| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 3 Mar 2011 19:25:20 -0800
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Madhu Iyengar <madhu.iyengar@...gic.com>,
Andrew Vasquez <andrew.vasquez@...gic.com>
Cc: James Bottomley <James.Bottomley@...senPartnership.com>,
Christoph Hellwig <hch@....de>,
Mike Christie <michaelc@...wisc.edu>,
Hannes Reinecke <hare@...e.de>, Ruediger Oertel <ro@...e.de>,
Nicholas Bellinger <nab@...ingtidesystems.com>
Subject: [RFC-v2 2/3] qla2xxx: Enable 2xxx series LLD target mode support
From: Nicholas Bellinger <nab@...ingtidesystems.com>
This patch enables target mode support with the qla2xxx SCSI LLD using
qla_target.c logic introduced in commit 703194ae2. This includes:
*) Addition of target mode specific members to existing data
structures in qla_def.h and struct qla_hw_data->qla2x_tmpl using
qla_tgt_def.h:struct qla_target_template.
*) Addition of qla_hw_data->qla2x_tmpl checks for API calls via
struct qla_target_template and/or direct calls into qla_target.c
logic w/ qla_tgt_* prefixed functions.
*) Addition of qla24xx_process_atio_queue(), qla2x00_req_pkt()
for ring processing, and qla2x00_issue_marker() for handling
request/response queue processing for target mode.
*) Addition of various qla_tgt_mode_enabled() logic checks in
qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(),
qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp().
For the specific checks for qla_hw_data->qla2x_tmpl this includes:
*) control plane:
qla_init.c:qla2x00_rport_del() -> qla_tgt_fc_port_deleted()
qla_init.c:qla2x00_reg_remote_port() -> qla_tgt_fc_port_added()
qla_init.c:qla2x00_device_resync() -> qla2x00_mark_device_lost()
*) I/O path:
qla_isr.c:qla2x00_async_event() -> qla_tgt_async_event()
qla_isr.c:qla2x00_process_response_queue() -> qla_tgt_response_pkt_all_vps()
qla_isr.c:qla24xx_process_response_queue() -> qla_tgt_response_pkt_all_vps()
Signed-off-by: Nicholas A. Bellinger <nab@...ingtidesystems.com>
---
drivers/scsi/qla2xxx/Makefile | 4 +-
drivers/scsi/qla2xxx/qla_attr.c | 13 ++-
drivers/scsi/qla2xxx/qla_dbg.h | 34 ++++++
drivers/scsi/qla2xxx/qla_def.h | 68 ++++++++++-
drivers/scsi/qla2xxx/qla_fw.h | 10 ++
drivers/scsi/qla2xxx/qla_gbl.h | 11 ++
drivers/scsi/qla2xxx/qla_gs.c | 13 ++-
drivers/scsi/qla2xxx/qla_init.c | 249 +++++++++++++++++++++++++++++++++++++--
drivers/scsi/qla2xxx/qla_iocb.c | 106 ++++++++++++++++-
drivers/scsi/qla2xxx/qla_isr.c | 229 ++++++++++++++++++++++++++++++++++--
drivers/scsi/qla2xxx/qla_mbx.c | 173 +++++++++++++++++++++++++--
drivers/scsi/qla2xxx/qla_mid.c | 34 +++++-
drivers/scsi/qla2xxx/qla_os.c | 168 ++++++++++++++++++++++++---
13 files changed, 1054 insertions(+), 58 deletions(-)
diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile
index 5df782f..4861054 100644
--- a/drivers/scsi/qla2xxx/Makefile
+++ b/drivers/scsi/qla2xxx/Makefile
@@ -1,5 +1,7 @@
qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o \
- qla_nx.o
+ qla_nx.o qla_target.o
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
+
+EXTRA_CFLAGS := -Idrivers/scsi/qla2xxx/ -Idrivers/target/ -Idrivers/target/tcm_qla2xxx/
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index d3e58d7..aaeee53 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -5,6 +5,7 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
+#include "qla_target.h"
#include <linux/kthread.h>
#include <linux/vmalloc.h>
@@ -1816,6 +1817,15 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
fc_host_supported_speeds(vha->host) =
fc_host_supported_speeds(base_vha->host);
+ mutex_init(&ha->tgt_mutex);
+ mutex_init(&ha->tgt_host_action_mutex);
+ qla_tgt_clear_mode(vha);
+ qla2x00_send_enable_lun(vha, false);
+ if (IS_QLA24XX_TYPE(ha))
+ ha->atio_q_length = ATIO_ENTRY_CNT_24XX;
+ else if (IS_QLA25XX(ha))
+ ha->atio_q_length = ATIO_ENTRY_CNT_24XX;
+
qla24xx_vport_disable(fc_vport, disable);
if (ha->flags.cpu_affinity_enabled) {
@@ -2020,7 +2030,8 @@ qla2x00_init_host_attr(scsi_qla_host_t *vha)
fc_host_dev_loss_tmo(vha->host) = ha->port_down_retry_count;
fc_host_node_name(vha->host) = wwn_to_u64(vha->node_name);
fc_host_port_name(vha->host) = wwn_to_u64(vha->port_name);
- fc_host_supported_classes(vha->host) = FC_COS_CLASS3;
+ fc_host_supported_classes(vha->host) = ha->enable_class_2 ?
+ (FC_COS_CLASS2|FC_COS_CLASS3) : FC_COS_CLASS3;
fc_host_max_npiv_vports(vha->host) = ha->max_npiv_vports;
fc_host_npiv_vports_inuse(vha->host) = ha->cur_vport_count;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index b74e6b5..b5b2f95 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -28,6 +28,11 @@
/* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */
/* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */
/* #define QL_DEBUG_LEVEL_18 */ /* Output T10 CRC trace messages */
+/* #define QL_DEBUG_LEVEL_21 */ /* Output for target */
+/* #define QL_DEBUG_LEVEL_22 */ /* Output for target management */
+/* #define QL_DEBUG_LEVEL_23 */ /* Output for target scsi packets */
+/* #define QL_DEBUG_LEVEL_24 */ /* Output for target SG lists */
+/* #define QL_DEBUG_LEVEL_25 */ /* Output for target task management */
/*
* Macros use for debugging the driver.
@@ -146,6 +151,35 @@
#define DEBUG18(x) do {} while (0)
#endif
+#if defined(QL_DEBUG_LEVEL_21)
+#define DEBUG21(x) do {x;} while (0)
+#else
+#define DEBUG21(x) do {} while (0)
+#endif
+
+#if defined(QL_DEBUG_LEVEL_22)
+#define DEBUG22(x) do {x;} while (0)
+#else
+#define DEBUG22(x) do {} while (0)
+#endif
+
+#if defined(QL_DEBUG_LEVEL_23)
+#define DEBUG23(x) do {x;} while (0)
+#else
+#define DEBUG23(x) do {} while (0)
+#endif
+
+#if defined(QL_DEBUG_LEVEL_24)
+#define DEBUG24(x) do {x;} while (0)
+#else
+#define DEBUG24(x) do {} while (0)
+#endif
+
+#if defined(QL_DEBUG_LEVEL_25)
+#define DEBUG25(x) do {x;} while (0)
+#else
+#define DEBUG25(x) do {} while (0)
+#endif
/*
* Firmware Dump structure definition
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ccfc8e7..5de7326 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -185,6 +185,7 @@
#define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/
#define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/
#define RESPONSE_ENTRY_CNT_MQ 128 /* Number of response entries.*/
+#define ATIO_ENTRY_CNT_24XX 4096 /* Number of ATIO entries. */
struct req_que;
@@ -546,7 +547,7 @@ typedef struct {
#define MBA_SYSTEM_ERR 0x8002 /* System Error. */
#define MBA_REQ_TRANSFER_ERR 0x8003 /* Request Transfer Error. */
#define MBA_RSP_TRANSFER_ERR 0x8004 /* Response Transfer Error. */
-#define MBA_WAKEUP_THRES 0x8005 /* Request Queue Wake-up. */
+#define MBA_ATIO_TRANSFER_ERR 0x8005 /* ATIO Queue Transfer Error. */
#define MBA_LIP_OCCURRED 0x8010 /* Loop Initialization Procedure */
/* occurred. */
#define MBA_LOOP_UP 0x8011 /* FC Loop UP. */
@@ -886,7 +887,6 @@ typedef struct {
uint16_t response_q_length;
uint32_t request_q_address[2];
uint32_t response_q_address[2];
-
uint16_t lun_enables;
uint8_t command_resource_count;
uint8_t immediate_notify_resource_count;
@@ -1220,11 +1220,27 @@ typedef struct {
* ISP queue - response queue entry definition.
*/
typedef struct {
- uint8_t data[60];
+ uint8_t entry_type; /* Entry type. */
+ uint8_t entry_count; /* Entry count. */
+ uint8_t sys_define; /* System defined. */
+ uint8_t entry_status; /* Entry Status. */
+ uint32_t handle; /* System defined handle */
+ uint8_t data[52];
uint32_t signature;
#define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */
} response_t;
+/*
+ * ISP queue - ATIO queue entry definition.
+ */
+typedef struct {
+ uint8_t entry_type; /* Entry type. */
+ uint8_t entry_count; /* Entry count. */
+ uint8_t data[58];
+ uint32_t signature;
+#define ATIO_PROCESSED 0xDEADDEAD /* Signature */
+} atio_t;
+
typedef union {
uint16_t extended;
struct {
@@ -1686,6 +1702,8 @@ typedef struct fc_port {
uint8_t node_name[WWN_SIZE];
uint8_t port_name[WWN_SIZE];
+ /* True, if confirmed completion is supported */
+ uint8_t conf_compl_supported:1;
port_id_t d_id;
uint16_t loop_id;
uint16_t old_loop_id;
@@ -2616,6 +2634,7 @@ struct qla_hw_data {
void *dcbx_tlv;
dma_addr_t dcbx_tlv_dma;
+ spinlock_t dpc_lock;
struct task_struct *dpc_thread;
uint8_t dpc_active; /* DPC routine is active */
@@ -2692,6 +2711,8 @@ struct qla_hw_data {
struct mutex fce_mutex;
uint32_t pci_attr;
+#define HA_HOST_STR_SIZE 16
+ uint8_t host_str[HA_HOST_STR_SIZE];
uint16_t chip_revision;
uint16_t product_id[4];
@@ -2809,6 +2830,40 @@ struct qla_hw_data {
uint8_t fw_type;
__le32 file_prd_off; /* File firmware product offset */
+
+ /* Protected by hw lock */
+ uint32_t enable_class_2:1;
+ uint32_t enable_explicit_conf:1;
+ uint32_t host_shutting_down:1;
+ uint32_t ini_mode_force_reverse:1;
+ uint32_t node_name_set:1;
+
+ dma_addr_t atio_dma; /* Physical address. */
+ atio_t *atio_ring; /* Base virtual address */
+ atio_t *atio_ring_ptr; /* Current address. */
+ uint16_t atio_ring_index; /* Current index. */
+ uint16_t atio_q_length;
+
+ void *target_lport_ptr;
+ struct qla_target_template *qla2x_tmpl;
+ struct qla_tgt *qla_tgt;
+ struct qla_tgt_cmd *cmds[MAX_OUTSTANDING_COMMANDS];
+ uint16_t current_handle;
+
+ struct qla_tgt_vp_map *tgt_vp_map;
+ struct mutex tgt_mutex;
+ struct mutex tgt_host_action_mutex;
+
+ struct list_head ha_list_entry;
+ int saved_set;
+ uint16_t saved_exchange_count;
+ uint32_t saved_firmware_options_1;
+ uint32_t saved_firmware_options_2;
+ uint32_t saved_firmware_options_3;
+ uint8_t saved_firmware_options[2];
+ uint8_t saved_add_firmware_options[2];
+
+ uint8_t tgt_node_name[WWN_SIZE];
};
/*
@@ -2933,8 +2988,14 @@ typedef struct scsi_qla_host {
int seconds_since_last_heartbeat;
atomic_t vref_count;
+
} scsi_qla_host_t;
+struct qla_tgt_vp_map {
+ uint8_t idx;
+ scsi_qla_host_t *vha;
+};
+
/*
* Macros to help code, maintain, etc.
*/
@@ -2958,6 +3019,7 @@ typedef struct scsi_qla_host {
atomic_dec(&__vha->vref_count); \
} while (0)
+#define to_qla_host(x) ((scsi_qla_host_t *) (x)->hostdata)
#define qla_printk(level, ha, format, arg...) \
dev_printk(level , &((ha)->pdev->dev) , format , ## arg)
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 631fefc..9a1f8b8b 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -26,6 +26,16 @@
#define PDO_FORCE_ADISC BIT_1
#define PDO_FORCE_PLOGI BIT_0
+struct qla_port23_data {
+ uint8_t port_name[WWN_SIZE];
+ uint16_t loop_id;
+};
+
+struct qla_port24_data {
+ uint8_t port_name[WWN_SIZE];
+ uint16_t loop_id;
+ uint16_t reserved;
+};
#define PORT_DATABASE_24XX_SIZE 64
struct port_database_24xx {
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 89e900a..717e6ce 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -53,6 +53,9 @@ extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
+extern void qla2x00_enable_tgt_mode(struct scsi_qla_host *);
+extern void qla2x00_disable_tgt_mode(struct scsi_qla_host *);
+
extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *, uint16_t *);
extern void qla84xx_put_chip(struct scsi_qla_host *);
@@ -172,6 +175,11 @@ extern int qla2x00_vp_abort_isp(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_iocb.c source file.
*/
+
+extern void *qla2x00_alloc_iocbs(scsi_qla_host_t *, srb_t *);
+extern void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
+extern int qla2x00_issue_marker(scsi_qla_host_t *, int);
+
extern uint16_t qla2x00_calc_iocbs_32(uint16_t);
extern uint16_t qla2x00_calc_iocbs_64(uint16_t);
extern void qla2x00_build_scsi_iocbs_32(srb_t *, cmd_entry_t *, uint16_t);
@@ -237,6 +245,9 @@ extern int
qla2x00_init_firmware(scsi_qla_host_t *, uint16_t);
extern int
+qla2x00_get_node_name_list(scsi_qla_host_t *, void **, int *);
+
+extern int
qla2x00_get_port_database(scsi_qla_host_t *, fc_port_t *, uint8_t);
extern int
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 4c08392..3c5fc2b 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -5,6 +5,7 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
+#include "qla_target.h"
static int qla2x00_sns_ga_nxt(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_sns_gid_pt(scsi_qla_host_t *, sw_info_t *);
@@ -540,8 +541,18 @@ qla2x00_rff_id(scsi_qla_host_t *vha)
ct_req->req.rff_id.port_id[0] = vha->d_id.b.domain;
ct_req->req.rff_id.port_id[1] = vha->d_id.b.area;
ct_req->req.rff_id.port_id[2] = vha->d_id.b.al_pa;
+ /*
+ * FC-4 Feature bit 0 indicates target functionality to the name server.
+ */
+ if (qla_tgt_mode_enabled(vha)) {
+ if (qla_ini_mode_enabled(vha))
+ ct_req->req.rff_id.fc4_feature = BIT_0 | BIT_1;
+ else
+ ct_req->req.rff_id.fc4_feature = BIT_0;
+ } else if (qla_ini_mode_enabled(vha)) {
+ ct_req->req.rff_id.fc4_feature = BIT_1;
+ }
- ct_req->req.rff_id.fc4_feature = BIT_1;
ct_req->req.rff_id.fc4_type = 0x08; /* SCSI - FCP */
/* Execute MS IOCB */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d9479c3..02d66a7 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -17,6 +17,10 @@
#include <asm/prom.h>
#endif
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+#include "qla_target.h"
+
/*
* QLogic ISP2x00 Hardware Support Function Prototypes.
*/
@@ -580,6 +584,16 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))
qla24xx_read_fcp_prio_cfg(vha);
+ if (rval == QLA_SUCCESS &&
+ (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))) {
+ /* Enable target response to SCSI bus. */
+ if (qla_tgt_mode_enabled(vha)) {
+ qla2x00_send_enable_lun(vha, true);
+ } else if (qla_ini_mode_enabled(vha)) {
+ qla2x00_send_enable_lun(vha, false);
+ }
+ }
+
return (rval);
}
@@ -1581,6 +1595,30 @@ qla2x00_init_response_q_entries(struct rsp_que *rsp)
}
}
+/*
+ * qla2x00_init_atio_q_entries() - Initializes ATIO queue entries.
+ * @ha: HA context
+ *
+ * Beginning of ATIO ring has initialization control block already built
+ * by nvram config routine.
+ *
+ * Returns 0 on success.
+ */
+static void
+qla2x00_init_atio_q_entries(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ uint16_t cnt;
+ atio_t *pkt;
+
+ pkt = ha->atio_ring;
+ for (cnt = 0; cnt < ha->atio_q_length; cnt++) {
+ pkt->signature = ATIO_PROCESSED;
+ pkt++;
+ }
+
+}
+
/**
* qla2x00_update_fw_options() - Read and process firmware options.
* @ha: HA context
@@ -1733,6 +1771,12 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma));
icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma));
+ /* Setup ATIO queue dma pointers for target mode */
+ icb->atio_q_inpointer = __constant_cpu_to_le16(0);
+ icb->atio_q_length = cpu_to_le16(ha->atio_q_length);
+ icb->atio_q_address[0] = cpu_to_le32(LSD(ha->atio_dma));
+ icb->atio_q_address[1] = cpu_to_le32(MSD(ha->atio_dma));
+
if (ha->mqenable) {
icb->qos = __constant_cpu_to_le16(QLA_DEFAULT_QUE_QOS);
icb->rid = __constant_cpu_to_le16(rid);
@@ -1768,12 +1812,24 @@ qla24xx_config_rings(struct scsi_qla_host *vha)
WRT_REG_DWORD(®->isp25mq.req_q_out, 0);
WRT_REG_DWORD(®->isp25mq.rsp_q_in, 0);
WRT_REG_DWORD(®->isp25mq.rsp_q_out, 0);
+#warning FIXME: atio_q in/out for ha->mqueue=1..?
+#if 0
+ WRT_REG_DWORD(®->isp25mq.atio_q_in, 0);
+ WRT_REG_DWORD(®->isp25mq.atio_q_out, 0);
+ RD_REG_DWORD(®->isp25mq.atio_q_out);
+#endif
} else {
WRT_REG_DWORD(®->isp24.req_q_in, 0);
WRT_REG_DWORD(®->isp24.req_q_out, 0);
WRT_REG_DWORD(®->isp24.rsp_q_in, 0);
WRT_REG_DWORD(®->isp24.rsp_q_out, 0);
+
+ /* Setup APTIO registers for target mode */
+ WRT_REG_DWORD(®->isp24.atio_q_in, 0);
+ WRT_REG_DWORD(®->isp24.atio_q_out, 0);
+ RD_REG_DWORD(®->isp24.atio_q_out);
}
+
/* PCI posting */
RD_REG_DWORD(&ioreg->hccr);
}
@@ -1835,6 +1891,11 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
spin_unlock(&ha->vport_slock);
+ ha->atio_ring_ptr = ha->atio_ring;
+ ha->atio_ring_index = 0;
+ /* Initialize ATIO queue entries */
+ qla2x00_init_atio_q_entries(vha);
+
ha->isp_ops->config_rings(vha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -2045,7 +2106,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
vha->loop_id = loop_id;
/* initialize */
- ha->min_external_loopid = SNS_FIRST_LOOP_ID;
+ ha->min_external_loopid = SNS_FIRST_LOOP_ID + 1;
ha->operating_mode = LOOP;
ha->switch_cap = 0;
@@ -2097,6 +2158,8 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
vha->d_id.b.area = area;
vha->d_id.b.al_pa = al_pa;
+ ha->tgt_vp_map[al_pa].idx = vha->vp_idx;
+
if (!vha->flags.init_done)
qla_printk(KERN_INFO, ha,
"Topology - %s, Host Loop address 0x%x\n",
@@ -2207,6 +2270,13 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
rval = QLA_SUCCESS;
+ if (unlikely(nv == NULL)) {
+ qla_printk(KERN_ERR, ha, "request_ring pointer is NULL\n");
+ dump_stack();
+ rval = 1;
+ goto out;
+ }
+
/* Determine NVRAM starting address. */
ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
@@ -2302,15 +2372,78 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
/*
* Setup driver NVRAM options.
*/
+ if (!IS_QLA2100(ha)) {
+ /* Check if target mode enabled */
+ if (qla_tgt_mode_enabled(vha)) {
+ if (!ha->saved_set) {
+ /* We save only once */
+ ha->saved_firmware_options[0] = nv->firmware_options[0];
+ ha->saved_firmware_options[1] = nv->firmware_options[1];
+ ha->saved_add_firmware_options[0] = nv->add_firmware_options[0];
+ ha->saved_add_firmware_options[1] = nv->add_firmware_options[1];
+ ha->saved_set = 1;
+ }
+ /* Enable target mode */
+ nv->firmware_options[0] |= BIT_4;
+ /* Disable ini mode, if requested */
+ if (!qla_ini_mode_enabled(vha))
+ nv->firmware_options[0] |= BIT_5;
+
+ /* Disable Full Login after LIP */
+ nv->firmware_options[1] &= ~BIT_5;
+ /* Enable initial LIP */
+ nv->firmware_options[1] &= BIT_1;
+ /* Enable FC tapes support */
+ nv->add_firmware_options[1] |= BIT_4;
+ /* Enable Command Queuing in Target Mode */
+ nv->add_firmware_options[1] |= BIT_6;
+ } else {
+ if (ha->saved_set) {
+ nv->firmware_options[0] = ha->saved_firmware_options[0];
+ nv->firmware_options[1] = ha->saved_firmware_options[1];
+ nv->add_firmware_options[0] = ha->saved_add_firmware_options[0];
+ nv->add_firmware_options[1] = ha->saved_add_firmware_options[1];
+ }
+ }
+ }
+
+ if (!IS_QLA2100(ha)) {
+ if (ha->enable_class_2) {
+ if (vha->flags.init_done) {
+ fc_host_supported_classes(vha->host) =
+ FC_COS_CLASS2 | FC_COS_CLASS3;
+ }
+ nv->add_firmware_options[1] |= BIT_0;
+ } else {
+ if (vha->flags.init_done) {
+ fc_host_supported_classes(vha->host) =
+ FC_COS_CLASS3;
+ }
+ nv->add_firmware_options[1] &= BIT_0;
+ }
+ }
+
+ /* Enable ADISC and fairness */
nv->firmware_options[0] |= (BIT_6 | BIT_1);
nv->firmware_options[0] &= ~(BIT_5 | BIT_4);
nv->firmware_options[1] |= (BIT_5 | BIT_0);
+ /* Enable PDB changed AE */
+ nv->firmware_options[1] |= BIT_0;
+ /* Stop Port Queue on Full Status */
nv->firmware_options[1] &= ~BIT_4;
if (IS_QLA23XX(ha)) {
+ /* Enable full duplex */
nv->firmware_options[0] |= BIT_2;
+ /* Disable Fast Status Posting */
nv->firmware_options[0] &= ~BIT_3;
+#if 0
nv->firmware_options[0] &= ~BIT_6;
+#else
+ /* out-of-order frames rassembly */
+ nv->special_options[0] |= BIT_6;
+#endif
+ /* P2P preferred, otherwise loop */
nv->add_firmware_options[1] |= BIT_5 | BIT_4;
if (IS_QLA2300(ha)) {
@@ -2324,6 +2457,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
sizeof(nv->model_number), "QLA23xx");
}
} else if (IS_QLA2200(ha)) {
+ /* Enable full duplex */
nv->firmware_options[0] |= BIT_2;
/*
* 'Point-to-point preferred, else loop' is not a safe
@@ -2355,8 +2489,12 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
while (cnt--)
*dptr1++ = *dptr2++;
- /* Use alternate WWN? */
- if (nv->host_p[1] & BIT_7) {
+ /* For target mode.. */
+ if (ha->node_name_set) {
+ memcpy(icb->node_name, ha->tgt_node_name, WWN_SIZE);
+ icb->firmware_options[1] |= BIT_6;
+ } else if (nv->host_p[1] & BIT_7) {
+ /* Use alternate WWN? */
memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
}
@@ -2493,6 +2631,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
}
}
+out:
if (rval) {
DEBUG2_3(printk(KERN_WARNING
"scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
@@ -2505,14 +2644,22 @@ qla2x00_rport_del(void *data)
{
fc_port_t *fcport = data;
struct fc_rport *rport;
+ scsi_qla_host_t *vha = fcport->vha;
unsigned long flags;
spin_lock_irqsave(fcport->vha->host->host_lock, flags);
rport = fcport->drport ? fcport->drport: fcport->rport;
fcport->drport = NULL;
spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
- if (rport)
+ if (rport) {
fc_remote_port_delete(rport);
+ /*
+ * Release the target mode FC NEXUS in qla2x_target.c code
+ * if target mod is enabled.
+ */
+ if (vha->hw->qla2x_tmpl)
+ qla_tgt_fc_port_deleted(vha, fcport);
+ }
}
/**
@@ -2895,6 +3042,13 @@ qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
"Unable to allocate fc remote port!\n");
return;
}
+ /*
+ * Create target mode FC NEXUS in qla2x_target.c if target mode is
+ * enabled..
+ */
+ if (ha->qla2x_tmpl)
+ qla_tgt_fc_port_added(vha, fcport);
+
spin_lock_irqsave(fcport->vha->host->host_lock, flags);
*((fc_port_t **)rport->dd_data) = fcport;
spin_unlock_irqrestore(fcport->vha->host->host_lock, flags);
@@ -3162,6 +3316,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
struct scsi_qla_host *tvp;
rval = QLA_SUCCESS;
+ wrap.b24 = 0; /* undefined */
/* Try GID_PT to get device list, else GAN. */
swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_KERNEL);
@@ -3554,11 +3709,13 @@ qla2x00_device_resync(scsi_qla_host_t *vha)
continue;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
- if (format != 3 ||
- fcport->port_type != FCT_INITIATOR) {
+ if (vha->hw->qla2x_tmpl != NULL)
qla2x00_mark_device_lost(vha, fcport,
- 0, 0);
- }
+ 0, 0);
+ else if ((format != 3) ||
+ (fcport->port_type != FCT_INITIATOR))
+ qla2x00_mark_device_lost(vha, fcport,
+ 0, 0);
}
}
}
@@ -3706,6 +3863,13 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
if (mb[10] & BIT_1)
fcport->supported_classes |= FC_COS_CLASS3;
+ if (IS_FWI2_CAPABLE(ha)) {
+ if (mb[10] & BIT_7)
+ fcport->conf_compl_supported = 1;
+ } else {
+ /* mb[10] bits are undocumented, ToDo */
+ }
+
rval = QLA_SUCCESS;
break;
} else if (mb[0] == MBS_LOOP_ID_USED) {
@@ -4042,6 +4206,10 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
vha->flags.online = 1;
+ /* Enable target response to SCSI bus. */
+ if (qla_tgt_mode_enabled(vha))
+ qla2x00_send_enable_lun(vha, true);
+
ha->isp_ops->enable_intrs(ha);
ha->isp_abort_cnt = 0;
@@ -4423,6 +4591,64 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
rval = 1;
}
+ /* Check if target mode enabled */
+ if (qla_tgt_mode_enabled(vha)) {
+ if (!ha->saved_set) {
+ /* We save only once */
+ ha->saved_exchange_count = nv->exchange_count;
+ ha->saved_firmware_options_1 = nv->firmware_options_1;
+ ha->saved_firmware_options_2 = nv->firmware_options_2;
+ ha->saved_firmware_options_3 = nv->firmware_options_3;
+ ha->saved_set = 1;
+ }
+
+ nv->exchange_count = __constant_cpu_to_le16(0xFFFF);
+
+ /* Enable target mode */
+ nv->firmware_options_1 |= __constant_cpu_to_le32(BIT_4);
+
+ /* Disable ini mode, if requested */
+ if (!qla_ini_mode_enabled(vha))
+ nv->firmware_options_1 |= __constant_cpu_to_le32(BIT_5);
+
+ /* Disable Full Login after LIP */
+ nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_13);
+ /* Enable initial LIP */
+ nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_9);
+ /* Enable FC tapes support */
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ } else {
+ if (ha->saved_set) {
+ nv->exchange_count = ha->saved_exchange_count;
+ nv->firmware_options_1 = ha->saved_firmware_options_1;
+ nv->firmware_options_2 = ha->saved_firmware_options_2;
+ nv->firmware_options_3 = ha->saved_firmware_options_3;
+ }
+ }
+
+ /* out-of-order frames reassembly */
+ nv->firmware_options_3 |= BIT_6|BIT_9;
+
+ if (ha->enable_class_2) {
+ if (vha->flags.init_done)
+ fc_host_supported_classes(vha->host) =
+ FC_COS_CLASS2 | FC_COS_CLASS3;
+
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_8);
+ } else {
+ if (vha->flags.init_done)
+ fc_host_supported_classes(vha->host) = FC_COS_CLASS3;
+
+ nv->firmware_options_2 &= ~__constant_cpu_to_le32(BIT_8);
+ }
+#if 0
+ /*
+ * firmware_options_3 bits 3-2 are reserved, but for some reason
+ * sometimes set by BIOS. Let's explicitly reset them.
+ */
+ nv->firmware_options_3 &= ~__constant_cpu_to_le32(BIT_3|BIT_2);
+#endif
+
/* Reset Initialization control block */
memset(icb, 0, ha->init_cb_size);
@@ -4450,8 +4676,11 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
"QLA2462");
- /* Use alternate WWN? */
- if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+ if (ha->node_name_set) {
+ memcpy(icb->node_name, ha->tgt_node_name, WWN_SIZE);
+ icb->firmware_options_1 |= __constant_cpu_to_le32(BIT_14);
+ } else if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+ /* Use alternate WWN? */
memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 4c1ba62..6e75dbb 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -5,14 +5,13 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
+#include "qla_target.h"
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_tcq.h>
-static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
-
static void qla25xx_set_que(srb_t *, struct rsp_que **);
/**
* qla2x00_get_cmd_direction() - Determine control_flag data direction.
@@ -518,13 +517,112 @@ qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
return (ret);
}
+/*
+ * qla2x00_issue_marker
+ *
+ * Issue marker
+ * Caller CAN have hardware lock held as specified by ha_locked parameter.
+ * Might release it, then reaquire.
+ */
+int qla2x00_issue_marker(scsi_qla_host_t *vha, int ha_locked)
+{
+ if (ha_locked) {
+ if (__qla2x00_marker(vha, vha->req, vha->req->rsp, 0, 0,
+ MK_SYNC_ALL) != QLA_SUCCESS)
+ return QLA_FUNCTION_FAILED;
+ } else {
+ if (qla2x00_marker(vha, vha->req, vha->req->rsp, 0, 0,
+ MK_SYNC_ALL) != QLA_SUCCESS)
+ return QLA_FUNCTION_FAILED;
+ }
+ vha->marker_needed = 0;
+
+ return QLA_SUCCESS;
+}
+EXPORT_SYMBOL(qla2x00_issue_marker);
+
+/**
+ * qla2x00_req_pkt() - Retrieve a request packet from the request ring.
+ * @ha: HA context
+ *
+ * Note: The caller must hold the hardware lock before calling this routine.
+ * Might release it, then reaquire.
+ *
+ * Returns NULL if function failed, else, a pointer to the request packet.
+ */
+request_t *
+qla2x00_req_pkt(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ device_reg_t __iomem *reg = ha->iobase;
+ request_t *pkt = NULL;
+ uint32_t *dword_ptr, timer;
+ uint16_t req_cnt = 1, cnt;
+
+ /* Wait 1 second for slot. */
+ for (timer = HZ; timer; timer--) {
+ if ((req_cnt + 2) >= vha->req->cnt) {
+ /* Calculate number of free request entries. */
+ if (IS_FWI2_CAPABLE(ha))
+ cnt = (uint16_t)RD_REG_DWORD(®->isp24.req_q_out);
+ else
+ cnt = qla2x00_debounce_register(
+ ISP_REQ_Q_OUT(ha, ®->isp));
+
+ if (vha->req->ring_index < cnt)
+ vha->req->cnt = cnt - vha->req->ring_index;
+ else
+ vha->req->cnt = vha->req->length -
+ (vha->req->ring_index - cnt);
+ }
+
+ /* If room for request in request ring. */
+ if ((req_cnt + 2) < vha->req->cnt) {
+ vha->req->cnt--;
+ pkt = vha->req->ring_ptr;
+
+ /* Zero out packet. */
+ dword_ptr = (uint32_t *)pkt;
+ for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
+ *dword_ptr++ = 0;
+
+ /* Set system defined field. */
+ pkt->sys_define = (uint8_t)vha->req->ring_index;
+
+ /* Set entry count. */
+ pkt->entry_count = 1;
+
+ return pkt;
+ }
+
+ /* Release ring specific lock */
+ spin_unlock_irq(&ha->hardware_lock);
+
+ /* 2 us */
+ udelay(2);
+ /*
+ * Check for pending interrupts, during init we issue marker directly
+ */
+ if (!vha->marker_needed && !vha->flags.init_done)
+ qla2x00_poll(vha->req->rsp);
+
+ /* Reaquire ring specific lock */
+ spin_lock_irq(&ha->hardware_lock);
+ }
+
+ printk(KERN_INFO "Unable to locate request_t *pkt in ring\n");
+ dump_stack();
+
+ return NULL;
+}
+
/**
* qla2x00_isp_cmd() - Modify the request ring pointer.
* @ha: HA context
*
* Note: The caller must hold the hardware lock before calling this routine.
*/
-static void
+void
qla2x00_isp_cmd(struct scsi_qla_host *vha, struct req_que *req)
{
struct qla_hw_data *ha = vha->hw;
@@ -578,6 +676,7 @@ qla2x00_isp_cmd(struct scsi_qla_host *vha, struct req_que *req)
}
}
+EXPORT_SYMBOL(qla2x00_isp_cmd);
/**
* qla24xx_calc_iocbs() - Determine number of Command Type 3 and
@@ -1573,6 +1672,7 @@ skip_cmd_array:
queuing_error:
return pkt;
}
+EXPORT_SYMBOL(qla2x00_alloc_iocbs);
static void
qla2x00_start_iocbs(srb_t *sp)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d17ed9a..cfb58e1 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -5,6 +5,7 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
+#include "qla_target.h"
#include <linux/delay.h>
#include <linux/slab.h>
@@ -212,6 +213,12 @@ qla2300_intr_handler(int irq, void *dev_id)
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
qla2x00_async_event(vha, rsp, mb);
break;
+ case 0x17: /* FAST_CTIO_COMP */
+ mb[0] = MBA_CTIO_COMPLETION;
+ mb[1] = MSW(stat);
+ mb[2] = RD_MAILBOX_REG(ha, reg, 2);
+ qla2x00_async_event(vha, rsp, mb);
+ break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
@@ -304,6 +311,9 @@ qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
"IDC failed to post ACK.\n");
}
+extern void qla2xxx_ctio_completion(scsi_qla_host_t *, uint32_t);
+extern void qla_tgt_async_event(uint16_t, scsi_qla_host_t *, uint16_t *);
+
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
@@ -331,6 +341,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
if (IS_QLA8XXX_TYPE(ha))
goto skip_rio;
switch (mb[0]) {
+ case MBA_CTIO_COMPLETION:
case MBA_SCSI_COMPLETION:
handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1]));
handle_cnt = 1;
@@ -392,6 +403,10 @@ skip_rio:
handles[cnt]);
break;
+ case MBA_CTIO_COMPLETION:
+ qla2xxx_ctio_completion(vha, handles[0]);
+ break;
+
case MBA_RESET: /* Reset */
DEBUG2(printk("scsi(%ld): Asynchronous RESET.\n",
vha->host_no));
@@ -446,12 +461,20 @@ skip_rio:
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
-
+#if 0
case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
DEBUG2(printk("scsi(%ld): Asynchronous WAKEUP_THRES.\n",
vha->host_no));
break;
+#else
+ case MBA_ATIO_TRANSFER_ERR: /* ATIO Queue Transfer Error */
+ DEBUG2(printk(KERN_INFO "scsi(%ld): ATIO Transfer Error.\n",
+ vha->host_no));
+ qla_printk(KERN_WARNING, ha, "ATIO Transfer Error.\n");
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ break;
+#endif
case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
DEBUG2(printk("scsi(%ld): LIP occurred (%x).\n", vha->host_no,
mb[1]));
@@ -677,6 +700,15 @@ skip_rio:
DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE "
"ignored %04x/%04x/%04x.\n", vha->host_no, mb[1],
mb[2], mb[3]));
+
+ DEBUG2(printk(KERN_INFO "scsi(%ld): ha state %d "
+ "init_done %d oper_mode %d topo %d\n",
+ vha->host_no, atomic_read(&vha->loop_state),
+ vha->flags.init_done, ha->operating_mode,
+ ha->current_topology));
+
+ if (ha->qla2x_tmpl)
+ qla_tgt_async_event(mb[0], vha, mb);
break;
}
@@ -697,6 +729,9 @@ skip_rio:
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
+
+ if (ha->qla2x_tmpl)
+ qla_tgt_async_event(mb[0], vha, mb);
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
@@ -818,6 +853,36 @@ skip_rio:
case MBA_IDC_TIME_EXT:
qla81xx_idc_event(vha, mb[0], mb[1]);
break;
+ case MBA_LOOP_INIT_ERR:
+ printk(KERN_INFO "scsi(%ld): Loop init error received -- "
+ "%04x %04x %04x.\n", vha->host_no, mb[1], mb[2], mb[3]);
+ break;
+ default:
+ printk(KERN_INFO "scsi(%ld): Unhandled async event %d "
+ "received -- %04x %04x %04x.\n", vha->host_no,
+ mb[0], mb[1], mb[2], mb[3]);
+ break;
+ }
+
+ switch (mb[0]) {
+ case MBA_POINT_TO_POINT: /* Point-to-Point */
+ case MBA_CHG_IN_CONNECTION: /* Change in connection mode */
+ if (IS_QLA2100(ha))
+ break;
+ /* else go through */
+ case MBA_RESET: /* Reset */
+ case MBA_SYSTEM_ERR: /* System Error */
+ case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
+ case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
+ case MBA_ATIO_TRANSFER_ERR: /* ATIO Queue Transfer Error */
+ case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */
+ case MBA_LOOP_UP: /* Loop Up Event */
+ case MBA_LOOP_DOWN: /* Loop Down Event */
+ case MBA_LIP_RESET: /* LIP reset occurred */
+ default:
+ if (ha->qla2x_tmpl)
+ qla_tgt_async_event(mb[0], vha, mb);
+ break;
}
if (!vha->vp_idx && ha->num_vhosts)
@@ -836,6 +901,11 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
+ if (HANDLE_IS_CTIO_COMP(index)) {
+ qla2xxx_ctio_completion(vha, index);
+ return;
+ }
+
/* Validate handle. */
if (index >= MAX_OUTSTANDING_COMMANDS) {
DEBUG2(printk("scsi(%ld): Invalid SCSI completion handle %d.\n",
@@ -843,6 +913,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
qla_printk(KERN_WARNING, ha,
"Invalid SCSI completion handle %d.\n", index);
+ DEBUG2(dump_stack());
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
return;
}
@@ -861,6 +932,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha,
qla_printk(KERN_WARNING, ha,
"Invalid ISP SCSI completion handle\n");
+ DEBUG2(dump_stack());
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
}
}
@@ -1320,6 +1392,8 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
iocb->done(sp);
}
+extern void qla_tgt_response_pkt_all_vps(scsi_qla_host_t *, response_t *);
+
/**
* qla2x00_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
@@ -1342,6 +1416,9 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (sts_entry_t *)rsp->ring_ptr;
+ DEBUG5(printk(KERN_INFO "%s(): IOCB data:\n", __func__));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)pkt, RESPONSE_ENTRY_SIZE));
+
rsp->ring_index++;
if (rsp->ring_index == rsp->length) {
rsp->ring_index = 0;
@@ -1354,13 +1431,37 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
DEBUG3(printk(KERN_INFO
"scsi(%ld): Process error entry.\n", vha->host_no));
- qla2x00_error_entry(vha, rsp, pkt);
- ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
- wmb();
- continue;
+ switch (pkt->entry_type) {
+ case ACCEPT_TGT_IO_TYPE:
+ case CONTINUE_TGT_IO_TYPE:
+ case CTIO_A64_TYPE:
+ case IMMED_NOTIFY_TYPE:
+ case NOTIFY_ACK_TYPE:
+ case ENABLE_LUN_TYPE:
+ case MODIFY_LUN_TYPE:
+ break;
+ default:
+ ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
+ wmb();
+ continue;
+ }
}
switch (pkt->entry_type) {
+ case ACCEPT_TGT_IO_TYPE:
+ case CONTINUE_TGT_IO_TYPE:
+ case CTIO_A64_TYPE:
+ case IMMED_NOTIFY_TYPE:
+ case NOTIFY_ACK_TYPE:
+ case ENABLE_LUN_TYPE:
+ case MODIFY_LUN_TYPE:
+ DEBUG5(printk(KERN_WARNING "qla2x00_response_pkt: calling"
+ " tgt_response_pkt %p (type %02X)\n",
+ qla_target.tgt_response_pkt, pkt->entry_type););
+
+ if (vha->hw->qla2x_tmpl)
+ qla_tgt_response_pkt_all_vps(vha, (response_t *)pkt);
+ break;
case STATUS_TYPE:
qla2x00_status_entry(vha, rsp, pkt);
break;
@@ -1388,6 +1489,9 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
case CT_IOCB_TYPE:
qla2x00_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
break;
+ case MARKER_TYPE:
+ printk("Got MARKER_TYPE response packet!!\n");
+ break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
@@ -1547,6 +1651,16 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
+ DEBUG3(printk(KERN_WARNING "scsi(%ld): Status Type %#x:\n"
+ " entry_count\t%d\n entry_status\t%#x\n"
+ " handle:\t%#x\n scsi_status:\t%#x\n"
+ " comp_status:\t%#x\n state_flags:\t%#x\n"
+ " status_flags:\t%#x\n", vha->host_no,
+ sts->entry_type, sts->entry_count,
+ sts->entry_status, sts->handle,
+ sts->scsi_status, sts->comp_status,
+ sts->state_flags, sts->status_flags));
+
qla2x00_process_completed_request(vha, req, handle);
return;
@@ -1870,9 +1984,12 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
uint16_t que = MSW(pkt->handle);
struct req_que *req = ha->req_q_map[que];
#if defined(QL_DEBUG_LEVEL_2)
- if (pkt->entry_status & RF_INV_E_ORDER)
+ qla_printk(KERN_ERR, ha, "%s: Error entry with type %x:\n", __func__,
+ pkt->entry_type);
+ if (pkt->entry_status & RF_INV_E_ORDER) {
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
- else if (pkt->entry_status & RF_INV_E_COUNT)
+ qla2x00_dump_buffer((void *)pkt, sizeof(*pkt));
+ } else if (pkt->entry_status & RF_INV_E_COUNT)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Count\n", __func__);
else if (pkt->entry_status & RF_INV_E_PARAM)
qla_printk(KERN_ERR, ha,
@@ -1949,6 +2066,60 @@ qla24xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n",
__func__, vha->host_no));
}
+
+#if defined(QL_DEBUG_LEVEL_1)
+ printk(KERN_INFO "scsi(%ld): Mailbox registers:", vha->host_no);
+ for (cnt = 0; cnt < vha->mbx_count; cnt++) {
+ if ((cnt % 4) == 0)
+ printk(KERN_CONT "\n");
+ printk("mbox %02d: 0x%04x ", cnt, ha->mailbox_out[cnt]);
+ }
+ printk(KERN_CONT "\n");
+#endif
+}
+
+extern void qla24xx_atio_pkt_all_vps(struct scsi_qla_host *, atio7_entry_t *);
+
+/*
+ * qla24xx_process_atio_queue() - Process ATIO queue entries.
+ * @ha: SCSI driver HA context
+ */
+static void
+qla24xx_process_atio_queue(struct scsi_qla_host *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+ atio_t *pkt;
+ int cnt, i;
+
+ if (!vha->flags.online)
+ return;
+
+ while (ha->atio_ring_ptr->signature != ATIO_PROCESSED) {
+ pkt = ha->atio_ring_ptr;
+ cnt = pkt->entry_count;
+
+ DEBUG5(printk(KERN_INFO "%s(): IOCB data:\n", __func__));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)pkt, RESPONSE_ENTRY_SIZE));
+
+ qla24xx_atio_pkt_all_vps(vha, (atio7_entry_t *)pkt);
+
+ for (i = 0; i < cnt; i++) {
+ ha->atio_ring_index++;
+ if (ha->atio_ring_index == ha->atio_q_length) {
+ ha->atio_ring_index = 0;
+ ha->atio_ring_ptr = ha->atio_ring;
+ } else
+ ha->atio_ring_ptr++;
+
+ pkt->signature = ATIO_PROCESSED;
+ pkt = ha->atio_ring_ptr;
+ }
+ wmb();
+ }
+
+ /* Adjust ring index */
+ WRT_REG_DWORD(®->atio_q_out, ha->atio_ring_index);
}
/**
@@ -1967,6 +2138,9 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) {
pkt = (struct sts_entry_24xx *)rsp->ring_ptr;
+ DEBUG5(printk(KERN_INFO "%s(): IOCB data:\n", __func__));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)pkt, RESPONSE_ENTRY_SIZE));
+
rsp->ring_index++;
if (rsp->ring_index == rsp->length) {
rsp->ring_index = 0;
@@ -1980,9 +2154,18 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
"scsi(%ld): Process error entry.\n", vha->host_no));
qla2x00_error_entry(vha, rsp, (sts_entry_t *) pkt);
- ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
- wmb();
- continue;
+
+ switch (pkt->entry_type) {
+ case ABTS_RECV_24XX:
+ case ABTS_RESP_24XX:
+ case CTIO_TYPE7:
+ case NOTIFY_ACK_TYPE:
+ break;
+ default:
+ ((response_t *)pkt)->signature = RESPONSE_PROCESSED;
+ wmb();
+ continue;
+ }
}
switch (pkt->entry_type) {
@@ -2011,6 +2194,18 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
case ELS_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
break;
+ case ABTS_RECV_24XX:
+ /* ensure that the ATIO queue is empty */
+ qla24xx_process_atio_queue(vha);
+ case ABTS_RESP_24XX:
+ case CTIO_TYPE7:
+ case NOTIFY_ACK_TYPE:
+
+ if (vha->hw->qla2x_tmpl)
+ qla_tgt_response_pkt_all_vps(vha, (response_t *)pkt);
+ break;
+ case MARKER_TYPE:
+ break;
default:
/* Type Not Supported. */
DEBUG4(printk(KERN_WARNING
@@ -2156,6 +2351,13 @@ qla24xx_intr_handler(int irq, void *dev_id)
case 0x14:
qla24xx_process_response_queue(vha, rsp);
break;
+ case 0x1C: /* ATIO queue updated */
+ qla24xx_process_atio_queue(vha);
+ break;
+ case 0x1D: /* ATIO and response queues updated */
+ qla24xx_process_atio_queue(vha);
+ qla24xx_process_response_queue(vha, rsp);
+ break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
@@ -2300,6 +2502,13 @@ qla24xx_msix_default(int irq, void *dev_id)
case 0x14:
qla24xx_process_response_queue(vha, rsp);
break;
+ case 0x1C: /* ATIO queue updated */
+ qla24xx_process_atio_queue(vha);
+ break;
+ case 0x1D: /* ATIO and response queues updated */
+ qla24xx_process_atio_queue(vha);
+ qla24xx_process_response_queue(vha, rsp);
+ break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
"(%d).\n",
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e473e9f..42bc647 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -5,11 +5,11 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
+#include "qla_target.h"
#include <linux/delay.h>
#include <linux/gfp.h>
-
/*
* qla2x00_mailbox_command
* Issue mailbox command and waits for completion.
@@ -29,7 +29,7 @@
* Context:
* Kernel context.
*/
-static int
+int
qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
{
int rval;
@@ -1142,6 +1142,33 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size)
DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
vha->host_no));
+ if (!qla_tgt_mode_enabled(vha) && !qla_ini_mode_enabled(vha)) {
+ DEBUG11(printk("qla2x00_init_firmware(%ld): neither initiator, "
+ "nor target mode enabled, exiting\n", vha->host_no));
+ return QLA_SUCCESS;
+ }
+
+#ifdef QL_DEBUG_LEVEL_5
+ if (IS_FWI2_CAPABLE(ha)) {
+ struct init_cb_24xx *icb = (struct init_cb_24xx *)vha->init_cb;
+ DEBUG5(printk(KERN_INFO "%s(): firmware_options_1 %x, "
+ "firmware_options_2 %x, firmware_options_3 %x\n",
+ __func__, icb->firmware_options_1,
+ icb->firmware_options_2, icb->firmware_options_3));
+ DEBUG5(printk(KERN_INFO "%s(): Control Block:\n", __func__));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)icb, sizeof(*icb)));
+ } else {
+ init_cb_t *icb = (init_cb_t *)vha->init_cb;
+ DEBUG5(printk(KERN_INFO "%s(): firmware_options[0] %x, "
+ "firmware_options[1] %x, add_firmware_options[0] %x, "
+ "add_firmware_options[1] %x\n", __func__,
+ icb->firmware_options[0], icb->firmware_options[1],
+ icb->add_firmware_options[0],
+ icb->add_firmware_options[1]));
+ DEBUG5(printk(KERN_INFO "%s(): Control Block:\n", __func__));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)icb, sizeof(*icb)));
+ }
+#endif
if (IS_QLA82XX(ha) && ql2xdbwr)
qla82xx_wr_32(ha, ha->nxdb_wr_ptr,
(0x04 | (ha->portnum << 5) | (0 << 8) | (0 << 16)));
@@ -1187,6 +1214,100 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size)
}
/*
+ * qla2x00_get_node_name_list
+ * Issue get node name list mailbox command, kmalloc()
+ * and return the resulting list. Caller must kfree() it!
+ *
+ * Input:
+ * ha = adapter state pointer.
+ * out_data = resulting list
+ * out_len = length of the resulting list
+ *
+ * Returns:
+ * qla2x00 local function return status code.
+ *
+ * Context:
+ * Kernel context.
+ */
+int
+qla2x00_get_node_name_list(scsi_qla_host_t *vha, void **out_data, int *out_len)
+{
+ struct qla_hw_data *ha = vha->hw;
+ struct qla_port24_data *list = NULL;
+ void *pmap;
+ mbx_cmd_t mc;
+ dma_addr_t pmap_dma;
+ ulong dma_size;
+ int rval, left;
+
+ BUILD_BUG_ON(sizeof(struct qla_port24_data) <
+ sizeof(struct qla_port23_data));
+
+ left = 1;
+ while (left > 0) {
+ dma_size = left * sizeof(*list);
+ pmap = dma_alloc_coherent(&ha->pdev->dev, dma_size,
+ &pmap_dma, GFP_KERNEL);
+ if (!pmap) {
+ printk(KERN_ERR "%s(%ld): DMA Alloc failed of "
+ "%ld\n", __func__, vha->host_no, dma_size);
+ rval = QLA_MEMORY_ALLOC_FAILED;
+ goto out;
+ }
+
+ mc.mb[0] = MBC_PORT_NODE_NAME_LIST;
+ mc.mb[1] = BIT_1 | BIT_3;
+ mc.mb[2] = MSW(pmap_dma);
+ mc.mb[3] = LSW(pmap_dma);
+ mc.mb[6] = MSW(MSD(pmap_dma));
+ mc.mb[7] = LSW(MSD(pmap_dma));
+ mc.mb[8] = dma_size;
+ mc.out_mb = MBX_0|MBX_1|MBX_2|MBX_3|MBX_6|MBX_7|MBX_8;
+ mc.in_mb = MBX_0|MBX_1;
+ mc.tov = 30;
+ mc.flags = MBX_DMA_IN;
+
+ rval = qla2x00_mailbox_command(vha, &mc);
+ if (rval != QLA_SUCCESS) {
+ if ((mc.mb[0] == MBS_COMMAND_ERROR) &&
+ (mc.mb[1] == 0xA)) {
+ if (IS_FWI2_CAPABLE(ha))
+ left += le16_to_cpu(mc.mb[2]) / sizeof(struct qla_port24_data);
+ else
+ left += le16_to_cpu(mc.mb[2]) / sizeof(struct qla_port23_data);
+ goto restart;
+ }
+ goto out_free;
+ }
+
+ left = 0;
+
+ list = kzalloc(dma_size, GFP_KERNEL);
+ if (!list) {
+ printk(KERN_ERR "%s(%ld): failed to allocate node names"
+ " list structure.\n", __func__, vha->host_no);
+ rval = QLA_MEMORY_ALLOC_FAILED;
+ goto out_free;
+ }
+
+ memcpy(list, pmap, dma_size);
+restart:
+ dma_free_coherent(&ha->pdev->dev, dma_size, pmap, pmap_dma);
+ }
+
+ *out_data = list;
+ *out_len = dma_size;
+
+out:
+ return rval;
+
+out_free:
+ dma_free_coherent(&ha->pdev->dev, dma_size, pmap, pmap_dma);
+ return rval;
+}
+EXPORT_SYMBOL(qla2x00_get_node_name_list);
+
+/*
* qla2x00_get_port_database
* Issue normal/enhanced get port database mailbox command
* and copy device name as necessary.
@@ -1281,10 +1402,17 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
fcport->d_id.b.rsvd_1 = 0;
/* If not target must be initiator or unknown type. */
- if ((pd24->prli_svc_param_word_3[0] & BIT_4) == 0)
- fcport->port_type = FCT_INITIATOR;
- else
+ if ((pd24->prli_svc_param_word_3[0] & BIT_4))
fcport->port_type = FCT_TARGET;
+ else if ((pd24->prli_svc_param_word_3[0] & BIT_5))
+ fcport->port_type = FCT_INITIATOR;
+
+ /* Passback COS information. */
+ fcport->supported_classes = (pd24->flags & PDF_CLASS_2) ?
+ FC_COS_CLASS2 : FC_COS_CLASS3;
+
+ if (pd24->prli_svc_param_word_3[0] & BIT_7)
+ fcport->conf_compl_supported = 1;
} else {
/* Check for logged in state. */
if (pd->master_state != PD_STATE_PORT_LOGGED_IN &&
@@ -1304,14 +1432,17 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
fcport->d_id.b.rsvd_1 = 0;
/* If not target must be initiator or unknown type. */
- if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0)
- fcport->port_type = FCT_INITIATOR;
- else
+ if ((pd24->prli_svc_param_word_3[0] & BIT_4))
fcport->port_type = FCT_TARGET;
+ else if ((pd24->prli_svc_param_word_3[0] & BIT_5))
+ fcport->port_type = FCT_INITIATOR;
/* Passback COS information. */
fcport->supported_classes = (pd->options & BIT_4) ?
FC_COS_CLASS2: FC_COS_CLASS3;
+
+ if (pd->prli_svc_param_word_3[0] & BIT_7)
+ fcport->conf_compl_supported = 1;
}
gpd_error_out:
@@ -1326,6 +1457,7 @@ gpd_error_out:
return rval;
}
+EXPORT_SYMBOL(qla2x00_get_port_database);
/*
* qla2x00_get_firmware_state
@@ -1684,6 +1816,8 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain,
mb[10] |= BIT_0; /* Class 2. */
if (lg->io_parameter[9] || lg->io_parameter[10])
mb[10] |= BIT_1; /* Class 3. */
+ if (lg->io_parameter[0] & __constant_cpu_to_le32(BIT_7))
+ mb[10] |= BIT_7; /* Confirmed Completion Allowed */
}
dma_pool_free(ha->s_dma_pool, lg, lg_dma);
@@ -2033,6 +2167,8 @@ int
qla2x00_get_id_list(scsi_qla_host_t *vha, void *id_list, dma_addr_t id_list_dma,
uint16_t *entries)
{
+
+ struct qla_hw_data *ha = vha->hw;
int rval;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
@@ -2061,7 +2197,14 @@ qla2x00_get_id_list(scsi_qla_host_t *vha, void *id_list, dma_addr_t id_list_dma,
mcp->out_mb |= MBX_6|MBX_3|MBX_2|MBX_1;
}
mcp->in_mb = MBX_1|MBX_0;
- mcp->tov = MBX_TOV_SECONDS;
+
+ if (ha->qla2x_tmpl == NULL)
+ mcp->tov = MBX_TOV_SECONDS;
+ else {
+ mcp->tov = (ha->login_timeout * 2) + (ha->login_timeout / 2);
+ DEBUG11(printk("Using target mode mcp->tiov: %d\n", mcp->tov));
+ }
+
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -2077,6 +2220,7 @@ qla2x00_get_id_list(scsi_qla_host_t *vha, void *id_list, dma_addr_t id_list_dma,
return rval;
}
+EXPORT_SYMBOL(qla2x00_get_id_list);
/*
* qla2x00_get_resource_cnts
@@ -3010,6 +3154,17 @@ qla24xx_modify_vp_config(scsi_qla_host_t *vha)
vpmod->vp_count = 1;
vpmod->vp_index1 = vha->vp_idx;
vpmod->options_idx1 = BIT_3|BIT_4|BIT_5;
+ /* Enable target mode */
+ if (qla_tgt_mode_enabled(vha)) {
+ DEBUG11(printk("MODE_TARGET enabled, clearing BIT_5\n"));
+ vpmod->options_idx1 &= ~BIT_5;
+ }
+ /* Disable ini mode, if requested */
+ if (!qla_ini_mode_enabled(vha)) {
+ DEBUG11(printk("MODE_INITIATOR disabled, clearing BIT_4\n"));
+ vpmod->options_idx1 &= ~BIT_4;
+ }
+
memcpy(vpmod->node_name_idx1, vha->node_name, WWN_SIZE);
memcpy(vpmod->port_name_idx1, vha->port_name, WWN_SIZE);
vpmod->entry_count = 1;
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 2b69392..50a5c2a 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -6,6 +6,7 @@
*/
#include "qla_def.h"
#include "qla_gbl.h"
+#include "qla_target.h"
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
@@ -48,6 +49,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
spin_lock_irqsave(&ha->vport_slock, flags);
list_add_tail(&vha->list, &ha->vp_list);
+ ha->tgt_vp_map[vp_id].vha = vha;
spin_unlock_irqrestore(&ha->vport_slock, flags);
mutex_unlock(&ha->vport_lock);
@@ -78,6 +80,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
spin_lock_irqsave(&ha->vport_slock, flags);
}
list_del(&vha->list);
+ ha->tgt_vp_map[vha->vp_idx].vha = NULL;
spin_unlock_irqrestore(&ha->vport_slock, flags);
vp_id = vha->vp_idx;
@@ -143,12 +146,16 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
int
qla24xx_disable_vp(scsi_qla_host_t *vha)
{
+ struct qla_hw_data *ha = vha->hw;
int ret;
ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
+ /* Remove port id from vp target map */
+ ha->tgt_vp_map[vha->d_id.b.al_pa].idx = 0;
+
qla2x00_mark_vp_devices_dead(vha);
atomic_set(&vha->vp_state, VP_FAILED);
vha->flags.management_server_logged_in = 0;
@@ -266,6 +273,8 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
int
qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
{
+ int ret;
+
/*
* Physical port will do most of the abort and recovery work. We can
* just treat it as a loop down
@@ -288,7 +297,17 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
DEBUG15(printk("scsi(%ld): Scheduling enable of Vport %d...\n",
vha->host_no, vha->vp_idx));
- return qla24xx_enable_vp(vha);
+ ret = qla24xx_enable_vp(vha);
+ if (ret)
+ return ret;
+
+ /* Enable target response to SCSI bus. */
+ if (qla_tgt_mode_enabled(vha)) {
+ DEBUG15(printk("qla2x00_vp_abort_isp() calling qla2x00_send_enable_lun()\n"));
+ qla2x00_send_enable_lun(vha, true);
+ }
+
+ return 0;
}
static int
@@ -375,17 +394,22 @@ qla24xx_vport_create_req_sanity_check(struct fc_vport *fc_vport)
scsi_qla_host_t *vha;
uint8_t port_name[WWN_SIZE];
- if (fc_vport->roles != FC_PORT_ROLE_FCP_INITIATOR)
+ if (fc_vport->roles != FC_PORT_ROLE_FCP_INITIATOR) {
+ DEBUG15(printk("fc_vport->roles != FC_PORT_ROLE_FCP_INITIATOR\n"));
return VPCERR_UNSUPPORTED;
+ }
/* Check up the F/W and H/W support NPIV */
- if (!ha->flags.npiv_supported)
+ if (!ha->flags.npiv_supported) {
+ DEBUG15(printk("!ha->flags.npiv_supported\n"));
return VPCERR_UNSUPPORTED;
+ }
/* Check up whether npiv supported switch presented */
- if (!(ha->switch_cap & FLOGI_MID_SUPPORT))
+ if (!(ha->switch_cap & FLOGI_MID_SUPPORT)) {
+ DEBUG15(printk("!(ha->switch_cap & FLOGI_MID_SUPPORT))\n"));
return VPCERR_NO_FABRIC_SUPP;
-
+ }
/* Check up unique WWPN */
u64_to_wwn(fc_vport->port_name, port_name);
if (!memcmp(port_name, base_vha->port_name, WWN_SIZE))
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f27724d..b1e2820 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5,6 +5,7 @@
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_def.h"
+#include "qla_target.h"
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
@@ -20,6 +21,12 @@
#include <scsi/scsi_transport_fc.h>
/*
+ * List of ha's and mutex protecting it.
+ */
+static LIST_HEAD(qla_ha_list);
+static DEFINE_MUTEX(qla_ha_list_mutex);
+
+/*
* Driver version
*/
char qla2x00_version_str[40];
@@ -59,6 +66,12 @@ module_param(ql2xloginretrycount, int, S_IRUGO);
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
+int ql2xenableclass2;
+module_param(ql2xenableclass2, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xenableclass2,
+ "Specify if Class 2 operations are supported from the very "
+ "beginning.");
+
int ql2xallocfwdump = 1;
module_param(ql2xallocfwdump, int, S_IRUGO);
MODULE_PARM_DESC(ql2xallocfwdump,
@@ -208,6 +221,8 @@ struct scsi_host_template qla2xxx_driver_template = {
.max_sectors = 0xFFFF,
.shost_attrs = qla2x00_host_attrs,
+
+ .supported_mode = MODE_INITIATOR | MODE_TARGET,
};
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
@@ -679,6 +694,7 @@ qla2x00_wait_for_hba_online(scsi_qla_host_t *vha)
return (return_status);
}
+EXPORT_SYMBOL(qla2x00_wait_for_hba_online);
/*
* qla2x00_wait_for_reset_ready
@@ -768,7 +784,7 @@ qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
* Success (LOOP_READY) : 0
* Failed (LOOP_NOT_READY) : 1
*/
-static inline int
+int
qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
{
int return_status = QLA_SUCCESS;
@@ -801,6 +817,38 @@ sp_get(struct srb *sp)
atomic_inc(&sp->ref_count);
}
+void
+qla2xxx_abort_fcport_cmds(fc_port_t *fcport)
+{
+ scsi_qla_host_t *vha = fcport->vha;
+ struct qla_hw_data *ha = vha->hw;
+ srb_t *sp;
+ unsigned long flags;
+ int cnt;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ sp = vha->req->outstanding_cmds[cnt];
+ if (!sp)
+ continue;
+ if (sp->fcport != fcport)
+ continue;
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ if (ha->isp_ops->abort_command(sp)) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Abort failed -- %lx\n", sp->cmd->serial_number));
+ } else {
+ if (qla2x00_eh_wait_on_command(sp->cmd) != QLA_SUCCESS)
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Abort failed while waiting -- %lx\n",
+ sp->cmd->serial_number));
+ }
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
/**************************************************************************
* qla2xxx_eh_abort
*
@@ -1939,6 +1987,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto probe_out;
}
ha->pdev = pdev;
+ ha->enable_class_2 = ql2xenableclass2;
/* Clear our data area */
ha->bars = bars;
@@ -2010,6 +2059,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
+ ha->atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
ha->gid_list_info_size = 8;
@@ -2024,6 +2074,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->mbx_count = MAILBOX_REGISTER_COUNT;
req_length = REQUEST_ENTRY_CNT_24XX;
rsp_length = RESPONSE_ENTRY_CNT_2300;
+ ha->atio_q_length = ATIO_ENTRY_CNT_24XX;
ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
ha->gid_list_info_size = 8;
@@ -2064,6 +2115,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA;
}
+ spin_lock_init(&ha->dpc_lock);
+
mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
@@ -2108,7 +2161,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
else
base_vha->mgmt_svr_loop_id = MANAGEMENT_SERVER +
base_vha->vp_idx;
-
/* Set the SG table size based on ISP type */
if (!IS_FWI2_CAPABLE(ha)) {
if (IS_QLA2100(ha))
@@ -2131,6 +2183,11 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
host->transportt = qla2xxx_transport_template;
sht->vendor_id = (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC);
+ /* Set target mode init */
+ mutex_init(&ha->tgt_mutex);
+ mutex_init(&ha->tgt_host_action_mutex);
+ qla_tgt_clear_mode(base_vha);
+
/* Set up the irqs */
ret = qla2x00_request_irqs(ha, rsp);
if (ret)
@@ -2252,6 +2309,8 @@ skip_dpc:
base_vha->flags.init_done = 1;
base_vha->flags.online = 1;
+ ha->isp_ops->enable_intrs(ha);
+
scsi_scan_host(host);
qla2x00_alloc_sysfs_attr(base_vha);
@@ -2270,6 +2329,13 @@ skip_dpc:
ha->flags.enable_64bit_addressing ? '+' : '-', base_vha->host_no,
ha->isp_ops->fw_version_str(base_vha, fw_str));
+#warning FIXME: Check for target mode enabled bit before calling qla_tgt_add_target()
+ qla_tgt_add_target(ha, base_vha);
+
+ mutex_lock(&qla_ha_list_mutex);
+ list_add_tail(&ha->ha_list_entry, &qla_ha_list);
+ mutex_unlock(&qla_ha_list_mutex);
+
return 0;
probe_init_failed:
@@ -2350,15 +2416,47 @@ qla2x00_shutdown(struct pci_dev *pdev)
}
static void
+qla2x00_stop_dpc_thread(scsi_qla_host_t *vha)
+{
+ struct task_struct *t = NULL;
+ struct qla_hw_data *ha = vha->hw;
+
+ spin_lock_irq(&ha->dpc_lock);
+ if (ha->dpc_thread != NULL) {
+ t = ha->dpc_thread;
+ /*
+ * qla2xxx_wake_dpc checks for ->dpc_thread
+ * so we need to zero it out.
+ */
+ ha->dpc_thread = NULL;
+ }
+ spin_unlock_irq(&ha->dpc_lock);
+
+ if (t != NULL)
+ kthread_stop(t);
+}
+
+static void
qla2x00_remove_one(struct pci_dev *pdev)
{
scsi_qla_host_t *base_vha, *vha;
- struct qla_hw_data *ha;
+ struct qla_hw_data *ha;
unsigned long flags;
base_vha = pci_get_drvdata(pdev);
ha = base_vha->hw;
+ mutex_lock(&qla_ha_list_mutex);
+ list_del(&ha->ha_list_entry);
+ mutex_unlock(&qla_ha_list_mutex);
+
+ ha->host_shutting_down = 1;
+#warning FIXME: Check for target mode enabled bit before calling qla_tgt_remove_target()
+ qla_tgt_remove_target(ha, base_vha);
+
+ /* Necessary to prevent races with it */
+ qla2x00_stop_dpc_thread(base_vha);
+
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vha, &ha->vp_list, list) {
atomic_inc(&vha->vref_count);
@@ -2455,17 +2553,7 @@ qla2x00_free_device(scsi_qla_host_t *vha)
if (vha->timer_active)
qla2x00_stop_timer(vha);
- /* Kill the kernel thread for this host */
- if (ha->dpc_thread) {
- struct task_struct *t = ha->dpc_thread;
-
- /*
- * qla2xxx_wake_dpc checks for ->dpc_thread
- * so we need to zero it out.
- */
- ha->dpc_thread = NULL;
- kthread_stop(t);
- }
+ qla2x00_stop_dpc_thread(vha);
qla25xx_delete_queues(vha);
@@ -2634,10 +2722,26 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
if (!ha->init_cb)
goto fail;
+ /*
+ * Setup qla_hw_data->tgt_vp_map
+ */
+ if (IS_FWI2_CAPABLE(ha)) {
+ ha->tgt_vp_map = kzalloc(sizeof(struct qla_tgt_vp_map) *
+ MAX_MULTI_ID_FABRIC, GFP_KERNEL);
+ if (!ha->tgt_vp_map)
+ goto fail_free_init_cb;
+
+ ha->atio_ring = dma_alloc_coherent(&ha->pdev->dev,
+ (ha->atio_q_length + 1) * sizeof(atio_t),
+ &ha->atio_dma, GFP_KERNEL);
+ if (!ha->atio_ring)
+ goto fail_free_vp_map;
+ }
+
ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
&ha->gid_list_dma, GFP_KERNEL);
if (!ha->gid_list)
- goto fail_free_init_cb;
+ goto fail_free_atio_ring;
ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
if (!ha->srb_mempool)
@@ -2828,6 +2932,14 @@ fail_free_gid_list:
ha->gid_list_dma);
ha->gid_list = NULL;
ha->gid_list_dma = 0;
+fail_free_atio_ring:
+ dma_free_coherent(&ha->pdev->dev, (ha->atio_q_length + 1) *
+ sizeof(response_t), ha->atio_ring, ha->atio_dma);
+ ha->atio_ring = NULL;
+ ha->atio_dma = 0;
+fail_free_vp_map:
+ kfree(ha->tgt_vp_map);
+ ha->tgt_vp_map = NULL;
fail_free_init_cb:
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, ha->init_cb,
ha->init_cb_dma);
@@ -2945,6 +3057,12 @@ qla2x00_mem_free(struct qla_hw_data *ha)
if (ha->ctx_mempool)
mempool_destroy(ha->ctx_mempool);
+ if (ha->atio_ring) {
+ dma_free_coherent(&ha->pdev->dev, (ha->atio_q_length + 1) * sizeof(atio_t),
+ ha->atio_ring, ha->atio_dma);
+ }
+ kfree(ha->tgt_vp_map);
+
if (ha->init_cb)
dma_free_coherent(&ha->pdev->dev, ha->init_cb_size,
ha->init_cb, ha->init_cb_dma);
@@ -2973,6 +3091,10 @@ qla2x00_mem_free(struct qla_hw_data *ha)
ha->gid_list = NULL;
ha->gid_list_dma = 0;
+
+ ha->atio_ring = NULL;
+ ha->atio_dma = 0;
+ ha->tgt_vp_map = NULL;
}
struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
@@ -4109,6 +4231,11 @@ qla2x00_module_init(void)
{
int ret = 0;
+ if (!qla_tgt_parse_ini_mode()) {
+ printk(KERN_ERR "qla_tgt_parse_ini_mode() failed\n");
+ return -EINVAL;
+ }
+
/* Allocate cache for SRBs. */
srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
SLAB_HWCACHE_ALIGN, NULL);
@@ -4118,6 +4245,13 @@ qla2x00_module_init(void)
return -ENOMEM;
}
+ /* Initialize target kmem_cache and mem_pools */
+ ret = qla_tgt_init();
+ if (ret < 0) {
+ kmem_cache_destroy(srb_cachep);
+ return ret;
+ }
+
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
if (ql2xextended_error_logging)
@@ -4127,6 +4261,7 @@ qla2x00_module_init(void)
fc_attach_transport(&qla2xxx_transport_functions);
if (!qla2xxx_transport_template) {
kmem_cache_destroy(srb_cachep);
+ qla_tgt_exit();
return -ENODEV;
}
@@ -4140,6 +4275,7 @@ qla2x00_module_init(void)
fc_attach_transport(&qla2xxx_transport_vport_functions);
if (!qla2xxx_transport_vport_template) {
kmem_cache_destroy(srb_cachep);
+ qla_tgt_exit();
fc_release_transport(qla2xxx_transport_template);
return -ENODEV;
}
@@ -4149,6 +4285,7 @@ qla2x00_module_init(void)
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
+ qla_tgt_exit();
fc_release_transport(qla2xxx_transport_template);
fc_release_transport(qla2xxx_transport_vport_template);
}
@@ -4165,6 +4302,7 @@ qla2x00_module_exit(void)
pci_unregister_driver(&qla2xxx_pci_driver);
qla2x00_release_firmware();
kmem_cache_destroy(srb_cachep);
+ qla_tgt_exit();
if (ctx_cachep)
kmem_cache_destroy(ctx_cachep);
fc_release_transport(qla2xxx_transport_template);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists