| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 12 May 2011 17:16:04 +0900
From: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To: Mauro Carvalho Chehab <mchehab@...radead.org>,
Hans Verkuil <hverkuil@...all.nl>,
Guennadi Liakhovetski <g.liakhovetski@....de>,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
kok.howg.ewe@...el.com, toshiharu-linux@....okisemi.com,
Tomoya MORINAGA <tomoya-linux@....okisemi.com>
Subject: [PATCH] Add VIDEO IN driver for OKI SEMICONDUCTOR ML7213/ML7223 IOHs
This patch is for Video IN driver of OKI SEMICONDUCTOR ML7213/ML7223 IOHs
(Input/Output Hub).
These ML7213/ML7223 IOHs are companion chip for Intel Atom E6xx series.
ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is for
MP(Media Phone) use.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
drivers/media/video/Kconfig | 79 +
drivers/media/video/Makefile | 15 +
drivers/media/video/ioh_video_in.c | 4704 +++++++++++++++++++++++++
drivers/media/video/ioh_video_in_main.h | 1058 ++++++
drivers/media/video/ioh_video_in_ml86v76651.c | 620 ++++
drivers/media/video/ioh_video_in_ncm13j.c | 584 +++
drivers/media/video/ioh_video_in_ov7620.c | 637 ++++
drivers/media/video/ioh_video_in_ov9653.c | 818 +++++
8 files changed, 8515 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/video/ioh_video_in.c
create mode 100644 drivers/media/video/ioh_video_in_main.h
create mode 100644 drivers/media/video/ioh_video_in_ml86v76651.c
create mode 100644 drivers/media/video/ioh_video_in_ncm13j.c
create mode 100644 drivers/media/video/ioh_video_in_ov7620.c
create mode 100644 drivers/media/video/ioh_video_in_ov9653.c
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 00f51dd..11a96a8 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -928,6 +928,85 @@ config VIDEO_MX2
Interface
+config IOH_VIDEOIN
+ tristate "OKI SEMICONDUCTOR ML7213/ML7223 IOH VIDEO IN"
+ depends on PCI && DMADEVICES
+ select PCH_DMA
+ help
+ This driver is for Video IN of OKI SEMICONDUCTOR ML7213/ML7223 IOHs
+ (Input/Output Hub).
+ These ML7213/ML7223 IOHs are companion chip for Intel Atom E6xx
+ series.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
+ for MP(Media Phone) use.
+
+config IOH_VIDEO_DEVICE_SELECT
+ boolean
+
+choice
+ prompt "Select IOH VIDEO IN Device"
+ depends on IOH_VIDEOIN
+ help
+ This is a selection of used device of the IOH VIDEO.
+
+config IOH_ML86V76651
+ boolean "IOH VIDEO IN(ML86V76651)"
+ depends on PCI && IOH_VIDEOIN && I2C_EG20T
+ help
+ If you say yes to this option, support will be included for the
+ IOH VIDEO ON Driver(ML86V76651).
+
+config IOH_ML86V76653
+ boolean "IOH VIDEO IN(ML86V76653)"
+ depends on PCI && IOH_VIDEOIN && I2C_EG20T
+ help
+ If you say yes to this option, support will be included for the
+ IOH VIDEO ON Driver(ML86V76653).
+
+config IOH_OV7620
+ boolean "IOH VIDEO IN(OV7620)"
+ depends on PCI && IOH_VIDEOIN && I2C_EG20T
+ help
+ If you say yes to this option, support will be included for the
+ IOH VIDEO ON Driver(OV7620).
+
+config IOH_OV9653
+ boolean "IOH VIDEO IN(OV9653)"
+ depends on PCI && IOH_VIDEOIN && I2C_EG20T
+ help
+ If you say yes to this option, support will be included for the
+ IOH VIDEO ON Driver(OV9653).
+
+config IOH_NCM13J
+ boolean "IOH VIDEO IN(NCM13-J)"
+ depends on PCI && IOH_VIDEOIN && I2C_EG20T
+ help
+ If you say yes to this option, support will be included for the
+ IOH VIDEO ON Driver(NCM13-J).
+endchoice
+
+config IOH_VIDEO_FRAMEWORK_SELECT
+ boolean
+
+choice
+ prompt "Select IOH VIDEO IN Videobuf Freamework"
+ depends on IOH_VIDEOIN
+ help
+ This is a selection of used the method of video buffer framework.
+
+config IOH_VIDEO_IN_VMALLOC
+ boolean "VMALLOC Framework"
+ select VIDEOBUF_VMALLOC
+ help
+ If you say yes to this option, VMALLOC framework is used.
+
+config IOH_VIDEO_IN_DMA_CONTIG
+ boolean "DMA-CONTIG Framework"
+ select VIDEOBUF_DMA_CONTIG
+ help
+ If you say yes to this option, DMA-CONTIG framework is used.
+endchoice
+
#
# USB Multimedia device configuration
#
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index ace5d8b..147aec0 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -181,6 +181,21 @@ obj-y += davinci/
obj-$(CONFIG_ARCH_OMAP) += omap/
+obj-$(CONFIG_IOH_ML86V76651) += ioh_video_in_ml86v76651.o
+obj-$(CONFIG_IOH_ML86V76653) += ioh_video_in_ml86v76651.o
+obj-$(CONFIG_IOH_OV7620) += ioh_video_in_ov7620.o
+obj-$(CONFIG_IOH_OV9653) += ioh_video_in_ov9653.o
+obj-$(CONFIG_IOH_NCM13J) += ioh_video_in_ncm13j.o
+obj-$(CONFIG_IOH_VIDEOIN) += ioh_video_in.o
+ifeq ($(CONFIG_IOH_ML86V76653),y)
+EXTRA_CFLAGS += -DIOH_VIDEO_IN_ML86V76653
+endif
+ifeq ($(CONFIG_IOH_VIDEO_IN_DMA_CONTIG),y)
+EXTRA_CFLAGS += -DIOH_VIDEO_IN_DMA_CONTIG
+endif
+
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/common/tuners
+EXTRA_CFLAGS += -Idrivers/i2c/busses/
diff --git a/drivers/media/video/ioh_video_in.c b/drivers/media/video/ioh_video_in.c
new file mode 100644
index 0000000..1bbe728
--- /dev/null
+++ b/drivers/media/video/ioh_video_in.c
@@ -0,0 +1,4704 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/pch_dma.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#include <media/videobuf-dma-contig.h>
+#else
+#include <media/videobuf-vmalloc.h>
+#endif
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+
+#include "ioh_video_in_main.h"
+
+#define IOH_VIDEOIN_THREAD_NAME "ioh_videoin_thread"
+
+#define IOH_VIN_MAJOR_VERSION 1
+#define IOH_VIN_MINOR_VERSION 0
+#define IOH_VIN_RELEASE 0
+#define IOH_VIN_VERSION \
+ KERNEL_VERSION(IOH_VIN_MAJOR_VERSION, IOH_VIN_MINOR_VERSION, \
+ IOH_VIN_RELEASE)
+
+#define OV7620_ADDR (0x42 >> 1)
+#define OV9653_ADDR (0x60 >> 1)
+#define ML86V76651_ADDR (0x80 >> 1)
+#define NCM13J_ADDR (0xBA >> 1)
+
+#define ALLOC_NUMBER (3)
+#define ALLOC_ORDER (10)/* (9) */
+
+/* Macros for bit positions. */
+#define IOH_BIT_0 (0)
+#define IOH_BIT_1 (1)
+#define IOH_BIT_2 (2)
+#define IOH_BIT_3 (3)
+#define IOH_BIT_4 (4)
+#define IOH_BIT_5 (5)
+#define IOH_BIT_6 (6)
+#define IOH_BIT_7 (7)
+#define IOH_BIT_8 (8)
+#define IOH_BIT_9 (9)
+#define IOH_BIT_10 (10)
+#define IOH_BIT_11 (11)
+#define IOH_BIT_12 (12)
+#define IOH_BIT_13 (13)
+#define IOH_BIT_14 (14)
+#define IOH_BIT_15 (15)
+
+/* Macros for register offset. */
+#define IOH_VIDEO_IN_VICTRL1 (0x0000U)
+
+#define IOH_VIDEO_IN_VICTRL2 (0x0004U)
+ #define IN2S (IOH_BIT_6)
+
+#define IOH_VIDEO_IN_VOCTRL1 (0x0008U)
+ #define OUT2S (IOH_BIT_8)
+ #define LDSEL (IOH_BIT_6)
+ #define ORGBSEL (IOH_BIT_1)
+
+#define IOH_VIDEO_IN_VOCTRL2 (0x000CU)
+ #define O422SEL (IOH_BIT_8)
+ #define CBON (IOH_BIT_7)
+ #define BBON (IOH_BIT_6)
+ #define SBON (IOH_BIT_4)
+ #define RGBLEV (IOH_BIT_3)
+
+#define IOH_VIDEO_IN_BLNKTIM (0x0018U)
+ #define CNTCTL (IOH_BIT_7)
+
+#define IOH_VIDEO_IN_LUMLEV (0x0020U)
+ #define NOSIG (IOH_BIT_7)
+
+#define IOH_VIDEO_IN_GGAIN (0x0024U)
+
+#define IOH_VIDEO_IN_BGAIN (0x0028U)
+
+#define IOH_VIDEO_IN_RGAIN (0x002CU)
+
+#define IOH_VIDEO_IN_THMOD1 (0x00F8U)
+
+#define IOH_VIDEO_IN_THMOD2 (0x00FCU)
+
+#define IOH_VIDEO_IN_INTENB (0x0100U)
+
+#define IOH_VIDEO_IN_INTSTS (0x0104U)
+ #define INTBITS (0x7)
+ #define OFINTSTS (0x4)
+ #define HSINTSTS (0x2)
+ #define VSINTSTS (0x1)
+
+#define IOH_VIDEO_IN_VDATA (0x1000U)
+
+#define IOH_VIDEO_IN_RESET (0x1ffcU)
+ #define ASSERT_RESET (0x0001U)
+ #define DE_ASSERT_RESET (0x0000U)
+
+#define DESC_SIZE (1028 * MAXIMUM_FRAME_BUFFERS)
+
+#define VSYNC_SYNC 0
+#define VSYNC_NOT_SYNC 1
+
+#define DISABLE 0
+#define ENABLE 1
+
+#define LIKELY(x) likely(x)
+#define UNLIKELY(x) unlikely(x)
+
+struct reg_intenb {
+ u8 drevsem;
+ u8 dmarenb;
+ u8 ofintenb;
+ u8 hsintenb;
+ u8 vsintenb;
+};
+
+struct ioh_video_in_settings {
+ /**< The current input data format. */
+ struct ioh_video_in_input_format current_input_format;
+
+ /**< The current frame size. */
+ struct ioh_video_in_frame_size current_frame_size;
+
+ /**< The current output data format. */
+ struct ioh_video_in_output_format current_output_format;
+
+ /**< The current scan mode conversion method. */
+ enum ioh_video_in_scan_mode_method current_scan_mode_method;
+
+ /**< The current luminance settings. */
+ struct ioh_video_in_luminance_settings current_luminance_settings;
+
+ /**< The current RGB gain settings. */
+ struct ioh_video_in_rgb_gain_settings current_rgb_gain_settings;
+
+ /**< The current blanking time settings. */
+ struct ioh_video_in_blank_tim_settings current_blank_tim_settings;
+
+ /**< The current Blue background settings. */
+ enum ioh_video_in_bb_mode current_bb_mode;
+
+ /**< The current Color bar settings. */
+ struct ioh_video_in_cb_settings current_cb_settings;
+
+ /**< The current interrupt settings. */
+ /* Used only during suspension and resume operation. */
+ struct reg_intenb current_interrupt_settings;
+};
+
+enum ioh_type {
+ ML7213_IOH,
+ ML7223_IOH,
+};
+
+struct BT656_device {
+ /* The base (remapped) address of the video device. */
+ void __iomem *base_address;
+ /* The physical address of the video device. */
+ u32 physical_address;
+
+ /* The pci_dev structure reference of the device. */
+ struct pci_dev *p_device;
+ /* The IRQ line reserved for the device. */
+ int irq;
+
+ /* The DMA channel obtained for capturing data. */
+ struct dma_async_tx_descriptor *desc_dma;
+ struct pch_dma_slave param_dma;
+ struct dma_chan *chan_dma;
+ struct scatterlist *sg_dma; /* sg_tx_p */
+ int nent;
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ /* Wait queue variable for the thread sleep operation. */
+ wait_queue_head_t thread_sleep_queue;
+ wait_queue_head_t vsync_wait_queue;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ /* Information of Video Frame Buffers. */
+ struct ioh_video_in_frame_buffer_info frame_buffer_info;
+
+ /* Video Frame Buffers. */
+ struct ioh_video_in_frame_buffers bufs;
+
+ /* Read Buffer. (The current frame buffer that can be read.) */
+ struct ioh_video_in_frame_buffer *read_buffer;
+
+ /* Wait queue variable for the read operation. */
+ wait_queue_head_t read_wait_queue;
+ /* Wait queue variable for the thread sleep operation. */
+ wait_queue_head_t thread_sleep_queue;
+ wait_queue_head_t vsync_wait_queue;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* Lock variables. */
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ spinlock_t dev_lock;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ spinlock_t read_buffer_lock;
+ spinlock_t dev_lock;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* Flag variables. */
+ u8 suspend_flag; /* for denoting the suspend action. */
+ u8 open_flag; /* for denoting the open action. */
+ u8 vsync_waiting_flag;
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ u8 read_wait_flag; /* for denoting the read wait process. */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+ u8 thread_sleep_flag; /* for denoting the thread sleep process. */
+ u8 thread_exit_flag; /* for denoting the thread exit process. */
+ u8 overflow_flag; /* for denoting the overflow interrupt. */
+ s8 dma_flag; /* for denoting the DMA process completion. */
+
+ struct reg_intenb intenb;
+
+ /* current video setting details of the device. */
+ struct ioh_video_in_settings video_settings;
+
+ /* Used in thread */
+
+ /* The number of frame skip */
+ u32 frame_skip_num;
+ /* DMA buffer virtual address. */
+ void *dma_buffer_virt[MAXIMUM_FRAME_BUFFERS];
+ /* DMA buffer physical address. */
+ dma_addr_t dma_buffer_phy[MAXIMUM_FRAME_BUFFERS];
+
+ struct scatterlist *sg_dma_list[MAXIMUM_FRAME_BUFFERS];
+ int ioh_type; /* ML7213 or ML7223 */
+};
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#define ioh_video_in_lock_buffer(lock_variable) spin_lock(lock_variable)
+#define ioh_video_in_unlock_buffer(lock_variable) spin_unlock(lock_variable)
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+struct ioh_vin_fmt {
+ char *name;
+ u32 fourcc; /* v4l2 format id */
+ int depth;
+ enum v4l2_mbus_pixelcode mbus_code;
+};
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+enum ioh_video_in_vidq_status {
+ IOH_VIDEO_IN_VIDQ_IDLE,
+ IOH_VIDEO_IN_VIDQ_INITIALISING,
+ IOH_VIDEO_IN_VIDQ_RUNNING,
+};
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+/* buffer for one video frame */
+struct ioh_vin_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ struct ioh_vin_fmt *fmt;
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ u32 channel;
+ u32 frame_index;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+};
+
+struct ioh_vin_dev {
+ struct v4l2_device v4l2_dev;
+
+ spinlock_t slock;
+ struct mutex mutex;
+
+ int users;
+
+ /* various device info */
+ struct video_device *vfd;
+
+ struct list_head vidq_active;
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ struct ioh_vin_buffer *active_frm;
+ enum ioh_video_in_vidq_status vidq_status;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+ /* Control 'registers' */
+ struct BT656_device *video_in_dev;
+
+ struct v4l2_subdev *sensor;
+
+};
+
+struct ioh_vin_fh {
+ struct ioh_vin_dev *dev;
+
+ /* video capture */
+ struct ioh_vin_fmt *fmt;
+ struct v4l2_pix_format pix_format;
+ struct videobuf_queue vb_vidq;
+
+ enum v4l2_buf_type type;
+};
+
+#define IOH_VIN_DRV_NAME "ioh_videoin"
+#define MAX_DEVICE_SUPPORTED (1)
+#define PCI_VENDOR_ID_IOH (0x10DB)
+#define PCI_DEVICE_ID_IVI_VIDEOIN (0x802A)
+#define PCI_DEVICE_ID_MP_VIDEOIN (0x8011)
+
+#define SET_BIT(value, bit) ((value) |= ((u32)0x1 << (bit)))
+#define RESET_BIT(value, bit) ((value) &= ~((u32)0x1 << (bit)))
+#define RESET_BIT_RANGE(value, lbit, hbit) \
+((value) &= ~((((u32)2 << ((hbit) - (lbit) + 1)) - 1) << (lbit)))
+
+/* -- */
+#define ioh_err(device, fmt, arg...) \
+ dev_err(&(device)->p_device->dev, fmt, ##arg);
+#define ioh_warn(device, fmt, arg...) \
+ dev_warn(&(device)->p_device->dev, fmt, ##arg);
+#define ioh_info(device, fmt, arg...) \
+ dev_info(&(device)->p_device->dev, fmt, ##arg);
+#define ioh_dbg(device, fmt, arg...) \
+ dev_dbg(&(device)->p_device->dev, fmt, ##arg);
+/* -- */
+
+#define SLEEP_DELAY (500U)
+
+static unsigned video_nr = -1;
+module_param(video_nr, uint, 0644);
+MODULE_PARM_DESC(video_nr, "videoX number, -1 is autodetect");
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#define N_FRAME_BUF 2
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#define MIN_N_FRAME_BUF 3
+#define MAX_N_FRAME_BUF 5
+static unsigned n_frame_buf = 3;
+module_param(n_frame_buf, uint, 0644);
+MODULE_PARM_DESC(n_frame_buf, "the number of farme buffer to allocate[3-5].");
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+static unsigned int vid_limit = 16;
+
+/* prototype */
+static void ioh_videoin_thread_tick(struct ioh_vin_dev *dev);
+static int ioh_video_in_open(struct ioh_vin_dev *dev);
+static int ioh_video_in_close(struct ioh_vin_dev *dev);
+
+static long ioh_video_in_ioctl(struct file *p_file, void *priv,
+ int command, void *param);
+
+#define sensor_call(dev, o, f, args...) \
+ v4l2_subdev_call(dev->sensor, o, f, ##args)
+
+static struct ioh_vin_fmt formats[] = {
+ {
+ .name = "4:2:2, packed, UYVY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,
+ },
+};
+
+/* ---- HAL ---- */
+
+void write_intenb(struct BT656_device *device)
+{
+ void __iomem *addr;
+ u32 data;
+
+ addr = device->base_address + IOH_VIDEO_IN_INTENB;
+ data = device->intenb.drevsem << 5
+ | device->intenb.dmarenb << 4
+ | device->intenb.ofintenb << 2
+ | device->intenb.hsintenb << 1
+ | device->intenb.vsintenb << 0;
+
+ iowrite32(data, addr);
+
+ ioh_dbg(device, "In write_intenb -> 0x%04x write", data);
+}
+
+void ioh_video_in_wait_vsync(struct BT656_device *device)
+{
+ device->vsync_waiting_flag = true;
+
+ ioh_dbg(device, "In %s waiting", __func__);
+
+ wait_event_interruptible(device->vsync_wait_queue,
+ false == device->vsync_waiting_flag);
+
+ ioh_dbg(device, "In %s wake_up", __func__);
+
+ return;
+}
+
+struct ioh_video_in_input_settings {
+ /* Input format. */
+ enum ioh_video_in_input_data_format format;
+ /* VICTRL1 register value. */
+ u32 victrl1;
+ /* VICTRL2 register value. */
+ u32 victrl2;
+ /* Frame size. */
+ struct ioh_video_in_frame_size frame_size;
+};
+
+static const struct ioh_video_in_input_settings ioh_input_settings[] = {
+/* <Input Format> <VICTRL1> <VICTRL2> <X> <Y> <Pitch> */
+ {NT_SQPX_ITU_R_BT_656_4_8BIT,
+ 0x00000001, 0x00000000, {640, 480, 640 * 2} },
+ {NT_SQPX_ITU_R_BT_656_4_10BIT,
+ 0x00000001, 0x00000200, {640, 480, 640 * 4} },
+ {NT_SQPX_YCBCR_422_8BIT,
+ 0x00000009, 0x00000000, {640, 480, 640 * 4} },
+ {NT_SQPX_YCBCR_422_10BIT,
+ 0x00000009, 0x00000200, {640, 480, 640 * 4} },
+
+ {NT_BT601_ITU_R_BT_656_4_8BIT,
+ 0x00000000, 0x00000000, {720, 480, 768 * 2} },
+ {NT_BT601_ITU_R_BT_656_4_10BIT,
+ 0x00000000, 0x00000200, {720, 480, 768 * 4} },
+ {NT_BT601_YCBCR_422_8BIT,
+ 0x00000008, 0x00000000, {720, 480, 768 * 4} },
+ {NT_BT601_YCBCR_422_10BIT,
+ 0x00000008, 0x00000200, {720, 480, 768 * 4} },
+
+ {NT_RAW_8BIT, 0x00000000, 0x00000100, {640, 480, 640 * 2} },
+ {NT_RAW_10BIT, 0x00000000, 0x00000300, {640, 480, 640 * 2} },
+ {NT_RAW_12BIT, 0x00000000, 0x00000500, {640, 480, 640 * 2} },
+};
+
+#define DEFAULT_IP_TRANS_SETTINGS (LINE_INTERPOLATION)
+#define DEFAULT_BB_SETTINGS (BB_OUTPUT_OFF)
+
+static const struct ioh_video_in_input_format default_input_data_format = {
+ NT_SQPX_ITU_R_BT_656_4_8BIT,
+ OFFSET_BINARY_FORMAT,
+};
+
+static const struct ioh_video_in_output_format default_output_data_format = {
+ YCBCR_422_8BIT,
+ OFFSET_BINARY_FORMAT,
+ BT601_LUMINANCE_RANGE,
+ RGB_FULL_SCALE_MODE,
+};
+
+static const struct ioh_video_in_luminance_settings
+default_luminance_settings = {
+ NOSIG_NORMAL_MODE,
+ LUMLEV_78_PERCENT,
+};
+
+static const struct ioh_video_in_rgb_gain_settings
+default_rgb_gain_settings = {
+ (unsigned char)0x00,
+ (unsigned char)0x00,
+ (unsigned char)0x00,
+};
+
+static const struct ioh_video_in_blank_tim_settings
+default_blank_tim_settings = {
+ CNTCTL_STANDARD_SIGNAL,
+ BLKADJ_0_PIXEL,
+};
+
+static const struct ioh_video_in_cb_settings default_cb_settings = {
+ CB_OUTPUT_OFF,
+ CB_OUTLEV_25_PERCENT,
+};
+
+static const struct ioh_video_in_input_format invalid_input_format = {
+ INVALID_INPUT_DATA_FORMAT,
+ INVALID_NUMERICAL_FORMAT,
+};
+
+static const struct ioh_video_in_frame_size invalid_frame_size = {
+ 0,
+ 0,
+ 0,
+};
+
+static const struct ioh_video_in_output_format invalid_output_format = {
+ INVALID_OUTPUT_DATA_FORMAT,
+ INVALID_NUMERICAL_FORMAT,
+ INVALID_LUMINANCE_RANGE,
+ INVALID_RGB_GAIN_LEVEL,
+};
+
+#define INVALID_IP_TRANS_MODE (INVALID_SCAN_MODE_METHOD)
+
+static const struct ioh_video_in_luminance_settings invalid_luminance_level = {
+ INVALID_LUMINANCE_NOSIG,
+ INVALID_LUMINANCE_LUMLEV,
+};
+
+static const struct ioh_video_in_blank_tim_settings invalid_blank_tim = {
+ INVALID_BLANK_TIM_CNTCTL,
+ INVALID_BLANK_TIM_BLKADJ,
+};
+
+#define INVALID_BB_MODE (INVALID_BB_MODE)
+
+static const struct ioh_video_in_cb_settings invalid_cb_settings = {
+ INVALID_CB_MODE,
+ INVALID_CB_OUTLEV,
+};
+
+#define MAXIMUM_INPUT_FORMAT (sizeof(ioh_input_settings)/(sizeof(struct \
+ioh_video_in_input_settings)))
+
+static s32
+ioh_video_in_set_input_format(struct BT656_device *device,
+ struct ioh_video_in_input_format input_format)
+{
+ u32 victrl2;
+ u32 counter;
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Obtaining the base address. */
+ base_address = device->base_address;
+
+ /* Checking for the input data format. */
+ for (counter = 0; counter < MAXIMUM_INPUT_FORMAT; counter++) {
+ if (input_format.format == ioh_input_settings[counter].format)
+ break;
+ }
+
+ /* Data format valid. */
+ if (counter >= MAXIMUM_INPUT_FORMAT) {
+ ioh_err(device, "In %s -> "
+ "Invalid input data format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+
+ goto out;
+ }
+
+ /* Obtaining the value of the VICTRL2 register. */
+ victrl2 = ioh_input_settings[counter].victrl2;
+
+ /* Setting IN2S bit of VICTRL2 */
+ switch (input_format.numerical_format) {
+ case OFFSET_BINARY_FORMAT:
+ RESET_BIT(victrl2, IN2S);
+ break;
+
+ case COMPLEMENTARY_FORMAT_OF_2:
+ SET_BIT(victrl2, IN2S);
+ break;
+
+ case DONT_CARE_NUMERICAL_FORMAT:
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid numerical format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Setting the VICTRL1 and VICTRL2 regsiter. */
+ spin_lock(&device->dev_lock);
+
+ iowrite32((ioh_input_settings[counter].victrl1),
+ (base_address + IOH_VIDEO_IN_VICTRL1));
+
+ iowrite32((victrl2), (base_address + IOH_VIDEO_IN_VICTRL2));
+
+ /* Confirming the write operation. */
+ ioh_dbg(device, "In %s -> victrl1 = %08x victrl2 = %08x",
+ __func__, ioh_input_settings[counter].victrl1, victrl2);
+
+ if (((ioh_input_settings[counter].victrl1) ==
+ (ioread32(base_address + IOH_VIDEO_IN_VICTRL1)))
+ && (victrl2 == (ioread32(base_address + IOH_VIDEO_IN_VICTRL2)))) {
+
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.current_input_format = input_format;
+ device->video_settings.current_frame_size =
+ ioh_input_settings[counter].frame_size;
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.current_input_format =
+ invalid_input_format;
+
+ device->video_settings.current_frame_size =
+ invalid_frame_size;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+ spin_unlock(&device->dev_lock);
+
+out:
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_input_format
+ioh_video_in_get_input_format(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_input_format;
+}
+
+static s32
+ioh_video_in_set_output_format(struct BT656_device *device,
+ struct ioh_video_in_output_format output_format)
+{
+ u32 voctrl1;
+ u32 voctrl2;
+ void __iomem *base_address;
+ struct ioh_video_in_input_format input_format;
+ s32 retval = IOH_VIDEOIN_FAIL;
+
+ /* Obtaining the device base address for read and write operations. */
+ base_address = device->base_address;
+
+ /* Obtaining the currently set input format. */
+ input_format = device->video_settings.current_input_format;
+
+ spin_lock(&device->dev_lock);
+
+ /* Reading the VOCTRL1 and VOCTRL2 register value for updation. */
+ voctrl1 = ioread32(base_address + IOH_VIDEO_IN_VOCTRL1);
+ voctrl2 = ioread32(base_address + IOH_VIDEO_IN_VOCTRL2);
+
+ /* Setting the register values depending on the output data format. */
+ switch (output_format.format) {
+ case YCBCR_422_8BIT:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_8BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_8BIT)
+ || (input_format.format == NT_RAW_8BIT)) {
+ /* NT_RAW_8BIT condition is for input setting is raw &
+ output setting is 422-8bit. */
+
+ /* Clearing bit1(ORGBSEL) */
+ RESET_BIT(voctrl1, ORGBSEL);
+
+ /* Setting bit8 (O422SEL) */
+ SET_BIT(voctrl2, O422SEL);
+
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case YCBCR_422_10BIT:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_10BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_10BIT)) {
+ /* Clearing bit1(ORGBSEL) */
+ RESET_BIT(voctrl1, ORGBSEL);
+
+ /* Setting bit8 (O422SEL) */
+ SET_BIT(voctrl2, O422SEL);
+
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bit9 (OBITSEL) */
+ SET_BIT(voctrl1, IOH_BIT_9);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case YCBCR_444_8BIT:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_8BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_8BIT)) {
+ /* Clearing bit1(ORGBSEL) */
+ RESET_BIT(voctrl1, ORGBSEL);
+
+ /* Resetting bit8 (O422SEL) */
+ RESET_BIT(voctrl2, O422SEL);
+
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case YCBCR_444_10BIT:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_10BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_10BIT)) {
+ /* Clearing bit1(ORGBSEL) */
+ RESET_BIT(voctrl1, ORGBSEL);
+
+ /* Resetting bit8 (O422SEL) */
+ RESET_BIT(voctrl2, O422SEL);
+
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bit9 (OBITSEL) */
+ SET_BIT(voctrl1, IOH_BIT_9);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case RGB888:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_8BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_8BIT)
+ || (input_format.format == NT_SQPX_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_10BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_10BIT)) {
+
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bit1(ORGBSEL) */
+ SET_BIT(voctrl1, ORGBSEL);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case RGB666:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_8BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_8BIT)
+ || (input_format.format == NT_SQPX_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_10BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_10BIT)) {
+
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bits9(OBITSEL) */
+ SET_BIT(voctrl1, IOH_BIT_9);
+
+ /* Setting bit1(ORGBSEL) */
+ SET_BIT(voctrl1, ORGBSEL);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case RGB565:
+ if ((input_format.format == NT_SQPX_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_8BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_8BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_8BIT)
+ || (input_format.format == NT_SQPX_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_BT601_ITU_R_BT_656_4_10BIT)
+ || (input_format.format == NT_SQPX_YCBCR_422_10BIT)
+ || (input_format.format == NT_BT601_YCBCR_422_10BIT)) {
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bits10(OBITSEL) */
+ SET_BIT(voctrl1, IOH_BIT_10);
+
+ /* Setting bit1(ORGBSEL) */
+ SET_BIT(voctrl1, ORGBSEL);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case RAW_8BIT:
+ if (input_format.format == NT_RAW_8BIT) {
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case RAW_10BIT:
+ if (input_format.format == NT_RAW_10BIT) {
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bits9(OBITSEL) */
+ SET_BIT(voctrl1, IOH_BIT_9);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ case RAW_12BIT:
+ if (input_format.format == NT_RAW_12BIT) {
+ /* Clearing bits9-10(OBITSEL) */
+ RESET_BIT_RANGE(voctrl1, IOH_BIT_9, IOH_BIT_10);
+
+ /* Setting bits10(OBITSEL) */
+ SET_BIT(voctrl1, IOH_BIT_10);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ if (IOH_VIDEOIN_FAIL == retval) {
+ ioh_err(device, "In %s -> "
+ "Invalid Output Data Format", __func__);
+ goto out;
+ }
+
+ /* Checking and setting for output numerical format. */
+ switch (output_format.numerical_format) {
+ case OFFSET_BINARY_FORMAT:
+ /* Clearing bit8(O2S) */
+ RESET_BIT(voctrl1, OUT2S);
+ break;
+
+ case COMPLEMENTARY_FORMAT_OF_2:
+ /* Setting bit8 (O2S) */
+ SET_BIT(voctrl1, OUT2S);
+ break;
+
+ case DONT_CARE_NUMERICAL_FORMAT:
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid output numerical format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Clearing bit4 SBON */
+ RESET_BIT(voctrl2, SBON);
+
+ /* Checking and setting for output luminance range. */
+ switch (output_format.luminance_range) {
+ case BT601_LUMINANCE_RANGE:
+ voctrl2 |= BT601_LUMINANCE_RANGE;
+ break;
+
+ case EXTENDENDED_LUMINANCE_RANGE:
+ voctrl2 |= EXTENDENDED_LUMINANCE_RANGE;
+ break;
+
+ case DONT_CARE_LUMINANNCE_RANGE:
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid output luminance range format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Clearing bit3 RGBLEV */
+ RESET_BIT(voctrl2, RGBLEV);
+
+ /* Checking and setting for RGB Gain level. */
+ switch (output_format.rgb_gain_level) {
+ case RGB_FULL_SCALE_MODE:
+ voctrl2 |= RGB_FULL_SCALE_MODE;
+ break;
+
+ case RGB_BT601_MODE:
+ voctrl2 |= RGB_BT601_MODE;
+ break;
+
+ case DONT_CARE_RGBLEV:
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid output rgb gain level format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Updating the VOCTRL1 and VOCTRL2 registers. */
+ iowrite32(voctrl1, (base_address + IOH_VIDEO_IN_VOCTRL1));
+ iowrite32(voctrl2, (base_address + IOH_VIDEO_IN_VOCTRL2));
+
+ /* Confirming the register write. */
+ ioh_dbg(device, "In %s -> voctrl1 = %08x voctrl2 = %08x",
+ __func__, voctrl1, voctrl2);
+
+ if ((voctrl1 == ioread32(base_address + IOH_VIDEO_IN_VOCTRL1))
+ && (voctrl2 == ioread32(base_address + IOH_VIDEO_IN_VOCTRL2))) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.current_output_format = output_format;
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.current_output_format =
+ invalid_output_format;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+out:
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_output_format
+ioh_video_in_get_output_format(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_output_format;
+}
+
+static s32
+ioh_video_in_set_size(struct BT656_device *device,
+ struct ioh_video_in_frame_size frame_size)
+{
+ if ((frame_size.pitch_size % 128) != 0) {
+
+ ioh_err(device, "In %s -> "
+ "Invalid pitch size", __func__);
+
+ return IOH_VIDEOIN_FAIL;
+ } else {
+ device->video_settings.current_frame_size = frame_size;
+
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return IOH_VIDEOIN_SUCCESS;
+ }
+}
+
+static struct ioh_video_in_frame_size
+ioh_video_in_get_size(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_frame_size;
+}
+
+static s32
+ioh_video_in_set_ip_trans(struct BT656_device *device,
+ enum ioh_video_in_scan_mode_method scan_mode_method)
+{
+ u32 voctrl1;
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Obtaining the device base address. */
+ base_address = device->base_address;
+
+ /* Obtaining the value of VOCTRL1 for updation. */
+ spin_lock(&device->dev_lock);
+ voctrl1 = ioread32(base_address + IOH_VIDEO_IN_VOCTRL1);
+
+ /* Clearing bit6(LDSEL) */
+ RESET_BIT(voctrl1, LDSEL);
+
+ /* Checking the interpolation type and updating the value. */
+ switch (scan_mode_method) {
+ case LINE_INTERPOLATION:
+ voctrl1 |= LINE_INTERPOLATION;
+ break;
+
+ case LINE_DOUBLER:
+ /* Setting bit6(LDSEL) */
+ voctrl1 |= LINE_DOUBLER;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid scan mode method", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Updating the register values. */
+ iowrite32(voctrl1, (base_address + IOH_VIDEO_IN_VOCTRL1));
+
+ /* Confirming the register write. */
+ if ((voctrl1 == ioread32(base_address + IOH_VIDEO_IN_VOCTRL1))) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.
+ current_scan_mode_method = scan_mode_method;
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.current_scan_mode_method =
+ INVALID_IP_TRANS_MODE;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+out:
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static enum ioh_video_in_scan_mode_method
+ioh_video_in_get_ip_trans(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_scan_mode_method;
+}
+
+static s32
+ioh_video_in_set_luminance_level(struct BT656_device *device,
+ struct ioh_video_in_luminance_settings
+ luminance_settings)
+{
+ u32 lumlev;
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Obtaining the base address of the device. */
+ base_address = device->base_address;
+
+ spin_lock(&device->dev_lock);
+
+ /* Reading the luminance register value for updation. */
+ lumlev = ioread32(base_address + IOH_VIDEO_IN_LUMLEV);
+
+ /* Resetting bit7(NOSIG) */
+ RESET_BIT(lumlev, NOSIG);
+
+ /* Checking and setting the NOSIG value. */
+ switch (luminance_settings.luminance_nosig) {
+ case NOSIG_NORMAL_MODE:
+ /* Resetting bit7(NOSIG) */
+ lumlev |= NOSIG_NORMAL_MODE;
+ break;
+
+ case NOSIG_NOINMASTER_MODE:
+ /* Setting bit7(NOSIG) */
+ lumlev |= NOSIG_NOINMASTER_MODE;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid luminance NOSIG format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Resetting bits0-3(LUMLEV) */
+ RESET_BIT_RANGE(lumlev, IOH_BIT_0, IOH_BIT_3);
+
+ /* Checking and setting the luminance level values. */
+ switch (luminance_settings.luminance_lumlev) {
+ case LUMLEV_78_PERCENT:
+ lumlev |= LUMLEV_78_PERCENT;
+ break;
+
+ case LUMLEV_81_PERCENT:
+ lumlev |= LUMLEV_81_PERCENT;
+ break;
+
+ case LUMLEV_84_PERCENT:
+ lumlev |= LUMLEV_84_PERCENT;
+ break;
+
+ case LUMLEV_87_PERCENT:
+ lumlev |= LUMLEV_87_PERCENT;
+ break;
+
+ case LUMLEV_90_PERCENT:
+ lumlev |= LUMLEV_90_PERCENT;
+ break;
+
+ case LUMLEV_93_PERCENT:
+ lumlev |= LUMLEV_93_PERCENT;
+ break;
+
+ case LUMLEV_96_PERCENT:
+ lumlev |= LUMLEV_96_PERCENT;
+ break;
+
+ case LUMLEV_100_PERCENT:
+ lumlev |= LUMLEV_100_PERCENT;
+ break;
+
+ case LUMLEV_103_PERCENT:
+ lumlev |= LUMLEV_103_PERCENT;
+ break;
+
+ case LUMLEV_106_PERCENT:
+ lumlev |= LUMLEV_106_PERCENT;
+ break;
+
+ case LUMLEV_109_PERCENT:
+ lumlev |= LUMLEV_109_PERCENT;
+ break;
+
+ case LUMLEV_112_PERCENT:
+ lumlev |= LUMLEV_112_PERCENT;
+ break;
+
+ case LUMLEV_115_PERCENT:
+ lumlev |= LUMLEV_115_PERCENT;
+ break;
+
+ case LUMLEV_118_PERCENT:
+ lumlev |= LUMLEV_118_PERCENT;
+ break;
+
+ case LUMLEV_121_PERCENT:
+ lumlev |= LUMLEV_121_PERCENT;
+ break;
+
+ case LUMLEV_125_PERCENT:
+ lumlev |= LUMLEV_125_PERCENT;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid luminance level format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Updating the register values. */
+ iowrite32(lumlev, (base_address + IOH_VIDEO_IN_LUMLEV));
+
+ /* Confirming the register write. */
+ if (lumlev == ioread32(base_address + IOH_VIDEO_IN_LUMLEV)) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.current_luminance_settings =
+ luminance_settings;
+
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.current_luminance_settings =
+ invalid_luminance_level;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+out:
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_luminance_settings
+ioh_video_in_get_luminance_level(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_luminance_settings;
+}
+
+static s32
+ioh_video_in_set_rgb_gain(struct BT656_device *device,
+ struct ioh_video_in_rgb_gain_settings
+ rgb_gain_settings)
+{
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ spin_lock(&device->dev_lock);
+
+ /* Obtaining the base address of the device. */
+ base_address = device->base_address;
+
+ /* Updating the register values. */
+ iowrite32((u32) rgb_gain_settings.r_gain,
+ (base_address + IOH_VIDEO_IN_RGAIN));
+ iowrite32((u32) rgb_gain_settings.g_gain,
+ (base_address + IOH_VIDEO_IN_GGAIN));
+ iowrite32((u32) rgb_gain_settings.b_gain,
+ (base_address + IOH_VIDEO_IN_BGAIN));
+
+ /* Confirming the write operation. */
+ if (((u32) rgb_gain_settings.r_gain ==
+ ioread32(base_address + IOH_VIDEO_IN_RGAIN))
+ && ((u32) rgb_gain_settings.g_gain ==
+ ioread32(base_address + IOH_VIDEO_IN_GGAIN))
+ && ((u32) rgb_gain_settings.b_gain ==
+ ioread32(base_address + IOH_VIDEO_IN_BGAIN))) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.
+ current_rgb_gain_settings = rgb_gain_settings;
+
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ rgb_gain_settings.r_gain =
+ (u8) ioread32(base_address + IOH_VIDEO_IN_RGAIN);
+ rgb_gain_settings.g_gain =
+ (u8) ioread32(base_address + IOH_VIDEO_IN_GGAIN);
+ rgb_gain_settings.b_gain =
+ (u8) ioread32(base_address + IOH_VIDEO_IN_BGAIN);
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_rgb_gain_settings
+ioh_video_in_get_rgb_gain(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_rgb_gain_settings;
+}
+
+static s32 ioh_video_in_cap_start(struct BT656_device *device)
+{
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Thread exist and is sleeping. */
+ if ((false == device->thread_exit_flag) &&
+ (true == device->thread_sleep_flag)) {
+
+ device->thread_sleep_flag = false;
+ wake_up(&device->thread_sleep_queue);
+
+ ioh_dbg(device, "In %s -> "
+ "Video capturing started", __func__);
+
+ } else if (true == device->thread_exit_flag) {
+ ioh_err(device, "In %s -> "
+ "Thread exited", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static void ioh_video_in_cap_stop(struct BT656_device *device)
+{
+ /* If thread has not exited and thread is not sleeping. */
+ if ((false == device->thread_exit_flag)
+ && (false == device->thread_sleep_flag)) {
+
+ device->thread_sleep_flag = true;
+ wake_up(&device->thread_sleep_queue);
+
+ ioh_dbg(device, "In %s -> "
+ "Video capturing stopped", __func__);
+ }
+
+ ioh_dbg(device, "Function %s ended", __func__);
+}
+
+static s32
+ioh_video_in_set_blank_tim(struct BT656_device *device,
+ struct ioh_video_in_blank_tim_settings
+ blank_tim_settings)
+{
+ u32 blnkim;
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Obtaining the base address of the device. */
+ base_address = device->base_address;
+
+ spin_lock(&device->dev_lock);
+
+ /* Obtaining the BLNKTIM register value for updation. */
+ blnkim = ioread32(base_address + IOH_VIDEO_IN_BLNKTIM);
+
+ /* Resetting bit7(CNTCTL) */
+ RESET_BIT(blnkim, CNTCTL);
+
+ /* Checking and setting the CNTCTL values. */
+ switch (blank_tim_settings.blank_tim_cntctl) {
+ case CNTCTL_STANDARD_SIGNAL:
+ /* Resetting bit7(CNTCTL) */
+ blnkim |= CNTCTL_STANDARD_SIGNAL;
+ break;
+
+ case CNTCTL_NON_STANDARD_SIGNAL:
+ /* Setting bit7(CNTCTL) */
+ blnkim |= CNTCTL_NON_STANDARD_SIGNAL;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid CNTCTL format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS == retval) {
+
+ /* Resetting bit0-3(BLKADJ) */
+ RESET_BIT_RANGE(blnkim, IOH_BIT_0, IOH_BIT_3);
+
+ /* Checking and setting the BLKADJ values. */
+ switch (blank_tim_settings.blank_tim_blkadj) {
+ case BLKADJ_MINUS_8_PIXEL:
+ blnkim |= BLKADJ_MINUS_8_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_7_PIXEL:
+ blnkim |= BLKADJ_MINUS_7_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_6_PIXEL:
+ blnkim |= BLKADJ_MINUS_6_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_5_PIXEL:
+ blnkim |= BLKADJ_MINUS_5_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_4_PIXEL:
+ blnkim |= BLKADJ_MINUS_4_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_3_PIXEL:
+ blnkim |= BLKADJ_MINUS_3_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_2_PIXEL:
+ blnkim |= BLKADJ_MINUS_2_PIXEL;
+ break;
+
+ case BLKADJ_MINUS_1_PIXEL:
+ blnkim |= BLKADJ_MINUS_1_PIXEL;
+ break;
+
+ case BLKADJ_0_PIXEL:
+ blnkim |= BLKADJ_0_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_1_PIXEL:
+ blnkim |= BLKADJ_PLUS_1_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_2_PIXEL:
+ blnkim |= BLKADJ_PLUS_2_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_3_PIXEL:
+ blnkim |= BLKADJ_PLUS_3_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_4_PIXEL:
+ blnkim |= BLKADJ_PLUS_4_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_5_PIXEL:
+ blnkim |= BLKADJ_PLUS_5_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_6_PIXEL:
+ blnkim |= BLKADJ_PLUS_6_PIXEL;
+ break;
+
+ case BLKADJ_PLUS_7_PIXEL:
+ blnkim |= BLKADJ_PLUS_7_PIXEL;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid BLKADJ format", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+ }
+
+ if (IOH_VIDEOIN_SUCCESS == retval) {
+
+ /* Updating the register values. */
+ iowrite32(blnkim, (base_address + IOH_VIDEO_IN_BLNKTIM));
+
+ /* confirming the register updation. */
+ if ((blnkim ==
+ ioread32(base_address + IOH_VIDEO_IN_BLNKTIM))) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.current_blank_tim_settings
+ = blank_tim_settings;
+
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.
+ current_blank_tim_settings = invalid_blank_tim;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+ }
+
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_blank_tim_settings
+ioh_video_in_get_blank_tim(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_blank_tim_settings;
+}
+
+static s32
+ioh_video_in_set_bb(struct BT656_device *device,
+ enum ioh_video_in_bb_mode output_bb_mode)
+{
+ u32 voctrl2;
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Obtaining the base address of the device. */
+ base_address = device->base_address;
+
+ spin_lock(&device->dev_lock);
+
+ /* Reading the VOCTRL2 register value for updation. */
+ voctrl2 = ioread32(base_address + IOH_VIDEO_IN_VOCTRL2);
+
+ /* Resetting bit6(BBON) */
+ RESET_BIT(voctrl2, BBON);
+
+ /* Checking and setting the BBOB bit value. */
+ switch (output_bb_mode) {
+ case BB_OUTPUT_OFF:
+ /* Resetting bit6(BBON) */
+ voctrl2 |= BB_OUTPUT_OFF;
+ break;
+
+ case BB_OUTPUT_ON:
+ /* Setting bit6(BBON) */
+ voctrl2 |= BB_OUTPUT_ON;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid Blue background mode", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if (IOH_VIDEOIN_SUCCESS != retval)
+ goto out;
+
+ /* Updationg the VOCTRL2 register value. */
+ iowrite32(voctrl2, (base_address + IOH_VIDEO_IN_VOCTRL2));
+
+ /* Confirming the register updation. */
+ if (voctrl2 == ioread32(base_address + IOH_VIDEO_IN_VOCTRL2)) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.current_bb_mode = output_bb_mode;
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.current_bb_mode = INVALID_BB_MODE;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+out:
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static enum ioh_video_in_bb_mode
+ioh_video_in_get_bb(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_bb_mode;
+}
+
+static s32
+ioh_video_in_set_cb(struct BT656_device *device,
+ struct ioh_video_in_cb_settings cb_settings)
+{
+ u32 voctrl2;
+ void __iomem *base_address;
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+
+ /* Obtaining the base address of the device. */
+ base_address = device->base_address;
+
+ spin_lock(&device->dev_lock);
+
+ /* Reading the VOCTRL2 register value for updation. */
+ voctrl2 = ioread32(base_address + IOH_VIDEO_IN_VOCTRL2);
+
+ /* Resetting bit7(CBON) */
+ RESET_BIT(voctrl2, CBON);
+
+ /* checking and setting the CB_Mode bits. */
+ switch (cb_settings.cb_mode) {
+ case CB_OUTPUT_OFF:
+ /* Resetting bit7(CBON) */
+ voctrl2 |= CB_OUTPUT_OFF;
+ cb_settings.cb_outlev =
+ device->video_settings.current_cb_settings.cb_outlev;
+ break;
+
+ case CB_OUTPUT_ON:
+ /* Setting bit7(CBON) */
+ voctrl2 |= CB_OUTPUT_ON;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid Color Bar Mode", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+
+ if ((IOH_VIDEOIN_SUCCESS == retval)
+ && (CB_OUTPUT_ON == cb_settings.cb_mode)) {
+ /* Resetting bit0-1(OUTLEV) */
+ RESET_BIT_RANGE(voctrl2, IOH_BIT_0, IOH_BIT_1);
+
+ /* Checking and setting the CB outlev values. */
+ switch (cb_settings.cb_outlev) {
+ case CB_OUTLEV_25_PERCENT:
+ voctrl2 |= CB_OUTLEV_25_PERCENT;
+ break;
+
+ case CB_OUTLEV_50_PERCENT:
+ voctrl2 |= CB_OUTLEV_50_PERCENT;
+ break;
+
+ case CB_OUTLEV_75_PERCENT:
+ voctrl2 |= CB_OUTLEV_75_PERCENT;
+ break;
+
+ case CB_OUTLEV_100_PERCENT:
+ voctrl2 |= CB_OUTLEV_100_PERCENT;
+ break;
+
+ default:
+ ioh_err(device, "In %s -> "
+ "Invalid Color Bar output level", __func__);
+
+ retval = IOH_VIDEOIN_FAIL;
+ break;
+ }
+ }
+
+ if (IOH_VIDEOIN_SUCCESS == retval) {
+ /* Updating the register values. */
+ iowrite32(voctrl2, (base_address + IOH_VIDEO_IN_VOCTRL2));
+
+ if ((voctrl2 == ioread32(
+ (base_address + IOH_VIDEO_IN_VOCTRL2)))) {
+ ioh_dbg(device, "In %s -> "
+ "Register write successful", __func__);
+
+ device->video_settings.
+ current_cb_settings = cb_settings;
+ } else {
+ ioh_err(device, "In %s -> "
+ "Register write unsuccessful", __func__);
+
+ device->video_settings.
+ current_cb_settings = invalid_cb_settings;
+
+ retval = IOH_VIDEOIN_FAIL;
+ }
+ }
+
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct
+ioh_video_in_cb_settings ioh_video_in_get_cb(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->video_settings.current_cb_settings;
+}
+
+static u32 ioh_video_in_get_buffer_size(struct BT656_device *device)
+{
+ u32 retval;
+ u32 X_comp;
+ u32 Y_comp;
+ u32 X_size;
+
+ X_comp = device->video_settings.current_frame_size.X_component;
+ Y_comp = device->video_settings.current_frame_size.Y_component;
+ X_size = device->video_settings.current_frame_size.pitch_size;
+
+ retval = X_size * Y_comp;
+
+ ioh_dbg(device, "Function %s invoked successfully(%u)",
+ __func__, retval);
+
+ return retval;
+}
+
+static u32 ioh_video_in_get_image_size(struct BT656_device *device)
+{
+ u32 bytes_per_pixel;
+ u32 X_comp;
+ u32 Y_comp;
+ u32 retval;
+
+ X_comp = device->video_settings.current_frame_size.X_component;
+ Y_comp = device->video_settings.current_frame_size.Y_component;
+
+ switch (device->video_settings.current_output_format.format) {
+ case YCBCR_422_8BIT:
+ bytes_per_pixel = 2;
+ break;
+
+ case YCBCR_422_10BIT:
+ bytes_per_pixel = 4;
+ break;
+
+ case YCBCR_444_8BIT:
+ bytes_per_pixel = 4;
+ break;
+
+ case YCBCR_444_10BIT:
+ bytes_per_pixel = 4;
+ break;
+
+ case RGB888:
+ bytes_per_pixel = 4;
+ break;
+
+ case RGB666:
+ bytes_per_pixel = 4;
+ break;
+
+ case RGB565:
+ bytes_per_pixel = 4;
+ break;
+
+ case RAW_8BIT:
+ bytes_per_pixel = 2;
+ break;
+
+ case RAW_10BIT:
+ bytes_per_pixel = 2;
+ break;
+
+ case RAW_12BIT:
+ bytes_per_pixel = 2;
+ break;
+
+ default:
+ bytes_per_pixel = 0;
+ break;
+ }
+
+ retval = (X_comp * Y_comp * bytes_per_pixel);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+static u32 ioh_video_in_alloc_frame_buffer(struct BT656_device *device,
+ struct ioh_video_in_frame_buffer_info info)
+{
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+ int i;
+
+ if (info.buffer_num > MAXIMUM_FRAME_BUFFERS) {
+ retval = IOH_VIDEOIN_FAIL;
+ } else if (info.order <= 0) {
+ retval = IOH_VIDEOIN_FAIL;
+ } else {
+ device->frame_buffer_info.buffer_num = info.buffer_num;
+
+ device->frame_buffer_info.order = info.order;
+
+ for (i = 0; i < info.buffer_num; i++) {
+ device->bufs.frame_buffer[i].virt_addr =
+ (u32)dma_alloc_coherent(&device->p_device->dev,
+ (PAGE_SIZE <<
+ device->frame_buffer_info.order),
+ (dma_addr_t *)&(device->
+ bufs.frame_buffer[i].phy_addr),
+ GFP_ATOMIC);
+
+ if (0 == device->bufs.frame_buffer[i].virt_addr) {
+ retval = IOH_VIDEOIN_FAIL;
+ ioh_err(device, "In %s -> "
+ "Function dma_alloc_coherent "
+ "failed for Video Frame Buffer %d",
+ __func__, i);
+ break;
+ }
+
+ device->bufs.frame_buffer[i].index = i;
+
+ device->bufs.frame_buffer[i].data_size = 0;
+ }
+ }
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static u32 ioh_video_in_free_frame_buffer(struct BT656_device *device,
+ struct ioh_video_in_frame_buffer_info info)
+{
+ s32 retval = IOH_VIDEOIN_SUCCESS;
+ int i;
+
+ if (info.buffer_num != device->frame_buffer_info.buffer_num) {
+ retval = IOH_VIDEOIN_FAIL;
+ } else if (info.order != device->frame_buffer_info.order) {
+ retval = IOH_VIDEOIN_FAIL;
+ } else {
+ for (i = 0; i < info.buffer_num; i++) {
+ if (device->bufs.frame_buffer[i].virt_addr) {
+ dma_free_coherent(&device->p_device->dev,
+ (PAGE_SIZE <<
+ device->
+ frame_buffer_info.order),
+ (void *)device->
+ bufs.frame_buffer[i].virt_addr,
+ (dma_addr_t)device->
+ bufs.frame_buffer[i].phy_addr
+ );
+ device->bufs.frame_buffer[i].index = 0;
+
+ device->bufs.frame_buffer[i].virt_addr = 0;
+
+ device->bufs.frame_buffer[i].phy_addr = 0;
+
+ device->bufs.frame_buffer[i].data_size = 0;
+ }
+ }
+ }
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_frame_buffers
+ioh_video_in_get_frame_buffers(struct BT656_device *device)
+{
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return device->bufs;
+}
+
+static ssize_t ioh_video_in_read_sub(struct BT656_device *device,
+ char __user *p_buffer,
+ struct ioh_video_in_frame_buffer *r_frame,
+ size_t size,
+ unsigned int f_flag)
+{
+ struct BT656_device *dev;
+ int repeat_flag;
+ ssize_t retval = -EAGAIN;
+ /* Reference to the current frame.*/
+ struct ioh_video_in_frame_buffer *frame;
+ dev = ((struct BT656_device *)device);
+
+ do {
+ repeat_flag = 0;
+
+ /* Attaining the read lock
+ and obtaining the size of data that can be read. */
+ ioh_video_in_lock_buffer(&(dev->read_buffer_lock));
+
+ if (NULL != dev->read_buffer) {
+ ioh_dbg(device, "In %s -> "
+ "Read Buffer Not Empty", __func__);
+
+ /* Obtaing the current latest frame. */
+ frame = dev->read_buffer;
+
+ /* Updating the read buffer. */
+ dev->read_buffer = NULL;
+
+ if (frame->data_size < size)
+ size = frame->data_size;
+
+ if (p_buffer != NULL) {
+ /* If copying of video data
+ to the user space failed. */
+ if (0 != copy_to_user((void *)p_buffer,
+ (void *)frame->virt_addr, size)) {
+ ioh_err(device,
+ "In %s -> "
+ "Function copy_to_user "
+ "failed", __func__);
+ retval = -EFAULT;
+ } else { /* Copying successful. */
+ ioh_dbg(device, "In %s -> "
+ "Function copy_to_user "
+ "invoked successfully",
+ __func__);
+ retval = size;
+ }
+ } else {
+ /* read buffer info to r_frame */
+ *r_frame = *frame;
+ retval = size;
+ }
+ frame->data_size = 0;
+ ioh_video_in_unlock_buffer(&(dev->read_buffer_lock));
+ } else {
+ ioh_video_in_unlock_buffer(&(dev->read_buffer_lock));
+
+ ioh_dbg(device, "In %s -> "
+ "The video buffer is empty", __func__);
+
+ /* If device has been opened
+ without non-block mode. */
+ if (!(f_flag)) {
+ /* If video capturing thread
+ is not sleeping. */
+ if (false == dev->thread_sleep_flag) {
+
+ /* Preparing to enter
+ the wait state for capturing
+ data. */
+ dev->read_wait_flag = true;
+
+ ioh_dbg(device, "In %s -> "
+ "Read wait flag set to true",
+ __func__);
+
+ ioh_dbg(device, "In %s -> "
+ "Entering the wait state",
+ __func__);
+
+ retval = wait_event_interruptible(
+ dev->read_wait_queue,
+ (false == dev->read_wait_flag));
+
+ /* If wait failed. */
+ if (-ERESTARTSYS == retval) {
+ ioh_err(device,
+ "In %s -> "
+ "Read wait failed",
+ __func__);
+ retval = -EIO;
+ } else {
+ ioh_dbg(device, "In %s -> "
+ "Exiting from "
+ "the wait state",
+ __func__);
+
+ /* Attaining the loack
+ over the raed
+ buffer. */
+ ioh_video_in_lock_buffer
+ (&(dev->read_buffer_lock));
+
+ /* Checking whether read data
+ has been updated
+ after wait state. */
+ if (NULL != dev->read_buffer) {
+ ioh_dbg(device, "In %s"
+ " -> Data capturing "
+ "successfully after "
+ "wait", __func__);
+
+ /* Setting flag for
+ repeating. */
+ repeat_flag = 1;
+ } else {
+ /* No video data is available
+ for reading. */
+
+ ioh_err(device, "In "
+ "%s -> "
+ "Video data cannot "
+ "be captured even "
+ "after wait",
+ __func__);
+ }
+
+ /* Releasing the lock over the
+ read buffer. */
+ ioh_video_in_unlock_buffer(&
+ (dev->read_buffer_lock));
+ }
+ } else {
+ /* Video capturing thread is sleeping. */
+
+ ioh_err(device, "In %s -> "
+ "Video capturing not "
+ "initiated", __func__);
+
+ retval = -EIO;
+ }
+ }
+ }
+ } while (repeat_flag);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static struct ioh_video_in_frame_buffer
+ioh_video_in_read_frame_buffer(struct BT656_device *device)
+{
+ struct ioh_video_in_frame_buffer r_frame;
+ ssize_t retval;
+
+ r_frame.index = -1;
+ r_frame.virt_addr = (unsigned int)NULL;
+ r_frame.phy_addr = (unsigned int)NULL;
+ r_frame.data_size = 0;
+
+ retval = ioh_video_in_read_sub(device,
+ NULL,
+ &r_frame,
+ 0,
+ 0); /* 1 means non blocking */
+
+ ioh_dbg(device, "Function %s invoked successfully", __func__);
+
+ return r_frame;
+}
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+static irqreturn_t ioh_video_in_interrupt(int irq, void *dev_id)
+{
+ u32 insts;
+ u32 emask;
+ void __iomem *base_address;
+ irqreturn_t retval = IRQ_NONE;
+ struct ioh_vin_dev *dev = dev_id;
+ struct BT656_device *device = dev->video_in_dev;
+
+ /* Obtaining the base address. */
+ base_address = device->base_address;
+
+ /* Reading the interrupt register. */
+ insts = ((ioread32(base_address + IOH_VIDEO_IN_INTSTS)) & INTBITS);
+ emask = ((ioread32(base_address + IOH_VIDEO_IN_INTENB)) & INTBITS);
+
+ if ((emask & insts) == 0) {
+ ioh_dbg(device, "In %s -> No interrupt source "
+ "insts = 0x%08x emask = 0x%08x",
+ __func__, insts, emask);
+ goto out;
+ }
+
+ ioh_dbg(device, "In %s -> insts = 0x%08x, emask = 0x%08x",
+ __func__, insts, emask);
+
+ if (LIKELY(((emask & insts) & VSINTSTS) != 0)) {
+
+ ioh_dbg(device, "In %s -> VSYNC interrupt handled", __func__);
+
+ if (device->vsync_waiting_flag == true) {
+ device->vsync_waiting_flag = false;
+ wake_up_interruptible(&(device->vsync_wait_queue));
+
+ ioh_dbg(device, "In %s -> wake up by vsync", __func__);
+ }
+ retval = IRQ_HANDLED;
+ }
+ if (((emask & insts) & HSINTSTS) != 0) {
+
+ ioh_dbg(device, "In %s -> HSYNC interrupt handled", __func__);
+
+ retval = IRQ_HANDLED;
+ }
+ if (((emask & insts) & OFINTSTS) != 0) {
+
+ ioh_dbg(device, "In %s -> "
+ "Buffer Overflow interrupt handled", __func__);
+
+ if (device->overflow_flag == false) {
+
+ ioh_dbg(device, "[OVERFLOW]In %s -> "
+ "overflow_flag is true", __func__);
+
+ device->overflow_flag = true;
+ }
+ retval = IRQ_HANDLED;
+ }
+
+out:
+ /* Clearing of interrupts if any interrupt exists */
+ iowrite32(insts, (base_address + IOH_VIDEO_IN_INTSTS));
+
+ ioh_dbg(device, "In %s -> "
+ "Interrupt handled and cleared.", __func__);
+
+ return retval;
+}
+
+static void ioh_video_in_dma_complete(void *arg)
+{
+ struct BT656_device *device = arg;
+
+ async_tx_ack(device->desc_dma);
+
+ ioh_dbg(device, "In %s -> "
+ "dmarenb disable and wake up the thread_sleep_queue",
+ __func__);
+
+ device->dma_flag = 1;
+ wake_up(&device->thread_sleep_queue);
+
+ ioh_dbg(device, "Function %s ended", __func__);
+}
+
+static u32 ioh_video_in_get_additional_line_size(struct BT656_device *device)
+{
+ enum ioh_video_in_input_data_format format;
+ u32 addition = 0;
+
+ format = (device)->
+ video_settings.current_input_format.format;
+
+ if ((format != NT_RAW_8BIT)
+ && (format != NT_RAW_10BIT)
+ && (format != NT_RAW_12BIT))
+ addition = 3;
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, addition);
+
+ return addition;
+}
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+static s32 ioh_video_in_make_dma_descriptors(struct BT656_device *device,
+ u32 idx)
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+static s32 ioh_video_in_make_dma_descriptors(struct BT656_device *device)
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+{
+ u32 i, j; /* DMA buffer and descriptor index variable. */
+
+ struct BT656_device *priv = device;
+ struct scatterlist *sg;
+ dma_addr_t dma;
+ void *buf;
+
+ u32 Y_comp = 0; /* The Y-component. */
+ u32 addition = 0;
+ u32 bytes_per_line_image = 0; /* The bytes per line of image. */
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ u32 idx;
+ int nent;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ Y_comp = device->video_settings.current_frame_size.Y_component;
+ bytes_per_line_image = ioh_video_in_get_image_size(device);
+ bytes_per_line_image = bytes_per_line_image / Y_comp;
+ addition = ioh_video_in_get_additional_line_size(device);
+
+ ioh_dbg(device, "In %s -> X = %d bytes, Y = %d+%d line",
+ __func__, bytes_per_line_image, Y_comp, addition);
+
+ spin_lock(&device->dev_lock);
+
+ i = 0;
+
+ priv->nent = (Y_comp + addition);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ sg = priv->sg_dma + (idx * (Y_comp + addition));
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ sg = priv->sg_dma;
+ for (idx = 0; idx < device->frame_buffer_info.buffer_num; idx++) {
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* Making one descriptor set */
+ priv->sg_dma_list[idx] = sg;
+
+ sg_init_table(sg, (Y_comp + addition));
+
+ for (j = 0; j < Y_comp; j++, sg++) {
+ dma = device->dma_buffer_phy[idx] +
+ (j * bytes_per_line_image);
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ buf = phys_to_virt(dma);
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ buf = device->dma_buffer_virt[idx] +
+ (j * bytes_per_line_image);
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ sg_set_page(sg,
+ virt_to_page(buf),
+ bytes_per_line_image / 4,
+ (unsigned long)buf & ~PAGE_MASK);
+ sg_dma_address(sg) = dma;
+ sg_dma_len(sg) = bytes_per_line_image / 4;
+ }
+
+ /* Last 3 descriptor are empty transfer if not RAW */
+ for (j = 0; j < addition; j++, sg++) {
+ dma = device->dma_buffer_phy[idx];
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ buf = phys_to_virt(dma);
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ buf = device->dma_buffer_virt[idx];
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ sg_set_page(sg,
+ virt_to_page(buf),
+ 0,
+ (unsigned long)buf & ~PAGE_MASK);
+ sg_dma_address(sg) = dma;
+ sg_dma_len(sg) = 0;
+ }
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+/* TODO ? */
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ nent = dma_map_sg(&priv->p_device->dev,
+ priv->sg_dma_list[idx],
+ (Y_comp + addition),
+ DMA_FROM_DEVICE);
+ ioh_dbg(device, "In %s -> nent %d", __func__, nent);
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return IOH_VIDEOIN_SUCCESS;
+}
+
+static s32 ioh_video_in_dma_submit(struct BT656_device *device,
+ u32 index)
+{
+ struct BT656_device *priv = device;
+ u32 Y_comp = 0;
+ u32 addition = 0;
+ struct dma_async_tx_descriptor *desc;
+
+ Y_comp = device->video_settings.current_frame_size.Y_component;
+
+ addition = ioh_video_in_get_additional_line_size(device);
+
+ desc = priv->chan_dma->device->device_prep_slave_sg(priv->chan_dma,
+ priv->sg_dma_list[index],
+ ((Y_comp + addition)),
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+ if (!desc) {
+ ioh_err(device, "In %s -> "
+ "device_prep_slave_sg failed", __func__);
+ goto out;
+ }
+
+ priv->desc_dma = desc;
+
+ dma_sync_sg_for_device(&priv->p_device->dev,
+ priv->sg_dma_list[index],
+ priv->nent,
+ DMA_FROM_DEVICE);
+
+ desc->callback = ioh_video_in_dma_complete;
+ desc->callback_param = priv;
+ desc->tx_submit(desc);
+
+/* TODO comment out for unexpexted callback */
+#if 0
+ dma_async_issue_pending(priv->chan_dma);
+#endif
+
+ spin_lock(&(device->dev_lock));
+ device->intenb.dmarenb = ENABLE;
+ device->intenb.ofintenb = ENABLE;
+ device->intenb.vsintenb = ENABLE;
+ write_intenb(device);
+ spin_unlock(&(device->dev_lock));
+
+ ioh_dbg(device, "Function %s (index=%d) ended", __func__, index);
+
+ return IOH_VIDEOIN_SUCCESS;
+out:
+ return IOH_VIDEOIN_FAIL;
+}
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+static s32 ioh_video_in_schedule_next(struct ioh_vin_dev *dev,
+ struct ioh_vin_buffer *buf)
+{
+ struct BT656_device *device = dev->video_in_dev;
+ static int idx;
+
+ device->dma_buffer_phy[idx] = videobuf_to_dma_contig(&buf->vb);
+
+ ioh_video_in_make_dma_descriptors(device, idx);
+
+ buf->frame_index = idx;
+
+ ioh_dbg(device, "%s -> addr[%d] = 0x%08x",
+ __func__, idx, (u32)device->dma_buffer_phy[idx]);
+
+ idx++;
+ if (idx >= N_FRAME_BUF)
+ idx = 0;
+
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return IOH_VIDEOIN_SUCCESS;
+}
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+static s32 ioh_video_in_alloc_dma_desc(struct BT656_device *device)
+{
+ struct BT656_device *priv = device;
+ int num = DESC_SIZE;
+
+ priv->sg_dma = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+ if (priv->sg_dma == NULL) {
+ ioh_err(device, "In %s -> kzalloc failed", __func__);
+ goto out;
+ }
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return IOH_VIDEOIN_SUCCESS;
+out:
+ return IOH_VIDEOIN_FAIL;
+}
+
+static s32 ioh_video_in_free_dma_desc(struct BT656_device *device)
+{
+ struct BT656_device *priv = device;
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+/* TODO ? */
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ int idx;
+
+ for (idx = 0; idx < device->frame_buffer_info.buffer_num; idx++) {
+ dma_unmap_sg(&priv->p_device->dev,
+ priv->sg_dma_list[idx],
+ priv->nent,
+ DMA_FROM_DEVICE);
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ kfree(priv->sg_dma);
+
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return 0;
+}
+
+static s32 ioh_video_in_start_setting(struct ioh_vin_dev *dev)
+{
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ struct BT656_device *device = dev->video_in_dev;
+ unsigned int i;
+ u32 frame_index = 0; /* The frame buffer index. */
+ int ret_val;
+
+ mutex_lock(&dev->mutex);
+
+ for (i = 0; i < device->frame_buffer_info.buffer_num; i++) {
+ device->dma_buffer_virt[i] = (void *)device->
+ bufs.frame_buffer[i].virt_addr;
+ device->dma_buffer_phy[i] = device->
+ bufs.frame_buffer[i].phy_addr;
+ }
+
+ ioh_video_in_make_dma_descriptors(device);
+
+ ret_val = ioh_video_in_dma_submit(device, frame_index);
+
+ ioh_dbg(device, "In %s -> ioh_video_in_dma_submit returned(%d)",
+ __func__, ret_val);
+
+ mutex_unlock(&dev->mutex);
+
+ ioh_dbg(device, "Function %s ended", __func__);
+
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ return 0;
+}
+
+static s32 ioh_video_in_thread_fn(void *data)
+{
+ struct ioh_vin_dev *dev = data;
+ struct BT656_device *device = dev->video_in_dev;
+ /* Accessing the device buffer and flag variables. */
+ /* DMA descriptor start/end physical address */
+ u32 thread_1st_flag = false; /* thread 1st flag*/
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ u32 frame_index = 0; /* The frame buffer index. */
+ u32 frame_count = 0; /* temporary frame count value for debug */
+ u32 frame_index_next;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+ u32 frame_skip_count = 0;
+
+ /* Reference to thread sleep flag. */
+ u8 *thread_sleep_flag = &device->thread_sleep_flag;
+
+ /* Reference to thread exit flag. */
+ u8 *thread_exit_flag = &device->thread_exit_flag;
+
+ /* Reference to suspend flag. */
+ u8 *suspend_flag = &device->suspend_flag;
+
+ /* Reference to dma flag. */
+ u8 *dma_flag = &device->dma_flag;
+
+ /* Reference to overflow flag. */
+ u8 *overflow_flag = &device->overflow_flag;
+
+ /* The DMA enable re-try counter. */
+
+ int ret_val;
+
+ /* Obtaining DMA enabled space for descriptors around 8KB. */
+ mutex_lock(&dev->mutex);
+ if (ioh_video_in_alloc_dma_desc(device) != IOH_VIDEOIN_SUCCESS)
+ goto out;
+
+ ioh_dbg(device, "In %s -> Function "
+ "ioh_video_in_alloc_dma_desc invoked successfully", __func__);
+
+ mutex_unlock(&dev->mutex);
+
+ while (false == *thread_exit_flag) {
+ ioh_dbg(device, "In %s -> "
+ "Thread preparing to sleep if capturing is "
+ "stopped or suspension is enabled", __func__);
+
+ /* Thread trying to sleep
+ if conditions are not suitable. */
+ wait_event(device->thread_sleep_queue,
+ (((false == *thread_sleep_flag)
+ && (false == *suspend_flag))
+ || (true == *thread_exit_flag)));
+
+ if (true == *thread_exit_flag) {
+ ioh_dbg(device, "In %s -> thread_exit_flag was "
+ "true and break the thread", __func__);
+ break;
+ }
+
+ /* Thread trying to capture the video data
+ by enabling the DMA transfer. */
+ *dma_flag = 0;
+
+ if (UNLIKELY(thread_1st_flag == false)) {
+ ioh_video_in_start_setting(dev);
+ thread_1st_flag = true;
+ }
+
+ ioh_dbg(device, "In %s -> "
+ "thread preparing for capturing", __func__);
+
+ wait_event(device->thread_sleep_queue,
+ ((true == (*thread_sleep_flag))
+ /* Thread should not sleep. */
+ || (true == (*thread_exit_flag))
+ /* Thread should not exit. */
+ || (true == (*suspend_flag))
+ /* System should not suspend. */
+ || (1 == (*dma_flag))
+ /* DMA transaction should complete. */
+ ));
+
+ ioh_dbg(device, "In %s -> wait_event end "
+ "thread_sleep_flag=%d, thread_exit_flag=%d, "
+ "suspend_flag=%d, dma_flag=%d",
+ __func__,
+ *thread_sleep_flag, *thread_exit_flag,
+ *suspend_flag, *dma_flag);
+
+ if (UNLIKELY(1 != *dma_flag)) {
+ ioh_dbg(device, "In %s -> dma_flag was not 1 "
+ "and break the threead", __func__);
+ break;
+ }
+
+ spin_lock(&dev->video_in_dev->dev_lock);
+ dev->video_in_dev->intenb.dmarenb = DISABLE;
+ write_intenb(dev->video_in_dev);
+ spin_unlock(&dev->video_in_dev->dev_lock);
+
+ /* if overflow then wait for next vsync */
+ /* else dma is started. if vsync is already comes, start at
+ next frame */
+ if (*overflow_flag == true) {
+ ioh_dbg(device, "[OVERFLOW]In %s -> wait vsync",
+ __func__);
+
+ ioh_video_in_wait_vsync(device);
+ ioh_video_in_wait_vsync(device);
+ }
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ /* next index value */
+ if (frame_index == (device->frame_buffer_info.buffer_num - 1))
+ frame_index_next = 0;
+ else
+ frame_index_next = frame_index + 1;
+
+ ret_val = ioh_video_in_dma_submit(device, frame_index_next);
+
+ ioh_dbg(device, "In %s -> ioh_video_in_dma_submit returned(%d)",
+ __func__, ret_val);
+
+ dma_sync_sg_for_cpu(&device->p_device->dev,
+ device->sg_dma_list[frame_index],
+ device->nent,
+ DMA_FROM_DEVICE);
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ if (frame_skip_count == device->frame_skip_num) {
+ frame_skip_count = 0;
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ /* Updating the size of the video farme captured */
+ device->bufs.frame_buffer[frame_index].data_size
+ = ioh_video_in_get_buffer_size(device);
+
+ /* Attaining the read buffer lock
+ for updating the read buffer. */
+ ioh_video_in_lock_buffer(&
+ (device->read_buffer_lock));
+
+ /* Updating the read buffer. */
+ device->read_buffer = &(device->
+ bufs.frame_buffer[frame_index]);
+
+ ioh_dbg(device, "In %s -> "
+ "Captured index is %d(p:0x%08x v:0x%08x)",
+ __func__,
+ frame_index,
+ (u32)device->read_buffer->phy_addr,
+ (u32)device->read_buffer->virt_addr);
+
+ /* Releasing the read buffer lock. */
+ ioh_video_in_unlock_buffer(&
+ (device->read_buffer_lock));
+
+ /* Wake up the read system call
+ if it is waiting for capture data. */
+ if ((true == device->read_wait_flag)
+ && (*overflow_flag == false)) {
+ device->read_wait_flag = false;
+ wake_up_interruptible(&device->
+ read_wait_queue);
+ frame_count++;
+ ioh_dbg(device, "In %s -> "
+ "frame_count = %d", __func__, frame_count);
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ } else {
+ frame_skip_count++;
+ ioh_dbg(device, "In %s -> "
+ "Video Data skipped", __func__);
+ }
+
+ ioh_videoin_thread_tick(dev);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ frame_index = frame_index_next;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ *overflow_flag = false;
+
+ ioh_dbg(device, "In %s -> "
+ "Video Data captured and "
+ "updated to the video read buffer", __func__);
+
+ } /* while */
+
+ /* Disable the DMA mode. */
+ spin_lock(&(device->dev_lock));
+ device->intenb.dmarenb = DISABLE;
+ device->intenb.ofintenb = DISABLE;
+ write_intenb(device);
+ spin_unlock(&(device->dev_lock));
+
+ ioh_video_in_free_dma_desc(device);
+
+ ioh_dbg(device, "In %s -> Function "
+ "ioh_video_in_free_dma_desc invoked", __func__);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ /* Wake up the read system call if it is waiting for capture data. */
+ if (true == device->read_wait_flag) {
+ device->read_wait_flag = false;
+ wake_up_interruptible(&device->read_wait_queue);
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+out:
+ *thread_exit_flag = true;
+ *thread_sleep_flag = true;
+
+ mutex_unlock(&dev->mutex);
+
+ ret_val = IOH_VIDEOIN_SUCCESS;
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return ret_val;
+}
+
+static s32 ioh_video_in_init(struct BT656_device *device)
+{
+ s32 retval;
+
+ /* Setting the default input format. */
+ retval = ioh_video_in_set_input_format(device,
+ default_input_data_format);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_input_format failed", __func__);
+ goto out;
+ }
+
+ /* Setting the default output format. */
+ retval = ioh_video_in_set_output_format(device,
+ default_output_data_format);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_output_format failed", __func__);
+ goto out;
+ }
+
+ /* Setting the default I/P conversion mode. */
+ retval = ioh_video_in_set_ip_trans(device, DEFAULT_IP_TRANS_SETTINGS);
+
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_ip_trans failed", __func__);
+ goto out;
+ }
+
+ /* Setting the luminance level. */
+ retval = ioh_video_in_set_luminance_level(device,
+ default_luminance_settings);
+
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_luminance_level failed", __func__);
+ goto out;
+ }
+
+ /* Setting the RGB gain settings. */
+ retval = ioh_video_in_set_rgb_gain(device, default_rgb_gain_settings);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_rgb_gain failed", __func__);
+ goto out;
+ }
+
+ /* Setting the Blnaking Signal Timing settings. */
+ retval = ioh_video_in_set_blank_tim(device,
+ default_blank_tim_settings);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_blank_tim failed", __func__);
+ goto out;
+ }
+
+ /* Setting the Blue background settings. */
+ retval = ioh_video_in_set_bb(device, DEFAULT_BB_SETTINGS);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_bb invoked failed", __func__);
+ goto out;
+ }
+
+ /* Setting the Color bar settings. */
+ retval = ioh_video_in_set_cb(device, default_cb_settings);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> Function "
+ "ioh_video_in_set_cb invoked failed", __func__);
+ goto out;
+ }
+
+ spin_lock(&device->dev_lock);
+ device->intenb.drevsem = VSYNC_SYNC;
+ device->intenb.dmarenb = DISABLE;
+ device->intenb.ofintenb = ENABLE;
+ device->intenb.hsintenb = DISABLE;
+ device->intenb.vsintenb = ENABLE;
+ write_intenb(device);
+ spin_unlock(&device->dev_lock);
+
+ /* Enabling the interrupts. */
+ device->dma_flag = -1;
+
+out:
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static void ioh_video_in_exit(struct BT656_device *device)
+{
+ spin_lock(&device->dev_lock);
+ (device)->intenb.drevsem = VSYNC_NOT_SYNC;
+ (device)->intenb.dmarenb = DISABLE;
+ (device)->intenb.ofintenb = DISABLE;
+ (device)->intenb.hsintenb = DISABLE;
+ (device)->intenb.vsintenb = DISABLE;
+ write_intenb(device);
+
+ iowrite32(ASSERT_RESET, device->base_address + IOH_VIDEO_IN_RESET);
+
+ spin_unlock(&device->dev_lock);
+
+ ioh_dbg(device, "Function %s ended", __func__);
+}
+
+/* ---- V4L2 ---- */
+
+/* ------------------------------------------------------------------
+ DMA and thread functions
+ ------------------------------------------------------------------*/
+
+static void
+ioh_vin_fillbuff(struct ioh_vin_dev *dev, struct ioh_vin_buffer *buf)
+{
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ struct BT656_device *device;
+ struct timeval ts;
+
+ device = dev->video_in_dev;
+
+ /* Advice that buffer was filled */
+ buf->vb.field_count++;
+ do_gettimeofday(&ts);
+ buf->vb.ts = ts;
+ buf->vb.state = VIDEOBUF_DONE;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ struct BT656_device *device;
+ int pos = 0;
+ int hmax = buf->vb.height;
+ int wmax = buf->vb.width;
+ struct timeval ts;
+ void *vbuf = videobuf_to_vmalloc(&buf->vb);
+
+ if (!vbuf)
+ return;
+
+ device = dev->video_in_dev;
+
+ /* -- */
+ ioh_video_in_lock_buffer(&(device->read_buffer_lock));
+ if (device->read_buffer != NULL) {
+ memcpy(vbuf + pos, (void *)device->read_buffer->virt_addr,
+ wmax * 2 * hmax); pos += wmax*2 * hmax;
+ ioh_dbg(device, "In %s -> read_buffer is copied"
+ "(p:0x%08x v:0x%08x)", __func__,
+ (u32)device->read_buffer->phy_addr,
+ (u32)device->read_buffer->virt_addr);
+ device->read_buffer = NULL;
+ } else {
+ ioh_dbg(device, "In %s -> read_buffer is NULL", __func__);
+ }
+ ioh_video_in_unlock_buffer(&(device->read_buffer_lock));
+ /* -- */
+
+ /* Advice that buffer was filled */
+ buf->vb.field_count++;
+ do_gettimeofday(&ts);
+ buf->vb.ts = ts;
+ buf->vb.state = VIDEOBUF_DONE;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+}
+
+static void ioh_videoin_thread_tick(struct ioh_vin_dev *dev)
+{
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ struct ioh_vin_buffer *buf;
+ unsigned long flags = 0;
+ int ret_val;
+
+ spin_lock_irqsave(&dev->slock, flags);
+ if (UNLIKELY(list_empty(&dev->vidq_active))) {
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "No active queue to serve", __func__);
+ goto unlock;
+ }
+ if (UNLIKELY(!dev->active_frm)) {
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "No active frame", __func__);
+ goto unlock;
+ }
+
+ buf = dev->active_frm;
+
+ list_del(&buf->vb.queue);
+
+ do_gettimeofday(&buf->vb.ts);
+
+ /* Fill buffer */
+ ioh_vin_fillbuff(dev, buf);
+
+ wake_up(&buf->vb.done);
+
+ if (UNLIKELY(list_empty(&dev->vidq_active))) {
+ /* Stop */
+ dev->active_frm = NULL;
+ dev->vidq_status = IOH_VIDEO_IN_VIDQ_INITIALISING;
+ ioh_dbg(dev->video_in_dev, "In %s -> vidq_active is empty",
+ __func__);
+ goto unlock;
+ }
+
+ dev->active_frm = list_entry(dev->vidq_active.next,
+ struct ioh_vin_buffer, vb.queue);
+
+ ret_val = ioh_video_in_dma_submit(dev->video_in_dev,
+ dev->active_frm->frame_index);
+
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "ioh_video_in_dma_submit returned(%d)",
+ __func__, ret_val);
+
+ if (UNLIKELY(dev->active_frm->vb.queue.next != &dev->vidq_active)) {
+ struct ioh_vin_buffer *new =
+ list_entry(dev->active_frm->vb.queue.next,
+ struct ioh_vin_buffer, vb.queue);
+
+ ioh_video_in_schedule_next(dev, new);
+
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "ioh_video_in_schedule_next was called", __func__);
+ }
+
+unlock:
+ spin_unlock_irqrestore(&dev->slock, flags);
+ return;
+/* --------------------------------- */
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ struct ioh_vin_buffer *buf;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&dev->slock, flags);
+ if (list_empty(&dev->vidq_active)) {
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "No active queue to serve", __func__);
+ goto unlock;
+ }
+
+ buf = list_entry(dev->vidq_active.next,
+ struct ioh_vin_buffer, vb.queue);
+
+ /* Nobody is waiting on this buffer, return */
+ if (!waitqueue_active(&buf->vb.done)) {
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "No active frame", __func__);
+ goto unlock;
+ }
+
+#if 1
+ if (dev->video_in_dev->read_buffer == NULL) {
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "read_buffer is NULL", __func__);
+ goto unlock;
+ }
+#endif
+
+ list_del(&buf->vb.queue);
+
+ do_gettimeofday(&buf->vb.ts);
+
+ /* Fill buffer */
+ ioh_vin_fillbuff(dev, buf);
+
+ wake_up(&buf->vb.done);
+unlock:
+ spin_unlock_irqrestore(&dev->slock, flags);
+ return;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+}
+
+/* ------------------------------------------------------------------
+ Videobuf operations
+ ------------------------------------------------------------------*/
+static int
+buffer_setup(struct videobuf_queue *vq,
+ unsigned int *count, unsigned int *size)
+{
+ struct ioh_vin_fh *fh = vq->priv_data;
+ struct ioh_vin_dev *dev = fh->dev;
+
+ *size = fh->pix_format.sizeimage;
+
+ if (0 == *count)
+ *count = 32;
+
+ while (*size * *count > vid_limit * 1024 * 1024)
+ (*count)--;
+
+ ioh_dbg(dev->video_in_dev, "%s, count=%d, size=%d\n", __func__,
+ *count, *size);
+
+ return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct ioh_vin_buffer *buf)
+{
+ struct ioh_vin_fh *fh = vq->priv_data;
+ struct ioh_vin_dev *dev = fh->dev;
+
+ ioh_dbg(dev->video_in_dev, "%s, state: %i\n", __func__, buf->vb.state);
+
+ if (in_interrupt())
+ BUG();
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ videobuf_dma_contig_free(vq, &buf->vb);
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ videobuf_vmalloc_free(&buf->vb);
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+ ioh_dbg(dev->video_in_dev, "free_buffer: freed\n");
+ buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+#define norm_minw() (320)
+#define norm_minh() (240)
+#define norm_maxw() 1280
+#define norm_maxh() (1024 + 3)
+static int
+buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+ enum v4l2_field field)
+{
+ struct ioh_vin_fh *fh = vq->priv_data;
+ struct ioh_vin_dev *dev = fh->dev;
+ struct ioh_vin_buffer *buf =
+ container_of(vb, struct ioh_vin_buffer, vb);
+ int rc;
+
+ ioh_dbg(dev->video_in_dev, "%s, field=%d\n", __func__, field);
+
+ BUG_ON(NULL == fh->fmt);
+
+ if ((fh->pix_format.width < norm_minw()) ||
+ (fh->pix_format.width > norm_maxw()) ||
+ (fh->pix_format.height < norm_minh()) ||
+ (fh->pix_format.height > norm_maxh()))
+ return -EINVAL;
+
+ buf->vb.size = fh->pix_format.sizeimage;
+ if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
+ return -EINVAL;
+
+ /* These properties only change when queue is idle, see s_fmt */
+ buf->fmt = fh->fmt;
+ buf->vb.width = fh->pix_format.width;
+ buf->vb.height = fh->pix_format.height;
+ buf->vb.field = field;
+
+ if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+ rc = videobuf_iolock(vq, &buf->vb, NULL);
+ if (rc < 0)
+ goto fail;
+ }
+
+ buf->vb.state = VIDEOBUF_PREPARED;
+
+ return 0;
+
+fail:
+ free_buffer(vq, buf);
+ return rc;
+}
+
+static void
+buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+ struct ioh_vin_buffer *buf =
+ container_of(vb, struct ioh_vin_buffer, vb);
+ struct ioh_vin_fh *fh = vq->priv_data;
+ struct ioh_vin_dev *dev = fh->dev;
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ int ret_val;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ ioh_dbg(dev->video_in_dev, "%s", __func__);
+
+ buf->vb.state = VIDEOBUF_QUEUED;
+ list_add_tail(&buf->vb.queue, &dev->vidq_active);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ if (dev->vidq_status == IOH_VIDEO_IN_VIDQ_RUNNING) {
+ ioh_dbg(dev->video_in_dev, "%s running"
+ "(vidq_status=%d)", __func__, dev->vidq_status);
+ return;
+ } else if (!dev->active_frm) {
+ ioh_dbg(dev->video_in_dev, "%s first buffer"
+ "(vidq_status=%d)", __func__, dev->vidq_status);
+ dev->active_frm = buf;
+ /* Ready */
+ ioh_video_in_schedule_next(dev, buf);
+
+ spin_unlock_irq(&dev->slock);
+
+ ret_val = ioh_video_in_dma_submit(dev->video_in_dev,
+ dev->active_frm->frame_index);
+
+ spin_lock_irq(&dev->slock);
+
+ ioh_dbg(dev->video_in_dev, "In %s -> "
+ "ioh_video_in_dma_submit returned(%d)",
+ __func__, ret_val);
+
+ } else if (dev->active_frm->vb.queue.next == &buf->vb.queue) {
+ ioh_dbg(dev->video_in_dev, "%s second buffer"
+ "(vidq_status=%d)", __func__, dev->vidq_status);
+ dev->vidq_status = IOH_VIDEO_IN_VIDQ_RUNNING;
+
+ /* Ready for next */
+ ioh_video_in_schedule_next(dev, buf);
+
+ }
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+}
+
+static void buffer_release(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct ioh_vin_buffer *buf =
+ container_of(vb, struct ioh_vin_buffer, vb);
+ struct ioh_vin_fh *fh = vq->priv_data;
+ struct ioh_vin_dev *dev = (struct ioh_vin_dev *)fh->dev;
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&dev->slock, flags);
+ if (dev->active_frm == buf) {
+ spin_lock(&dev->video_in_dev->dev_lock);
+ dev->video_in_dev->intenb.dmarenb = DISABLE;
+ write_intenb(dev->video_in_dev);
+ spin_unlock(&dev->video_in_dev->dev_lock);
+ }
+ if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED)) {
+ vb->state = VIDEOBUF_ERROR;
+ list_del(&vb->queue);
+ }
+ spin_unlock_irqrestore(&dev->slock, flags);
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ ioh_dbg(dev->video_in_dev, "%s", __func__);
+
+ free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops ioh_vin_video_qops = {
+ .buf_setup = buffer_setup,
+ .buf_prepare = buffer_prepare,
+ .buf_queue = buffer_queue,
+ .buf_release = buffer_release,
+};
+
+/* ------------------------------------------------------------------
+ IOCTL vidioc handling
+ ------------------------------------------------------------------*/
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct ioh_vin_fh *fh = priv;
+ struct ioh_vin_dev *dev = fh->dev;
+
+ strcpy(cap->driver, "ioh_vin");
+ strcpy(cap->card, "ioh_vin");
+ strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info));
+ cap->version = IOH_VIN_VERSION;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct ioh_vin_fmt *fmt;
+
+ if (f->index >= ARRAY_SIZE(formats))
+ return -EINVAL;
+
+ fmt = &formats[f->index];
+
+ strlcpy(f->description, fmt->name, sizeof(f->description));
+ f->pixelformat = fmt->fourcc;
+ return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ ioh_dbg(fh->dev->video_in_dev, "%s", __func__);
+
+ f->fmt.pix = fh->pix_format;
+
+ f->fmt.pix.field = fh->vb_vidq.field;
+ f->fmt.pix.pixelformat = fh->fmt->fourcc;
+ f->fmt.pix.bytesperline =
+ (f->fmt.pix.width * fh->fmt->depth) >> 3;
+ f->fmt.pix.sizeimage =
+ f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+ return 0;
+}
+
+static struct ioh_vin_fmt *get_format(struct v4l2_format *f)
+{
+ struct ioh_vin_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ARRAY_SIZE(formats); k++) {
+ fmt = &formats[k];
+ if (fmt->fourcc == f->fmt.pix.pixelformat)
+ break;
+ }
+
+ if (k == ARRAY_SIZE(formats))
+ return NULL;
+
+ return &formats[k];
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct ioh_vin_fh *fh = priv;
+ struct ioh_vin_dev *dev = fh->dev;
+ struct ioh_vin_fmt *fmt;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct v4l2_mbus_framefmt mbus_fmt;
+ int ret;
+
+ ioh_dbg(dev->video_in_dev, "%s", __func__);
+
+ fmt = get_format(f);
+ if (!fmt) {
+ ioh_warn(dev->video_in_dev, "Fourcc format (0x%08x) invalid",
+ pix->pixelformat);
+ return -EINVAL;
+ }
+ ioh_dbg(dev->video_in_dev, "%s Fourcc format (0x%08x) valid",
+ __func__, pix->pixelformat);
+
+ pix->pixelformat = fmt->fourcc;
+ v4l2_fill_mbus_format(&mbus_fmt, pix, fmt->mbus_code);
+
+ ret = sensor_call(dev, video, try_mbus_fmt, &mbus_fmt);
+
+ v4l2_fill_pix_format(pix, &mbus_fmt);
+ pix->bytesperline = (pix->width * fmt->depth) >> 3;
+ pix->sizeimage = pix->height * pix->bytesperline;
+
+ switch (mbus_fmt.field) {
+ case V4L2_FIELD_NONE:
+ break;
+ case V4L2_FIELD_ANY:
+ pix->field = V4L2_FIELD_NONE;
+ break;
+ default:
+ ioh_err(dev->video_in_dev, "Not supported sensor detected");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int ioh_video_in_setting_s_fmt(struct ioh_vin_dev *dev,
+ struct v4l2_format *fmt)
+{
+ struct ioh_video_in_input_format input_format;
+ struct ioh_video_in_output_format output_format;
+ struct ioh_video_in_frame_size frame_size;
+ struct BT656_device *device;
+ int ret;
+
+ device = dev->video_in_dev;
+
+ /* input format setting for videoin */
+ switch (v4l2_i2c_subdev_addr(dev->sensor)) {
+ case OV7620_ADDR:
+ ioh_info(dev->video_in_dev, "sensor is OV7620");
+ input_format.format = NT_RAW_8BIT;
+ input_format.numerical_format = DONT_CARE_NUMERICAL_FORMAT;
+ device->frame_skip_num = 0;
+ break;
+ case OV9653_ADDR:
+ ioh_info(dev->video_in_dev, "sensor is OV9653");
+ input_format.format = NT_RAW_8BIT;
+ input_format.numerical_format = DONT_CARE_NUMERICAL_FORMAT;
+ device->frame_skip_num = 0;
+ break;
+ case ML86V76651_ADDR:
+ ioh_info(dev->video_in_dev, "sensor is ML86V76651");
+ input_format.format = NT_SQPX_ITU_R_BT_656_4_8BIT;
+ input_format.numerical_format = DONT_CARE_NUMERICAL_FORMAT;
+ device->frame_skip_num = 0;
+ break;
+ case NCM13J_ADDR:
+ ioh_info(dev->video_in_dev, "sensor is NCM13J");
+ input_format.format = NT_RAW_8BIT;
+ input_format.numerical_format = DONT_CARE_NUMERICAL_FORMAT;
+ device->frame_skip_num = 0;
+ break;
+ default:
+ ioh_err(dev->video_in_dev, "Not supported sensor detected");
+ return -ENODEV;
+ }
+ ret = ioh_video_in_set_input_format(device, input_format);
+ if (ret != 0)
+ return -ENODEV;
+
+ /* output format setting for videoin */
+ output_format.format = YCBCR_422_8BIT;
+ output_format.numerical_format = DONT_CARE_NUMERICAL_FORMAT;
+ output_format.luminance_range = DONT_CARE_LUMINANNCE_RANGE;
+ output_format.rgb_gain_level = DONT_CARE_RGBLEV;
+ ret = ioh_video_in_set_output_format(device, output_format);
+ if (ret != 0)
+ return -ENODEV;
+
+ /* size setting for videoin */
+ frame_size.X_component = fmt->fmt.pix.width;
+ frame_size.Y_component = fmt->fmt.pix.height;
+ frame_size.pitch_size = fmt->fmt.pix.bytesperline;
+ ret = ioh_video_in_set_size(device, frame_size);
+ if (ret != 0)
+ return -ENODEV;
+
+ ioh_dbg(dev->video_in_dev, "%s X=%d[pix], Y=%d[pix], "
+ "pitch_size=%d[byte]", __func__,
+ frame_size.X_component, frame_size.Y_component,
+ frame_size.pitch_size);
+
+ return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct ioh_vin_fh *fh = priv;
+ struct videobuf_queue *q = &fh->vb_vidq;
+ struct ioh_vin_dev *dev = fh->dev;
+ struct v4l2_mbus_framefmt mbus_fmt;
+ struct ioh_vin_fmt *f;
+ int ret;
+
+ ioh_dbg(dev->video_in_dev, "%s start", __func__);
+
+ f = get_format(fmt);
+
+ ret = vidioc_try_fmt_vid_cap(file, fh, fmt);
+
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&q->vb_lock);
+
+ fh->fmt = get_format(fmt);
+ fh->pix_format = fmt->fmt.pix;
+ fh->vb_vidq.field = fmt->fmt.pix.field;
+
+ v4l2_fill_mbus_format(&mbus_fmt, &fh->pix_format, fh->fmt->mbus_code);
+
+ ret = sensor_call(dev, video, s_mbus_fmt, &mbus_fmt);
+ if (ret != 0)
+ goto out;
+
+ ret = ioh_video_in_setting_s_fmt(dev, fmt);
+ if (ret != 0)
+ goto out;
+
+out:
+ mutex_unlock(&q->vb_lock);
+
+ ioh_dbg(dev->video_in_dev, "%s ended(%d)", __func__, ret);
+
+ return ret;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *p)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ return videobuf_reqbufs(&fh->vb_vidq, p);
+}
+
+static int vidioc_querybuf(struct file *file,
+ void *priv, struct v4l2_buffer *p)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ return videobuf_querybuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ return videobuf_qbuf(&fh->vb_vidq, p);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ return videobuf_dqbuf(&fh->vb_vidq, p,
+ file->f_flags & O_NONBLOCK);
+}
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
+}
+#endif
+
+static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (i != fh->type)
+ return -EINVAL;
+ /* -- */
+ {
+ int retval;
+ struct BT656_device *device;
+ device = fh->dev->video_in_dev;
+
+ retval = ioh_video_in_cap_start(device);
+ if (retval != IOH_VIDEOIN_SUCCESS)
+ return -EINVAL;
+ }
+ /* -- */
+ return videobuf_streamon(&fh->vb_vidq);
+}
+
+static int vidioc_streamoff(struct file *file,
+ void *priv, enum v4l2_buf_type i)
+{
+ struct ioh_vin_fh *fh = priv;
+
+ if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (i != fh->type)
+ return -EINVAL;
+ /* -- */
+ {
+ struct BT656_device *device;
+ device = fh->dev->video_in_dev;
+
+ ioh_video_in_cap_stop(device);
+ }
+ /* -- */
+ return videobuf_streamoff(&fh->vb_vidq);
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
+{
+ return 0;
+}
+
+/* only one input in this driver */
+static int vidioc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ /* -- */
+ if (inp->index != 0)
+ return -EINVAL;
+ /* -- */
+
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ inp->std = V4L2_STD_NTSC_M;
+ sprintf(inp->name, "Camera %u", inp->index);
+
+ return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ if (i != 0)
+ return -EINVAL;
+ return 0;
+}
+
+ /* --- controls ---------------------------------------------- */
+static int vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ struct ioh_vin_fh *fh = priv;
+ struct ioh_vin_dev *dev = fh->dev;
+ int ret;
+
+ ret = sensor_call(dev, core, queryctrl, qc);
+ return ret;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct ioh_vin_fh *fh = priv;
+ struct ioh_vin_dev *dev = fh->dev;
+ int ret;
+
+ ret = sensor_call(dev, core, g_ctrl, ctrl);
+ return ret;
+}
+static int vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct ioh_vin_fh *fh = priv;
+ struct ioh_vin_dev *dev = fh->dev;
+ int ret;
+
+ ret = sensor_call(dev, core, s_ctrl, ctrl);
+ return ret;
+}
+
+/* ------------------------------------------------------------------
+ File operations for the device
+ ------------------------------------------------------------------*/
+
+static int ioh_vin_v4l2_open(struct file *file)
+{
+ struct ioh_vin_dev *dev = video_drvdata(file);
+ struct ioh_vin_fh *fh = NULL;
+ int retval = 0;
+
+ ioh_dbg(dev->video_in_dev, "%s start", __func__);
+
+ mutex_lock(&dev->mutex);
+ dev->users++;
+
+ if (dev->users > 1) {
+ dev->users--;
+ mutex_unlock(&dev->mutex);
+ return -EBUSY;
+ }
+
+ ioh_info(dev->video_in_dev, "open %s type=%s users=%d\n",
+ video_device_node_name(dev->vfd),
+ v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users);
+
+ /* allocate + initialize per filehandle data */
+ fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+ if (NULL == fh) {
+ ioh_err(dev->video_in_dev, "In %s -> "
+ "kzalloc failed", __func__);
+ dev->users--;
+ retval = -ENOMEM;
+ }
+
+ if (retval) {
+ mutex_unlock(&dev->mutex);
+ return retval;
+ }
+
+ file->private_data = fh;
+ fh->dev = dev;
+
+ fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ fh->fmt = &formats[0];
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ dev->active_frm = NULL;
+ dev->vidq_status = IOH_VIDEO_IN_VIDQ_IDLE;
+
+ videobuf_queue_dma_contig_init(&fh->vb_vidq, &ioh_vin_video_qops,
+ NULL, &dev->slock, fh->type, V4L2_FIELD_ANY,
+ sizeof(struct ioh_vin_buffer), fh,
+ NULL);
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ videobuf_queue_vmalloc_init(&fh->vb_vidq, &ioh_vin_video_qops,
+ NULL, &dev->slock, fh->type, V4L2_FIELD_ANY,
+ sizeof(struct ioh_vin_buffer), fh,
+ NULL);
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* -- */
+ retval = ioh_video_in_open(dev);
+ mutex_unlock(&dev->mutex);
+ if (retval < 0)
+ return -1;
+
+ /* -- */
+
+ return 0;
+}
+
+static ssize_t
+ioh_vin_v4l2_read(struct file *file, char __user *data, size_t count,
+ loff_t *ppos)
+{
+ struct ioh_vin_fh *fh = file->private_data;
+
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+ return videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0,
+ file->f_flags & O_NONBLOCK);
+ }
+ return 0;
+}
+
+static unsigned int
+ioh_vin_v4l2_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct ioh_vin_fh *fh = file->private_data;
+ struct ioh_vin_dev *dev = fh->dev;
+ struct videobuf_queue *q = &fh->vb_vidq;
+ unsigned int ret;
+
+ ioh_dbg(dev->video_in_dev, "%s\n", __func__);
+
+ if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+ return POLLERR;
+
+ ret = videobuf_poll_stream(file, q, wait);
+
+ ioh_dbg(dev->video_in_dev, "%s ret=0x%04x\n", __func__, ret);
+
+ return ret;
+}
+
+static int ioh_vin_v4l2_close(struct file *file)
+{
+ struct ioh_vin_fh *fh = file->private_data;
+ struct ioh_vin_dev *dev = fh->dev;
+ struct video_device *vdev = video_devdata(file);
+
+ ioh_dbg(dev->video_in_dev, "%s", __func__);
+
+ mutex_lock(&dev->mutex);
+
+ ioh_video_in_close(dev);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ dev->active_frm = NULL;
+ dev->vidq_status = IOH_VIDEO_IN_VIDQ_IDLE;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ videobuf_stop(&fh->vb_vidq);
+ videobuf_mmap_free(&fh->vb_vidq);
+
+ kfree(fh);
+
+ dev->users--;
+
+ ioh_info(dev->video_in_dev, "close called (dev=%s, users=%d)\n",
+ video_device_node_name(vdev), dev->users);
+
+ mutex_unlock(&dev->mutex);
+
+ return 0;
+}
+
+static int ioh_vin_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct ioh_vin_fh *fh = file->private_data;
+ struct ioh_vin_dev *dev = fh->dev;
+ int ret;
+
+ ioh_dbg(dev->video_in_dev, "mmap called, vma=0x%08lx\n",
+ (unsigned long)vma);
+
+ ret = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+
+ ioh_dbg(dev->video_in_dev, "vma start=0x%08lx, size=%ld, ret=%d\n",
+ (unsigned long)vma->vm_start,
+ (unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
+ ret);
+
+ return ret;
+}
+
+static long ioh_vin_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ioh_vin_dev *dev = video_drvdata(file);
+ long ret;
+
+ mutex_lock(&dev->mutex);
+
+ ret = video_ioctl2(file, cmd, arg);
+
+ mutex_unlock(&dev->mutex);
+
+ return ret;
+}
+
+static const struct v4l2_file_operations ioh_vin_fops = {
+ .owner = THIS_MODULE,
+ .open = ioh_vin_v4l2_open,
+ .release = ioh_vin_v4l2_close,
+ .read = ioh_vin_v4l2_read,
+ .poll = ioh_vin_v4l2_poll,
+ .unlocked_ioctl = ioh_vin_ioctl,
+ .mmap = ioh_vin_mmap,
+};
+
+static const struct v4l2_ioctl_ops ioh_vin_ioctl_ops = {
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_enum_input = vidioc_enum_input,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+ .vidiocgmbuf = vidiocgmbuf,
+#endif
+ .vidioc_default = ioh_video_in_ioctl,
+};
+
+static struct video_device ioh_vin_template = {
+ .name = "ioh_vin",
+ .fops = &ioh_vin_fops,
+ .ioctl_ops = &ioh_vin_ioctl_ops,
+ .release = video_device_release_empty,
+
+ .tvnorms = V4L2_STD_NTSC_M,
+ .current_norm = V4L2_STD_NTSC_M,
+};
+
+/* -----------------------------------------------------------------
+ Initialization and module stuff
+ ------------------------------------------------------------------*/
+
+static int __devexit ioh_vin_remove(struct ioh_vin_dev *dev)
+{
+ v4l2_info(&dev->v4l2_dev, "V4L2 device unregistering %s\n",
+ video_device_node_name(dev->vfd));
+ video_unregister_device(dev->vfd);
+ v4l2_device_unregister(&dev->v4l2_dev);
+
+ ioh_dbg(dev->video_in_dev, "Function %s ended", __func__);
+
+ return 0;
+}
+
+static int __devinit
+ioh_video_in_subdev_open(struct ioh_vin_dev *dev)
+{
+ int ret = 0;
+ struct i2c_adapter *adap;
+ static unsigned short addrs[] = {
+ OV7620_ADDR,
+ OV9653_ADDR,
+ ML86V76651_ADDR,
+ NCM13J_ADDR,
+ I2C_CLIENT_END
+ };
+
+ adap = i2c_get_adapter(0);
+ dev->sensor = v4l2_i2c_new_subdev(&dev->v4l2_dev, adap,
+ "ioh_i2c", 0, addrs);
+ if (!dev->sensor) {
+ ioh_err(dev->video_in_dev, "%s "
+ "v4l2_i2c_new_subdev failed\n", __func__);
+ ret = -ENODEV;
+ }
+ return ret;
+}
+
+static int __devinit
+ioh_vin_dev_initialize(struct ioh_vin_dev *dev)
+{
+ struct video_device *vfd;
+ int ret;
+
+ snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name),
+ "%s", IOH_VIN_DRV_NAME);
+ ret = v4l2_device_register(NULL, &dev->v4l2_dev);
+ if (ret)
+ goto ini_ret;
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&dev->vidq_active);
+
+ ret = ioh_video_in_subdev_open(dev);
+ if (ret < 0)
+ goto unreg_dev;
+
+ ret = -ENOMEM;
+ vfd = video_device_alloc();
+ if (!vfd)
+ goto unreg_dev;
+
+ *vfd = ioh_vin_template;
+
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
+ if (ret < 0)
+ goto rel_vdev;
+
+ video_set_drvdata(vfd, dev);
+
+ if (video_nr >= 0)
+ video_nr++;
+
+ dev->vfd = vfd;
+ v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n",
+ video_device_node_name(vfd));
+
+ return 0;
+
+rel_vdev:
+ video_device_release(vfd);
+unreg_dev:
+ v4l2_device_unregister(&dev->v4l2_dev);
+ini_ret:
+ return ret;
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ struct pch_dma_slave *param = slave;
+
+ if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
+ chan->device->dev)) {
+ chan->private = param;
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static void ioh_request_dma(struct BT656_device *device)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct pci_dev *dma_dev;
+ struct pch_dma_slave *param;
+ struct BT656_device *priv = device;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ if (priv->ioh_type == ML7213_IOH)
+ dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+ information */
+ else if (priv->ioh_type == ML7223_IOH)
+ dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xc, 0)); /* Get DMA's dev
+ information */
+
+ /* Set Tx DMA */
+ param = &priv->param_dma;
+ param->dma_dev = &dma_dev->dev;
+ param->width = PCH_DMA_WIDTH_4_BYTES;
+
+ if (priv->ioh_type == ML7213_IOH)
+ param->chan_id = 6; /* ch2 */
+ else if (priv->ioh_type == ML7223_IOH)
+ param->chan_id = 2; /* ch6 */
+
+ param->tx_reg = (unsigned int)NULL;
+ param->rx_reg = device->physical_address + IOH_VIDEO_IN_VDATA;
+
+ chan = dma_request_channel(mask, filter, param);
+ if (!chan) {
+ ioh_err(device, "In %s -> dma_request_channel failed",
+ __func__);
+ return;
+ }
+ priv->chan_dma = chan;
+
+ ioh_dbg(device, "Function %s ended", __func__);
+ return;
+}
+
+static void ioh_free_dma(struct BT656_device *device)
+{
+ struct BT656_device *priv = device;
+ int retval;
+
+ if (priv->chan_dma) {
+
+ retval = priv->chan_dma->device->device_control(priv->chan_dma,
+ DMA_TERMINATE_ALL, 0);
+ ioh_dbg(device, "In %s -> device_control returned(%d)",
+ __func__, retval);
+
+ dma_release_channel(priv->chan_dma);
+ priv->chan_dma = NULL;
+ }
+
+ ioh_dbg(device, "Function %s ended", __func__);
+ return;
+}
+
+/* ---- MAIN ---- */
+
+static int ioh_video_in_open(struct ioh_vin_dev *dev)
+{
+ int retval;
+ struct BT656_device *device;
+
+ /* Attaining the device specific structure. */
+ device = dev->video_in_dev;
+
+ if (true == device->suspend_flag) {
+ retval = -EAGAIN;
+ ioh_err(device, "In %s -> The device is in suspend mode(%d)",
+ __func__, retval);
+ goto out;
+ }
+
+ /* Device already in use. */
+ if (true == device->open_flag) {
+ retval = -EBUSY;
+ ioh_err(device, "In %s -> Device already opened(%d)",
+ __func__, retval);
+ goto out;
+ }
+ /* Device not in use. */
+
+ spin_lock(&(device->dev_lock));
+
+ iowrite32(ASSERT_RESET, device->base_address + IOH_VIDEO_IN_RESET);
+
+ iowrite32(DE_ASSERT_RESET, device->base_address + IOH_VIDEO_IN_RESET);
+
+ spin_unlock(&(device->dev_lock));
+
+ /* Allocating the DMA channel. */
+ device->chan_dma = NULL;
+ ioh_request_dma(device);
+ if (!device->chan_dma) {
+ retval = -EINVAL;
+ ioh_err(device, "In %s -> ioh_request_dma failed(%d)",
+ __func__, retval);
+ goto out;
+ }
+
+ /* Initializing the device variables and locks. */
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ init_waitqueue_head(&(device->vsync_wait_queue));
+ init_waitqueue_head(&(device->thread_sleep_queue));
+ device->vsync_waiting_flag = false;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ init_waitqueue_head(&(device->read_wait_queue));
+ init_waitqueue_head(&(device->thread_sleep_queue));
+
+ spin_lock_init(&(device->read_buffer_lock));
+ device->read_buffer = NULL;
+ device->read_wait_flag = false;
+
+ init_waitqueue_head(&(device->vsync_wait_queue));
+ device->vsync_waiting_flag = false;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* Registering the interrupt handler. */
+ retval = request_irq(device->irq,
+ ioh_video_in_interrupt,
+ IRQF_SHARED, IOH_VIN_DRV_NAME,
+ (void *)dev);
+ if (0 != retval) {
+ ioh_err(device, "In %s -> request_irq failed(%d)",
+ __func__, retval);
+ goto out_free_dma;
+ }
+
+ device->thread_sleep_flag = true;
+ device->thread_exit_flag = false;
+ device->overflow_flag = false;
+ device->dma_flag = -1;
+
+ /* Creating the video capturing thread. */
+ if (NULL ==
+ (kthread_run(ioh_video_in_thread_fn, (void *)dev,
+ IOH_VIDEOIN_THREAD_NAME))) {
+ retval = -EIO;
+ ioh_err(device, "In %s -> kthread_run failed(%d)",
+ __func__, retval);
+ goto out_free_irq;
+ }
+
+ msleep(SLEEP_DELAY);
+
+ /* Device hardware initialization. */
+ retval = ioh_video_in_init(device);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ ioh_err(device, "In %s -> ioh_video_in_init failed(%d)",
+ __func__, retval);
+ goto out_thread_exit;
+ }
+
+ /* setting the open flag. */
+ device->open_flag = true;
+
+ retval = IOH_VIDEOIN_SUCCESS;
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+
+ /* If open failed. */
+out_thread_exit:
+ /* Stopping the video capturing thread. */
+ device->thread_exit_flag = true;
+ wake_up(&(device->thread_sleep_queue));
+
+out_free_irq:
+ /* Un-registering the interrupt handler. */
+ free_irq(device->irq, (void *)dev);
+
+out_free_dma:
+ /* Freeing the DMA channel. */
+ ioh_free_dma(device);
+
+out:
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+}
+
+static int ioh_video_in_close(struct ioh_vin_dev *dev)
+{
+ struct BT656_device *device = dev->video_in_dev;
+
+ /* Attaining the device specific structure. */
+
+ if (true == device->open_flag) {
+
+ /* Stopping the kernel thread if running. */
+ device->thread_exit_flag = true;
+ wake_up(&(device->thread_sleep_queue));
+
+ msleep(SLEEP_DELAY);
+
+ /* De-initializing the device hardware. */
+ ioh_video_in_exit(device);
+
+ /* Un-registering the interrupt handler. */
+ free_irq(device->irq, (void *)dev);
+
+ /* Freeing the DMA channel. */
+ ioh_free_dma(device);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ /* Re-setting the read buffer pointer. */
+ device->read_buffer = NULL;
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* Re-setting the open flag variable. */
+ device->open_flag = false;
+ }
+
+ ioh_dbg(device, "Function %s ended", __func__);
+
+ return IOH_VIDEOIN_SUCCESS;
+}
+
+static long ioh_video_in_ioctl(struct file *p_file, void *priv,
+ int command, void *param)
+{
+ int retval = -EAGAIN;
+ struct ioh_vin_fh *fh = priv;
+ struct ioh_vin_dev *dev = fh->dev;
+ struct BT656_device *device = dev->video_in_dev;
+ /* Attaining the device specific structure. */
+
+ if (true == device->suspend_flag) {
+ ioh_err(device, "In %s -> The device is in suspend mode",
+ __func__);
+ goto out;
+ }
+
+ /* if not suspend. */
+ switch (command) {
+ /* For setting input format. */
+ case IOH_VIDEO_SET_INPUT_FORMAT:
+ {
+ struct ioh_video_in_input_format format;
+ memcpy((void *)&format, (void *)param, sizeof(format));
+ retval = ioh_video_in_set_input_format(device, format);
+ }
+ break;
+
+ /* For getting input format. */
+ case IOH_VIDEO_GET_INPUT_FORMAT:
+ {
+ struct ioh_video_in_input_format format;
+ format = ioh_video_in_get_input_format(device);
+ memcpy((void *)param, (void *)&format, sizeof(format));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the output format. */
+ case IOH_VIDEO_SET_OUTPUT_FORMAT:
+ {
+ struct ioh_video_in_output_format format;
+ memcpy((void *)&format, (void *)param, sizeof(format));
+ retval = ioh_video_in_set_output_format(device,
+ format);
+ }
+ break;
+
+ /* For getting the output format. */
+ case IOH_VIDEO_GET_OUTPUT_FORMAT:
+ {
+ struct ioh_video_in_output_format format;
+ format = ioh_video_in_get_output_format(device);
+ memcpy((void *)param, (void *)&format, sizeof(format));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the frame size. */
+ case IOH_VIDEO_SET_SIZE:
+ {
+ struct ioh_video_in_frame_size frame_size;
+ memcpy((void *)&frame_size, (void *)param,
+ sizeof(frame_size));
+ retval = ioh_video_in_set_size(device, frame_size);
+ }
+ break;
+
+ /* For getting the frame size. */
+ case IOH_VIDEO_GET_SIZE:
+ {
+ struct ioh_video_in_frame_size frame_size;
+ frame_size = ioh_video_in_get_size(device);
+ memcpy((void *)param, (void *)&frame_size,
+ sizeof(frame_size));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the scan mode conversion method. */
+ case IOH_VIDEO_SET_IP_TRANS:
+ {
+ enum ioh_video_in_scan_mode_method scan_mode;
+ memcpy((void *)&scan_mode, (void *)param,
+ sizeof(scan_mode));
+ retval = ioh_video_in_set_ip_trans(device, scan_mode);
+ }
+ break;
+
+ /* For getting the scan mode conversion method. */
+ case IOH_VIDEO_GET_IP_TRANS:
+ {
+ enum ioh_video_in_scan_mode_method scan_mode;
+ scan_mode = ioh_video_in_get_ip_trans(device);
+ memcpy((void *)param, (void *)&scan_mode,
+ sizeof(scan_mode));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the luminance level settings. */
+ case IOH_VIDEO_SET_LUMINENCE_LEVEL:
+ {
+ struct ioh_video_in_luminance_settings
+ luminance_settings;
+ memcpy((void *)&luminance_settings, (void *)param,
+ sizeof(luminance_settings));
+ retval = ioh_video_in_set_luminance_level(device,
+ luminance_settings);
+ }
+ break;
+
+ /* For getting the luminance level settings. */
+ case IOH_VIDEO_GET_LUMINENCE_LEVEL:
+ {
+ struct
+ ioh_video_in_luminance_settings luminance_settings;
+ luminance_settings =
+ ioh_video_in_get_luminance_level(device);
+ memcpy((void *)param, (void *)&luminance_settings,
+ sizeof(luminance_settings));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the RGB gain settings. */
+ case IOH_VIDEO_SET_RGB_GAIN:
+ {
+ struct ioh_video_in_rgb_gain_settings rgb_settings;
+ memcpy((void *)&rgb_settings, (void *)param,
+ sizeof(rgb_settings));
+ retval = ioh_video_in_set_rgb_gain(device,
+ rgb_settings);
+ }
+ break;
+
+ /* For getting the RGB gain settings. */
+ case IOH_VIDEO_GET_RGB_GAIN:
+ {
+ struct ioh_video_in_rgb_gain_settings rgb_settings;
+ rgb_settings = ioh_video_in_get_rgb_gain(device);
+ memcpy((void *)param, (void *)&rgb_settings,
+ sizeof(rgb_settings));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For initiating the video capturing process. */
+ case IOH_VIDEO_CAP_START:
+ retval = ioh_video_in_cap_start(device);
+ break;
+
+ /* For stopping the video capturing process. */
+ case IOH_VIDEO_CAP_STOP:
+ ioh_video_in_cap_stop(device);
+ retval = IOH_VIDEOIN_SUCCESS;
+
+ break;
+
+ /* For setting the blanking signal timing settings. */
+ case IOH_VIDEO_SET_BLANK_TIM:
+ {
+ struct ioh_video_in_blank_tim_settings blank_tim;
+ memcpy((void *)&blank_tim, (void *)param,
+ sizeof(blank_tim));
+ retval = ioh_video_in_set_blank_tim(device, blank_tim);
+ }
+ break;
+
+ /* For getting the blanking signal timing settings. */
+ case IOH_VIDEO_GET_BLANK_TIM:
+ {
+ struct ioh_video_in_blank_tim_settings blank_tim;
+ blank_tim = ioh_video_in_get_blank_tim(device);
+ memcpy((void *)param, (void *)&blank_tim,
+ sizeof(blank_tim));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the blue background mode. */
+ case IOH_VIDEO_SET_BB:
+ {
+ enum ioh_video_in_bb_mode bb_mode;
+ memcpy((void *)&bb_mode, (void *)param,
+ sizeof(bb_mode));
+ retval = ioh_video_in_set_bb(device, bb_mode);
+ }
+ break;
+
+ /* For getting the blue background mode. */
+ case IOH_VIDEO_GET_BB:
+ {
+ enum ioh_video_in_bb_mode bb_mode;
+ bb_mode = ioh_video_in_get_bb(device);
+ memcpy((void *)param, (void *)&bb_mode,
+ sizeof(bb_mode));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For setting the color bar mode. */
+ case IOH_VIDEO_SET_CB:
+ {
+ struct ioh_video_in_cb_settings cb_settings;
+ memcpy((void *)&cb_settings, (void *)param,
+ sizeof(cb_settings));
+ retval = ioh_video_in_set_cb(device, cb_settings);
+ }
+ break;
+
+ /* For getting the color bar mode. */
+ case IOH_VIDEO_GET_CB:
+ {
+ struct ioh_video_in_cb_settings cb_settings;
+ cb_settings = ioh_video_in_get_cb(device);
+ memcpy((void *)param, (void *)&cb_settings,
+ sizeof(cb_settings));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For getting the buffer size. */
+ case IOH_VIDEO_GET_BUFFER_SIZE:
+ {
+ unsigned long buffer_size;
+ buffer_size = ioh_video_in_get_buffer_size(device);
+ memcpy((void *)param, (void *)&buffer_size,
+ sizeof(buffer_size));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+ break;
+
+ /* For getting the frame buffer info. */
+ case IOH_VIDEO_GET_FRAME_BUFFERS:
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ ioh_err(device, "In %s -> Invalid ioctl command", __func__);
+ retval = -EINVAL;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ {
+ struct ioh_video_in_frame_buffers buffers;
+ buffers = ioh_video_in_get_frame_buffers(device);
+ memcpy((void *)param, (void *)&buffers,
+ sizeof(buffers));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+ break;
+
+ /* For reading the frame buffer. */
+ case IOH_VIDEO_READ_FRAME_BUFFER:
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+ ioh_err(device, "In %s -> Invalid ioctl command", __func__);
+ retval = -EINVAL;
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ {
+ struct ioh_video_in_frame_buffer buffer;
+ buffer = ioh_video_in_read_frame_buffer(device);
+ memcpy((void *)param, (void *)&buffer, sizeof(buffer));
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+ break;
+
+ default:
+ ioh_err(device, "In %s -> Invalid ioctl command", __func__);
+ retval = -EINVAL;
+ break;
+
+ }
+ /* End of switch */
+out:
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+ return retval;
+}
+
+/* ---- PCI ---- */
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+static int __devinit
+ioh_video_in_set_frame_buffer(struct BT656_device *device)
+{
+ struct ioh_video_in_frame_buffer_info info;
+ int retval;
+
+ if (n_frame_buf < MIN_N_FRAME_BUF)
+ n_frame_buf = MIN_N_FRAME_BUF;
+ if (n_frame_buf > MAX_N_FRAME_BUF)
+ n_frame_buf = MAX_N_FRAME_BUF;
+
+ info.buffer_num = n_frame_buf;
+ info.order = ALLOC_ORDER;
+
+ retval = ioh_video_in_alloc_frame_buffer(device, info);
+
+ if (retval != IOH_VIDEOIN_SUCCESS) {
+ ioh_err(device, "In %s -> "
+ "ioh_video_in_alloc_frame_buffer failed(%d)",
+ __func__, retval);
+ goto out;
+ }
+
+out:
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+ return retval;
+}
+static int __devexit ioh_video_in_clr_frame_buffer(struct BT656_device *device)
+{
+ struct ioh_video_in_frame_buffer_info info;
+ int retval;
+
+ info.buffer_num = n_frame_buf;
+ info.order = ALLOC_ORDER;
+
+ retval = ioh_video_in_free_frame_buffer(device, info);
+
+ if (retval != IOH_VIDEOIN_SUCCESS) {
+ ioh_err(device, "In %s -> "
+ "ioh_video_in_free_frame_buffer failed(%d)",
+ __func__, retval);
+ goto out;
+ }
+out:
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+ return retval;
+}
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+static int __devinit
+ioh_video_in_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int retval;
+ void __iomem *base_address = NULL;
+ u32 physical_address = 0;
+ struct BT656_device *device = NULL;
+ struct ioh_vin_dev *dev = NULL;
+
+ /* Enabling the PCI device. */
+ retval = pci_enable_device(pdev);
+ if (0 != retval) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "pci_enable_device failed (%d)",
+ __func__, retval);
+ goto out;
+ }
+
+ /* Setting the device as the PCI master. */
+ pci_set_master(pdev);
+
+ /* Obtaining the physical address for further DMA use. */
+ physical_address = pci_resource_start(pdev, 1);
+ if (0 == physical_address) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "Cannot obtain the physical address",
+ __func__);
+ retval = -ENOMEM;
+ goto out_pcidev;
+ }
+
+ /* Remapping the entire device regions to the kernel space memory. */
+ base_address = pci_iomap(pdev, 1, 0);
+ if (base_address == NULL) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "pci_iomap failed(0x%08x)",
+ __func__, (u32) base_address);
+ retval = -ENOMEM;
+ goto out_pcidev;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "kzalloc(dev) failed", __func__);
+ retval = -ENOMEM;
+ goto out_iounmap;
+ }
+
+ device = kzalloc(sizeof(*device), GFP_KERNEL);
+ if (!device) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "kzalloc(device) failed", __func__);
+ retval = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ /* initialize locks */
+ spin_lock_init(&dev->slock);
+ mutex_init(&dev->mutex);
+
+ mutex_lock(&dev->mutex);
+
+ dev->video_in_dev = device;
+
+ /* Filling in the device specific data structure fields. */
+ spin_lock_init(&device->dev_lock);
+
+ device->base_address = base_address;
+ device->physical_address = physical_address;
+
+ device->p_device = pdev;
+ device->irq = pdev->irq;
+
+ device->suspend_flag = false;
+ device->open_flag = false;
+ device->frame_skip_num = 0;
+
+ if (id->device == PCI_DEVICE_ID_IVI_VIDEOIN)
+ device->ioh_type = ML7213_IOH;
+ else
+ device->ioh_type = ML7223_IOH;
+
+ /* Saving the device structure for further use. */
+ pci_set_drvdata(pdev, dev);
+
+ retval = ioh_vin_dev_initialize(dev);
+ if (0 != retval) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "ioh_vin_dev_initialize failed(%d)",
+ __func__, retval);
+ mutex_unlock(&dev->mutex);
+ goto out_free_device;
+ }
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ retval = ioh_video_in_set_frame_buffer(device);
+ if (IOH_VIDEOIN_SUCCESS != retval) {
+ printk(KERN_ERR "ioh_video_in : In %s "
+ "iioh_video_in_set_frame_buffer failed(%d)",
+ __func__, retval);
+ mutex_unlock(&dev->mutex);
+ goto out_free_device;
+ }
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ retval = IOH_VIDEOIN_SUCCESS; /* Probe Successful */
+
+ mutex_unlock(&dev->mutex);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+
+ return retval;
+
+ /* Releasing all the registered components
+ if probe is not successful. */
+out_free_device:
+ /* Free the device memory */
+ kfree(device);
+out_free_dev:
+ kfree(dev);
+out_iounmap:
+ /* Un-mapping the remapped memory regions. */
+ pci_iounmap(pdev, base_address);
+out_pcidev:
+ /* Disabling the PCI device. */
+ pci_disable_device(pdev);
+out:
+ printk(KERN_DEBUG "Function %s ended(%d)", __func__, retval);
+ return retval;
+}
+
+static void __devexit ioh_video_in_pci_remove(struct pci_dev *pdev)
+{
+ struct ioh_vin_dev *dev;
+ struct BT656_device *device;
+
+ /* Obtaining the associated device structure. */
+ dev = (struct ioh_vin_dev *)pci_get_drvdata(pdev);
+
+ mutex_lock(&dev->mutex);
+
+ device = dev->video_in_dev;
+
+ ioh_vin_remove(dev);
+
+#ifdef IOH_VIDEO_IN_DMA_CONTIG
+#else /* IOH_VIDEO_IN_DMA_CONTIG */
+ ioh_video_in_clr_frame_buffer(device);
+#endif /* IOH_VIDEO_IN_DMA_CONTIG */
+
+ /* Un-mapping the remapped device address. */
+ pci_iounmap(pdev, device->base_address);
+
+ /* Disabling the PCI device. */
+ pci_disable_device(pdev);
+
+ /* Resetting the driver data. */
+ pci_set_drvdata(pdev, NULL);
+
+ mutex_unlock(&dev->mutex);
+
+ kfree(dev);
+
+ kfree(device);
+}
+
+#ifdef CONFIG_PM
+static int ioh_video_in_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ struct ioh_vin_dev *dev;
+ struct BT656_device *device;
+
+ /* Obtaining the associated device structure. */
+ dev = (struct ioh_vin_dev *)pci_get_drvdata(pdev);
+
+ mutex_lock(&dev->mutex);
+
+ device = dev->video_in_dev;
+
+ /* Saving the current state */
+ retval = pci_save_state(pdev);
+
+ if (0 != retval) {
+ ioh_err(device, "In %s -> Function "
+ "pci_save_state failed(%d)", __func__, retval);
+ } else {
+ /* Setting flag for suspension. */
+ device->suspend_flag = true;
+
+ /* Disabling the interrupts if enabled. */
+ if (true == device->open_flag) {
+ /* Saving the current interrupt settings. */
+ device->video_settings.current_interrupt_settings =
+ device->intenb;
+
+ /* Disabling all the interrupts. */
+ spin_lock(&(device->dev_lock));
+ device->intenb.drevsem = VSYNC_NOT_SYNC;
+ device->intenb.dmarenb = DISABLE;
+ device->intenb.ofintenb = DISABLE;
+ device->intenb.hsintenb = DISABLE;
+ device->intenb.vsintenb = DISABLE;
+ write_intenb(device);
+
+ iowrite32(ASSERT_RESET,
+ device->base_address + IOH_VIDEO_IN_RESET);
+
+ iowrite32(DE_ASSERT_RESET,
+ device->base_address + IOH_VIDEO_IN_RESET);
+
+ spin_unlock(&(device->dev_lock));
+ }
+
+ /* Disabling the wake up */
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+
+ /* Putting the device to a new power state. */
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ /* Disabling the device. */
+ pci_disable_device(pdev);
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+
+ mutex_unlock(&dev->mutex);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+ return retval;
+}
+
+static int ioh_video_in_pci_resume(struct pci_dev *pdev)
+{
+ int retval = 0;
+ struct ioh_vin_dev *dev;
+ struct BT656_device *device;
+
+ /* Obtaining the associated device structure. */
+ dev = (struct ioh_vin_dev *)pci_get_drvdata(pdev);
+
+ mutex_lock(&dev->mutex);
+
+ device = dev->video_in_dev;
+
+ /* Setting the state to power on state. */
+ pci_set_power_state(pdev, PCI_D0);
+
+ /* Restoring the state. */
+ pci_restore_state(pdev);
+
+ /* Enabling the device. */
+ retval = pci_enable_device(pdev);
+ if (0 != retval) {
+ ioh_err(device, "In %s -> Function "
+ "pci_enable_device failed(%d)", __func__, retval);
+ } else {
+ /* Disabling wake up feature. */
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+
+ /* Setting the device as PCI bus master. */
+ pci_set_master(pdev);
+
+ /* If device is in use. */
+ if (true == device->open_flag) {
+ spin_lock(&(device->dev_lock));
+
+ iowrite32(ASSERT_RESET,
+ device->base_address + IOH_VIDEO_IN_RESET);
+
+ iowrite32(DE_ASSERT_RESET,
+ device->base_address + IOH_VIDEO_IN_RESET);
+
+ spin_unlock(&(device->dev_lock));
+
+ (void)ioh_video_in_set_input_format(device,
+ device->
+ video_settings.
+ current_input_format);
+ (void)ioh_video_in_set_output_format(device,
+ device->
+ video_settings.
+ current_output_format);
+ (void)ioh_video_in_set_ip_trans(device,
+ device->video_settings.
+ current_scan_mode_method);
+ (void)ioh_video_in_set_luminance_level(device,
+ device->
+ video_settings.
+ current_luminance_settings);
+ (void)ioh_video_in_set_rgb_gain(device,
+ device->video_settings.
+ current_rgb_gain_settings);
+ (void)ioh_video_in_set_blank_tim(device,
+ device->video_settings.
+ current_blank_tim_settings);
+ (void)ioh_video_in_set_bb(device,
+ device->video_settings.
+ current_bb_mode);
+ (void)ioh_video_in_set_cb(device,
+ device->video_settings.
+ current_cb_settings);
+
+ /* Re-enabling the interrupt settings. */
+ spin_lock(&(device->dev_lock));
+ device->intenb = device->video_settings.
+ current_interrupt_settings;
+ write_intenb(device);
+ spin_unlock(&(device->dev_lock));
+ }
+
+ /* Updating the suspend flag. */
+ device->suspend_flag = false;
+
+ retval = IOH_VIDEOIN_SUCCESS;
+ }
+
+ mutex_unlock(&dev->mutex);
+
+ ioh_dbg(device, "Function %s ended(%d)", __func__, retval);
+ return retval;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_device_id ioh_video_pcidev_id[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_IOH, PCI_DEVICE_ID_IVI_VIDEOIN)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IOH, PCI_DEVICE_ID_MP_VIDEOIN)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, ioh_video_pcidev_id);
+
+static struct pci_driver ioh_video_driver = {
+ .name = "ioh_video_in",
+ .id_table = ioh_video_pcidev_id,
+ .probe = ioh_video_in_pci_probe,
+ .remove = __devexit_p(ioh_video_in_pci_remove),
+#ifdef CONFIG_PM
+ .suspend = ioh_video_in_pci_suspend,
+ .resume = ioh_video_in_pci_resume,
+#endif
+};
+
+static int __init ioh_video_in_pci_init(void)
+{
+ int retval;
+
+ retval = pci_register_driver(&ioh_video_driver);
+
+ if (0 != retval) {
+ printk(KERN_ERR "ioh_video_in "
+ "pci_register_driver failed (%d).", retval);
+ }
+
+ return retval;
+}
+
+static void __exit ioh_video_in_pci_exit(void)
+{
+ pci_unregister_driver(&ioh_video_driver);
+}
+
+module_init(ioh_video_in_pci_init);
+module_exit(ioh_video_in_pci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IOH video-in PCI Driver");
+
diff --git a/drivers/media/video/ioh_video_in_main.h b/drivers/media/video/ioh_video_in_main.h
new file mode 100644
index 0000000..f907ece
--- /dev/null
+++ b/drivers/media/video/ioh_video_in_main.h
@@ -0,0 +1,1058 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __IOH_VIDEO_IN_H__
+#define __IOH_VIDEO_IN_H__
+
+/*! @defgroup VideoIn */
+
+/*! @defgroup Global
+ @ingroup VideoIn */
+/*! @defgroup PCILayer
+ @ingroup VideoIn */
+/*! @defgroup InterfaceLayer
+ @ingroup VideoIn */
+/*! @defgroup HALLayer
+ @ingroup VideoIn */
+/*! @defgroup Utilities
+ @ingroup VideoIn */
+
+/*! @defgroup PCILayerAPI
+ @ingroup PCILayer */
+/*! @defgroup PCILayerFacilitators
+ @ingroup PCILayer */
+
+/*! @defgroup InterfaceLayerAPI
+ @ingroup InterfaceLayer */
+/*! @defgroup InterfaceLayerFacilitators
+ @ingroup InterfaceLayer */
+
+/*! @defgroup HALLayerAPI
+ @ingroup HALLayer */
+
+/*! @defgroup UtilitiesAPI
+ @ingroup Utilities */
+
+/*! @defgroup UtilitiesFacilitators
+ @ingroup Utilities */
+
+/* includes */
+#include <linux/ioctl.h>
+
+/* enumerators */
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_input_data_format
+ @brief Defines constants to denote the different supported
+ input format.
+ @remarks This enum defines unique constants to denote the
+ different input formats supported by the
+ BT656(VideoIn) device. These constants
+ can be used by the user to specify the input video
+ data format to
+ the driver while specifying the input settings.
+
+ @note The constants holds meaningful when used in
+ combination with other data
+ for setting input format.
+
+ @see
+ - ioh_video_in_set_input_format
+ - ioh_video_in_set_output_format
+ - ioh_video_in_input_format
+ */
+enum ioh_video_in_input_data_format {
+ /* Input format for Square Pixel frequency */
+ NT_SQPX_ITU_R_BT_656_4_8BIT, /**< NTSC Square Pixel
+ ITU-BT656-4 8Bit format. */
+ NT_SQPX_ITU_R_BT_656_4_10BIT, /**< NTSC Square Pixel
+ ITU-BT656-4 10Bit format. */
+ NT_SQPX_YCBCR_422_8BIT, /**< NTSC Square Pixel
+ YCbCr 4:2:2 8Bit format. */
+ NT_SQPX_YCBCR_422_10BIT, /**< NTSC Square Pixel
+ YCbCr 4:2:2 10Bit format. */
+
+ /* Input format for ITU-R BT.601 */
+ NT_BT601_ITU_R_BT_656_4_8BIT, /**< NTSC ITU-R BT.601
+ ITU-BT656-4 8Bit format. */
+ NT_BT601_ITU_R_BT_656_4_10BIT, /**< NTSC ITU-R BT.601
+ ITU-BT656-4 10Bit format. */
+ NT_BT601_YCBCR_422_8BIT, /**< NTSC ITU-R BT.601
+ YCbCr 4:2:2 8Bit format. */
+ NT_BT601_YCBCR_422_10BIT, /**< NTSC ITU-R BT.601
+ YCbCr 4:2:2 10Bit format. */
+
+ /* Input format for RAW. */
+ NT_RAW_8BIT, /**< NTSC RAW 8Bit format. */
+ NT_RAW_10BIT, /**< NTSC RAW 10Bit format. */
+ NT_RAW_12BIT, /**< NTSC RAW 12Bit format. */
+
+ /* Invalid Input Format. */
+ INVALID_INPUT_DATA_FORMAT /**< Invalid Input data format. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_numerical_format
+ @brief Defines constants indicating the different supported
+ input/output numerical format.
+ @remarks This enum defines unique constants to denote the
+ different numerical
+ format of the video data supported by the
+ BT656(VideoIn) device. These
+ constants can be used by the user to specify the
+ numerical format of
+ the video while specifying the input and output video
+ settings.
+ @note These constants holds meaningful when used along with
+ other data.
+
+ @see
+ - ioh_video_in_set_input_format
+ - ioh_video_in_set_output_format
+ - ioh_video_in_input_format
+ - ioh_video_in_output_format
+ */
+enum ioh_video_in_numerical_format {
+ OFFSET_BINARY_FORMAT, /**< Offset binary format. */
+ COMPLEMENTARY_FORMAT_OF_2, /**< Complementary format of 2. */
+ DONT_CARE_NUMERICAL_FORMAT, /**< Dont care. */
+ INVALID_NUMERICAL_FORMAT /**< Invalid numerical format. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_output_data_format
+ @brief Defines constants indicating the different supported
+ output formats.
+ @remarks This enum defines unique constants to denote the
+ different output video
+ data formats supported by the BT656(VideoIn) device.
+ These constants can
+ be used by the user to specify the output data format
+ while specifying the
+ output video settings.
+ @note The constants holds meaningful when used with other
+ data for setting output format.
+
+ @see
+ - ioh_video_in_set_output_format
+ - ioh_video_in_output_format
+ */
+enum ioh_video_in_output_data_format {
+ YCBCR_422_8BIT, /**< YCbCr 4:2:2 8bits format. */
+ YCBCR_422_10BIT, /**< YCbCr 4:2:2 10bits format. */
+ YCBCR_444_8BIT, /**< YCbCr 4:4:4 8bits format. */
+ YCBCR_444_10BIT, /**< YCbCr 4:4:4 10bits
+ fromat. */
+ RGB888, /**< RGB888 format. */
+ RGB666, /**< RGB666 format. */
+ RGB565, /**< RGB565 format. */
+ RAW_8BIT, /**< RAW 8bits format. */
+ RAW_10BIT, /**< RAW 10bits format. */
+ RAW_12BIT, /**< RAW 12bits format. */
+ INVALID_OUTPUT_DATA_FORMAT /**< Invalid output format. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_luminance_range
+ @brief Defines constants denoting the different supported
+ Luminance range.
+ @remarks This enum defines unique constants denoting the
+ luminance range
+ format format of the BT656(VideoIN) device. These
+ constants can
+ be used by the user to denote the luminance range
+ format while specifying the output format settings.
+
+ @note The constants holds meaningful when used with other
+ data for setting output format.
+
+ @see
+ - ioh_video_in_set_output_format
+ - ioh_video_in_output_format
+ */
+enum ioh_video_in_luminance_range {
+ BT601_LUMINANCE_RANGE = 0x00000000, /**< ITU BT.601
+ luminance range. */
+ EXTENDENDED_LUMINANCE_RANGE = 0x00000010, /**< Extended
+ luminance range. */
+ DONT_CARE_LUMINANNCE_RANGE = 0x00000011, /**< Dont care
+ luminance range. */
+ INVALID_LUMINANCE_RANGE = 0x000000FF /**< Invalid Luminance
+ range. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_rgb_gain_RGBLEV
+ @brief Defines constants denoting the different supported RGB
+ Level.
+ @remarks This enum defines unique constants denoting the RGB
+ level format
+ supported by the BT656(VideoIn device). These
+ constants can be used
+ by the user to denote the RGB Level setting while
+ specifying the output video settings.
+ @note The constants holds meaningful when used with other
+ data for setting output format.
+
+ @see
+ - ioh_video_in_set_output_format
+ - ioh_video_in_output_format
+ */
+enum ioh_video_in_rgb_gain_RGBLEV {
+ RGB_FULL_SCALE_MODE = 0x00000000, /**< Full scale mode
+ (0 - 1023). */
+ RGB_BT601_MODE = 0x00000008, /**< ITU BT.601 mode
+ (64 - 940). */
+ DONT_CARE_RGBLEV = 0x00000009, /**< Dont care RGB
+ Gain level. */
+ INVALID_RGB_GAIN_LEVEL = 0x000000FF /**< Invalid RGB gain
+ level. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_scan_mode_method
+ @brief Defines constants denoting the different supported
+ scan mode conversion methods.
+ @remarks This enum defines unique constants to denote the
+ different
+ interpolation methods supported by the BT656(VideoIn)
+ device.
+ These constants can be used by the user to specify the
+ scan mode conversion methods i.e. the format for
+ converting the Interlace
+ input data format to Progrssive output data format.
+
+ @see
+ - ioh_video_in_set_ip_trans_mode
+ - ioh_video_in_get_ip_trans_mode
+ */
+enum ioh_video_in_scan_mode_method {
+ LINE_INTERPOLATION = 0x00000000, /**< Line
+ Interpolation Method. */
+ LINE_DOUBLER = 0x00000040, /**< Line doubler method.
+ */
+ INVALID_SCAN_MODE_METHOD = 0x000000FF /**< Invalid scan mode
+ method. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_luminance_NOSIG
+ @brief Defines constants denoting the different supported
+ Luminance NOSIG setting mode.
+ @remarks This enum defines unique constants to denote the NOSIG
+ format supported by the BT656(VideoIn) device. These
+ constants can be used by the user to denote the NOSIG
+ settings while
+ specifying the luminance settings.
+ @note The constants holds meaningful when used with other
+ data
+ for setting luminance level.
+
+ @see
+ - ioh_video_in_set_luminance_level
+ - ioh_video_in_luminance_settings
+ */
+enum ioh_video_in_luminance_NOSIG {
+ NOSIG_NORMAL_MODE = 0x00000000, /**< Noramal mode. */
+ NOSIG_NOINMASTER_MODE = 0x00000080, /**< Image non input
+ master mode. */
+ INVALID_LUMINANCE_NOSIG = 0x000000FF /**< Invalid
+ luminance NOSIG mode. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_luminance_LUMLEV
+ @brief Defines constants denoting the different Luminance
+ level setting mode.
+ @remarks This enum defines unique constants to denote the
+ LUMLEV format supported by the BT656(VideoIn) device.
+ These constants can be used by the user to denote the
+ LUMLEV format while specifying the luminance settings.
+ @note The constants holds meaningful when used with other
+ data for setting the luminance level.
+
+ @see
+ - ioh_video_in_set_luminance_level
+ - ioh_video_in_luminance_settings
+ */
+enum ioh_video_in_luminance_LUMLEV {
+ LUMLEV_78_PERCENT = 0x00000000, /**< 78.125% */
+ LUMLEV_81_PERCENT, /**< 81.250% */
+ LUMLEV_84_PERCENT, /**< 84.375% */
+ LUMLEV_87_PERCENT, /**< 87.500% */
+ LUMLEV_90_PERCENT, /**< 90.625% */
+ LUMLEV_93_PERCENT, /**< 93.750% */
+ LUMLEV_96_PERCENT, /**< 96.875% */
+ LUMLEV_100_PERCENT, /**< 100.000% */
+ LUMLEV_103_PERCENT, /**< 103.125% */
+ LUMLEV_106_PERCENT, /**< 106.250% */
+ LUMLEV_109_PERCENT, /**< 109.375% */
+ LUMLEV_112_PERCENT, /**< 112.500% */
+ LUMLEV_115_PERCENT, /**< 115.625% */
+ LUMLEV_118_PERCENT, /**< 118.750% */
+ LUMLEV_121_PERCENT, /**< 121.875% */
+ LUMLEV_125_PERCENT, /**< 125.000% */
+ INVALID_LUMINANCE_LUMLEV /**< Invalid. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_blank_tim_CNTCTL
+ @brief Defines constants denoting the different supported
+ CNTCTL mode
+ settings for Blanking Timing Signal.
+ @remarks This enum defines unique constants to denote the
+ different
+ Blanking Signal Timing Control settings supported by
+ the BT656(VideoIn) device. These constants can be used
+ by the user while specifying the Blanking Timing Signal
+ settings.
+ @note The constants holds meaningful when use with other
+ data for setting the Blanking Timing Signal format.
+
+ @see
+ - ioh_video_in_set_blank_tim
+ - ioh_video_in_blank_tim_settings
+ */
+enum ioh_video_in_blank_tim_CNTCTL {
+ CNTCTL_STANDARD_SIGNAL = 0x00000000, /**< Standard
+ signal. */
+ CNTCTL_NON_STANDARD_SIGNAL = 0x00000080, /**< Non standard
+ signal. */
+ INVALID_BLANK_TIM_CNTCTL = 0x000000FF /**< Invalid Blank
+ tim settings. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_blank_tim_BLKADJ
+ @brief Defines constants for denoting the different supported
+ BLKADJ mode settings for Blanking Timing Signal.
+ @remarks This enum defines unique constants to denote the
+ different Blanking Signal Timing Adjustmemt settings
+ supported by the BT656(VideoIn) device.
+ These constants can be used by the
+ user while specifying the Blanking Timing Signal
+ settings.
+ @note The constants holds meaningful when use with other
+ data for setting the Blanking Timing Signal format.
+
+ @see
+ - ioh_video_in_set_blank_tim
+ - ioh_video_in_blank_tim_settings
+ */
+enum ioh_video_in_blank_tim_BLKADJ {
+ BLKADJ_MINUS_8_PIXEL = 0x00000000, /**< -8 pixel. */
+ BLKADJ_MINUS_7_PIXEL, /**< -7 pixel. */
+ BLKADJ_MINUS_6_PIXEL, /**< -6 pixel. */
+ BLKADJ_MINUS_5_PIXEL, /**< -5 pixel. */
+ BLKADJ_MINUS_4_PIXEL, /**< -4 pixel. */
+ BLKADJ_MINUS_3_PIXEL, /**< -3 pixel. */
+ BLKADJ_MINUS_2_PIXEL, /**< -2 pixel. */
+ BLKADJ_MINUS_1_PIXEL, /**< -1 pixel. */
+ BLKADJ_0_PIXEL, /**< 0 pixel. */
+ BLKADJ_PLUS_1_PIXEL, /**< +1 pixel. */
+ BLKADJ_PLUS_2_PIXEL, /**< +2 pixel. */
+ BLKADJ_PLUS_3_PIXEL, /**< +3 pixel. */
+ BLKADJ_PLUS_4_PIXEL, /**< +4 pixel. */
+ BLKADJ_PLUS_5_PIXEL, /**< +5 pixel. */
+ BLKADJ_PLUS_6_PIXEL, /**< +6 pixel. */
+ BLKADJ_PLUS_7_PIXEL, /**< +7 pixel. */
+ INVALID_BLANK_TIM_BLKADJ /**< Invalid. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_bb_mode
+ @brief Defines constants denoting the different supported
+ Blue background mode.
+ @remarks This enum defines unique constants to denote the
+ Blue Background On/Off settings. These constants
+ can be used by the user to enable/disable the
+ Blue background mode.
+ @note The constants holds meaningful when use with other
+ data for setting the Blue Background settings.
+
+ @see
+ - ioh_video_in_set_bb
+ - ioh_video_in_get_bb
+ */
+enum ioh_video_in_bb_mode {
+ BB_OUTPUT_OFF = 0x00000000, /**< Blue background OFF. */
+ BB_OUTPUT_ON = 0x00000040, /**< Blue background ON. */
+ INVALID_BB_MODE = 0x000000FF /**< Invalid BB mode. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_cb_mode
+ @brief Defines constants denoting the different supported
+ Color Bar mode.
+ @remarks This enum defines unique constants to denote the Color
+ bar On/Off settings. These constants can be used by the
+ user to enable/disable the Color Bar settings.
+ @note The constants holds meaningful when used with other
+ data for Color Bar settings.
+
+ @see
+ - ioh_video_in_set_cb
+ - ioh_video_in_cb_settings
+ */
+enum ioh_video_in_cb_mode {
+ CB_OUTPUT_OFF = 0x00000000, /**< Color Bar Mode OFF. */
+ CB_OUTPUT_ON = 0x00000080, /**< Color Bar Mode ON. */
+ INVALID_CB_MODE = 0x000000FF /**< Invalid CB mode. */
+};
+
+/*! @ingroup InterfaceLayer
+ @enum ioh_video_in_cb_OUTLEV
+ @brief Defines constants denoting the different supported
+ output level of the Color Bar.
+ @remarks This enum defines unique constants to denote the
+ Output Level format of the Color Bar settings
+ supported by the BT656(VideoIn) device.
+ These constants can be used by the user while
+ specifying the Color Bar settings.
+ @note The constants holds menaingful when used with other
+ data for Color Bar settings.
+
+ @see
+ - ioh_video_in_set_cb
+ - ioh_video_in_cb_settings
+ */
+enum ioh_video_in_cb_OUTLEV {
+ CB_OUTLEV_25_PERCENT = 0x00000000, /**< 25% Color bar. */
+ CB_OUTLEV_50_PERCENT, /**< 50% Color bar. */
+ CB_OUTLEV_75_PERCENT, /**< 75% Color bar. */
+ CB_OUTLEV_100_PERCENT, /**< 100% Color bar. */
+ INVALID_CB_OUTLEV /**< Invalid. */
+};
+
+/* structures */
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_input_format
+ @brief The structure used to specify settings of a particular
+ input format.
+ @remarks This structure defines the fields used to set/get the
+ input format settings of the BT656(VideoIn) device. The
+ user has to fill the individual fields with the unique
+ constants denoting the respective settings and pass on
+ to the driver through the respective ioctl calls.
+ @note The fields specify enum constants which are used to
+ specify the input format.
+
+ @see
+ - ioh_video_in_set_input_format
+ - ioh_video_in_get_input_format
+ */
+struct ioh_video_in_input_format {
+ /*Input format */
+ enum ioh_video_in_input_data_format format; /**< The input
+ video data format. */
+
+ /*IN2S Settings */
+ enum ioh_video_in_numerical_format numerical_format;
+ /**< The input
+ video numerical format. */
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_output_format
+ @brief Structures used to specify the settings of a
+ particular output format.
+ @remarks This structure defines the fileds used to set/get the
+ output format settings of the BT656(VideoIn) device.
+ The user has to fill the individual fields with the
+ unique constants denoting the respective settings and
+ pass on to the driver through the respective ioctl
+ calls.
+ @note The fields are constants denoting specific information
+ about the output format.
+
+ @see
+ - ioh_video_in_set_output_format
+ - ioh_video_in_get_output_format
+ */
+struct ioh_video_in_output_format {
+ /*Output data format */
+ enum ioh_video_in_output_data_format format;
+ /**< The output video data format. */
+
+ /*OUT2S Settings */
+ enum ioh_video_in_numerical_format numerical_format;
+ /**< The output video numerical format. */
+
+ /*SBON Settings */
+ enum ioh_video_in_luminance_range luminance_range;
+ /**< The luminance range format. */
+
+ /*RGBLEV Settings */
+ enum ioh_video_in_rgb_gain_RGBLEV rgb_gain_level;
+ /**< The RGB gain level format. */
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_luminance_settings
+ @brief Structure used to specify the settings for Luminance
+ level.
+ @remarks This structure defines the fields used to set/get the
+ luminanace settings of the BT656(VideoIn) device.
+ The user has to fill the individual fields with the
+ unique constants denoting the respective
+ settings and pass on to the driver through the
+ respective ioctl calls.
+ @note The fields are enum constants denoting the different
+ settings for luminance level.
+
+ @see
+ - ioh_video_in_set_luminance_level
+ - ioh_video_in_get_luminance_level
+ */
+struct ioh_video_in_luminance_settings {
+ enum ioh_video_in_luminance_NOSIG luminance_nosig;
+ /**< The NOSIG settings. */
+ enum ioh_video_in_luminance_LUMLEV luminance_lumlev;
+ /**< The LUMLEV settings. */
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_rgb_gain_settings
+ @brief Structure used to specify the RGB Gain level.
+ @remarks This structure defines the fields used to set/get the
+ RGB gain settings of the BT656(VideoIn) device.
+ The fields denotes the 8bit register values that has
+ to be filled in by the user and pass on to the driver
+ through the respective ioctl call for setting the RGB
+ gain settings.
+ @see
+ - ioh_video_in_set_rgb_gain
+ - ioh_video_in_get_rgb_gain
+ */
+struct ioh_video_in_rgb_gain_settings {
+ unsigned char r_gain; /**< R gain (Values should be
+ between 0-255). */
+ unsigned char g_gain; /**< G gain (Values should be
+ between 0-255). */
+ unsigned char b_gain; /**< B gain (Values should be
+ between 0-255). */
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_blank_tim_settings
+ @brief Structure used to specify the Blanking Timing Signal
+ Settings.
+ @remarks This structure defines the fields used to set/get the
+ Blanking Timing signal settings of the BT656(VideoIn)
+ device.
+ These fields have to be set by the user with unique
+ constants denoting the respective settings and pass
+ on to the driver through the respective ioctl calls.
+ @note The fields are enum constants denoting the different
+ settings of the Blanking Timing Signal.
+
+ @see
+ - ioh_video_in_set_blank_tim
+ - ioh_video_in_get_blank_tim
+ */
+struct ioh_video_in_blank_tim_settings {
+ enum ioh_video_in_blank_tim_CNTCTL blank_tim_cntctl;
+ /**< Blanking Timing Signal Control settings. */
+ enum ioh_video_in_blank_tim_BLKADJ blank_tim_blkadj;
+ /**< Blanking Timing Signal Adjustment settings.*/
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_cb_settings
+ @breif Structure used to specify the Color bar settings.
+ @remarks This structure defines the fields used to set/get the
+ Color Bar settings of the BT656(VideoIn) device. These
+ fields have to be set by the user with unique constants
+ denoting the respective settings and pass on to the
+ driver through the respective ioctl calls.
+ @note The fields are enum constants denoting the different
+ Color Bar formats.
+
+ @see
+ - ioh_video_in_set_cb
+ - ioh_video_in_get_cb
+ */
+struct ioh_video_in_cb_settings {
+ enum ioh_video_in_cb_mode cb_mode;
+ /**< Color Bar ON/OFF mode. */
+ enum ioh_video_in_cb_OUTLEV cb_outlev;
+ /**< Color Bar Otput level settings. */
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_frame_size
+ @breif Structure used to specify the framew size settings.
+ @remarks This structure defines the fields used to set/get the
+ frame size settings of the BT656(VideoIn) device.
+ These fields have to be set by the user with
+ X and Y components of the frmae and pass on to the
+ driver through the respective ioctl calls.
+ @note The fields denote the X and Y components of the frame.
+
+ @see
+ - ioh_video_in_set_cb
+ - ioh_video_in_get_cb
+ */
+struct ioh_video_in_frame_size {
+ unsigned int X_component; /**< The X_component of the frame. */
+ unsigned int Y_component; /**< The Y_component of the frame. */
+ unsigned int pitch_size; /**< Pitch byte size */
+};
+
+/*! @ingroup InterfaceLayer
+ @struct ioh_video_in_frame_buffer
+ @brief The structure for holding the video frame data.
+*/
+struct ioh_video_in_frame_buffer {
+ int index; /* Buffer index */
+ unsigned int virt_addr; /* Frame Buffer virtaul address */
+ unsigned int phy_addr; /* Frame Buffer Physical address */
+ unsigned int data_size; /* data size */
+};
+
+/*! @ingroup VideoIn
+ @def MAXIMUM_FRAME_BUFFERS
+ @brief Maximum frame buffers to be allocated.
+ */
+#define MAXIMUM_FRAME_BUFFERS (5)
+
+/*! @ingroup VideoIn
+ @struct ioh_video_in_frame_buffer_info
+ @brief The structure for holding the video frame information.
+*/
+struct ioh_video_in_frame_buffer_info {
+ int buffer_num; /* Number of frame buffer */
+ int order; /* Page number log2 N of the frame buffer */
+};
+
+/*! @ingroup VideoIn
+ @struct ioh_video_in_frame_buffers
+ @brief The structure of some frame buffers.
+*/
+struct ioh_video_in_frame_buffers {
+ struct ioh_video_in_frame_buffer frame_buffer[MAXIMUM_FRAME_BUFFERS];
+};
+
+/*! @ingroup InterfaceLayer
+ @def VIDEO_IN_IOCTL_MAGIC
+ @brief Outlines the byte value used to define the differnt
+ ioctl commands.
+*/
+#define VIDEO_IN_IOCTL_MAGIC 'V'
+#define BASE BASE_VIDIOC_PRIVATE
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_INPUT_FORMAT
+ @brief Outlines the value specifing the ioctl command for
+ setting input format.
+ @remarks This ioctl command is issued to set the input format
+ settings. The parameter expected for this is a user
+ level address which points to a variable of type
+ struct ioh_video_in_input_format and it contains
+ values specifying the input format to be set.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_INPUT_FORMAT (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 1, struct ioh_video_in_input_format))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_INPUT_FORMAT
+ @brief Outlines the value specifing the ioctl command for
+ getting the current input format
+ @remarks This ioctl command is issued for getting the current
+ input format settings.
+ The expected parameter for this command is a user
+ level address which points to a variable of type struct
+ ioh_video_in_input_format, to which the current input
+ setting has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_INPUT_FORMAT (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 2, struct ioh_video_in_input_format))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_OUTPUT_FORMAT
+ @brief Outlines the value specifing the ioctl command for
+ setting output format.
+ @remarks This ioctl command is issued to set the output format
+ settings. The expected parameter is a user level
+ address which points to a variable of type
+ struct ioh_video_in_output_format and it contains
+ values specifying the required output format.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_OUTPUT_FORMAT (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 3, struct ioh_video_in_output_format))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_OUTPUT_FORMAT
+ @brief Outlines the value specifing the ioctl command for
+ getting the current output format.
+ @remarks This ioctl command is issued for getting the current
+ output format settings.
+ The expected parameter is a user level address
+ pointing to a variable of type
+ struct ioh_video_in_output_format, to which the
+ current output setting has to
+ be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_OUTPUT_FORMAT (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 4, struct ioh_video_in_output_format))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_SIZE
+ @brief Outlines the value specifing the ioctl command for
+ setting the frame size.
+ @remarks This ioctl command is issued for setting the frame
+ size. The expected parameter
+ is a user level address pointing to a variable of type
+ struct ioh_video_in_frame_size
+ and it contains the frame size value that has to be
+ set.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_SIZE (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 5, struct ioh_video_in_frame_size))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_SIZE
+ @brief Outlines the value specifing the ioctl command for
+ getting the current frame size.
+ @remarks This ioctl command is issued for getting the current
+ frame size. The expected
+ parameter is a user level address pointing to a
+ variable of type struct ioh_video_in_frame_size
+ to which the current frame size has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_SIZE (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 6, struct ioh_video_in_frame_size))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_IP_TRANS
+ @brief Outlines the value specifing the ioctl command for
+ setting the scan mode conversion method.
+ @remarks This ioctl command is issued for setting the scan mode
+ conversion method. The expected
+ parameter is a user level address that points to a
+ variable of type enum ioh_video_in_scan_mode_method,
+ and it contains a value specifying the scan mode
+ conversion method that has to be set.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_IP_TRANS (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 7, enum ioh_video_in_scan_mode_method))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_IP_TRANS
+ @brief Outlines the value specifing the ioctl command for
+ getting the current scan mode conversion method.
+ @remarks This ioctl command is issued for getting the current
+ scan mode conversion method. The expected
+ parameter is a user level address that points to a
+ variable of type enum
+ ioh_video_in_scan_mode_method to which the current
+ scan mode conversion method setting
+ has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_IP_TRANS (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 8, enum ioh_video_in_scan_mode_method))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_LUMINENCE_LEVEL
+ @brief Outlines the value specifing the ioctl command for
+ setting the luminance level settings.
+ @remarks This ioctl command is issued for setting the luminance
+ level of the output video. The expected
+ parameter is a user level address that points to a
+ variable of type struct
+ ioh_video_in_luminance_settings, and it contains
+ values specifying the required luminance settings.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_LUMINENCE_LEVEL (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 9, struct ioh_video_in_luminance_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_LUMINENCE_LEVEL
+ @brief Outlines the value specifing the ioctl command for
+ getting the current luminance level settings.
+ @remarks This ioctl command is issued for getting the current
+ luminance settings. The expected parameter is a user
+ level address pointing to a variable of type
+ struct ioh_video_in_luminance_settings,
+ to which the settings has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_LUMINENCE_LEVEL (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 10, struct ioh_video_in_luminance_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_RGB_GAIN
+ @brief Outlines the value specifing the ioctl command for
+ setting the RGB gain level.
+ @remarks This ioctl command is issued for setting the RGB gain
+ settings. The expected parameter
+ is a user level address which points to a variable of
+ type struct ioh_video_in_rgb_gain_settings
+ and it contains values specifying the required RGB Gain
+ settings.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_RGB_GAIN (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 11, struct ioh_video_in_rgb_gain_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_RGB_GAIN
+ @brief Outlines the value specifing the ioctl command for
+ getting the current luminance level setting.
+ @remarks This ioctl command is issued for getting the current
+ RGB Gain settings. The expected
+ parameter is a user level address that points to a
+ variable of type struct ioh_video_in_rgb_gain_settings,
+ to which the settings has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_RGB_GAIN (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 12, struct ioh_video_in_rgb_gain_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_CAP_START
+ @brief Outlines the value specifing the ioctl command for
+ initiating the video capture process.
+ @remarks This ioctl command is issued to start capturing the
+ video data. This command does not
+ expect any parameter.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_CAP_START (_IO(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 13))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_CAP_STOP
+ @brief Outlines the value specifing the ioctl command for
+ stopping the video capturing process.
+ @remarks This ioctl command is issued to stop capturing the
+ video data. This command does not expect any parameter.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_CAP_STOP (_IO(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 14))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_BLANK_TIM
+ @brief Outlines the value specifing the ioctl command for
+ setting Blanking Timing Signal.
+ @remarks This ioctl command is issued for setting the Blanking
+ Signal timing. The expected parameter is a user level
+ address which points to a variable of type
+ struct ioh_video_in_blank_tim_settings and it contains
+ the values specifying the required settings.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_BLANK_TIM (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 15, struct ioh_video_in_blank_tim_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_BLANK_TIM
+ @brief Outlines the value specifing the ioctl command for
+ getting the current Blanking Timing Signal.
+ @remarks This ioctl command is issued for getting the current
+ Blanking Signal timing settings.
+ The expected parameter is a user level address which
+ points to a variable of type
+ struct ioh_video_in_blank_tim_settings, to which the
+ current settings has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_BLANK_TIM (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 16, struct ioh_video_in_blank_tim_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_BB
+ @brief Outlines the value specifing the ioctl command for
+ setting Blue background mode.
+ @remarks This ioctl command is issued for setting the Blue
+ Background settings. The expected
+ parameter is a user level address which points to
+ variable of type enum
+ ioh_video_in_bb_mode
+ and it contains the value specifying the required
+ settings.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_BB (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 17, enum ioh_video_in_bb_mode))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_BB
+ @brief Outlines the value specifing the ioctl command for
+ getting the current Blue background mode.
+ @remarks This ioctl command is issued for getting the current
+ Blue background settings. The
+ expected parameter is a user level address
+ which points to a variable of type
+ enum ioh_video_in_bb_mode,
+ to which the current settings has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_BB (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 18, enum ioh_video_in_bb_mode))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_SET_CB
+ @brief Outlines the value specifing the ioctl command for
+ setting Color bar output level.
+ @remarks This ioctl command is issued for setting the Color Bar
+ settings. The expected parameter is a
+ user level address which points to a variable of type
+ struct ioh_video_in_cb_settings and it
+ contains values specifying the required settings.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_SET_CB (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 19, struct ioh_video_in_cb_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_CB
+ @brief Outlines the value specifing the ioctl command for
+ getting the current Color bar output level.
+ @remarks This ioctl command is issued for getting the current
+ color bar settings. The expected
+ parameter is a user level address which points to a
+ variable of type struct
+ ioh_video_in_cb_settings, to which the current
+ settings has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_CB (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 20, struct ioh_video_in_cb_settings))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_BUFFER_SIZE
+ @brief Outlines the value specifing the ioctl command for
+ getting the buffer size.
+ @remarks This ioctl command is issued for getting the buffer
+ size. The expected parameter is a
+ user level address which points to a variable of type
+ unsigned long, to which the buffer
+ size has to be updated.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_BUFFER_SIZE (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 21, unsigned long))
+
+#if 0
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_ALLOC_FRAME_BUFFER
+ @brief Outlines the value specifing the ioctl command for
+ allocate the frame buffers.
+ @remarks This ioctl command is issued to allocate the
+ frame buffers.
+ The expected parameter is a user level address which
+ points to a variable of type struct
+ ioh_video_in_frame_buffer_info.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_ALLOC_FRAME_BUFFER (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 22, struct ioh_video_in_frame_buffer_info))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_FREE_FRAME_BUFFER
+ @brief Outlines the value specifing the ioctl command for
+ free the frame buffers.
+ @remarks This ioctl command is issued to free the
+ frame buffers.
+ The expected parameter is a user level address which
+ points to a variable of type struct
+ ioh_video_in_frame_buffer_info.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_FREE_FRAME_BUFFER (_IOW(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 23, struct ioh_video_in_frame_buffer_info))
+#endif
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_GET_FRAME_BUFFERS
+ @brief Outlines the value specifing the ioctl command for
+ read the information of the frame buffers.
+ @remarks This ioctl command is issued to get the information of
+ frame buffers.
+ The expected parameter is a user level address which
+ points to a variable of type struct
+ ioh_video_in_frame_buffer.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_GET_FRAME_BUFFERS (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 24, struct ioh_video_in_frame_buffers))
+
+/*! @ingroup InterfaceLayer
+ @def IOH_VIDEO_READ_FRAME_BUFFER
+ @brief Outlines the value specifing the ioctl command for
+ read the frame buffer.
+ @remarks This ioctl command is issued to get frame buffer.
+ The expected parameter is a user level address which
+ points to a variable of type struct
+ ioh_video_in_frame_buffer.
+ @see
+ - ioh_video_in_ioctl
+ */
+#define IOH_VIDEO_READ_FRAME_BUFFER (_IOR(VIDEO_IN_IOCTL_MAGIC,\
+BASE + 25, struct ioh_video_in_frame_buffer))
+
+
+/*! @ingroup VideoIn
+ @def IOH_VIDEOIN_SUCCESS
+ @brief Outlines the return value of the function on success.
+*/
+#define IOH_VIDEOIN_SUCCESS (0)
+
+/*! @ingroup VideoIn
+ @def IOH_VIDEOIN_FAIL
+ @brief Outlines the return value of the function on failure.
+ */
+#define IOH_VIDEOIN_FAIL (-1)
+
+
+#endif
+
+
diff --git a/drivers/media/video/ioh_video_in_ml86v76651.c b/drivers/media/video/ioh_video_in_ml86v76651.c
new file mode 100644
index 0000000..7231e32
--- /dev/null
+++ b/drivers/media/video/ioh_video_in_ml86v76651.c
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("IOH video-in driver for OKI SEMICONDUCTOR ML86V76651.");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+/*
+ * Basic window sizes. These probably belong somewhere more globally
+ * useful.
+ */
+#define VGA_WIDTH 640
+#define VGA_HEIGHT 480
+
+/* Registers */
+#define REG_SSEPL 0x37 /* Sync Separation Level Contrl */
+
+#define REG_COM7 0x12 /* Control 7 */
+#define COM7_FMT_HDTV 0x00
+#define COM7_FMT_VGA 0x40 /* VGA format */
+#define COM7_FMT_CIF 0x20 /* CIF format */
+#define COM7_FMT_QVGA 0x10 /* QVGA format */
+#define COM7_FMT_QCIF 0x08 /* QCIF format */
+#define REG_COM8 0x13 /* Control 8 */
+#define COM8_AEC 0x01 /* Auto exposure enable */
+
+
+#define REG_PID 0x0a /* Product ID MSB */
+#define REG_VER 0x0b /* Product ID LSB */
+
+#define REG_MIDH 0x1c /* Manuf. ID high */
+#define REG_MIDL 0x1d /* Manuf. ID low */
+
+
+#define REG_HREF 0x32 /* HREF pieces */
+#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */
+
+#define REG_AECHM 0xa1 /* AEC MSC 5bit */
+#define REG_AECH 0x10 /* AEC value */
+
+
+/*
+ * Information we maintain about a known sensor.
+ */
+struct ml86v76651_format_struct; /* coming later */
+struct ml86v76651_info {
+ struct v4l2_subdev sd;
+ struct ml86v76651_format_struct *fmt; /* Current format */
+ unsigned char sat; /* Saturation value */
+ int hue; /* Hue value */
+};
+
+static inline struct ml86v76651_info *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ml86v76651_info, sd);
+}
+
+
+
+/*
+ * The default register settings.
+ */
+
+struct regval_list {
+ unsigned char reg_num;
+ unsigned char value;
+};
+
+static struct regval_list ml86v76651_default_regs[] = {
+#ifdef IOH_VIDEO_IN_ML86V76653
+#else
+ {0x71, 0x00}, /* for Device Workaround */
+ {0x71, 0x80}, /* 32MHz SQ_PIXEL */
+#endif
+ {0x00, 0x02}, /* 32MHz SQ_PIXEL */
+ {0x01, 0x00}, /* BT656 */
+ {0x51, 0x80}, /* Normal out */
+ {0x50, 0x89}, /* Normal out */
+ {0x68, 0xe0}, /* analog control */
+ {0x78, 0x22}, /* status1 is ODD/EVEN */
+#ifdef IOH_VIDEO_IN_ML86V76653
+#else
+ {0x6f, 0x80}, /* Others */
+#endif
+ {0xff, 0xff}, /* end */
+};
+
+
+static struct regval_list ml86v76651_fmt_yuv422[] = {
+#ifdef IOH_VIDEO_IN_ML86V76653
+#else
+ { 0x71, 0x00 }, /* for Device Workaround */
+ { 0x71, 0x80 }, /* 32MHz SQ_PIXEL */
+#endif
+ { 0x00, 0x02 }, /* 32MHz SQ_PIXEL */
+ { 0x01, 0x00 }, /* BT656 */
+ { 0x51, 0x80 }, /* Normal out */
+ { 0x50, 0x89 }, /* Normal out */
+ { 0x68, 0xe0 }, /* analog control */
+ { 0x78, 0x22 }, /* status1 is ODD/EVEN */
+#ifdef IOH_VIDEO_IN_ML86V76653
+#else
+ { 0x6f, 0x80 }, /* Others */
+#endif
+ { 0xff, 0xff }, /* end */
+};
+
+
+/*
+ * Low-level register I/O.
+ */
+
+#if 1
+static int ioh_video_in_read_value(struct i2c_client *client, u8 reg, u8 *val)
+{
+ u8 data = 0;
+
+ client->flags = 0;
+ data = 0;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ client->flags = 0;
+ data = reg;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_recv(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ *val = data;
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) --> 0x%02X end.",
+ __func__, reg, *val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) 0x%02X read error failed.",
+ __func__, reg, *val);
+
+ return -EINVAL;
+}
+
+static int ioh_video_in_write_value(struct i2c_client *client, u8 reg, u8 val)
+{
+ u8 data = 0;
+ unsigned char data2[2] = { reg, val };
+
+ client->flags = 0;
+ data = 0;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_send(client, data2, 2) != 2)
+ goto err;
+ msleep(2);
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) <-- 0x%02X end.",
+ __func__, reg, val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) <-- 0x%02X write error failed.",
+ __func__, reg, val);
+
+ return -EINVAL;
+}
+
+#endif
+
+static int ml86v76651_read(struct v4l2_subdev *sd, unsigned char reg,
+ unsigned char *value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+#if 0
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret >= 0) {
+ *value = (unsigned char)ret;
+ ret = 0;
+ }
+#else
+ ret = ioh_video_in_read_value(client, reg, value);
+#endif
+ return ret;
+}
+static int ml86v76651_write(struct v4l2_subdev *sd, unsigned char reg,
+ unsigned char value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+#if 0
+ int ret = i2c_smbus_write_byte_data(client, reg, value);
+#else
+ int ret = ioh_video_in_write_value(client, reg, value);
+#endif
+
+ /* This sensor doesn't have reset register... */
+
+ return ret;
+}
+
+
+/*
+ * Write a list of register settings; ff/ff stops the process.
+ */
+static int ml86v76651_write_array(struct v4l2_subdev *sd,
+ struct regval_list *vals)
+{
+ while (vals->reg_num != 0xff || vals->value != 0xff) {
+ int ret = ml86v76651_write(sd, vals->reg_num, vals->value);
+ if (ret < 0)
+ return ret;
+ vals++;
+ }
+ return 0;
+}
+
+
+/*
+ * Stuff that knows about the sensor.
+ */
+static int ml86v76651_reset(struct v4l2_subdev *sd, u32 val)
+{
+ /* This sensor doesn't have reset register... */
+ return 0;
+}
+
+
+static int ml86v76651_init(struct v4l2_subdev *sd, u32 val)
+{
+ return ml86v76651_write_array(sd, ml86v76651_default_regs);
+}
+
+
+static int ml86v76651_detect(struct v4l2_subdev *sd)
+{
+ int ret;
+
+ ret = ml86v76651_init(sd, 0);
+ if (ret < 0)
+ return ret;
+
+ /* This sensor doesn't have id register... */
+
+ return 0;
+}
+
+static struct ml86v76651_format_struct {
+ enum v4l2_mbus_pixelcode mbus_code;
+ enum v4l2_colorspace colorspace;
+ struct regval_list *regs;
+} ml86v76651_formats[] = {
+ {
+ .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .regs = ml86v76651_fmt_yuv422,
+ },
+};
+#define N_ML86V76651_FMTS ARRAY_SIZE(ml86v76651_formats)
+
+static struct regval_list ml86v76651_vga_regs[] = {
+ { 0xff, 0xff },
+};
+
+
+static struct ml86v76651_win_size {
+ int width;
+ int height;
+ struct regval_list *regs; /* Regs to tweak */
+/* h/vref stuff */
+} ml86v76651_win_sizes[] = {
+ /* VGA */
+ {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .regs = ml86v76651_vga_regs,
+ },
+};
+
+#define N_WIN_SIZES (ARRAY_SIZE(ml86v76651_win_sizes))
+
+static int ml86v76651_try_fmt_internal(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt,
+ struct ml86v76651_format_struct **ret_fmt,
+ struct ml86v76651_win_size **ret_wsize)
+{
+ int index;
+ struct ml86v76651_win_size *wsize;
+
+ for (index = 0; index < N_ML86V76651_FMTS; index++)
+ if (ml86v76651_formats[index].mbus_code == fmt->code)
+ break;
+ if (index >= N_ML86V76651_FMTS) {
+ /* default to first format */
+ index = 0;
+ fmt->code = ml86v76651_formats[0].mbus_code;
+ }
+ if (ret_fmt != NULL)
+ *ret_fmt = ml86v76651_formats + index;
+
+ fmt->field = V4L2_FIELD_NONE;
+
+ for (wsize = ml86v76651_win_sizes;
+ wsize < ml86v76651_win_sizes + N_WIN_SIZES; wsize++)
+ if (fmt->width >= wsize->width && fmt->height >= wsize->height)
+ break;
+ if (wsize >= ml86v76651_win_sizes + N_WIN_SIZES)
+ wsize--; /* Take the smallest one */
+ if (ret_wsize != NULL)
+ *ret_wsize = wsize;
+ /*
+ * Note the size we'll actually handle.
+ */
+ fmt->width = wsize->width;
+ fmt->height = wsize->height;
+ fmt->colorspace = ml86v76651_formats[index].colorspace;
+
+ return 0;
+}
+
+static int ml86v76651_try_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ return ml86v76651_try_fmt_internal(sd, fmt, NULL, NULL);
+}
+
+/*
+ * Set a format.
+ */
+static int ml86v76651_s_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ int ret;
+ struct ml86v76651_format_struct *ovfmt;
+ struct ml86v76651_win_size *wsize;
+ struct ml86v76651_info *info = to_state(sd);
+
+ ret = ml86v76651_try_fmt_internal(sd, fmt, &ovfmt, &wsize);
+ if (ret)
+ return ret;
+
+ /* Reset */
+ ml86v76651_reset(sd, 0);
+
+ /*
+ * Now write the rest of the array.
+ */
+ ml86v76651_write_array(sd, ovfmt->regs);
+ ret = 0;
+ if (wsize->regs)
+ ret = ml86v76651_write_array(sd, wsize->regs);
+ info->fmt = ovfmt;
+
+ return ret;
+}
+
+
+/*
+ * Code for dealing with controls.
+ */
+
+static unsigned char ml86v76651_sm_to_abs(unsigned char v)
+{
+ if ((v & 0x40) == 0)
+ return 63 - (v & 0x3f);
+ return 127 - (v & 0x3f);
+}
+
+
+static unsigned char ml86v76651_abs_to_sm(unsigned char v)
+{
+ if (v > 63)
+ return ((63 - v) | 0x40) & 0x7f;
+ return (63 - v) & 0x7f;
+}
+
+static int ml86v76651_s_brightness(struct v4l2_subdev *sd, int value)
+{
+ unsigned char v;
+ int ret;
+
+ v = ml86v76651_abs_to_sm(value);
+
+ ret = ml86v76651_write(sd, REG_SSEPL, v);
+
+ return ret;
+}
+
+static int ml86v76651_g_brightness(struct v4l2_subdev *sd, __s32 *value)
+{
+ unsigned char v = 0;
+ int ret;
+
+ ret = ml86v76651_read(sd, REG_SSEPL, &v);
+
+ *value = ml86v76651_sm_to_abs(v);
+
+ return ret;
+}
+
+
+
+static int ml86v76651_queryctrl(struct v4l2_subdev *sd,
+ struct v4l2_queryctrl *qc)
+{
+ /* Fill in min, max, step and default value for these controls. */
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 127, 1, 63);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ml86v76651_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return ml86v76651_g_brightness(sd, &ctrl->value);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ml86v76651_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return ml86v76651_s_brightness(sd, ctrl->value);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ml86v76651_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0);
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ml86v76651_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ unsigned char val = 0;
+ int ret;
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ ret = ml86v76651_read(sd, reg->reg & 0xff, &val);
+ reg->val = val;
+ reg->size = 1;
+ return ret;
+}
+
+static int ml86v76651_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ ml86v76651_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ return 0;
+}
+#endif
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops ml86v76651_core_ops = {
+ .g_chip_ident = ml86v76651_g_chip_ident,
+ .g_ctrl = ml86v76651_g_ctrl,
+ .s_ctrl = ml86v76651_s_ctrl,
+ .queryctrl = ml86v76651_queryctrl,
+ .reset = ml86v76651_reset,
+ .init = ml86v76651_init,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ml86v76651_g_register,
+ .s_register = ml86v76651_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops ml86v76651_video_ops = {
+ .try_mbus_fmt = ml86v76651_try_mbus_fmt,
+ .s_mbus_fmt = ml86v76651_s_mbus_fmt,
+};
+
+static const struct v4l2_subdev_ops ml86v76651_ops = {
+ .core = &ml86v76651_core_ops,
+ .video = &ml86v76651_video_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int ml86v76651_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct ml86v76651_info *info;
+ int ret;
+
+ info = kzalloc(sizeof(struct ml86v76651_info), GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+ sd = &info->sd;
+ v4l2_i2c_subdev_init(sd, client, &ml86v76651_ops);
+
+ /* Make sure it's an ml86v76651 */
+ ret = ml86v76651_detect(sd);
+ if (ret) {
+ v4l_dbg(1, debug, client,
+ "chip found @ 0x%x (%s) is not an ml86v76651 chip.\n",
+ client->addr << 1, client->adapter->name);
+ kfree(info);
+ return ret;
+ }
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ info->fmt = &ml86v76651_formats[0];
+ info->sat = 128; /* Review this */
+
+ return 0;
+}
+
+
+static int ml86v76651_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id ml86v76651_id[] = {
+ { "ioh_i2c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ml86v76651_id);
+
+static struct i2c_driver ml86v76651_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ioh_i2c",
+ },
+ .probe = ml86v76651_probe,
+ .remove = ml86v76651_remove,
+ .id_table = ml86v76651_id,
+};
+
+static __init int init_ml86v76651(void)
+{
+ return i2c_add_driver(&ml86v76651_driver);
+}
+
+static __exit void exit_ml86v76651(void)
+{
+ i2c_del_driver(&ml86v76651_driver);
+}
+
+module_init(init_ml86v76651);
+module_exit(exit_ml86v76651);
+
+
diff --git a/drivers/media/video/ioh_video_in_ncm13j.c b/drivers/media/video/ioh_video_in_ncm13j.c
new file mode 100644
index 0000000..8f38f7d
--- /dev/null
+++ b/drivers/media/video/ioh_video_in_ncm13j.c
@@ -0,0 +1,584 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("IOH video-in driver for NIPPON CEMI-CON NCM13J.");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+/*
+ * Basic window sizes. These probably belong somewhere more globally
+ * useful.
+ */
+#define QVGA_WIDTH 320
+#define QVGA_HEIGHT 240
+#define VGA_WIDTH 640
+#define VGA_HEIGHT 480
+#define HDTV_WIDTH 1280
+#define HDTV_HEIGHT 720
+#define SXGA_WIDTH 1280
+#define SXGA_HEIGHT 1024
+
+/* Registers */
+
+#define REG_RESET 0x000d
+#define ASSERT_RESET 0x0023
+#define DEASSERT_RESET 0x0008
+
+#define REG_UNIQUE_ID 0x0000 /* Manuf. ID address */
+#define REG_UNIQUE_VAL 0x148c /* Manuf. ID value */
+
+/*
+ * Information we maintain about a known sensor.
+ */
+struct ncm13j_format_struct; /* coming later */
+struct ncm13j_info {
+ struct v4l2_subdev sd;
+ struct ncm13j_format_struct *fmt; /* Current format */
+ unsigned char sat; /* Saturation value */
+ int hue; /* Hue value */
+};
+
+static inline struct ncm13j_info *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ncm13j_info, sd);
+}
+
+
+
+/*
+ * The default register settings.
+ */
+
+struct regval_list {
+ u16 reg_num;
+ u16 value;
+};
+
+static struct regval_list ncm13j_default_regs[] = {
+ { 0x0066, 0x1b01}, /* PLL M=27 N=1 */
+ { 0x0067, 0x0503}, /* PLL P=3 */
+ { 0x0065, 0xa000}, /* PLL power up */
+ { 0x0065, 0x2000}, /* PLL enable */
+ { 0xffff, 0xffff}, /* end */
+};
+
+
+static struct regval_list ncm13j_fmt_yuv422[] = {
+ { 0x013a, 0x0200}, /* Output Format Control A */
+ { 0x019b, 0x0200}, /* Output Format Control B */
+ { 0xffff, 0xffff}, /* end */
+};
+
+
+
+/*
+ * Low-level register I/O.
+ */
+
+static int ioh_video_in_read_value(struct i2c_client *client, u8 reg, u8 *val)
+{
+ u8 data = 0;
+
+ client->flags = 0;
+ data = reg;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_recv(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ *val = data;
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) --> 0x%02X end.",
+ __func__, reg, *val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) 0x%02X read error failed.",
+ __func__, reg, *val);
+
+ return -EINVAL;
+}
+
+static int ioh_video_in_write_value(struct i2c_client *client, u8 reg, u8 val)
+{
+ unsigned char data2[2] = { reg, val };
+
+ client->flags = 0;
+
+ if (i2c_master_send(client, data2, 2) != 2)
+ goto err;
+ msleep(2);
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) <-- 0x%02X end.",
+ __func__, reg, val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) <-- 0x%02X write error failed.",
+ __func__, reg, val);
+
+ return -EINVAL;
+}
+
+static int ncm13j_read(struct v4l2_subdev *sd, u16 reg, u16 *value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+ unsigned char reg8;
+ unsigned char val8, valh, vall;
+
+ /* Page_h setting */
+ reg8 = 0xf0;
+ val8 = 0x00;
+ ret = ioh_video_in_write_value(client, reg8, val8);
+
+ /* Page_l setting */
+ reg8 = 0xf1;
+ val8 = (0x0700 & reg) >> 8;
+ ret = ioh_video_in_write_value(client, reg8, val8);
+
+ /* MSB8 Read */
+ reg8 = (0x00ff & reg);
+ ret = ioh_video_in_read_value(client, reg8, &valh);
+
+ /* LSB8 Read */
+ reg8 = 0xf1;
+ ret = ioh_video_in_read_value(client, reg8, &vall);
+
+ *value = ((0x00ff & valh) << 8) | (0x00ff & vall);
+
+ return ret;
+}
+static int ncm13j_write(struct v4l2_subdev *sd, u16 reg, u16 value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+ unsigned char reg8;
+ unsigned char val8;
+
+ /* Page_h Write */
+ reg8 = 0xf0;
+ val8 = 0x00;
+ ret = ioh_video_in_write_value(client, reg8, val8);
+
+ /* Page_l Write */
+ reg8 = 0xf1;
+ val8 = (0x0700 & reg) >> 8;
+ ret = ioh_video_in_write_value(client, reg8, val8);
+
+ /* MSB8 Write */
+ reg8 = (0x00ff & reg);
+ val8 = (0xff00 & value) >> 8;
+ ret = ioh_video_in_write_value(client, reg8, val8);
+
+ /* LSB8 Write */
+ reg8 = 0xf1;
+ val8 = (0x00ff & value);
+ ret = ioh_video_in_write_value(client, reg8, val8);
+
+ return ret;
+}
+
+
+/*
+ * Write a list of register settings; ff/ff stops the process.
+ */
+static int ncm13j_write_array(struct v4l2_subdev *sd, struct regval_list *vals)
+{
+ while (vals->reg_num != 0xffff || vals->value != 0xffff) {
+ int ret = ncm13j_write(sd, vals->reg_num, vals->value);
+ if (ret < 0)
+ return ret;
+ vals++;
+ }
+ return 0;
+}
+
+
+/*
+ * Stuff that knows about the sensor.
+ */
+static int ncm13j_reset(struct v4l2_subdev *sd, u32 val)
+{
+ ncm13j_write(sd, REG_RESET, ASSERT_RESET);
+ msleep(1);
+ ncm13j_write(sd, REG_RESET, DEASSERT_RESET);
+ msleep(1);
+ return 0;
+}
+
+
+static int ncm13j_init(struct v4l2_subdev *sd, u32 val)
+{
+ return ncm13j_write_array(sd, ncm13j_default_regs);
+}
+
+
+static int ncm13j_detect(struct v4l2_subdev *sd)
+{
+ u16 v;
+ int ret;
+
+ ret = ncm13j_reset(sd, 0);
+ if (ret < 0)
+ return ret;
+ ret = ncm13j_read(sd, REG_UNIQUE_ID, &v);
+ if (ret < 0)
+ return ret;
+ if (v != REG_UNIQUE_VAL) /* id. */
+ return -ENODEV;
+ ret = ncm13j_init(sd, 0);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static struct ncm13j_format_struct {
+ enum v4l2_mbus_pixelcode mbus_code;
+ enum v4l2_colorspace colorspace;
+ struct regval_list *regs;
+} ncm13j_formats[] = {
+ {
+ .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .regs = ncm13j_fmt_yuv422,
+ },
+};
+#define N_NCM13J_FMTS ARRAY_SIZE(ncm13j_formats)
+
+static struct regval_list ncm13j_qvga_regs[] = {
+ { 0x01a7, QVGA_WIDTH}, /* Horizontal Output Size A = 320 */
+ { 0x01aa, QVGA_HEIGHT}, /* Vertical Output Size A = 240 */
+ /* { 0x01a6, QVGA_WIDTH}, Horizontal Zoom = 320 */
+ /* { 0x01a9, QVGA_HEIGHT}, Vertical Zoom = 240 */
+ { 0x01ae, 0x0c09}, /* Reducer Zoom Step Size */
+ { 0x00c8, 0x0000}, /* Context A */
+ { 0x02c8, 0x0000}, /* Context A */
+ { 0xffff, 0xffff}, /* end */
+};
+
+static struct regval_list ncm13j_vga_regs[] = {
+ { 0x01a7, VGA_WIDTH}, /* Horizontal Output Size A = 640 */
+ { 0x01aa, VGA_HEIGHT}, /* Vertical Output Size A = 480 */
+ /* { 0x01a6, VGA_WIDTH}, Horizontal Zoom = 640 */
+ /* { 0x01a9, VGA_HEIGHT}, Vertical Zoom = 480 */
+ { 0x01ae, 0x0c09}, /* Reducer Zoom Step Size */
+ { 0x00c8, 0x0000}, /* Context A */
+ { 0x02c8, 0x0000}, /* Context A */
+ { 0xffff, 0xffff}, /* end */
+};
+
+static struct regval_list ncm13j_hdtv_regs[] = {
+ { 0x01a1, HDTV_WIDTH}, /* Horizontal Output Size B = 1280 */
+ { 0x01a4, HDTV_HEIGHT}, /* Vertical Output Size B = 720 */
+ { 0x01a6, HDTV_WIDTH}, /* Horizontal Zoom = 1280 */
+ { 0x01a9, HDTV_HEIGHT}, /* Vertical Zoom = 720 */
+ { 0x01ae, 0x1009}, /* Reducer Zoom Step Size */
+ { 0x00c8, 0x000b}, /* Context B */
+ { 0x02c8, 0x070b}, /* Context B */
+ { 0xffff, 0xffff}, /* end */
+};
+
+static struct regval_list ncm13j_sxga_regs[] = {
+ { 0x01a1, SXGA_WIDTH}, /* Horizontal Output Size B = 1280 */
+ { 0x01a4, SXGA_HEIGHT}, /* Vertical Output Size B = 1024 */
+ { 0x01a6, SXGA_WIDTH}, /* Horizontal Zoom = 1280 */
+ { 0x01a9, SXGA_HEIGHT}, /* Vertical Zoom = 1024 */
+ { 0x01ae, 0x0a08}, /* Reducer Zoom Step Size */
+ { 0x00c8, 0x000b}, /* Context B */
+ { 0x02c8, 0x070b}, /* Context B */
+ { 0xffff, 0xffff}, /* end */
+};
+
+static struct ncm13j_win_size {
+ int width;
+ int height;
+ struct regval_list *regs; /* Regs to tweak */
+/* h/vref stuff */
+} ncm13j_win_sizes[] = {
+ /* SXGA */
+ {
+ .width = SXGA_WIDTH,
+ .height = SXGA_HEIGHT,
+ .regs = ncm13j_sxga_regs,
+ },
+ /* HDTV */
+ {
+ .width = HDTV_WIDTH,
+ .height = HDTV_HEIGHT,
+ .regs = ncm13j_hdtv_regs,
+ },
+ /* VGA */
+ {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .regs = ncm13j_vga_regs,
+ },
+ /* QVGA */
+ {
+ .width = QVGA_WIDTH,
+ .height = QVGA_HEIGHT,
+ .regs = ncm13j_qvga_regs,
+ },
+};
+
+#define N_WIN_SIZES (ARRAY_SIZE(ncm13j_win_sizes))
+
+static int ncm13j_try_fmt_internal(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt,
+ struct ncm13j_format_struct **ret_fmt,
+ struct ncm13j_win_size **ret_wsize)
+{
+ int index;
+ struct ncm13j_win_size *wsize;
+
+ for (index = 0; index < N_NCM13J_FMTS; index++)
+ if (ncm13j_formats[index].mbus_code == fmt->code)
+ break;
+ if (index >= N_NCM13J_FMTS) {
+ /* default to first format */
+ index = 0;
+ fmt->code = ncm13j_formats[0].mbus_code;
+ }
+ if (ret_fmt != NULL)
+ *ret_fmt = ncm13j_formats + index;
+
+ fmt->field = V4L2_FIELD_NONE;
+
+ for (wsize = ncm13j_win_sizes;
+ wsize < ncm13j_win_sizes + N_WIN_SIZES; wsize++)
+ if (fmt->width >= wsize->width && fmt->height >= wsize->height)
+ break;
+ if (wsize >= ncm13j_win_sizes + N_WIN_SIZES)
+ wsize--; /* Take the smallest one */
+ if (ret_wsize != NULL)
+ *ret_wsize = wsize;
+ /*
+ * Note the size we'll actually handle.
+ */
+ fmt->width = wsize->width;
+ fmt->height = wsize->height;
+ fmt->colorspace = ncm13j_formats[index].colorspace;
+
+ return 0;
+}
+
+static int ncm13j_try_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ return ncm13j_try_fmt_internal(sd, fmt, NULL, NULL);
+}
+
+/*
+ * Set a format.
+ */
+static int ncm13j_s_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ int ret;
+ struct ncm13j_format_struct *ovfmt;
+ struct ncm13j_win_size *wsize;
+ struct ncm13j_info *info = to_state(sd);
+
+ ret = ncm13j_try_fmt_internal(sd, fmt, &ovfmt, &wsize);
+
+ if (ret)
+ return ret;
+
+ /* Reset */
+ ncm13j_reset(sd, 0);
+
+ /*
+ * Now write the rest of the array. Also store start/stops
+ */
+ ncm13j_write_array(sd, ovfmt->regs /* + 1*/);
+ ret = 0;
+ if (wsize->regs)
+ ret = ncm13j_write_array(sd, wsize->regs);
+ info->fmt = ovfmt;
+
+ return ret;
+}
+
+
+/*
+ * Code for dealing with controls.
+ */
+
+static int ncm13j_queryctrl(struct v4l2_subdev *sd,
+ struct v4l2_queryctrl *qc)
+{
+ /* Fill in min, max, step and default value for these controls. */
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ncm13j_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ncm13j_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ncm13j_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops ncm13j_core_ops = {
+ .g_chip_ident = ncm13j_g_chip_ident,
+ .g_ctrl = ncm13j_g_ctrl,
+ .s_ctrl = ncm13j_s_ctrl,
+ .queryctrl = ncm13j_queryctrl,
+ .reset = ncm13j_reset,
+ .init = ncm13j_init,
+};
+
+static const struct v4l2_subdev_video_ops ncm13j_video_ops = {
+ .try_mbus_fmt = ncm13j_try_mbus_fmt,
+ .s_mbus_fmt = ncm13j_s_mbus_fmt,
+};
+
+static const struct v4l2_subdev_ops ncm13j_ops = {
+ .core = &ncm13j_core_ops,
+ .video = &ncm13j_video_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int ncm13j_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct ncm13j_info *info;
+ int ret;
+
+ info = kzalloc(sizeof(struct ncm13j_info), GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+ sd = &info->sd;
+ v4l2_i2c_subdev_init(sd, client, &ncm13j_ops);
+
+ /* Make sure it's an ncm13j */
+ ret = ncm13j_detect(sd);
+ if (ret) {
+ v4l_dbg(1, debug, client,
+ "chip found @ 0x%x (%s) is not an ncm13j chip.\n",
+ client->addr << 1, client->adapter->name);
+ kfree(info);
+ return ret;
+ }
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ info->fmt = &ncm13j_formats[0];
+ info->sat = 128; /* Review this */
+
+ return 0;
+}
+
+
+static int ncm13j_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id ncm13j_id[] = {
+ { "ioh_i2c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ncm13j_id);
+
+static struct i2c_driver ncm13j_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ioh_i2c",
+ },
+ .probe = ncm13j_probe,
+ .remove = ncm13j_remove,
+ .id_table = ncm13j_id,
+};
+
+static __init int init_ncm13j(void)
+{
+ return i2c_add_driver(&ncm13j_driver);
+}
+
+static __exit void exit_ncm13j(void)
+{
+ i2c_del_driver(&ncm13j_driver);
+}
+
+module_init(init_ncm13j);
+module_exit(exit_ncm13j);
+
+
diff --git a/drivers/media/video/ioh_video_in_ov7620.c b/drivers/media/video/ioh_video_in_ov7620.c
new file mode 100644
index 0000000..78802d5
--- /dev/null
+++ b/drivers/media/video/ioh_video_in_ov7620.c
@@ -0,0 +1,637 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("IOH video-in driver for OmniVision ov7620 sensor.");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+/*
+ * Basic window sizes. These probably belong somewhere more globally
+ * useful.
+ */
+#define VGA_WIDTH 640
+#define VGA_HEIGHT 480
+#define QVGA_WIDTH 320
+#define QVGA_HEIGHT 240
+
+/* Registers */
+#define REG_BRIGHT 0x06 /* Brightness */
+
+#define REG_COMJ 0x2d /* Common Control J */
+#define COMJ_4 0x10 /* Auto brightness enable */
+
+#define REG_COMC 0x14 /* Common Control C */
+#define COMC_FMT_QVGA 0x20 /* OVGA digital output format selesction */
+
+#define REG_COMA 0x12 /* Common Control A */
+#define COMA_RESET 0x80 /* Register reset */
+
+#define REG_MIDH 0x1c /* Manuf. ID high */
+#define REG_MIDL 0x1d /* Manuf. ID low */
+
+#define REG_HSTART 0x17 /* Horiz start high bits */
+#define REG_HSTOP 0x18 /* Horiz stop high bits */
+#define REG_VSTART 0x19 /* Vert start high bits */
+#define REG_VSTOP 0x1a /* Vert stop high bits */
+
+/*
+ * Information we maintain about a known sensor.
+ */
+struct ov7620_format_struct; /* coming later */
+struct ov7620_info {
+ struct v4l2_subdev sd;
+ struct ov7620_format_struct *fmt; /* Current format */
+ unsigned char sat; /* Saturation value */
+ int hue; /* Hue value */
+};
+
+static inline struct ov7620_info *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ov7620_info, sd);
+}
+
+
+
+/*
+ * The default register settings.
+ */
+
+struct regval_list {
+ unsigned char reg_num;
+ unsigned char value;
+};
+
+static struct regval_list ov7620_default_regs[] = {
+ { REG_COMC, 0x04 },
+ { 0x11, 0x40 },
+ { 0x13, 0x31 },
+ { 0x28, 0x20 }, /* Progressive */
+ { 0x2d, 0x91 },
+ { 0xff, 0xff }, /* end */
+};
+
+
+static struct regval_list ov7620_fmt_yuv422[] = {
+ { REG_COMC, 0x04 },
+ { 0x11, 0x40 },
+ { 0x13, 0x31 },
+ { 0x28, 0x20 }, /* Progressive */
+ { 0x2d, 0x91 },
+ { 0xff, 0xff }, /* end */
+};
+
+
+
+/*
+ * Low-level register I/O.
+ */
+
+#if 1
+static int ioh_video_in_read_value(struct i2c_client *client, u8 reg, u8 *val)
+{
+ u8 data = 0;
+
+ client->flags = 0;
+ data = 0;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ client->flags = 0;
+ data = reg;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_recv(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ *val = data;
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) --> 0x%02X end.",
+ __func__, reg, *val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) 0x%02X read error failed.",
+ __func__, reg, *val);
+
+ return -EINVAL;
+}
+
+static int ioh_video_in_write_value(struct i2c_client *client, u8 reg, u8 val)
+{
+ u8 data = 0;
+ unsigned char data2[2] = { reg, val };
+
+ client->flags = 0;
+ data = 0;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_send(client, data2, 2) != 2)
+ goto err;
+ msleep(2);
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) <-- 0x%02X end.",
+ __func__, reg, val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) <-- 0x%02X write error failed.",
+ __func__, reg, val);
+
+ return -EINVAL;
+}
+
+#endif
+
+static int ov7620_read(struct v4l2_subdev *sd, unsigned char reg,
+ unsigned char *value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+#if 0
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret >= 0) {
+ *value = (unsigned char)ret;
+ ret = 0;
+ }
+#else
+ ret = ioh_video_in_read_value(client, reg, value);
+#endif
+ return ret;
+}
+static int ov7620_write(struct v4l2_subdev *sd, unsigned char reg,
+ unsigned char value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+#if 0
+ int ret = i2c_smbus_write_byte_data(client, reg, value);
+#else
+ int ret = ioh_video_in_write_value(client, reg, value);
+#endif
+
+ if (reg == REG_COMA && (value & COMA_RESET))
+ msleep(2); /* Wait for reset to run */
+
+ return ret;
+}
+
+
+/*
+ * Write a list of register settings; ff/ff stops the process.
+ */
+static int ov7620_write_array(struct v4l2_subdev *sd, struct regval_list *vals)
+{
+ while (vals->reg_num != 0xff || vals->value != 0xff) {
+ int ret = ov7620_write(sd, vals->reg_num, vals->value);
+ if (ret < 0)
+ return ret;
+ vals++;
+ }
+ return 0;
+}
+
+
+/*
+ * Stuff that knows about the sensor.
+ */
+static int ov7620_reset(struct v4l2_subdev *sd, u32 val)
+{
+ ov7620_write(sd, REG_COMA, COMA_RESET);
+ msleep(1);
+ return 0;
+}
+
+
+static int ov7620_init(struct v4l2_subdev *sd, u32 val)
+{
+ return ov7620_write_array(sd, ov7620_default_regs);
+}
+
+
+static int ov7620_detect(struct v4l2_subdev *sd)
+{
+ unsigned char v;
+ int ret;
+
+ ret = ov7620_init(sd, 0);
+ if (ret < 0)
+ return ret;
+ ret = ov7620_read(sd, REG_MIDH, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x7f) /* OV manuf. id. */
+ return -ENODEV;
+ ret = ov7620_read(sd, REG_MIDL, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0xa2)
+ return -ENODEV;
+ return 0;
+}
+
+static struct ov7620_format_struct {
+ enum v4l2_mbus_pixelcode mbus_code;
+ enum v4l2_colorspace colorspace;
+ struct regval_list *regs;
+} ov7620_formats[] = {
+ {
+ .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .regs = ov7620_fmt_yuv422,
+ },
+};
+#define N_OV7620_FMTS ARRAY_SIZE(ov7620_formats)
+
+
+/*
+ * Then there is the issue of window sizes. Try to capture the info here.
+ */
+
+static struct regval_list ov7620_vga_regs[] = {
+ { 0xff, 0xff },
+};
+
+static struct regval_list ov7620_qvga_regs[] = {
+ { 0xff, 0xff },
+};
+
+static struct ov7620_win_size {
+ int width;
+ int height;
+ unsigned char comc_bit;
+ int hstart;
+ int hstop;
+ int vstart;
+ int vstop;
+ struct regval_list *regs; /* Regs to tweak */
+/* h/vref stuff */
+} ov7620_win_sizes[] = {
+ /* VGA */
+ {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .comc_bit = 0,
+ .hstart = 0x2f,
+ .hstop = 0xcf,
+ .vstart = 0x06,
+ .vstop = 0xf5,
+ .regs = ov7620_vga_regs,
+ },
+ /* QVGA */
+ {
+ .width = QVGA_WIDTH,
+ .height = QVGA_HEIGHT,
+ .comc_bit = COMC_FMT_QVGA,
+ .hstart = 0x2f,
+ .hstop = 0xcf,
+ .vstart = 0x06,
+ .vstop = 0xf5,
+ .regs = ov7620_qvga_regs,
+ },
+};
+
+#define N_WIN_SIZES (ARRAY_SIZE(ov7620_win_sizes))
+
+
+/*
+ * Store a set of start/stop values into the camera.
+ */
+static int ov7620_set_hw(struct v4l2_subdev *sd, int hstart, int hstop,
+ int vstart, int vstop)
+{
+ int ret;
+
+ ret = ov7620_write(sd, REG_HSTART, hstart);
+ ret += ov7620_write(sd, REG_HSTOP, hstop);
+
+ ret += ov7620_write(sd, REG_VSTART, vstart);
+ ret += ov7620_write(sd, REG_VSTOP, vstop);
+ return ret;
+}
+
+static int ov7620_try_fmt_internal(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt,
+ struct ov7620_format_struct **ret_fmt,
+ struct ov7620_win_size **ret_wsize)
+{
+ int index;
+ struct ov7620_win_size *wsize;
+
+ for (index = 0; index < N_OV7620_FMTS; index++)
+ if (ov7620_formats[index].mbus_code == fmt->code)
+ break;
+ if (index >= N_OV7620_FMTS) {
+ /* default to first format */
+ index = 0;
+ fmt->code = ov7620_formats[0].mbus_code;
+ }
+ if (ret_fmt != NULL)
+ *ret_fmt = ov7620_formats + index;
+
+ fmt->field = V4L2_FIELD_NONE;
+
+ for (wsize = ov7620_win_sizes;
+ wsize < ov7620_win_sizes + N_WIN_SIZES; wsize++)
+ if (fmt->width >= wsize->width && fmt->height >= wsize->height)
+ break;
+ if (wsize >= ov7620_win_sizes + N_WIN_SIZES)
+ wsize--; /* Take the smallest one */
+ if (ret_wsize != NULL)
+ *ret_wsize = wsize;
+ /*
+ * Note the size we'll actually handle.
+ */
+ fmt->width = wsize->width;
+ fmt->height = wsize->height;
+ fmt->colorspace = ov7620_formats[index].colorspace;
+
+ return 0;
+}
+
+static int ov7620_try_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ return ov7620_try_fmt_internal(sd, fmt, NULL, NULL);
+}
+
+/*
+ * Set a format.
+ */
+static int ov7620_s_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ int ret;
+ struct ov7620_format_struct *ovfmt;
+ struct ov7620_win_size *wsize;
+ struct ov7620_info *info = to_state(sd);
+ unsigned char comc;
+
+ ret = ov7620_try_fmt_internal(sd, fmt, &ovfmt, &wsize);
+ if (ret)
+ return ret;
+
+ /* Reset */
+ ov7620_reset(sd, 0);
+
+ comc = ovfmt->regs[0].value;
+ comc |= wsize->comc_bit;
+ ov7620_write(sd, REG_COMC, comc);
+ /*
+ * Now write the rest of the array. Also store start/stops
+ */
+ ov7620_write_array(sd, ovfmt->regs + 1);
+ ov7620_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart,
+ wsize->vstop);
+ ret = 0;
+ if (wsize->regs)
+ ret = ov7620_write_array(sd, wsize->regs);
+ info->fmt = ovfmt;
+
+ return ret;
+}
+
+
+/*
+ * Code for dealing with controls.
+ */
+
+static int ov7620_s_brightness(struct v4l2_subdev *sd, int value)
+{
+ unsigned char comj = 0;
+ int ret;
+
+ ov7620_read(sd, REG_COMJ, &comj);
+ comj &= ~COMJ_4;
+ ov7620_write(sd, REG_COMJ, comj);
+
+ ret = ov7620_write(sd, REG_BRIGHT, value);
+ return ret;
+}
+
+static int ov7620_g_brightness(struct v4l2_subdev *sd, __s32 *value)
+{
+ unsigned char v = 0;
+ int ret = ov7620_read(sd, REG_BRIGHT, &v);
+
+ return ret;
+}
+
+static int ov7620_queryctrl(struct v4l2_subdev *sd,
+ struct v4l2_queryctrl *qc)
+{
+ /* Fill in min, max, step and default value for these controls. */
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ov7620_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return ov7620_g_brightness(sd, &ctrl->value);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ov7620_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return ov7620_s_brightness(sd, ctrl->value);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ov7620_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0);
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov7620_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ unsigned char val = 0;
+ int ret;
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ ret = ov7620_read(sd, reg->reg & 0xff, &val);
+ reg->val = val;
+ reg->size = 1;
+ return ret;
+}
+
+static int ov7620_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ ov7620_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ return 0;
+}
+#endif
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops ov7620_core_ops = {
+ .g_chip_ident = ov7620_g_chip_ident,
+ .g_ctrl = ov7620_g_ctrl,
+ .s_ctrl = ov7620_s_ctrl,
+ .queryctrl = ov7620_queryctrl,
+ .reset = ov7620_reset,
+ .init = ov7620_init,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ov7620_g_register,
+ .s_register = ov7620_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops ov7620_video_ops = {
+ .try_mbus_fmt = ov7620_try_mbus_fmt,
+ .s_mbus_fmt = ov7620_s_mbus_fmt,
+};
+
+static const struct v4l2_subdev_ops ov7620_ops = {
+ .core = &ov7620_core_ops,
+ .video = &ov7620_video_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int ov7620_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct ov7620_info *info;
+ int ret;
+
+ info = kzalloc(sizeof(struct ov7620_info), GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+ sd = &info->sd;
+ v4l2_i2c_subdev_init(sd, client, &ov7620_ops);
+
+ /* Make sure it's an ov7620 */
+ ret = ov7620_detect(sd);
+ if (ret) {
+ v4l_dbg(1, debug, client,
+ "chip found @ 0x%x (%s) is not an ov7620 chip.\n",
+ client->addr << 1, client->adapter->name);
+ kfree(info);
+ return ret;
+ }
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ info->fmt = &ov7620_formats[0];
+ info->sat = 128; /* Review this */
+
+ return 0;
+}
+
+
+static int ov7620_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id ov7620_id[] = {
+ { "ioh_i2c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ov7620_id);
+
+static struct i2c_driver ov7620_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ioh_i2c",
+ },
+ .probe = ov7620_probe,
+ .remove = ov7620_remove,
+ .id_table = ov7620_id,
+};
+
+static __init int init_ov7620(void)
+{
+ return i2c_add_driver(&ov7620_driver);
+}
+
+static __exit void exit_ov7620(void)
+{
+ i2c_del_driver(&ov7620_driver);
+}
+
+module_init(init_ov7620);
+module_exit(exit_ov7620);
+
+
diff --git a/drivers/media/video/ioh_video_in_ov9653.c b/drivers/media/video/ioh_video_in_ov9653.c
new file mode 100644
index 0000000..7a35e32
--- /dev/null
+++ b/drivers/media/video/ioh_video_in_ov9653.c
@@ -0,0 +1,818 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+MODULE_DESCRIPTION("IOH video-in driver for OmniVision ov9653 sensor.");
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+/*
+ * Basic window sizes. These probably belong somewhere more globally
+ * useful.
+ */
+#define HDTV_WIDTH 1280
+#define HDTV_HEIGHT 720
+
+/* Registers */
+#define REG_COM1 0x04 /* Control 1 */
+
+#define REG_COM7 0x12 /* Control 7 */
+#define COM7_RESET 0x80 /* Register reset */
+#define COM7_FMT_HDTV 0x00
+#define COM7_FMT_VGA 0x40 /* VGA format */
+#define COM7_FMT_CIF 0x20 /* CIF format */
+#define COM7_FMT_QVGA 0x10 /* QVGA format */
+#define COM7_FMT_QCIF 0x08 /* QCIF format */
+#define REG_COM8 0x13 /* Control 8 */
+#define COM8_AEC 0x01 /* Auto exposure enable */
+
+
+#define REG_PID 0x0a /* Product ID MSB */
+#define REG_VER 0x0b /* Product ID LSB */
+
+#define REG_MIDH 0x1c /* Manuf. ID high */
+#define REG_MIDL 0x1d /* Manuf. ID low */
+
+#define REG_HSTART 0x17 /* Horiz start high bits */
+#define REG_HSTOP 0x18 /* Horiz stop high bits */
+#define REG_VSTART 0x19 /* Vert start high bits */
+#define REG_VSTOP 0x1a /* Vert stop high bits */
+
+#define REG_HREF 0x32 /* HREF pieces */
+#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */
+
+#define REG_AECHM 0xa1 /* AEC MSC 5bit */
+#define REG_AECH 0x10 /* AEC value */
+
+
+/*
+ * Information we maintain about a known sensor.
+ */
+struct ov9653_format_struct; /* coming later */
+struct ov9653_info {
+ struct v4l2_subdev sd;
+ struct ov9653_format_struct *fmt; /* Current format */
+ unsigned char sat; /* Saturation value */
+ int hue; /* Hue value */
+};
+
+static inline struct ov9653_info *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ov9653_info, sd);
+}
+
+
+
+/*
+ * The default register settings.
+ */
+
+struct regval_list {
+ unsigned char reg_num;
+ unsigned char value;
+};
+
+static struct regval_list ov9653_default_regs[] = {
+ { REG_COM7, 0x00 },
+ { 0x11, 0x80 },
+ { 0x39, 0x43 },
+ { 0x38, 0x12 },
+ { 0x0e, 0x00 },
+ { 0x13, 0xc7 },
+ { 0x1e, 0x34 },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x00, 0x00 },
+ { 0x10, 0xf0 },
+ { 0x1b, 0x00 },
+ { 0x16, 0x06 },
+ { 0x33, 0x10 },
+ { 0x34, 0xbf },
+ { 0xa8, 0x81 },
+ { 0x41, 0x10 },
+ { 0x96, 0x04 },
+ { 0x3d, 0x19 },
+ { 0x3a, 0x01 },
+ { 0x1b, 0x01 },
+ { 0x8e, 0x00 },
+ { 0x3c, 0x60 },
+ { 0x8f, 0xcf },
+ { 0x8b, 0x06 },
+ { 0x35, 0x91 },
+ { 0x94, 0x99 },
+ { 0x95, 0x99 },
+ { 0x40, 0xc1 },
+ { 0x29, 0x2f },
+ { 0x0f, 0x42 },
+ { 0x3a, 0x01 },
+ { 0xa5, 0x80 },
+ { 0x41, 0x00 },
+ { 0x13, 0xc5 },
+ { 0x3d, 0x92 },
+ { 0x69, 0x80 },
+ { 0x5c, 0x96 },
+ { 0x5d, 0x96 },
+ { 0x5e, 0x10 },
+ { 0x59, 0xeb },
+ { 0x5a, 0x9c },
+ { 0x5b, 0x55 },
+ { 0x43, 0xf0 },
+ { 0x44, 0x10 },
+ { 0x45, 0x55 },
+ { 0x46, 0x86 },
+ { 0x47, 0x64 },
+ { 0x48, 0x86 },
+ { 0x5f, 0xf0 },
+ { 0x60, 0x8c },
+ { 0x61, 0x20 },
+ { 0xa5, 0xd9 },
+ { 0xa4, 0x74 },
+ { 0x8d, 0x02 },
+ { 0x13, 0xc7 },
+ { 0x4f, 0x46 },
+ { 0x50, 0x36 },
+ { 0x51, 0x0f },
+ { 0x52, 0x17 },
+ { 0x53, 0x7f },
+ { 0x54, 0x96 },
+ { 0x41, 0x32 },
+ { 0x8c, 0x23 },
+ { 0x3d, 0x92 },
+ { 0x3e, 0x02 },
+ { 0xa9, 0x97 },
+ { 0x3a, 0x00 },
+ { 0x8f, 0xcf },
+ { 0x90, 0x00 },
+ { 0x91, 0x00 },
+ { 0x9f, 0x00 },
+ { 0xa0, 0x00 },
+ { 0x3a, 0x0d },
+ { 0x94, 0x88 },
+ { 0x95, 0x88 },
+ { 0x24, 0x68 },
+ { 0x25, 0x5c },
+ { 0x26, 0xc3 },
+ { 0x3b, 0x19 },
+ { 0x14, 0x2a },
+ { 0x3f, 0xa6 },
+ { 0x6a, 0x21 },
+ { 0xff, 0xff }, /* end */
+};
+
+
+static struct regval_list ov9653_fmt_yuv422[] = {
+ { REG_COM7, 0x00 },
+ { 0x11, 0x80 },
+ { 0x39, 0x43 },
+ { 0x38, 0x12 },
+ { 0x0e, 0x00 },
+ { 0x13, 0xc7 },
+ { 0x1e, 0x34 },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x00, 0x00 },
+ { 0x10, 0xf0 },
+ { 0x1b, 0x00 },
+ { 0x16, 0x06 },
+ { 0x33, 0x10 },
+ { 0x34, 0xbf },
+ { 0xa8, 0x81 },
+ { 0x41, 0x10 },
+ { 0x96, 0x04 },
+ { 0x3d, 0x19 },
+ { 0x3a, 0x01 },
+ { 0x1b, 0x01 },
+ { 0x8e, 0x00 },
+ { 0x3c, 0x60 },
+ { 0x8f, 0xcf },
+ { 0x8b, 0x06 },
+ { 0x35, 0x91 },
+ { 0x94, 0x99 },
+ { 0x95, 0x99 },
+ { 0x40, 0xc1 },
+ { 0x29, 0x2f },
+ { 0x0f, 0x42 },
+ { 0x3a, 0x01 },
+ { 0xa5, 0x80 },
+ { 0x41, 0x00 },
+ { 0x13, 0xc5 },
+ { 0x3d, 0x92 },
+ { 0x69, 0x80 },
+ { 0x5c, 0x96 },
+ { 0x5d, 0x96 },
+ { 0x5e, 0x10 },
+ { 0x59, 0xeb },
+ { 0x5a, 0x9c },
+ { 0x5b, 0x55 },
+ { 0x43, 0xf0 },
+ { 0x44, 0x10 },
+ { 0x45, 0x55 },
+ { 0x46, 0x86 },
+ { 0x47, 0x64 },
+ { 0x48, 0x86 },
+ { 0x5f, 0xf0 },
+ { 0x60, 0x8c },
+ { 0x61, 0x20 },
+ { 0xa5, 0xd9 },
+ { 0xa4, 0x74 },
+ { 0x8d, 0x02 },
+ { 0x13, 0xc7 },
+ { 0x4f, 0x46 },
+ { 0x50, 0x36 },
+ { 0x51, 0x0f },
+ { 0x52, 0x17 },
+ { 0x53, 0x7f },
+ { 0x54, 0x96 },
+ { 0x41, 0x32 },
+ { 0x8c, 0x23 },
+ { 0x3d, 0x92 },
+ { 0x3e, 0x02 },
+ { 0xa9, 0x97 },
+ { 0x3a, 0x00 },
+ { 0x8f, 0xcf },
+ { 0x90, 0x00 },
+ { 0x91, 0x00 },
+ { 0x9f, 0x00 },
+ { 0xa0, 0x00 },
+ { 0x3a, 0x0d },
+ { 0x94, 0x88 },
+ { 0x95, 0x88 },
+ { 0x24, 0x68 },
+ { 0x25, 0x5c },
+ { 0x26, 0xc3 },
+ { 0x3b, 0x19 },
+ { 0x14, 0x2a },
+ { 0x3f, 0xa6 },
+ { 0x6a, 0x21 },
+ { 0xff, 0xff }, /* end */
+};
+
+
+/*
+ * Low-level register I/O.
+ */
+
+#if 1
+static int ioh_video_in_read_value(struct i2c_client *client, u8 reg, u8 *val)
+{
+ u8 data = 0;
+
+ client->flags = 0;
+ data = 0;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ client->flags = 0;
+ data = reg;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_recv(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ *val = data;
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) --> 0x%02X end.",
+ __func__, reg, *val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) 0x%02X read error failed.",
+ __func__, reg, *val);
+
+ return -EINVAL;
+}
+
+static int ioh_video_in_write_value(struct i2c_client *client, u8 reg, u8 val)
+{
+ u8 data = 0;
+ unsigned char data2[2] = { reg, val };
+
+ client->flags = 0;
+ data = 0;
+ if (i2c_master_send(client, &data, 1) != 1)
+ goto err;
+ msleep(2);
+
+ if (i2c_master_send(client, data2, 2) != 2)
+ goto err;
+ msleep(2);
+
+ v4l_dbg(1, debug, client, "Function %s A(0x%02X) <-- 0x%02X end.",
+ __func__, reg, val);
+
+ return 0;
+
+err:
+ v4l_err(client, "Function %s A(0x%02X) <-- 0x%02X write error failed.",
+ __func__, reg, val);
+
+ return -EINVAL;
+}
+
+#endif
+
+static int ov9653_read(struct v4l2_subdev *sd, unsigned char reg,
+ unsigned char *value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+#if 0
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret >= 0) {
+ *value = (unsigned char)ret;
+ ret = 0;
+ }
+#else
+ ret = ioh_video_in_read_value(client, reg, value);
+#endif
+ return ret;
+}
+static int ov9653_write(struct v4l2_subdev *sd, unsigned char reg,
+ unsigned char value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+#if 0
+ int ret = i2c_smbus_write_byte_data(client, reg, value);
+#else
+ int ret = ioh_video_in_write_value(client, reg, value);
+#endif
+
+ if (reg == REG_COM7 && (value & COM7_RESET))
+ msleep(2); /* Wait for reset to run */
+
+ return ret;
+}
+
+
+/*
+ * Write a list of register settings; ff/ff stops the process.
+ */
+static int ov9653_write_array(struct v4l2_subdev *sd, struct regval_list *vals)
+{
+ while (vals->reg_num != 0xff || vals->value != 0xff) {
+ int ret = ov9653_write(sd, vals->reg_num, vals->value);
+ if (ret < 0)
+ return ret;
+ vals++;
+ }
+ return 0;
+}
+
+
+/*
+ * Stuff that knows about the sensor.
+ */
+static int ov9653_reset(struct v4l2_subdev *sd, u32 val)
+{
+ ov9653_write(sd, REG_COM7, COM7_RESET);
+ msleep(1);
+ return 0;
+}
+
+
+static int ov9653_init(struct v4l2_subdev *sd, u32 val)
+{
+ return ov9653_write_array(sd, ov9653_default_regs);
+}
+
+
+static int ov9653_detect(struct v4l2_subdev *sd)
+{
+ unsigned char v;
+ int ret;
+
+ ret = ov9653_init(sd, 0);
+ if (ret < 0)
+ return ret;
+ ret = ov9653_read(sd, REG_MIDH, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x7f) /* OV manuf. id. */
+ return -ENODEV;
+ ret = ov9653_read(sd, REG_MIDL, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0xa2)
+ return -ENODEV;
+
+ ret = ov9653_read(sd, REG_PID, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x96) /* PID + VER = 0x96 / 0x52 */
+ return -ENODEV;
+ ret = ov9653_read(sd, REG_VER, &v);
+ if (ret < 0)
+ return ret;
+ if (v != 0x52) /* PID + VER = 0x96 / 0x52 */
+ return -ENODEV;
+ return 0;
+}
+
+static struct ov9653_format_struct {
+ enum v4l2_mbus_pixelcode mbus_code;
+ enum v4l2_colorspace colorspace;
+ struct regval_list *regs;
+} ov9653_formats[] = {
+ {
+ .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .regs = ov9653_fmt_yuv422,
+ },
+};
+#define N_OV9653_FMTS ARRAY_SIZE(ov9653_formats)
+
+static struct regval_list ov9653_hdtv_regs[] = {
+ { 0xff, 0xff },
+};
+
+
+static struct ov9653_win_size {
+ int width;
+ int height;
+ unsigned char com7_bit;
+ int hstart;
+ int hstop;
+ int vstart;
+ int vstop;
+ struct regval_list *regs; /* Regs to tweak */
+/* h/vref stuff */
+} ov9653_win_sizes[] = {
+ /* HDTV */
+ {
+ .width = HDTV_WIDTH,
+ .height = HDTV_HEIGHT,
+ .com7_bit = COM7_FMT_HDTV,
+ .hstart = 238,
+ .hstop = 1518,
+ .vstart = 130,
+ .vstop = 850,
+ .regs = ov9653_hdtv_regs,
+ },
+};
+
+#define N_WIN_SIZES (ARRAY_SIZE(ov9653_win_sizes))
+
+
+/*
+ * Store a set of start/stop values into the camera.
+ */
+static int ov9653_set_hw(struct v4l2_subdev *sd, int hstart, int hstop,
+ int vstart, int vstop)
+{
+ int ret;
+ unsigned char v;
+
+ ret = ov9653_write(sd, REG_HSTART, (hstart >> 3) & 0xff);
+ ret += ov9653_write(sd, REG_HSTOP, (hstop >> 3) & 0xff);
+ ret += ov9653_read(sd, REG_HREF, &v);
+ v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
+ msleep(10);
+ ret += ov9653_write(sd, REG_HREF, v);
+
+ ret += ov9653_write(sd, REG_VSTART, (vstart >> 3) & 0xff);
+ ret += ov9653_write(sd, REG_VSTOP, (vstop >> 3) & 0xff);
+ ret += ov9653_read(sd, REG_VREF, &v);
+ v = (v & 0xc0) | ((vstop & 0x7) << 3) | (vstart & 0x7);
+ msleep(10);
+ ret += ov9653_write(sd, REG_VREF, v);
+ return ret;
+}
+
+static int ov9653_try_fmt_internal(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt,
+ struct ov9653_format_struct **ret_fmt,
+ struct ov9653_win_size **ret_wsize)
+{
+ int index;
+ struct ov9653_win_size *wsize;
+
+ for (index = 0; index < N_OV9653_FMTS; index++)
+ if (ov9653_formats[index].mbus_code == fmt->code)
+ break;
+ if (index >= N_OV9653_FMTS) {
+ /* default to first format */
+ index = 0;
+ fmt->code = ov9653_formats[0].mbus_code;
+ }
+ if (ret_fmt != NULL)
+ *ret_fmt = ov9653_formats + index;
+
+ fmt->field = V4L2_FIELD_NONE;
+
+ for (wsize = ov9653_win_sizes;
+ wsize < ov9653_win_sizes + N_WIN_SIZES; wsize++)
+ if (fmt->width >= wsize->width && fmt->height >= wsize->height)
+ break;
+ if (wsize >= ov9653_win_sizes + N_WIN_SIZES)
+ wsize--; /* Take the smallest one */
+ if (ret_wsize != NULL)
+ *ret_wsize = wsize;
+ /*
+ * Note the size we'll actually handle.
+ */
+ fmt->width = wsize->width;
+ fmt->height = wsize->height;
+ fmt->colorspace = ov9653_formats[index].colorspace;
+
+ return 0;
+}
+
+static int ov9653_try_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ return ov9653_try_fmt_internal(sd, fmt, NULL, NULL);
+}
+
+/*
+ * Set a format.
+ */
+static int ov9653_s_mbus_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ int ret;
+ struct ov9653_format_struct *ovfmt;
+ struct ov9653_win_size *wsize;
+ struct ov9653_info *info = to_state(sd);
+ unsigned char com7;
+
+ ret = ov9653_try_fmt_internal(sd, fmt, &ovfmt, &wsize);
+ if (ret)
+ return ret;
+
+ /* Reset */
+ ov9653_reset(sd, 0);
+
+ com7 = ovfmt->regs[0].value;
+ com7 |= wsize->com7_bit;
+ ov9653_write(sd, REG_COM7, com7);
+ /*
+ * Now write the rest of the array. Also store start/stops
+ */
+ ov9653_write_array(sd, ovfmt->regs + 1);
+ ov9653_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart,
+ wsize->vstop);
+ ret = 0;
+ if (wsize->regs)
+ ret = ov9653_write_array(sd, wsize->regs);
+ info->fmt = ovfmt;
+
+ return ret;
+}
+
+
+/*
+ * Code for dealing with controls.
+ */
+
+static int ov9653_s_brightness(struct v4l2_subdev *sd, int value)
+{
+ unsigned char com8 = 0, v;
+ int ret;
+
+ ov9653_read(sd, REG_COM8, &com8);
+ com8 &= ~COM8_AEC;
+ ov9653_write(sd, REG_COM8, com8);
+
+ ret = ov9653_write(sd, REG_AECH, (value >> 2) & 0xff);
+ ret += ov9653_write(sd, REG_AECHM, (value >> 10) & 0x3f);
+ ret += ov9653_read(sd, REG_COM1, &v);
+ v = (v & 0xfc) | (value & 0x03);
+ msleep(10);
+ ret += ov9653_write(sd, REG_COM1, v);
+ return ret;
+}
+
+static int ov9653_g_brightness(struct v4l2_subdev *sd, __s32 *value)
+{
+ unsigned char v = 0;
+ int val = 0;
+ int ret;
+
+ ret = ov9653_read(sd, REG_COM1, &v);
+ val = v & 0x03;
+ ret += ov9653_read(sd, REG_AECH, &v);
+ val |= ((v & 0xff) << 2);
+ ret += ov9653_read(sd, REG_AECHM, &v);
+ val |= ((v & 0x3f) << 10);
+
+ *value = val;
+ return ret;
+}
+
+
+
+static int ov9653_queryctrl(struct v4l2_subdev *sd,
+ struct v4l2_queryctrl *qc)
+{
+ /* Fill in min, max, step and default value for these controls. */
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 65535, 1, 256);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ov9653_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return ov9653_g_brightness(sd, &ctrl->value);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ov9653_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return ov9653_s_brightness(sd, ctrl->value);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_VFLIP:
+ case V4L2_CID_HFLIP:
+ return -EINVAL;
+ }
+ return -EINVAL;
+}
+
+static int ov9653_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0);
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov9653_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ unsigned char val = 0;
+ int ret;
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ ret = ov9653_read(sd, reg->reg & 0xff, &val);
+ reg->val = val;
+ reg->size = 1;
+ return ret;
+}
+
+static int ov9653_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (!v4l2_chip_match_i2c_client(client, ®->match))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ ov9653_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ return 0;
+}
+#endif
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops ov9653_core_ops = {
+ .g_chip_ident = ov9653_g_chip_ident,
+ .g_ctrl = ov9653_g_ctrl,
+ .s_ctrl = ov9653_s_ctrl,
+ .queryctrl = ov9653_queryctrl,
+ .reset = ov9653_reset,
+ .init = ov9653_init,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ov9653_g_register,
+ .s_register = ov9653_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops ov9653_video_ops = {
+ .try_mbus_fmt = ov9653_try_mbus_fmt,
+ .s_mbus_fmt = ov9653_s_mbus_fmt,
+};
+
+static const struct v4l2_subdev_ops ov9653_ops = {
+ .core = &ov9653_core_ops,
+ .video = &ov9653_video_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int ov9653_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct v4l2_subdev *sd;
+ struct ov9653_info *info;
+ int ret;
+
+ info = kzalloc(sizeof(struct ov9653_info), GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+ sd = &info->sd;
+ v4l2_i2c_subdev_init(sd, client, &ov9653_ops);
+
+ /* Make sure it's an ov9653 */
+ ret = ov9653_detect(sd);
+ if (ret) {
+ v4l_dbg(1, debug, client,
+ "chip found @ 0x%x (%s) is not an ov9653 chip.\n",
+ client->addr << 1, client->adapter->name);
+ kfree(info);
+ return ret;
+ }
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ info->fmt = &ov9653_formats[0];
+ info->sat = 128; /* Review this */
+
+ return 0;
+}
+
+
+static int ov9653_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id ov9653_id[] = {
+ { "ioh_i2c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ov9653_id);
+
+static struct i2c_driver ov9653_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ioh_i2c",
+ },
+ .probe = ov9653_probe,
+ .remove = ov9653_remove,
+ .id_table = ov9653_id,
+};
+
+static __init int init_ov9653(void)
+{
+ return i2c_add_driver(&ov9653_driver);
+}
+
+static __exit void exit_ov9653(void)
+{
+ i2c_del_driver(&ov9653_driver);
+}
+
+module_init(init_ov9653);
+module_exit(exit_ov9653);
+
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists