0000000036da6001 *pde = 0000000000000000
[ 73.227373] Oops: 0000 [#1] SMP
[ 73.227373] last sysfs file: /sys/devices/virtual/block/md1/md/level
[ 73.227373] Modules linked in: ext2 mbcache aes_i586 aes_generic xts gf128mul dm_crypt raid1 md_mod dm_mirror dm_region_hash dm_log btrfs zlib_deflate crc32c libcrc32c dm_mod usbhid hid sg sr_mod sd_mod cdrom crc_t10dif ata_generic uhci_hcd ahci ehci_hcd pata_jmicron libahci firewire_ohci sata_sil24 libata firewire_core crc_itu_t floppy usbcore thermal scsi_mod atl1 thermal_sys mii nls_base [last unloaded: scsi_wait_scan]
[ 73.227373]
[ 73.227373] Pid: 857, comm: cat Not tainted 2.6.35.11 #1 P5E-V HDMI/P5E-V HDMI
[ 73.227373] EIP: 0060:[<c11a8969>] EFLAGS: 00010046 CPU: 3
[ 73.227373] EIP is at tty_ldisc_try+0x10/0x35
[ 73.227373] EAX: 00000002 EBX: 00000000 ECX: c156779c EDX: 000003fe
[ 73.227373] ESI: 00000000 EDI: f6c40000 EBP: 0000009b ESP: f6f39e9c
[ 73.227373] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 73.227373] Process cat (pid: 857, ti=f6f38000 task=f6a05280 task.ti=f6f38000)
[ 73.227373] Stack:
[ 73.227373] c1569a08 f6ccc000 c11c4d9d c1569a08 00000080 f6ccc000 c139d488 c1569a08
[ 73.227373] <0> f6ccc000 f6c40000 f6f39eec c11c4f76 c11c2b36 00000000 000003f8 c139d482
[ 73.227373] <0> 00000000 00000000 f6c40040 c142fae4 0804e3f0 fff77270 c5b3a560 c143a444
[ 73.227373] Call Trace:
[ 73.227373] [<c11c4d9d>] ? check_modem_status+0x7d/0x170
[ 73.227373] [<c11c4f76>] ? serial8250_get_mctrl+0x5/0x35
[ 73.227373] [<c11c2b36>] ? uart_proc_show+0x134/0x2ea
[ 73.227373] [<c10d077c>] ? seq_read+0x176/0x336
[ 73.227373] [<c10a460f>] ? handle_mm_fault+0xbd5/0xc06
[ 73.227373] [<c10d0606>] ? seq_read+0x0/0x336
[ 73.227373] [<c10efc4d>] ? proc_reg_read+0x55/0x68
[ 73.227373] [<c10efbf8>] ? proc_reg_read+0x0/0x68
[ 73.227373] [<c10bd133>] ? vfs_read+0x7c/0xd7
[ 73.227373] [<c128c475>] ? do_page_fault+0x26d/0x2cf
[ 73.227373] [<c10bd221>] ? sys_read+0x3c/0x60
[ 73.227373] [<c1007d5f>] ? sysenter_do_call+0x12/0x28
[ 73.227373] Code: 00 eb ea ff 47 4c 89 fb 89 ea b8 9c 77 56 c1 e8 7c 0e 0e 00 89 d8 5b 5e 5f 5d c3 56 89 c6 53 b8 9c 77 56 c1 e8 21 0e 0e 00 31 db <f6> 86 99 00 00 00 02 74 0b 8b 5e 28 85 db 74 04 f0 ff 43 04 89
[ 73.227373] EIP: [<c11a8969>] tty_ldisc_try+0x10/0x35 SS:ESP 0068:f6f39e9c
[ 73.227373] CR2: 0000000000000099
[ 73.227373] ---[ end trace d434316c12adce41 ]---
2.6.37 doesn't print a full trace before freezing but only the first two
lines or less.
Either disabling the serial console or running setserial -g on the
serial console port avoids the BUG and the freeze:
Fresh boot 2.6.35.11 into emergency...
# setserial -g /dev/ttyS0
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
# cat /proc/tty/driver/serial
serinfo:1.0 driver revision:
0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 CTS|DTR|CD
1: uart:unknown port:000002F8 irq:3
2: uart:unknown port:000003E8 irq:4
3: uart:unknown port:000002E8 irq:3
4: uart:16550A port:0000EC00 irq:17 tx:0 rx:0
5: uart:16550A port:0000E880 irq:17 tx:0 rx:0 CTS|CD
6: uart:16550A port:0000E800 irq:17 tx:0 rx:0
7: uart:16550A port:0000E480 irq:17 tx:0 rx:0
8: uart:16550A port:0000E400 irq:17 tx:0 rx:0
9: uart:16550A port:0000E080 irq:17 tx:0 rx:0
#
serial and console related kernel boot messages:
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35.11 root=/dev/mapper/md1 ro console=ttyS0,38400n8r console=tty0 enable_mtrr_cleanup raid=noautodetect parport=0x378,7,3 8250.nr_uarts=10 panic=60 emergency
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 3.391406] vesafb: framebuffer at 0xd0000000, mapped to 0xf8280000, using 3072k, total 3072k
[ 3.416943] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.435193] vesafb: scrolling: redraw
[ 3.446167] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.482257] Console: switching to colour frame buffer device 128x48
[ 3.520338] fb0: VESA VGA frame buffer device
[ 3.955642] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[ 3.974981] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.993496] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.010472] serial 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.031637] 0000:05:01.0: ttyS4 at I/O 0xec00 (irq = 17) is a 16550A
[ 4.050966] 0000:05:01.0: ttyS5 at I/O 0xe880 (irq = 17) is a 16550A
[ 4.070282] 0000:05:01.0: ttyS6 at I/O 0xe800 (irq = 17) is a 16550A
[ 4.089608] 0000:05:01.0: ttyS7 at I/O 0xe480 (irq = 17) is a 16550A
[ 4.108940] 0000:05:01.0: ttyS8 at I/O 0xe400 (irq = 17) is a 16550A
[ 4.128258] 0000:05:01.0: ttyS9 at I/O 0xe080 (irq = 17) is a 16550A
regards
Mario
--
Computer games don't affect kids; I mean if Pac-Man affected us as kids,
we'd all be running around in darkened rooms, munching magic pills and
listening to repetitive electronic music.
-- Kristian Wilson, Nintendo Inc, 1989
Download attachment "signature.asc" of type "application/pgp-signature" (483 bytes)
Powered by blists - more mailing lists