| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Jul 2011 11:38:39 -0500
From: Larry Finger <Larry.Finger@...inger.net>
To: Joe Perches <joe@...ches.com>
CC: Chaoming Li <chaoming_li@...lsil.com.cn>,
"John W. Linville" <linville@...driver.com>,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] rtlwifi: Convert printks to pr_<level>
On 07/20/2011 10:51 AM, Joe Perches wrote:
> Use the current logging styles.
> Add pr_fmt where appropriate.
> Remove now unnecessary prefixes from printks.
> Convert hard coded prefix to __func__.
> Add a missing "\n" to a format.
>
> Signed-off-by: Joe Perches<joe@...ches.com>
> ---
> drivers/net/wireless/rtlwifi/base.c | 9 ++-
> drivers/net/wireless/rtlwifi/cam.c | 4 +-
> drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c | 5 +-
> drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 69 ++++++++------------
> drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 11 ++-
> drivers/net/wireless/rtlwifi/rtl8192de/sw.c | 8 +-
> drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 10 ++--
> drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 5 +-
> drivers/net/wireless/rtlwifi/rtl8192se/rf.c | 4 +-
> drivers/net/wireless/rtlwifi/rtl8192se/sw.c | 6 +-
> drivers/net/wireless/rtlwifi/usb.c | 12 ++--
> 11 files changed, 72 insertions(+), 71 deletions(-)
>
> diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
> index bc13533..d88e405 100644
> --- a/drivers/net/wireless/rtlwifi/base.c
> +++ b/drivers/net/wireless/rtlwifi/base.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include<linux/ip.h>
> #include "wifi.h"
> #include "rc.h"
> @@ -397,8 +399,8 @@ void rtl_init_rfkill(struct ieee80211_hw *hw)
> radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw,&valid);
>
> if (valid) {
> - printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
> - rtlpriv->rfkill.rfkill_state ? "on" : "off");
> + pr_info("wireless switch is %s\n",
> + rtlpriv->rfkill.rfkill_state ? "on" : "off");
>
> rtlpriv->rfkill.rfkill_state = radio_state;
>
> @@ -1402,8 +1404,7 @@ MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
> static int __init rtl_core_module_init(void)
> {
> if (rtl_rate_control_register())
> - printk(KERN_ERR "rtlwifi: Unable to register rtl_rc,"
> - "use default RC !!\n");
> + pr_err("Unable to register rtl_rc, use default RC !!\n");
>
> return 0;
> }
> diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
> index 7295af0..b12a668 100644
> --- a/drivers/net/wireless/rtlwifi/cam.c
> +++ b/drivers/net/wireless/rtlwifi/cam.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include "wifi.h"
> #include "cam.h"
>
> @@ -347,7 +349,7 @@ void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr)
> /* Remove from HW Security CAM */
> memset(rtlpriv->sec.hwsec_cam_sta_addr[i], 0, ETH_ALEN);
> rtlpriv->sec.hwsec_cam_bitmap&= ~(BIT(0)<< i);
> - printk(KERN_INFO "&&&&&&&&&del entry %d\n", i);
> + pr_info("&&&&&&&&&del entry %d\n", i);
> }
> }
> return;
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
> index f9f2370..49a064b 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include<linux/firmware.h>
> #include "../wifi.h"
> #include "../pci.h"
> @@ -224,8 +226,7 @@ int rtl92c_download_fw(struct ieee80211_hw *hw)
> u32 fwsize;
> enum version_8192c version = rtlhal->version;
>
> - printk(KERN_INFO "rtl8192c: Loading firmware file %s\n",
> - rtlpriv->cfg->fw_name);
> + pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
> if (!rtlhal->pfirmware)
> return 1;
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
> index 2b34764..814c05d 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include "../wifi.h"
> #include "../efuse.h"
> #include "../base.h"
> @@ -337,7 +339,7 @@ static void _rtl92cu_read_board_type(struct ieee80211_hw *hw, u8 *contents)
> rtlefuse->board_type = boardType;
> if (IS_HIGHT_PA(rtlefuse->board_type))
> rtlefuse->external_pa = 1;
> - printk(KERN_INFO "rtl8192cu: Board Type %x\n", rtlefuse->board_type);
> + pr_info("Board Type %x\n", rtlefuse->board_type);
>
> #ifdef CONFIG_ANTENNA_DIVERSITY
> /* Antenna Diversity setting. */
> @@ -346,8 +348,7 @@ static void _rtl92cu_read_board_type(struct ieee80211_hw *hw, u8 *contents)
> else
> rtl_efuse->antenna_cfg = registry_par->antdiv_cfg; /* 0:OFF, */
>
> - printk(KERN_INFO "rtl8192cu: Antenna Config %x\n",
> - rtl_efuse->antenna_cfg);
> + pr_info("Antenna Config %x\n", rtl_efuse->antenna_cfg);
> #endif
> }
>
> @@ -384,71 +385,57 @@ static void _update_bt_param(_adapter *padapter)
> pbtpriv->bBTNonTrafficModeSet = _FALSE;
> pbtpriv->CurrentState = 0;
> pbtpriv->PreviousState = 0;
> - printk(KERN_INFO "rtl8192cu: BT Coexistance = %s\n",
> - (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
> + pr_info("BT Coexistance = %s\n",
> + (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
> if (pbtpriv->BT_Coexist) {
> if (pbtpriv->BT_Ant_Num == Ant_x2)
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "Ant_Num = Antx2\n");
> + pr_info("BlueTooth BT_Ant_Num = Antx2\n");
> else if (pbtpriv->BT_Ant_Num == Ant_x1)
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "Ant_Num = Antx1\n");
> + pr_info("BlueTooth BT_Ant_Num = Antx1\n");
> switch (pbtpriv->BT_CoexistType) {
> case BT_2Wire:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = BT_2Wire\n");
> + pr_info("BlueTooth BT_CoexistType = BT_2Wire\n");
> break;
> case BT_ISSC_3Wire:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = BT_ISSC_3Wire\n");
> + pr_info("BlueTooth BT_CoexistType = BT_ISSC_3Wire\n");
> break;
> case BT_Accel:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = BT_Accel\n");
> + pr_info("BlueTooth BT_CoexistType = BT_Accel\n");
> break;
> case BT_CSR_BC4:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = BT_CSR_BC4\n");
> + pr_info("BlueTooth BT_CoexistType = BT_CSR_BC4\n");
> break;
> case BT_CSR_BC8:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = BT_CSR_BC8\n");
> + pr_info("BlueTooth BT_CoexistType = BT_CSR_BC8\n");
> break;
> case BT_RTL8756:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = BT_RTL8756\n");
> + pr_info("BlueTooth BT_CoexistType = BT_RTL8756\n");
> break;
> default:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
> - "CoexistType = Unknown\n");
> + pr_info("BlueTooth BT_CoexistType = Unknown\n");
> break;
> }
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_Ant_isolation = %d\n",
> - pbtpriv->BT_Ant_isolation);
> + pr_info("BlueTooth BT_Ant_isolation = %d\n",
> + pbtpriv->BT_Ant_isolation);
> switch (pbtpriv->BT_Service) {
> case BT_OtherAction:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
> - "BT_OtherAction\n");
> + pr_info("BlueTooth BT_Service = BT_OtherAction\n");
> break;
> case BT_SCO:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
> - "BT_SCO\n");
> + pr_info("BlueTooth BT_Service = BT_SCO\n");
> break;
> case BT_Busy:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
> - "BT_Busy\n");
> + pr_info("BlueTooth BT_Service = BT_Busy\n");
> break;
> case BT_OtherBusy:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
> - "BT_OtherBusy\n");
> + pr_info("BlueTooth BT_Service = BT_OtherBusy\n");
> break;
> default:
> - printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
> - "BT_Idle\n");
> + pr_info("BlueTooth BT_Service = BT_Idle\n");
> break;
> }
> - printk(KERN_INFO "rtl8192cu: BT_RadioSharedType = 0x%x\n",
> - pbtpriv->BT_RadioSharedType);
> + pr_info("BT_RadioSharedType = 0x%x\n",
> + pbtpriv->BT_RadioSharedType);
> }
> }
>
> @@ -526,7 +513,7 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
> usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
> *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
> }
> - printk(KERN_INFO "rtl8192cu: MAC address: %pM\n", rtlefuse->dev_addr);
> + pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
> _rtl92cu_read_txpower_info_from_hwpg(hw,
> rtlefuse->autoload_failflag, hwinfo);
> rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
> @@ -665,7 +652,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
> rtl_write_word(rtlpriv, REG_APS_FSMCO, value16);
> do {
> if (!(rtl_read_word(rtlpriv, REG_APS_FSMCO)& APFM_ONMAC)) {
> - printk(KERN_INFO "rtl8192cu: MAC auto ON okay!\n");
> + pr_info("MAC auto ON okay!\n");
> break;
> }
> if (pollingCount++> 100) {
> @@ -819,7 +806,7 @@ static void _rtl92cu_init_chipN_one_out_ep_priority(struct ieee80211_hw *hw,
> }
> _rtl92c_init_chipN_reg_priority(hw, value, value, value, value,
> value, value);
> - printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
> + pr_info("Tx queue select: 0x%02x\n", queue_sel);
> }
>
> static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
> @@ -863,7 +850,7 @@ static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
> hiQ = valueHi;
> }
> _rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
> - printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
> + pr_info("Tx queue select: 0x%02x\n", queue_sel);
> }
>
> static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
> index a90c09b..194fc69 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
> @@ -26,6 +26,9 @@
> * Larry Finger<Larry.Finger@...inger.net>
> *
> ****************************************************************************/
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include<linux/module.h>
>
> #include "../wifi.h"
> @@ -213,14 +216,14 @@ bool rtl92c_init_llt_table(struct ieee80211_hw *hw, u32 boundary)
> for (i = 0; i< (boundary - 1); i++) {
> rst = rtl92c_llt_write(hw, i , i + 1);
> if (true != rst) {
> - printk(KERN_ERR "===> %s #1 fail\n", __func__);
> + pr_err("===> %s #1 fail\n", __func__);
> return rst;
> }
> }
> /* end of list */
> rst = rtl92c_llt_write(hw, (boundary - 1), 0xFF);
> if (true != rst) {
> - printk(KERN_ERR "===> %s #2 fail\n", __func__);
> + pr_err("===> %s #2 fail\n", __func__);
> return rst;
> }
> /* Make the other pages as ring buffer
> @@ -231,14 +234,14 @@ bool rtl92c_init_llt_table(struct ieee80211_hw *hw, u32 boundary)
> for (i = boundary; i< LLT_LAST_ENTRY_OF_TX_PKT_BUFFER; i++) {
> rst = rtl92c_llt_write(hw, i, (i + 1));
> if (true != rst) {
> - printk(KERN_ERR "===> %s #3 fail\n", __func__);
> + pr_err("===> %s #3 fail\n", __func__);
> return rst;
> }
> }
> /* Let last entry point to the start entry of ring buffer */
> rst = rtl92c_llt_write(hw, LLT_LAST_ENTRY_OF_TX_PKT_BUFFER, boundary);
> if (true != rst) {
> - printk(KERN_ERR "===> %s #4 fail\n", __func__);
> + pr_err("===> %s #4 fail\n", __func__);
> return rst;
> }
> return rst;
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
> index 0883774..351765d 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include<linux/vmalloc.h>
>
> #include "../wifi.h"
> @@ -170,10 +172,8 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
> }
>
> if (!header_print) {
> - printk(KERN_INFO "rtl8192de: Driver for Realtek RTL8192DE"
> - " WLAN interface");
> - printk(KERN_INFO "rtl8192de: Loading firmware file %s\n",
> - rtlpriv->cfg->fw_name);
> + pr_info("Driver for Realtek RTL8192DE WLAN interface\n");
> + pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
> header_print++;
> }
> /* request fw */
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
> index b1d0213..73142a9 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include "../wifi.h"
> #include "../efuse.h"
> #include "../base.h"
> @@ -465,8 +467,7 @@ static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data)
> if ((tmpvalue& BIT(6)))
> break;
>
> - printk(KERN_ERR "wait for BIT(6) return value %x\n",
> - tmpvalue);
> + pr_err("wait for BIT(6) return value %x\n", tmpvalue);
> if (waitcount == 0)
> break;
>
> @@ -1255,8 +1256,7 @@ static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
> if ((tmp& BIT(6)))
> break;
>
> - printk(KERN_ERR "wait for BIT(6) return value %x\n",
> - tmp);
> + pr_err("wait for BIT(6) return value %x\n", tmp);
>
> if (waitcnt == 0)
> break;
> @@ -1315,7 +1315,7 @@ static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
> if (u1btmp& BIT(7)) {
> u1btmp&= ~(BIT(6) | BIT(7));
> if (!_rtl92s_set_sysclk(hw, u1btmp)) {
> - printk(KERN_ERR "Switch ctrl path fail\n");
> + pr_err("Switch ctrl path fail\n");
> return;
> }
> }
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
> index 81a5aa4..f27171a 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include "../wifi.h"
> #include "../pci.h"
> #include "../ps.h"
> @@ -1016,8 +1018,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
> rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
>
> if (rtstatus != true) {
> - printk(KERN_ERR "_rtl92s_phy_bb_config_parafile(): "
> - "AGC Table Fail\n");
> + pr_err("%s(): AGC Table Fail\n", __func__);
> goto phy_BB8190_Config_ParaFile_Fail;
> }
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
> index c6e3a4c..0ad50fe 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include "../wifi.h"
> #include "reg.h"
> #include "def.h"
> @@ -507,7 +509,7 @@ bool rtl92s_phy_rf6052_config(struct ieee80211_hw *hw)
> }
>
> if (rtstatus != true) {
> - printk(KERN_ERR "Radio[%d] Fail!!", rfpath);
> + pr_err("Radio[%d] Fail!!\n", rfpath);
> goto fail;
> }
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
> index 1c6cb1d..3876078 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
> @@ -27,6 +27,8 @@
> *
> *****************************************************************************/
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include<linux/vmalloc.h>
>
> #include "../wifi.h"
> @@ -183,8 +185,8 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
> return 1;
> }
>
> - printk(KERN_INFO "rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE\n"
> - " Loading firmware %s\n", rtlpriv->cfg->fw_name);
> + pr_info("Driver for Realtek RTL8192SE/RTL8191SE\n"
> + "Loading firmware %s\n", rtlpriv->cfg->fw_name);
> /* request fw */
> err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
> rtlpriv->io.dev);
> diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
> index a9367eb..8b1cef0 100644
> --- a/drivers/net/wireless/rtlwifi/usb.c
> +++ b/drivers/net/wireless/rtlwifi/usb.c
> @@ -24,6 +24,9 @@
> * Hsinchu 300, Taiwan.
> *
> *****************************************************************************/
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include<linux/usb.h>
> #include "core.h"
> #include "wifi.h"
> @@ -104,9 +107,8 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request,
> pdata, len, 0); /* max. timeout */
>
> if (status< 0)
> - printk(KERN_ERR "reg 0x%x, usbctrl_vendorreq TimeOut! "
> - "status:0x%x value=0x%x\n", value, status,
> - *(u32 *)pdata);
> + pr_err("reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x\n",
> + value, status, *(u32 *)pdata);
> return status;
> }
>
> @@ -316,7 +318,7 @@ static int _rtl_usb_init_rx(struct ieee80211_hw *hw)
> rtlusb->usb_rx_segregate_hdl =
> rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl;
>
> - printk(KERN_INFO "rtl8192cu: rx_max_size %d, rx_urb_num %d, in_ep %d\n",
> + pr_info("rx_max_size %d, rx_urb_num %d, in_ep %d\n",
> rtlusb->rx_max_size, rtlusb->rx_urb_num, rtlusb->in_ep);
> init_usb_anchor(&rtlusb->rx_submitted);
> return 0;
> @@ -580,7 +582,7 @@ static void _rtl_rx_completed(struct urb *_urb)
> } else{
> /* TO DO */
> _rtl_rx_pre_process(hw, skb);
> - printk(KERN_ERR "rtlwifi: rx agg not supported\n");
> + pr_err("rx agg not supported\n");
> }
> goto resubmit;
> }
Joe,
In general these look good, but why not define pr_fmt in rtlwifi/wifi.h. That
header is used by every source file, and you only need the define once.
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists