| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Mar 2011 14:54:56 +0900
From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@...esas.com>
To: gregkh@...e.de
Cc: linux-kernel@...r.kernel.org,
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@...esas.com>
Subject: [PATCH 1/2] tty: serial: Fix build on architecture that does not have ioport
Some CPU's do not have ioport. Therefore, these do not have inX/outX.
Because they define CONFIG_NO_IOPORT, These CPU's use this and do not
use inX/outX.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@...esas.com>
---
drivers/tty/serial/8250.c | 18 ++++++++++++++++--
drivers/tty/serial/8250_early.c | 4 ++++
drivers/tty/serial/serial_core.c | 4 ++++
3 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 3975df6..5c1f353 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -387,6 +387,7 @@ static inline int map_8250_out_reg(struct uart_port *p, int offset)
#endif
+#ifndef CONFIG_NO_IOPORT
static unsigned int hub6_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -400,6 +401,7 @@ static void hub6_serial_out(struct uart_port *p, int offset, int value)
outb(p->hub6 - 1 + offset, p->iobase);
outb(value, p->iobase + 1);
}
+#endif /* CONFIG_NO_IOPORT */
static unsigned int mem_serial_in(struct uart_port *p, int offset)
{
@@ -491,6 +493,7 @@ static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
dwapb_check_clear_ier(p, save_offset);
}
+#ifndef CONFIG_NO_IOPORT
static unsigned int io_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -502,17 +505,19 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
offset = map_8250_out_reg(p, offset) << p->regshift;
outb(value, p->iobase + offset);
}
+#endif
static void set_io_from_upio(struct uart_port *p)
{
struct uart_8250_port *up =
container_of(p, struct uart_8250_port, port);
switch (p->iotype) {
+#ifndef CONFIG_NO_IOPORT
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
p->serial_out = hub6_serial_out;
break;
-
+#endif
case UPIO_MEM:
p->serial_in = mem_serial_in;
p->serial_out = mem_serial_out;
@@ -545,8 +550,10 @@ static void set_io_from_upio(struct uart_port *p)
break;
default:
+#ifndef CONFIG_NO_IOPORT
p->serial_in = io_serial_in;
p->serial_out = io_serial_out;
+#endif
break;
}
/* Remember loaded iotype */
@@ -2539,11 +2546,13 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
}
break;
+#ifndef CONFIG_NO_IOPORT
case UPIO_HUB6:
case UPIO_PORT:
if (!request_region(up->port.iobase, size, "serial"))
ret = -EBUSY;
break;
+#endif
}
return ret;
}
@@ -2570,10 +2579,12 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
release_mem_region(up->port.mapbase, size);
break;
+#ifndef CONFIG_NO_IOPORT
case UPIO_HUB6:
case UPIO_PORT:
release_region(up->port.iobase, size);
break;
+#endif
}
}
@@ -2584,6 +2595,7 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up)
int ret = -EINVAL;
switch (up->port.iotype) {
+#ifndef CONFIG_NO_IOPORT
case UPIO_HUB6:
case UPIO_PORT:
start += up->port.iobase;
@@ -2593,7 +2605,7 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up)
ret = -EBUSY;
break;
}
-
+#endif
return ret;
}
@@ -2603,11 +2615,13 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
unsigned int size = 8 << up->port.regshift;
switch (up->port.iotype) {
+#ifndef CONFIG_NO_IOPORT
case UPIO_HUB6:
case UPIO_PORT:
release_region(up->port.iobase + offset, size);
break;
}
+#endif
}
static void serial8250_release_port(struct uart_port *port)
diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250_early.c
index eaafb98..5169f9e 100644
--- a/drivers/tty/serial/8250_early.c
+++ b/drivers/tty/serial/8250_early.c
@@ -55,8 +55,10 @@ static unsigned int __init serial_in(struct uart_port *port, int offset)
return readb(port->membase + offset);
case UPIO_MEM32:
return readl(port->membase + (offset << 2));
+#if defined(CONFIG_NO_IOPORT)
case UPIO_PORT:
return inb(port->iobase + offset);
+#endif
default:
return 0;
}
@@ -71,9 +73,11 @@ static void __init serial_out(struct uart_port *port, int offset, int value)
case UPIO_MEM32:
writel(value, port->membase + (offset << 2));
break;
+#if defined(CONFIG_NO_IOPORT)
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
+#endif
}
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 460a72d..eb7ceba 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2126,6 +2126,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
char address[64];
switch (port->iotype) {
+#ifndef CONFIG_NO_IOPORT
case UPIO_PORT:
snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase);
break;
@@ -2133,6 +2134,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
snprintf(address, sizeof(address),
"I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
break;
+#endif
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
@@ -2549,11 +2551,13 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
return 0;
switch (port1->iotype) {
+#ifndef CONFIG_NO_IOPORT
case UPIO_PORT:
return (port1->iobase == port2->iobase);
case UPIO_HUB6:
return (port1->iobase == port2->iobase) &&
(port1->hub6 == port2->hub6);
+#endif
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists