| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 22 Feb 2011 13:04:55 -0800
From: rklein <rklein@...dia.com>
To: Anton Vorontsov <cbouatmailru@...il.com>
Cc: "olof@...om.net" <olof@...om.net>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] power: bq20z75: change to platform driver
On Mon, 2011-02-14 at 11:25 -0800, Rhyland Klein wrote:
> From: Rhyland Klein <rklein@...dia.com>
>
> This change switches the bq20z75 i2c driver into a platform driver
> and adds support for an optional battery detect gpio. Now the driver also
> signals when the battery is inserted or removed.
>
> I also added a retry mechanism so that for boards where there may be
> intermittent i2c issues, retries can be used to avoid spurious failures.
>
> Signed-off-by: Rhyland Klein <rklein@...dia.com>
> ---
> drivers/power/bq20z75.c | 282 ++++++++++++++++++++++++++++++++---------
> include/linux/power/bq20z75.h | 39 ++++++
> 2 files changed, 258 insertions(+), 63 deletions(-)
> create mode 100644 include/linux/power/bq20z75.h
>
> diff --git a/drivers/power/bq20z75.c b/drivers/power/bq20z75.c
> index 4141775..9b9269e 100644
> --- a/drivers/power/bq20z75.c
> +++ b/drivers/power/bq20z75.c
> @@ -25,6 +25,11 @@
> #include <linux/power_supply.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +
> +#include <linux/power/bq20z75.h>
>
> enum {
> REG_MANUFACTURER_DATA,
> @@ -141,17 +146,30 @@ static enum power_supply_property bq20z75_properties[] = {
> };
>
> struct bq20z75_info {
> - struct i2c_client *client;
> - struct power_supply power_supply;
> + struct i2c_client *client;
> + struct i2c_adapter *adapter;
> + struct power_supply power_supply;
> + bool is_present;
> + struct bq20z75_platform_data *pdata;
> + struct platform_device *pdev;
> + bool gpio_detect;
> + int irq;
> + bool enable_detection;
> };
>
> static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
> {
> - s32 ret;
> + s32 ret = 0;
> + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
> + int retries = max(bq20z75_device->pdata->i2c_retry_count+1, 1);
>
> - ret = i2c_smbus_read_word_data(client, address);
> + while (retries > 0) {
> + ret = i2c_smbus_read_word_data(client, address);
> + if (ret >= 0)
> + break;
> + }
> if (ret < 0) {
> - dev_err(&client->dev,
> + dev_warn(&bq20z75_device->pdev->dev,
> "%s: i2c read at address 0x%x failed\n",
> __func__, address);
> return ret;
> @@ -162,15 +180,24 @@ static int bq20z75_read_word_data(struct i2c_client *client, u8 address)
> static int bq20z75_write_word_data(struct i2c_client *client, u8 address,
> u16 value)
> {
> - s32 ret;
> -
> - ret = i2c_smbus_write_word_data(client, address, le16_to_cpu(value));
> + s32 ret = 0;
> + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
> + int retries = max(bq20z75_device->pdata->i2c_retry_count+1, 1);
> +
> + while (retries > 0) {
> + ret = i2c_smbus_write_word_data(client, address,
> + le16_to_cpu(value));
> + if (ret >= 0)
> + break;
> + retries--;
> + }
> if (ret < 0) {
> - dev_err(&client->dev,
> + dev_warn(&bq20z75_device->pdev->dev,
> "%s: i2c write to address 0x%x failed\n",
> __func__, address);
> return ret;
> }
> +
> return 0;
> }
>
> @@ -179,7 +206,15 @@ static int bq20z75_get_battery_presence_and_health(
> union power_supply_propval *val)
> {
> s32 ret;
> + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
>
> + if (psp == POWER_SUPPLY_PROP_PRESENT &&
> + bq20z75_device->gpio_detect) {
> + ret = gpio_get_value(
> + bq20z75_device->pdata->battery_detect);
> + val->intval = (ret == 0 ? 1 : 0);
> + return ret;
> + }
> /* Write to ManufacturerAccess with
> * ManufacturerAccess command and then
> * read the status */
> @@ -189,12 +224,15 @@ static int bq20z75_get_battery_presence_and_health(
> if (ret < 0)
> return ret;
>
> -
> ret = bq20z75_read_word_data(client,
> bq20z75_data[REG_MANUFACTURER_DATA].addr);
> - if (ret < 0)
> + if (ret < 0) {
> + if (psp == POWER_SUPPLY_PROP_PRESENT)
> + val->intval = 0; /* battery removed */
> return ret;
>
> + }
> +
> if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value ||
> ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) {
> val->intval = 0;
> @@ -271,6 +309,8 @@ static void bq20z75_unit_adjustment(struct i2c_client *client,
> #define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION)
> #define TIME_UNIT_CONVERSION 600
> #define TEMP_KELVIN_TO_CELCIUS 2731
> + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
> +
> switch (psp) {
> case POWER_SUPPLY_PROP_ENERGY_NOW:
> case POWER_SUPPLY_PROP_ENERGY_FULL:
> @@ -300,7 +340,7 @@ static void bq20z75_unit_adjustment(struct i2c_client *client,
> break;
>
> default:
> - dev_dbg(&client->dev,
> + dev_dbg(&bq20z75_device->pdev->dev,
> "%s: no need for unit conversion %d\n", __func__, psp);
> }
> }
> @@ -348,11 +388,11 @@ static int bq20z75_get_battery_capacity(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> - if (psp == POWER_SUPPLY_PROP_CAPACITY) {
> - /* bq20z75 spec says that this can be >100 %
> - * even if max value is 100 % */
> + /* bq20z75 spec says that this can be >100 %
> + * even if max value is 100 % */
> + if (psp == POWER_SUPPLY_PROP_CAPACITY)
> val->intval = min(ret, 100);
> - } else
> + else
> val->intval = ret;
>
> ret = bq20z75_set_battery_mode(client, mode);
> @@ -383,11 +423,13 @@ static int bq20z75_get_property_index(struct i2c_client *client,
> enum power_supply_property psp)
> {
> int count;
> + struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
> +
> for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++)
> if (psp == bq20z75_data[count].psp)
> return count;
>
> - dev_warn(&client->dev,
> + dev_warn(&bq20z75_device->pdev->dev,
> "%s: Invalid Property - %d\n", __func__, psp);
>
> return -EINVAL;
> @@ -398,7 +440,7 @@ static int bq20z75_get_property(struct power_supply *psy,
> union power_supply_propval *val)
> {
> int ps_index;
> - int ret;
> + int ret = 0;
> struct bq20z75_info *bq20z75_device = container_of(psy,
> struct bq20z75_info, power_supply);
> struct i2c_client *client = bq20z75_device->client;
> @@ -407,8 +449,6 @@ static int bq20z75_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_PRESENT:
> case POWER_SUPPLY_PROP_HEALTH:
> ret = bq20z75_get_battery_presence_and_health(client, psp, val);
> - if (ret)
> - return ret;
> break;
>
> case POWER_SUPPLY_PROP_TECHNOLOGY:
> @@ -423,19 +463,16 @@ static int bq20z75_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> case POWER_SUPPLY_PROP_CAPACITY:
> ps_index = bq20z75_get_property_index(client, psp);
> - if (ps_index < 0)
> - return ps_index;
> + if (ps_index < 0) {
> + ret = ps_index;
> + break;
> + }
>
> ret = bq20z75_get_battery_capacity(client, ps_index, psp, val);
> - if (ret)
> - return ret;
> -
> break;
>
> case POWER_SUPPLY_PROP_SERIAL_NUMBER:
> ret = bq20z75_get_battery_serial_number(client, val);
> - if (ret)
> - return ret;
> break;
>
> case POWER_SUPPLY_PROP_STATUS:
> @@ -447,41 +484,76 @@ static int bq20z75_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
> case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> ps_index = bq20z75_get_property_index(client, psp);
> - if (ps_index < 0)
> - return ps_index;
> + if (ps_index < 0) {
> + ret = ps_index;
> + break;
> + }
>
> ret = bq20z75_get_battery_property(client, ps_index, psp, val);
> - if (ret)
> - return ret;
> -
> break;
>
> default:
> - dev_err(&client->dev,
> + dev_err(&bq20z75_device->pdev->dev,
> "%s: INVALID property\n", __func__);
> return -EINVAL;
> }
>
> - /* Convert units to match requirements for power supply class */
> - bq20z75_unit_adjustment(client, psp, val);
> + if (!bq20z75_device->enable_detection)
> + goto done;
> +
> + if (!bq20z75_device->gpio_detect &&
> + bq20z75_device->is_present != (ret >= 0)) {
> + bq20z75_device->is_present = (ret >= 0);
> + power_supply_changed(&bq20z75_device->power_supply);
> + }
>
> - dev_dbg(&client->dev,
> +done:
> + if (!ret) {
> + /* Convert units to match requirements for power supply class */
> + bq20z75_unit_adjustment(client, psp, val);
> + }
> +
> + dev_dbg(&bq20z75_device->pdev->dev,
> "%s: property = %d, value = %d\n", __func__, psp, val->intval);
>
> - return 0;
> + return ret;
> }
>
> -static int bq20z75_probe(struct i2c_client *client,
> - const struct i2c_device_id *id)
> +static irqreturn_t bq20z75_irq(int irq, void *devid)
> +{
> + struct power_supply *battery = devid;
> +
> + power_supply_changed(battery);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static struct i2c_board_info __initdata bq20z75_i2c_device = {
> + I2C_BOARD_INFO("bq20z75", 0x0b),
> +};
> +
> +static int __devinit bq20z75_probe(struct platform_device *pdev)
> {
> struct bq20z75_info *bq20z75_device;
> int rc;
> + struct bq20z75_platform_data *pdata = pdev->dev.platform_data;
> + int irq;
> + struct i2c_adapter *adapter;
> + struct i2c_client *client;
> +
> + if (!pdata) {
> + dev_err(&pdev->dev, "No platform data\n");
> + return -EINVAL;
> + }
>
> bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL);
> if (!bq20z75_device)
> return -ENOMEM;
>
> - bq20z75_device->client = client;
> + bq20z75_device->gpio_detect = gpio_is_valid(pdata->battery_detect);
> + bq20z75_device->pdata = pdata;
> + bq20z75_device->enable_detection = false;
> + bq20z75_device->pdev = pdev;
> bq20z75_device->power_supply.name = "battery";
> bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
> bq20z75_device->power_supply.properties = bq20z75_properties;
> @@ -489,27 +561,116 @@ static int bq20z75_probe(struct i2c_client *client,
> ARRAY_SIZE(bq20z75_properties);
> bq20z75_device->power_supply.get_property = bq20z75_get_property;
>
> + platform_set_drvdata(pdev, &bq20z75_device);
> +
> + if (!bq20z75_device->gpio_detect)
> + goto skip_gpio;
> +
> + rc = gpio_request(pdata->battery_detect, dev_name(&pdev->dev));
> + if (rc) {
> + dev_warn(&pdev->dev, "Failed to request gpio: %d\n", rc);
> + bq20z75_device->gpio_detect = false;
> + goto skip_gpio;
> + }
> +
> + rc = gpio_direction_input(pdata->battery_detect);
> + if (rc) {
> + dev_warn(&pdev->dev, "Failed to get gpio as input: %d\n", rc);
> + gpio_free(pdata->battery_detect);
> + bq20z75_device->gpio_detect = false;
> + goto skip_gpio;
> + }
> +
> + irq = gpio_to_irq(pdata->battery_detect);
> + if (irq <= 0) {
> + gpio_free(pdata->battery_detect);
> + bq20z75_device->gpio_detect = false;
> + goto skip_gpio;
> + }
> +
> + rc = request_irq(irq, bq20z75_irq,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> + dev_name(&pdev->dev), &bq20z75_device->power_supply);
> + if (rc) {
> + dev_warn(&pdev->dev, "Failed to request irq: %d\n", rc);
> + gpio_free(pdata->battery_detect);
> + bq20z75_device->gpio_detect = false;
> + }
> +
> + bq20z75_device->irq = irq;
> +
> +skip_gpio:
> + adapter = i2c_get_adapter(pdata->bus);
> + if (!adapter) {
> + dev_err(&pdev->dev, "Failed to get I2C adapter\n");
> + rc = -EINVAL;
> + goto exit_adapter;
> + }
> +
> + client = i2c_new_device(adapter, &bq20z75_i2c_device);
> + if (!client) {
> + dev_err(&pdev->dev, "Failed to create I2C device\n");
> + rc = -EINVAL;
> + goto exit_device;
> + }
> +
> + bq20z75_device->adapter = adapter;
> + bq20z75_device->client = client;
> i2c_set_clientdata(client, bq20z75_device);
>
> - rc = power_supply_register(&client->dev, &bq20z75_device->power_supply);
> + rc = power_supply_register(&pdev->dev, &bq20z75_device->power_supply);
> if (rc) {
> - dev_err(&client->dev,
> + dev_err(&pdev->dev,
> "%s: Failed to register power supply\n", __func__);
> - kfree(bq20z75_device);
> - return rc;
> + goto exit_psupply;
> }
>
> - dev_info(&client->dev,
> + /* NOW check if initially present */
> + if (bq20z75_device->gpio_detect) {
> + int present = gpio_get_value(pdata->battery_detect);
> + bq20z75_device->is_present = (present == 0);
> + } else {
> + union power_supply_propval val;
> + bq20z75_get_battery_presence_and_health(client,
> + POWER_SUPPLY_PROP_PRESENT, &val);
> + bq20z75_device->is_present = (val.intval != 0);
> + }
> + bq20z75_device->enable_detection = true;
> +
> + dev_info(&pdev->dev,
> "%s: battery gas gauge device registered\n", client->name);
>
> return 0;
> +exit_psupply:
> + i2c_unregister_device(client);
> +exit_device:
> + i2c_put_adapter(adapter);
> +exit_adapter:
> + if (bq20z75_device->irq)
> + free_irq(bq20z75_device->irq, &bq20z75_device->power_supply);
> + if (bq20z75_device->gpio_detect)
> + gpio_free(pdata->battery_detect);
> +
> + kfree(bq20z75_device);
> + return rc;
> }
>
> -static int bq20z75_remove(struct i2c_client *client)
> +static int __devexit bq20z75_remove(struct platform_device *pdev)
> {
> - struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
> + struct bq20z75_info *bq20z75_device = platform_get_drvdata(pdev);
>
> power_supply_unregister(&bq20z75_device->power_supply);
> +
> + if (bq20z75_device->irq)
> + free_irq(bq20z75_device->irq, &bq20z75_device->power_supply);
> +
> + if (bq20z75_device->gpio_detect)
> + gpio_free(bq20z75_device->pdata->battery_detect);
> +
> + i2c_unregister_device(bq20z75_device->client);
> + i2c_put_adapter(bq20z75_device->adapter);
> +
> + platform_set_drvdata(pdev, NULL);
> kfree(bq20z75_device);
> bq20z75_device = NULL;
>
> @@ -517,13 +678,14 @@ static int bq20z75_remove(struct i2c_client *client)
> }
>
> #if defined CONFIG_PM
> -static int bq20z75_suspend(struct i2c_client *client,
> +static int bq20z75_suspend(struct platform_device *pdev,
> pm_message_t state)
> {
> + struct bq20z75_info *bq20z75_device = platform_get_drvdata(pdev);
> s32 ret;
>
> /* write to manufacturer access with sleep command */
> - ret = bq20z75_write_word_data(client,
> + ret = bq20z75_write_word_data(bq20z75_device->client,
> bq20z75_data[REG_MANUFACTURER_DATA].addr,
> MANUFACTURER_ACCESS_SLEEP);
> if (ret < 0)
> @@ -537,33 +699,27 @@ static int bq20z75_suspend(struct i2c_client *client,
> /* any smbus transaction will wake up bq20z75 */
> #define bq20z75_resume NULL
>
> -static const struct i2c_device_id bq20z75_id[] = {
> - { "bq20z75", 0 },
> - {}
> -};
> -
> -static struct i2c_driver bq20z75_battery_driver = {
> +static struct platform_driver bq20z75_driver = {
> .probe = bq20z75_probe,
> - .remove = bq20z75_remove,
> + .remove = __devexit_p(bq20z75_remove),
> .suspend = bq20z75_suspend,
> .resume = bq20z75_resume,
> - .id_table = bq20z75_id,
> .driver = {
> .name = "bq20z75-battery",
> },
> };
>
> -static int __init bq20z75_battery_init(void)
> +static int __init bq20z75_init(void)
> {
> - return i2c_add_driver(&bq20z75_battery_driver);
> + return platform_driver_register(&bq20z75_driver);
> }
> -module_init(bq20z75_battery_init);
> +module_init(bq20z75_init);
>
> -static void __exit bq20z75_battery_exit(void)
> +static void __exit bq20z75_exit(void)
> {
> - i2c_del_driver(&bq20z75_battery_driver);
> + platform_driver_unregister(&bq20z75_driver);
> }
> -module_exit(bq20z75_battery_exit);
> +module_exit(bq20z75_exit);
>
> MODULE_DESCRIPTION("BQ20z75 battery monitor driver");
> MODULE_LICENSE("GPL");
> diff --git a/include/linux/power/bq20z75.h b/include/linux/power/bq20z75.h
> new file mode 100644
> index 0000000..53529f0
> --- /dev/null
> +++ b/include/linux/power/bq20z75.h
> @@ -0,0 +1,39 @@
> +/*
> + * Gas Gauge driver for TI's BQ20Z75
> + *
> + * Copyright (c) 2010, NVIDIA Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> + */
> +
> +#ifndef __LINUX_POWER_BQ20Z75_H_
> +#define __LINUX_POWER_BQ20Z75_H_
> +
> +#include <linux/power_supply.h>
> +#include <linux/types.h>
> +
> +/**
> + * struct bq20z75_platform_data - platform data for bq20z75 devices
> + * @battery_detect: GPIO which is used to detect battery presence
> + * @i2c_retry_count: # of times to retry on i2c io failure
> + * @bus: i2c bus number
> + */
> +struct bq20z75_platform_data {
> + int battery_detect;
> + int i2c_retry_count;
> + int bus;
> +};
> +
> +#endif
> --
> 1.7.0.4
>
Anton, have you had a chance to look at this patch yet?
-rhyland
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists