| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 10 Jul 2011 16:35:27 +0100
From: Mark Einon <mark.einon@...il.com>
To: gregkh@...e.de
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
o.hartmann@...ovital.com, Mark Einon <mark.einon@...il.com>
Subject: [PATCH 02/10] staging: et131x: Converting et1310_phy.c function and local names from CamelCase
Tested on an ET-131x device.
Signed-off-by: Mark Einon <mark.einon@...il.com>
---
drivers/staging/et131x/et1310_mac.c | 10 +-
drivers/staging/et131x/et1310_phy.c | 402 +++++++++++++++----------------
drivers/staging/et131x/et131x.h | 35 ++--
drivers/staging/et131x/et131x_initpci.c | 14 +-
drivers/staging/et131x/et131x_isr.c | 9 +-
drivers/staging/et131x/et131x_netdev.c | 4 +-
6 files changed, 234 insertions(+), 240 deletions(-)
diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c
index db34c79..21b6153 100644
--- a/drivers/staging/et131x/et1310_mac.c
+++ b/drivers/staging/et131x/et1310_mac.c
@@ -451,11 +451,11 @@ void config_flow_control(struct et131x_adapter *etdev)
} else {
char remote_pause, remote_async_pause;
- ET1310_PhyAccessMiBit(etdev,
- TRUEPHY_BIT_READ, 5, 10, &remote_pause);
- ET1310_PhyAccessMiBit(etdev,
- TRUEPHY_BIT_READ, 5, 11,
- &remote_async_pause);
+ et1310_phy_access_mii_bit(etdev,
+ TRUEPHY_BIT_READ, 5, 10, &remote_pause);
+ et1310_phy_access_mii_bit(etdev,
+ TRUEPHY_BIT_READ, 5, 11,
+ &remote_async_pause);
if ((remote_pause == TRUEPHY_BIT_SET) &&
(remote_async_pause == TRUEPHY_BIT_SET)) {
diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c
index d5b02a8..d53656b 100644
--- a/drivers/staging/et131x/et1310_phy.c
+++ b/drivers/staging/et131x/et1310_phy.c
@@ -93,39 +93,36 @@
#include "et131x.h"
-/* Prototypes for functions with local scope */
-static void et131x_xcvr_init(struct et131x_adapter *etdev);
-
/**
- * PhyMiRead - Read from the PHY through the MII Interface on the MAC
+ * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
* @etdev: pointer to our private adapter structure
- * @xcvrAddr: the address of the transceiver
- * @xcvrReg: the register to read
+ * @xcvr_addr: the address of the transceiver
+ * @xcvr_reg: the register to read
* @value: pointer to a 16-bit value in which the value will be stored
*
* Returns 0 on success, errno on failure (as defined in errno.h)
*/
-int PhyMiRead(struct et131x_adapter *etdev, u8 xcvrAddr,
- u8 xcvrReg, u16 *value)
+int et131x_phy_mii_read(struct et131x_adapter *etdev, u8 xcvr_addr,
+ u8 xcvr_reg, u16 *value)
{
struct mac_regs __iomem *mac = &etdev->regs->mac;
int status = 0;
u32 delay;
- u32 miiAddr;
- u32 miiCmd;
- u32 miiIndicator;
+ u32 mii_addr;
+ u32 mii_cmd;
+ u32 mii_indicator;
/* Save a local copy of the registers we are dealing with so we can
* set them back
*/
- miiAddr = readl(&mac->mii_mgmt_addr);
- miiCmd = readl(&mac->mii_mgmt_cmd);
+ mii_addr = readl(&mac->mii_mgmt_addr);
+ mii_cmd = readl(&mac->mii_mgmt_cmd);
/* Stop the current operation */
writel(0, &mac->mii_mgmt_cmd);
/* Set up the register we need to read from on the correct PHY */
- writel(MII_ADDR(xcvrAddr, xcvrReg), &mac->mii_mgmt_addr);
+ writel(MII_ADDR(xcvr_addr, xcvr_reg), &mac->mii_mgmt_addr);
/* Kick the read cycle off */
delay = 0;
@@ -135,15 +132,15 @@ int PhyMiRead(struct et131x_adapter *etdev, u8 xcvrAddr,
do {
udelay(50);
delay++;
- miiIndicator = readl(&mac->mii_mgmt_indicator);
- } while ((miiIndicator & MGMT_WAIT) && delay < 50);
+ mii_indicator = readl(&mac->mii_mgmt_indicator);
+ } while ((mii_indicator & MGMT_WAIT) && delay < 50);
/* If we hit the max delay, we could not read the register */
if (delay == 50) {
dev_warn(&etdev->pdev->dev,
- "xcvrReg 0x%08x could not be read\n", xcvrReg);
+ "xcvrReg 0x%08x could not be read\n", xcvr_reg);
dev_warn(&etdev->pdev->dev, "status is 0x%08x\n",
- miiIndicator);
+ mii_indicator);
status = -EIO;
}
@@ -158,43 +155,43 @@ int PhyMiRead(struct et131x_adapter *etdev, u8 xcvrAddr,
/* set the registers we touched back to the state at which we entered
* this function
*/
- writel(miiAddr, &mac->mii_mgmt_addr);
- writel(miiCmd, &mac->mii_mgmt_cmd);
+ writel(mii_addr, &mac->mii_mgmt_addr);
+ writel(mii_cmd, &mac->mii_mgmt_cmd);
return status;
}
/**
- * MiWrite - Write to a PHY register through the MII interface of the MAC
+ * et131x_mii_write - Write to a PHY register through the MII interface of the MAC
* @etdev: pointer to our private adapter structure
- * @xcvrReg: the register to read
+ * @xcvr_reg: the register to read
* @value: 16-bit value to write
*
* FIXME: one caller in netdev still
*
* Return 0 on success, errno on failure (as defined in errno.h)
*/
-int MiWrite(struct et131x_adapter *etdev, u8 xcvrReg, u16 value)
+int et131x_mii_write(struct et131x_adapter *etdev, u8 xcvr_reg, u16 value)
{
struct mac_regs __iomem *mac = &etdev->regs->mac;
int status = 0;
- u8 xcvrAddr = etdev->stats.xcvr_addr;
+ u8 xcvr_addr = etdev->stats.xcvr_addr;
u32 delay;
- u32 miiAddr;
- u32 miiCmd;
- u32 miiIndicator;
+ u32 mii_addr;
+ u32 mii_cmd;
+ u32 mii_indicator;
/* Save a local copy of the registers we are dealing with so we can
* set them back
*/
- miiAddr = readl(&mac->mii_mgmt_addr);
- miiCmd = readl(&mac->mii_mgmt_cmd);
+ mii_addr = readl(&mac->mii_mgmt_addr);
+ mii_cmd = readl(&mac->mii_mgmt_cmd);
/* Stop the current operation */
writel(0, &mac->mii_mgmt_cmd);
/* Set up the register we need to write to on the correct PHY */
- writel(MII_ADDR(xcvrAddr, xcvrReg), &mac->mii_mgmt_addr);
+ writel(MII_ADDR(xcvr_addr, xcvr_reg), &mac->mii_mgmt_addr);
/* Add the value to write to the registers to the mac */
writel(value, &mac->mii_mgmt_ctrl);
@@ -203,32 +200,33 @@ int MiWrite(struct et131x_adapter *etdev, u8 xcvrReg, u16 value)
do {
udelay(50);
delay++;
- miiIndicator = readl(&mac->mii_mgmt_indicator);
- } while ((miiIndicator & MGMT_BUSY) && delay < 100);
+ mii_indicator = readl(&mac->mii_mgmt_indicator);
+ } while ((mii_indicator & MGMT_BUSY) && delay < 100);
/* If we hit the max delay, we could not write the register */
if (delay == 100) {
- u16 TempValue;
+ u16 tmp;
dev_warn(&etdev->pdev->dev,
- "xcvrReg 0x%08x could not be written", xcvrReg);
+ "xcvrReg 0x%08x could not be written", xcvr_reg);
dev_warn(&etdev->pdev->dev, "status is 0x%08x\n",
- miiIndicator);
+ mii_indicator);
dev_warn(&etdev->pdev->dev, "command is 0x%08x\n",
readl(&mac->mii_mgmt_cmd));
- MiRead(etdev, xcvrReg, &TempValue);
+ et131x_mii_read(etdev, xcvr_reg, &tmp);
status = -EIO;
}
/* Stop the write operation */
writel(0, &mac->mii_mgmt_cmd);
- /* set the registers we touched back to the state at which we entered
+ /*
+ * set the registers we touched back to the state at which we entered
* this function
*/
- writel(miiAddr, &mac->mii_mgmt_addr);
- writel(miiCmd, &mac->mii_mgmt_cmd);
+ writel(mii_addr, &mac->mii_mgmt_addr);
+ writel(mii_cmd, &mac->mii_mgmt_cmd);
return status;
}
@@ -249,12 +247,12 @@ int et131x_xcvr_find(struct et131x_adapter *etdev)
/* We need to get xcvr id and address we just get the first one */
for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) {
/* Read the ID from the PHY */
- PhyMiRead(etdev, xcvr_addr,
- (u8) offsetof(struct mi_regs, idr1),
- &idr1);
- PhyMiRead(etdev, xcvr_addr,
- (u8) offsetof(struct mi_regs, idr2),
- &idr2);
+ et131x_phy_mii_read(etdev, xcvr_addr,
+ (u8) offsetof(struct mi_regs, idr1),
+ &idr1);
+ et131x_phy_mii_read(etdev, xcvr_addr,
+ (u8) offsetof(struct mi_regs, idr2),
+ &idr2);
xcvr_id = (u32) ((idr1 << 16) | idr2);
@@ -267,13 +265,13 @@ int et131x_xcvr_find(struct et131x_adapter *etdev)
return -ENODEV;
}
-void ET1310_PhyReset(struct et131x_adapter *etdev)
+void et1310_phy_reset(struct et131x_adapter *etdev)
{
- MiWrite(etdev, PHY_CONTROL, 0x8000);
+ et131x_mii_write(etdev, PHY_CONTROL, 0x8000);
}
/**
- * ET1310_PhyPowerDown - PHY power control
+ * et1310_phy_power_down - PHY power control
* @etdev: device to control
* @down: true for off/false for back on
*
@@ -282,80 +280,76 @@ void ET1310_PhyReset(struct et131x_adapter *etdev)
* Can't you see that this code processed
* Phy power, phy power..
*/
-
-void ET1310_PhyPowerDown(struct et131x_adapter *etdev, bool down)
+void et1310_phy_power_down(struct et131x_adapter *etdev, bool down)
{
u16 data;
- MiRead(etdev, PHY_CONTROL, &data);
+ et131x_mii_read(etdev, PHY_CONTROL, &data);
data &= ~0x0800; /* Power UP */
if (down) /* Power DOWN */
data |= 0x0800;
- MiWrite(etdev, PHY_CONTROL, data);
+ et131x_mii_write(etdev, PHY_CONTROL, data);
}
/**
- * ET130_PhyAutoNEg - autonegotiate control
+ * et1310_phy_auto_neg - autonegotiate control
* @etdev: device to control
* @enabe: autoneg on/off
*
* Set up the autonegotiation state according to whether we will be
* negotiating the state or forcing a speed.
*/
-
-static void ET1310_PhyAutoNeg(struct et131x_adapter *etdev, bool enable)
+static void et1310_phy_auto_neg(struct et131x_adapter *etdev, bool enable)
{
u16 data;
- MiRead(etdev, PHY_CONTROL, &data);
+ et131x_mii_read(etdev, PHY_CONTROL, &data);
data &= ~0x1000; /* Autonegotiation OFF */
if (enable)
data |= 0x1000; /* Autonegotiation ON */
- MiWrite(etdev, PHY_CONTROL, data);
+ et131x_mii_write(etdev, PHY_CONTROL, data);
}
/**
- * ET130_PhyDuplexMode - duplex control
+ * et1310_phy_duplex_mode - duplex control
* @etdev: device to control
* @duplex: duplex on/off
*
* Set up the duplex state on the PHY
*/
-
-static void ET1310_PhyDuplexMode(struct et131x_adapter *etdev, u16 duplex)
+static void et1310_phy_duplex_mode(struct et131x_adapter *etdev, u16 duplex)
{
u16 data;
- MiRead(etdev, PHY_CONTROL, &data);
+ et131x_mii_read(etdev, PHY_CONTROL, &data);
data &= ~0x100; /* Set Half Duplex */
if (duplex == TRUEPHY_DUPLEX_FULL)
data |= 0x100; /* Set Full Duplex */
- MiWrite(etdev, PHY_CONTROL, data);
+ et131x_mii_write(etdev, PHY_CONTROL, data);
}
/**
- * ET130_PhySpeedSelect - speed control
+ * et1310_phy_speed_select - speed control
* @etdev: device to control
* @duplex: duplex on/off
*
* Set the speed of our PHY.
*/
-
-static void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, u16 speed)
+static void et1310_phy_speed_select(struct et131x_adapter *etdev, u16 speed)
{
u16 data;
static const u16 bits[3] = {0x0000, 0x2000, 0x0040};
/* Read the PHY control register */
- MiRead(etdev, PHY_CONTROL, &data);
+ et131x_mii_read(etdev, PHY_CONTROL, &data);
/* Clear all Speed settings (Bits 6, 13) */
data &= ~0x2040;
/* Write back the new speed */
- MiWrite(etdev, PHY_CONTROL, data | bits[speed]);
+ et131x_mii_write(etdev, PHY_CONTROL, data | bits[speed]);
}
/**
- * ET1310_PhyLinkStatus - read link state
+ * et1310_phy_link_status - read link state
* @etdev: device to read
* @link_status: reported link state
* @autoneg: reported autonegotiation state (complete/incomplete/disabled)
@@ -370,8 +364,7 @@ static void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, u16 speed)
* I know your link speed
* I see all the setting that you'd rather keep
*/
-
-static void ET1310_PhyLinkStatus(struct et131x_adapter *etdev,
+static void et1310_phy_link_status(struct et131x_adapter *etdev,
u8 *link_status,
u32 *autoneg,
u32 *linkspeed,
@@ -384,10 +377,10 @@ static void ET1310_PhyLinkStatus(struct et131x_adapter *etdev,
u16 vmi_phystatus = 0;
u16 control = 0;
- MiRead(etdev, PHY_STATUS, &mistatus);
- MiRead(etdev, PHY_1000_STATUS, &is1000BaseT);
- MiRead(etdev, PHY_PHY_STATUS, &vmi_phystatus);
- MiRead(etdev, PHY_CONTROL, &control);
+ et131x_mii_read(etdev, PHY_STATUS, &mistatus);
+ et131x_mii_read(etdev, PHY_1000_STATUS, &is1000BaseT);
+ et131x_mii_read(etdev, PHY_PHY_STATUS, &vmi_phystatus);
+ et131x_mii_read(etdev, PHY_CONTROL, &control);
*link_status = (vmi_phystatus & 0x0040) ? 1 : 0;
*autoneg = (control & 0x1000) ? ((vmi_phystatus & 0x0020) ?
@@ -405,26 +398,26 @@ static void ET1310_PhyLinkStatus(struct et131x_adapter *etdev,
TRUEPHY_POLARITY_INVERTED : TRUEPHY_POLARITY_NORMAL;
}
-static void ET1310_PhyAndOrReg(struct et131x_adapter *etdev,
- u16 regnum, u16 andMask, u16 orMask)
+static void et1310_phy_and_or_reg(struct et131x_adapter *etdev,
+ u16 regnum, u16 and_mask, u16 or_mask)
{
u16 reg;
- MiRead(etdev, regnum, ®);
- reg &= andMask;
- reg |= orMask;
- MiWrite(etdev, regnum, reg);
+ et131x_mii_read(etdev, regnum, ®);
+ reg &= and_mask;
+ reg |= or_mask;
+ et131x_mii_write(etdev, regnum, reg);
}
-/* Still used from _mac for BIT_READ */
-void ET1310_PhyAccessMiBit(struct et131x_adapter *etdev, u16 action,
- u16 regnum, u16 bitnum, u8 *value)
+/* Still used from _mac for BIT_READ */
+void et1310_phy_access_mii_bit(struct et131x_adapter *etdev, u16 action,
+ u16 regnum, u16 bitnum, u8 *value)
{
u16 reg;
u16 mask = 0x0001 << bitnum;
/* Read the requested register */
- MiRead(etdev, regnum, ®);
+ et131x_mii_read(etdev, regnum, ®);
switch (action) {
case TRUEPHY_BIT_READ:
@@ -432,11 +425,11 @@ void ET1310_PhyAccessMiBit(struct et131x_adapter *etdev, u16 action,
break;
case TRUEPHY_BIT_SET:
- MiWrite(etdev, regnum, reg | mask);
+ et131x_mii_write(etdev, regnum, reg | mask);
break;
case TRUEPHY_BIT_CLEAR:
- MiWrite(etdev, regnum, reg & ~mask);
+ et131x_mii_write(etdev, regnum, reg & ~mask);
break;
default:
@@ -444,13 +437,13 @@ void ET1310_PhyAccessMiBit(struct et131x_adapter *etdev, u16 action,
}
}
-void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *etdev,
+void et1310_phy_advertise_1000BaseT(struct et131x_adapter *etdev,
u16 duplex)
{
u16 data;
/* Read the PHY 1000 Base-T Control Register */
- MiRead(etdev, PHY_1000_CONTROL, &data);
+ et131x_mii_read(etdev, PHY_1000_CONTROL, &data);
/* Clear Bits 8,9 */
data &= ~0x0300;
@@ -477,16 +470,16 @@ void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *etdev,
}
/* Write back advertisement */
- MiWrite(etdev, PHY_1000_CONTROL, data);
+ et131x_mii_write(etdev, PHY_1000_CONTROL, data);
}
-static void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *etdev,
- u16 duplex)
+static void et1310_phy_advertise_100BaseT(struct et131x_adapter *etdev,
+ u16 duplex)
{
u16 data;
/* Read the Autonegotiation Register (10/100) */
- MiRead(etdev, PHY_AUTO_ADVERTISEMENT, &data);
+ et131x_mii_read(etdev, PHY_AUTO_ADVERTISEMENT, &data);
/* Clear bits 7,8 */
data &= ~0x0180;
@@ -514,16 +507,16 @@ static void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *etdev,
}
/* Write back advertisement */
- MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, data);
+ et131x_mii_write(etdev, PHY_AUTO_ADVERTISEMENT, data);
}
-static void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *etdev,
+static void et1310_phy_advertise_10BaseT(struct et131x_adapter *etdev,
u16 duplex)
{
u16 data;
/* Read the Autonegotiation Register (10/100) */
- MiRead(etdev, PHY_AUTO_ADVERTISEMENT, &data);
+ et131x_mii_read(etdev, PHY_AUTO_ADVERTISEMENT, &data);
/* Clear bits 5,6 */
data &= ~0x0060;
@@ -551,25 +544,9 @@ static void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *etdev,
}
/* Write back advertisement */
- MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, data);
-}
-
-/**
- * et131x_setphy_normal - Set PHY for normal operation.
- * @etdev: pointer to our private adapter structure
- *
- * Used by Power Management to force the PHY into 10 Base T half-duplex mode,
- * when going to D3 in WOL mode. Also used during initialization to set the
- * PHY for normal operation.
- */
-void et131x_setphy_normal(struct et131x_adapter *etdev)
-{
- /* Make sure the PHY is powered up */
- ET1310_PhyPowerDown(etdev, 0);
- et131x_xcvr_init(etdev);
+ et131x_mii_write(etdev, PHY_AUTO_ADVERTISEMENT, data);
}
-
/**
* et131x_xcvr_init - Init the phy if we are setting it into force mode
* @etdev: pointer to our private adapter structure
@@ -584,15 +561,15 @@ static void et131x_xcvr_init(struct et131x_adapter *etdev)
/* Zero out the adapter structure variable representing BMSR */
etdev->bmsr = 0;
- MiRead(etdev, (u8) offsetof(struct mi_regs, isr), &isr);
- MiRead(etdev, (u8) offsetof(struct mi_regs, imr), &imr);
+ et131x_mii_read(etdev, (u8) offsetof(struct mi_regs, isr), &isr);
+ et131x_mii_read(etdev, (u8) offsetof(struct mi_regs, imr), &imr);
/* Set the link status interrupt only. Bad behavior when link status
* and auto neg are set, we run into a nested interrupt problem
*/
imr |= 0x0105;
- MiWrite(etdev, (u8) offsetof(struct mi_regs, imr), imr);
+ et131x_mii_write(etdev, (u8) offsetof(struct mi_regs, imr), imr);
/* Set the LED behavior such that LED 1 indicates speed (off =
* 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
@@ -603,7 +580,7 @@ static void et131x_xcvr_init(struct et131x_adapter *etdev)
* EEPROM. However, the above description is the default.
*/
if ((etdev->eeprom_data[1] & 0x4) == 0) {
- MiRead(etdev, (u8) offsetof(struct mi_regs, lcr2),
+ et131x_mii_read(etdev, (u8) offsetof(struct mi_regs, lcr2),
&lcr2);
lcr2 &= 0x00FF;
@@ -614,7 +591,7 @@ static void et131x_xcvr_init(struct et131x_adapter *etdev)
else
lcr2 |= 0x0400;
- MiWrite(etdev, (u8) offsetof(struct mi_regs, lcr2),
+ et131x_mii_write(etdev, (u8) offsetof(struct mi_regs, lcr2),
lcr2);
}
@@ -622,113 +599,130 @@ static void et131x_xcvr_init(struct et131x_adapter *etdev)
if (etdev->AiForceSpeed == 0 && etdev->AiForceDpx == 0) {
if (etdev->wanted_flow == FLOW_TXONLY ||
etdev->wanted_flow == FLOW_BOTH)
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_SET, 4, 11, NULL);
else
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_CLEAR, 4, 11, NULL);
if (etdev->wanted_flow == FLOW_BOTH)
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_SET, 4, 10, NULL);
else
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_CLEAR, 4, 10, NULL);
/* Set the phy to autonegotiation */
- ET1310_PhyAutoNeg(etdev, true);
+ et1310_phy_auto_neg(etdev, true);
/* NOTE - Do we need this? */
- ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_SET, 0, 9, NULL);
+ et1310_phy_access_mii_bit(etdev, TRUEPHY_BIT_SET, 0, 9, NULL);
return;
}
- ET1310_PhyAutoNeg(etdev, false);
+ et1310_phy_auto_neg(etdev, false);
/* Set to the correct force mode. */
if (etdev->AiForceDpx != 1) {
if (etdev->wanted_flow == FLOW_TXONLY ||
etdev->wanted_flow == FLOW_BOTH)
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_SET, 4, 11, NULL);
else
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_CLEAR, 4, 11, NULL);
if (etdev->wanted_flow == FLOW_BOTH)
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_SET, 4, 10, NULL);
else
- ET1310_PhyAccessMiBit(etdev,
+ et1310_phy_access_mii_bit(etdev,
TRUEPHY_BIT_CLEAR, 4, 10, NULL);
} else {
- ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_CLEAR, 4, 10, NULL);
- ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_CLEAR, 4, 11, NULL);
+ et1310_phy_access_mii_bit(etdev, TRUEPHY_BIT_CLEAR,
+ 4, 10, NULL);
+ et1310_phy_access_mii_bit(etdev, TRUEPHY_BIT_CLEAR,
+ 4, 11, NULL);
}
- ET1310_PhyPowerDown(etdev, 1);
+ et1310_phy_power_down(etdev, 1);
switch (etdev->AiForceSpeed) {
case 10:
/* First we need to turn off all other advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
if (etdev->AiForceDpx == 1) {
/* Set our advertise values accordingly */
- ET1310_PhyAdvertise10BaseT(etdev,
+ et1310_phy_advertise_10BaseT(etdev,
TRUEPHY_ADV_DUPLEX_HALF);
} else if (etdev->AiForceDpx == 2) {
/* Set our advertise values accordingly */
- ET1310_PhyAdvertise10BaseT(etdev,
+ et1310_phy_advertise_10BaseT(etdev,
TRUEPHY_ADV_DUPLEX_FULL);
} else {
/* Disable autoneg */
- ET1310_PhyAutoNeg(etdev, false);
+ et1310_phy_auto_neg(etdev, false);
/* Disable rest of the advertisements */
- ET1310_PhyAdvertise10BaseT(etdev,
+ et1310_phy_advertise_10BaseT(etdev,
TRUEPHY_ADV_DUPLEX_NONE);
/* Force 10 Mbps */
- ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_10MBPS);
+ et1310_phy_speed_select(etdev, TRUEPHY_SPEED_10MBPS);
/* Force Full duplex */
- ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL);
+ et1310_phy_duplex_mode(etdev, TRUEPHY_DUPLEX_FULL);
}
break;
case 100:
/* first we need to turn off all other advertisement */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
if (etdev->AiForceDpx == 1) {
/* Set our advertise values accordingly */
- ET1310_PhyAdvertise100BaseT(etdev,
+ et1310_phy_advertise_100BaseT(etdev,
TRUEPHY_ADV_DUPLEX_HALF);
/* Set speed */
- ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS);
+ et1310_phy_speed_select(etdev, TRUEPHY_SPEED_100MBPS);
} else if (etdev->AiForceDpx == 2) {
/* Set our advertise values accordingly */
- ET1310_PhyAdvertise100BaseT(etdev,
+ et1310_phy_advertise_100BaseT(etdev,
TRUEPHY_ADV_DUPLEX_FULL);
} else {
/* Disable autoneg */
- ET1310_PhyAutoNeg(etdev, false);
+ et1310_phy_auto_neg(etdev, false);
/* Disable other advertisement */
- ET1310_PhyAdvertise100BaseT(etdev,
+ et1310_phy_advertise_100BaseT(etdev,
TRUEPHY_ADV_DUPLEX_NONE);
/* Force 100 Mbps */
- ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS);
+ et1310_phy_speed_select(etdev, TRUEPHY_SPEED_100MBPS);
/* Force Full duplex */
- ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL);
+ et1310_phy_duplex_mode(etdev, TRUEPHY_DUPLEX_FULL);
}
break;
case 1000:
/* first we need to turn off all other advertisement */
- ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
- ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
/* set our advertise values accordingly */
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
+ et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
break;
}
- ET1310_PhyPowerDown(etdev, 0);
+ et1310_phy_power_down(etdev, 0);
+}
+
+/**
+ * et131x_setphy_normal - Set PHY for normal operation.
+ * @etdev: pointer to our private adapter structure
+ *
+ * Used by Power Management to force the PHY into 10 Base T half-duplex mode,
+ * when going to D3 in WOL mode. Also used during initialization to set the
+ * PHY for normal operation.
+ */
+void et131x_setphy_normal(struct et131x_adapter *etdev)
+{
+ /* Make sure the PHY is powered up */
+ et1310_phy_power_down(etdev, 0);
+ et131x_xcvr_init(etdev);
}
-void et131x_Mii_check(struct et131x_adapter *etdev,
+void et131x_mii_check(struct et131x_adapter *etdev,
u16 bmsr, u16 bmsr_ints)
{
u8 link_status;
@@ -764,13 +758,14 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
* && TRU_QueryCoreType(etdev->hTruePhy, 0) ==
* EMI_TRUEPHY_A13O) {
*/
- u16 Register18;
-
- MiRead(etdev, 0x12, &Register18);
- MiWrite(etdev, 0x12, Register18 | 0x4);
- MiWrite(etdev, 0x10, Register18 | 0x8402);
- MiWrite(etdev, 0x11, Register18 | 511);
- MiWrite(etdev, 0x12, Register18);
+ u16 register18;
+
+ et131x_mii_read(etdev, 0x12, ®ister18);
+ et131x_mii_write(etdev, 0x12, register18 | 0x4);
+ et131x_mii_write(etdev, 0x10,
+ register18 | 0x8402);
+ et131x_mii_write(etdev, 0x11, register18 | 511);
+ et131x_mii_write(etdev, 0x12, register18);
}
/* For the first N seconds of life, we are in "link
@@ -805,7 +800,7 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
* Bring the device back to the state it was during
* init prior to autonegotiation being complete. This
* way, when we get the auto-neg complete interrupt,
- * we can complete init by calling ConfigMacREGS2.
+ * we can complete init by calling config_mac_regs2.
*/
et131x_soft_reset(etdev);
@@ -824,7 +819,7 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
(etdev->AiForceDpx == 3 && (bmsr_ints & MI_BMSR_LINK_STATUS))) {
if ((bmsr & MI_BMSR_AUTO_NEG_COMPLETE) ||
etdev->AiForceDpx == 3) {
- ET1310_PhyLinkStatus(etdev,
+ et1310_phy_link_status(etdev,
&link_status, &autoneg_status,
&speed, &duplex, &mdi_mdix,
&masterslave, &polarity);
@@ -841,20 +836,21 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
* && TRU_QueryCoreType(etdev->hTruePhy, 0)==
* EMI_TRUEPHY_A13O) {
*/
- u16 Register18;
-
- MiRead(etdev, 0x12, &Register18);
- MiWrite(etdev, 0x12, Register18 | 0x4);
- MiWrite(etdev, 0x10, Register18 | 0x8402);
- MiWrite(etdev, 0x11, Register18 | 511);
- MiWrite(etdev, 0x12, Register18);
+ u16 register18;
+
+ et131x_mii_read(etdev, 0x12, ®ister18);
+ et131x_mii_write(etdev, 0x12, register18 | 0x4);
+ et131x_mii_write(etdev, 0x10,
+ register18 | 0x8402);
+ et131x_mii_write(etdev, 0x11, register18 | 511);
+ et131x_mii_write(etdev, 0x12, register18);
}
config_flow_control(etdev);
if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS &&
etdev->RegistryJumboPacket > 2048)
- ET1310_PhyAndOrReg(etdev, 0x16, 0xcfff,
+ et1310_phy_and_or_reg(etdev, 0x16, 0xcfff,
0x2000);
SetRxDmaTimer(etdev);
@@ -868,9 +864,8 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
* primarily by the routines above (although there are a few places elsewhere
* in the driver where this level of access is required).
*/
-
-static const u16 ConfigPhy[25][2] = {
- /* Reg Value Register */
+static const u16 config_phy[25][2] = {
+ /* Reg Value Register */
/* Addr */
{0x880B, 0x0926}, /* AfeIfCreg4B1000Msbs */
{0x880C, 0x0926}, /* AfeIfCreg4B100Msbs */
@@ -906,11 +901,10 @@ static const u16 ConfigPhy[25][2] = {
{0x8010, 46}, /* IdlguardTime */
{0, 0}
-
};
/* condensed version of the phy initialization routine */
-void ET1310_PhyInit(struct et131x_adapter *etdev)
+void et1310_phy_init(struct et131x_adapter *etdev)
{
u16 data, index;
@@ -918,62 +912,66 @@ void ET1310_PhyInit(struct et131x_adapter *etdev)
return;
/* get the identity (again ?) */
- MiRead(etdev, PHY_ID_1, &data);
- MiRead(etdev, PHY_ID_2, &data);
+ et131x_mii_read(etdev, PHY_ID_1, &data);
+ et131x_mii_read(etdev, PHY_ID_2, &data);
/* what does this do/achieve ? */
- MiRead(etdev, PHY_MPHY_CONTROL_REG, &data); /* should read 0002 */
- MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0006);
+ /* should read 0002 */
+ et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data);
+ et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0006);
/* read modem register 0402, should I do something with the return
data ? */
- MiWrite(etdev, PHY_INDEX_REG, 0x0402);
- MiRead(etdev, PHY_DATA_REG, &data);
+ et131x_mii_write(etdev, PHY_INDEX_REG, 0x0402);
+ et131x_mii_read(etdev, PHY_DATA_REG, &data);
/* what does this do/achieve ? */
- MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002);
+ et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0002);
/* get the identity (again ?) */
- MiRead(etdev, PHY_ID_1, &data);
- MiRead(etdev, PHY_ID_2, &data);
+ et131x_mii_read(etdev, PHY_ID_1, &data);
+ et131x_mii_read(etdev, PHY_ID_2, &data);
/* what does this achieve ? */
- MiRead(etdev, PHY_MPHY_CONTROL_REG, &data); /* should read 0002 */
- MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0006);
+ /* should read 0002 */
+ et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data);
+ et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0006);
/* read modem register 0402, should I do something with
the return data? */
- MiWrite(etdev, PHY_INDEX_REG, 0x0402);
- MiRead(etdev, PHY_DATA_REG, &data);
+ et131x_mii_write(etdev, PHY_INDEX_REG, 0x0402);
+ et131x_mii_read(etdev, PHY_DATA_REG, &data);
- MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002);
+ et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0002);
/* what does this achieve (should return 0x1040) */
- MiRead(etdev, PHY_CONTROL, &data);
- MiRead(etdev, PHY_MPHY_CONTROL_REG, &data); /* should read 0002 */
- MiWrite(etdev, PHY_CONTROL, 0x1840);
+ et131x_mii_read(etdev, PHY_CONTROL, &data);
+ /* should read 0002 */
+ et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data);
+ et131x_mii_write(etdev, PHY_CONTROL, 0x1840);
- MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0007);
+ et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0007);
/* here the writing of the array starts.... */
index = 0;
- while (ConfigPhy[index][0] != 0x0000) {
+ while (config_phy[index][0] != 0x0000) {
/* write value */
- MiWrite(etdev, PHY_INDEX_REG, ConfigPhy[index][0]);
- MiWrite(etdev, PHY_DATA_REG, ConfigPhy[index][1]);
+ et131x_mii_write(etdev, PHY_INDEX_REG, config_phy[index][0]);
+ et131x_mii_write(etdev, PHY_DATA_REG, config_phy[index][1]);
/* read it back */
- MiWrite(etdev, PHY_INDEX_REG, ConfigPhy[index][0]);
- MiRead(etdev, PHY_DATA_REG, &data);
+ et131x_mii_write(etdev, PHY_INDEX_REG, config_phy[index][0]);
+ et131x_mii_read(etdev, PHY_DATA_REG, &data);
/* do a check on the value read back ? */
index++;
}
/* here the writing of the array ends... */
- MiRead(etdev, PHY_CONTROL, &data); /* 0x1840 */
- MiRead(etdev, PHY_MPHY_CONTROL_REG, &data);/* should read 0007 */
- MiWrite(etdev, PHY_CONTROL, 0x1040);
- MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002);
+ et131x_mii_read(etdev, PHY_CONTROL, &data); /* 0x1840 */
+ /* should read 0007 */
+ et131x_mii_read(etdev, PHY_MPHY_CONTROL_REG, &data);
+ et131x_mii_write(etdev, PHY_CONTROL, 0x1040);
+ et131x_mii_write(etdev, PHY_MPHY_CONTROL_REG, 0x0002);
}
diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h
index 289d511..c4f9032 100644
--- a/drivers/staging/et131x/et131x.h
+++ b/drivers/staging/et131x/et131x.h
@@ -90,14 +90,14 @@ void EnablePhyComa(struct et131x_adapter *adapter);
void DisablePhyComa(struct et131x_adapter *adapter);
/* et131x_phy.c */
-void ET1310_PhyInit(struct et131x_adapter *adapter);
-void ET1310_PhyReset(struct et131x_adapter *adapter);
-void ET1310_PhyPowerDown(struct et131x_adapter *adapter, bool down);
-void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *adapter,
- u16 duplex);
-void ET1310_PhyAccessMiBit(struct et131x_adapter *adapter,
- u16 action,
- u16 regnum, u16 bitnum, u8 *value);
+void et1310_phy_init(struct et131x_adapter *adapter);
+void et1310_phy_reset(struct et131x_adapter *adapter);
+void et1310_phy_power_down(struct et131x_adapter *adapter, bool down);
+void et1310_phy_advertise_1000BaseT(struct et131x_adapter *adapter,
+ u16 duplex);
+void et1310_phy_access_mii_bit(struct et131x_adapter *adapter,
+ u16 action,
+ u16 regnum, u16 bitnum, u8 *value);
int et131x_xcvr_find(struct et131x_adapter *adapter);
void et131x_setphy_normal(struct et131x_adapter *adapter);
@@ -105,23 +105,18 @@ void et131x_setphy_normal(struct et131x_adapter *adapter);
/* static inline function does not work because et131x_adapter is not always
* defined
*/
-int PhyMiRead(struct et131x_adapter *adapter, u8 xcvrAddr,
+int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvrAddr,
u8 xcvrReg, u16 *value);
-#define MiRead(adapter, xcvrReg, value) \
- PhyMiRead((adapter), (adapter)->stats.xcvr_addr, (xcvrReg), (value))
+#define et131x_mii_read(adapter, xcvrReg, value) \
+ et131x_phy_mii_read((adapter), \
+ (adapter)->stats.xcvr_addr, \
+ (xcvrReg), (value))
-int32_t MiWrite(struct et131x_adapter *adapter,
+int32_t et131x_mii_write(struct et131x_adapter *adapter,
u8 xcvReg, u16 value);
-void et131x_Mii_check(struct et131x_adapter *pAdapter,
+void et131x_mii_check(struct et131x_adapter *pAdapter,
u16 bmsr, u16 bmsr_ints);
-/* This last is not strictly required (the driver could call the TPAL
- * version instead), but this sets the adapter up correctly, and calls the
- * access routine indirectly. This protects the driver from changes in TPAL.
- */
-void SetPhy_10BaseTHalfDuplex(struct et131x_adapter *adapter);
-
-
/* et1310_rx.c */
int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter);
void et131x_rx_dma_memory_free(struct et131x_adapter *adapter);
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index d98db85..9b01f22 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -401,28 +401,28 @@ int et131x_adapter_setup(struct et131x_adapter *etdev)
dev_warn(&etdev->pdev->dev, "Could not find the xcvr\n");
/* Prepare the TRUEPHY library. */
- ET1310_PhyInit(etdev);
+ et1310_phy_init(etdev);
/* Reset the phy now so changes take place */
- ET1310_PhyReset(etdev);
+ et1310_phy_reset(etdev);
/* Power down PHY */
- ET1310_PhyPowerDown(etdev, 1);
+ et1310_phy_power_down(etdev, 1);
/*
* We need to turn off 1000 base half dulplex, the mac does not
* support it. For the 10/100 part, turn off all gig advertisement
*/
if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
+ et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL);
else
- ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
+ et1310_phy_advertise_1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE);
/* Power up PHY */
- ET1310_PhyPowerDown(etdev, 0);
+ et1310_phy_power_down(etdev, 0);
et131x_setphy_normal(etdev);
-; return status;
+ return status;
}
/**
diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c
index 48b4d78..0a810cc 100644
--- a/drivers/staging/et131x/et131x_isr.c
+++ b/drivers/staging/et131x/et131x_isr.c
@@ -385,11 +385,12 @@ void et131x_isr_handler(struct work_struct *work)
/* Read the PHY ISR to clear the reason for the
* interrupt.
*/
- MiRead(etdev, (uint8_t) offsetof(struct mi_regs, isr),
- &myisr);
+ et131x_mii_read(etdev,
+ (uint8_t) offsetof(struct mi_regs, isr),
+ &myisr);
if (!etdev->ReplicaPhyLoopbk) {
- MiRead(etdev,
+ et131x_mii_read(etdev,
(uint8_t) offsetof(struct mi_regs, bmsr),
&bmsr_data);
@@ -397,7 +398,7 @@ void et131x_isr_handler(struct work_struct *work)
etdev->bmsr = bmsr_data;
/* Do all the cable in / cable out stuff */
- et131x_Mii_check(etdev, bmsr_data, bmsr_ints);
+ et131x_mii_check(etdev, bmsr_data, bmsr_ints);
}
}
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 4e9e176..0f12b58 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -221,7 +221,7 @@ int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
if (!capable(CAP_NET_ADMIN))
status = -EPERM;
else
- status = MiRead(etdev,
+ status = et131x_mii_read(etdev,
data->reg_num, &data->val_out);
break;
@@ -229,7 +229,7 @@ int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
if (!capable(CAP_NET_ADMIN))
status = -EPERM;
else
- status = MiWrite(etdev, data->reg_num,
+ status = et131x_mii_write(etdev, data->reg_num,
data->val_in);
break;
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists