| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 May 2011 12:12:14 +0200
From: Peter Korsgaard <jacmet@...site.dk>
To: Benjamin Tissoires <benjamin.tissoires@...c.fr>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Henrik Rydberg <rydberg@...omail.se>,
Jiri Kosina <jkosina@...e.cz>,
Stephane Chatty <chatty@...-enac.fr>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] hid-multitouch: Add support for Lumio panels
>>>>> "Benjamin" == Benjamin Tissoires <benjamin.tissoires@...c.fr> writes:
Hi,
Benjamin> your device presents Contact ID, Tip Switch, In Range and
Benjamin> Confidence. I would say that Win 7 would treat it as a
Benjamin> multitouch screen, so this might work with
Benjamin> hid-multitouch. Please note that's the first time I see a
Benjamin> report descriptor with only one touch reported for a
Benjamin> multitouch screen.
Benjamin> For the configuration, the device may emulate a mouse by
Benjamin> default, and hid-multitouch is able to switch to the
Benjamin> multitouch mode. You will loose the right click, but it can
Benjamin> be enabled in gnome at least (accessibility settings).
Benjamin> Can you just replace in hid-ids.h:
Benjamin> - #define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
Benjamin> + #define USB_DEVICE_ID_CRYSTALTOUCH 0x0005
Benjamin> and see if it's working? If you prefer, I can make a new
Benjamin> patch, but I'll need to know which kernel you are running
Benjamin> (tree and branch). A 2.6.39 and above would be great.
I'm on 2.6.39. The patch doesn't apply cleanly, but I've fixed it up
manually (http://peter.korsgaard.com/lumio-2.6.29.patch).
hid-multitouch does get loaded, and everything looks OK:
usb 2-1.1: new full speed USB device number 4 using uhci_hcd
hid-multitouch 0003:202E:0005.0008: hiddev0: USB HID v1.10 Device [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input0
input: LUMIO Inc LUMIO CrystalTouch ver 1.1C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input18
hid-multitouch 0003:202E:0005.0009: input: USB HID v1.11 Keyboard [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input1
input: LUMIO Inc LUMIO CrystalTouch ver 1.1C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input19
hid-multitouch 0003:202E:0005.000A: input: USB HID v1.11 Mouse [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input2
input: LUMIO Inc LUMIO CrystalTouch ver 1.1C as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input20
hid-multitouch 0003:202E:0005.000B: input: USB HID v1.11 Device [LUMIO Inc LUMIO CrystalTouch ver 1.1C] on usb-0000:00:1d.0-1.1/input3
Evdev output is also different, but it doesn't seem to ever generate any
events when I touch the screen.
Before I had:
I: Bus=0003 Vendor=202e Product=0005 Version=0111
N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C"
P: Phys=usb-0000:00:1d.0-1.1/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input28
U: Uniq=
H: Handlers=mac-button-emul sysrq kbd event16
B: PROP=0
B: EV=100013
B: KEY=e080ffdf01cfffff fffffffffffffffe
B: MSC=10
I: Bus=0003 Vendor=202e Product=0005 Version=0111
N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C"
P: Phys=usb-0000:00:1d.0-1.1/input2
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input29
U: Uniq=
H: Handlers=mac-button-emul event17
B: PROP=0
B: EV=1f
B: KEY=70000 0 0 0 0
B: REL=200
B: ABS=3
B: MSC=10
I: Bus=0003 Vendor=202e Product=0005 Version=0111
N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C"
P: Phys=usb-0000:00:1d.0-1.1/input3
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input30
U: Uniq=
H: Handlers=mac-button-emul event18
B: PROP=0
B: EV=1b
B: KEY=420 1 0 0 0 0
B: ABS=10000000003
B: MSC=10
With event16 + event18 never generating any events, and event17 giving:
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x202e product 0x5 version 0x111
Input device name: "LUMIO Inc LUMIO CrystalTouch ver 1.1C"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 272 (LeftBtn)
Event code 273 (RightBtn)
Event code 274 (MiddleBtn)
Event type 2 (Relative)
Event code 9 (Misc)
Event type 3 (Absolute)
Event code 0 (X)
Value 650
Min 0
Max 4095
Event code 1 (Y)
Value 3221
Min 0
Max 4095
Event type 4 (Misc)
Event code 4 (ScanCode)
Testing ... (interrupt to exit)
Event: time 1305882024.934011, type 4 (Misc), code 4 (ScanCode), value 90001
Event: time 1305882024.934017, type 1 (Key), code 272 (LeftBtn), value 1
Event: time 1305882024.934029, type 3 (Absolute), code 0 (X), value 270
Event: time 1305882024.934034, type 3 (Absolute), code 1 (Y), value 1513
Event: time 1305882024.934039, type 2 (Relative), code 9 (Misc), value 1
Event: time 1305882024.934043, -------------- Report Sync ------------
Event: time 1305882024.943019, type 2 (Relative), code 9 (Misc), value 1
Event: time 1305882024.943025, -------------- Report Sync ------------
Event: time 1305882024.951998, type 3 (Absolute), code 0 (X), value 275
Event: time 1305882024.952006, type 3 (Absolute), code 1 (Y), value 1519
Event: time 1305882024.952010, type 2 (Relative), code 9 (Misc), value 1
Event: time 1305882024.952014, -------------- Report Sync ------------
Now with hid-multitouch I have:
I: Bus=0003 Vendor=202e Product=0005 Version=0111
N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C"
P: Phys=usb-0000:00:1d.0-1.1/input1
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input18
U: Uniq=
H: Handlers=mac-button-emul event16
B: PROP=0
B: EV=100003
B: KEY=0
I: Bus=0003 Vendor=202e Product=0005 Version=0111
N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C"
P: Phys=usb-0000:00:1d.0-1.1/input2
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input19
U: Uniq=
H: Handlers=mac-button-emul event17
B: PROP=0
B: EV=b
B: KEY=0
B: ABS=60000000000003
I: Bus=0003 Vendor=202e Product=0005 Version=0111
N: Name="LUMIO Inc LUMIO CrystalTouch ver 1.1C"
P: Phys=usb-0000:00:1d.0-1.1/input3
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input20
U: Uniq=
H: Handlers=mac-button-emul event18
B: PROP=0
B: EV=b
B: KEY=400 0 0 0 0 0
B: ABS=60000000000003
And event17:
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x202e product 0x5 version 0x111
Input device name: "LUMIO Inc LUMIO CrystalTouch ver 1.1C"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event type 3 (Absolute)
Event code 0 (X)
Value 0
Min 0
Max 4095
Event code 1 (Y)
Value 0
Min 0
Max 4095
Event code 53 (?)
Value 0
Min 0
Max 4095
Event code 54 (?)
Value 0
Min 0
Max 4095
Testing ... (interrupt to exit)
Event: time 1305886175.641112, -------------- Report Sync ------------
And then nothing. Any idea about how to progress?
--
Bye, Peter Korsgaard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists