linux-kernel - Re: [regression] 2.6.39-rc1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Mon, 11 Apr 2011 21:33:44 +0200
From:	Maciej Rutecki <maciej.rutecki@...il.com>
To:	Mark Jackson <mpfj-list@...c.co.uk>
Cc:	linux-omap@...r.kernel.org, lkml <linux-kernel@...r.kernel.org>
Subject: Re: [regression] 2.6.39-rc1 - Beagleboard usbnet broken

I created a Bugzilla entry at 
https://bugzilla.kernel.org/show_bug.cgi?id=33092
for your bug report, please add your address to the CC list in there, thanks!

On poniedziałek, 4 kwietnia 2011 o 11:22:17 Mark Jackson wrote:
> Running 2.6.38 on my beagleboard, I can boot using nfs:-
> 
> regulator_init_complete: VDVI: incomplete constraints, leaving on
> regulator_init_complete: VDAC: incomplete constraints, leaving on
> usb 1-2: new high speed USB device using ehci-omap and address 2
> mmc0: host does not support reading read-only switch. assuming
> write-enable. mmc0: new high speed SDHC card at address 1234
> usb 1-2: New USB device found, idVendor=0424, idProduct=9514
> usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> mmcblk0: mmc0:1234 SA04G 3.67 GiB
> hub 1-2:1.0: USB hub found
>  mmcblk0: p1
> hub 1-2:1.0: 5 ports detected
> usb 1-2.1: new high speed USB device using ehci-omap and address 3
> usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00
> usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> smsc95xx v1.0.4
> smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1,
> smsc95xx USB 2.0 Ethernet, 9e:79:dd:1e:2e:5c
> Sending DHCP requests .
> usb0: link up, 100Mbps, full-duplex, lpa 0x45E1
> ., OK
> IP-Config: Got DHCP answer from 10.0.0.1, my address is 10.0.0.113
> IP-Config: Complete:
>      device=usb0, addr=10.0.0.113, mask=255.255.0.0, gw=10.0.0.1,
>      host=10.0.0.113, domain=, nis-domain=(none),
>      bootserver=10.0.0.1, rootserver=10.0.0.100, rootpath=
> VFS: Mounted root (nfs filesystem) on device 0:10.
> .... etc ....
> 
> I have just tried out 2.6.39-rc1, and the usbnet is no longer detected:-
> 
> regulator_init_complete: VDVI: incomplete constraints, leaving on
> regulator_init_complete: VDAC: incomplete constraints, leaving on
> mmc0: host does not support reading read-only switch. assuming
> write-enable. mmc0: new high speed SDHC card at address 1234
> mmcblk0: mmc0:1234 SA04G 3.67 GiB
>  mmcblk0: p1
> VFS: Unable to mount root fs via NFS, trying floppy.
> VFS: Cannot open root device "nfs" or unknown-block(2,0)
> Please append a correct "root=" boot option; here are the available
> partitions: b300         3858432 mmcblk0  driver: mmcblk
>   b301           72261 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(2,0)
> 
> I have tried a git bisect, but it seems to blame the wrong thing:-
> 
> 087809fce28f50098d9c3ef1a6865c722f23afd2 is the first bad commit
> commit 087809fce28f50098d9c3ef1a6865c722f23afd2
> Author: Jamie Iles <jamie@...ieiles.com>
> Date:   Fri Jan 21 14:11:52 2011 +0000
> 
>     dmaengine/dw_dmac: don't scan descriptors if no xfers in progress
> 
>     Some hardware (picoChip picoXCell in particular) sometimes has
>     the block transfer complete bit being set for a channel after the
>     whole transfer has completed. If we don't have any transfers in the
>     active list then don't bother to scan the descriptors. This often
>     happens in normal operation and doesn't require the channel to be
>     reset.
> 
>     v2: cleanup whitespace
> 
>     Signed-off-by: Jamie Iles <jamie.iles@...ochip.com>
>     Signed-off-by: Dan Williams <dan.j.williams@...el.com>
> 
> :040000 040000 d0dac7f65b52fb1849f77056740d84d06530629f
> :211910a820dad07f0439410cc849c34909a62c2f M
> 
> drivers
> 
> I have attached my .config.  Can anyone help ?
> 
> Cheers
> Mark

-- 
Maciej Rutecki
http://www.maciek.unixy.pl
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/