linux-kernel - [PATCH v2.6.38-rc7] Revert "libata: ahci_start

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 14 May 2011 12:28:04 +0200
From:	Tejun Heo <tj@...nel.org>
To:	Linus Torvalds <torvalds@...ux-foundation.org>,
	Jeff Garzik <jgarzik@...ox.com>
Cc:	Michael Leun <lkml20100708@...ton.leun.net>,
	linux-ide@...r.kernel.org,
	Linux PM mailing list <linux-pm@...ts.linux-foundation.org>,
	LKML <linux-kernel@...r.kernel.org>,
	"Rafael J. Wysocki" <rjw@...k.pl>, Jeff Garzik <jgarzik@...ox.com>,
	Jian Peng <jipeng2005@...il.com>
Subject: [PATCH v2.6.38-rc7] Revert "libata: ahci_start_engine compliant to
 AHCI spec"

This reverts commit 270dac35c26433d06a89150c51e75ca0181ca7e4.

The commits causes command timeouts on AC plug/unplug.  It isn't yet
clear why.  As the commit was for a single rather obscure controller,
revert the change for now.

The problem was reported and bisected by Gu Rui in bug#34692.

 https://bugzilla.kernel.org/show_bug.cgi?id=34692

Also, reported by Rafael and Michael in the following thread.

 http://thread.gmane.org/gmane.linux.kernel/1138771

Signed-off-by: Tejun Heo <tj@...nel.org>
Reported-by: Gu Rui <chaos.proton@...il.com>
Reported-by: Rafael J. Wysocki <rjw@...k.pl>
Reported-by: Michael Leun <lkml20100708@...ton.leun.net>
Cc: Jian Peng <jipeng2005@...il.com>
Cc: Jeff Garzik <jgarzik@...ox.com>
---
As we're already in -rc7, I'm sending the revert patch to both Jeff
and Linus.

Thank you.

 drivers/ata/libahci.c |   21 ---------------------
 1 files changed, 0 insertions(+), 21 deletions(-)

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ff9d832..d38c40f 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -561,27 +561,6 @@ void ahci_start_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
-	u8 status;
-
-	status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
-	/*
-	 * At end of section 10.1 of AHCI spec (rev 1.3), it states
-	 * Software shall not set PxCMD.ST to 1 until it is determined
-	 * that a functoinal device is present on the port as determined by
-	 * PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h
-	 *
-	 * Even though most AHCI host controllers work without this check,
-	 * specific controller will fail under this condition
-	 */
-	if (status & (ATA_BUSY | ATA_DRQ))
-		return;
-	else {
-		ahci_scr_read(&ap->link, SCR_STATUS, &tmp);
-
-		if ((tmp & 0xf) != 0x3)
-			return;
-	}
 
 	/* start DMA */
 	tmp = readl(port_mmio + PORT_CMD);
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/